Windows reports that the "USB-IF xHCI USB Host Controller" device is not working properly.

I have been receiving the following error and instructions to fix it for a long time now, prior to updating to Windows 8.1:
A device is not working properly
Windows reports that the "USB-IF xHCI USB Host Controller" device is not working properly.
Recommended solution to the problemUse Windows Update to check whether new device drivers are available. Proceed as follows:
Open Device Manager
Search in the device manager for the device whose driver you would like to update and double-click on the device name. You may first have to enable the "Show hidden devices" entry in the "View" menu.
Switch to the Driver tab, click Update driver and follow the instructions
When I follow the instructions and try to update the driver, I am told "The best driver software for your device is already installed."
How do I update the driver to stop receiving the error?
This question was solved.
View Solution.

I have solved the initial problem.
I found the solution on the Forum at http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03926756&tmp_task=solveCategory&cc=us&dlc=en&la...

Similar Messages

When i connect my iphone 5 to my pc using the usb cable, my device is not recognized yet when connected to a power source, it charges normally. What should i do to rectify the problem and read sth about debris being in the usb. How do i remove that?

When i connect my iphone 5 to my pc using the usb cable, my device is not recognized yet when connected to a power source, it charges normally. What should i do to rectify the problem and read sth about debris being in the usb. How do i remove that?

iOS: Device not recognised in iTunes
Windows: http://support.apple.com/kb/TS1538

TS5376 I'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly.

'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly. I have even done a repair to see if that works and it has not. Has anyone else found a new way to get it working?

Try Troubleshooting issues with iTunes for Windows updates.
tt2

I bought a redeem card and it wont work is says that the gift certificate or prepaid card you entered has not been properly activated

I bought a redeem card and it wont work is says that the gift certificate or prepaid card you entered has not been properly activated

You will need to contact the iTunes Store.

HT2693 How do you contact Apple by email to report one of their pre-installed iPad Apps (ie Calender) is not working properly?

How do you contact Apple by email to report one of their pre-installed iPad Apps (ie Calender) is not working properly?
On trying to open month of March 2013 the pre-installed calendar just shuts down and closes. Have tried restarting iPad but this didn't help and because its a pre-installed App am unable to re-install it. Is this a universal problem or just affecting me? Tried searching for support in both App Store and on Apple site and can't see how to report this.

Feedback
http://www.apple.com/feedback

HT4623 Hi, After updating my phone to the iOS 7, it looks like its keypad is not working properly like It gets a little hanged. What would I do solve this?

Hi, After updating my phone to the iOS 7, it looks like its keypad is not working properly like It gets a little hanged. What would I do solve this?

Thanks
it really works.

Mac USB Keyboard Cntrl + F# commands not working properly

Hello folks,
I have a mac keyboard connected to my MBA through USB, the issue is that the control + F# shortkeys don't work properly.
E.g pressing ctrl + F3 should take me to the desktop ( the sliding movement of the windows ), but instead it switches between windows or something..
Even though it says in the system setting that pressing ctrl + F3 should take me there.
The keyboard in question is a Mac keyboard also. The commands works just fine when I click only the F# buttons on the MBA's keyboard.
Anyone has stumbled upon this previously or know any solution? You gotta love the Mac keycommands.
Thanks

Apple menu -> System Preferences -> Keyboard (and Mouse depending on Mac OS X revision) -> Keyboard
change the use all F1, F2 etc... keys as standard function keys setup.
Command + key usually works for control commands you are used to on Windows, when working with Mac OS X applications.

The keys on my mac book pro (2009) are not working properly, both letters and numbers. I think I pressed something,but I cannot find a numlock key or other to undo this problem

Both the letters and numbers on my mac book pro (2009) are not working correctly, but the caplocks key still lights up,the delete key is like a back key,the o key is enter,etc. I think I must of pressed a button but I cannot find numlock or the action to fix it back to normal.
Need Help Please

Try this. Open one of your files. The window that contains your picture is named at the top. Command click on the name and you'll see the entire path starting with its name and then moving to the folder, the folder it is contained in, etc all the way to down to the hard drive volume name. This should tell you where to find the folder.

The button on my iPod touch is hard and not working properly

I have bought an iPod touch 4G est year (2012) and the start button is hard and sometimes when I give once calcase responds as if twice. I have an iPad and the button is softer and I have friends who have an iPhone and is also soft.
Regards.

Try:
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

I cannot pick up Wi Fi in the area of my house that is my office. For a windows laptop I use a plug in (to the mains electric) booster which connects via the USB port. This will not work on MacbookPro as the USB will not recognise it. Why is this?

Do I need the ethernet to thunderbolt adapter available at £25 from apple store? Will this work?

Hi -before you go buying new cables, I would ask, is your booster only designed for Windows computers or does it have also have an installation setup with drivers for Macs - this could be why the Mac doesn't recognize it.

Very sick Macbook Pro OS v 10.6.8 - initially running slow so I tried backing up to Time Machine and reloading the OS but the install disk failed. I was able to recover from the Time Machine back up but many applications are not working properly. Help!

I am also no longer able to back up using Time Machine (backups fail), can't access iPhoto (which was a problem before attempting to reload OS) and I suspect other apps are no longer working. The computer is however running faster in Safari and Mail...any suggestions would be greatly appreciated.

If there are any files you can transfer to a regular storage drive do that first and then disconenct all drives.
Hold c boot off the 10.6.8 disk and use Disk Utility to Erase with Zero option the hard drive, takes some time, let it complete as it's mapping off any bad or failing sectors.
Then install 10.6. log in and update to 10.6.8 (important!)
Now use Migration Assistant to transfer over just your user files, we need to rescue those first out of TimeMachine's EVIL clutches, once you've got that, transfer them to the regular storage drive and disconnect.
Note: if your 10.6 disk fails, call Apple for a replacement, you need the machine specific version, the 10.6.3 retial doesn't have iLife and only works for machines pre 10.6.3 release, not afterwards. Factory installed 10.6.4 machines and afterwards need machine specific disks.
Then either:
Log into the admin/first set up user on the machine and delete the Migrated user, then reboot and use Migration assistant again to TM everything this time
Or
Just install all your programs again from fresh sources.
If your TM drive is really hosed, then you'll need Data Rescue $99 to read the TM files directly and transfer the results to another regular storage drive (not the first one just in case), then pick through the debris and locate your files and transfer them to another drive.
I don't like TimeMachine, but for newbies it's better than nothing.
(I prefer cloning my entire OS X parititon instead, I can access it from any computer (Linux, Mac or PC) and I also can boot my Mac from it. I use Carbon Copy Cloner, but that's for later once your all better. )

The system Pages library and its RSS feed do not work properly in SharePoint 2010

This question is about RSS feed for the system 'Pages' library in SharePoint 2010.
Now there are 5 'News' pages in the system 'Pages' library. In each news page there is one field called 'Title' for the news title. One of the news page is named 'FileNamePage5.aspx', and the news title is 'This is the title of page5'.
I have enabled RSS in Site Settings, and configured RSS Settings for the 'Pages' library from the Communications section via Document Library Settings. I selected a few columns to display in the RSS description, including the 'Title' column. In the RSS feed
(XML file) of the system 'Pages' library, I checked the XML source code, and found the news page file name appearing in the <title> tag below within the feed (XML source code).
<title>FileNamePage5</title>
and the original news title 'This is the title of page5' was appearing in the <description> tag in the feed (XML sorce code)
<description><![CDATA[<div> ... This is the title of page5... </div>]]></description>.
This would make it hard to extract ONLY the original news title (This is the title of page5) out of the feed via XSLT, because the data within the <description> tag in the feed also contains data from all other selected columns defined via the RSS
Setting. If I did not select the 'Title' column via RSS Setting above, I even could not find the orinigal news title in the RSS feed.
This is happening for all other news pages in the system 'Pages' library. Is this what SharePoint 2010 normally does? or is something wrong with the settings for site or the system 'Pages' library?
How to display ONLY the original news title (This is the title of page5) in the <title> tag in the RSS feed. Please Help me to resolve this issue.
谢亚军@Sydney

Hi,
According to your description, my understanding is that you want to display the value in Title column of Pages library in title tag in RSS Feed in SharePoint.
I tested the same scenario per your post, the title tag in RSS Feed displayed the value of Name column in libraries and displayed the value of Title column in lists.
It is by design and there is no OOB way to change the default column mapping in RSS Feed.
I recommend to customize your own RSS Feed style sheet to make the title displays the value of Title column in SharePoint libraries.
Here is a link about customizing the RSS Feed for document library for you to take a look:
http://markeev.com/Articles/sharepoint-blog-rss.aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

I updated my phone with the update for applewatch and now my phone is not working properly with hondalink. Can anyone help?

I just updated my phone this morning. It's the new update for the apple watch. I have a 2015 honda fit with honda link. I usually play my spotify through the ''ipod'' source because it shows all of the song information. Since the update it will not play through the i pod source even if it is plugged into the car. Can anyone tell me how to either make the song information show up when I play it through bluetooth or how to make it play through the i pod source again?

Hi mrsmaybe,
I'm sorry to hear you are having issues with your iPhone after a recent update. If you continue to have issues connecting your iPhone to your car's stereo system, either hard wired or via Bluetooth, you may find the troubleshooting steps outlined in the following article helpful:
Get help using your iPhone, iPad, or iPod touch with your car stereo - Apple Support
Regards,
- Brenden

HT1414 after a software update the device is not working properly and can not open any website.

I can operate it properly after an software update . Now no website cannot be opened and cannot get emails. Main thing cannot go to tunes and app store .

First Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414

USB Host Controller not recognized by Windows 7.

Just installed Windows 7 in a1130n desktop. The USB Host Controller and the Std USB Host Controller are not recognized by the operating system. The USB ports and the media memory ports on the front panel will not work.

My HP Z400 is suffering from the same problem. Did you discover a solution?

Windows reports that the "USB-IF xHCI USB Host Controller" device is not working properly.

Similar Messages

Maybe you are looking for