Windows SBS 2011 Essentials out of space on C Drive

Hi there!
We have a Dell server running SBS Essentials 2011, and we have recently been getting messages saying that the C Drive is full. When we purchased the server, we ensured that Dell installed loads of storage for us which is confusing.
Upon looking into it the C drive is limited to 60GB. Is there a way that we can increase this limit from 60GB to use some of the excess storage that we have spread over the D & E Drives? With 0.5GB left it keeps shouting at us! If we could enlarge the
drive to 120Gb we should be fine for another couple of years.
Thanks in advance!
Max

Thanks, I chatted with Adobe and got the programs move to the D drive. Since then, I have found the appdata/roaming/adobe file that has a ton of disk space (32 gigs) still used on the C Drive. How can I move this folder over to the D Drive as well?

Similar Messages

Cannot get Windows SBS 2011 Essentials to connect to Client Fails at Cannot connect this computer to the network. The server is not available

I am trying to connect a Windows 7x64 Pro client to a Windows Server 2011 Essentials server. The connector starts fine,then it gives this error: "Your server cannot be located. Enter your server's name or IP address to proceed"
I can ping the server just fine.
So far I have verified
- SSL certificate is the same as the server’s computer name.
- IPV6 is disabled on client
- Manaully Set DNS to 172.16.1.10 ( server Static IP)
Any help would greatly be appreciated.
https://172.16.1.10:65515/Connect
Here are my connector log files:
[03/31/2014 22:00:39 15b8] --------------------------------------------------------------------------------------------------
[03/31/2014 22:00:39 15b8] wmain: Start of Computerconnector
[03/31/2014 22:00:39 15b8] wmain: Calling Computerconnector::ShowWizard()
[03/31/2014 22:00:39 15b8] CComputerconnector::ShowWizard: Initializing common controls
[03/31/2014 22:00:39 15b8] CComputerconnector::ShowWizard: Done initializing common controls
[03/31/2014 22:00:39 15b8] Displaying the wizard
[03/31/2014 22:00:39 15b8] CComputerconnector::ConnecttingDlgProc: IDD_CONNECTING Page Initialization
[03/31/2014 22:00:39 db0] GlobalData::Initialize (172.16.1.10, 65510, C:\Users\tuttle.SGM\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\5LMTU86Q\ComputerConnector(172.16.1.10).exe, 1033)
[03/31/2014 22:00:39 db0] ExpandEnvironmentStrings return (C:\Windows\Temp\Client Deployment Files\)
[03/31/2014 22:00:39 db0] CComputerconnector::Run: Running Task: Id=1 Description=Downloads the Setup.cab file
[03/31/2014 22:00:39 db0] NetworkUtil::DownloadFile (HTTP://172.16.1.10:65510/Connect/default.aspx?Get=Setup.cab&64bit=1&LanguageId=1033, C:\Users\tuttle.SGM\AppData\Local\Temp\Setup.cab)
[03/31/2014 22:00:39 db0] NetworkUtil::DownloadFile - Create directory [C:\Users\tuttle.SGM\AppData\Local\Temp] if not exist.
[03/31/2014 22:00:39 db0] NetworkUtil::_WinInetDownloadFile (HTTP://172.16.1.10:65510/Connect/default.aspx?Get=Setup.cab&64bit=1&LanguageId=1033, C:\Users\tuttle.SGM\AppData\Local\Temp\Setup.cab)
[03/31/2014 22:00:41 db0] InternetOpenUrl (HTTP://172.16.1.10:65510/Connect/default.aspx?Get=Setup.cab&64bit=1&LanguageId=1033) returns 12029
[03/31/2014 22:00:41 db0] _WinInetDownloadFile returns 0x80072efd.
[03/31/2014 22:00:41 db0] NetworkUtil::DownloadFile(HTTP://172.16.1.10:65510/Connect/default.aspx?Get=Setup.cab&64bit=1&LanguageId=1033, C:\Users\tuttle.SGM\AppData\Local\Temp\Setup.cab) failed with hr = 0x80072efd.
[03/31/2014 22:00:41 db0] CComputerconnector::Run: Task: Id=1 Failed
[03/31/2014 22:00:41 15b8] CComputerconnector::ServerDlgProc: IDD_SERVER Page Initialization
[03/31/2014 22:00:52 103c] GlobalData::Initialize (172.16.1.10, 65510, C:\Users\tuttle.SGM\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\5LMTU86Q\ComputerConnector(172.16.1.10).exe, 1033)
[03/31/2014 22:00:52 103c] ExpandEnvironmentStrings return (C:\Windows\Temp\Client Deployment Files\)
[03/31/2014 22:00:52 103c] CComputerconnector::Run: Running Task: Id=1 Description=Downloads the Setup.cab file
[03/31/2014 22:00:52 103c] NetworkUtil::DownloadFile (HTTP://172.16.1.10:65510/Connect/default.aspx?Get=Setup.cab&64bit=1&LanguageId=1033, C:\Users\tuttle.SGM\AppData\Local\Temp\Setup.cab)
[03/31/2014 22:00:52 103c] NetworkUtil::DownloadFile - Create directory [C:\Users\tuttle.SGM\AppData\Local\Temp] if not exist.
[03/31/2014 22:00:52 103c] NetworkUtil::_WinInetDownloadFile (HTTP://172.16.1.10:65510/Connect/default.aspx?Get=Setup.cab&64bit=1&LanguageId=1033, C:\Users\tuttle.SGM\AppData\Local\Temp\Setup.cab)
[03/31/2014 22:00:54 103c] InternetOpenUrl (HTTP://172.16.1.10:65510/Connect/default.aspx?Get=Setup.cab&64bit=1&LanguageId=1033) returns 12029
[03/31/2014 22:00:54 103c] _WinInetDownloadFile returns 0x80072efd.
[03/31/2014 22:00:54 103c] NetworkUtil::DownloadFile(HTTP://172.16.1.10:65510/Connect/default.aspx?Get=Setup.cab&64bit=1&LanguageId=1033, C:\Users\tuttle.SGM\AppData\Local\Temp\Setup.cab) failed with hr = 0x80072efd.
[03/31/2014 22:00:54 103c] CComputerconnector::Run: Task: Id=1 Failed
[03/31/2014 22:00:55 15b8] wmain: End of Computerconnector: hr=0x0

Please run this script on your server, it should help to diagnose any issues with IIS.
http://gallery.technet.microsoft.com/Windows-Server-Essentials-556159c3
You will need to set your PowerShell execution policy to remotesigned.
http://technet.microsoft.com/en-us/library/ee176961.aspx
Usually this error is due to an SSL Cert not being assigned to the 'WSS Certificate Service Web Site'
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+

Step by step to disable Folder Redirection for a single user - Windows 7 and SBS 2011 Essentials

OK...I got chewed (by someone I have a lot of respect for) for pounding on an old thread, so I'm starting a new one. I've got the Windows 7 Value Pack Plugin for SBS 2011 Essentials and Folder Redirection is working for everybody. What I'm looking for is
exactly how to go into Group Policy and disable the FD for a single user. I'm not looking for quick, incomplete answers. If you don't have time to give me the 'For Dummies' version, don't bother. Sorry, but I've done all the Googling I can stand for one day
and I'm over it! (and a little grumpy)
Thanks in advance!
Wayne S. CompTIA A+ CompTIA Network+ Microsoft MCP

... I've got the Windows 7 Value Pack Plugin for SBS 2011 Essentials and Folder Redirection is working for everybody. What I'm looking for is exactly how to go into Group Policy and disable the FD for a single user. I'm not looking for quick, incomplete
answers....
Hi Wayne,
Here's what I'd do.
1) create a Security Group in your AD environment. Call it 'Folder Redirection Members' or something like that. Put all the user accounts in your AD environment who you want to have their folders continue to be redirected to the server, do not include the
one user who you wish to exclude. in other words, you're going to use a specific security group to target the Folder Redirection policy (right now, it's Domain Users, which is everyone).
2) Edit the Group Policy that the W7PP created in your AD environment. It's likely called "W7PVP Folder Redirection". Start with verification under the Settings tab, expand Folder Redirection beneath User Configuration states that
Policy Removal Behaviouris set to Restore Contents. Then proceed using the Editor, to make adjustments under the Scope tab; verify membership in Security Filtering. Remove Domain Users,
add in Folder Redirection Members (or whatever you named your group in step 1).
3) on your workstation that your user you are applying the change to disable folder redirection, Log on to the domain account while connected to your network, elevate a command prompt, and perform a 'gpupdate /force' command and then reboot your computer.
Folder redirection configuration should be removed from the system and redirected contents should be restored back to your local path. Verify with inspection of the My Documents or other folders.
Hope this helps. Keep in mind, no warranty implied or expressed in this advice.
Try not to be so darn grumpy. :-/
Jason Miller B.Comm (Hons), MCSA:Win7, MCITP, Microsoft MVP

Windows 8.1 Client Support on SBS 2011 Essentials

Does anyone know if Windows 8.1 Client PC's are supported or will be (with a forthcoming Update Roll-up) on a SBS 2011 Essentials network?
By asking that i mean full support by using the Server Dashboard to manage it and setting up Backup and redirection policies....
Thanks

Hi,
Sorry for my mistakes.
As I know, it seems there is no Microsoft articles that indicate Win8.1 Pro supported
under Dashboard management of Small Business Server 2011 Essentials. You can contact Microsoft Customer Service, I believe that you will get an accurate response there.
Microsoft Customer Service
http://support.microsoft.com/gp/contact_microsoft_customer_serv?&fr=1&wa=wsignin1.0
Hope this helps.
Best regards,
Justin Gu

Install stuck: SBS 2011 Essentials on a Virtual Box

I’m trying to do a test install of SBS 2011 Essentials on a Virtual Box virtual machine running on a Win7 64-bit machine. I put the install partition on an external
drive.
The install stops on a window that is titled Installing Windows. The screens says: “There was a problem during the installation. To restart the installation
click Restart. You can also view the installation error logs.”
When I open those installation error logs, I see no error. (It does have Info and Warning lines.)
I’m stuck there. If I could paste in the the contents of the error logs I would, but I can’t copy from the VM until there is an installed OS.
Any help appreciated.

Hello Rob,
There may still be a problem with two things.'
1) Installing it on your external hard drive. If it is a 'usb' drive, then it seems at times the software\drivers still causes some type of conflict depending on what type of system you have.
2) Your network interface card is configured set.
Going off the assumption that you have the latest virtual box software, your problem may be point number '1'
Solution that works for some: Installed the virtual machine locally. (Remember, you can still set the disk dynamically to 160 whether you have the space locally or not) Then transfered it to an external drive after everything was installed and
working.
Caveat: Shame to say, you may not have local storage large enough to hold the vm. This is why you probably bought the external drive in the first place. Hope this helps. Just find a machine that will allow you to create the vm locally first
if you can.
James

10.5.8 binding issues to Windows SBS 2011

I am running OS X 10.5.8 and am attempting to bind the AD to our Windows SBS 2011 server. I get all the way to step 5 (after clicking Bind) and then a popup appears stating that there was an "Unknown Error" -- how can I find out what the error is? There is no code referenced. The Active Directory Domain is correct and the Administrative (under Advanced Options) is also correct.

Here is the process we used.
1. Run DU and repair permissions
2. Boot from install disk and make a disk image of the volume (just in case)
3. Install the combo 10.5.8v1.1 updater
4. Reboot
5. Install the combo 10.5.8v1.1 updater again due to a permissions database issue.
6. Only now run DU and repair permissions
7. If running mail services search Apple Support Forums for solution to the org.clamav.freshclam error. Note: this shows after you install the latest security update after 10.5.8v1.1
YMMV

Windows 8.1 with Windows Server 2011 Essentials

you can do the anytime upgrade to 8.1 pro to be able to join the domain (cost $) if you want group policy, etc.
the connector should install and allow client backup. make sure your DNS is hardcoded to be the IP of the essentials server then try the http://servername/connect
Kevin

I've Googled this on two separate occasions and can't get a clear answer. Just added a new PC for a customer. The PC came with Windows 8.1 (not Pro). Their server is Windows Server 2011 Essentials. To further complicate things the server is in another office connected by VPN. I tried installing the connector software but it failed. Sorry, don't remember the details as it was a couple of weeks ago. I was able to connect to shard drives manually using the IP address. But I'd like to set it up as a member of the domain the correct way.I'll probably need to spend the $100 to upgrade them to Windows 8.1 Pro, but before I get too deep into this I'd like to know that I'm not trying something that is unsupported.I did find this thread that eventually said that it was, but no hard evidence:...
This topic first appeared in the Spiceworks Community

Windows SBS 2011 Standard - Windows Image Backup Failure VSS Erros

Hello,
I was wondering if someone could point me in the right direction regarding a SBS backup failure on 2011. It seems i'm currently getting the typical
"Volume Shadow Copy Service error: Failed resolving account spsearch with status 1376. Check connection to domain controller and VssAccessControl registry key.
Operation:
Gather writers' status
Executing Asynchronous Operation
Context:
Current State: GatherWriterStatus
Error-specific details:
Error: NetLocalGroupGetMemebers(spsearch), 0x80070560, The specified local group does not exist."
But i have gone through many different pages regard's to fix's and nothing of the sort has resolved my issue yet. I get an error in the application logs informing me:
The backup operation that started at '‎' has failed because the Volume Shadow Copy Service operation to create a shadow copy of the volumes being backed up failed with following error code '2155348129'. Please review the event details for a solution, and
then rerun the backup operation once the issue is resolved.
I have made the change in which to change the reg entry's for the spfarm and spsearch are set to "0" and added the vssregistrygroup group with entry of 1.
I have drawn up a list of VSSadmin List Writers and the system writer is showing the following.
Writer name: 'System Writer'
Writer ID: {e8132975-6f93-4464-a53e-1050253ae220}
Writer Instance ID: {b3d9ec72-b1a7-4557-b3b5-dafe1f97b8f2}
State: [5] Waiting for completion
Last Error: No Error
I can see the SQL server writer is showing Failed and Non-retryable error? i have rebooted the server twice now after making changes but nothing seems to be working? anyone with any ideas? if you need more information then please let me know! kinda getting
stuck for ideas.
Regards
Mike

Thanks for the reply Justin
I have gone through our list and i can confirm the following.
did you install any third-party backup utility
on the SBS 2011? Or just use Windows Server Backup?
Its just windows server backup, not 3rd party backup software installed on the server.
Did you mean that set Data of spfarm and spsearch to
0 via following path?
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\VSS\VssAccessControl
<Domain>\
spfarm = dword: 0x00000001(1)
<Domain>\
spsearch = dword: 0x00000001(1)
Yes this is correct the both have been set to "0" while <domain>\VSSRegistryGroup and NT Authority\NetworkService both have Dword value of "1"
Did you right click on VSSAccessControl, select “Permissions…”, then add backup account and give it Full Control? Meanwhile, please check if
Administrators group is owner of this key.
In response to this, i have Administrators as the owner of the folder, but when you mean "add backup account" which specific account are you referring to?
Did you set the Startup type as Automatic and restart the service? Any find?
Yep this service is set to Automatic but every time i try and start it, it comes up with:
the sharepoint 2010 vss writer service on local computer started and then stopped. Some services stop automatically
if they are not in use by other services or programs.
Any feedback would be great.
Thanks
Mike

Windows SBS 2011 - I can't add a new user through the SBS Console

I have recently installed SBS 2011 and this is my first install of SBS since 2003.
After the installation I went to the SBS Console to add a new user and when I select 'Add a new user account' and base it on the Standard User account i get a message saying 'Add a New User Account failed', when i view the details for this it says "The User
Account cannot be added. Ensure that the Active Directory Domain Services service is running....
I searched the web for this and found the following which was not applicable http://support.microsoft.com/kb/958890
I then resorted to adding the users via AD Users and Computers and the modifying the value in the ADSI for msSBSCreationState to 'Created' and then it appeared in the console, i then used the console to change the user role for this account to Standard User.
But when i now click on the "Edit User Account Properties" action i get a pop up message from SBS Server saying "There is no such object on the server".
Any ideas on ow to fix this broken console would be appreciated.
Thanks,
Simon

Hi, using default names i AD will help. For everyone who lost original. grr...
http://i.techrepublic.com.com/blogs/february-2011-wstips-tip1-figa.jpg?tag=content;siu-container

X220 out of space on recovery drive

I am getting an error message that I am "out of space" on the Lenovo recovery drive. What do I do? Where do I find information about the recovery drive?

http://forums.lenovo.com/t5/ThinkVantage-Technologies/Enhanced-Backup-How-to-change-defined-space-li...
Are your backups going on there? You can either delete some older backups or increase the space for backups.
You can also put backups on an external hard drive.
http://forums.lenovo.com/t5/ThinkVantage-Technologies/tkb-p/Special_Interest_Utilities%40tkb#/?sort_...Here
Here's a list of topics on R&R from the knowledge base.
Dave
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

I'm running Final Cut Express 2. How can I move entire project and application from one internal hard drive to another? Ran out of space on one drive. Thanks.

I'm running Final Cut Express 2. My video project is 95% done and I've run out of space on my 500g internal hard drive. How can I (1) move the complete FCE program and video to my unused 250g internal hard drive and operate it from there and (2) how do I then purge all the FCE info from the 500g drive without losing anything from the 250 drive?
Also, is it possible to change the aspect ratio from 4:3 to 16:9 when the project is finished? If so, how? I now know this all should have been done before I started. Thanks for the help.

1. You can't move the application. It must remain on the system drive. Move your capture scratch folder to the external FireWire drive and use the reconnect function in the project.
2. What's the media 16:9 or 4:3?

Windows 7 Professional Pack configuration on SBS 2011 Essentials for Win 7 client after recovering a faulty system drive

I had a system drive fail on a PC the other day (Seagate Barracudas seem to do this!) and have replaced it with an SSD. Sadly its capacity is less than the original system partition on the failed drive so a bare metal restore does not work. I have
therefore reinstalled Windows 7 Pro and configured the PC with the same name.
In the dashboard of the server Windows 7 Pro Pack is implemented, but it is not functioning on the client. I have re-configured it but still no joy. I cannot see a way to disable W7PP for the client without removing the Add-in and assume this is a problem
relating to using the same name for the computer. Should I remove the Add-in and reinstall or is there an alternative?
TIA
Andrew

Here it is. I have replaced the user, client, domain and server names.
Thanks for your help. I am tempted to just remove the client from the domain, change the PC name and rejoin.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
===================================
RSOP data for [DomainName]\xxxxxxxxxxxx on [PCName] : Logging Mode
OS Configuration:            Member Workstation
OS Version:                  6.1.7601
Site Name:                   Default-First-Site-Name
Roaming Profile:             N/A
Local Profile:               C:\Users\xxxxxxxxxxxx
Connected over a slow link?: No
COMPUTER SETTINGS
    CN=[PCName],CN=Computers,DC=[DomainName],DC=local
    Last time Group Policy was applied: 22/01/2015 at 09:39:11
    Group Policy was applied from:      [ServerName].[DomainName].local
    Group Policy slow link threshold:   500 kbps
    Domain Name:                        [DomainName]
    Domain Type:                        Windows 2000
    Applied Group Policy Objects
        Default Domain Policy
        W7PVP Security Templates
    The following GPOs were not applied because they were filtered out
        W7PVP Folder Redirection
            Filtering: Disabled (GPO)
        Local Group Policy
            Filtering: Not Applied (Empty)
        W7PVP Folder Redirection
            Filtering: Disabled (GPO)
    The computer is a part of the following security groups
        BUILTIN\Administrators
        Everyone
        BUILTIN\Users
        NT AUTHORITY\NETWORK
        NT AUTHORITY\Authenticated Users
        This Organization
        [PCName]$
        Domain Computers
        System Mandatory Level
USER SETTINGS
    CN=xxxxxxxxxxxx,CN=Users,DC=[DomainName],DC=local
    Last time Group Policy was applied: 22/01/2015 at 09:39:27
    Group Policy was applied from:      [ServerName].[DomainName].local
    Group Policy slow link threshold:   500 kbps
    Domain Name:                        [DomainName]
    Domain Type:                        Windows 2000
    Applied Group Policy Objects
        W7PVP Folder Redirection
        W7PVP Folder Redirection
    The following GPOs were not applied because they were filtered out
        Default Domain Policy
            Filtering: Not Applied (Empty)
        Local Group Policy
            Filtering: Not Applied (Empty)
        W7PVP Security Templates
            Filtering: Disabled (GPO)
    The user is a part of the following security groups
        Domain Users
        Everyone
        BUILTIN\Administrators
        BUILTIN\Users
        NT AUTHORITY\INTERACTIVE
        CONSOLE LOGON
        NT AUTHORITY\Authenticated Users
        This Organization
        LOCAL
        RA_AllowComputerAccess
        WSSUsers
        RA_AllowAddInAccess
        RA_AllowShareAccess
        RA_AllowRemoteAccess
        RA_AllowNetworkAlertAccess
        RA_AllowHomePageLinks
        High Mandatory Level
C:\Windows\system32>
Andrew

SBS 2011 Essentials RWA Problem

When I remote to my site: https://remote.daliahplastics.com
I get the following
Any Ideas?
Thanks Dexter

Robert
Thanks for your help. This is what I get after https://localhost
<meta content="IE=5.0000" http-equiv="X-UA-Compatible" /><title>Could not load file or assembly 'Wssg.Web.Internal, Version=6.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.</title><meta
content="text/html; charset=utf-8" http-equiv="Content-Type" /><style>body {font-family:"Verdana";font-weight:normal;font-size: .7em;color:black;} p {font-family:"Verdana";font-weight:normal;color:black;margin-top: -5px} b {font-family:"Verdana";font-weight:bold;color:black;margin-top:
-5px} H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red } H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon } pre {font-family:"Lucida Console";font-size: .9em} .marker {font-weight: bold; color: black;text-decoration:
none;} .version {color: gray;} .error {margin-bottom: 10px;} .expandable { text-decoration:underline; font-weight:bold; color:navy; cursor:hand; } </style><meta content="MSHTML 11.00.9600.16476" name="GENERATOR" />
Server Error in '/' Application.
Could not load file or assembly 'Wssg.Web.Internal, Version=6.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.FileNotFoundException: Could not load file or assembly 'Wssg.Web.Internal, Version=6.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
Source Error:
The source code that generated this unhandled exception can only be shown when compiled in debug mode. To enable this, please follow one of the below steps, then request the URL:
1. Add a "Debug=true" directive at the top of the file that generated the error. Example:
  <%@ Page Language="C#" Debug="true" %>
or:
2) Add the following section to the configuration file of your application:
<configuration>
   <system.web>
       <compilation debug="true"/>
   </system.web>
</configuration>
Note that this second technique will cause all files within a given application to be compiled in debug mode. The first technique will cause only that particular file to be compiled in debug mode.
Important: Running applications in debug mode does incur a memory/performance overhead. You should make sure that an application has debugging disabled before deploying into production scenario.
Assembly Load Trace: The following information can be helpful to determine why the assembly 'Wssg.Web.Internal, Version=6.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' could not be loaded.
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
Stack Trace:
[FileNotFoundException: Could not load file or assembly 'Wssg.Web.Internal, Version=6.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.]
Microsoft.WindowsServerSolutions.Web.RootSite._Default.InitializeCulture() +0
ASP.default_aspx.FrameworkInitialize() +42
System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +72
System.Web.UI.Page.ProcessRequest() +269
System.Web.UI.Page.ProcessRequest(HttpContext context) +167
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +625
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +270
Thanks
Dexter
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.1016

Windows Server 2012r2 Essentials - Dashboard - Server Folder and Hard Drives Not Showing..

Hi,
Following the last series of Windows updates, I'm experiencing problems with our WS2012R2 Essentials server. When opening the Dashboard, the 'home:getting started' tab shows all correct except 'server folders n/a'. On checking the Storage tab, the normal
display for 'server folders' and 'hard drives' just shows 'refreshing list of items'.
Despite symptoms above, Storage Space and Server Folders show correctly in server Windows Explorer and are available to client computers across the LAN. It just appears that for some reason the Dashboard cannot see them.
One other related symptom I've noted is that for some reason the 'wsestoragesvc' Windows Server Essentials Storage Service no longer starts automatically. Even when started manually Dashboard symptoms remain - server folders and hard drives aren't visible
on dashboard.
I've run sfc /scannow to check for problems - all clear and run chkdsk on the system volume.
Would welcome ideas on what steps to be taken to fix problem. Many thanks..

Hi,
The issue could be due to a custom service knocks on effect on the Windows Server Essentials Storage Service and causes the service no longer starts automatically.
You could refer to the thread below to troubleshoot the issue:
WHS 2011 Dashboard shows no users or drives
https://social.microsoft.com/Forums/en-US/99fe8229-091e-4130-a279-19e0b8d8a0a8/whs-2011-dashboard-shows-no-users-or-drives?forum=whs2011
If the issue still exists, try to reinstall the Windows Server Essentials.
Dashboard storage tab does not show folders or hard drives
https://social.technet.microsoft.com/Forums/en-US/d0c280cc-b0db-48d4-b649-d0db476fb4b5/dashboard-storage-tab-does-not-show-folders-or-hard-drives?foru
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Out of space on C drive

Is it better to compress music and/or video files? If not, how do I take all my itunes files and programs over to my
D drive (where there is ample space)?

I am not sure how the first question relates to the second. Unless you are trying to make your files smaller to take up less room AND stillhave them playable in iTunes?
As to your second questions, see this article on moving iTunes music folders (including to other drives)...
http://docs.info.apple.com/article.html?artnum=301748
Patrick

Windows SBS 2011 Essentials out of space on C Drive

Similar Messages

Maybe you are looking for