Windows Server 2003 Question

Hello, I have an applet that I'm trying to show on my web page. The problem lies from within Server 2003. From there, when you view the page, you must minimize the browser to see the applet, however, if you view the applet from outside the server, it works fine. Any suggestions on what my be causing this?

Chris,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

  • Is there a firefox or best browser (except IE) for Windows Server 2003 R2 Standard? if so, is it free of charge (open source) forever? where can I get it? details. need answers to all questions

    is there a firefox or best browser (except IE) for Windows Server 2003 R2 Standard? if so, is it free of charge (open source) forever? where can I get it? details. need answers to all questions

    # As to what is the best browser, it is subjective. I think it is the best, others will disagree. There is no special version for Windows Server 2003, the usual version works on it.
    # It is free of charge and will always be free.
    # It is open source.
    # You can get it from http://www.mozilla.com

  • Question about locking down IIS on an SCCM 2012 distribution point on a Windows Server 2003

    Hello. My environment is SCCM 2012 SP1. I will be setting up several distribution points on Windows Server 2003 machines. This summer I have a project to configure SCCM to use our PKI infrastructure. Unfortunately, this will not be in place before I need
    to set the Windows Server 2003 machines up as distribution points. I am not an IIS expert. When I set the DPs up, I am only 1)Installing IIS, 2)Enabling BITS extensions, and 3)Enabling WebDav. Is there anything I should do to ensure they are as secured as
    possible?

    I would say that installing Windows Server 2003 is not "as secure as possible" due to it's end of support coming soon.
    http://support.microsoft.com/lifecycle/default.aspx?LN=en-us&p1=3198&x=10&y=12
    And I would say that we need more information about your scenario to tell you how it is as secure "as possible". Since that would be shutoff at the bottom of the ocean. But that wouldn't be that useful server.
    Im guessing that you will run these servers for internal
    clients ONLY. And that you have a decent edge protection as well as physical protection. Then I would start by having the lastest secrutiy patches, running antivirus software and having the firewall turned ON. I would make sure that
    only necessary logons would be possible and that the servers wouldn't cache any credentials. Typically a DP NEVER holds sensitive data so no real need to secure them more than that in a normal scenario if you ask me.
    A final notice, this is a baseline
    for a common scenario. You would need to scale and change that
    in order to apply for your scenario.
    Tim Nilimaa | Blog: http://infoworks.tv | Twitter: @timnilimaa

  • Add-on installation problem in Windows Server 2003

    Hi guys,
    I have a problem when i want to install my add-on in the Windows Server 2003. The server gives me error :
    Unable to load AddOnInstallAPI.dll
    and when i try install using the same installer at the client station, everything is ok.
    Does anybody have suggestion about that problem? I suspect the problem is the Windows' security that did not allowed me to load the .dll. Does anybody know how to set the security?
    Thanks you,
    Harianto Ng

    I've found an answer on the similar question here, on the forum, saying that Windows 2003 is not a supported SAPBO Client OS.
    In my experience I could not even set a reference to SAPbouicom.exe with a message "cannot load DLL"...
    Natalya

  • Access windows server 2003 from a local user machine (windows 7 pro)?

    Is there a way to look up user accounts from a local machine running windows 7 pro without having to always go to the physical server itself?
    The reason is the location of the server, a bit of an inconvenience.
    It's a windows server 2003 btw.
    Thank you,
    Cris

    Hi,
    Thank you for posting in Windows Server Forum.
    Good to hear that you go it working.
    In respect to your another question, it seems that you want to have with smart card technique for password without entering manual credential. Please check following article for information.
    Smart Card and Remote Desktop Services
    http://technet.microsoft.com/en-us/library/ff404286(v=WS.10).aspx
    Guidelines for enabling smart card logon with third-party certification authorities
    http://support.microsoft.com/kb/281245
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support

  • Access Denied to report file on Windows Server 2003 Enterprise

    Hi,
    I have a deployment problem for which I am out of ideas. I have an ASP.NET web site deployed on a server running Windows Server 2003 R2, sp2.  It makes extensive use of Crystal Reports, including both displaying them and e-mailing them to specified recipients as PDF files. It all works great.
    Now I need to port the web site to a different server, running Windows Server 2003 Enterprise, sp1. The reports display fine as long as I am not trying to convert it to PDF for e-mailng. When it gets to the following line in my code:
    MemoryStream memStream = (MemoryStream)rptDoc.ExportToStream(ExportFormatType.PortableDocFormat);
    It reports the following error:
    Access denied.Error in File JobDetails {DC64A5D3-9DD7-4E4C-90F5-A08731409B29}.rpt:
    Access to report file denied. Another program may be using it.
    I finally got it to work by granting Modify permission to Everyone for the c:\Windows\Temp folder. Obviously this is not a good practice.  Granting Full Control  to the IUSR_servername account did not solve the problem on Windows Server Enterprise, although it did the trick on R2.
    So the question is, which account needs which permission to the Temp folder to enable the PDF to get written?
    Thanks.
    Dan

    What ever account the app is running under will need read / write permissions on the temp folder. Your working server should be a good place to look to see how the premissions were set there. The same will apply to any other server(?).
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup
    Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

  • Integration - Windows Server 2003/2008R2: Creating a login script that attaches programs to a certain user group. Upgrading to Windows 7/8

    We are currently running a windows server 2003 environment with a 2003 server being the DC. We have a couple of 2008 r2 servers that are member servers.
    OK...
    Our users are primarily operating off of windows xp clients/workstations in which they use RDP to connect to the newer member servers that are windows 2008. With their base profile in xp I am using roaming profiles via server 2003. I am looking to begin
    upgrading all of the workstations to all-in-one windows7/8 boxes partially because of cosmetic reasons(#weird) and partially because we will eventually begin using the camera options that are in the all-in-one's.
    Also..I must do this one at a time as we don't have the money to do a complete overhaul of all client workstations..If that was the case, I could just redo the network and make those members servers the DC and backup DC as well as add a virtual server
    in which everyone can access those legacy programs that are still needed...
    As you guys know windows 7/8 boxes will not work with server 2003 and roaming profiles. The reason we don't completely upgrade to 2008 r2 environment is because we are still holding on to a legacy program that requires server 2003 and these programs are
    vital to our operation.
    So..broken down even further...
    A: User is part of a 'LocalAdmins' group that makes them automatically a local admin upon any system within our domain.
    B: User  logs in to windows xp with credentials in which a tailored made per user roaming profile comes up from server 2003
    C: User then logs into one of the two terminal servers via RDP with same credentials and accesses new primary application. To access the legacy applications, they merely minimize their RDP session to get back to the windows xp session.
    Ultimately..
    1. I'd like to begin replacing option B: with windows 7/8 all-in-ones and and have the RDP saved sessions,that talk to the 2008 member servers, as well as, a few vital ie shortcuts automatically come to all users that are apart of that "LocalAdmins
    group period.
    2. Setup 1 server 2003 box that runs that legacy program and allow everyone access via a Virtual Environment..
    3. If they log into a windows xp box, or a windows 7/8 box, I want them to have access to the same icons.
    I guess this is a lot to digest, but my question is, what script could I make that would essentially allow uniformity for both my xp workstations and newly added windows 7/8 boxes? What script could I create that would,I guess reside on server 2003, that
    brings all the neccessary icons to the users that are apart of that "LocalAdmins" group despite having a windows xp, 7, or 8 workstation?

    " I don't see what the issue is because a logon script will still be managed by Group Policy and will have to be applied using GP rules.  In the end you still have to write the script."
    You basically contradicted the smug part of your rant and multiple answers with this statement!!! You just recognized that some sort of script would be necessary if I chose to use it via group policy. 
    But according to you..
    "It is not and has never been done via a script."
    Clearly it has a section per user for a "profile path" and a "logon SCRIPT". Which warrants my creation of this post since I have currentely implemented
    roaming profiles. That is how I am manipulating what users can have on their desktop because of course, we have different users that have different needs. But out of all the users, there are programs that need to be laced and seen upon immediate login.I
    will consult other people as this is only preliminary planning but about half of your statements are completely unwarranted and UNNECESSARY!
    This statement also proves your additional inaccuracies...
    "All of the profile things are handled by Windows and have nothing to do with scripts.  You define all of that in Group Policy."
    That's just silly talk. I told you in my initial break down of my scenario in an entirety that I am using "tailored made per user roaming profiles" to control desktop environments not group policies in this case. But you just made an absolute statement in
    saying "You define all of that in Group policy" which is completely wrong...
    Do me a favor, please don't respond to this post anymore. I'd love to see if any other partner, staff or whatever mind responding. Thank you for your help anyway. I will use what is useful in your post and discard the rest.
    Thanks

  • Connect SQL Server 2012 from Windows Server 2003 with native client 9.0

    Hi,
    I currently have a setup where ETL tool Ab Intio, running on a Linux server, connects to the SQL Server 2005 through a passthrough Wintel server with Windows Server 2003 OS using SQL server native client 9.0
    Now I have the requirement to upgrade the SQL server from 2005 to 2012.
    My question is, will it be possible to connect to SQL server 2012 through Windows Server 2003 with native client 9.0?
    As per the specs, I need native client 11.0+ to fully support SQL Server 2012, but then, as per specs, native client 11.0 doesnot run on Windows server 2003. OS upgradation is currently not on the cards.
    So will it be possible to the run the basic queries we use currently, if we can connect SQL server 2012 through Windows Server 2003 with native client 9.0/10.0, without updgrading the OS of the Wintel server?
    Thanking you in advance! 

    Hi Soumya,
    Yes, you can use the SQL Server Native Client shipped with SQL Server 2005 to connect to a SQL Server 2012 instance, and there is no need to upgrade the operating system.
    Regards,
    Mike Yin
    TechNet Community Support

  • How to install windows server 2003 on Sunfire x4150?

    hi, i'm very new to Sun server.Sorry if i dont know anything about it. But now i have to install Windows Server 2003 on this Sunfire x4150 server. How can i do that? I've try to install but it give me error about the driver.
    Some question:
    1. Can i install both Sun Os (Solaris?) and Windows Server together? If cant, can i format the Solaris OS and install a fresh Windows?
    2. OR actually i should install inside a Virtual Machine?
    Here are some links that i found. Am i following the right direction? The article suggest me to download FloppyPack from Sun's website. So, should i just downlaod the FloppyPack (360+KB) ? I dont need to download other driver package?
    http://www.seedsofgenius.com/pdf/wp1.pdf
    http://dlc.sun.com/pdf/820-5837-10/820-5837-10.pdf
    Sorry, i have totally no idea at all.
    Thank you very much if you can help me . OTL

    Might be a bit late for you, but if this helps anyone else, good.
    I had the same issue with an X4600 lately. You need to download the Sun Installation Assistant cd and boot from it to install anything other than Solaris. This cd is similar to the ones that Compaq andDell sendout with their servers. It will do a semi automatic install after you give it the information about the os, set up disks, etc.
    Easy to do, search the sun support site for the SIA image particular to your hardware.

  • Acrobat 9 pro support windows server 2003 32bit?

    in the acrobat 9 pro readme file,I see the system requiement:
    Windows Server® 2003 (with Service Pack 2 for 64-bit);
    my question is that does acrobat 9 pro support windows server 2003 32 bit?
    I have install it at windows server 2003 32bit,
    but when i open it, a message box
    "Licensing for this product has stopped working"
    i have try the solution in kb405970, and can not resolve it.
    so manybe really it doesn't support windows server 2003 32 bit?

    John makes some very good points but I would like to clarify one thing from his post: you are planning three migrations:
    1. From 32bit -> 64bit
    2. From Windows to Linux
    3. From Oracle 10gR2 to 11gR2
    The second of these is the one most liekly to give you grief. You certainly should not attempt to combine it with a database upgrade. Either move the database to RHEL and then upgrade it, or upgrade it on Windows and then move it to the new server.
    Of these, the first is the least controversial. So it's a nice point whether it is worth upgrading from Windows 32bit to Windows 64bit prior to moving to Linux.
    Cheers, APC

  • 64 bit Java 1.5 on  Windows Server 2003 64bit?

    I have search the Sun website, Google etc but I am unable to find a definitive statement as to whether Java 1.5.0 has support for 64 bit processing when run on on Windows Server 2003 64bit?
    There appears to be separate 64 bit versions available for down load on the Solaris platform but not on Windows Server 2003 64bit. Is there for a reason for this?
    If some one could clarify the situation it would be greatly appreciated.
    Regards Mike Kimber

    Actually I didn't and it?s the reason I asked the initial question. I found the table unclear. However the following footnote does suggest that 64 bit processing is supported natively on Windows Server 2003:
    3. Support for AMD64/EM64T 64-bit mode Windows introduced in J2SE 5.0 Update 2.
    Prior to Update 2, J2SE 5.0 supports AMD Opteron (64) Windows in this configuration.
    Whilst not categorically stating it, this would suggest that as of Java 5 Update 2, java supports 64 bit processing on 64 bit Intel chips?
    Regards Mike Kimber

  • How to install Oracle 9i (9.2.0.2) in Windows Server 2003 x64 - Intel Xeon

    I have tried to install Oracle 9i (9.2.0.2) in Windows Server 2003 x64 Enterprise Edition with Intel Xeon (EM64T) processors.
    When I run setup.exe I get an error: "The image file C:\Documents and settings\administrator.SERVERNAME\my documents\92021 win64_disk1\setup.exe is valid, but is for a machine type other than the current machine".
    I have to install Oracle 9i in that server but I can't run the installation. Is there a way to solve this problem, is there a patch that can solve this? Anyone know something about this problem?
    Thanks a lot!!!
    I'm desperated!!

    Hi,
    reply to my own question:
    In the docs provided with the downloads for Oracle Database Server 9i x64, I found that this version requires either
    - Windows Server 2003 Datacenter Edition for 64-Bit Itanium 2 Systems
    or
    - Windows Server 2003 Enterprise Edition for 64-Bit Itanium 2 Systems
    So I guess, the only X64 platform being supported under Windows Server 2003 (both Datacenter / Enterprise Editions) is Itanium CPUs ...
    ... though this is not (!!!) clearly stated in the download link (other/newer versions are listed more precisely - I guess it's a matter of an old link: no Intel Xeon / AMD Opterons were available (???) when Oracle 9i database server was published).
    So I'll give it a try with 10g database server ;-)))
    Regards,
    Thomas Heß

  • Tuxedo Memory Leak Issue (Tuxedo 8.1 - Windows Server 2003)

    Hi
    We are running tuxedo 8.1, 32 bit with patch level 258 in our windows server 2003 based production environment. We are currently facing an issue where the memory usage of machine slowly keeps on going higher and higher eventually resulting in “Memory Allocation Failure” to tuxedo servers. We then have to do a complete restart of tuxedo which stabilizes the system for other few days.
    We have been analyzing the our source code in development/test environment using different tools like a customized Alzheimer tool and IBM purify but both tools reported no memory leaks. We then developed a test tuxedo server exposing a tuxedo service which simply allocates a memory to a response buffer and then returns the response buffer. I then configured tuxedo queue with same name “MEMTEST3” and configured a TMQForward server to call this “MEMTEST3” service every time a message is en-queued to the MEMTEST3 queue.
    unsigned long _LIBENTRY ulTPAlloc(FBFR32 **ppc, long size)
    unsigned long ulRes = MSG_SUCCESS_c;
    ppc = (FBFR32 ) tpalloc("FML32", (char *) 0, size);
    if (*ppc == (FBFR32 *) 0) {
    vLogMessage(hGetLogHandle(), MSG_MEM_ALLOC_ERR_c, (char *) 0, (Event_t *) 0,
    BM_NOSUPPRESS_c, size);
    ulRes = MSG_MEM_ALLOC_ERR_c;
    return (ulRes);
    /*==============================================================================
    Service MEMTEST2
    ==============================================================================*/
    void MEMTEST3(TPSVCINFO *pRequest)
    FBFR32 *pFmlResponse = NULL;
    FBFR32 *pFml = NULL;
    unsigned long ulRes = MSG_SUCCESS_c;
    unsigned long ulActionCode = 0;
    int iExitValue = 0;
    long lTpurcode = 0;
    FBFR32 *pFmlNULL = NULL;
    userlog("Starting MEMTEST3 service.");
    if (pRequest == NULL || pRequest->data == NULL)
    vLogMessage(hGetLogHandle(), MSG_API_ARGS_ERR_c, NULL, NULL, BM_NOSUPPRESS_c);
    ulRes = MSG_API_ARGS_ERR_c;
    else
    pFml = (FBFR32 *) pRequest->data;
    userlog("MEMTEST3: GET THE MEM");
    ulRes = ulTPAlloc(&pFmlResponse, 1024);
    userlog("Ending MEMTEST3 service.");
    tpreturn( iExitValue, lTpurcode, ( char * ) pFmlResponse , 0L, 0L );
    While I was en-queuing the messages to the queue, I kept on monitoring the memory usage of the server hosting the service. What I observed was that I saw an initial hike in the usage of memory of the server followed by small jumps in memory increase. I kept on monitoring the server for a long time and the memory was never returned. What I suspect is that there is memory leak in tuxedo TMQforward process as it never released the memory allocated in the service.
    Can anyone help how this situation can be avoided ?
    Kind Regards,
    Asim

    Hi Todd,
    Also as well as my previous question, I also found your reply to another user posting something similar at Re: Memory leaks in Tuxedo libraries
    You mention that:
    In general Tuxedo will free anything it allocates, although there are cases where memory is allocated and not freed because:
    +1) it is one time or a fixed number of times allocations that will not continue to grow, and freeing up the memory just before exiting isn't of any benefit.+
    +2) the memory is under Tuxedo's memory management functions where we manage our own look aside lists to provide better buffer allocation performance and again freeing these before process termination is of little benefit.+
    Our code does only issue TPALLOC once and then a TPRETURN - could point (1) of your comment above also be something of concern to us, where we would observe a continuous growth of memory usage?
    I know it may sound like a stupid question but do we need to run our code 20,000 times before memory gets freed?
    Kind Regards,
    Asim

  • Failed Windows Server 2003 Enterprise SP2 to Windows 2008 Enterprise OS Upgrade

    Attempted to upgrade the OS on our Primary Domain Controller which is running Windows Server 2003 Enterprise with Service Pack 2 installed on a HP ProLiant DL360 G4P Server with 2GB of ram, 3.2 GHz Processor and 53.2 GB of free space on C.  I took
    the following steps prior to attempting upgrade.
    1. Determined that Server meet the minmum requirements for upgrade.
    2. Installed all Windows Updates.
    3. Uninstalled McAfee Virus Scan Enterprise Application
    4. Backed Up and Imaged Primary Domain Controller.
    5. Tested Domain Replication to ensure Primary and Backup Domain Controllers were communicating with each other.
    6. Set Domain Function Level at Windows Server 2003
    7. Placed ADPREP folder on C:\ on Primary Domain Controller and ran "adprep /forestprep" and "adprep /domainprep" successfully
    8. In the C:\Windowd\System32 renamed the WindowsPowerShell application folder to WindowPowerShell-Old, the application failed the Upgrade compatibility test.
    Loaded the DVD: "Windows Server 2008 for Enterprise, Standard and Datacenter 32bit Edition", ran installation in upgrade mode to preserve existing settings and software.  The Ugrade ran to last step, application install and failed at
    26% complete with the following errror message:
    "Windows installation encountered an error and cannot continue. Your computer will now restart and your previous version of windows will be restored"
    My questions are why did the upgrade fail?  What can we do to ensure the upgrade will succeed next time?
    I have incuded the Setuperr.log below.
    2014-08-24 08:48:27, Error      [0x08081e] MIG    Failed to load manifest at C:\$WINDOWS.~BT\Sources\dlmanifests\errorreportingfaults-dl.man: class UnBCL::XmlException:  hResult = 0x0, Line = 2, Position = 134;
    void __thiscall UnBCL::XmlDocument::Load(class UnBCL::String *)
    2014-08-24 08:48:30, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:48:30, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:48:30, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:48:35, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:48:35, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:48:35, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:48:35, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:48:35, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:48:35, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:48:35, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:48:35, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:48:35, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:48:58, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:48:58, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:48:58, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:48:58, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:48:58, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:48:58, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:48:58, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:48:58, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:48:58, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:48:58, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:48:58, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:48:58, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:48:59, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:48:59, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:48:59, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:48:59, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:48:59, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:48:59, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:48:59, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:48:59, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:48:59, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:48:59, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:48:59, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:48:59, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:49:09, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:49:09, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:49:09, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:49:09, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:49:09, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:49:09, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:49:09, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:49:09, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:49:18, Error      [0x08071d] MIG    CDownlevelOCStore::GetOCCollection, Failed to load C:\$WINDOWS.~BT\Sources\dlmanifests\errorreportingfaults-dl.man.: class UnBCL::XmlException:  hResult = 0x0, Line
    = 2, Position = 134; . .
    void __thiscall UnBCL::XmlDocument::Load(class UnBCL::String *)
    2014-08-24 08:49:22, Error      [0x08081e] MIG    Failed to load manifest at C:\$WINDOWS.~BT\Sources\dlmanifests\errorreportingfaults-dl.man: class UnBCL::XmlException:  hResult = 0x0, Line = 2, Position = 134;
    void __thiscall UnBCL::XmlDocument::Load(class UnBCL::String *)
    2014-08-24 09:13:05, Error      [0x080792] MIG    COCEventTracing::COCEventTracing Failed to call StartTrace 87.[gle=0x00000057]
    2014-08-24 09:14:26, Error      [0x0802b6] MIG    Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\AutoEnrollment [EventMessageFile]. Exception class Mig::Win32ErrorException: Win32ErrorException:
    Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\AutoEnrollment [EventMessageFile]], which is protected by WRP..
    void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
    2014-08-24 09:14:26, Error      [0x0802b6] MIG    Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\AutoEnrollment [TypesSupported]. Exception class Mig::Win32ErrorException: Win32ErrorException:
    Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\AutoEnrollment [TypesSupported]], which is protected by WRP..
    void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
    2014-08-24 09:14:27, Error      [0x0802b6] MIG    Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\Tlntsvr [EventMessageFile]. Exception class Mig::Win32ErrorException: Win32ErrorException:
    Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\Tlntsvr [EventMessageFile]], which is protected by WRP..
    void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
    2014-08-24 09:14:27, Error      [0x0802b6] MIG    Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\DfsSvc [EventMessageFile]. Exception class Mig::Win32ErrorException: Win32ErrorException:
    Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\DfsSvc [EventMessageFile]], which is protected by WRP..
    void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
    2014-08-24 09:14:27, Error      [0x0802b6] MIG    Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\DfsSvc [TypesSupported]. Exception class Mig::Win32ErrorException: Win32ErrorException:
    Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\DfsSvc [TypesSupported]], which is protected by WRP..
    void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
    2014-08-24 09:14:27, Error      [0x0802b6] MIG    Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\SCardSvr [EventMessageFile]. Exception class Mig::Win32ErrorException: Win32ErrorException:
    Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\SCardSvr [EventMessageFile]], which is protected by WRP..
    void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
    2014-08-24 09:14:27, Error      [0x0802b6] MIG    Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\SCardSvr [TypesSupported]. Exception class Mig::Win32ErrorException: Win32ErrorException:
    Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\SCardSvr [TypesSupported]], which is protected by WRP..
    void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
    2014-08-24 09:30:13, Error      [0x060005] IBS    CallBack_StampRequiredDrives:An error occurred while fixing paths on black board GLE is [0x0]
    2014-08-24 09:30:13, Error      [0x064188] IBSLIB RollbackReinitialize: threw exception.: class UnBCL::ArgumentException: Directory "X:\$WINDOWS.~BT\Sources\Rollback" doesn't exists..
    __thiscall OSRollbackService::CCheckpointImpressario::CCheckpointImpressario(const unsigned short *,class OSRollbackService::CCheckpointSequence *,int)
    [gle=0x00000003]
    2014-08-24 09:33:19, Error      [0x0804b3] MIG    CMigWorkingDirHelper::CMigWorkingDirHelper() failed.: class UnBCL::DirectoryNotFoundException: root of directory to create not found.
    class UnBCL::DirectoryInfo *__stdcall UnBCL::Directory::CreateDir(const class UnBCL::String *)
    [gle=0x00000003]
    2014-08-24 09:33:19, Error      [0x0802fa] MIG    MigStartUp caught exception: class UnBCL::DirectoryNotFoundException: root of directory to create not found.
    __thiscall Mig::CMigWorkingDirHelper::CMigWorkingDirHelper(class UnBCL::String *)
    __thiscall Mig::CMigWorkingDirHelper::CMigWorkingDirHelper(class UnBCL::String *)
    class UnBCL::DirectoryInfo *__stdcall UnBCL::Directory::CreateDir(const class UnBCL::String *)
    [gle=0x00000003]

    Hi,
    Here are some limitation of upgrading:
    Upgrading is supported from x86-based and x64-based computers, but cross-architecture upgrades are not supported. 
    Cross-language upgrades are not supported.
    Upgrading from Windows Server 2003 to a Server Core installation of Windows Server 2008 is not supported.
    We cannot upgrade the failover clusters from Windows Server 2003 to Windows Server 2008. Before upgrading, we must uninstall failover clustering.
    For detailed information about Upgrading to Windows Server 2008, please refer to the link below,
    http://technet.microsoft.com/en-us/library/cc755199(v=WS.10).aspx#BKMK_Supported
    Besides, to confirm that it isn't an IO issue, could you please try to copy the DVD to the local disk?
    If error occurs, it may be an IO issue.
    Best Regards.
    Steven Lee
    TechNet Community Support

  • Issues when Sharepoint Services 3.0 OS upgraded from windows server 2003 standard to windows server 2003 enterprise

    In my sharepoint 2007, I have upgraded the OS from windows server 2003 standard to windows server 2003 enterprise R2 SP2. After the OS upgrade when I run the central admin it's showing this error "Microsoft Windows Sharepoint Services 3.0 Error 2908
    error has occurred" screen shot below of the error. 
    Any help?

    Not sure I can help.  In general MS does NOT support the upgrade of the Underlying OS without re-installing SharePoint.  Many of the prerequisites that were installed when SharePoint was installed are OS specific.  You can either contact
    Product Support and see if they can provide any assistance or re-install SharePoint from scratch and re-attach/migrate all the existing databases with content into the new system on the new OS.
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

Maybe you are looking for

  • Hyperlink in Drill-Through on BPC 7.0 M

    We used to have an hyperlink in our ECM in our drill-through requests. Before migrating to 7.0 SP3 M  from 5.1 SP1, these links worked perfectly. Now, the result in the web browser is displayed as text : 1 - The value in SQL in which the DT requests

  • Java Mapping Or Adapter Module for MultiLevel File Content Conversion ??

    Hi Experts, Hi All, As we all know file content conversion cannot parse more than three level even if we use FCC paramenters or MessageTransform Bean /StrictXmlToPlain Bean. Currently i am facing an scenario where i can expect an content coversion wi

  • Purchasing module

    Hi, Our proposal customer has a requiest for us. He wants to see somewhere in the A/P invoice the picture of his incoming invoice. It means that the paper based invoice would be scanned,and we have to attach to the A/P invoice. It is possible, with S

  • How do I send out and email so I can receive confirmation email has been received?

    How do I send out an email, so that I can recieve confirmation that email was delivered?

  • HP (USB) Headset not working

    I got a new headset today and when i plugged it in it worked but it all of a sudden stopped working and now my laptop wont even register the product being plugged into the USB ports.  any suggestions?