Windows Search Service Best Pratices on RDP Server with office 2013

high everybody,
i´m looking for guide how to configure the Windows Search Service on our Server 2012 RDS Servers. The Servers have Office 2013 installed so turning off the Search Service is not an Option. We are using User Profile disks and logoff was getting slower
as time goes by. Reading in another thread if have deleted the Subkeys under
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Search\CrawlScopeManager\Windows\SystemIndex\DefaultRules
and restarted the Search Service.
This Resulted in a lighning fast logoff ( less then 5 Seconds) before that logoff took up to 2 Minutes. Looking at the Reg Key´s i found that underneth the mentioned Key there was a subkey for each user that has EVER loged on to this Server. Normal load
should be about 30 Users and i found about 700 subkey´s. To it seems that this causes the Search Service searchindexer.exe to read thru all this key´s witch i think is not the Problem ( Internet Explorer does far more reads and writes) but what happens
with the Information.
Maybe it has to to with the fact, that we are using User Profile Disks ?
In the Search Service Policy i have excluded "C:","users homedrive" and the Share where the Users share theyr data, for the Search Service to exclude.
So does anybode have experience with Seach Service on RDS Servers with Office maybe with User Profile Disks ?
Thanks Reiner

Hi Reiner,
You can check the following article might helpful to resolve your case.
Incomplete search results may occur in Outlook when a PDF iFilter is installed
http://support.microsoft.com/kb/2925203/en-us
Also try uninstalling office 2013 application and then reinstall by running change user /install command in elevated command prompt on RDS server prior to install software's. Post software installation you need to run
change user /execute command on server
http://technet.microsoft.com/en-us/library/cc742815.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

  • Windows Search Service Crashes on Windows Server 2012 R2

    Hi, 
    I'm running Windows Search service on a Windows Server 2012 R2 (24GB RAM, 8-core proc). The index catalog has a little over 2 million items (files and folders indexed). 
    Every once in a while this service crashes, and either remains in limbo or automatically recovers and restarts the index from zero. I'm trying to find out information about what may be causing the crashes and about how to prevent them. Unfortunately, I don't
    seem to be able to find much about the Windows Search service on Windows Server 2012 R2. So anyone who may have input on this, please chip in.
    Additional info:
    - As mentioned above, the server OS is Windows Server 2012 R2. This is a physical server with 24GB RAM, 8-core proc and over 2TB of storage. 
    - This server acts as a DC and as a File Server. In addition to this and Windows Search service, there are no other major services running here
    - Symantec Endpoing protection is installed and running on this server, but I've made sure to exclude the Window Search database from SEP
    Here are some of the errors that are generated when the issue happens:
    The error below may show up in the event logs. If it shows up more than once, the indexing service has likely crashed and won't recover. 
    Log Name: System 
    Source: Service Control Manager 
    Date: 1/23/2015 3:32:15 PM 
    Event ID: 7011 
    Task Category: None 
    Level: Error 
    Keywords: Classic 
    User: N/A 
    Computer: myserver.mydomain.local 
    Description: 
    A timeout (30000 milliseconds) was reached while waiting for a transaction response from the WSearch service. 
    I attempted to stop the indexing service, but it didn't stop. I noticed though that the indexing GUI started responding as soon as the
    the service stop command failed. The indexing service seems to have picked up where it was (~300K items) and continued indexing. 
    Logs sequence: 
    Log Name: Application 
    Source: ESENT 
    Date: 1/23/2015 3:57:01 PM 
    Event ID: 102 
    Task Category: General 
    Level: Information 
    Keywords: Classic 
    User: N/A 
    Computer:
    myserver.mydomain.local 
    Description: 
    SearchIndexer (18232) Windows: The database engine (6.03.9600.0000) is starting a new instance (0).
    ====
     Log Name: Application 
    Source: ESENT 
    Date: 1/23/2015 3:57:01 PM 
    Event ID: 300 
    Task Category: Logging/Recovery 
    Level: Information 
    Keywords: Classic 
    User: N/A 
    Computer:
    myserver.mydomain.local  
    Description: 
    SearchIndexer (18232) Windows: The database engine is initiating recovery steps. 
    ====
    Log Name: Application 
    Source: ESENT 
    Date: 1/23/2015 3:57:01 PM 
    Event ID: 301 
    Task Category: Logging/Recovery 
    Level: Information 
    Keywords: Classic 
    User: N/A 
    Computer:
    myserver.mydomain.local 
    Description: 
    SearchIndexer (18232) Windows: The database engine has begun replaying logfile X:\IndexingService\Search\Data\Applications\Windows\edb0053D.log. 
    ====
    Log Name: Application 
    Source: ESENT 
    Date: 1/23/2015 3:57:01 PM 
    Event ID: 301 
    Task Category: Logging/Recovery 
    Level: Information 
    Keywords: Classic 
    User: N/A 
    Computer:
    myserver.mydomain.local 
    Description: 
    SearchIndexer (18232) Windows: The database engine has begun replaying logfile X:\IndexingService\Search\Data\Applications\Windows\edb0053E.log. 
    ====
    Log Name: Application 
    Source: ESENT 
    Date: 1/23/2015 3:57:02 PM 
    Event ID: 301 
    Task Category: Logging/Recovery 
    Level: Information 
    Keywords: Classic 
    User: N/A 
    Computer:
    myserver.mydomain.local
    Description: 
    SearchIndexer (18232) Windows: The database engine has begun replaying logfile X:\IndexingService\Search\Data\Applications\Windows\edb.log. 
    ====
    Log Name: Application 
    Source: ESENT 
    Date: 1/23/2015 3:57:02 PM 
    Event ID: 302 
    Task Category: Logging/Recovery 
    Level: Information 
    Keywords: Classic 
    User: N/A 
    Computer:
    myserver.mydomain.local
    Description: 
    SearchIndexer (18232) Windows: The database engine has successfully completed recovery steps. 
    ====
    Log Name: Application 
    Source: ESENT 
    Date: 1/23/2015 3:57:02 PM 
    Event ID: 105 
    Task Category: General 
    Level: Information 
    Keywords: Classic 
    User: N/A 
    Computer:
    myserver.mydomain.local 
    Description: 
    SearchIndexer (18232) Windows: The database engine started a new instance (0). (Time=1 seconds) 
    Internal Timing Sequence: [1] 0.000, [2] 0.000, [3] 0.000, [4] 0.032, [5] 1.046, [6] 0.094, [7] 0.000, [8] 0.000, [9] 0.000, [10] 0.000.
    ====
    Log Name: Application 
    Source: ESENT 
    Date: 1/23/2015 3:57:02 PM 
    Event ID: 326 
    Task Category: General 
    Level: Information 
    Keywords: Classic 
    User: N/A 
    Computer:
    myserver.mydomain.local 
    Description: 
    SearchIndexer (18232) Windows: The database engine attached a database (1, X:\IndexingService\Search\Data\Applications\Windows\Windows.edb).
    (Time=0 seconds) 
    Internal Timing Sequence: [1] 0.000, [2] 0.000, [3] 0.016, [4] 0.000, [5] 0.000, [6] 0.000, [7] 0.000, [8] 0.000, [9] 0.000, [10] 0.000, [11]
    0.000, [12] 0.000. 
    Saved Cache: 1 0 

    Hi,
    Thanks for your post.
    To resolve this problem, use the Registry Editor to change the default timeout value for all services.
    http://social.technet.microsoft.com/wiki/contents/articles/13765.event-id-7011-service-timeout.aspx
    Please note before making changes to the registry, you should back up any valued data.
    Regards.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Windows Search Service failing to install on Windows Server 2008 R2 Terminal Server

    Hi,
    I am unable to install the Windows Search Service on a Server 2008 R2 Terminal Server. I want to install this to enable indexing options within Outlook 2013 for all users.
    Server Manager > Add Roles > File Services > Select only Windows Search Service > Install.
    The error I receive: "Attempt to configure Windows Search Service failed with error code 0x80070057. The parameter is incorrect."
    Thanks,
    Bjorn

    Hi,
    I did the test and could install the Windows Search Service without problem.
    Which role did you installed on the terminal server?
    Did you try to install it on another windows server?
    Regards.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Windows Search Service fails to start in Win8.1 Pro

    When I attempt to start the Windows Search service I am getting the following error:
    "Windows could not start the Windows Search service on Local Computer.
    Error 2: The system cannot find the file specified."
    Looking at the details of the service, it appears the file in question is C:\Windows\System32\SearchIndexer.exe with the /Embedding parameter.  When I look in the System32 folder, the file is clearly present with a date stamp of 08/22/2013 and a time
    stamp of 04:07 (I have 24 hr clock enabled in Settings).
    So I'm unsure what the problem is.
    Have attempted to run the SFC tool, no problems found.  Have disabled the service, restarted Windows then attempted to restart the service, getting the same error.
    Have attempted to restore to a previous point and still getting the same error.  Even restoring to a date same as initial installation results in the same error. Any thoughts on what I can do at this point, short of doing a fresh install?
    Thanks!

    Thank you!!! Have been looking for solution for months... even considered about reseting windows!
    This solution worked for me:
    Rename:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Search\FileChangeClientConfigs
    to
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Search\FileChangeClientConfigsBAK

  • Window search service not running

    window search service not running how i can fix it?
    This question was solved.
    View Solution.

    Hi,
    From the Desktop, hold down the Windows key and press

  • SBS2008: Move email from Exchange 2007 to new server with Exchange 2013

    We have an old server (SBS2008) and plan to buy a new server with (Server 2012). I need to move all the exchange emails, contacts & calendars to the new server. We will no longer use the old server. 
    Is there a document or migration tool that will help me understand how to move this data form the old exchange server to the new one? 
    Old Server:
    SBS2008 running Exchange 2007
    New Server:
    Server 2012
    Exchange 2013
    Any help is appreciated!

    Hi Dave,
    It can be done, and as Larry suggested you will consider two Server 2012 installs in order to achieve an environment that looks like your current SBS roles; Exchange 2013 on an Active Directory controller isn't a good long-term solution (SBS did this for
    you in the past).
    For your size operation, a virtual server host, with a Windows Server 2012 license, and two virtual machines would probably be a suitable design model.  In this manner, you have Server 2012 license that permits 1 +2 licenses (one host for virtualization,
    up to 2 Virtual Machines on same host).
    There's no migration tool. That comes with experience and usually trial and error. You earn the skills in this migration path, and for the average SBS support person you should plan on spending 3x (or more) your efforts estimate in hours planning your migration. 
    You can find a recommended migration path at this link to give you an idea of the steps, but its not exactly point by point going to cover you off for an sbs2008 to server 2012 w/exchange 2013 migration.  But the high points are in here. If it looks
    like something you would be comfortable with then you should research more.
    http://blogs.technet.com/b/infratalks/archive/2012/09/07/transition-from-small-business-server-to-standard-windows-server.aspx
    Specific around integrating Exchange 2013 into an Exchange 2007 environment, guidance for that can be found here:
    http://technet.microsoft.com/en-us/library/jj898582(v=exchg.150).aspx
    If that looks like something beyond your comfort level, then you might consider building a new 2012 server with Exchange 2013 environment out as new, manually export your exchange 2007 mailbox contents (to PST) and then import them into the new mail server,
    and migrate your workstations out of old domain into new domain.  Whether this is more or less work at your workstation count is dependent upon a lot of variables.
    If you have more questions about the process, update the thread and we'll try to assist.
    Hopefully this info answered your original question.
    Cheers,
    -Jason
    Jason Miller B.Comm (Hons), MCSA, MCITP, Microsoft MVP

  • How to Use Team Foundation Server With SharePoint 2013 For Development

    Hi All,
    As i am new to team foundation server and i want to use team foundation server for our development. Please give me good startup point.

    Hi,
    If you wanted to integrate Team Foundation Server with SharePoint 2013,
    there are two articles for your reference:
    http://dumians.wordpress.com/2013/04/01/integrate-team-foundation-server-with-sharepoint-2013/
    http://nakedalm.com/integrate-sharepoint-2013-with-team-foundation-server-2013/
    By the way, you can also post the question in in Visual Studio Team Foundation Server forums and more experts will assist you.
    Team Foundation Server – General  http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=tfsgeneral
    More information:
    SharePoint Products requirements for Team Foundation Server:
    http://msdn.microsoft.com/en-us/library/hh667648.aspx
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • Server based Office 2013 - New template, template not showing header content in one work station only

    This is for Server based Office 2013 - using Word 
    All computer work stations are running Windows 7 professional
    I have Word 97 - 2003 templates saved on the shared drive on the server. I have these templates "pinned" to the opening page on all server user accounts, so when anyone starts word on the server anyone can see the company templates.
    On most of the work stations, when I create a new document from one of my templates - Word successfully shows all the Header and Footer details. 
    But on one work station there is no content in the Header or Footer, no matter which server account is signed into the server on that workstation.
    Any suggestion 

    ... ... no matter which server account is signed into the server on that workstation.
    Any suggestion 
    Do you mean it happens regardless of which acount signed in? If so, maybe update the workstation?

  • Have tried to install icloud 4.0 for windows and again it does not allow syncing with outlook 2013 calendar and contact using windows 8.1 and IOS 8.02 (unexpected error)? I thought itunes 12.0 and icloud 4.0 would solve issue but still same result.

    I have tried to install icloud 4.0 for windows and again is does not allow syncing with outlook 2013 calendar and contact, using windows 8.1 and IOS 8.02 (get - unexpected error)?

    Having same issues. had been syncing every few days with outlook 2007 contacts and calendar but since updated to 4.0.2 and latest itunes I get an error that it is unable to sync. I can't seem to find any solution.

  • 2008R2 - Installation Failed - adding Windows Search Service to File Services role

    When installing the Search Service role service, Server Manager reports a failure and wants to reboot for a rollback.  In the log I see this:
    2096: 2015-03-11 11:24:12.755 [CbsUIHandler]              Error: -2147021879 : 
    2096: 2015-03-11 11:24:12.755 [CbsUIHandler]              Terminate: 
    and
    2096: 2015-03-11 11:24:12.865 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 107
    2096: 2015-03-11 11:24:12.865 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot is required to roll
    back changes made
    2096: 2015-03-11 11:24:12.865 [InstallationProgressPage]  Sync operation completed
    2096: 2015-03-11 11:24:12.880 [InstallationProgressPage]  Performing post install/uninstall discovery...
    2096: 2015-03-11 11:24:12.880 [Provider]                  C:\Windows\system32\ServerManager\Cache\CbsUpdateState.bin does not exist.
    2096: 2015-03-11 11:24:12.880 [CBS]                       IsCacheStillGood: False.
    2096: 2015-03-11 11:24:17.030 [CBS]                       >>>GetUpdateInfo--------------------------------------------------
    2096: 2015-03-11 11:24:22.630 [CBS] Error (Id=0) Function: 'ReadUpdateInfo()->Package_EnumerateUpdates' failed: 80070bc9 (-2147021879)
    2096: 2015-03-11 11:24:22.630 [CBS]                       <<<GetUpdateInfo--------------------------------------------------
    2096: 2015-03-11 11:24:22.755 [DISCOVERY]                 hr: -2147021879 -> reboot required.
    2096: 2015-03-11 11:24:22.786 [InstallationProgressPage]  About to load finish page...
    2096: 2015-03-11 11:24:22.802 [InstallationFinishPage]    Loading finish page
    2096: 2015-03-11 11:24:22.802 [InstallationFinishPage]    Finish page loaded
    sfc /scannow found nothing.  Any ideas?

    Hi,
    As other mentioned, did you have installed any the 3rd party Antivirus software in these Windows server 2008 R2 ?
    If yes,uninstall the Antivirus from the box and try again.
    Please check the firewall service is start or not.
    Regards.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • No access with SP Designer 2010 after change to FBA and Windows at the same time - Does this work with SP 2013

    Hi All,
         It seems you can't use SharePoint Designer 2010 to open a site if you have both forms and Windows Auth selected.
    Is there any way around this if i want to use the 2 at the same time?
    How does this work with SharePoint 2013 as i would be doing some migrations?
    Cheers in Advance

    Hi,
    As I understand, you encountered the issue after you selected both FBA and Windows Authentication at the same time.
    As I test, I can open the SharePoint 2010 site using FBA and Windows Authentication by SharePoint designer 2010. When you open the site first,
    you will get a dropdown menu where you can choose between the 2 authentication mechanisms.
    After you choose one of them, you can open the site.
    https://onedrive.live.com/redir?resid=40B702A9FB117DD!136&authkey=!ABtMg5n3OtPakCg&v=3&ithint=photo%2cPNG
    When I open the SharePoint 2013 site using FBA and Windows Authentication by SharePoint designer 2013, I also get
    a dropdown menu where I can choose between the 2 authentication mechanisms. I can open the site after I choose one of them.
    So I think there are some other reasons to cause the issue.  
    Check these things below:
    1. Check if you have the permission to open the site in SharePoint designer (Site Permission > Permission Level in ribbon > Click the permission you belongs to > Ensure Use Remote Interfaces is selected).
    2. Check if you have enabled the SharePoint designer to open the SharePoint site. (Select the web application hosting the site collection using the FBA and windows authentication >Central Administration website > General Application
    Settings > SharePoint Designer > ensure Enable SharePoint Designer
     is selected).
    3. Is there any error when you open the site in SharePoint Designer? If there are any errors, could you please provide it here for further research?
    More references:
    https://social.technet.microsoft.com/Forums/sharepoint/en-US/2a3c022c-f924-4b38-be02-5c5ac7a2927e/cannot-open-sharepoint-site-using-sharepoint-designer-2010-get-a-popup-with-4-possible-causes?forum=sharepointgeneralprevious
    https://social.msdn.microsoft.com/Forums/office/en-US/19628c53-fde2-44b0-806c-64f67263c931/cant-open-sharepoint-site-with-sharepoint-designer-2010?forum=sharepointcustomizationprevious
    Best regards
    Sara Fan
    TechNet Community Support

  • Cannot install PIA on Windows 8.1 64-bit with Office 2013 64-bit

    I am building a clean machine after a hard drive failure.  Everything is finally reinstalled WITH THE EXCEPTION of the Office Interop for Office 2010.  I have a clean install of Windows 8.1 which also has Office 2013 installed.
    The documentation for the 2010 library is that it only requires the framework 2.0 present (which is) so it should install.  However when I run the installation program is throws up the window "determining requirements" runs for a few seconds
    then disappears.  
    All I need is to get these things showing up in the GAC so I can get a clean build.  But try as I might I don't have them showing up at all.  Any help would be greatly appreciated!!!
    ADDITIONAL INFO:
      When I run the MSI file it brings up the window that says it is gathering information.
       This run for about 1 second (if that) moves the progress bar about halfway across, then stops and closes down the installation.
      We also installed Office 2010 and reran the PIA with the same results.  *sigh*

    Why do you need to install Office 2010 PIAs? 
    Consider embedding interop types into the assembly without using PIAs on the end user PCs.
    Beginning with the .NET Framework 4, the common language runtime supports embedding type information for COM types directly into managed assemblies, instead of requiring the managed assemblies to obtain type information for COM types from interop assemblies.
    Because the embedded type information includes only the types and members that are actually used by a managed assembly, two managed assemblies might have very different views of the same COM type. Each managed assembly has a different Type object
    to represent its view of the COM type. The common language runtime supports type equivalence between these different views for interfaces, structures, enumerations, and delegates. See Type
    Equivalence and Embedded Interop Types for more information. 
    You just need  to set the Embed
    Interop Types property to True.

  • Open Sharepoint services 3.0 documents with office 2013

    Hi
    we are using SharePoint services 3.0 with document libraries.
    we have lookup fields on the library meta data.
    problem started when upgraded users office to 2013 the document information panel is not
    loading, the error they get is "the document information panel was unable to load".
    office standard 2010 works fine
    office 2013 pro plus works fine
    office standard 2013 get this error 

    Hi,
    Please check if this applies:
    http://blogs.msdn.com/b/tehnoonr/archive/2012/05/17/sharepoint-2010-document-information-panel-fails-to-load-when-office-documents-are-opened-in-a-library-that-contains-lookup-columns.aspx
    This problem is caused if your list contains lookup columns that were created programmatically or using custom features.
    You may also have a look at this:
    http://joranmarkx.wordpress.com/tag/document-information-panel/
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice.
    Microsoft does not guarantee the accuracy of this information.
    Regards,
    Steve Fan
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • Printer driver hangs when printing with Office 2013/Windows 8 64 bit

    Printer: HP Color LaserJet CM1312nfi
    Printer Driver: V5.1 (up to date, downloaded from HP support website) or Generic V5.6
    OS: Windows 8 Professional 64bit
    When I try to print a certain Excel document with Excel 2013 and printer driver V5.1, the program hangs and needs to be terminated via task manager. This happens always with the same document, but not with all documents. The program hangs also when opening the print preview for the same document.
    The same document prints fine with the generic printer driver V5.6 and with the driver that comes with Windows 8.
    The same document prints fine with driver V5.1 under Windows 7 and Office 2010. The combination Windows 7/Office 2013 was not tested. The combination Windows 8/Office 2010 was also not tested.
    When I try to print an empty document with Word 2013 and generic printer driver V5.6, the program hangs and needs to be terminated via task manager.
    My conclusion is that the HP printer drivers have a problem with either Windows 8 or Office 2013 or a combination of both.
    The printer driver that comes with Windows 8 and is automatically installed is useful as a temporary workaround, but it lacks certain options, e.g. manual duplex.
    On request, I am ready to send the Excel document by e-mail for verification of the problem.
    Any help or suggestions will be very much appreciated.
    Thanks in advance,
    Uli
    This question was solved.
    View Solution.

    From what you describe you are having issues printing from MS Office. Have you had trouble printing from other resources on your computer (e.g. from the internet or another program)? The first thing I am going to suggest is that we start by uninstalling and reinstalling the printer from the resources available online. 
    First if you use a USB cord, make sure to remove it (this is important). Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer. 
    In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it. 
    http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3562006&lang=en&cc=us...
    Install that and let me know the result! 
    Have a great day!

  • Serialized install of Presenter 10 32-bit on Windows 7 64-bit with Office 2013 32-bit fails

    I used Creative Cloud Packager to create a serialized install of Presenter 10 32-bit for use on Windows 7 64-bit that have Office 2013 32-bit installed. The package created fine, but when I run the setup.exe that CPP generated, the progress bar moves along then undoes the changes and finishes. The Presenter didn't actually install and I get no messages about why it has failed.
    Is there any way I can determine what is causing the failure?
    I have manually run the full installer and it does work as it should. The problem is only when I create the serialized installation with the CCP.

    Hi There,
    If you have Office 32 bit, and OS 64 bit then you need to add Presenter 32 bit media as "Offline Media" . 
    Please find the below steps to create a package for Pn 32 bit and OS 64 bit :
    Launch CCP.
    Click on Create package and click Next.
    Give the name of the package , location to save it , License type as "Serial Number License" , Select "32- bit Package if your OS is 32 bit or select 64- bit Package if you OS is 64 bit" .
    Click Next and Enter the serial Key for Presenter 10. Click Next.
    Click "Offline Media" .
    Click on Browse .
    Browse to Presenter 10 Installer and select "PresenterWin32" and click Ok.
    Click on Extract.
    Select Presenter 10 and click Done.
    Click on Build .
    Regards,
    Mayank

Maybe you are looking for