Windows screen of death when installing iTunes 8

I'm an XP user and have been using iTunes happily for some time. However, I encountered a problem in installing 8. Initially, I had the invalid F: error, but when I plugged in my external drive the message disappeared and the install began normally. Then I suddenly got the Windows screen of death and everything locked up. I re-booted and tried again; I removed the earlier version of iTunes; I went through regedit and failed to find any reference to an F: drive in shell folders (indicated in a previous thread) and am at a loss what to do. Can anyone help?

Use XP Installation disk with SP2 or SP3 included to fix the BSOD.
Simple your XP installation disk is outdated and cause troubles with latest hardware.

Similar Messages

  • Blue Screen of Death When opening iTunes.

    I am at a loss. For the past six months I have been trying to figure out why my computer has a blue screen of death and then restarts "nearly" everytime i open iTunes. The "nearly" is what's driving me nuts because every once in a while it will open ONCE and then start crashing again. I don't even do anything to help it open it just miraculously works every now and then. It even craches the comp when starting iTunes in safe mode. The blue screen error says "Page Fault in non-paged area". iTunes worked fine for months before this randomly started happening. I have tried every solution I have seen, even ones that weren't for my problem. So far I have:
    Manually uninstalled iTunes and QT and reinstalled the standalone QT then iTunes.
    Disabled itunes helper and ipod service before starting.
    Disabling all other services and start-up items.
    Installed current bios and drivers (as far as I can tell)
    Installed current windows installer.
    Updated microsoft products including .net
    Updated Java runtime environment
    Replaced ram
    I have a pentium 4 1.6ghz with soyo mobo and a RAID card(mirrior) set-up. 1 gig of pc133 ram. I can ul the minidump if needed.
    I figured out how to load my podcasts on my ipod manually but I want to get a video ipod so I need itunes. PLEASE HELP!!
      Windows XP  

    there's a few more things worth checking on. but let's also capture a minidump of the crash and send it to someone who can interpret minidumps.
    To set up your machine to capture a minidump, right click on "My Computer", select "Properties", select the "Advanced" tab, select the "Startup and Recovery" Settings button, select "small memory dump" from the popup. When it crashes, look for the MiniDump file. It's usually in the folder "C:\WINDOWS\Minidump" and is called something like Mini<number>-<number>.dmp.
    send it to this email address
    in the email, put the URL to this discussion thread, so that whoever gets it has some context. Also give as much information about the context of the crash (in the email) as you can.
    love, b

  • Blue screen of death when accessing Itunes store

    Whenever I click on the Itunes store, the computer crashes and I get blue screen of death.

    You haven't given your operating system.
    If you are getting a blue screen stop, it would help if you could post the exact error message. It should be some sort of numbers and text -
    0x(zeros/letters/numbers) (CAPSANDUNDERSCORES)
    For example:
    Stop 0x05 (INVALIDPROCESS_ATTACHATTEMPT)
    Also *is a file name mentioned* in the error message? If so give the exact file name
    if you're not seeing a blue screen (or just a flash of one), you can use this technique to make hidden blue screens appear:
    1) Open your system control panel (Start->Control Panels->System).
    2) Select the "Advanced" tab.
    3) Click the "Settings" button in the "Startup and Recovery" section
    4) Verify that under "System Failure" the "Automatically restart" checkbox is not checked.
    There is some general help on Troubleshooting Windows Stop Messages here:
    http://aumha.org/win5/kbestop.htm

  • Blue screen of death when installing Adobe Air

    I'm trying to install Adobe Flash CS6 and Adobe Air along with it. About 10 seconds after pressing "install", my computer shows the blue screen of death for a split second, and then restarts.
    To my knowledge, I do not have Folder Lock. I also cannot find any windrvNT.sys in the C:\WINDOWS\system32 folder, even after turning on the "show hidden files and folders" option.
    Using Windows XP

    Raymon_Zheng111 does your computer meet or exceed the system requirements for Flash CS6 listed at http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-flash-professional.h tml#Flash%20Professional%20CS6%20system%20requirements.

  • Windows Installer reports errors when installing iTunes

    I have a system with Windows XP. I only have 512MB memory. I have made numerous attempts to install iTunes. I actually had iTunes on the computer previously in conjuction with EZVinyl Converter. I was having problems with that and tried to reload iTunes. The download works fine. When I try to install, I get a message saying, "Windows Installer encountered problems  before iTunes could be configured. I do not know how to fix the problem.
    I use Comodo for my antivirus and firewall protection.

    Problem was resolved by solutions offered by B Noir. It was necessary to remove the Temp folder in Local Settings for iTunes to install correctly on my Windows XP system. Thanks for your input.

  • K9N2 SLI Platinum Blue Screen of Death when installing Windows XP

    My hardware includes:
    •   MSI K9N2 SLI Platinum Motherboard
    •   Corsair XMS2 TWIN2X4096-6400C5
    •   GeForce 9800 GT 512MB GDDR3
    •   AMD Phenom X4 9850 Quad Core Processor, Black Edition 2.5GHz
                    4MB Cache 2000MHz [4000 MT/s] FSB
    •   Thermaltake  Ruby Orb Aluminum Core CPU Cooler
    •   UltraX3 850 Watt ATX Modular Power Supply
    •   [1] Western Digital 200MB7200 ATA133 [Not connected yet]
    •   [1] Maxtor 80MB ATA133 Drive  [Not connected yet]
    •   [1] Western Digital 500GB 7200RPM 16MB SATA II HARD DRIVE
    •   [2] Seagate 7200.11 ST3500320AS 500GB SATA Hard Drives With 32 MB Cache   
                    [Not connected yet]
    •   LG DVD-RW
    •   Toshiba DVD-ROM  [Not connected yet]
    •   AMI Bios  v02.61
    •   Antec Full Tower case
    After partitioning my drive with Fdisk I tried to install Win Xp. My plan was to format the drive with XP. XP starts up and runs through the initial system check then when it prepares to install I get the blue screen that says [my words] "Windows has shut down to prevent damage to your system. If drivers are mentioned try disabling them in the BIOS or get the latest bios update from the equipment manufacturer..."  The error is:
    Stop 0x0000007E  on the next line
    pci.sys - address f7480BFbase  at  f7487000  Datestamp 3b7d855c     
    Just never had these problems setting up a system and soon I will be able to say it took me 2 years to get this running.  Hope someone can help. Thanks

    Use XP Installation disk with SP2 or SP3 included to fix the BSOD.
    Simple your XP installation disk is outdated and cause troubles with latest hardware.

  • Blue Screen of Death when installing latest patches for Windows 7

    I get a BSOD when I installed the latest windows patches.  the actual error message skips between a General protection Fault and the following:
    DRIVER_UNLOADED_WITHOUT_CANCELLING_PENDING_OPERATIONS.
    It is involving the file applemtp.sys at stop 0X000000CE
    I am unable to recover from it including a "safe mode" and a revert to previously known configuration.
    Any ideas would be greatly appreciated.

    Solution for this problem is simple. You have to apply Mac Book Air SMC Update 1.7 which you can do from Mac OS X with Software Update or you can download required update manually from Apple support site. If you don't use BootCamp and have installed Windows without it, you will have to boot Mac OS X from external drive just to apply required update. After you applied SMC update, you can boot to Windows and apply BootCamp update 3.2 and 3.3.
    There is a known problem with Mac Book Air EFI Update 2.3, which you won't be able to apply and it will show in Software Update every time you check for updates. There is no solution for it yet.
    You get BSOD if you have BootCamp 3.1 and Windows 7 SP1 installed and you have commited Windows update which will break applemtp.sys as your SMC firmware is too old. It applies to Windows 7 32 bit and 64 bit versions in BootCamp or native install.

  • Windows Installer package error when installing itunes.

    How can I reinstall Apple Software (Update) on my PC which is necessary to reinstall itunes?
    Also when I've tried to reinstall itunes I'm constantly told there is a problem with the Windows Installer.  Are there any suggestions?  Thank you for any help that you may be able to advise. 

    Let's try a standalone AppleSoftwareUpdate.msi install.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
    Go into the folder and doubleclick the AppleSoftwareUpdate.msi to do a standalone ASU install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleSoftwareUpdate.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If not, what error message do you get? (Precise text, please.)

  • When installing itunes on windows 7 i get and error, is there a way to fix this?

    I need help. the title pritty much explains it all. I run the setup and select my destination folder, then click install. down the bottem it tells what it is installing. it stops at 'installing apple software update'. it then comes up with a screen saying 'itunes insallation is done. errors acured durin installation. click finish to exit.'

    Although you're getting a different error message, perhaps try the following user tip with that one:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • When installing itunes on my windows XP I get an error message "Service Apple Mobile Device"

    When installing iTunes on my Windows XP I get an error message "Service Apple Mobile Device (Apple Mobile Device) failed to start.  Verify that you have sufficient privileges to start system services".  I don't know what this means and I do not know how to resolve it.  Can you advise please?

    Solving the iTunes Installation Problems in Windows
    1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
    2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.
    iTunes 11.1.4 for Windows- Tips for Unable to install or open

  • I get an error message when installing itunes with windows 8, error message is error occured while attempting to create the directory C:\program file(x86)\common files\apple\mobile device support\sync services\schemas\outlook.syncschema

    I keep getting an error message when installing iTunes with windows 8

    See the second box in Troubleshooting issues with iTunes for Windows updates.
    tt2

  • What to do when installing itunes to windows vista home basic an message appears saying"there is a problem with this windows installer package.A program run as part of the setup did not finish as expected.Contact your support personnel or package vendor."

    what do i do when trying to install itunes to my windows vista home basic computer and a message appears saying
    "There is a problem with this windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor."
    Need to know because this is driving me nuts now!

    Let's try the following user tip with that one:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • When installing itunes on PC with Windows Vista, the itunes program "took over" all of my desktop icons.

    When installing itunes of my PC with Windows Vista, the itunes program "took over" all of my desktop icons.  How can I install it so it doesn't do that?  Thanks!

    You can force Vista to rebuild the desktop icons by changing your monitor's color depth momentarily. In the display properties, change to 16-bit color. Then change back to 32-bit.

  • Is anybody else experiencing crashes when installing iTunes for Windows?

    Is anybody else experiencing crashes when installing iTunes for Windows?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box (similar to those given above) are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Hi, i have problem when installing itune. it said:  Could not open key HKEY_LOCAL_MACHINE32\SOFTWARE|Microsoft\Windows\CurrentVersion\Run. Verify that you have sufficient access to that key, or contact your support personnel. please help me!

    hi,
    i have problem when installing itune. it said: 
    Could not open key HKEY_LOCAL_MACHINE32\SOFTWARE|Microsoft\Windows\CurrentVersion\Run. Verify that you have sufficient access to that key, or contact your support personnel.
    Please help me i can't do anything without itune

    For "Could not open key/write value" errors when reinstalling try b noir's user tip:
    "Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\
    [LongStringOfLettersAndNumbers]" error messages when installing iTunes for Windows.
    The technique can be applied to the branch of the registry mentioned in the error message.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

Maybe you are looking for

  • Get the values using substr

    Hi All, i am a comma seperated values into a variable. below are the values. "1234567,3,124567,3,14" the length of the values can vary. eg the output can also be "123,3,124567,443,1224" I need to get each value and store it a separate variable. is it

  • F110 Payment run issue

    Hi, We have created a payment run 1a  for a range o vendors  1 - 200  scheduled the payment run, vendor no 10 was included. Then 10 mins later scheduled another payment run for vendor number 10 only the payment run was scheduled. Now the issue is for

  • UWL Zip Configuration Upload "Unable to read file"

    Hi Folks, System Info: NW AS 7.02 JAVA Stack 702 Level 16 Background: We're using the UWL for our Workflow based Approval Process in SAP FI-TV (Travel Management). For this we've been using the standard UWL configuration File com.sap.pct.erp.mss.tra

  • How to disable the open dialog when I open preview?

    Hi, I click on an PDF in the Finder. Preview launches, opens my PDF AND OPENS A OPEN-DIALOG (iCloud) ? Why? iCloud is nice, but things like that are annoying and I wish sometimes I can go back to Snow Leopard. Is there a secret workaround to fix this

  • Calander Return Monday of the Week Selected

    Hi, New to Oracle & ApEx so getting used to the development enviroment and syntax =) Anyhow my issue: I have a small calander on the side of my page and I want to return the monday of the week that the user selects on the calander, so for example if