Windows RT 8.1 driver for HP C4680

I have a new Windows Surface RT with 8.1 OS. I have an HP C4680 that has worked very well for me with my two Win 7 computers, but my new Surface and C4680 are having a problems. Sometimes the C4680 willprint fine from the Surface, but then other times it will say "Not Compatible". I can NOT print PDF files nor can I Scan to or from the printer. I've check as much of HP's support section as I can and Microsoft says; go to HP Support for help. Can anyone help with an updated driver or a work around? Thanks

Hello bobmp50. Thank you for posting on the HP Forums. I understand the tablet intermittently experiences issues, when using the printer. To commence troubleshooting, please uninstall and reinstall the printer software.
I would like you to perform a Level 3 Uninstall. To do this, please apply these steps:
a) On your keyboard, press the Windows key and the letter "R" key to open the Run windows. In the search bar type %temp% and hit enter.
b) Locate the correct folder starting with "7z" (the correct folder contains "Util" and "CCC" folders).
c) Open folder "Util".
d) Open folder "CCC".
e) Please run the L3uninstall.bat.
f) When the uninstall has completed, restart the computer.
Once you uninstall the software, please install the software using the Printer Install Wizard. For more information on this utility, please reference this document: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02691615
Please provide the results of your troubleshooting. I'm only here to help!
Mario
I worked on behalf of HP.

Similar Messages

Windows 7 64 bits driver for hp colour laserjet 2840

Where to find Window 7 64-bit driver for HP Colour LaserJet 2840 all-in-one printer full complete version?

Hello B-I-F,
The drivers for the HP Color Laserjet 2840 are already "built" into Windows 7. Here is a link regarding how to install them:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02536257
Also, for future reference, the HP Color LaserJet 2800 All-in-One Printer series are commercial printers. I recommend posting in the forum for HP Business Support for a better chance at finding a solution.
Here is the link to the Commercial Laserjet board:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Windows 7 64 bit driver for the Zen Vision M?

- Where EXACTLY can I find the Windows 7 64-bit driver for the Zen Vision M? My new computer came with it installed in Windows Media Player 2, but the driver became corrupt. I can't seem to find that driver on the Creative or Microsoft download websites. Please Help!

The driver is nati've to Windows. Creative does not write the MTP driver. I would suggest re-install WMP2 or contact Microsoft for advice if it is corrupt. As for software to use the player on a 64 Win 7system? there is nothing for the Vision M. You may want to read this page? http://support.creative.com/KB/showarticle.aspx?sid=605&h=3

Windows 7 64-bit driver for Hp ENVY 15-q203tx

can you give me windows 7 64-bit driver for Hp ENVY 15-q203tx.some our program and system is not working with windows 8.1

Hi:
See if the W7 x64 drivers and software from this model work on yours. Don't use any BIOS or firmware files from this model.
To install the graphics, you have to install the Intel chipset installation utility first and reboot.
Then install the Intel HD graphics driver and reboot.
Then install the Nvidia graphics driver and reboot.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=7200...

Where can i find windows 7 64 bit driver for macbook pro 8,1 ?

Where can i find windows 7 64 bit driver for macbook pro 8,1 ?

Boot Camp Assistant 4.x in Lion
Apple Boot Camp Support

How to install Windows 7 64 bit driver for Canon i9100 Printer?

When I try to install my Canon i9100 printer on my HP laptop running Windows 7 Professional 64 bit, Windows cannot locate a driver. Visiting the Canon website, I find an update module for the Windows driver. Canon says the printer MUST be installed using Windows Updater before their driver update can be installed. I have tried everything, but I cannot get Windows to find a driver. Windows Updater says that my computer is Up To Date.
What am I doing wrong?
Thank you,
David

Hi Honeycutt,
The Windows 7 driver for your i9100 is only available from Microsoft through Windows Update. Please try Microsoft's web page for assistance with troubleshooting this:
http://windows.microsoft.com/en-us/windows7/find-and-install-printer-drivers
If you continue to have difficulties, please contact our support group using the following link:
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Windows 7 (64 bit) driver for the matshita bd-cmb uj-120 ata device for my hp pavillion dv6478

I recently upgrade my OS from Vista 64 bit to Windows 7 64 bit and the driver for my DVD player has a yellow question mark on it and I need to know if there is a driver for matshita bd-cmb uj-120 ata device for windows 7 64 bit

Hi,
Hope this helps:
http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Windows 7 64-bit driver for Canon Digital Rebel XT

How do I interface my Canon Digital Rebel XT with a computer running Windows 7 64-bit?

You are correct. Canon does not provide a driver for Windows 7 64-bit. You have to change the communication mode in your camera and then use Windows Photo Gallery or other software to transfer the photos. Here is the response that I received from Canon tech support (it works):
"To connect your camera to a Windows Vista or Windows 7 computer, you'll need to change the communication mode.
To set your camera up for this, please do the following:
With the camera disconnected from the computer, turn the camera on. Press the "Menu" button. Now select the [Wrench, Hammer, 2] tab. Scroll down to "Communication" and press the "Set" button.
Select the [Print/PTP] and press "Set". This process is more completely described (and illustrated too!) on page 121 of your Digital Rebel XT Instruction Manual.
Now connect your camera to your computer and turn the camera on. Your computer should now recognize and have access to your Digital Rebel XT.
Unfortunately, Canon software cannot communicate with the Rebel XT when operating in this mode.
You may download your pictures using Windows Photo Gallery, or you may use a card reader to download images. If you haven't already done so, you may retrieve and install this program from Microsoft's download.live.com."

Windows does not recognize driver for pci-4461

Hello,I am currently running windows xp with labview 7.0 on my computer. Recently trying purchased and trying to install PCI-4461 Audio Analyzer PC card. I downloaded the latest driver 9.0.2 off the NI website. After the install I verified the driver exist by using the Measurement & Automation tool. However, window does not recognize any driver for the hardware. When I point it to the directory where the driver is "suppose" to exist, windows gives me an error message saying that the driver does not exist or is corrupted. I've tried uninstalling and reinstalling several times. Has anyone ran into this problem and can give me some advise? I know that the version on DAQmx 9.0.2 is not compatible with the version of labView I am running. However it should not affect windows from locating and installing hardware. Thank you,Ruth

Hi Ruth,
Did you install the PCI-4461 card in your computer before or after you installed the DAQmx 9.0.2 drivers? It would be best to install the drivers first and then the card. Windows XP will pop up the New Hardware Wizard, saying it detected new hardware. Click Next, and then to Search for Drivers Automatically. Do not try to navigate and select the appropriate driver folder. As long as the drivers are installed correctly Windows will be able to find the correct driver automatically.
You can also remove the PCI-4461 card and try it in a different PCI slot. This will cause the new hardware wizzard to appear on the next restart.
Eric S.
Eric S.
AE Specialist | Global Support
National Instruments

Windows XP compatible Audio Driver for C770TU laptop

Hi i m using XP for my operations compatiblity, but my laptop wont have a compatible audio driver for XP. Thank full if got a proper audio driver for my laptop compatible with Windows XP...

Hi,
Before Conexant Universal Audio Architecture (UAA) here
Conexant High Definition Audio Drivers here
This will create a swsetup folder in c drive ("C:\swsetup\sp34200")
Installing Audio drivers may result in an error. But continue with the following steps to get the audio driver installed correctly.
Open the Device Manager:
1. Click on Start and select Run. Now type devmgmt.msc and press enter.
2. Right click on "Audio device on High Definition Audio Bus" and click Update driver.
3. Select "Install from a list or specific location"
4. Click Next. Then select "Don't search, I will choose the driver to install"
5. Click Next and then select "Sound, video and game controller" from the list.
6. Click Next and then click Have Disk.
7. Click Browse C:\swsetup\sp34200 folder and select the .inf (wis30b2a) file and click open and Continue with the onscreen instructions.
Similarly install Modem Drivers:
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Is there going to be a Windows 8 (64 bit) driver for Sony DPP-EX5 Photo printer?

I have the DPP-EX5 Photo Printer and love it. Currently connected to my Windows XP machine. I just bought a Windows 8 64 bit computer, but the site
http://esupport.sony.com/US/p/model-home.pl?mdl=DPPEX5&LOC=3#/downloadTab does not show a Windows 8 driver. Will the Windows 7 64 bit driver work with Windows 8 64 bit?

Well, since no one replied, I went ahead and downloaded the Windows XP driver for DPP-EX5 printer and installed it onto my Windows 8 64 bit machine, and presto, it worked. I'm a happy camper.

Windows can't find driver for ipod nano 7th generation

I just got the IPod Nano 7th generation. When I plugged I in the computer will pick up the apple mobile storage device usb driver, but I get an error for the iPod saying that no driver was found. I have tried connecting to different usb ports and also tried uninstalling anything related to the iPod or iTunes. So, any help would be appreciated.

Ok I fixed the problem I had. I went under device manager and right-clicked the ipod icon, and told it to update the driver. For the update though I didn't use the automatic search. I told it to search in the location (windows/winsxs) and it found the driver. I hope this helps somebody else.
Since I didn't mention it earlier I have Windows 7 64-bit.

Where can I get the Windows 7 64 bit driver for the MBP (6,2)?

I have to install Windows 7 for work. I have my hard drive partitioned for triple boot, with Ubuntu 64 bit on one partition, and Windows 7 64 bit enterprise installed on another. Both boot fine; Ubuntu found all its drivers automatically (well done, guys!), but Windows of course cannot. Boot camp assistant refuses to download the drivers because I've already partitioned the drive. (Pardon my frustration, but that is a completely brain-damaged software design decision. -1 to apple.)
Is there any way to get the drivers?? Even just for the wireless card?? This is unbelievably frustrating. It's 2011 - stuff is supposed to 'just work,' and playing coy little hide-the-hardware-driver games does not 'just work'.

Alas, no dice. I was able to skip the compatibility check and run the bootcamp installer, and the 3.1 and 3.2 updates. However, I still have no wireless. The device manage shows it as an unknown network card.
linux lspci identifies the ethernet and wifi cards as:
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5764M Gigabit Ethernet PCIe (rev 10)
03:00.0 Network controller: Broadcom Corporation BCM43224 802.11a/b/g/n (rev 01)
the ethernet card is recognized in windows, but the BCM43224 is not.
under linux the BCM43224 works out of the box using the standard "wl" driver with Broadcom's recently open-sourced firmware.
But I'm having a hard time finding any other Windows drivers for it: searching broadcom's site and windows support doesn't give me anything, and google just gives me loads of what look like pay-to-download scam sites and malware. Have I entered some weird parallel reality where wifi support is better in linux than in windows? :lol: that can't be, maybe I'm not configuring something correctly.

Hi Im using OS Windows 7 Professional 32bit driver for apple ipad air in order to transfer photoes from ipad to hp laptop

Unable to transfer photoes from ipad to windows 7 laptop.
Error message
"This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)"

That is one heck of a post for a newcomer here. Your instructions worked like a charm, with one exception:
When uninstalling the Broadcom Device, I had to check the box to delete the driver, and then had to scan for new hardware to get the device to show back up. Then I was able to load the edited driver software.
I am not complaining, but very grateful, as I was pulling my hair out on this one.

Windows 7 64 Bit Driver for Designjet 500ps PCL3GUI

I have just upgraded my PC to windows 7 64 bit. We use a Designjet 500ps plotter - wothout the HPGL2 card, so the driver needs to run on PCL3GUI.
The HP site doesnt have any drivers apart from the HPGL2 for 64 bit.
Does anyone know a workaround i can use for this?
Thanks
andy

The drivers for XP x64 were posted in the Designjet forum in a few places. I cannot find the link where I got the version I am currently using, it is a later version than the one in the link above and has some better features for scaling prints. I will attach it here, you can download it and unzip it to a directory. Next go to the Devices and Printers folder, Add a Printer, pick the proper port and then select Have Disk and point to the directory where you unzipped the driver. The file includes a number of Designjet models including the four versions of the 650C (A and B versions in 24" and 36").
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V
Attachments:
pl532en.zip ‏1924 KB

Windows RT 8.1 driver for HP C4680

Similar Messages

Maybe you are looking for