Windows Security user name/password prompt when trying to remote access personal cloud storage device

I have 2TB WD Book Live drive setup at home and is working fine, including remote accessing by internet. However using a colleague's computer at the office recently, her computer would always prompt me for Windows Security username and password. I've tried
keying her admin user name/password and well as the router's admin/admin combinations and still doesn't allow me to access the cloud drive properly. However I have had no problem accessing the same drive remotely using other colleagues computers.
The exact message prompt as follows: Windows Security. The server 192.168.1.1 is asking for your user name and password. The server reports that it is from index.htm. WARNING: Your user name and password will be sent using basic authentication on
a connection that isn't secure.
Please help me understand the problem and its solution. Thank you.

Hi,
The IP address 192.168.1.1 is your Router server address, isn't it? I doubt there should some limition in your colleague's system. Please check it. Also you can try to disable security software for test to access your cloud.
The problem isn't your cloud server Authorization.
Roger Lu
TechNet Community Support

Similar Messages

Doesn't recognize user name/password combo when trying to send pics from i photo? Help!?!?, doesn't recognize user name/password combo when trying to send pics from i photo? Help!?!?

I am trying to e-mail pics from a new mac book pro just had all my photos and data moved over from my old mac and when I try to e-mail through i photo its tell in that mail e-mail server doesnt recognize my user name and password combo? I am able to e-mail ok so I think it's the settings in i photo?

Try posting in the Mail forums - https://discussions.apple.com/community/mac_os/mac_os_x_v10.6_snow_leopard and cross-post in the iPhoto forum area - https://discussions.apple.com/community/ilife/iphoto

User name password prompt is not working

Hi Experts,
I have a screen in a BSP application in which , I have two links.
These two links are the links to the screens of a different BSP application for which default username password is not set.
But when I clicked the first link its prompting for the user name and password but its not happening for the second link.
Its also vice versa.
I checked the below link which explains about the way password details are prompt but I am not sure of how to handle this and have the prompt for username and password for both the links.
http://help.sap.com/SAPHELP_470/Helpdata/EN/5a/f8b53a364e0e5fe10000000a11405a/frameset.htm
Your inputs will be helpful.
Regards,
Gopal

Hi,
this sounds a case for Single Sign On, especially if you´re calling your 3 applications from the Enterprise Portal. You have to talked to your administrators for EP and SAP, since it is a complicated task.
Try this link for more about the user and this link for SSO.
after entering username and password for the first time, somehow the information remains alive event when you close your BSP application and call another one. This is a very bad security case if you´re moving your applications into production.

Can't Connect ASDM and Console Forces User Name: & Password: Prompts

After pulling a brand new ASA 5515 out of the box this morning, I spent countless hours scratching my head wondering why:
1. I cannot establish an HTTPS connection to the Management port - https://192.168.1.1/admin
2. When connecting via the console port I get prompted with a username and password sequence that I don't know
I get an SSL Version Error message when I try to connect with any browser. although I did find a way to resolve it, it requires a console port connection which is not working either.
This is not my typical experience with the console or ASDM port setup. What is going on? Any help from anyone would be so appreciated.
Thank you,
Richard

Hmm,
To my understanding Console connection on a fresh unit shouldnt ask for a username and it shouldnt even have an enable password (should be able to leave it blank and press enter). Or atleast that is how I remember it.
I am not sure if the new ASA5500-X models are different.
I think on when using ssh (or was it telnet) without username configured required you to use username pix and password cisco to log in.
- Jouni

Windows 8 user getting error 2343 when trying to uninstall iCloud

I had to uninstall iTunes & all associated files due to a sync issue with a new device. Anyway. I uninstalled iCloud 3.1 with no problems. I then tried to uninstall v3.0.7! I get error 2343.
I have cleared the registry, updated all my windows services, reinstalled iTunes - everything now working great, apart from I can't reinstall iCloud.
Any help would be greatly appreciated.
Thanks

>neither in the adobe site.
If you go to the thread list for Reader and choose "Search Forum" and use 1316 as your search parameter, you get tons of hits.

Recurring [-4008]: Unknown user name/password combination

Hi,
I am using MaxDB 7.6.00 BUILD 012-123-102-632 with JBoss through the JDBC Driver 7.6.0 on a Windows XP box.
Sometimes, seldomly, after a reboot, I have the error :
2008-05-28 14:52:40,093 WARN http://org.jboss.resource.connectionmanager.JBossManagedConnectionPool Throwable while attempting to get a new connection: null
org.jboss.resource.JBossResourceException: Could not create connection; - nested throwable: (com.sap.dbtech.jdbc.exceptions.DatabaseException: -4008: Unknown user name/password combination)
When this happens, I can still connect to the databse using both the "Database Manager" or the java based "Db Visualizer" connecting as JBOSS/JBOSS. The "JBoss" user is registered as being of the type "dba".
If I stop the sapdb windows service and my JBoss server windows service and restart them slowly and calmly. The problem disapears.
I suspect that, sometimes, for some reason, my JBoss server tries to connect with the database when the latter is not "completely" ready. But by "completely" I don't really know what I mean.
Did anyone experience that kind of problem ?
Thank you
Regards
Francis Girard

Hi,
I am using MaxDB 7.6.00 BUILD 012-123-102-632 with JBoss through the JDBC Driver 7.6.0 on a Windows XP box.
Sometimes, seldomly, after a reboot, I have the error :
2008-05-28 14:52:40,093 WARN http://org.jboss.resource.connectionmanager.JBossManagedConnectionPool Throwable while attempting to get a new connection: null
org.jboss.resource.JBossResourceException: Could not create connection; - nested throwable: (com.sap.dbtech.jdbc.exceptions.DatabaseException: -4008: Unknown user name/password combination)
When this happens, I can still connect to the databse using both the "Database Manager" or the java based "Db Visualizer" connecting as JBOSS/JBOSS. The "JBoss" user is registered as being of the type "dba".
If I stop the sapdb windows service and my JBoss server windows service and restart them slowly and calmly. The problem disapears.
I suspect that, sometimes, for some reason, my JBoss server tries to connect with the database when the latter is not "completely" ready. But by "completely" I don't really know what I mean.
Did anyone experience that kind of problem ?
Thank you
Regards
Francis Girard

When trying to send photos using iphoto a window comes up and says that email server did'nt recognize user name /password ...what do i do to correct this please marie

hello when I try to send photos using the iphoto a window comes up to tell me that my email server didn't rercognize user name /password how do i correct this .. as i have cganged my email address but i can't get rid of the old one thank you marie

Hi Cody\'sgirl,
If you are having issues emailing photos directly from iPhoto, you may want to double check the email account information that is set in iPhoto. You may find the following article helpful (the section below is about setting up a new account, but it should be the same location to check existing account info):
To set up a Photo Mail account:
Choose iPhoto > Preferences, and then click Accounts.If you’re in full-screen view, move your pointer to the top of the screen to make the menu bar appear.
Click the Add button in the lower-left corner.
Click Email, and then click Add.
Choose your email service provider.If your service provider isn’t listed, choose Other.
Type the requested information.If you use the Mail application included with OS X, some account information might be filled in already. If you’re not sure what to type, contact your service provider.
You can set up more than one Photo Mail account by repeating these steps for each account. When you send an email, you can change the outgoing account by clicking the From pop-up menu and choosing an account.
iPhoto '11: Email your photos
http://support.apple.com/kb/PH2421
Regards,
- Brenden

Prompting for User name/Password after I close the document

Hi guys,
I have implemented FSDB repository. When I open a KM document and close it, I am prompted with the authentication window to enter username/password. When I enter correct username/password, it doesn't accept it. However when I close this authentication prompt, I have no issues continuing my portal session.
Please help guys.
Note: I am on EP6.0, SP15.
Regards,
Deepak

Hi Deepak,
I am using SPS15 and had similar issues with MS documents. We were receiving authentication prompts. We omitted the MS Docs from the HTTP compression and then applied this RegFix. For us it seemed like it was an update coming back to the folder where the documents are stored upon opening (for PPT's) and on open and close for DOCS. From what I read in the MS note with the regfix - it seems like updates to the MS folder stucture for the purposes of Sharpoint collaboration stuff.
Anyway,
<a href="http://SDN Blog on Disabling Secondary Authentication">https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2083</a>
<a href="http://support.microsoft.com/default.aspx?scid=kb;en-us;838028">MS K# Article</a>
I hope that this helps,
Judson

How do I open my contribute program when it tells me user name/password is incorrect when I have not changed it?

How can I get into my contribute CS4 program when it says my user name/password is incorrect and I have never changed either of these?

Yes. FTP username and password.

What do I do when IPhoto says "mail server does not recognize user name/password?

What do I do when IPhoto says "mail server does not recognize user name/password?

Fixed by resetting my password to Apple's new protocol! In my case, I had to add a capitol letter.
Reset here:
https://iforgot.apple.com/cgi-bin/WebObjects/DSiForgot.woa/wa/iforgot

User Name/Password Protecting a Directory

I've seen this done without using a server-side scripting
method, but
instead using a configuration file to set a user name and
password for a
protected directory on an Apache server - where it throws
back the prompt
when trying to access it.
Does anyone know about this "configuration" file that allows
you to do this?
Where can I get the file from and edit it?
Shane H
[email protected]
http://www.avenuedesigners.com

Shane H wrote:
> I've seen this done without using a server-side
scripting method, but
> instead using a configuration file to set a user name
and password for a
> protected directory on an Apache server - where it
throws back the prompt
> when trying to access it.
>
> Does anyone know about this "configuration" file that
allows you to do this?
> Where can I get the file from and edit it?
>
http://www.bc.edu/offices/help/meta-elements/doc/articles/html/WEB-pwssecurefolder.shtml
Cheers jojo
Adobe Community Expert for Dreamweaver 8
http://www.webade.co.uk
http://www.ukcsstraining.co.uk/
Extending Knowledge, Daily.
http://www.communityMX.com/
Free 10 day trial
http://www.communitymx.com/joincmx.cfm

POP3 -Keep asking for user name & Password

Hi,
We have exchange 2003 server with Service pack 2. We have user who check their mails through Outlook 2003, Outlook web access & some users are using POP3 to download the messages.
Since last few weeks, we are getting the complained that when engineers are trying to configured users account in Outlook with POP3 configuration, its keep asking for user name & password. But with same user name & passwords user is able to check their mail through Outlook web access.
In some of our site, users are able to download messages through pop3 account but this account was configured long back.
Kindly advise.

HI,
This is happening mainly when
1. user changed his password through Outlook web access next time its keep poping up for password & it will not accept the new passord.
2. if user is using OWA & when we try to configured his mail in Outlool with POP3 .
See if i remove exchange attributes from user's account & then delete the users from AD & Recreated with same user name, Password & reconnected to that user to his old mailbox, it;s work fine.
Regards,
Chetan
POP3 is enabled by default for all the users.

[-4008]: Unknown user name/password combination (MaxDB, Java)

Hey,
I'm having some troubles to connect to MaxDB using Java. I'm getting some error when I try to run my program.
import java.sql.*;
public class Hello
public static void main(String[] args)
     throws ClassNotFoundException, SQLException
          String username = "DBM";
          String password = "azerty";
          String dbname = "SAPDB";
          Class.forName ("com.sap.dbtech.jdbc.DriverSapDB");
          Connection connection = DriverManager.getConnection("jdbc:sapdb:" + dbname, username, password);
Exception in thread "main" com.sap.dbtech.jdbc.exceptions.DatabaseException: [-4008]: Unknown user name/password combination
     at com.sap.dbtech.jdbc.packet.ReplyPacket.createException(ReplyPacket.java:69)
     at com.sap.dbtech.jdbc.ConnectionSapDB.throwSQLError(ConnectionSapDB.java:768)
     at com.sap.dbtech.jdbc.ConnectionSapDB.execute(ConnectionSapDB.java:434)
     at com.sap.dbtech.jdbc.ConnectionSapDB.execute(ConnectionSapDB.java:325)
     at com.sap.dbtech.jdbc.ConnectionSapDB.doConnect(ConnectionSapDB.java:277)
     at com.sap.dbtech.jdbc.ConnectionSapDB.<init>(ConnectionSapDB.java:81)
     at com.sap.dbtech.jdbc.DriverSapDB.connect(DriverSapDB.java:184)
     at java.sql.DriverManager.getConnection(Unknown Source)
     at java.sql.DriverManager.getConnection(Unknown Source)
I checked the User and Password with the GUI (Database manager) and everything works fine.
I've also added the .jar in my Project Library.
Any ideas ?
Thanks

Looking at your screen shot, it seems the database instance itself hasn't been correctly created because you lack permissions to do so. Subsequently, all your connection attempts basically fail because the database does not exists. I'm no real expert in SAP MaxDB administration on Microsoft Windows, but I read about System Error 5 once in a while earlier, have a look at [http://www.syseva.com/2009/05/operating-system-error-5-5access-is-denied/|http://www.syseva.com/2009/05/operating-system-error-5-5access-is-denied/]. Overally, I suspect you don't have the permissions you need to have (operating system/file system -wise) in order to create the files belonging to a MaxDB instance (and/or required by the server and tools, such as the dbmsrv ... err file mentioned in the screen). Maybe you should check your system permissions? Are you administrator or member of the appropriate groups [http://maxdb.sap.com/doc/7_7/0e/218650d996419d91f6b234766eadd3/content.htm|http://maxdb.sap.com/doc/7_7/0e/218650d996419d91f6b234766eadd3/content.htm]? As pointed out, I'm no MaxDB/Windows expert, but this seems likely to be a problem as far as your screenshot is concerned.
Cheers,
Kristian

Unknown user name/password combination

Hi SAPDBV Gurus,
1. I did a full Live cache backup of system A (LCZ)
2. Did a restore with initialization to target. (LCR)
3. I checked the system logs snm21 :- Unknown user name/password combination, and also in live cache logs
4. When I tried to do a load systab with dbmcli> , I see the message :- -24907,ERR_DBAWRONG: wrong SYSDBA
I could not create the DBADMIN user or reset the password, it gives a user_put error.
I also found that in the source the sysdba user was DBADMIN (LCZ), and the target was SYSDBA (LCR)
Thanks,
Naren
> Unknown user name/password combination
Database error -4008 at CON

Hello,
Please update with additional information:
-> What are the versions of the source & target liveCache instances?
-> Please update with outputs of the following commands:
dbmcli -u control,<controlpw> -d LCR
<enter>
Dbmcli on LCR>db_state
Dbmcli on LCR>sql_connect
Dbmcli on LCR>sql_execute select * from users
Dbmcli on LCR>load_systab -u DBADMIN,DBADMIN -ud DBADMIN
Dbmcli on LCR>exit
-> What is the dbm users? < if the liveCache instances were not created with control user >
-> Please overview the SAP note 877203.
Thank you and best regards, Natalia Khlopina

-4008 Unknown user name/password combination

Hi All,
We are installing SAP NW 7.4 with MaxDB 7.8 on Windows server 2008 R2, When in the phase Create database schema for ABAP its giving error like below.
"[-4008] Unknown user name/password combination"
Below is the output from SdbCmdOut.log
Tue Aug 12 20:31:19 IST 2014 | class com.sap.sdb.sllib.models.software.Software | Software object initialized Sucessfully
Tue Aug 12 20:31:19 IST 2014 | class com.sap.sdb.sllib.models.database.DatabaseParameter | Create new database parameter object with name: MCOD value: and comment:
Tue Aug 12 20:31:19 IST 2014 | class com.sap.sdb.sllib.utils.connection.JdbcDriver | JDBC driver path: D:\sapdb\programs\runtime\jar\sapdbc.jar
Tue Aug 12 20:31:19 IST 2014 | class com.sap.sdb.sllib.utils.connection.JdbcDriver | Class: com.sap.dbtech.powertoys.DBM loaded
Tue Aug 12 20:31:19 IST 2014 | class com.sap.sdb.sllib.utils.connection.JdbcDriver | Class: com.sap.dbtech.jdbc.DriverSapDB loaded
Tue Aug 12 20:31:19 IST 2014 | class com.sap.sdb.sllib.utils.Xserver | Use Java process call.
Tue Aug 12 20:31:19 IST 2014 | class com.sap.sdb.sllib.utils.Xserver | Execute command: D:\sapdb\programs\bin\x_server.exe start
Tue Aug 12 20:31:19 IST 2014 | class com.sap.sdb.sllib.utils.connection.JdbcDriver | Establish dbmcli session
Tue Aug 12 20:31:19 IST 2014 | class com.sap.sdb.sllib.utils.connection.session.DbmJdbcSession | Connect to database: SID on host: HOSTNAME
Tue Aug 12 20:31:19 IST 2014 | class com.sap.sdb.sllib.utils.connection.session.DbmJdbcSession | Logon with user: control
Tue Aug 12 20:31:19 IST 2014 | class com.sap.sdb.sllib.utils.connection.session.DbmJdbcSession | Run command: param_directget MCOD
Tue Aug 12 20:31:19 IST 2014 | class com.sap.sdb.sllib.utils.connection.session.DbmJdbcSession | MCOD NO
Tue Aug 12 20:31:19 IST 2014 | class com.sap.sdb.sllib.utils.connection.session.DbmJdbcSession | Close dbmcli Session.
Tue Aug 12 20:31:19 IST 2014 | class com.sap.sdb.sllib.runtime.SdbLibInstance | End of command section: PARAM_GET
Tue Aug 12 20:31:19 IST 2014 | class com.sap.sdb.sllib.runtime.SdbLibInstance | *************************************************************
Tue Aug 12 20:31:20 IST 2014 | class com.sap.sdb.sllib.runtime.SdbLibInstance | Start new command section: GET_SQL_USERS
Tue Aug 12 20:31:20 IST 2014 | class com.sap.sdb.sllib.utils.Dbmcli | Use Java process call.
Tue Aug 12 20:31:20 IST 2014 | class com.sap.sdb.sllib.utils.Dbmcli | Execute command: D:\sapdb\programs\pgm\dbmcli.exe -s dbm_version build
Tue Aug 12 20:31:20 IST 2014 | class com.sap.sdb.sllib.utils.sdbregview.SdbRegviewIsolated | Use Java process call.
Tue Aug 12 20:31:20 IST 2014 | class com.sap.sdb.sllib.utils.sdbregview.SdbRegviewIsolated | Execute command: D:\sapdb\programs\bin\sdbregview.exe -l -delimiter -DELIM-
Tue Aug 12 20:31:22 IST 2014 | class com.sap.sdb.sllib.models.software.Software | Software object initialized Sucessfully
Tue Aug 12 20:31:22 IST 2014 | class com.sap.sdb.sllib.utils.connection.JdbcDriver | JDBC driver path: D:\sapdb\programs\runtime\jar\sapdbc.jar
Tue Aug 12 20:31:22 IST 2014 | class com.sap.sdb.sllib.utils.connection.JdbcDriver | Class: com.sap.dbtech.powertoys.DBM loaded
Tue Aug 12 20:31:22 IST 2014 | class com.sap.sdb.sllib.utils.connection.JdbcDriver | Class: com.sap.dbtech.jdbc.DriverSapDB loaded
Tue Aug 12 20:31:22 IST 2014 | class com.sap.sdb.sllib.utils.Xserver | Use Java process call.
Tue Aug 12 20:31:22 IST 2014 | class com.sap.sdb.sllib.utils.Xserver | Execute command: D:\sapdb\programs\bin\x_server.exe start
Tue Aug 12 20:31:22 IST 2014 | class com.sap.sdb.sllib.utils.connection.session.SqlJdbcSession | Start new connection with URL: jdbc:sapdb://HOSTNAME/SID connect user: superdba
Tue Aug 12 20:31:22 IST 2014 | class com.sap.sdb.sllib.utils.DbCommand | com.sap.dbtech.jdbc.exceptions.DatabaseException: [-4008]: Unknown user name/password combination
Tue Aug 12 20:31:22 IST 2014 | class com.sap.sdb.sllib.api.exceptions.DatabaseCommandException | com.sap.sdb.sllib.utils.connection.JdbcDriver.createSqlSession(JdbcDriver.java:69)
Tue Aug 12 20:31:22 IST 2014 | class com.sap.sdb.sllib.api.exceptions.DatabaseCommandException | com.sap.sdb.sllib.utils.DbCommand.getAllSqlUsers(DbCommand.java:2054)
Tue Aug 12 20:31:22 IST 2014 | class com.sap.sdb.sllib.api.exceptions.DatabaseCommandException | com.sap.sdb.sllib.utils.cmd.ident.classes.GET_SQL_USERS.run(GET_SQL_USERS.java:26)
Tue Aug 12 20:31:22 IST 2014 | class com.sap.sdb.sllib.api.exceptions.DatabaseCommandException | com.sap.sdb.sllib.utils.DbCommand.runCommand(DbCommand.java:3469)
Tue Aug 12 20:31:22 IST 2014 | class com.sap.sdb.sllib.api.exceptions.DatabaseCommandException | com.sap.sdb.core.main.cmd.SdbCmdMain.<init>(SdbCmdMain.java:67)
Tue Aug 12 20:31:22 IST 2014 | class com.sap.sdb.sllib.api.exceptions.DatabaseCommandException | com.sap.sdb.core.main.cmd.SdbCmdMain.main(SdbCmdMain.java:212)
Kindly Suggest me to resolve.
Regards,
JD.S

Hi Deepak,
I have executed the below commands,
xuser -U c -u CONTROL,<password> -d SID -n HOSTNAME -S INTERNAL set
xuser -U w -u CONTROL,<password> -d SID -n HOSTNAME -S INTERNAL set
After execution of the commands i have retry the same installation still i am getting same error.
Kindly suggest,
Regards,
Sree

Windows Security user name/password prompt when trying to remote access personal cloud storage device

Similar Messages

Maybe you are looking for