Windows SBS 2008 Deployment Report for Updates in SBS Console Is Empty

The SBS Console on my Windows SBS 2008 is able to report updates which are available for deployment, and it also is aware of the number of computers which are affected by the update in the Security>Updates summary page in the SBS console. However, if
I select an update and click "View the update deployment report," there are no computers listed.
I have gone through the steps outlined in these posts:
Repair monitoring and reporting features in Windows Small Business Server 2008
SBS2008: Windows SBS Console may crash because of incorrect Environment Variables
My variables read read TEMP=C:\user\me\appdata\local\temp\1 and TEM=C:\user\me\appdata\local\temp\1 from the command line, but in the Environment Variables window, they both read as C:\user\me\appdata\local\temp\
SBS 2008 Console May Take Too Long to Display Alerts and Security Statuses, Display Not Available, or Crash
(I was unable to run this from the command line, even though I was running the command as administrator, and had remote connections allowed. I ended up running this command in the SQL management studio.)
Repair Windows Update Services
I am sorry for the missing hyperlinks, but I am not allowed to post them until my account has been verified. Searching for the article titles in bold will take you to the referenced page. I thought it would be helpful to mention the steps I have tried to take
before taking to the forums with my problems.
Any ideas? Does this need any clarification?

I did take a look at the console. When I refresh the list under the Updates
tab in the Security ribbon, I get multiple lines of:
[11340] 140114.090516.2325: Update Services: GetConfiguration: level Medium is read from config file C:\Program Files\Windows Small Business Server\Data\sbsconfig.xml
[16772] 140114.090535.4166: Update Services: GetConfiguration: level High is read from config file C:\Program Files\Windows Small Business Server\Data\sbsconfig.xml
Then, every time I try to view the computers to which a particular update apply, the console throws these lines into the Console.log:
[8416] 140114.090659.3547: AdminTME: Committer: RunAsync TaskViewDeploymentReport
[21016] 140114.090659.3703: AdminTME: AdminDataLink Running Task: TaskViewDeploymentReport
[21016] 140114.090659.3703: AdminTME: Status: TaskId = TaskViewDeploymentReport, RootTaskId = TaskViewDeploymentReport, Success: True, Warning: False, Continue: False, Message:
[8416] 140114.090700.5420: AdminTME: Committer: Completed called
[8416] 140114.090700.5420: AdminTME: Committer: Task was cancelled.
[8416] 140114.090700.5420: AdminTME: Committer: Committer Completed.
Now that I have been verified, I can include this screenshot, where you can see that I am expecting 4 computers to be listed in the pop-up window:
Any additional thoughts? In the meantime, I will be doing some searching on the new adminTME lines.

Similar Messages

Deploying reports for a WPF application

hi,
we should create and deploy reports for a WPF application. The app is developed in VS 2013, following the MVVM pattern and using Oracle DB.
We are newbie with this matter, so we are searching the best approach to accomplish the job. Our goal would be detach reports from the deployment package and store them to a server folder, so that users can run them by editing something like:
http://myserver/myapp/reports/[reportname]
The issue we are experiencing is that reports seem to be launch from the user's computer, and need a Oracle Client installed on each client computer to load data, while the application works with no Oracle Client installed. We tried both Crystal Reports
and Report Viewer, and installed an Oracle Client on the report server; but we could not get them to work. we also tried to install ReportViewer Reporting Service, but we dont know how it works. notice that company policies forbid installing Oracle Client
in the client computers.
Can anybody give us some hint on what is the correct approach to solve our problem? thanks

Hi,
ClickOnce deployment allows you to publish Windows-based applications for simplified installation.
For how to create Report , You'd better consult following forum:
#Report Viewer
http://social.msdn.microsoft.com/Forums/en-US/home?forum=vsreportcontrols
Oracle and Crystal Reports is third party software,I recommended to consult the software provider directly, I think they can give more precise troubleshooting.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Report for update of Material with deletion Flag from R/3 to SRM

Hi All,
           Is any report for Updating material in SRM with deletion indicator for those deletion flag set in R/3...

Check material status
IF mat_mmsta EQ '--'.
    lv_msgv1 = iv_ordered_prod.
    CALL FUNCTION 'BBP_PD_MSG_ADD'
      EXPORTING
        i_msgty       = c_msgty_e
        i_msgid       = 'BBP_PD'
        i_msgno       = 426
        i_msgv1       = lv_msgv1
      EXCEPTIONS
        log_not_found = 1
        OTHERS        = 2.
    IF sy-subrc <> 0.
      PERFORM abort.
    ENDIF.
    IF c_on = c_off.
      MESSAGE e426(bbp_pd) WITH lv_msgv1.
    ENDIF.
ENDIF.
if not mat_lvorm is initial.
    lv_msgv1 = iv_ordered_prod.
    call function 'BBP_PD_MSG_ADD'
program name LBBP_PDIGPF2R
Check material in backend
CALL FUNCTION 'META_MATERIAL_READ'
    EXPORTING
      i_mtcom        = ls_mtcom_eci
      logical_system = iv_log_system
    IMPORTING
      e_mmsta        = mat_mmsta
      e_lvorm        = mat_lvorm
    EXCEPTIONS
      mat_not_found = 1
      OTHERS         = 2.
IF sy-subrc <> 0.
    lv_msgv1 = iv_ordered_prod.
    lv_msgv2 = iv_plant.
    CALL FUNCTION 'BBP_PD_MSG_ADD'
      EXPORTING
        i_msgty       = c_msgty_e
        i_msgid       = 'BBP_PD'
        i_msgno       = 275
        i_msgv1       = lv_msgv1
        i_msgv2       = lv_msgv2
      EXCEPTIONS
        log_not_found = 1
        OTHERS        = 2.
    IF sy-subrc <> 0.
      PERFORM abort.
    ENDIF.
    IF c_on = c_off.
      MESSAGE e275(bbp_pd) WITH lv_msgv1 lv_msgv2.
    ENDIF.
ENDIF.
      EXPORTING
        i_msgty       = c_msgty_e
        i_msgid       = 'BBP_PD'
        i_msgno       = 345
      EXCEPTIONS
        log_not_found = 1
        others        = 2.
    if sy-subrc <> 0.
      perform abort.
    endif.
    if c_on = c_off.
IN SRM PROGRAM LBBP_PDIGPF2R BBP_PD 345 throws message "product x is designed for deletion"
but it is validationg from fm 'META_MATERIAL_READ'
please close this thread
br
muthu

TS1717 I have older version of itunes on Windows Vista, when i check for updates it states it cannot connect to itunes update server even though i am connected to the internet, i have an iphone that has songs in the cloud and i wan to add them to my libra

I have older version of itunes on Windows Vista, when i check for updates it states it cannot connect to itunes update server even though i am connected to the internet, i have an iphone that has songs in the cloud and i want to add them to my library?

Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

Urgent!! Deploy reports for Developer suite 10g (Newbie)

Hi All,
I've generated few jsp report using report builder from developer suite 10g. I know in the developer suite 9i. I just copy these jsp files under \reports\j2ee\web. Then start OC4J Instance, and type in from browser as http://localhost:8888/reports/testreport.jsp?userid=username/password@dbconnection. However, it doesn't work for 10g. Is there any different in deploy report for 10g? Please help....
Thanks,
Best Regards,

Andy,
It's impossible to help us if you doesn't specify what error messages you get?
If I should take a guess, you're using the wrong port number. Did you check if it's correct before posting your message? Most Developer Suite 10g installations comes with port number 8889.
Regards,
Martin Malmstrom

Windows Intune Reports for update

Hi all,
Once i installed monthly patches , lets take 5 patches . Is it possible to pull out the exact report for whether those five patches got insatlled.

Nope. You can only run a report of all installed updates based on update classifications.

Windows server 2008 R2 won't update

I have a Windows Server 2008 R2 which won't install updates coming from a WSUS server. All other servers are installing updates fine. They fail with the code 52D. If i look at the Application Event log i can see the install start but then
each update fails with the following events and IDs:
Event ID: 11325
Product: Microsoft Office professional Plus 2010 -- Error 1325. 'administrator' is not a valid short file name
Event ID 1024
Product: Microsoft Office Professional Plus 2010 - Update 'Update for Microsoft InfoPath 2010 (KB2817369) 32-Bit Edition' could not be installed. Error code 1603. Windows Installer can create logs to help troubleshoot issues with installing software
packages. Use the following link for instructions on turning on logging support: http://go.microsoft.com/fwlink/?LinkId=23127
Both events have the source as MsiInstaller
Also i have an update for Adobe Reader which is an .msp file which also won't install and gives the error message:
Error 1325.administrator is not a valid short name file.
I have a feeling this has something to do with Windows Installer but i'm unsure how to fix it.
Please help
Thanks

Hi,
2014-05-14
14:30:03:921 5336   16a8
Handler         MSP Error List:
2014-05-14
14:30:03:921 5336   16a8
Handler         1: 1325 2: administrator
2014-05-14
14:30:03:921 5336   16a8
Handler
: MSI transaction completed. MSI: 0x80070643, Handler: 0x8024200b, Source: No, Reboot: 0
2014-05-14
14:30:03:921 5336   16a8
Handler
: WARNING: First failure for update {5D5C9291-182E-48CD-B1CB-B245E9BB5B0B}, transaction error = 0x8024200b, MSI result = 0x80070643, MSI action = CostFinalize
2014-05-14
14:30:03:922 1148   1878
AU      >>##
RESUMED ## AU: Installing update [UpdateId = {8AF4924E-500A-4AFF-B4DB-C64E9F0C7102}]
2014-05-14
14:30:03:922 1148   1878
AU      # WARNING: Install failed, error = 0x80070643 / 0x0000052D
2014-05-14
14:30:03:922 5336   16a8
Handler
: WARNING: Operation failed at update 0, Exit code = 0x8024200B
The log is filled with such kind of errors. And based on these message, I found some valuable information that worth a try.
What causes error 0x80070643 / 0x0000052D ?
http://social.technet.microsoft.com/Forums/windowsserver/en-US/4f64bcbe-54dc-4e66-a83c-dfc2cdc0fb7e/what-causes-error-0x80070643-0x0000052d-
Error 0x80070643 with Office 2010 Patches KB2553065 KB2584066 KB2553091
http://social.technet.microsoft.com/Forums/windowsserver/en-US/df31233e-fdd8-4c2f-b0db-6767cd4a0822/error-0x80070643-with-office-2010-patches-kb2553065-kb2584066-kb2553091?forum=winserverwsus
The two thread discussed the same error with solution in it. And the following article applied up to office 2007. But the article reviewed at September 12, 2011. Not 100 percent
sure if it applied, but you can have a try.
If you disable the Ose.exe file, Microsoft Office updates do not install when you use Microsoft Windows Server Update Services or the Microsoft Update Web site to deploy software
updates and hotfixes to computers in the organization
http://support.microsoft.com/kb/903774
Hope this helps.

I can not update a Windows Server 2008 R2 with Software Update Group in SCCM2012

Hi all,
I got some problems with update deployments these days.
I try to configure SCCM2012 to update 1 Windows Server 2008 R2 (with Hyper-V / This server is in a cluster)
Actually i've 4 other Hyper-V servers and i would like to add one more in the cluster called Hyper-V5. To do that i need that all Hyper-V servers use the same Windows Updates.
I created a collection for my Hyper-V servers and then a Software Update Group with all needed updates (checked the list of another HV-Server).
I did a deployment on this collection using this new Software Update Group.
I checked the Sofwtare Center's logs on the Hyper-V5 server and i saw that synchronization has a successfull state.
But there is no updates installed or displayed in Sofwtare Center.
Here is some screenshots : Oh no i can't post image because ... "Body text cannot contain images or links until we are able to verify your account." waiting to be verified since months.
Thanks for your help.

Hi,
Have you try to run Software Updates Scan Cycle and Software Updates Deployment Evaluation Cycle Actions on the client? Please check ScanAgent.log and PolicyAgent.log to see whether the client received the updates deployment policy.
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Unable to install the security patches KB2677070 in Windows Server 2008 R2 SP1 (The update is not applicable to your computer)

Dear everyone,
We are trying to install the below KB in our windows server 2008 R2 SP1, however, it will show "The update is not applicable to your computer". There is no problems to install the other patches except this one. Do anyone have idea about it?
http://support.microsoft.com/kb/2677070
Thanks,
Users

Hi,
According to this KB article, there are many exceptions where this KB is not applicable.
Please perform the following steps:
Expand the “For all supported…” title in the File Information section in the KB article.
Find Crypt32.dll.mui files on your machine.
Then compare the file version, file size, data and time with the ones listed in the KB article.
If there is a match, then this KB doesn’t apply to your machine, which is by design.
Hope this helps.
Best Regards,
Amy Wang

ClickOnce Programmatic deployment checks for updates if there is a failure in the middle of an update

Hi,
I am using ClickOnce deployment APIs in C#.
The application is checked not to "Check for updates". Unfortunately, due to some slow internet connectivity issues the deployments sometimes fail.
When such a scenarios happens, the next time the application is restarted it will prompt the "There was an update" dialog even though the Project ClickOnce settings are set not to check for updates.
I couldn't find any solutions or documentation. Any help would be appreciated!
This is my code:
if (IsUpdated())
nextProgress = 0;
logger.Info("Found new version! UPDATING...");
applicationDeployment.UpdateAsync();
// We use this instead of applicationDeployment.CheckForUpdate(false) because applicationDeployment.CheckForUpdate(false)
// Is limited to a few hundred calls only (Microsoft BUG: http://social.msdn.microsoft.com/Forums/en-US/winformssetup/thread/d9183f7e-f5c7-46d0-8bb4-411ad923976c)
int checkUpdateError = 0;
private DateTime _lastCheck = DateTime.MinValue;
public bool IsUpdated()
try
var customVersionUrl = System.Configuration.ConfigurationManager.AppSettings["CustomVersionUrl"];
var manifestFile = GetIfModifiedtSince(customVersionUrl != null ? customVersionUrl : TBXConfigurationManager.Settings["VersionURL"], _lastCheck);
if (manifestFile != string.Empty)
var xdoc = XDocument.Parse(manifestFile);
XNamespace nsSys = "urn:schemas-microsoft-com:asm.v1";
var version = new Version(xdoc.Descendants(nsSys + "assemblyIdentity").First().Attribute("version").Value);
_lastCheck = DateTime.Now.AddMinutes(-10);
if (version != ApplicationDeployment.CurrentDeployment.CurrentVersion)
// update application
return true;
checkUpdateError = 0;

Hi uriab,
As you said that, you have something wrong when you update the Version of application. Due to the network, I'm afraid you have missing something important for the updation version.
I suggest you uninstall the older version, then reinstall the lastest version from the server.
And also here is a MSDN article about How to Check for Application Updates Programmatically Using the ClickOnce Deployment API.
#How to: Check for Application Updates Programmatically Using the ClickOnce Deployment API
https://msdn.microsoft.com/en-us/library/ms404263.aspx
If you have any other concern regarding this issue, please feel free to let me know.
Best regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Add a Select List to a Report, for Updating a table.

I am working on Apex 3.0. I had to allow the Report could update a table. I added two checkbox to the report, and now I should add a Select List. I've tried a lot of ways but I don't know how can I pass the value selected, related to the ID of the row. I've tried with a JavaScript but I couldn't. A process should update the row on the DB when the user change the value on the select list. There is a save button that perform the process. How I could pass the ID of the row and the value to a PL/SQL process?
Many Thanks for your suggestions.
SELECT PFA.FOCUS_AREA_ID
,FOCUS_AREA_NAME,
apex_item.checkbox(1, FA.FOCUS_AREA_ID, DECODE(PFA.FOCUS_AREA_ID, null, ' ','checked="checked" ') ||
'id="chk'||rownum||'"'|| ' onclick="checking(this)" ') as Focus_AREA_CHK,
APEX_ITEM.SELECT_LIST(
*5,*
PFA.FOCUS_TYPE,
*'DIS;DIS,ENG;ENG,EXP;EXP,TGT;TGT',*
*'id="sl_'||FA.FOCUS_AREA_ID||' " ',*
*'YES',*
NULL,
*'-Select-',*
*DECODE(PFA.FOCUS_AREA_ID, null, 'disabled="disabled" ','' ) || ' --onchange="selectedElement(this)" ',*
*'NO'*
*)* "Type"
FROM PROGRAM_FOCUS_AREAS PFA,
FOCUS_AREAS FA
WHERE
FA.FOCUS_AREA_ID = PFA.FOCUS_AREA_ID(+)
AND :P151_PROGRAM_ID = PFA.VS_PROGRAM_ID(+)

**Deleted**
Edited by: user4498053 on Dec 27, 2011 11:24 AM

Get Windows Explorer when I check for Updates for IOS

I cannot "check for updates" or "restore" IOS on my ipad. I have an ipad 1 (model A1337) and when I select either option it presents me with a windows explorer view of my pc. Any ideas? I have upgraded iTunes to 10.6.3.5. I am currently on IOS 4.2.1

Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

Windows Server 2008 Standard Drivers for Intel I217LM Gigabit Network adapter

Hi everybody,
I am unable to find Network drivers for Intel® I217LM Gigabit Network adapter for Windows Server 2008 Standard (32-bit). I have found the drivers for Windows Server 2008 R2 but that being 64-bit do not work.Kindly help me in sorting out this problem as I
am stuck need to install the drivers.
Thanks in advance.
SHOAIB

Please post your question in Intel forums : https://communities.intel.com/community/tech/places
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Windows Server 2008 R2 evaluation for learning purposes.

Hi to all,
what is the less expensive (and fully legal) way to build a private lab with Windows Server 2008 R2 virtual machines to practicing me to take exams for MCSA certification ? I have already terminated the 180-days evaluation period for Windows Server 2008
R2.
Many thanks

I've downloaded and installed several different versions of Windows Server many times using the same account and information, if there were a problem with it, I'm sure Microsoft would have raised a concern with me. You can't really run a business by
tearing down and rebuilding your infrastructure every 6 months, and by installing, using, and learning from evaluation installations, I am just one more able-bodied individual with Windows skills to improve the supportability of their current and future install
base. My use of those eval products has no real commercial value to Microsoft because I wouldn't pay for it if I had to and I am not using them within a business infrastructure.
Nothing in the evaluation terms of use that I have seen says you can only install it one time, ever, in any environment, and nothing in the delivery and use of the evaluation versions has prevented me from reinstalling.
The bottom line I guess is you have to use your best judgement. I wouldn't recommend continuously reinstalling to support a real business infrastructure as a way to bypass licensing. I can't tell you 100% beyond a shadow of a doubt that Microsoft
fully approves of reinstalling an eval for your own personal development needs. I seriously doubt that Microsoft would spend the time and resources to chase you down for it, though.
And I agree with Milos - you would be better off pursuing a server 2012 certification, for which there are also evaluation versions available.
I hope this post has helped!

Windows 7 / 2008 R2 GPO for Screen timeout not working.

What a joke. Why can't I get a simple screen saver to work VIA gpo with Windows 7 / 2008 R2? What is the fix?
User Config\admin templates\control panel\Personalization---Enable Screen Saver - Enabled, Prevent Changing Screen Saver -Enabled, Password protect the the screen saver - Enabled, Screen Saver Timeout - Enabled.
Number of seconds to wait to enabled scrren saver = 600 seconds.
I have verified these settings via RSOP.msc and group policy modeling. What do I need to get this working!
HELP WITH THIS SIMPLE TASK PLEASE!!!!!!!!!!!!!!!!!!!!

Hi Dave Santel,
Please run the following command on the problematic workstation.
Gpresult /h > %temp%\gpresult.html (“%temp%”
is the path of the gpresult.html, you can set it yourself)
Please check this file gpresult.html which is used for checking the resultant of Group Policy information to see if the GPO has applied.
Regards,
Lany Zhang

Windows SBS 2008 Deployment Report for Updates in SBS Console Is Empty

Similar Messages

Maybe you are looking for