Windows Search Service failing to install on Windows Server 2008 R2 Terminal Server
Hi,
I am unable to install the Windows Search Service on a Server 2008 R2 Terminal Server. I want to install this to enable indexing options within Outlook 2013 for all users.
Server Manager > Add Roles > File Services > Select only Windows Search Service > Install.
The error I receive: "Attempt to configure Windows Search Service failed with error code 0x80070057. The parameter is incorrect."
Thanks,
Bjorn
Hi,
I did the test and could install the Windows Search Service without problem.
Which role did you installed on the terminal server?
Did you try to install it on another windows server?
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Similar Messages
-
Windows Search Service fails to start in Win8.1 Pro
When I attempt to start the Windows Search service I am getting the following error:
"Windows could not start the Windows Search service on Local Computer.
Error 2: The system cannot find the file specified."
Looking at the details of the service, it appears the file in question is C:\Windows\System32\SearchIndexer.exe with the /Embedding parameter. When I look in the System32 folder, the file is clearly present with a date stamp of 08/22/2013 and a time
stamp of 04:07 (I have 24 hr clock enabled in Settings).
So I'm unsure what the problem is.
Have attempted to run the SFC tool, no problems found. Have disabled the service, restarted Windows then attempted to restart the service, getting the same error.
Have attempted to restore to a previous point and still getting the same error. Even restoring to a date same as initial installation results in the same error. Any thoughts on what I can do at this point, short of doing a fresh install?
Thanks!Thank you!!! Have been looking for solution for months... even considered about reseting windows!
This solution worked for me:
Rename:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Search\FileChangeClientConfigs
to
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Search\FileChangeClientConfigsBAK -
Windows Server 2008 R2 Terminal Server and Outlook 2013 Profile
Really hoping someone can offer some advice on this one as I have wasted far to many cycles trying to figure this out.
Company I work for recent purchased another company and we are in the process of bringing them into our network. They currently run a a 2008 R2 terminal server where all users connect to for there day to day work. A number of applications
are installed including Office 2013.
All users have Outlook 2013 configured to access their exchange server for email and this works fine.
The first step in bringing them into our fold is to add an email account for Our Exchange server without removing their existing exchange configuration or Outlook Profile. So the one profile will have both exchange accounts listed and they can
continue to get email from their server but as well email from our domain.
I created a MSP file and tested pushing this out using PDQ Deploy to a few workstations here in our office and it works fine. I then started to work on deploying in their environment. PDQ Deploy will not work as they are all terminal Services
Clients. So I tried to push out via GPO. I created the GPO Initially wanting to use a package and apply that GPO to an AD group. However it will not let me deploy a MST as a package. So I then tried moving it to a script that would
run at logon. That too is not working.
I know I could enter install mode then run the MSIEXEC.EXE \config.MSP but that takes away the ability to control the role out.
Any other ideas on how to get this done.Hi,
Your issue seems to be out of the scope of this forum. We only focus on issue about RDS/VDI deployment, management and operations. For Oultook related issue you can ask to our MS Office Forum:
https://social.technet.microsoft.com/Forums/office/en-US/home?category=officeitpro
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Installation issue : sql server 2008 r2 some services failed to installed on windows 7
I have been facing this problem while installing sql server 2008 r2.. i tried so many times but same result .. it shows sql server installed with some errors
database engine service : failed
SQL Server Replication : failed
Full-Text Search : failed
Analysis Services : failed
Reporting Services : failed
And my Log file (or) summary file is (it is in C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log):
Overall summary:
Final result: User cancelled
Exit code (Decimal): -2068380094
Exit facility code: 1207
Exit error code: 1602
Exit message: User has cancelled.
Start time: 2014-08-14 21:15:26
End time: 2014-08-14 21:23:58
Requested action: AddNode
Machine Properties:
Machine name: MANJU-PC
Machine processor count: 4
OS version: Windows Vista
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER Database Engine Services
1033 10.0.1600.22
No
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER SQL Server Replication
1033 10.0.1600.22
No
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER Full-Text Search
1033 10.0.1600.22
No
Sql Server 2008 MSSQLSERVER MSAS10.MSSQLSERVER Analysis Services
1033 10.0.1600.22
No
Sql Server 2008 MSSQLSERVER MSRS10.MSSQLSERVER Reporting Services
1033 10.0.1600.22
No
Sql Server 2008
Management Tools - Basic 1033 Developer Edition
10.0.1600.22 No
Sql Server 2008
Management Tools - Complete 1033 Developer Edition 10.0.1600.22
No
Sql Server 2008
Client Tools Connectivity 1033 Developer Edition 10.0.1600.22
No
Sql Server 2008
Client Tools Backwards Compatibility 1033 Developer Edition 10.0.1600.22 No
Sql Server 2008
Client Tools SDK 1033
Developer Edition 10.0.1600.22 No
Sql Server 2008
Integration Services 1033 Developer Edition
10.0.1600.22 No
Package properties:
Description: SQL Server Database Services 2008
SQLProductFamilyCode: {628F8F38-600E-493D-9946-F4178F20A8A9}
ProductName: SQL2008
Type: RTM
Version: 10
SPLevel: 0
Installation location: D:\Softwares\JAVA & .NET SW\SQL Server 2008\SQL Server 2008\x86\setup\
Installation edition: DEVELOPER
User Input Settings:
ACTION: AddNode
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: *****
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
CONFIGURATIONFILE:
FAILOVERCLUSTERGROUP:
FAILOVERCLUSTERNETWORKNAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTANCENAME: <empty>
MEDIASOURCE: D:\Softwares\JAVA & .NET SW\SQL Server 2008\SQL Server 2008\
PID: *****
QUIET: False
QUIETSIMPLE: False
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: *****
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140814_210558\ConfigurationFile.ini
Detailed results:
Feature: Integration Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Connectivity
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools SDK
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Backwards Compatibility
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Business Intelligence Development Studio
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140814_210558\SystemConfigurationCheck_Report.htm
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Chainer.Infrastructure.CancelException
Message:
User has cancelled.
Stack:
at Microsoft.SqlServer.Configuration.UIExtension.Request.Wait()
at Microsoft.SqlServer.Configuration.UIExtension.UserInterfaceProxy.SubmitAndWait(Request request)
at Microsoft.SqlServer.Configuration.UIExtension.UserInterfaceProxy.NavigateToWaypoint(String moniker)
at Microsoft.SqlServer.Configuration.UIExtension.UserInterfaceService.Waypoint(String moniker)
at Microsoft.SqlServer.Configuration.UIExtension.WaypointAction.ExecuteAction(String actionId)
at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)Requested action: AddNode
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER Database Engine Services
1033 10.0.1600.22
No
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER SQL Server Replication
1033 10.0.1600.22
No
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER Full-Text Search
1033 10.0.1600.22
No
Sql Server 2008 MSSQLSERVER MSAS10.MSSQLSERVER Analysis Services
1033 10.0.1600.22
No
Sql Server 2008 MSSQLSERVER MSRS10.MSSQLSERVER Reporting Services
1033 10.0.1600.22
No
Sql Server 2008
Management Tools - Basic 1033 Developer Edition
10.0.1600.22 No
Sql Server 2008
Management Tools - Complete 1033 Developer Edition 10.0.1600.22
No
Sql Server 2008
Client Tools Connectivity 1033 Developer Edition 10.0.1600.22
No
Sql Server 2008
Client Tools Backwards Compatibility 1033 Developer Edition 10.0.1600.22 No
Sql Server 2008
Client Tools SDK 1033
Developer Edition 10.0.1600.22 No
Sql Server 2008
Integration Services 1033 Developer Edition
10.0.1600.22 No
Instead of installing SQL server instance you selected add node which is to be selected when SQL server installation is to be made on Node which is being added to cluster. Since your OS is not clustered I am sure you selected worng option.
Please right click on setup file and select run as administrator. Now installation window which pops up on that on left hand side select
installation and then on page that appears select 'New server standalone installation or add feature to existing installation'.
You already have SQL server 2008 installed on your machine as per feature discovery report
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
Sometime last week Instant Search stopped working on a Terminal Server we have deployed. I don't use Outlook on the server so I didn't notice it myself but users started complaining several days ago. When I checked instant search settings everything was
grayed out. I noticed that the feature for Windows Search was disabled so I enabled that feature rebooted the server and now instant search is looking for email in archive folders and sharepoint lists. Local Mailbox mail however is not being indexed by instant
search. When I check data files it says that there is no file for the local mailbox. I checked and Cached Exchange Mode is disabled so no OST is being created and apparently there is no PST for it either.
Do I need an OST/PST to search the local mailbox?
Also I have added the Office GPO Templates and enabled the GPO for allowing Cached Exchange Mode but that doesn't seem to be helping either. Please help.Have you had any luck with this?
One of our clients has reported that 5 different users, when RDP'd into 3 different RDS Servers, cannot use the Instant Search.
I haven't been able to find anything about this in my online searches.
Like you, the mailboxes aren't even appearing under Instant Search > Search Options. Also, it would appear that there are no locally-hosted .ost/.pst's for any of the users on this server; can the instant search function work on a .pst that's saved
somewhere else on the network? -
Windows 10 Preview fails to install on Windows 8.1 64-bit Azure VM...
Hello,
I have created a Windows 8.1 64-bit on an Azure VM and downloaded the Preview ISO. I created an E: drive and copied the ISO over to the E: drive. From there I ran the setup.exe. The setup runs just fine until it comes to a restart. There the VM restarts
and the RDP connection is lost. I stop the VM, wait for an hour or so, restart the VM, and reconnect through RDP. When logging in the Preview returns an error message stating the Preview could be installed - there's a cryptic hex code. Then
the 8.1 OS is reloaded.
Is there a procedure I can follow to get the Windows 10 Preview running on a Azure VM. I've tried a number of times to no avail.
Any help would be appreciated...
Thanks!
ThomasHi,
This particular question pertain to Windows 10 Preview. Please post your question on this link
http://answers.microsoft.com/en-us/windows/forum/windows_tp?auth=1.
So that experts will be able to help you better.
Regards,
Bharath -
Windows Search Service Crashes on Windows Server 2012 R2
Hi,
I'm running Windows Search service on a Windows Server 2012 R2 (24GB RAM, 8-core proc). The index catalog has a little over 2 million items (files and folders indexed).
Every once in a while this service crashes, and either remains in limbo or automatically recovers and restarts the index from zero. I'm trying to find out information about what may be causing the crashes and about how to prevent them. Unfortunately, I don't
seem to be able to find much about the Windows Search service on Windows Server 2012 R2. So anyone who may have input on this, please chip in.
Additional info:
- As mentioned above, the server OS is Windows Server 2012 R2. This is a physical server with 24GB RAM, 8-core proc and over 2TB of storage.
- This server acts as a DC and as a File Server. In addition to this and Windows Search service, there are no other major services running here
- Symantec Endpoing protection is installed and running on this server, but I've made sure to exclude the Window Search database from SEP
Here are some of the errors that are generated when the issue happens:
The error below may show up in the event logs. If it shows up more than once, the indexing service has likely crashed and won't recover.
Log Name: System
Source: Service Control Manager
Date: 1/23/2015 3:32:15 PM
Event ID: 7011
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: myserver.mydomain.local
Description:
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the WSearch service.
I attempted to stop the indexing service, but it didn't stop. I noticed though that the indexing GUI started responding as soon as the
the service stop command failed. The indexing service seems to have picked up where it was (~300K items) and continued indexing.
Logs sequence:
Log Name: Application
Source: ESENT
Date: 1/23/2015 3:57:01 PM
Event ID: 102
Task Category: General
Level: Information
Keywords: Classic
User: N/A
Computer:
myserver.mydomain.local
Description:
SearchIndexer (18232) Windows: The database engine (6.03.9600.0000) is starting a new instance (0).
====
Log Name: Application
Source: ESENT
Date: 1/23/2015 3:57:01 PM
Event ID: 300
Task Category: Logging/Recovery
Level: Information
Keywords: Classic
User: N/A
Computer:
myserver.mydomain.local
Description:
SearchIndexer (18232) Windows: The database engine is initiating recovery steps.
====
Log Name: Application
Source: ESENT
Date: 1/23/2015 3:57:01 PM
Event ID: 301
Task Category: Logging/Recovery
Level: Information
Keywords: Classic
User: N/A
Computer:
myserver.mydomain.local
Description:
SearchIndexer (18232) Windows: The database engine has begun replaying logfile X:\IndexingService\Search\Data\Applications\Windows\edb0053D.log.
====
Log Name: Application
Source: ESENT
Date: 1/23/2015 3:57:01 PM
Event ID: 301
Task Category: Logging/Recovery
Level: Information
Keywords: Classic
User: N/A
Computer:
myserver.mydomain.local
Description:
SearchIndexer (18232) Windows: The database engine has begun replaying logfile X:\IndexingService\Search\Data\Applications\Windows\edb0053E.log.
====
Log Name: Application
Source: ESENT
Date: 1/23/2015 3:57:02 PM
Event ID: 301
Task Category: Logging/Recovery
Level: Information
Keywords: Classic
User: N/A
Computer:
myserver.mydomain.local
Description:
SearchIndexer (18232) Windows: The database engine has begun replaying logfile X:\IndexingService\Search\Data\Applications\Windows\edb.log.
====
Log Name: Application
Source: ESENT
Date: 1/23/2015 3:57:02 PM
Event ID: 302
Task Category: Logging/Recovery
Level: Information
Keywords: Classic
User: N/A
Computer:
myserver.mydomain.local
Description:
SearchIndexer (18232) Windows: The database engine has successfully completed recovery steps.
====
Log Name: Application
Source: ESENT
Date: 1/23/2015 3:57:02 PM
Event ID: 105
Task Category: General
Level: Information
Keywords: Classic
User: N/A
Computer:
myserver.mydomain.local
Description:
SearchIndexer (18232) Windows: The database engine started a new instance (0). (Time=1 seconds)
Internal Timing Sequence: [1] 0.000, [2] 0.000, [3] 0.000, [4] 0.032, [5] 1.046, [6] 0.094, [7] 0.000, [8] 0.000, [9] 0.000, [10] 0.000.
====
Log Name: Application
Source: ESENT
Date: 1/23/2015 3:57:02 PM
Event ID: 326
Task Category: General
Level: Information
Keywords: Classic
User: N/A
Computer:
myserver.mydomain.local
Description:
SearchIndexer (18232) Windows: The database engine attached a database (1, X:\IndexingService\Search\Data\Applications\Windows\Windows.edb).
(Time=0 seconds)
Internal Timing Sequence: [1] 0.000, [2] 0.000, [3] 0.016, [4] 0.000, [5] 0.000, [6] 0.000, [7] 0.000, [8] 0.000, [9] 0.000, [10] 0.000, [11]
0.000, [12] 0.000.
Saved Cache: 1 0Hi,
Thanks for your post.
To resolve this problem, use the Registry Editor to change the default timeout value for all services.
http://social.technet.microsoft.com/wiki/contents/articles/13765.event-id-7011-service-timeout.aspx
Please note before making changes to the registry, you should back up any valued data.
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Windows Search Service Best Pratices on RDP Server with office 2013
high everybody,
i´m looking for guide how to configure the Windows Search Service on our Server 2012 RDS Servers. The Servers have Office 2013 installed so turning off the Search Service is not an Option. We are using User Profile disks and logoff was getting slower
as time goes by. Reading in another thread if have deleted the Subkeys under
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Search\CrawlScopeManager\Windows\SystemIndex\DefaultRules
and restarted the Search Service.
This Resulted in a lighning fast logoff ( less then 5 Seconds) before that logoff took up to 2 Minutes. Looking at the Reg Key´s i found that underneth the mentioned Key there was a subkey for each user that has EVER loged on to this Server. Normal load
should be about 30 Users and i found about 700 subkey´s. To it seems that this causes the Search Service searchindexer.exe to read thru all this key´s witch i think is not the Problem ( Internet Explorer does far more reads and writes) but what happens
with the Information.
Maybe it has to to with the fact, that we are using User Profile Disks ?
In the Search Service Policy i have excluded "C:","users homedrive" and the Share where the Users share theyr data, for the Search Service to exclude.
So does anybode have experience with Seach Service on RDS Servers with Office maybe with User Profile Disks ?
Thanks ReinerHi Reiner,
You can check the following article might helpful to resolve your case.
Incomplete search results may occur in Outlook when a PDF iFilter is installed
http://support.microsoft.com/kb/2925203/en-us
Also try uninstalling office 2013 application and then reinstall by running change user /install command in elevated command prompt on RDS server prior to install software's. Post software installation you need to run
change user /execute command on server
http://technet.microsoft.com/en-us/library/cc742815.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Update KB2685811 fails to install on Windows 7 64bit
Update KB2685811 fails to install on Windows 7 64bit FROM WINDOWS 8.1
Hi,
Based on my research, this update package only applies to Windows 7 and Windows server 2008 R2. Windows 8.1 doesn't support this update.
If you need any further assistance, please feel free let us know.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Window search service not running
window search service not running how i can fix it?
This question was solved.
View Solution.Hi,
From the Desktop, hold down the Windows key and press -
Does Safari run in Windows Server 2008 R2 (Terminal Services)?
does Safari run in Windows Server 2008 R2 (Terminal Services)?
Hi Jess,
Here are two things I suggest you check:
The Monitoring interval is set to 900 minutes, would the profile size get reduced after 15 hours and run
gpupdate/force?
Since the Sessenv.dll version is higher than the ones described in KB 2575946, the issue is supposed to be fixed. I suggest you run System File Checker to scan all protected system files.
In addition, you can also collect Gpsvc.log to determine if policies are applied successfully.
More information for you:
System File Checker (sfc)
http://technet.microsoft.com/en-us/library/bb491008.aspx
Group Policy not being applied
http://social.technet.microsoft.com/Forums/windowsserver/en-US/9884d06d-b5f8-44c9-a703-7b5211f1e0ba/group-policy-not-being-applied?forum=winserverGP
Best Regards,
Amy -
Testing moving to new Windows Server 2008 R2 DHCP Server.
HI all,
I want to bring up a new DCHP server on an existing Windows Server 2008 R2 Domain Controller. The current DHCP server is a Windows 2003 Domain Controller. I have moved all the FSMO Roles to the new 2008 R2 domain controller
with the plan to eventually demote the 2003 server and take it off the network. I have the dhcp role installed on the new Windows Server 2008 R2 and have duplicated the exact settings (reservations, scope, etc.) from the old windows 2003 server
on the new 2008 R2 server. My plan was simply to disable the dhcp service on the old windows server 2003 and then authorize the new Windows Server 2008 R2 DHCP Server. However, after reading several articles, I understand that once you authorize
a new dhcp server, the old dhcp sever is unauthorized. I also read where several people had major issues with the new dhcp server not handing out IP Addresses even though the new dhcp server was authorized successfully. Since this is
a production network, I would like to employ the correct method to bring up the new dhcp server. Also, if there is a problem, is there an easy way to go back to the original dhcp server? Thanks for your help.
FD
Bob AndresYou can authorize multiple DHCP servers on a network.
You can activate and deactivate different scopes independently. So you can test DHCP functionality with a test scope.
Also, you can stop the old server in many ways that allow it to be online very rapidly: stop the dhcp server service, deactivate the scopes and yes even de-authorize the server.
My advice would be to built a test so you are confident (=very important) and not to fear the final onlining too much. DHCP is no rockets science. If you've replicated the configuration and are aware of possible IP Helper configurations on your routers/switches,
it should all work out fine.
MCP/MCSA/MCTS/MCITP -
Windows Server 2008 and SQL Server 2008 R2 - ?? for replication with Oracle
Hello:
I am running Windows Server 2008 and SQL Server 2008 R2 - 64 bit
I need to replicate data between the SQL 2008 and Oracle 11.2 ?? with Oracle being the publisher
I also would lile SqlPlus installed on the server.
I need a definite answer as to what I should download from the Oracle download area. There are just so many packages and so many version I dont know what to download.
ThanksHi,
Currently Microsoft Windows Server 2008 and SQL Server 2008 are not supported for SAP Business One.
For detailed information about all supported platforms, we have the following link for your reference:
www.service.sap.com/smb/sbo >product availability > supported platforms.
Regarding the information on the service marketplace this is updated on a regular basis and provides the most up to date information regarding the supported platforms for Business One.
Platforms not mentioned in this documentation are not supported.
hope it helps,
Regards,
Ladislav
SAP Business One Forum Team -
Failed to Install the Crystal Reports 2008
Post Author: cechow
CA Forum: Crystal Reports
Hi,
I am facing some error message when installing the Crystal Reports 2008 that I have purchased. I am currently working on a Windows XP Pro SP2, 1 GB RAM, 60 GD Free Space to install the Crystal Reports but failed. The error stated on the Crystal Reports installation screen is "Crystal Reports 2008 Setup has Failed".
Thanks.
AdrianPost Author: cechow
CA Forum: Crystal Reports
Basic Template
Product: Crystal Report 2008
Version:
Patches Applied: I'm not sure what patches need to be installed
Operating System(s): Windows XP Professional SP2
Database(s): SQL Server 2000 sp3a
Error Messages: Failed to INstall the Crystal Reports 2008.Steps to Reproduce: When I entered the CR disc in the CD ROM, there was no auto-run, then i decided to browse into the CD and execute the Setup.exe which then prompt the error above. Please advise.Is there some Pre-requisites that I need to install, any JRE or some other application? -
How to add Windows 2012 R2 RDS to Existing Windows 2008 R2 Terminal Server
I currently have a Windows 2008 R2 Terminal Server running and I am looking to add a Windows Server 2012 R2 server to it. All I see when I google the setup is only for Windows Server 2012 R2 RDS, cant find anything to integrate with a current 2008 R2 Terminal
Server.
Can anyone help with this or point me to a blog I possibly missed?
Thanks.Hi,
Thanks for your comment.
Yeah, agree with diramoh; as already commented. If you want user session from RDS Server 2012 R2 then you need to install RDS License role on server 2012 R2, purchase and install RDS CAL (per user or per device) according your requirement and then you
can use user session for server 2012 R2 and also for lower version.
But as you already have Server 2008 R2 RDS CAL, then with that you can simply access lower version but can’t manage Server 2012\R2.
For more information, you can refer following document.
Licensing
Windows Server 2012 R2 Remote Desktop Services
Hope it helps!
Thanks.
Dharmesh Solanki
Maybe you are looking for
-
How to wrap a cell in a xls file created from SQLplus
Hi, I have the following sql script in Unix which creates a xls file for me - set pagesize 9999 lines 130 set echo off set termout
-
Selection criteria in XL Reporter
Hi, I am currently writing a sales report using XL Reporter. It needs to allow user to specify the document date and Item Group that they want to look at. (a) Item Group The only dimension that I can retrieve "Item Group" is Dimension Item. If I crea
-
Best practice: text/value formatting based on a value
Hi all. How would you make a field display different text/value based on the actual value of a field? I have a field in a bean called retriesPerSecs. If this value is less than 1, then I want to display the text/value "{retriesPerSecs*60} retries per
-
Struts in Tomcat ( Exception Handling)
When an exception is rised in an struts application, the StackTrace of the Exception is logged. Ex: 2004-10-27 12:16:27,960 - DEBUG -- org.apache.struts.action.ExceptionHandler -- (ExceptionHandler.java: logException :122) -- ExceptionHandler caught
-
Working with clobs or extremelly large strings - please urgent
Hi, i have a VARCHAR2 variable that is VARCHAR2(32767), is this possible? and i receive to the procedure a VARCHAR2 with almost 28000 character, then i have to insert that value as a CLOB in a xmltype table. This would look like a question to XML DB