Windows Server 2003 R2 32bit keeps unexpectedly rebooting - System Stop Failure

Good morning all,
I am currently having a very difficult time with my servers running Windows Server 2003 R2 32Bit SP2. I have had this server running over night last night and to come in this morning to find it has rebooted 4 times due to unexpected reboots. I have applied
the latest hotfix to this server but nothing has worked. This is a unknown server as its my companys branded. its got a 13 slot PCI backplane with a processor card running a i7 2600K with 4GB RAM. The processor card is called a ROBO-8780. I have got 5 HDD's
first 2 is RAID 1 which hold the OS and last 3 is RAID 5 which holds the data.
I am getting loads of different problems aswell on different servers where on a freshly build OS of Windows Server 2003 R2 32Bit SP2, its rebooting on the Windows splash screen, can sometimes get into safe mode but very rarely.
If you need any more information, please let me know, any help is appreciated!
Thanks

Hi,
Could you offer us the system log record information,Please do the following action then monitor again.
1. Run Windows Update and make sure you have the latest patches and service packs installed
2. Check so your server have the latest drivers installed from the manufacturer homepage. If not, please update your drivers, firmware and BIOS
3. Uninstall any Antivirus.
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Windows Server 2003 (sp2 - 32bit) - OEM problem

I inherited this in-house (closed) system a few years ago and have not had a problem until a couple of months ago. It has been running for about 1 1/2 years.
Desc:   Oracle 11.1.0.6 (64bit) on Windows Server 2003 (sp2 - 32 bit)   [[ yes, I know, what the heck is a 64 bit Oracle running on a 32 bit windows?]]
     2 - instances running - one production with associated ASM, one RMAN cat with no ASM - all folders are backed up to a large SANS.
          - each instance has its own listener
          - each instance has its own dbconsole service
Problem:
1. a couple of months ago, when I attempted to access the production OEM, I started seeing
service-specific error 1 (0x1), NET HELPMSG 3547
     -- the first time this happened, I immediately opened the OEM for rman and it was successful
          It was also fortunate in that we were doing some power upgrades and all of our systems were shutdown - and after this system was powered on, the production OEM worked fine.
     -- a few weeks later, the prod OEM was not accessible - giving the same 3547 error. We were not able to shut down, so I stopped the Windows services for this instance, and stopped
               the windows listener services for both instances. I then started only the production windows services, and was able to use the prod OEM. Then I started the listener service for
               the rman and all was well.
     -- this Monday (today is Thurs), the prod OEM was inaccessible again and I tried the stopping and restarting of the services and started seeing 7024 errors. I tested the rman OEM and
          it was fine. I stopped both instances via sqlplus commands, used emctl to stop both dbconsoles (of course, the prod one was already not running), shut down the ASM instance and
          then stopped all the Windows services. then I only brought up the prod services and confirmed with sqlplus commands that everything was started - but the final service, dbconsole
          would not start. This morning I was able to reboot the server (after shutting down all the Oracle services) and now I can access the prod and the rman OEMs.
2. What the heck?   Because I can get the prod OEM working with just a reboot, I don't know if I should have to rebuild dbconsole.   And since I'm the only one disuncombullated because
          of the prod OEM, it is not a fall-down-crying situation - I'm actually a sqlplus kinda guy, but when I'm just doing visual maintenance, it is nice to view OEM remotely for a quick check.
3. I've been working with Linux systems and Oracle for many years and I've never experienced this kind of problem.   Oh, and since it is a closed system, it will be when pigs sprout wings
               and start flyng that I'll be allowed to install patches - but again, if a reboot 'fixes' this issue, what the heck? Oh, finally, I don't believe in the common windows fix of rebooting - I'd
               like to find out WHY this is happening and literally fix it.
ANYBODY have a clue?   Not me...
Thanks for your time.

user12183171 wrote:
I inherited this in-house (closed) system a few years ago and have not had a problem until a couple of months ago. It has been running for about 1 1/2 years.
Desc:   Oracle 11.1.0.6 (64bit) on Windows Server 2003 (sp2 - 32 bit)   [[ yes, I know, what the heck is a 64 bit Oracle running on a 32 bit windows?]]
You'd better double check that. It is fundamentally impossible for 64-bit software to run on a 32-bit OS.
     2 - instances running - one production with associated ASM, one RMAN cat with no ASM - all folders are backed up to a large SANS.
          - each instance has its own listener
One single listener, with the default name of LISTENER, using the default port of 1521, is quite capable of -- indeed, was designed to -- service multiple instances of multiple versions running from multiple homes.
          - each instance has its own dbconsole service
Problem:
1. a couple of months ago, when I attempted to access the production OEM, I started seeing
service-specific error 1 (0x1), NET HELPMSG 3547
     -- the first time this happened, I immediately opened the OEM for rman and it was successful
          It was also fortunate in that we were doing some power upgrades and all of our systems were shutdown - and after this system was powered on, the production OEM worked fine.
     -- a few weeks later, the prod OEM was not accessible - giving the same 3547 error. We were not able to shut down, so I stopped the Windows services for this instance, and stopped
               the windows listener services for both instances. I then started only the production windows services, and was able to use the prod OEM. Then I started the listener service for
               the rman and all was well.
     -- this Monday (today is Thurs), the prod OEM was inaccessible again and I tried the stopping and restarting of the services and started seeing 7024 errors. I tested the rman OEM and
          it was fine. I stopped both instances via sqlplus commands, used emctl to stop both dbconsoles (of course, the prod one was already not running), shut down the ASM instance and
          then stopped all the Windows services. then I only brought up the prod services and confirmed with sqlplus commands that everything was started - but the final service, dbconsole
          would not start. This morning I was able to reboot the server (after shutting down all the Oracle services) and now I can access the prod and the rman OEMs.
2. What the heck?   Because I can get the prod OEM working with just a reboot, I don't know if I should have to rebuild dbconsole.   And since I'm the only one disuncombullated because
          of the prod OEM, it is not a fall-down-crying situation - I'm actually a sqlplus kinda guy, but when I'm just doing visual maintenance, it is nice to view OEM remotely for a quick check.
3. I've been working with Linux systems and Oracle for many years and I've never experienced this kind of problem.   Oh, and since it is a closed system, it will be when pigs sprout wings
               and start flyng that I'll be allowed to install patches - but again, if a reboot 'fixes' this issue, what the heck? Oh, finally, I don't believe in the common windows fix of rebooting - I'd
               like to find out WHY this is happening and literally fix it.
ANYBODY have a clue?   Not me...
Thanks for your time.

Upgrade issues - 11.1.0.6 to 11.1.0.7 on Windows Server 2003 R2 32bit

Sooo...after upgrading from 11.1.0.6 to 11.1.0.7 I'm getting errors when trying to use EM and starting the database.
Database Instance is down
Host beehive
Port 1521
SID hivedb
Oracle Home C:\app\Administrator\product\11.1.0\db_1
Listener is UP
Status Up
Host beehive
Port 1521
Name LISTENER
Oracle Home C:\app\Administrator\product\11.1.0\db_1
Location C:\app\Administrator\product\11.1.0\db_1\network\admin
Agent Connection to Instance is DOWN
Status Failed
Details ORA-12505: TNS:listener does not currently know of SID given in connect descriptor (DBD ERROR: OCIServerAttach)
When I go into sqlplus and try to start the database form there, i get the following error:
SQL> startup
ORACLE instance started.
Total System Global Area 644468736 bytes
Fixed Size 1349236 bytes
Variable Size 293603724 bytes
Database Buffers 343932928 bytes
Redo Buffers 5582848 bytes
Database mounted.
ORA-01092: ORACLE instance terminated. Disconnection forced
Process ID: 336
Session ID: 170 Serial number: 5
Does anyone have any idea at all?
I have a feeling it may have something to do with tnsnames, but I'm not sure.

ORA-01092: ORACLE instance terminated. Disconnection forcedSee the alertlog for the reason behind this generic error. Did you only upgrade the software without running the upgrade script according to the README file of the patchset?
Werner

EP6.0 installation on windows server 2003

I am trying to install EP6.0 on Web AS 6.40 on a windows server 2003 machine with 447MB ram.The setup stops at phase 22 (start SAP J2EE engine). I have seen in the SAP MMC .The instance JC00 has not started fully.It is always yellow.Trying to restart it also has had no effect.Can anyone suggest what might be the problem?
Thanks

this phase take time to start the SAP J2EE engine, in my case it took almost 30 mins start engine. Just wait and watch.
Regards,
Rajesh Kokane

Acrobat 9 pro support windows server 2003 32bit?

in the acrobat 9 pro readme file,I see the system requiement:
Windows Server® 2003 (with Service Pack 2 for 64-bit);
my question is that does acrobat 9 pro support windows server 2003 32 bit?
I have install it at windows server 2003 32bit,
but when i open it, a message box
"Licensing for this product has stopped working"
i have try the solution in kb405970, and can not resolve it.
so manybe really it doesn't support windows server 2003 32 bit?

John makes some very good points but I would like to clarify one thing from his post: you are planning three migrations:
1. From 32bit -> 64bit
2. From Windows to Linux
3. From Oracle 10gR2 to 11gR2
The second of these is the one most liekly to give you grief. You certainly should not attempt to combine it with a database upgrade. Either move the database to RHEL and then upgrade it, or upgrade it on Windows and then move it to the new server.
Of these, the first is the least controversial. So it's a nice point whether it is worth upgrading from Windows 32bit to Windows 64bit prior to moving to Linux.
Cheers, APC

Migrate oracle 10.2.0.5.0 enterprise on windows server 2003 32bit to Linux

Hello,
I am trying to find any white paper regarding the benefits of migrating oracle database from windows server 2003 32bit
to RedHat linux server 64bit.
The current db version on windows is 10.2.0.5.0
The new version on linux will be 11.2.0.3.0
If anyone crossed such a white paper describing the pros & cons for such a migration..
Thanks alot.
Edited by: user7320646 on Jan 9, 2013 5:45 AM

John makes some very good points but I would like to clarify one thing from his post: you are planning three migrations:
1. From 32bit -> 64bit
2. From Windows to Linux
3. From Oracle 10gR2 to 11gR2
The second of these is the one most liekly to give you grief. You certainly should not attempt to combine it with a database upgrade. Either move the database to RHEL and then upgrade it, or upgrade it on Windows and then move it to the new server.
Of these, the first is the least controversial. So it's a nice point whether it is worth upgrading from Windows 32bit to Windows 64bit prior to moving to Linux.
Cheers, APC

Install NetWeaver CE 7.1 on Windows Server 2003 32bit, Oracle database

Hi,
It is possible install NW CE 7.1 for Oracle on Windows Server 2003 32 bit ?
I have installed NW 2004s on Windows Server 2003 platform, and I need install CE 7.1 and then ESR.
I have downloaded CE and ESR 7.1 installs from "SAP Installations & Upgrades" location (DVD number 51033843), but it is only 64 bit version.
Thank you
BB

Yes - because successor releases of Netweaver 7.0 are only available as 64bit. 32bit platfomrs are no more available.
Markus

We're running Windows server 2003 32bit and want to migrate to Windows server 2012R2 64bit, can someone provide a step by step procedure on how to migrate instances on ADAM to AD LDS?

I have no experience in dealing with servers, but my senior has asked me to investigate on how to migrate instances on ADAM (windows server 2003 32bit) to AD LDS (Windows server 2012R2 64 bit) as in place upgrade is not an option as we're running a 32bit
Server and want to migrate to a 64bit Server. can someone please give me a Walkthrough on how to do this.
Thanks in advance.

Hi,
it'd be of great help if you could give me a step by step process of replication.
There is no step-by-step article/guide of replication process, replication between AD LDS instances of the same configuration set is an automatic process.
All we need to make sure is to create a replica of the existing instance, and there is no network/security obstacle preventing the replication.
Please note that we need to install AD LDS from Server manager on Windows Server 2012 and 2012 R2.
More information for you:
Understanding AD LDS Replication and Configuration Sets
http://technet.microsoft.com/en-us/library/cc770465.aspx
Best Regards,
Amy

Windows Server 2003 R2 Enterprise Edition 32 bits Service Pack 2 never finishes searching for updates and use 100% of CPU.

Hi everyone, I am having issues updating a clean Windows Server 2003 R2 Enterprise Edition 32 bits Service Pack 2, so any help with be appreciated cause I've already tried all my cards for the past 5 days in this particular issue without success.
All I did so far is installing Windows Server 2003 R2 Enterprise with Service Pack 2, open IE to update, it keeps searching for updates and never stop, after 20mn to 30mn the process svchost.exe start using 100% of my CPU.
I already tried the following scenarios:
1- Install IE8, install the update KB927891 and the Windows Update Agent 3.0 (I already had this one installed). Reboot and run windows update trough IE8 and the problem did not solved.
2- Install those 2 software "MicrosoftFixit.wu.MATSKB.Run" and "MicrosoftFixit50777", open IE to update, it still hangs and continues eating my CPU. This is the output of "MicrosoftFixit".
Windows Update error 0x8007000D(2014-01-06-T-06_06_34A) --> Not Fixed
Cryptographic service components are not registered (This service is actually running successfully) --> Not Fixed
3- I found the following script that would register some DLL, deleting the "SoftwareDistribution" and forcing windows update to solve the problem and nothing happened either.
Link to script:
http://gallery.technet.microsoft.com/scriptcenter/Dos-Command-Line-Batch-to-fb07b159#content
Here is a link to the content of my WindowUpdate.log file:
https://skydrive.live.com/redir?resid=883EE9BE85F9632B%21105
Thank you in advance for helping.

All I did so far is installing Windows Server 2003 R2 Enterprise with Service Pack 2, open IE to update, it keeps searching for updates and never stop, after 20mn to 30mn the process svchost.exe start using 100% of my CPU.
Herein is the root cause of your issue. A topic that's been discussed in several blogs, forums, and even in the media since September regards a known issue with attempting to patch IE6 RTM via Windows Update.
Aside from that particular issue... browsing the Internet with an unpatched instance of IE6, especially from a Windows Server system, is also asking for a world of hurt.
Might I suggest the following:
Download the IE8 for Windows Server 2003 installer to a thumb drive.
Download the latest Cumulative Security Update for IE8 for Windows Server 2003 to a thumb drive.
Reinstall Windows Server 2003 with Service Pack 2.
Upgrade to IE8 from the thumb drive installer and apply the
Cumulative Security Update.
Now your machine is capable of safely browsing to Windows Update to install the rest of the updates (well, maybe, there's also all those other Security Updates from the past seven years that your machine still has vulnerabilites for -- even those seven
years of updates are going to take a Very Long Time to scan for, download, and install).
Why don't you have a WSUS server? -- noting, wryly, that you've posted in the *WSUS* forum.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Symantec antivirus Best practice for oracle database on windows server 2003

Hi all,
I have an oracle database server on windows server 2003 platform of version 10.2.0.4. what would be best practice of running symantec antivirus on that server as well as database file exclusions from scanning them.
My server had rebooted unexpectedly for many times. in event log i have id as 6008. what may be cause of it..?

Normally, you don't run a virus scanner on a database server because your database server isn't vulnerable to viruses. It's behind firewalls, people aren't reading mail on it, people aren't plugging thumb drives into it, etc. If you do decide that you need to run a virus scanner on a database server, at least exclude the Oracle data files from the scan. Oracle gets very unhappy if someone else tries to open its data files (or, worse, if someone opens a data file before it gets the chance to acquire exclusive access).
Justin

Installation problem with windows server 2003 64 bit

I downloaded all hyperion components from e-deleivery for windows server 2003 64 bit when i tried to install it a message said that some component are not compatible when i removed stratigic finance and FDM components the installation started and completed .in the configuration phase many components failed to configured and here's a copy of the log file:
(Nov 21, 2010, 02:25:51 PM), com.hyperion.cis.config.wizard.adapter.WizardFormAdapterPanel, ERROR, The specified database is already configured.
(Nov 21, 2010, 02:30:34 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
java.lang.NumberFormatException: null
     at java.lang.Integer.parseInt(Unknown Source)
     at java.lang.Integer.valueOf(Unknown Source)
     at com.hyperion.hit.registry.ServiceComponentImpl.getPort(ServiceComponentImpl.java:45)
     at com.hyperion.hub.HubAppServerDeployer.checkOpenLDAPFromRegistry(HubAppServerDeployer.java:282)
     at com.hyperion.hub.HubAppServerDeployer.updateOpenLDAPPort(HubAppServerDeployer.java:175)
     at com.hyperion.hub.HubAppServerDeployer.preDeploy(HubAppServerDeployer.java:113)
     at com.hyperion.cis.config.AppServerDeployer.preDeploy(AppServerDeployer.java:205)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeAppDeploymentTask(RunAllTasksWizardAction.java:604)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:215)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Nov 21, 2010, 02:41:18 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:43:35 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:45:21 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:45:21 PM), com.hyperion.awb.config.AWBDBConfigurator, ERROR, Error:
java.lang.NullPointerException
     at com.sun.org.apache.xerces.internal.dom.ElementImpl.normalize(Unknown Source)
     at com.sun.org.apache.xerces.internal.dom.ElementImpl.normalize(Unknown Source)
     at com.sun.org.apache.xerces.internal.dom.ElementImpl.normalize(Unknown Source)
     at com.sun.org.apache.xerces.internal.dom.ElementImpl.normalize(Unknown Source)
     at com.hyperion.awb.config.PIRegistartionXMLWriter.updateHubDetails(PIRegistartionXMLWriter.java:265)
     at com.hyperion.awb.config.AWBDBConfigurator.configure(AWBDBConfigurator.java:249)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDbConfigTask(RunAllTasksWizardAction.java:658)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:202)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Nov 21, 2010, 02:45:21 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
com.hyperion.cis.config.ProcessingException
     at com.hyperion.awb.config.AWBDBConfigurator.configure(AWBDBConfigurator.java:275)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDbConfigTask(RunAllTasksWizardAction.java:658)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:202)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Nov 21, 2010, 02:47:29 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, There is no logical instance of Shared Services web application in Registry
(Nov 21, 2010, 02:47:29 PM), com.hyperion.awb.config.AWBAppServerDeployer, ERROR, Error occured in deRegisterOldProductInstance(): null
(Nov 21, 2010, 02:47:29 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, There is no logical instance of Shared Services web application in Registry
(Nov 21, 2010, 02:47:29 PM), com.hyperion.awb.config.AWBAppServerDeployer, ERROR, ERROR:
com.hyperion.cis.config.AppDeployException: CMS Client cannot be created
     at com.hyperion.awb.config.AWBAppServerDeployer.publishBPMAInstanceDocument(AWBAppServerDeployer.java:704)
     at com.hyperion.awb.config.AWBAppServerDeployer.registerProductInstance(AWBAppServerDeployer.java:796)
     at com.hyperion.awb.config.AWBAppServerDeployer.postDeploy(AWBAppServerDeployer.java:350)
     at com.hyperion.cis.config.AppServerDeployer.postDeploy(AppServerDeployer.java:336)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeAppDeploymentTask(RunAllTasksWizardAction.java:610)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:215)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Nov 21, 2010, 02:50:11 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:51:11 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:54:20 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:58:04 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:58:16 PM), com.hyperion.essbase.config.EssbaseAgentTaskProcessor, ERROR, Error in executing the script to register Essbase as a service: exitCode = 1
(Nov 21, 2010, 02:58:54 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:59:15 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:59:16 PM), com.hyperion.planning.HspDBConfigurator, ERROR, Error happened: Index: 0, Size: 0
(Nov 21, 2010, 02:59:16 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
com.hyperion.cis.config.ProcessingException
     at com.hyperion.planning.HspDBConfigurator.configure(HspDBConfigurator.java:209)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDbConfigTask(RunAllTasksWizardAction.java:658)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:202)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Nov 21, 2010, 03:03:06 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 03:05:34 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 03:19:29 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 03:19:30 PM), com.hyperion.hfm.config.HfmDbConfigurator, ERROR, Error while configuring HFM DatabaseEntry does not exist for these parameters in tnsnames.ora file.
(Nov 21, 2010, 03:19:30 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
com.hyperion.cis.config.ProcessingException
     at com.hyperion.hfm.config.HfmDbConfigurator.configure(HfmDbConfigurator.java:151)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDbConfigTask(RunAllTasksWizardAction.java:658)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:202)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Nov 21, 2010, 03:19:39 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
java.lang.NullPointerException
     at com.hyperion.hfm.config.HfmAppServerTaskProcessor.execute(HfmAppServerTaskProcessor.java:105)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeCustomTask(RunAllTasksWizardAction.java:741)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:188)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
if any one installed hyperion EPMS on windows server 2003 64 bit please i need your help
thanks in advanced
Edited by: eng3m on Nov 21, 2010 3:32 PM

Hi,
EDGE/Crystal Reports Server and Enterprise are no native 64bit applications. That does mean that they only run in 32bit mode. But you can install it on a 64bit hardware with a 64bit OS.
Regards
-Seb.

Windows Server 2003 No Mouse or Keyboard

Hi,
After a hard reboot (accidentally being unplugged) I have no mouse and keyboard input. I am stuck on the Login Screen. I am using a hard wired USB keyboard and mouse and I don't have a PS/2 on the computer. Accessing the computer remotely is not an option
because I can't login to start any programs.
Thanks

You might try a repair install.
How to Perform an In-Place Upgrade of Windows Server 2003
How to integrate Windows Server 2003 Service Pack 2 files into the Windows Server 2003 installation folder
If the media is lost.
How to replace Microsoft software or hardware, order service packs, and replace product manuals
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

New Windows server 2003 Hyper-V guest fails to boot

Hello,
I'm currently doing some virtualization experiments on my new server hardware. The host hardware is:
IBM x3650 M4
x2 Xeon E5-2609
32GB RAM
x2 480 GB SSDs
Server OS: Windows server 2012
I'd like to test some legacy app virtualization. I've configured a VM and have installed Windows server 2003. The install is done via DVD. The issue at hand is that after the initial installation, the server fails to boot. The VM goes into a reboot loop
and so far the only error logging I'm able to find is in the hosts event log.
Log Name: Microsoft-Windows-Hyper-V-Worker-Admin
Source: Microsoft-Windows-Hyper-V-Worker
Date: 7/8/2014 2:14:48 PM
Event ID: 18560
Task Category: None
Level: Critical
Keywords:
User: NT VIRTUAL MACHINE\A0D20FA4-B27B-4B58-85C1-87D74B0ADD2D
Computer: CCSTS1.cnet2k.cornerstonecredit.net
Description:
'LegacyTS' was reset because an unrecoverable error occurred on a virtual processor that caused a triple fault. If the problem persists, contact Product Support. (Virtual machine ID A0D20FA4-B27B-4B58-85C1-87D74B0ADD2D)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-Worker" Guid="{51DDFA29-D5C8-4803-BE4B-2ECB715570FE}" />
<EventID>18560</EventID>
<Version>0</Version>
<Level>1</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-07-08T21:14:48.544007000Z" />
<EventRecordID>159</EventRecordID>
<Correlation />
<Execution ProcessID="1512" ThreadID="3536" />
<Channel>Microsoft-Windows-Hyper-V-Worker-Admin</Channel>
<Computer>CCSTS1.cnet2k.cornerstonecredit.net</Computer>
<Security UserID="S-1-5-83-1-2698121124-1264104059-3615998341-769460811" />
</System>
<UserData>
<VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
<VmName>LegacyTS</VmName>
<VmId>A0D20FA4-B27B-4B58-85C1-87D74B0ADD2D</VmId>
<Rax>0x0</Rax>
<Rbx>0x0</Rbx>
<Rcx>0x0</Rcx>
<Rdx>0x0</Rdx>
<Rsp>0x804de00c</Rsp>
<Rbp>0x0</Rbp>
<Rsi>0x0</Rsi>
<Rdi>0x0</Rdi>
<R8>0x0</R8>
<R9>0x0</R9>
<R10>0x0</R10>
<R11>0x0</R11>
<R12>0x0</R12>
<R13>0x0</R13>
<R14>0x0</R14>
<R15>0x0</R15>
<Rip>0x80547c7c</Rip>
<Rflags>0x10046</Rflags>
<FpControlStatus>7F030000000000000000000000000000</FpControlStatus>
<XmmControlStatus>0000000000000000801F0000FFFF0000</XmmControlStatus>
<Cr0>0x8001003d</Cr0>
<Cr2>0x804ddffc</Cr2>
<Cr3>0xa02000</Cr3>
<Cr4>0x20</Cr4>
<Cr8>0xf</Cr8>
<Xfem>0x1</Xfem>
<Dr0>0x0</Dr0>
<Dr1>0x0</Dr1>
<Dr2>0x0</Dr2>
<Dr3>0x0</Dr3>
<Dr6>0xffff0ff0</Dr6>
<Dr7>0x400</Dr7>
<Es>0000000000000000FFFFFFFF2300F3C0</Es>
<Cs>0000000000000000FFFFFFFF08009BC0</Cs>
<Ss>0000000000000000FFFFFFFF100093C0</Ss>
<Ds>0000000000000000FFFFFFFF2300F3C0</Ds>
<Fs>00F0DFFF00000000FF1F0000300093C0</Fs>
<Gs>0000000000000000FFFFFFFF00000000</Gs>
<Ldtr>00000000000000000000000000000000</Ldtr>
<Tr>90685580000000006800000050008B00</Tr>
<Idtr>000000000000FF0700F4038000000000</Idtr>
<Gdtr>000000000000FF0300F0038000000000</Gdtr>
<Tsc>0x148e4294</Tsc>
<ApicBase>0xfee00900</ApicBase>
<SysenterCs>0x0</SysenterCs>
<SysenterEip>0x0</SysenterEip>
<SysenterEsp>0x0</SysenterEsp>
</VmlEventLog>
</UserData>
</Event>
My VM config
<?xml version="1.0" encoding="UTF-16" standalone="yes"?>
<configuration>
<_24984ed0-bdad-4b90-82b2-5d59f874e91e_>
<ChannelInstanceGuid type="string">{E4E9CD0E-4BBF-4C1B-B655-715781690655}</ChannelInstanceGuid>
</_24984ed0-bdad-4b90-82b2-5d59f874e91e_>
<_7d80d3db-61ee-4879-8879-5609f1100ad0_>
<address type="string">5353,00000000,00</address>
<version type="integer">1</version>
</_7d80d3db-61ee-4879-8879-5609f1100ad0_>
<_83f8638b-8dca-4152-9eda-2ca8b33039b4_>
<controller0>
<drive0>
<pathname type="string">E:\Hyper-V\VHD\LegacyTS.vhdx</pathname>
<pool_id type="string"></pool_id>
<type type="string">VHD</type>
</drive0>
<drive1>
<pathname type="string"></pathname>
<type type="string">NONE</type>
</drive1>
</controller0>
<controller1>
<drive0>
<pathname type="string">SCSI\CDROM&VEN_IBM_SATA&PROD_DEVICE_81Y3681\4&1864BF9E&0&010000</pathname>
<pool_id type="string"></pool_id>
<type type="string">ISO</type>
</drive0>
<drive1>
<pathname type="string"></pathname>
<type type="string">NONE</type>
</drive1>
</controller1>
<version type="integer">5</version>
</_83f8638b-8dca-4152-9eda-2ca8b33039b4_>
<_8e3a359f-559a-4b6a-98a9-1690a6100ed7_>
<port0>
<connection type="string"></connection>
</port0>
<port1>
<connection type="string"></connection>
</port1>
<version type="integer">2</version>
</_8e3a359f-559a-4b6a-98a9-1690a6100ed7_>
<_8f0d2762-0b00-4e04-af4f-19010527cb93_>
<controller0>
<drive0>
<pathname type="string"></pathname>
<type type="string">VFD</type>
</drive0>
</controller0>
<version type="integer">1</version>
</_8f0d2762-0b00-4e04-af4f-19010527cb93_>
<_a80e9c62-750a-4a6b-9548-d46677e806be_>
<ChannelInstanceGuid type="string">{23c9c636-93de-4aec-9bef-220766177a24}</ChannelInstanceGuid>
<Connection>
<AltPortName type="string">Dynamic Ethernet Switch Port</AltPortName>
<AltSwitchName type="string">Intel(R) I350 Gigabit Network Connection - Virtual Switch</AltSwitchName>
<AuthorizationScope type="string"></AuthorizationScope>
<ChimneyOffloadWeight type="integer">0</ChimneyOffloadWeight>
<Feature_C885BFD1-ABB7-418F-8163-9F379C9F7166>
<DisplayName type="string"></DisplayName>
<Flags type="integer">0</Flags>
<Setting_97274751-A1EC-4DC2-941D-B7F9A1AED814>
<Data type="bytes">AAIAAGQAAAAAAAAAAQAAAAAAAAA=
</Data>
<Version type="integer">256</Version>
</Setting_97274751-A1EC-4DC2-941D-B7F9A1AED814>
<Settings>
<Id type="string">97274751-A1EC-4DC2-941D-B7F9A1AED814</Id>
</Settings>
</Feature_C885BFD1-ABB7-418F-8163-9F379C9F7166>
<Features>
<Id type="string">C885BFD1-ABB7-418F-8163-9F379C9F7166</Id>
</Features>
<HostResources>
<HostResource type="string">8758EB1A-9687-41FC-9319-AE867D46BA5C</HostResource>
</HostResources>
<PoolId type="string"></PoolId>
<PreventIPSpoofing type="bool">False</PreventIPSpoofing>
<TestReplicaPoolId type="string"></TestReplicaPoolId>
<TestReplicaSwitchName type="string"></TestReplicaSwitchName>
</Connection>
<FriendlyName type="string">Network Adapter</FriendlyName>
<IsConnected type="bool">True</IsConnected>
<MacAddress type="string">00-15-5D-01-18-02</MacAddress>
<MacAddressIsStatic type="bool">False</MacAddressIsStatic>
<PortName type="string">E7F02418-A1EB-4FF9-84F8-BF461B2D00C6</PortName>
<SwitchName type="string">8758EB1A-9687-41FC-9319-AE867D46BA5C</SwitchName>
<VpciInstanceGuid type="string">{E9444985-111B-404A-82FE-48608A397676}</VpciInstanceGuid>
</_a80e9c62-750a-4a6b-9548-d46677e806be_>
<_ac6b8dc1-3257-4a70-b1b2-a9c9215659ad_>
<base_board>
<serial_number type="string">9595-3600-2199-6834-7686-3927-30</serial_number>
</base_board>
<bios_guid type="string">{B54BE7B5-05A4-4C4A-A2BD-D63272C7CCCD}</bios_guid>
<bios_serial_number type="string">9595-3600-2199-6834-7686-3927-30</bios_serial_number>
<boot>
<device0 type="string">Optical</device0>
<device1 type="string">HardDrive</device1>
<device2 type="string">Network</device2>
<device3 type="string">Floppy</device3>
</boot>
<chassis>
<asset_tag type="string">8437-8592-0329-9603-9215-1886-12</asset_tag>
<serial_number type="string">9595-3600-2199-6834-7686-3927-30</serial_number>
</chassis>
<num_lock type="bool">False</num_lock>
<version type="integer">2</version>
</_ac6b8dc1-3257-4a70-b1b2-a9c9215659ad_>
<_db8b9818-b4bb-4725-b99d-b4612716b6b4_>
<version type="integer">0</version>
</_db8b9818-b4bb-4725-b99d-b4612716b6b4_>
<global_settings>
<devices>
<allow_reduced_fc_redundancy type="bool">False</allow_reduced_fc_redundancy>
<generation_id type="string">883d11122d9b7b2c521be0c045ef3760</generation_id>
<storage_allow_full_scsi_command_set type="bool">False</storage_allow_full_scsi_command_set>
</devices>
<disk_merge_pending type="bool">False</disk_merge_pending>
<metrics>
<devicetype>
<deviceinstance>
<guid type="string">B637F346-6A0E-4DEC-AF52-BD70CB80A21D</guid>
<metric>
<enabled type="bool">False</enabled>
<lastcomputedtime type="integer">0</lastcomputedtime>
<peaktime type="integer">0</peaktime>
<poolid type="string"></poolid>
<resourcetypeid type="string">B637F347-6A0E-4DEC-AF52-BD70CB80A21D</resourcetypeid>
<starttime type="integer">0</starttime>
<typecode type="string">3F6F1051-C8FC-47EF-9821-C07240848748;0</typecode>
<value type="integer">0</value>
</metric>
</deviceinstance>
<guid type="string">B637F346-6A0E-4DEC-AF52-BD70CB80A21D</guid>
</devicetype>
<devicetype>
<deviceinstance>
<guid type="string">4764334D-E001-4176-82EE-5594EC9B530E</guid>
<metric>
<enabled type="bool">False</enabled>
<lastcomputedtime type="integer">0</lastcomputedtime>
<peaktime type="integer">0</peaktime>
<poolid type="string"></poolid>
<resourcetypeid type="string">4764334E-E001-4176-82EE-5594EC9B530E</resourcetypeid>
<starttime type="integer">0</starttime>
<typecode type="string">394DCE66-458F-4895-AE56-41D7C9602A49</typecode>
<value type="integer">0</value>
</metric>
<metric>
<enabled type="bool">False</enabled>
<lastcomputedtime type="integer">0</lastcomputedtime>
<peaktime type="integer">0</peaktime>
<poolid type="string"></poolid>
<resourcetypeid type="string">4764334E-E001-4176-82EE-5594EC9B530E</resourcetypeid>
<starttime type="integer">0</starttime>
<typecode type="string">FF85EA46-9933-4436-BE5D-C96827399966</typecode>
<value type="integer">0</value>
</metric>
<metric>
<enabled type="bool">False</enabled>
<lastcomputedtime type="integer">0</lastcomputedtime>
<peaktime type="integer">0</peaktime>
<poolid type="string"></poolid>
<resourcetypeid type="string">4764334E-E001-4176-82EE-5594EC9B530E</resourcetypeid>
<starttime type="integer">0</starttime>
<typecode type="string">04BDF59E-580D-4441-8828-FFFE44472D2D</typecode>
<value type="integer">0</value>
</metric>
</deviceinstance>
<guid type="string">4764334D-E001-4176-82EE-5594EC9B530E</guid>
</devicetype>
<devicetype>
<deviceinstance>
<guid type="string">83F8638B-8DCA-4152-9EDA-2CA8B33039B4</guid>
<metric>
<enabled type="bool">False</enabled>
<lastcomputedtime type="integer">0</lastcomputedtime>
<peaktime type="integer">0</peaktime>
<poolid type="string"></poolid>
<resourcetypeid type="string">70BB60D2-A9D3-46AA-B654-3DE53004B4F8</resourcetypeid>
<starttime type="integer">0</starttime>
<typecode type="string">AD29978B-AAB6-44AE-81CD-0609BF929F18;0\0\L</typecode>
<value type="integer">0</value>
</metric>
</deviceinstance>
<guid type="string">83F8638B-8DCA-4152-9EDA-2CA8B33039B4</guid>
</devicetype>
</metrics>
<owner>
<sid type="string">S-1-5-21-1940488291-1951097212-1584025624-1392</sid>
</owner>
<power>
<host_shutdown>
<action type="integer">1</action>
</host_shutdown>
<host_startup>
<action type="integer">1</action>
</host_startup>
</power>
<snapshots>
<list>
<size type="integer">0</size>
</list>
</snapshots>
<unexpected_termination>
<action type="integer">1</action>
</unexpected_termination>
<vhd_path_acled type="bool">True</vhd_path_acled>
</global_settings>
<manifest>
<size type="integer">11</size>
<vdev001>
<device type="string">58f75a6d-d949-4320-99e1-a2a2576d581c</device>
<flags type="integer">1</flags>
<instance type="string">58F75A6D-D949-4320-99E1-A2A2576D581C</instance>
<name type="string">Microsoft Synthetic Mouse</name>
</vdev001>
<vdev002>
<device type="string">197f74e3-b84b-46de-8ae6-82f1cd181cdc</device>
<flags type="integer">1</flags>
<instance type="string">197F74E3-B84B-46DE-8AE6-82F1CD181CDC</instance>
<name type="string">Microsoft Synthetic Keyboard</name>
</vdev002>
<vdev003>
<device type="string">f3cf6965-e8d3-44a9-9b7d-a04245ea7525</device>
<flags type="integer">1</flags>
<instance type="string">F3CF6965-E8D3-44A9-9B7D-A04245EA7525</instance>
<name type="string">Microsoft Synthetic Video</name>
</vdev003>
<vdev004>
<device type="string">84eaae65-2f2e-45f5-9bb5-0e857dc8eb47</device>
<flags type="integer">1</flags>
<instance type="string">84EAAE65-2F2E-45F5-9BB5-0E857DC8EB47</instance>
<name type="string">Microsoft Heartbeat Component</name>
</vdev004>
<vdev005>
<device type="string">2a34b1c2-fd73-4043-8a5b-dd2159bc743f</device>
<flags type="integer">1</flags>
<instance type="string">2A34B1C2-FD73-4043-8A5B-DD2159BC743F</instance>
<name type="string">Microsoft Key-Value Pair Exchange Component</name>
</vdev005>
<vdev006>
<device type="string">9f8233ac-be49-4c79-8ee3-e7e1985b2077</device>
<flags type="integer">1</flags>
<instance type="string">9F8233AC-BE49-4C79-8EE3-E7E1985B2077</instance>
<name type="string">Microsoft Shutdown Component</name>
</vdev006>
<vdev007>
<device type="string">2497f4de-e9fa-4204-80e4-4b75c46419c0</device>
<flags type="integer">1</flags>
<instance type="string">2497F4DE-E9FA-4204-80E4-4B75C46419C0</instance>
<name type="string">Microsoft Time Synchronization Component</name>
</vdev007>
<vdev008>
<device type="string">5ced1297-4598-4915-a5fc-ad21bb4d02a4</device>
<flags type="integer">1</flags>
<instance type="string">5CED1297-4598-4915-A5FC-AD21BB4D02A4</instance>
<name type="string">Microsoft VSS Component</name>
</vdev008>
<vdev009>
<device type="string">6c5addb9-a11a-4e8e-84cb-e6208201db63</device>
<flags type="integer">1</flags>
<instance type="string">6C5ADDB9-A11A-4E8E-84CB-E6208201DB63</instance>
<name type="string">Microsoft RDV Component</name>
</vdev009>
<vdev010>
<device type="string">2fc216b0-d2e2-4967-9b6d-b8a5c9ca2778</device>
<flags type="integer">1</flags>
<instance type="string">A80E9C62-750A-4A6B-9548-D46677E806BE</instance>
<name type="string">Synthetic Ethernet Port</name>
</vdev010>
<vdev011>
<device type="string">d422512d-2bf2-4752-809d-7b82b5fcb1b4</device>
<flags type="integer">1</flags>
<instance type="string">24984ED0-BDAD-4B90-82B2-5D59F874E91E</instance>
<name type="string">Synthetic SCSI Controller</name>
</vdev011>
<version type="integer">260</version>
</manifest>
<properties>
<global_id type="string">B37E54CD-FFBB-44DA-8B7C-322B922EAD72</global_id>
<highly_available type="bool">False</highly_available>
<last_powered_off_time type="integer">130493284127496105</last_powered_off_time>
<last_powered_on_time type="integer">130493284065876653</last_powered_on_time>
<last_state_change_time type="integer">130493284127496105</last_state_change_time>
<name type="string">LegacyTS</name>
<notes type="string"></notes>
<type_id type="string">Virtual Machines</type_id>
<version type="integer">1024</version>
</properties>
<settings>
<global>
<logical_id type="string">B37E54CD-FFBB-44DA-8B7C-322B922EAD72</logical_id>
</global>
<memory>
<bank>
<dynamic_memory_enabled type="bool">True</dynamic_memory_enabled>
<limit type="integer">1048576</limit>
<priority type="integer">5000</priority>
<reservation type="integer">512</reservation>
<size type="integer">4096</size>
<target_memory_buffer type="integer">20</target_memory_buffer>
</bank>
<vnuma>
<max_size_per_node type="integer">14770</max_size_per_node>
</vnuma>
</memory>
<processors>
<count type="integer">1</count>
<features>
<limit type="bool">False</limit>
</features>
<limit type="integer">100000</limit>
<limit_cpuid type="bool">False</limit_cpuid>
<reservation type="integer">0</reservation>
<vnuma>
<count_per_node>
<max type="integer">4</max>
</count_per_node>
<node_per_socket>
<max type="integer">1</max>
</node_per_socket>
</vnuma>
<weight type="integer">100</weight>
</processors>
<stopped_at_host_shutdown type="bool">False</stopped_at_host_shutdown>
<vnuma>
<enabled type="bool">False</enabled>
</vnuma>
</settings>
</configuration>
If its relevant, the host is not yet activated license wise. I downloaded the demo version so I could test my idea before making a purchase to go ahead with full implementation.
As it stands right now I'm not sure how to troubleshoot this. Many searches on google have not turned up any helpful info. Does anyone have any ideas?
Thanks,
D

Hi ,
First , please refer to the supported guest OS of windows 2012 hyper-v :
http://technet.microsoft.com/library/hh831531.aspx
2003/R2 should be with sp2 and max 2 virtual processors .
"'LegacyTS' was reset because an unrecoverable error occurred on a virtual processor that caused a triple fault."
If the issue is not due to the above items , you can try to check the "CPU compatibility " in that VM settings for troubleshooting:
Hope it helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Printing problems on Windows server 2003

Hi All,
I was printing perfectly on my shared printer (HP Laserjet 1000) on my Windows server 2003 with a domain.
Since this week I can't print anymore. I keeps failing with failed authentification. Nothing changed on my server or iMac except the latest security patches on the iMac.
The event log shows up user _lp that is trying to access the printer... not the user that I'm using...
I tried to uninstall and reinstall the printer on the iMac without success.
Anyone has an idea how to fix this ?
Thanks,
Pascal

I'm having the same problem now with printers on Windows 2000 systems. The print queue (which worked forever on 10.4 and initially on 10.5) now gets access denied from the SMB server. The "add authentication" thread doesn't fix it as the latest update seems to send user ID "_lp" to the SMB server rather than the user credentials set up in CUPS.
I tried "smb://user:password@server/printer" and it still doesn't work.
Again, it's worked for a long while and just recently broke due to Leopard or an update.
-Rick

Error in Installation of EPM 11.1.1.3 in windows server 2003-32 bit, AMD 64

Hi All,,
We are trying to install EPM 11.1.1.3 ( We are trying to install only Client Components ) in server machine( Processor AMD64, OS: Windows Server 2003 32Bit) we are installing the JAVA 1.6 Also.But we double Click the InstallerTool.cmd it will open the command prompt and throws an error below and disappearing.
"R:\essbase\\jre\win32\1.6.0\"\..\..\..\installTOOL.jar
>
R:essbase>endlocal
R:essbase>pause
Press any key to continue...
This is an error while double click the Installertool.cmd
If it is Java Compatibility, how can we resolve it.
We are trying to another XP machine with the same dump it is working
But in Windows Server machine it is not working.
For installation of client components only, is Java 1.6 installation is required??
Could you pls help me What is the Problem
It will graetful appreciate to resolve it
Thanks in Advance.........

Hi
1. Did you delete tmp and cache after patching
2. Did you clear the cached files in your browser post patching
3. Generally the first time you access the system it takes time but the consquent attempts should not take much time.
4. Did you increase the Java heap
     ex: HFMWeb
HKEY_LOCAL_MACHINE\SOFTWARE\Hyperion Solutions\HFMWeb0\HyS9FinancialManagementWeb_epmsystem1
                JVMOption21 | - Xms2048m
                JVMOption38 | - Xmx2048m
Next,
When you are accessing the HFM Application please monitor the task manager and let us know the CPU and Physical Memory utilisation.Monitor the HSVDatasource.exe process .
How much RAM do you have on your server and how many applications/components are hosted on that server?
Thanks
Anjum

Windows Server 2003 R2 32bit keeps unexpectedly rebooting - System Stop Failure

Similar Messages

Maybe you are looking for