(Windows Server 2003) Cannot run SQLSERVERAGENT service under non admin user after SP1 Installation

Hi All,
I need a hand here, referring to this knowledge base on Microsoft (http://support.microsoft.com/default.aspx?scid=kb;en-us;Q283811) i applied this knowledge base, and it worked, the MSSQL and SQLSERVERAGENT have run under local non admin account.
But after i installed SP1, MSSQL service is ok, but SQLSERVERAGENT wont run. The warning message is : "Some service run and then stop if they have no work to do."
Is there any way i can install SP1 but in the same time run SQLSERVERAGENT under local non admin account?
Your assistance will be much appreciated
thank you very much in advance.
Felix Adhitya

Please go to the windows services list and check that the service is configured as start Automatic first
1. run -> services.msc -> look for a service named "SQL Server Agent" -> proporties
2. make sure the startup type is Automatic
3. start the service again.
4. If it stop then post for us the full error message from the sql log file
5. move to the "Log On" tab and check what Log on you are using (this will be used for next step if startup type Automatic did not help, therefore write this information).
[Personal Site] [Blog] [Facebook]

Similar Messages

Is Windows Server 2003 R2 Entreprise Edition Service Pack 2 supported?

I tried to install ColdFusion 9 but wasn't able to finish.
My OS is - Windows Server 2003 R2 Entreprise Edition Service Pack 2
Regards
mangeo

Here is what I read from the http://www.adobe.com/products/coldfusion/systemreqs/ page:
Microsoft® Windows® 2000 Professional with Service Pack 3;
Windows 2000 Server, Advanced Server, or Datacenter Server with Service Pack 3;
Windows Server® 2003 Web, Standard, or Enterprise Edition with Service Pack 1 and R2;
Windows Server 2008;
Windows XP Professional or Home Edition; or Windows Vista® with Service Pack 2
So, it seems the SP2 of the Microsoft Windows 2003 Enterprise Edition is not supported.
Is it true?

Windows server 2003 cannot find the media player plug in

i have searched for hours now and cant find the needed plug in for the recent update on fire fox for windows server 2003

i found this, the link is active, but i '''do not known and i can not test it myself for what it is in there''' !
http://techsupportpeople.blogspot.com/2011/02/media-player-firefox-plugin-windows.html
and i do not think is for the last update because is from feb '11
thank you

Running FF as regular (non-admin ) user under Windows. FF 34 window moves down unexpectidly when adding a tab or resizing the window. Was OK w/ FF 17

I resize FF window, or add/remove a tab. The entire window moves down.

Opening some pages, such as Oracle eGroupware calendar causes the window to move down several steps as well.
W2008 R2 + Remote Desktop Service.

Forms cannot run at Windows Server 2003

Windows Server 2003
Forms 10.1.02
Database 10g 10.2.0.1 Production
every time i run the forms application but the firefox show it is crash...
also my Windows Server 2003 cannot run any java application...
need some advice from experts here
THANKS
dausnasir

The kinda answer I like: download, copy, mesh, hack. Looks very nice, must work in most cases, but not this time for me. Behavior was exactly the same, running the nightly build.
Just for the records:
Safari prefs in my Windows live happy in:
C:\Documents and Settings\Administrator\Application Data\Apple Computer\Safari
C:\Documents and Settings\Administrator\Local Settings\Application Data\Apple Computer\Safari
These days I installed an Safari in a brand new 2003 and worked nice. Bug 4 x 1 Safari. Bug still winning.
So, it must be some stuff, some little tricky service or software I install in my usual Windows.
Anyway, thank you very much...
If someone have some clue, I'll apreciate

Cannot Edit Group Policies - Windows Server 2003 R2

Hello, everyone.
I have a server running Windows Server 2003 R2 Standard Edition Service Pack 2 32-bit. Group policies were working fine until sometime last week. Now, whenever I would launch GPMC, I would get an error message that said "Windows cannot find gpedit.msc.
Make sure you typed the name correctly and try again.' Then, after I click OK, I would get another error message that said "Failed to start the group policy snap-in. The gpedit.msc file may be missing, files with the .msc extension may not be associated
with mmc.exe, or you may not have the appropriate rights."
I removed GPMC to see if that would work, but I still get the same error messages when I try to edit group policies through ADUC. I also tried de-registering and re-registering the gpedit .dll files but I did not have any luck.
Is there anything else I can try? I do not have any group policies that I need to deploy at the moment, but I would like to get this fixed as soon as possible.

> snap-in. The gpedit.msc file may be missing, files with the .msc
> extension may not be associated with mmc.exe, or you may not have the
> appropriate rights."
So you verified that gpedit.msc exists and that it can be launched
through "run"?
> de-registering and re-registering the gpedit .dll files but I did not
How did you do that exactly?
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Windows Server 2003 R2 Enterprise Edition 32 bits Service Pack 2 never finishes searching for updates and use 100% of CPU.

Hi everyone, I am having issues updating a clean Windows Server 2003 R2 Enterprise Edition 32 bits Service Pack 2, so any help with be appreciated cause I've already tried all my cards for the past 5 days in this particular issue without success.
All I did so far is installing Windows Server 2003 R2 Enterprise with Service Pack 2, open IE to update, it keeps searching for updates and never stop, after 20mn to 30mn the process svchost.exe start using 100% of my CPU.
I already tried the following scenarios:
1- Install IE8, install the update KB927891 and the Windows Update Agent 3.0 (I already had this one installed). Reboot and run windows update trough IE8 and the problem did not solved.
2- Install those 2 software "MicrosoftFixit.wu.MATSKB.Run" and "MicrosoftFixit50777", open IE to update, it still hangs and continues eating my CPU. This is the output of "MicrosoftFixit".
Windows Update error 0x8007000D(2014-01-06-T-06_06_34A) --> Not Fixed
Cryptographic service components are not registered (This service is actually running successfully) --> Not Fixed
3- I found the following script that would register some DLL, deleting the "SoftwareDistribution" and forcing windows update to solve the problem and nothing happened either.
Link to script:
http://gallery.technet.microsoft.com/scriptcenter/Dos-Command-Line-Batch-to-fb07b159#content
Here is a link to the content of my WindowUpdate.log file:
https://skydrive.live.com/redir?resid=883EE9BE85F9632B%21105
Thank you in advance for helping.

All I did so far is installing Windows Server 2003 R2 Enterprise with Service Pack 2, open IE to update, it keeps searching for updates and never stop, after 20mn to 30mn the process svchost.exe start using 100% of my CPU.
Herein is the root cause of your issue. A topic that's been discussed in several blogs, forums, and even in the media since September regards a known issue with attempting to patch IE6 RTM via Windows Update.
Aside from that particular issue... browsing the Internet with an unpatched instance of IE6, especially from a Windows Server system, is also asking for a world of hurt.
Might I suggest the following:
Download the IE8 for Windows Server 2003 installer to a thumb drive.
Download the latest Cumulative Security Update for IE8 for Windows Server 2003 to a thumb drive.
Reinstall Windows Server 2003 with Service Pack 2.
Upgrade to IE8 from the thumb drive installer and apply the
Cumulative Security Update.
Now your machine is capable of safely browsing to Windows Update to install the rest of the updates (well, maybe, there's also all those other Security Updates from the past seven years that your machine still has vulnerabilites for -- even those seven
years of updates are going to take a Very Long Time to scan for, download, and install).
Why don't you have a WSUS server? -- noting, wryly, that you've posted in the *WSUS* forum.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Indesign Server CS4 service is not starting on Windows Server 2003 64bit

Hello guys,
I am not able to start Indesign Server CS4 service on windows Server 2003 SP2 64bit .
I have successfuly configured the service with InDesignServerService.msc, set the port to 18555. InDesignServerWinService the Log On option is set to "This Account". Also tried using different accounts!
When starting the indesign service from windows Service control panel I get this error:
Could not start the InDesignServerService x64 service on Local Computer.
Error 1053: The service did not respond to the start or control request in a timely fashion.
Error log from windows Event viewer:
Error
Timeout (30000 milliseconds) waiting for the InDesignServerService x64 service to connect.
Indesign server application works if launching from command line with the specified port 18555.
If trying to lauch IndesignServerService.exe from command line, there is a delay and finally nothing happens.
I have also tried launching 32bit indesign server service and the same error comes.
Would be grateful for your thoughts!
Message was edited by: Andrewdev
Server specs:
Windows Server 2003
Standard x64 Edition
Service Pack 2
Intel Xeon CPU 3.00Ghz
9.76 GB of Ram
Server is running virtualy on Xen hypervisor, there is no antivirus and windows firewall is disabled.

Hi Chandi,
      If Microsoft fix is not working or it is too old to apply then go for manual process i.e.;
      In the Microsoft KB article follow this :-
     Services that use the local system account to log on to a Windows Server 2003-based computer start if the Allow service to interact with desktop
     option is turned on. To turn this option on, follow these steps:
In the Services tool, click the service that you want to start, and then click Properties.
Right-click the Log On tab, and then click to select the Allow service to interact with desktop check box.
Click OK to exit the Properties dialog box.
   This will solve your problem.
   Thanks,
   Akansh Upadhyaya,
   System Engineer,
   (Windows + Unix.)

Active Directory not working Windows Server 2003 R2

Hi,
Like the subject said my root problem is either my Active Directory or DSN server. In order to properly explain the situation I will have to make the full Story. I was contacted by a family member to help
out a Non profit organisation with there server problem. Their current config is Windows Server 2003 R2 Running DC,AD,DNS,DCHP,File Services( i know is not efficient).
Here is how I come in to play, prior of me helping the had another server running same spec started having hardware failure and the invested in a new server. The person that set it up did replicate the server
on the new one as far as AC and Domain controller but nothing else. We ll now the DC01 failed and no user cannot login into a new computer
or if a new employee will try to added the changes don't take effect. Seeing the situation I went for the basic and seize fsmo roles to the new server. Perform Metadata clean up. Configure the DC02 as Master Domain Controller. Now everything
is set up and running but still No new user can be added or any exiting can log in
a different computer. At this point am out of answer I try everything I found in the forum. Am almost to the verge of deleting all and start
from scratch me knowing all config. Sorry for the long story am not good on resuming stuff. Please let me know If I need to add any other detail
I repeat DC01 is DEAD...
Also when a new user try to login or an existing user try to loging they get the system cannot log you on now because the domain is not available

Not Sure if this is the info requested but I ran the commands
Microsoft Windows [Version 5.2.3790]
(C) Copyright 1985-2003 Microsoft Corp.
C:\Documents and Settings\administrator.LUTHERAN>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : dc02
Primary Dns Suffix . . . . . . . : Lutheran.local
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : Lutheran.local
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom BCM5708C NetXtreme II GigE (NDIS
VBD Client) #45
Physical Address. . . . . . . . . : 00-1C-23-BF-E6-69
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.100.6
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.100.1
DNS Servers . . . . . . . . . . . : 192.168.100.6
Primary WINS Server . . . . . . . : 192.168.100.6
C:\Documents and Settings\administrator.LUTHERAN>
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #48
Owner of the binding path : WINS Client(TCP/IP) Protocol
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndiswanip
Upper Component: Internet Protocol (TCP/IP)
Lower Component: WAN Miniport (IP)
Component Name : Internet Protocol (TCP/IP)
Bind Name: Tcpip
Binding Paths:
Owner of the binding path : Internet Protocol (TCP/IP)
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #45
Owner of the binding path : Internet Protocol (TCP/IP)
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #48
Owner of the binding path : Internet Protocol (TCP/IP)
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: ndiswanip
Upper Component: Internet Protocol (TCP/IP)
Lower Component: WAN Miniport (IP)
Component Name : Client for Microsoft Networks
Bind Name: LanmanWorkstation
Binding Paths:
Owner of the binding path : Client for Microsoft Networks
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios_smb
Upper Component: Client for Microsoft Networks
Lower Component: Message-oriented TCP/IP Protocol (SMB session)
Owner of the binding path : Client for Microsoft Networks
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: Client for Microsoft Networks
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #45
Owner of the binding path : Client for Microsoft Networks
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: Client for Microsoft Networks
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #48
Owner of the binding path : Client for Microsoft Networks
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: Client for Microsoft Networks
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndiswanip
Upper Component: Internet Protocol (TCP/IP)
Lower Component: WAN Miniport (IP)
Component Name : WebClient
Bind Name: WebClient
Binding Paths:
Component Name : DHCP Server
Bind Name: DHCPServer
Binding Paths:
Component Name : Wireless Configuration
Bind Name: wzcsvc
Binding Paths:
Component Name : Network Load Balancing
Bind Name: Wlbs
Binding Paths:
Owner of the binding path : Network Load Balancing
Binding Enabled: No
Interfaces of the binding path:
-Interface Name: ndis5
Upper Component: Network Load Balancing
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #45
Owner of the binding path : Network Load Balancing
Binding Enabled: No
Interfaces of the binding path:
-Interface Name: ndis5
Upper Component: Network Load Balancing
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #48
Component Name : Steelhead
Bind Name: RemoteAccess
Binding Paths:
Component Name : Dial-Up Server
Bind Name: msrassrv
Binding Paths:
Component Name : Remote Access Connection Manager
Bind Name: RasMan
Binding Paths:
Component Name : Dial-Up Client
Bind Name: msrascli
Binding Paths:
Component Name : File and Printer Sharing for Microsoft Networks
Bind Name: LanmanServer
Binding Paths:
Owner of the binding path : File and Printer Sharing for Microsoft Netwo
rks
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios_smb
Upper Component: File and Printer Sharing for Microsoft Networks
Lower Component: Message-oriented TCP/IP Protocol (SMB session)
Owner of the binding path : File and Printer Sharing for Microsoft Netwo
rks
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: File and Printer Sharing for Microsoft Networks
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #45
Owner of the binding path : File and Printer Sharing for Microsoft Netwo
rks
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: File and Printer Sharing for Microsoft Networks
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #48
Owner of the binding path : File and Printer Sharing for Microsoft Netwo
rks
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: File and Printer Sharing for Microsoft Networks
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndiswanip
Upper Component: Internet Protocol (TCP/IP)
Lower Component: WAN Miniport (IP)
Component Name : Generic Packet Classifier
Bind Name: Gpc
Binding Paths:
Component Name : Application Layer Gateway
Bind Name: ALG
Binding Paths:
Component Name : NetBIOS Interface
Bind Name: NetBIOS
Binding Paths:
Owner of the binding path : NetBIOS Interface
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: NetBIOS Interface
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #45
Owner of the binding path : NetBIOS Interface
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: NetBIOS Interface
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #48
Owner of the binding path : NetBIOS Interface
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: NetBIOS Interface
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndiswanip
Upper Component: Internet Protocol (TCP/IP)
Lower Component: WAN Miniport (IP)
Component Name : WAN Miniport (IP)
Bind Name: NdisWanIp
Binding Paths:
Component Name : Direct Parallel
Bind Name: {A4DC6983-452B-41F9-B696-5112E5E6F1C6}
Binding Paths:
Component Name : WAN Miniport (PPPOE)
Bind Name: {5B69EEC5-2676-460B-9E03-F38B02BA4474}
Binding Paths:
Component Name : WAN Miniport (PPTP)
Bind Name: {DEE98315-C28A-4CC8-9233-E6C3506C16D3}
Binding Paths:
Component Name : WAN Miniport (L2TP)
Bind Name: {9BFC4E35-93B2-4811-8A56-69149ED0837E}
Binding Paths:
Component Name : RAS Async Adapter
Bind Name: {50239872-7742-4BB5-A28E-0B814085C2A6}
Binding Paths:
Component Name : Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Client) #48
Bind Name: {19218099-5DDC-4936-A111-75E4D7250A24}
Binding Paths:
Component Name : Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Client) #45
Bind Name: {52BE526E-7FAE-4458-9691-E333DA333601}
Binding Paths:
WAN configuration test . . . . . . : Skipped
No active remote access connections.
Modem diagnostics test . . . . . . : Passed
IP Security test . . . . . . . . . : Skipped
Note: run "netsh ipsec dynamic show /?" for more detailed information
The command completed successfully
C:\Documents and Settings\administrator.LUTHERAN>

Windows Server 2003 and Microsoft Assessment and Planning tool (MAP)

Preparing for the end of support for Windows Server 2003 (4/2015) and the need to migrate from Windows Server 2003, I have been directed on several sites run the Microsoft Assessment
and Planning tool (MAP) to aid in identifying any software and hardware issues. Apparently this tool has been recently updated (7/2014) and cannot be installed on a Windows Server 2003 system. As it requires .NET Framework 4.5 to run. Unfortunately,
.NET Framework 4.5 cannot be installed on a Windows Server 2003 as it only supports .NET 4.0.x versions. All older version links to the MAP tool have been updated to link directly to version 9.1. Where can I get a MAP tool version that will run
on Windows Server 2003?

Hi,
Yes, i would agree with arnavsharma
After the environment scan has been completed in Windows Server 2008r2 or another supported OS, MAP looks at computers running earlier versions of Windows.
http://technet.microsoft.com/en-us/magazine/ee677580.aspx
Meanwhile, for the MAP related issue, you'd better ask in MAP forums:
https://social.technet.microsoft.com/Forums/en-US/home?forum=map
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Cold fusion 8 and Windows Server 2003 Administrator Login

I cannot seem to login to my coldfusion (trial version)
administrator login after installed successfully on my Windows
Server 2003 with Web Edition Service Pack 2.
It tries to go here which is correct
http://127.0.0.1/CFIDE/administrator/index.cfm
But I get
Bad Request (Invalid Hostname)
I attempted to go through IIS through default Web Sites and
browsed over to
http://192.168.10.19/CFIDE/administrator/index.cfm
and I now get a "The page cannot be found" display message.
Is there anything special I need to do, perhaps in Web
Service Extentions in IIS or something since I don't see
"Coldfusion" mentioned anywhere, and I can't seem to find any clear
instructions on the Adobe site.
Please help, thanks.

You should
configure
IIS for Coldfusion. Pay particular attention to the section "To
verify your IIS configuration".

Windows Server 2003 Loading Problem

Hi Owais,Thanks again discuss with me. No problem this is a routine problem. Kindly follow these steps for resolving problem. 1- Start the computer by using the Windows 2003 CD. At the “Welcome to Setup” screen, press R to repair, and then press C to start the Recovery Console. 2- Type the number for the appropriate Windows installation, and then type the Administrator account password. 3- To copy the SYSTEM file from the WINDOWS\Repair folder to the WINDOWS\System32\Config folder, type the following command, and then press ENTER: 4- copy c:\winnt\repair\system c:\winnt\system32\config\SYSTEM 5- If you receive a prompt to overwrite the file, press Y, and then press ENTER. (You can also copy all the files one by one, as console doesn’t allow you to use * wild card ) 6- Restart the computer.And you will see your windows booting normally....

Hi, Guys,
Can you help me, my windows server 2003 cannot start due to one file is missing and corrupt. Message detail is mentioned below.
Windows 2003 could not start because the following file is missing or corrupt:
\winnt\system32\config\system
Regards:
Muhammad Owais.
This topic first appeared in the Spiceworks Community

SAPSPRINT with window server 2003 SP1

Dear all,
Currently we are using Window server 2003 with no SP(service pack) installed. But to install barcode.dll, we need the SP1 to be installed before we can proceed to install.
I would like to know what is the impact to the sapsprint if we install the window server 2003 SP1?
Regards,
Jerry Chiang

I had confirmed with the SAP consultant and the result show is working fine so far

Need info for installation of SAP XI on Windows server 2003

Hi All,
I need system requirement ( hardware and software) for the installation of SAP XI 3.0 only on Windows server 2003.
It would be great if anyone can share the installation steps.
Thanks in Advance...
Regards
Venkatesh

Hi venkatesh,
Plesae go through these links.
Procedure to install :
http://help.sap.com/bp_bpmv130/Documentation/Installation/XI30InstallGuide.pdf
Configuration Guide
http://help.sap.com/bp_bpmv130/Documentation/Installation/Configuration_Guide_FP.pdf
A Beginner?s Guide to SAP XI Settings, Part I
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
Guide to SAP XI Settings, Part II
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6bd6f69a-0701-0010-a88b-adbb6ee89b34
General Configuration Steps
http://help.sap.com/saphelp_nw04/helpdata/en/cf/230240d981e469e10000000a155106/content.htm
SAP Exchange Infrastructure (XI) : Installation & CONFIGURATION GUIDE
http://help.sap.com/saphelp_nw04/helpdata/en/d7/f01a403233dd5fe10000000a155106/frameset.htm
Personal Settings
http://help.sap.com/saphelp_erp2004/helpdata/en/e9/c4cc9b03a422428603643ad3e8a5aa/content.htm
Roles and Tool Access : Administration, Technical Configuration,Design,Configuration,Monitoring
http://help.sap.com/saphelp_nw04/helpdata/en/89/05793c05f0807be10000000a11405a/content.htm
http://www.forumtopics.com/busobj/viewtopic.php?t=59586&start=15&postdays=0&postorder=asc
SLD:
How To?Handle the SLD for SAP XI
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
How To?Handle Caches in SAP XI 3.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290
Refer these post installation links
http://help.sap.com/saphelp_nw70/helpdata/en/a0/40084136b5f423e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
Link for posnt installation guide
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
https://websmp101.sap-ag.de/~sapidb/011000358700009389172004E.PDF
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
2004s PI installation - help.sap.com:
http://help.sap.com/saphelp_nw04s/helpdata/en/78/f59442062bcd6ae10000000a155106/frameset.htm

We have non admin users on Windows 7. They change the homepage and it works for that session. When they close the browser, and restart it again the default homepage is shown.

Windows 7 Sp3. Using Firefox 7.01
Non admin users.
Can change homepage to whatever they like and it will work.
BUT when they close firefox and open it again the home page goes back to default setting

Update.
This looks to be a mozilla.cfg setting. If I take out the pref("browser.startup.homepage","ourwebpage");
it loads the basic firefox "FirstPage"
How do I get around adding a default homepage that can be changed by the user?
I have tried adding
defaultPref.. .. then the webpage info.. BUT it retrurns a Failed to read the configuration file. Please contact your system administrator.
Do I need to create a prefs.js file?
And if I do how do I get it to work for each new user that logs into that machine?

(Windows Server 2003) Cannot run SQLSERVERAGENT service under non admin user after SP1 Installation

Similar Messages

Maybe you are looking for