Windows samba share shows "zero KB" for file size....

Upgraded, clean install, to leopard and now I see "Zero KB" for file size on my Windows Home Server samba shares. Before the upgrade all that info was displayed but afterwards that info is gone. The only changed on my network was upgrading to Leopard. My linux samba server still works perfectly with 10.5 but the windows samba shares are not. I can browse, mount and copy files to and from the windows samba shares but the file size info isn't displayed. The file size isn't even displayed when I "Get Info" on a file. Previously using 10.4 all was working perfectly and all info was displayed and or was available if I wanted it. Not sure if it is something to do with how Windows Home Server handles samba or if it is how Leopard handles windows samba shares. No settings were changed on my network from when I was running 10.4. The only change on my home network/hardware has been upgrading to Leopard! No other changes were made to any servers or computers that were previously working perfectly with 10.4. Other than this "Zero KB" issue all has gone quite smoothly.

I removed the . (and moved the directory to match) but I still have the same issue.
Here's the smbd.log after a rebooting and then restarting samba:
[2010/05/04 07:25:41.262266, 0] smbd/server.c:500(smbd_open_one_socket)
smbd_open_once_socket: open_socket_in: Address already in use
[2010/05/04 07:25:41.266578, 0] smbd/server.c:500(smbd_open_one_socket)
smbd_open_once_socket: open_socket_in: Address already in use
[2010/05/04 07:26:01.041577, 1] smbd/server.c:267(remove_child_pid)
Scheduled cleanup of brl and lock database after unclean shutdown
[2010/05/04 07:26:21.051370, 1] smbd/server.c:240(cleanup_timeout_fn)
Cleaning up brl and lock database after unclean shutdown
[2010/05/04 07:26:45.716653, 1] smbd/server.c:267(remove_child_pid)
Scheduled cleanup of brl and lock database after unclean shutdown
[2010/05/04 07:36:46.016675, 0] smbd/server.c:500(smbd_open_one_socket)
smbd_open_once_socket: open_socket_in: Address already in use
[2010/05/04 07:36:46.017386, 0] smbd/server.c:500(smbd_open_one_socket)
smbd_open_once_socket: open_socket_in: Address already in use
And log.nmbd:
[2010/05/04 07:25:41, 0] nmbd/nmbd.c:857(main)
nmbd version 3.5.2 started.
Copyright Andrew Tridgell and the Samba Team 1992-2010
[2010/05/04 07:26:48.718046, 0] nmbd/nmbd.c:71(terminate)
Got SIGTERM: going down...
[2010/05/04 07:27:26, 0] nmbd/nmbd.c:857(main)
nmbd version 3.5.2 started.
Copyright Andrew Tridgell and the Samba Team 1992-2010
[2010/05/04 07:27:26.544934, 0] nmbd/nmbd.c:696(open_sockets)
[2010/05/04 07:36:46, 0] nmbd/nmbd.c:857(main)
nmbd version 3.5.2 started.
Copyright Andrew Tridgell and the Samba Team 1992-2010

Similar Messages

When i open a new document, my "width" and "lenght" add two zeros automatically to file size??? For example basic A4 size in mm is 210 00mm x 297 00mm? And i can´t do nothing about it! Why on earth?

When i open a new document, my "width" and "lenght" add two zeros automatically to file size??? For example basic A4 size in mm is 210 00mm x 297 00mm? And i can´t do nothing about it! Why on earth?
This "error note" must have something to do about it?

elppaelo,
You may try the list.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save curent artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

My mac says that it has 40 gb of movies on it but when i finder search for file size, and for file type it gives me no videos

My mac says that it has 40 gb of movies on it but when i finder search for file size, and for file type it gives me no videos or movies. I have called apple 3 times and each time they do the same thing and then do something that takes awhile to finish so we hang up and then it never works.
Please Help

each time they do the same thing
And what thing might that be?

4GB File Size Limit in Finder for Windows/Samba Shares?

I am unable to copy a 4.75GB video file from my Mac Pro to a network drive with XFS file system using the Finder. Files under 4GB can be dragged and dropped without problems. The drag and drop method produces an "unexepcted error" (code 0) message.
I went into Terminal and used the cp command to successfully copy the 4.75GB file to the NAS drive, so obviously there's a 4GB file size limit that Finder is opposing?
I was also able to use Quicktime and save a copy of the file to the network drive, so applications have no problem, either.
XFS file system supports terabyte size files, so this shouldn't be a problem on the receiving end, and it's not, as the terminal copy worked.
Why would they do that? Is there a setting I can use to override this? Google searching found some flags to use with the mount command in Linux terminal to work around this, but I'd rather just be able to use the GUI in OS X (10.5.1) - I mean, that's why we like Macs, right?

I have frequently worked with 8 to 10 gigabyte capture files in both OS9 and OS X so any limit does not seem to be in QT or in the Player. 2 GIg limits would perhaps be something left over from pre-OS 9 versions of your software, as there was a general 2 gig limit in those earlier versions of the operating system. I have also seen people refer to 2 gig limits in QT for Windows but never in OS 9 or later MacOS.

Samba share shows up only after I restart samba

I've been setting up a laptop with Arch to use at work and home. The problem is I can not see my samba share until I restart the samba service. The server is available though. I can connect with \\IPADDRESS\SHARE. It's just not listed under Network Places or smbtree.
I have samba under DAEMONS in rc.conf and I've tried starting it in rc.local too. But even if I leave it out of those and start samba manually, I have to restart samba before the share will show up on any client.
The clients are Arch, Windows, and Ubuntu and the share is not available any of them. And the problem happens when I'm at work or at home. I've been googling, but I can't find much about a share being available but not being listed.
My /etc/samba/smb.conf:
#======================= Global Settings =====================================
[global]
# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
workgroup = MYWORKGOUP
# server string is the equivalent of the NT Description field
server string = Work Files
# Security mode. Defines in which mode Samba will operate. Possible
# values are share, user, server, domain and ads. Most people will want
# user level security. See the Samba-HOWTO-Collection for details.
security = user
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
hosts allow = 192.168.0. 192.168.1. 127.
# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
load printers = yes
# you may wish to override the location of the printcap file
; printcap name = /etc/printcap
# on SystemV system setting printcap name to lpstat should allow
# you to automatically obtain a printer list from the SystemV spool
# system
; printcap name = lpstat
# It should not be necessary to specify the print system type unless
# it is non-standard. Currently supported print systems include:
# bsd, cups, sysv, plp, lprng, aix, hpux, qnx
; printing = cups
# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest
# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/%m.log
# Put a capping on the size of the log files (in Kb).
max log size = 50
# Use password server option only with security = server
# The argument list may include:
# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
# password server = *
; password server = <NT-Server-Name>
# Use the realm option only with security = ads
# Specifies the Active Directory realm the host is part of
; realm = MY_REALM
# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration.
; passdb backend = tdbsam
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting.
# Note: Consider carefully the location in the configuration file of
# this line. The included file is read at that point.
; include = /usr/local/samba/lib/smb.conf.%m
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24
# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
; local master = no
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
; os level = 33
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
; domain master = yes
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; preferred master = yes
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
; domain logons = yes
# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat
# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
; wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The default is NO.
dns proxy = no
# These scripts are used on a domain controller or stand-alone
# machine to add or delete corresponding unix accounts
; add user script = /usr/sbin/useradd %u
; add group script = /usr/sbin/groupadd %g
; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
; delete user script = /usr/sbin/userdel %u
; delete user from group script = /usr/sbin/deluser %u %g
; delete group script = /usr/sbin/groupdel %g
# Allow Symlinks (Needed this option after 3.4.6 due to security issues)
unix extensions = no
#============================ Share Definitions ==============================
;[homes]
; comment = Home Directories
; browseable = no
; writable = yes
# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /usr/local/samba/lib/netlogon
; guest ok = yes
; writable = no
; share modes = no
# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /usr/local/samba/profiles
; browseable = no
; guest ok = yes
# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
wins support = no
;[printers]
; comment = All Printers
; path = /var/spool/samba
; browseable = no
# Set public = yes to allow user 'guest account' to print
; guest ok = no
; writable = no
; printable = yes
# This one is useful for people to share files
;[tmp]
; comment = Temporary file space
; path = /tmp
; read only = no
; public = yes
# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
; comment = Public Stuff
; path = /home/samba
; public = yes
; writable = no
; printable = no
; write list = @staff
# Other examples.
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
; comment = Fred's Printer
; valid users = fred
; path = /homes/fred
; printer = freds_printer
; public = no
; writable = no
; printable = yes
# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
; comment = Fred's Service
; path = /usr/somewhere/private
; valid users = fred
; public = no
; writable = yes
; printable = no
# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %U option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
; comment = PC Directories
; path = /usr/pc/%m
; public = no
; writable = yes
# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
; path = /usr/somewhere/else/public
; public = yes
; only guest = yes
; writable = yes
; printable = no
# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
; comment = Mary's and Fred's stuff
; path = /usr/somewhere/shared
; valid users = mary fred
; public = no
; writable = yes
; printable = no
; create mask = 0765
[mike]
comment = Work Files
path = /home/MYUSER/.samba_share
valid users = MYUSER
available = yes
browsable = yes
public = yes
writable = yes
# Needed this option after 3.4.6 due to security issues
wide links = yes

I removed the . (and moved the directory to match) but I still have the same issue.
Here's the smbd.log after a rebooting and then restarting samba:
[2010/05/04 07:25:41.262266, 0] smbd/server.c:500(smbd_open_one_socket)
smbd_open_once_socket: open_socket_in: Address already in use
[2010/05/04 07:25:41.266578, 0] smbd/server.c:500(smbd_open_one_socket)
smbd_open_once_socket: open_socket_in: Address already in use
[2010/05/04 07:26:01.041577, 1] smbd/server.c:267(remove_child_pid)
Scheduled cleanup of brl and lock database after unclean shutdown
[2010/05/04 07:26:21.051370, 1] smbd/server.c:240(cleanup_timeout_fn)
Cleaning up brl and lock database after unclean shutdown
[2010/05/04 07:26:45.716653, 1] smbd/server.c:267(remove_child_pid)
Scheduled cleanup of brl and lock database after unclean shutdown
[2010/05/04 07:36:46.016675, 0] smbd/server.c:500(smbd_open_one_socket)
smbd_open_once_socket: open_socket_in: Address already in use
[2010/05/04 07:36:46.017386, 0] smbd/server.c:500(smbd_open_one_socket)
smbd_open_once_socket: open_socket_in: Address already in use
And log.nmbd:
[2010/05/04 07:25:41, 0] nmbd/nmbd.c:857(main)
nmbd version 3.5.2 started.
Copyright Andrew Tridgell and the Samba Team 1992-2010
[2010/05/04 07:26:48.718046, 0] nmbd/nmbd.c:71(terminate)
Got SIGTERM: going down...
[2010/05/04 07:27:26, 0] nmbd/nmbd.c:857(main)
nmbd version 3.5.2 started.
Copyright Andrew Tridgell and the Samba Team 1992-2010
[2010/05/04 07:27:26.544934, 0] nmbd/nmbd.c:696(open_sockets)
[2010/05/04 07:36:46, 0] nmbd/nmbd.c:857(main)
nmbd version 3.5.2 started.
Copyright Andrew Tridgell and the Samba Team 1992-2010

Elements 8 & 64-bit windows 7--editor shows a bandaid for healing brush; how do I get the circle?

Previous versions of elements would show brush sizes with a circle. Using brackets, you could see the size
increase/decrease. Elements 8 only shows a bandaid for the healing brush, no indication on photo of the brush size. Also, if I set text size to large, some tools show as 3, i.e., 3 hands, 3 bandaids, etc. Anyone else have this problem or know of a solution? I'm using a laptop with Windows 7, 64-bit. Microsoft says the program is compatible.

Elements 8 only shows a bandaid for the healing brush, no indication on photo of the brush size.
Make sure that Edit > Preferences > Displays And Cursors > Painting Cursors is set to Normal Brush Tip. If that doesn't help, try deleting the Editor's preferences:
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Delete_the_Editor’s
I set text size to large, some tools show as 3
This is a known bug in PSE on Windows 7 -- you have to change the Windows display DPI (text size) to less than 150%.

KKAO is showing ZERO value for all orders

Hello All Experts,
I am running a WIP report for Production Order via KKAO. I am getting "ZERO" values for all the orders available in system. All my orders are "Release (REL) and in "Partial Delivered (PDLV) status still I am getting ZERO values.
Please find below screen shot for reference :
Can experts guide on this why I am getting ZERO values here ? Guidance will be very helpful.
Thank you.
Regards,
Sharu.

Hello Rajnessh Sir,
Please find below screen shot :
OKG9 -
OKG3 -
I am really not sure what to check here, I am new to WIP area. Experts please guide. Is above said settings correct ?
Regards,
Sharu.

What can I do for "File size too large"?

Spent 9 hrs creating a slideshow that I saved. Closed PSE 11 and reopened and can no longer find the slideshow. When I select Find, Media type, Project, nothing appears, but there is a gray box in my grid that says "File size too large". Is this my slideshow and if so how can I recover it? I am sick as this was a large time investment for my daughter's wedding which is very soon! Please help if you can.

I don't know anything about slide shows but if a picture is too large this is just a warning message, if I click a pic with this message it does show up. Have you tried clicking the thumbnail?

Tips for file size of ipod or itune videos??

I have a 1/2 hour video that i'm trying to upload on various video sites, but they limit to 100MB-- my file in mp4 format is 359MB.. does anyone have any tips on how to reduce or compress the file to a smaller size? Some of the itunes vidoes i've downloaded before that were 1/2 hour in length, were only about 30MB in size...what the significant difference in file size?

what the significant difference in file size?
The single, most important factor is you combined (audio + video) average data rate. In your example above, the 359 MB file has a combined average data rate of roughly 1600 Kbps or about that of a standard iPod 640 width iPod file "preset" output. On the other hand, a 30 MB 30-minute file has a combined average data rate of about 133 Kbps or about that used for a 16 KB/s telephone modem and probably looks terrible and/or is so small that you can barely see any detail.
Basically, you have three options:
1) Reduce the combined data rate and suffer with the poor quality,
2) Divide you file into three 10-minute segments and encode using something like the "iPhone" preset which should produce a reasonably looking 480-width files at approximately 88 MBs/10-minute segment, or
3) Post your files to a site having increased file size limitations.

Sync center issue in Windows 7: sync conflict zeroing out remote file

Hi,
I'm using Windows 7 RTM Prof Eng x64 on my laptop, and I'm making available offline a folder on a remote share with Offline files. The remote share is hosted on a Windows Server 2003 R2 Ent Eng x86 server. The server is a domain controller, but the laptop is not joined to the domain. The remote folder is like 320 MB, mainly images, doc, pdf and xls files.
Synching is usually working, but sometimes I observe the following: I modify a file on my machine, and later Sync center reports a sync conflict, although nobody else modified the remote file. When I check the remote file, it is full with NULLS, e.g. if it is a doc file, it opens as a lot of empty pages.
I used the same setup with Windows Vista without problems, it just started to occur when I switched to Win 7.
I could not reproduce the issue, but the problem could be related to the network setting:
- it is something like: laptop ---|public network|--- server ---|private network|
- I usually access the server from the laptop on a public network with just its netbios name, i.e. \\server. But from this network it is also accessible from \\server.domain.com and \\server-public-ip The small sync icon appears near the folder name only when I view it as \\server, and not in the other two cases.
- when I connect to with WLAN, then the laptop is connected to the private network. Here the server is accessible via \\server-private-ip or \\server.domain2.local. When I open \\server only the offline folder is visible (the server is also a firewall, which blocks SMB going out to the public network).
- the clocks of the two machines are not synchronized, but the difference is below 10 seconds
I could understand a sync conflict or not detecting that the local and remote file are the same, but the zeroing out the remote file part is quite mysterious. Have anyone seen something like that?
Thanks for the help,
Zoltan

Hi,
Did you find a solution to this issue? We are experiencing the same.
We have had users reporting that they have created a word doc whilst on the network. Saved it, then logged off and taken their laptops home. Worked on the file for a few hours, with several saves, closes and reedits. Then finally saved the file, logged off.
When returning to work and logging in whilst connected to the network the file then becomes 0KB. The file appears to be unrecoverable as backups are only of the server version. There is no previous versions recorded and the last edited is the data of the
original blank file. It would appear that the server version (Older) is overwriting the Local cached version (Newer).
This is obviously causing some serious issues for staff who have lost hours of work done at home. Has anyone else experienced this.
Servers run Windows 2008 R2, Clients Windows 7 Professional. Offline Files setup by Group Policy.
Regards,
Fraser

Invoice show zero value for service po

Hi all,
I have a service po with item catoegory B and account assignment K but when i do MIRO it does not shows the value of po simply says qty zero and value zero
any suggestion
Thanks

Hi,
In your PO have flagged service based IV in invoice item details. Please post the service entry sheet in ML81N accept and saved the entry sheet.
Then, system will automatically post the goods receipt posting for the service entry sheet.
Pleas echeck it PO -History before posting the invoice,
Now post the invoice then system allow to simulate the invoice for the service PO.
With Kind Regards,
Thiru

Finder Window Flashes When Showing Preview Of Multimedia Files.

When Show Icon Preview is selected the finder window flashes(i.e, its gets highlighted and deactivated in a flashing manner) especially when previewing files of movies and pictures(PDF previewing is fine).The problem is there even in cover flow mode while loading the preview,and once the preview(thumnails) of files are done the finder behaves normal.When i checked the problem in another account it's working fine with out any problem in show icon preview mode,clover flow mode.I think the problem is a corrupted preference file.I tried deleting com.apple.finder.plist but its of no use...

You are using Perian?
--> Delete ~/Library/Preferences/org.perian.Perian.plist and re-login! May update the Perian tool and the flashing is gone.

RSA7 shows zero records for delta upload of 2LIS_03_BF Datasource

Dear Professionals,
I am having constant issues with inventory management DataSource (2LIS_03_BF). I scheduled delta upload in r3 production using LBWE, keeping in mind that in LBWE there is no options for posting dates, ETC... In RSA3, there are records, but when i check RSA7, it is showing 0 records. What could be the problem. Do i need to do anything/activation anywhere in LBWE or RSA7 to see the records. Please advise.

Hi,
Normally there should be a collective run which transfers data from the application-specific queues to the BW delta queue (RSA7), just like this workflow:
MCEX03 queue==> RMBWV03 (Collective run job) ==> RSA7-Delta queue => BW
It is necessary to schedule the job control regularly - see point 3 of SAP Note 505700.
Check also these SAP Notes:
869628     Constant WAITUPDA in SMQ1 and performance optimization
728687     Delta queued: No data in RSA7
527481     tRFC or qRFC calls are not processed
739863    Repairing data in BW
Rgds,
Colum

DivX to H.264 -- Any way to control for file size?

Hi there,
I'm converting DivX files that my digital camera uses to H.264 files. I'm using MPEG Streamclip to do this.
It's working fine, but results in much larger files. For example, a 23.4MB DivX AVI file converts to a 89.6MB H.264 MP4 file. A 91.4MB DivX AVI file converts to a 414.2MB H.264 MP4 file.
Is there any way to convert these using H.264 without sacrificing quality and without resulting in such large files? MP4 files work with Quicktime, iMovie and (under Leopard) the Finder much better than DivX files do. Any advice?
Thanks in advance,
Mike

When you are playing a DixX file have a look at the bitrates - IIRC that is a mix of video (most of it) and audio codecs. Say it says 1000 kb/sec. If you open the file in (freebie) MPEG Streamclip and export to MPEG-4 selecting the iPod setting 320X240 you will get a 700 kb/sec video and 128 kb/sec audio so around 830 kb/sec. The file will be smaller.
If you pick the Apple TV export preset it is at about 1500 kb/sec so the result will be 50% bigger.
Depending on the source codec using a lot higher H264 bitrates may not make it look better anyway (you cannot create data) , so try the basic iPod setting - benefit - reasonably small - a 45 minute TV show for me is about 270MB yet looks good on a TV set via iPod, and you will have iPod compatibility as well.
Use MPEG Streamclip 1.9b3 version.

Imported iPhoto pictures show as slightly smaller file size than they did i

I imported my iPhoto library into Aperture (just about all JPEGs). It seems like Aperture reads each file as slightly smaller than iPhoto does -- for instance, 6.7 MB in iPhoto but 6.42 in Aperture. Is this just a function of how each program reads the file, or does the quality of the file become reduced by virtue of being copied into Aperture?

Sharon,
My guess is that it is merely a difference in how the programs show you the size. 1 Kbyte is 1024 bytes, and 1 Mbyte is 1024 KBytes. Some people (even real computer scientists) want to claim that those numbers should be 1000 instead of 1024. Some people claim that a capital letter or a lower case letter changes the meaning of the abbreviation, too.
If your file is 6.42 MBytes (for real), this is 6731857 bytes. If you do the "fake" math, 6731857/1000/1000 is 6.7.
nathan

Windows samba share shows "zero KB" for file size....

Similar Messages

Maybe you are looking for