Windows Server 2008 Explorer error when i right click on folder

Hi everybody.
I have installed a new Windows Server 2008 64-bit, update it to latest.
I have a problem that happens when i right click on a folder. The error only happens if i right click on a folder that has only 1 character long folder name. Doesn't matter if the name is for example: "1" or "a" or "f", the explorer.exe crashes and gives me
error:
This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information.
image:
full error info:
Problem signature:
  Problem Event Name:    APPCRASH
  Application Name:    Explorer.EXE
  Application Version:    6.1.7601.17567
  Application Timestamp:    4d672ee4
  Fault Module Name:    msvcrt.dll
  Fault Module Version:    7.0.7600.16385
  Fault Module Timestamp:    4a5bdfbe
  Exception Code:    40000015
  Exception Offset:    000000000002aa8e
  OS Version:    6.1.7601.2.1.0.274.10
  Locale ID:    1033
  Additional Information 1:    f530
  Additional Information 2:    f5308e7edca7281fd3c8f9f1fa48021a
  Additional Information 3:    4a44
  Additional Information 4:    4a44581c8f470fcc2cbc842e91755c88
The error happened to me on different pc before so it is not related to hardware. The problem happens also if i create folder on desktop, problem stays if i create a new account, the problem goes away if i rename the folder to at least 2 character long name
(for example: "1a", "de"), by slowly double click it. If i go to Start --> Computer --> Local Disk (C:) --> create New Folder with 1 character long name and than go to Organize, i can cut, but not do the same to paste the folder inside another location,
because the error happens.
I didn't install Visual Studio.
How to solve the problem ?

This is not the usual behavior of the windows Server. 
Please perform the following things 
1) Perform a clean boot 
http://technetfaqs.wordpress.com/2009/05/18/how-to-clean-boot-in-windows-2008-server/
2) Go to the safe mode and try to perform a virus check using the malicious virus removal tool
https://support.microsoft.com/kb/890830/en-us
3) If none of the above helps then you should generate the dump file and analyze it to find the root cause of the problem which is not easy for the new users. How ever if you generate it and put it to the sky drive I will try to analyze and let you know
http://support.microsoft.com/kb/254649/en-us
http://www.arabitpro.com

Similar Messages

  • Window server 2008 r2 error show "stop :- c00002e3 security account manager initialization failed because of the for A DIVICE ATTACHED to the system is not funcation"

    Hi All
    Please help
    my server not working showing display error window server 2008 r2  error show "stop :- c00002e3 security account manager initialization failed because of the for A DIVICE ATTACHED to the system is not funcation"
    Please help me how to resolve this issue ???
    thnaks !!!

    Hi,
    If there is any external device plug into your computer, please unplug it and restart the Server.
    You can also test the issue in Safe mode.
    If it can boot into Safe mode, please update any driver has yellow warning on it, also check if the dump file is existing under %SystemRoot%\, if so, please help to post back for our research.
    Kate Li
    TechNet Community Support

  • PT 8.53 Windows Server 2008 R2 Error on booting domain.

    Hi all,
    We are setting up a test environment for PT 8.53 on Windows Server 2008 R2. Everything in the installation went correctly then we try to boot the domain in PSADMIN for the first time we are getting an error when trying to:
    exec BBL -A:
    CMDTUX_CAT:816: ERROR: Cannot exec, executable file not found
    tmboot: WARN: No BBL available on site <server name>.
    Will not attempt to boot server processes on that site.
    Tuxedo info: Oracle Tuxedo, Version 11.1.1.2.0 with VS2010, 64-bit, Patch Level 056
    Just seeing if anyone else has come accross this or has any ideas we could try.
    Thanks.
    Edited by: 991229 on Mar 1, 2013 7:15 AM

    Interesting, when you did the configure step in psadmin, did BBL start then or does it fail there as well? I've not installed 8.53 yet anywhere, but in my 8.52 env, doing a reconfig will start the BBL to ensure things are shut down. My guess is it fails, which I think would cause your configuration to not occur maybe?
    Command to execute (1-10, q) : 4
    This option will shutdown the domain.
    Do you want to continue? (y/n) [n] :y
    tmadmin - Copyright (c) 2007-2008 Oracle.
    Portions * Copyright 1986-1997 RSA Data Security, Inc.
    All Rights Reserved.
    Distributed under license by Oracle.
    Tuxedo is a registered trademark.
    No bulletin board exists. Entering boot mode.
    INFO: Oracle Tuxedo, Version 10.3.0.0, 64-bit, Patch Level 067Booting admin processes ...
    exec BBL -A :
    process id=12818 ... Started.
    1 process started.
    Attaching to active bulletin board.
    What if you get all your env variables set, and try to run tmadmin by hand?
    set TUXDIR, PATH, PS_MACH, PS_HOME, PS_CFG_HOME, PS_SERVDIR, PS_SERVER_CFG, TUXCONFIG, LD_LIBRARY_PATH, NTSYMBOL_PATH, APPDIR (I think that's all of them, I'd have to look again)
    then from cmd prompt run tmadmin
    at the tmadmin prompt run boot -y
    that would extract psadmin from the process, if that fails to find BBL, then I think you might need to pull out Process Monitor from sysinternals, and trace the tuxedo start process, which will show you what path BBL is really being looked for in, and possible help you solve this. You can also use Process Explorer to review what environment variables are set for what processes (such as psadmin or tmadmin).
    Let me know what you find, as I'm interested in knowing what is causing this.

  • Clusterware 10.2.0.4 on windows server 2008, runcluvfy error out

    I am installing oracle clusterware 10.2.0.4 on windows server 2008.
    I got the following error when I ran runcluvfy stage -post hwos -n node1,node2
    Path "C:\temp\" does not exist and cannot be created on nodes
    This meessage is happening after Checking node reachability and Checking user equivalence phases.
    This is my complete log:
    Performing pre-checks for cluster services setup
    Checking node reachability...
    Node reachability check passed from node "node1".
    Checking user equivalence...
    User equivalence check passed for user "administrator".
    ERROR:
    Path "c:\temp\" does not exist and cannot be created on nodes:
    node1
    Verification will proceed with nodes:
    node2
    Pre-check for cluster services setup was unsuccessful on all the nodes.
    Does anyone have a clue for this error? I have read some one's input back in 2/2009 on AIX. But the solution did not help me.
    Please help.
    Thanks to all.
    Chris Zhao

    Does this directory exist and have the correct permissions and ownership granted for the Oracle 10g RAC Clusterware?
    If not, then you need to create the directory and grant correct permissions to it. Also, have you checked to see if Windows 2008 platform has been certified and validated for Oracle 10g RAC installation?
    Cheers,
    Ben Prusinski

  • Windows Server 2008 SP1 Error :- Cert_E_expired (0x800b0101)

    Hi
    I am unable to install sp1 on my organization server 2008 R2 could you help me out.
    Below is CBS log
    013-06-29 01:13:56, Info                  CBS    SPI: Root directory being used: C:\6513907c3269dd8dddbb4a5fbe92\dc54876ebfd88b043cbef17287\
    2013-06-29 01:13:56, Info                  CBS    SPI: Self trust verification failed for C:\6513907c3269dd8dddbb4a5fbe92\dc54876ebfd88b043cbef17287\spc.xml. 
    0x57
    2013-06-29 01:13:56, Info                  CBS    SPI: Succeeded verifying trust on C:\6513907c3269dd8dddbb4a5fbe92\dc54876ebfd88b043cbef17287\spc.cat
    2013-06-29 01:13:56, Info                  CBS    SPI: Succeeded verifying trust on C:\6513907c3269dd8dddbb4a5fbe92\dc54876ebfd88b043cbef17287\spc.xml
    2013-06-29 01:13:56, Info                  CBS    SPI: Self trust verification failed for C:\6513907c3269dd8dddbb4a5fbe92\dc54876ebfd88b043cbef17287\SPWizUI.dll. 
    0x57
    2013-06-29 01:13:56, Info                  CBS    SPI: Succeeded verifying trust on C:\6513907c3269dd8dddbb4a5fbe92\dc54876ebfd88b043cbef17287\spc.cat
    2013-06-29 01:13:56, Info                  CBS    SPI: Succeeded verifying trust on C:\6513907c3269dd8dddbb4a5fbe92\dc54876ebfd88b043cbef17287\SPWizUI.dll
    2013-06-29 01:13:56, Info                  CBS    SPI: Self trust verification failed for C:\6513907c3269dd8dddbb4a5fbe92\dc54876ebfd88b043cbef17287\SpError.dll. 
    0x57
    2013-06-29 01:13:56, Info                  CBS    SPI: Succeeded verifying trust on C:\6513907c3269dd8dddbb4a5fbe92\dc54876ebfd88b043cbef17287\spc.cat
    2013-06-29 01:13:56, Info                  CBS    SPI: Succeeded verifying trust on C:\6513907c3269dd8dddbb4a5fbe92\dc54876ebfd88b043cbef17287\SpError.dll
    2013-06-29 01:13:56, Info                  CBS    SPI: Self trust verification failed for C:\Windows\System32\SpError.dll.  0x57
    2013-06-29 01:13:56, Info                  CBS    SPI: SPC CAT verification failed for C:\Windows\System32\SpError.dll.  0x800b0100
    2013-06-29 01:13:57, Info                  CBS    SPI: Succeeded verifying trust on C:\Windows\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\nt5.cat
    2013-06-29 01:13:57, Info                  CBS    SPI: Succeeded verifying trust on C:\Windows\System32\SpError.dll
    2013-06-29 01:13:57, Info                  CBS    SPI: Loading SPError.dll contained at C:\6513907c3269dd8dddbb4a5fbe92\dc54876ebfd88b043cbef17287\SpError.dll
    2013-06-29 01:13:57, Info                  CBS    SPI: Self trust verification failed for C:\Windows\System32\spinstall.exe.  0x57
    2013-06-29 01:13:57, Info                  CBS    SPI: SPC CAT verification failed for C:\Windows\System32\spinstall.exe.  0x800b0100
    2013-06-29 01:13:57, Info                  CBS    SPI: Succeeded verifying trust on C:\Windows\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\ntexe.cat
    2013-06-29 01:13:57, Info                  CBS    SPI: Succeeded verifying trust on C:\Windows\System32\spinstall.exe
    2013-06-29 01:13:57, Info                  CBS    SPI: Self trust verification failed for C:\Windows\System32\SPC_SP1_Wave1.xml.  0x57
    2013-06-29 01:13:57, Error                 CBS    SPI: (SPCVerifyTrust:1664)Failed to CryptCATAdminCalcHashFromFileHandle GLE=0x57
    2013-06-29 01:13:57, Info                  CBS    SPI: Installed SPInstall or XML not trusted.  Continuing with current version.
    2013-06-29 01:13:57, Info                  CBS    SPI: Self trust verification failed for C:\Windows\System32\EventProviders\spcmsg.dll.  0x57
    2013-06-29 01:13:57, Info                  CBS    SPI: Succeeded verifying trust on C:\6513907c3269dd8dddbb4a5fbe92\dc54876ebfd88b043cbef17287\spc.cat
    2013-06-29 01:13:57, Info                  CBS    SPI: Succeeded verifying trust on C:\Windows\System32\EventProviders\spcmsg.dll
    2013-06-29 01:13:57, Info                  CBS    SPI: No need to update spcmsg.dll event provider
    2013-06-29 01:13:57, Info                  CBS    SPI: Reporting Started event
    2013-06-29 01:13:57, Info                  CBS    SPI: SQM is not opted in
    2013-06-29 01:13:57, Error                 CBS    SPI: (SPIRegQueryDWORDValue:413)Failed to query registry value: UploadDisableFlag er=0x2
    2013-06-29 01:14:00, Info                  CBS    SPI: Starting SP Compatibility\Applicability scan
    2013-06-29 01:14:00, Error                 CBS    SPI: (SPIRegQueryDWORDValue:400)Failed to open the registry root: n/a, key: SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\ServicePack\SP1.
    er=0x2
    2013-06-29 01:14:00, Error                 CBS    SPI: (SPIRegQueryDWORDValue:400)Failed to open the registry root: n/a, key: SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\ServicePack\SP1.
    er=0x2
    2013-06-29 01:14:00, Error                 CBS    SPI: (SPIRegQueryDWORDValue:400)Failed to open the registry root: n/a, key: SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\ServicePack\SP1.
    er=0x2
    2013-06-29 01:14:00, Error                 CBS    SPI: (SPIRegQueryDWORDValue:400)Failed to open the registry root: n/a, key: SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\ServicePack\SP1.
    er=0x2
    2013-06-29 01:14:01, Info                  CBS    Session: 30307383_3597668274 initialized by client SP Coordinater Engine.
    2013-06-29 01:14:13, Info                  CBS    WinVerifyTrust failed [HRESULT = 0x800b0101 - CERT_E_EXPIRED]
    2013-06-29 01:14:13, Error                 CBS    Failed to verify if catalog file \\?\C:\Windows\Servicing\Packages\Package_149_for_KB2732052~31bf3856ad364e35~amd64~~6.1.1.2.cat
    is valid. [HRESULT = 0x800b0101 - CERT_E_EXPIRED]
    2013-06-29 01:14:13, Info                  CBS    Failed to initialize internal package [HRESULT = 0x800b0101 - CERT_E_EXPIRED]
    2013-06-29 01:14:13, Info                  CBS    Failed to create package. [HRESULT = 0x800b0101 - CERT_E_EXPIRED]
    2013-06-29 01:14:13, Error                 CBS    Failed to internally open package. [HRESULT = 0x800b0101 - CERT_E_EXPIRED]
    2013-06-29 01:14:13, Error                 CBS    SPI: (CSPICbsClient::EnumPackages:156)Failed to open package hr=0x800b0101
    2013-06-29 01:14:13, Error                 CBS    SPI: (CSystem::EnumerateCbsPackages:360)Failed to populate CBS package list hr=0x800b0101
    2013-06-29 01:14:13, Info                  CBS    Session: 30307383_3597668274 finalized. Reboot required: no [HRESULT = 0x00000000 - S_OK]
    2013-06-29 01:14:13, Info                  CBS    SPI: Failed enumerating CBS packages
    2013-06-29 01:14:13, Error                 CBS    SPI: (GetLatestVersionFromCBSStore:131)ATL exception hr=0x800b0101
    2013-06-29 01:14:13, Error                 CBS    SPI: (CSPCInstallTask::ApplicabilityScan:632)Failed to get latest version of Package_for_KB976902~31bf3856ad364e35~amd64~~6.1.1.17514
    from the store hr=0x800b0101
    2013-06-29 01:14:13, Error                 CBS    SPI: (CSPInstall::CompatibilityApplicabilityScan:1303)Failed in applicability check of task hr=0x800b0101
    2013-06-29 01:14:13, Info                  CBS    SPI: Ending Compatibility\Applicability scan
    2013-06-29 01:14:14, Error                 CBS    SPI: (PerformSPInstallation:833)Failed to install SP using UI hr=0x800b0101
    2013-06-29 01:14:14, Error                 CBS    SPI: (wmain:1105)Failed to perform SP installation hr=0x800b0101
    2013-06-29 01:14:14, Info                  CBS    SPI: Reporting Failed event
    2013-06-29 01:14:35, Info                  CBS    Session: 30307383_3945058149 initialized by client RMT.
    2013-06-29 01:14:35, Info                  CBS    Session: 30307383_3945058149 finalized. Reboot required: no [HRESULT = 0x00000000 - S_OK]
    2013-06-29 01:15:32, Info                  CBS    SPI: SPInstall terminating, return code 0x800b0101
    2013-06-29 01:15:32, Error                 CBS    SPI: (SPIRegQueryStringValue:700)Failed to query registry value: MiscString2 er=0x2
    2013-06-29 01:15:32, Error                 CBS    SPI: (CSystem::GetMachineName:395)Failed to query machine name from RAC hr=0x80070002
    2013-06-29 01:15:34, Info                  CBS    SPI: Deleting directory: C:\6513907c3269dd8dddbb4a5fbe92\dc54876ebfd88b043cbef17287.  ret=2
    2013-06-29 01:16:44, Info                  CBS    Session: 30307384_940682078 initialized by client RMT.
    2013-06-29 01:16:44, Info                  CBS    Session: 30307384_940682078 finalized. Reboot required: no [HRESULT = 0x00000000 - S_OK]
    2013-06-29 01:18:53, Info                  CBS    Session: 30307384_2232445103 initialized by client RMT.
    2013-06-29 01:18:53, Info                  CBS    Session: 30307384_2232445103 finalized. Reboot required: no [HRESULT = 0x00000000 - S_OK]

    Please run the system update readiness tool.
    http://windows.microsoft.com/en-us/windows7/What-is-the-System-Update-Readiness-Tool?SignedIn=1
    Then post the contents of;
    %SYSTEMROOT%\Logs\CBS\CheckSUR.log
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Windows Server 2008 R2 clients can't double click to open Office files

    Let me start by saying I don't know too much about Server 2008.
    I have Server set up so desktop clients (Windows 7 Pro 64-bit) can log in as their user on their own machines.  On two of the client machines (mine and my bosses, I have admin rights on everything) a couple funny things are happening:
    1.  Can't open a Word or Excel file by double clicking the icon on the desktop.  Error is as follows:
    Excel
    Microsoft Excel cannot access the file 'C:\Users\(username)\AppData\Roaming\Microsoft\Excel\XLSTART\PERSONAL.XLSB'.  There are several possible reasons:  The file name or path does not exist.  The file is being used by another program. 
    The workbook you are trying to save has the same name as a currently open workbook.
    Word
    The file Normal.dotm cannot be opened because there are problems with the contents.
    and then
    Word cannot open this document template. (C:\Users\(username)\...\AVWiz14s.dotm)
    and then
    Word cannot open the existing file. (Normal)
    and then Word stops responding.
    Note that I can open these documents normally from the start menu.  I have determined this error has something to do with the server because I have tried a bunch of stuff on the internet, including an Excel hotfix, which did nothing.
    2.  Desktop icons flicker, rearrange themselves, and even disappear completely at times.  I do not know what causes this, but I do believe this is a server issue.
    3.  I get recycle bin errors every time I log in, and every time I try to delete anything:
    The Recycle Bin on \\intecserver\Office Employee Files\kneureuter\My Documents\My Videos is corrupted.  Do you want to empty the Recycle Bin for this drive?
    Sometimes I get that error for 3-4 different directories.
    What I've tried:
    I tried reinstalling Office, and that made no difference.
    I have the drive from the server "Office Employee Files" mapped to network drive Y:.  I can open that and go to my account folder on there, navigate to "Desktop" and open the files from there, but not on the physical desktop on my
    computer.
    These files aren't shortcuts on the desktop, their permanent home is on the desktop.
    Just to reiterate, if I moved these files into a folder on the desktop, they will open fine.  If I open them from within Excel or Word, they open fine.  If I open them from the server drive mapped onto my terminal, they open fine.  Just can't
    open them by double-clicking the file if it is directly on the desktop.  Any ideas?
    I logged onto my account from a different computer and double-clicking to open the files worked fine on that computer.  Both computers running Windows 7 Pro 64-bit and Office 2010 Pro.  So that limits it to this machine and my bosses machine.
    Since you can't create a shortcut for something on the desktop, I created a new folder on the desktop and put the files in that folder.  From there I created a shortcut and put that on the desktop.  That worked!
    However, that's just a band-aid.  I need to fix this problem sooner than later. 
    Anyone have any ideas?  Thanks!

    Hi AxEheaD15,
    If  the Desktop or the My Documents folder is redirected to a network location, Office applications may exhibit  the similar issues .
    For details please refer to following link:
    http://support.microsoft.com/kb/2816253/en-us
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Screen hangs and then reloads when i right click a folder or any object in windows 8.1

    when ever i right click something like a picture,docx,folder etc the cursor shows the loading sign and does not load right-click menu and after showing the loading sign for a few seconds, screen hangs(screen becomes white-ish) and after few more seconds
    reload. no matter how many times i right-click same thing happens

    What will this do actually? will it refresh my Pc(remove apps etc)?
    Hi,
    Which operation\solution did you refer to? Could you please give use more detailed description?
    Regarding to the command posted
    Kapil-Arya , it is intended to fix component store corruption, it will not refresh your PC
    http://technet.microsoft.com/en-us/library/hh852138.aspx
    And have you tried other solutions? Any result?
    Regards
    Yolanda Zhu
    TechNet Community Support

  • Oracle 10g on Windows server 2008 R2 - error : Logon failed. Details: ADO

    Hello,
    I have installed Oracle 10g 64bit client on Windows 2008 R2 64bit server. I have installed Visual studio framework 2.0 and 3.5 on Application Server i.e. Windows 2008 R2 64bit Server.
    But when i run report from server, it shows following error message :
    *Logon failed. Details: ADO Error Code: 0x Source: ADODB.Connection Description: Provider cannot be found. It may not be properly installed. Error in File C:\Windows\TEMP\testreport {FE5A4BC0-DF74-4E58-87F1-0F203501A3FC}.rpt: Unable to connect: incorrect log on parameters.*
    I have created report with design time connection with oracle 10g tables. It runs in my development machine. but when i deployed on windows 2008 r2 bit server, it raised above error. After that, i created another report with command instead of using design time database connection with table, it run on server smoothly.
    So Pls help me to come out from this problem.
    If anyone has solution for it, pls share it
    Thanks in Advance
    Keyur

    Today I installed all software in following order.
    1) First install oracle 10g 32bit client & 64bit client on windows 2008 R2 development server.
    2) After oracle installation, I installed visual studio 2005 and tested crystal report on server in debug mode. It was working completely.
    (Both type of report - report created with the help of command in crystal report & crystal report created in direct reference of database table)
    Then i published my test project and setup on same server for clientside testing. but on client machine, it shows error message.
    that was : The type initializer for 'CrystalDecisions.CrystalReports.Engine.ReportDocument' threw an exception.
    One more thing i have observed that was report created with help of command in crystal report was working on client machine. But report in which i have added table direclty, was generating above error.
    Then i installed crredist2005_x86.msi and crredist2005_x64.msi from visual studio installed folder. After installation, error message changed on clinet machine.
    Error Message : Logon failed. Details: Error Code: 0x Source: ADODB.Connection Description: Provider cannot be found. It may not be properly installed. Error in File C:\Windows\TEMP\tablesource {EE65A074-2C4E-43DE-A3FC-1FE673093BF1}.rpt: Unable to connect: incorrect log on parameters
    Still in debug mode on server, asp.net project is working with crystal report. I think, when i run asp.net project in debug mode on server, project may be run on 32bit mode. When i run same project from published setup on client machine, it may be run on 64bit mode.
    I can't understand how to solve this problem.
    Pls. help me.
    Thanks in Advance
    Keyur

  • GPP Delete policy not working on Windows Server 2008 R2 RDS when deleting shared printers with status access denied.

    Hi!
    I Have one AD Security group for each shared printer, I have one GPP that map the printer if the user is in the security group that belong to the printer. And one GPP to delete the printer if the user is NOT member of the security group. The security group
    is also applied in “Security” tab on the printsrv with PRINT rights  and “everyone” is removed. This works 100 % on Windows 7 clients and Windows 2003 Terminal Servers. But on Windows 2008 R2 RDS this dont work.The Delete Policy will not delete the shared
    printer. No warning in any logs, and the gpresult shows that the gpo setting applyed sucessfully. The only way I can make the Delete policy work is if i give the user print rights on the printer on the printsrv. Looks like for the policy to work on 2008
    R2 the user must have print rights on the printer object on the printserver. The GPP Delete Policy will not delete printers that have status : access denied. Anyone else had this problem?

    Hi,
    Based on your description, it seems that we need to give users appropriate permissions, for the error
    Access is denied is more or less related to permissions.
    However, we can avoid deploying the GPP printer delete policy. As far as I know, we can use Item-Lvel Targeting of GPP to push the shared printers
    to the targeted users or groups.
    Regarding ILT, the following articles can be referred to for more information.
    Preference Item-Level Targeting
    http://technet.microsoft.com/en-us/library/cc733022.aspx
    Security Group Targeting
    http://technet.microsoft.com/en-us/library/cc772471.aspx
    Best regards,
    Frank Shen

  • Windows Server 2008 x64: Error on Shadow Copies tab

    Pulling up the Shadow Copies tab on any of my drives gives the following error:
    Initialization failed.  Error 0x80040154: Class not registered.
    Any ideas?  Per the event log, the VSS service is starting and stopping successfully with no errors.  No errors are being recorded in the event log when this error happens.

    Hi Richard,
    This issue may be occur due to some DLL files failure registered on the system.
    Troubleshooting steps:
    1. Open a command-prompt on the problematic server, and type the following commands to manually Register the following VSS DLL's.
    cd %windir%\system32
    regsvr32.exe /i eventcls.dll
    regsvr32.exe /i swprv.dll
    regsvr32.exe vssui.dll
    regsvr32.exe vss_ps.dll
    regsvr32.exe msxml.dll
    regsvr32.exe msxml2.dll
    regsvr32.exe msxml3.dll
    regsvr32.exe ole32.dll
    regsvr32.exe oleaut32.dll
    regsvr32.exe es.dll
    vssvc /register
    2. If the above steps don't resolve the issue. Since the VSS UI also depends on the proper functionality of the "Task Scheduler" service. Please check and verify the "Task Scheduler" service is Started. After a reboot,
    please check if the Shadow Copies Tab can function properly.
    Hope it helps.
    David Shen - MSFT
    worked for me on our 2008 R2 SP1 PDC server with file server (and DFS) role.
    However I got a bunch of errors on registering most of components, only a few succeeded (vss_ps.dll,
    msxml3.dll and command vssvc /register) - that was enough to restore the Shadow Copies tab in volume properties, I was getting access denied before.

  • Windows Server 2008: Sysprep Error: Error [0x0f0073] SYSPRP RunExternalDlls:Not running DLLs; either the machine is in an invalid state or we couldn't update the recorded state, dwRet = 32[gle=0x00000020]

    I have a base template (which has never been sysprep'd) from which I create linked clones.  After the linked clone comes up, I run the following command:
    c:\windows\system32\sysprep\sysprep.exe /generalize /oobe /reboot /unattend:c:\windows\panther\unattend.xml
    This works fine for the first few linked clones, but after about 3-4 linked clones are running, I start to hit "A fatal error occurred while trying to sysprep the machine."
    ****c:\windows\panther\setuperr.log****
    2013-03-29 16:40:07, Error      [0x0f0073] SYSPRP RunExternalDlls:Not running DLLs; either the machine is in an invalid state or we couldn't update the recorded state, dwRet = 32[gle=0x00000020]
    2013-03-29 16:40:07, Error      [0x0f00a8] SYSPRP WinMain:Hit failure while processing sysprep cleanup providers; hr = 0x80070020[gle=0x00000020]
    ****c:\windows\panther\unattend.xml****
    <?xml version='1.0' encoding='utf-8'?>
    <unattend xmlns="urn:schemas-microsoft-com:unattend">
        <settings pass="oobeSystem">
            <component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <InputLocale>en-US</InputLocale>
                <SystemLocale>en-US</SystemLocale>
                <UILanguage>en-US</UILanguage>
                <UILanguageFallback>en-US</UILanguageFallback>
                <UserLocale>en-US</UserLocale>
            </component>
            <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <AutoLogon>
                    <Enabled>true</Enabled>
                    <Username>Administrator</Username>
                    <Password>
                        <Value>ca$hc0w</Value>
                        <PlainText>true</PlainText>
                    </Password>
                </AutoLogon>
                <OOBE>
                    <HideEULAPage>true</HideEULAPage>
                    <NetworkLocation>Work</NetworkLocation>
                    <ProtectYourPC>3</ProtectYourPC>
                </OOBE>
                <UserAccounts>
                    <AdministratorPassword>
                        <Value>ca$hc0w</Value>
                        <PlainText>true</PlainText>
                    </AdministratorPassword>
                </UserAccounts>
                <TimeZone>Pacific Standard Time</TimeZone>
            </component>
        </settings>
        <settings pass="specialize">
            <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <ProductKey>7M67G-PC374-GR742-YH8V4-TCBY3</ProductKey>
                <ComputerName>*</ComputerName>
            </component>
        </settings>
    </unattend>
    ****c:\windows\panther\setupact.log****
    2013-03-29 16:40:07, Info       [0x0f004d] SYSPRP The time is now 2013-03-29 16:40:07
    2013-03-29 16:40:07, Info       [0x0f004e] SYSPRP Initialized SysPrep log at c:\windows\system32\sysprep\Panther
    2013-03-29 16:40:07, Info       [0x0f0054] SYSPRP ValidateUser:User has required privileges to sysprep machine
    2013-03-29 16:40:07, Info       [0x0f0056] SYSPRP ValidateVersion:OS version is okay
    2013-03-29 16:40:07, Info       [0x0f005e] SYSPRP ScreenSaver:Screen saver was already disabled, no need to disable it for sysprep
    2013-03-29 16:40:07, Info       [0x0f007e] SYSPRP FCreateTagFile:Tag file c:\windows\system32\sysprep\Sysprep_succeeded.tag does not already exist, no need to delete anything
    2013-03-29 16:40:07, Info       [0x0f005f] SYSPRP ParseCommands:Found supported command line option 'GENERALIZE'
    2013-03-29 16:40:07, Info       [0x0f005f] SYSPRP ParseCommands:Found supported command line option 'OOBE'
    2013-03-29 16:40:07, Info       [0x0f005f] SYSPRP ParseCommands:Found supported command line option 'REBOOT'
    2013-03-29 16:40:07, Info       [0x0f005f] SYSPRP ParseCommands:Found supported command line option 'UNATTEND'
    2013-03-29 16:40:07, Info       [0x0f004a] SYSPRP WaitThread:Entering spawned waiting thread
    2013-03-29 16:40:07, Info                         [sysprep.exe] UnattendFindAnswerFile: Looking at explicitly provided unattend file [c:\windows\panther\unattend.xml]...
    2013-03-29 16:40:07, Info                         [sysprep.exe] UnattendFindAnswerFile: [c:\windows\panther\unattend.xml] meets criteria
    for an explicitly provided unattend file.
    2013-03-29 16:40:07, Info                  SYSPRP SysprepSearchForUnattend: Using unattend file at [c:\windows\panther\unattend.xml].
    2013-03-29 16:40:07, Info                  SYSPRP SysprepSearchForUnattend: [generalize] pass in unattend file [c:\windows\panther\unattend.xml] either doesn't exist or passed
    validation
    2013-03-29 16:40:07, Info                  SYSPRP WinMain:Found unattend file at [c:\windows\panther\unattend.xml]; caching...
    2013-03-29 16:40:07, Info                  SYSPRP WinMain:Processing unattend file's 'generalize' pass...
    2013-03-29 16:40:07, Info                  SYSPRP Sysprep is running a generalize pass with the following unattend file: [%windir%\panther\unattend.xml]
    2013-03-29 16:40:07, Info                  SYSPRP RunUnattendGeneralizePass: Sysprep unattend generalize pass exits; hr = 0x0, hrResult = 0x0, bRebootRequired = 0x0
    2013-03-29 16:40:07, Info       [0x0f003f] SYSPRP WinMain:Processing 'cleanup' request.
    2013-03-29 16:40:07, Error      [0x0f0073] SYSPRP RunExternalDlls:Not running DLLs; either the machine is in an invalid state or we couldn't update the recorded state, dwRet = 32[gle=0x00000020]
    2013-03-29 16:40:07, Error      [0x0f00a8] SYSPRP WinMain:Hit failure while processing sysprep cleanup providers; hr = 0x80070020[gle=0x00000020]
    2013-03-29 16:48:52, Info       [0x0f004c] SYSPRP WaitThread:Exiting spawned waiting thread
    2013-03-29 16:48:52, Info       [0x0f0059] SYSPRP ScreenSaver:Screen saver was originally disabled, leaving it disabled
    2013-03-29 16:48:52, Info       [0x0f0052] SYSPRP Shutting down SysPrep log
    2013-03-29 16:48:52, Info       [0x0f004d] SYSPRP The time is now 2013-03-29 16:48:52

    Hi,
    This is typical of an OEM license issue.
    To avoid this in the future you should look at site/volume licensing.
    Anyway.
    so, first check if you can re-arm by runing the
    slmgr.vbs /dlv and check the re-arm counter, if it set to zero.. you need to do the following :
    http://support.microsoft.com/kb/929828 (set the <SkipRearm>1</SkipRearm> like in the example, note: this option will make the product key window to appear in the setup process).
    you can also try running : slmgr.vbs -rearm, to rearm Windows.
    after that, let's come back to the sysprep process.. for syspreping already syspreped machine we have to change few keys in the registry :
    HKEY_LOCAL_MACHINE\SYSTEM\Setup\Status\SysprepStatus\GeneralizationState\
    CleanupState:2
    HKEY_LOCAL_MACHINE\SYSTEM\Setup\Status\SysprepStatus\GeneralizationState\
    GeneralizationState:7
    After done with the registry, do the following :
    Start -> Run : msdtc -uninstall (wait few seconds)
    Start -> Run : msdtc -install (wait few seconds)
    Restart the machine
    Check the registry for the right registry keys values
    sysprep with the new XML answerfile.
    Source: Olegm
    If you find my information useful, please rate it. :-)

  • Error on clone database, oracle 10g release 2 for windows server 2008

    Hi,
    OS: Windows Server 2008 X64
    Oracle: oracle 10g release r2 for windows server 2008
    An error occurred when creating a database, stop at last step, Screenshot:
    [http://temp.wsria.com/oracle_create_db.png|http://temp.wsria.com/oracle_create_db.png]
    the trace log content:
    [main] [9:56:35:982] [CommandLineArguments.process:563] CommandLineArguments->process: number of arguments = 32
    [main] [9:56:35:982] [CommandLineArguments.process:738] CommandLineArguments->process: Create Database argument is specified
    [main] [9:56:35:982] [CommandLineArguments.process:910] CommandLineArguments->process: template Name argument is specified
    [main] [9:56:35:982] [CommandLineArguments.process:960] CommandLineArguments->process: db name argument is specified
    [main] [9:56:35:982] [CommandLineArguments.process:3074] CommandLineArguments->process: in Operation Type is Creation/GenerateScripts Mode condition
    [main] [9:56:35:997] [CommandLineArguments.process:3298] CommandLineArguments->process: Successfully process command line arguments
    [main] [9:56:36:668] [Host.checkOPS:2055] Inside checkOPS
    [main] [9:56:36:668] [Host.checkOPS:2067] Trying to check cluster existence
    [main] [9:56:36:715] [Library.getInstance:97] Created instance of Library.
    [main] [9:56:36:715] [Library.load:197] Loading orauts.dll...
    [main] [9:56:36:715] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
    [main] [9:56:36:715] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
    [main] [9:56:36:715] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\orauts.dll
    [main] [9:56:36:715] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\orauts.dll from path=
    D:\oracle\product\10.2.0\db_1\bin
    [main] [9:56:36:715] [Library.load:197] Loading MSVCRT.dll...
    [main] [9:56:36:715] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
    [main] [9:56:36:715] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
    [main] [9:56:36:715] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\MSVCRT.dll
    [main] [9:56:36:731] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\MSVCRT.dll from path=
    D:\oracle\product\10.2.0\db_1\bin
    [main] [9:56:36:731] [Library.load:197] Loading orawsec10.dll...
    [main] [9:56:36:731] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
    [main] [9:56:36:731] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
    [main] [9:56:36:731] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\orawsec10.dll
    [main] [9:56:36:731] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\orawsec10.dll from path=
    D:\oracle\product\10.2.0\db_1\bin
    [main] [9:56:36:731] [Library.load:197] Loading orasrvm10.dll...
    [main] [9:56:36:731] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
    [main] [9:56:36:731] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
    [main] [9:56:36:731] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\orasrvm10.dll
    [main] [9:56:36:731] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\orasrvm10.dll from path=
    D:\oracle\product\10.2.0\db_1\bin
    [main] [9:56:36:731] [Version.isPre10i:189] isPre10i.java: Returning FALSE
    [main] [9:56:36:731] [WindowsSystem.regKeyExists:1006] WindowsSystem.regKeyExists: mainkey= HKEY_LOCAL_MACHINE subkey = Software\Oracle\Ocr
    [main] [9:56:36:746] [WindowsSystem.getCSSConfigType:1163] configType=null
    [main] [9:56:36:746] [Host.checkOPS:2073] cluster existence:false
    [main] [9:56:36:746] [Host.checkOPS:2111] Cluster installed=false
    [main] [9:56:36:902] [InitParamHandler.endElement:506] CustomSGA flag: false
    [main] [9:56:36:902] [InitParamHandler.endElement:507] Database Type: MULTIPURPOSE
    [main] [9:56:36:918] [InitParamHandler.endElement:508] Mem Percentage: 40
    [main] [9:56:36:918] [InitParamHandler.endElement:526] distributing Memory: 13737443328
    [main] [9:56:36:918] [MemoryCalculator.calculateMemory:122] Setting SGA to MAX_SGA 1610612736
    [main] [9:56:36:918] [StorageAttributes.setAttribute:232] IN threadID:1 group#=1
    [main] [9:56:36:918] [StorageAttributes.setAttribute:232] IN threadID:1 group#=2
    [main] [9:56:36:918] [StorageAttributes.setAttribute:241] Current threadID=1
    [main] [9:56:36:918] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[0]=1
    [main] [9:56:36:918] [StorageAttributes.setAttribute:258] vRedoGroups:[1]
    [main] [9:56:36:918] [StorageAttributes.setAttribute:288] setAttribute: bExists=false
    [main] [9:56:36:918] [StorageAttributes.setAttribute:232] IN threadID:1 group#=3
    [main] [9:56:36:918] [StorageAttributes.setAttribute:241] Current threadID=1
    [main] [9:56:36:918] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[0]=1
    [main] [9:56:36:918] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[1]=2
    [main] [9:56:36:918] [StorageAttributes.setAttribute:258] vRedoGroups:[1, 2]
    [main] [9:56:36:933] [StorageAttributes.setAttribute:288] setAttribute: bExists=false
    [main] [9:56:36:933] [TemplateManager.parseCloneTemplate:1477] See for any transportable datafiles in TemplateManager.....
    [main] [9:56:36:933] [TemplateManager.isInstallTemplate:2178] Selected Template by user:=General Purpose
    [main] [9:56:36:933] [TemplateManager.isInstallTemplate:2185] The Message Id to be searched:=GENERAL_PURPOSE
    [main] [9:56:36:933] [TemplateManager.parseCloneTemplate:1489] create new clone data file for tp file.......
    [main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7184] setupOIDCommandlineParameters:
    [main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7185] m_regWithdirService: false
    [main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7186] m_unregWithdirService: false
    [main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7187] m_updateDirService: false
    [main] [9:56:36:933] [Verifier.processRawConfigFile:3523] StorageType == 0
    [main] [9:56:36:933] [Verifier.setOradataDest:4349] setOradataDest:dfDest=D:\oracle\product\10.2.0\oradata
    [main] [9:56:36:933] [TemplateManager.updateDatafileDestination:1957] updateDatafiles:datafileDir=D:\oracle\product\10.2.0\oradata
    [main] [9:56:36:933] [TemplateManager.updateDatafileDestination:2103] From template, RedoLogGrName=1
    [main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2118] new file name redo01.log
    [main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2103] From template, RedoLogGrName=2
    [main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2118] new file name redo02.log
    [main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2103] From template, RedoLogGrName=3
    [main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2118] new file name redo03.log
    [main] [9:56:36:965] [ProgressOnlyHost.performOperation:162] processRawConfigFile=false
    [main] [9:56:36:965] [Verifier.validateTemplate:1629] StorageType == 0
    [main] [9:56:36:965] [ProgressOnlyHost.performOperation:178] validateTemplate=true
    [main] [9:56:36:965] [OracleHome.isRacEnabled:149] bRacOn = false
    [main] [9:56:36:980] [Verifier.validateTemplate:1629] StorageType == 0
    [main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
    [main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
    [main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
    [main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
    [main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
    [main] [9:56:36:980] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\oracle\product\10.2.0\
    [main] [9:56:36:980] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\oracle\product\10.2.0\
    [main] [9:56:36:980] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\oracle\product\10.2.0\
    [main] [9:56:36:980] [Verifier.getControlfFileSizes:3001] No. of Control files:=3
    [main] [9:56:37:105] [Host.executeSteps:4044] Executing steps....
    [main] [9:56:37:105] [Host.setUpForOperation:2920] setUpForOperation: Mode = 128
    [main] [9:56:37:121] [Host.executeSteps:4186] setupForOperation returned: true
    [main] [9:56:37:121] [Host.createStepSQLInterface:5948] sid =ora10g
    [main] [9:56:37:136] [SQLEngine.initialize:242] Execing SQLPLUS/SVRMGR process...
    [main] [9:56:37:136] [SQLEngine.initialize:270] m_bReaderStarted: false
    [main] [9:56:37:136] [SQLEngine.initialize:274] Starting Reader Thread...
    [Thread-4] [9:56:37:355] [StepContext$ModeRunner.run:2478] ---- Progress Needed:=true
    [Thread-4] [9:56:37:464] [BasicStep.execute:202] Executing Step : CLONE_DB_CREATION_RMAN_RESTORE
    [Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01092
    [Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01034
    [Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-03114
    [Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-12560
    [Thread-4] [9:56:37:464] [StepErrorHandler.setIgnorableErrors:250] setting Ignorable Error: ORA-01109
    [Thread-4] [9:56:37:464] [BasicStep.configureSettings:304] messageHandler being set=null
    [Thread-4] [9:56:37:464] [BasicStep.execute:202] Executing Step : INSTANCE_CREATION
    [Thread-4] [9:56:37:464] [BasicStep.configureSettings:304] messageHandler being set=null
    [Thread-4] [9:56:37:479] [InitParamAttributes.sortParams:3532] m_sortOn:-1 sortOn:4
    [Thread-4] [9:56:37:620] [OracleHome.isRacEnabled:149] bRacOn = false
    [Thread-4] [9:56:37:667] [Host.noEntryinOratab:5115] Check made for oratab arg passed............
    [Thread-4] [9:56:37:667] [Oradim.getAddEntryCommand:353] AddEntry=[D:\oracle\product\10.2.0\db_1\bin\oradim.exe, -new, -sid, ORA10G, -startmode, manual, -spfile]
    [Thread-4] [9:56:38:899] [Oradim.getEditEntryCommand:422] getEditEntry cmd=[D:\oracle\product\10.2.0\db_1\bin\oradim.exe, -edit, -sid, ORA10G, -startmode, auto, -srvcstart, system]
    [Thread-4] [9:56:39:55] [Oradim.addSidToRegistry:871] oracleHomeKey: SOFTWARE\ORACLE\KEY_OraDb10g_home1
    [Thread-4] [9:56:39:117] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@c73f0d8
    [Thread-4] [9:56:39:117] [CloneRmanRestoreStep.executeImpl:217] Instance Creation went fine..........
    [Thread-4] [9:56:39:117] [CloneRmanRestoreStep.executeImpl:224] db_recovery_file_dest=D:\oracle\product\10.2.0\flash_recovery_area
    [Thread-4] [9:56:39:117] [CloneRmanRestoreStep.executeImpl:227] db_recovery_file_dest_size=2147483648
    [Thread-4] [9:56:39:991] [SQLEngine.setSpool:1750] old Spool = null
    [Thread-4] [9:56:39:991] [SQLEngine.setSpool:1751] Setting Spool = D:\oracle\product\10.2.0\db_1\cfgtoollogs\dbca\ora10g\CloneRmanRestore.log
    [Thread-4] [9:56:39:991] [SQLEngine.setSpool:1752] Is spool appendable? --> true
    [Thread-4] [9:56:39:991] [CloneRmanRestoreStep.executeImpl:320] starting with pfile=D:\oracle\product\10.2.0\admin\ora10g\pfile\init.ora

    Check your SQLNET.AUTHENTICATION_SERVICES settings in sqlnet.ora file.
    ORA-28547 : Connection to server failed, probable Net8 admin error
    thanks
    http://swervedba.wordpress.com/

  • Backup Error : The Data Is Invalid Windows Server 2008 R2

    Hello,
    I have a Problem when I try to make Backups to Partition C in Windows Server 2008 R2:
    Error The Data is Invalid.
    Obs: I can make backups for System Reserved Partition .
    I had the same problem 2 months ago (the data is invalid), Then I folowed this the advice to delete "Framework64\v2.0.50727\Temporary
    ASP.NET Files" and worked for me , from this post: http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/89052b85-9c9b-479f-ab76-a20da3cc4696
    Now I have the same problem and I delete the
    Temporary ASP.NET Files , but it is not working , I received the same error on backup:
    "The backup operation that started at '‎2012‎-‎09‎-‎20T07:13:26.024163900Z' has failed with following error code '2147942413'. Please review the event details for a solution, and then rerun the backup operation once the issue is resolved."
    When I try vssadmin list writers, Everything is ok , "No error" .
    I tried to run :
    net stop "System Event Notification Service"
    net stop "COM+ Event System"
    net stop "Microsoft Software Shadow Copy Provider"
    net stop "Volume Shadow Copy"
    cd /d %windir%\system32
    net stop vss
    net stop swprv
    regsvr32 /s ole32.dll
    regsvr32 /s oleaut32.dll
    regsvr32 /s vss_ps.dll
    vssvc /register
    regsvr32 /s /i swprv.dll
    regsvr32 /s /i eventcls.dll
    regsvr32 /s es.dll
    regsvr32 /s stdprov.dll
    regsvr32 /s vssui.dll
    regsvr32 /s msxml3.dll
    net start "System Event Notification Service"
    net start "COM+ Event System"
    net start "Microsoft Software Shadow Copy Provider"
    net start "Volume Shadow Copy"
    But is not Working
    Any Advice ?
    Thank's

    Hello Lucian,
    the issue may be caused by an invalid entry inside the following registry sub tree.
    HKey_Local_Machine\Software\Microsoft\Windows NT\CurrentVersion\ProfileList
    Please open the registry editor with regedit.
    Expand and local to the subtree, check if there is an entry that has a ".bak" value appended. If so, this may be cause the failure when trying to resolve the SID of the writer.
    Please backup the registry key first, and then delete that entry with the extra ".bak" and reboot the server then test the backup
    Run the command "vssadmin list writers" and make sure all the writers are stable with no errors
    Please look for errors in application event logs after you initiate backup on the server
    Sincerely, Asifkhan -- Please mark my post helpful if it was really helpful to you.

  • Unable to install Directory Sync tool in windows server 2008 R2 Eneterprise

    Hi,
    I am unable to install Directory Sync  in windows server 2008 R2 Eneterprise.i have joined my machine domain joined computer running Windows Server 2008 r2 enterprise,when i click dirsync.exe then gives below Error.
    The Windows Azure Active Directory Sync tool must be installed on a domain joined computer running Windows Server 2008 Service Pack 2 or later,or Windows Server 2008 r2 Service Pack 1 or later
    Please help on this why this happing when i try to installed DirSync software.
    Regards
    Anil Kumar

    Hi,
    have you already installed .net framwork 3.5 and 4.5.1 on that machine?
    http://technet.microsoft.com/en-us/library/jj151831.aspx
    Also make sure that you run the install command from an elevated command prompt.
    Hope that helps,
    Lutz

  • Issue with disabling teredo with Windows Server 2008(non R2)

     Hello,
    I am not able to disable teredo on Windows Server 2008 (non R2) .When I try to run the same set of commands on Windows Server 2008 R2 it works fine.I have followed the instructions as in the below link
    http://technet.microsoft.com/en-us/library/cc770710(v=ws.10).aspx
    C:\Windows\system32>netsh interface teredo show state
    Teredo Parameters
    Type                    : client
    Server Name             : teredo.ipv6.microsoft.com.
    Client Refresh Interval : 30 seconds
    Client Port             : unspecified
    State                   : offline
    Error                   : client is in a managed network
    C:\Windows\system32>netsh interface teredo set state disabled
    Ok.
    C:\Windows\system32>netsh interface teredo show state
    Teredo Parameters
    Type                    : client
    Server Name             : teredo.ipv6.microsoft.com.
    Client Refresh Interval : 30 seconds
    Client Port             : unspecified
    I have also tried changing the below registry to disable teredo , that didnot work as well.
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\DisabledComponents DWORD value set to 8.But the teredo status for the netsh command remains the same even after reboot.
    When I try to disable the 6to4 or isatap it works fine.I have checked in device manager ->network adapters with show hidden devices enabled, but I dont see teredo adapter even when teredo is enabled as per netsh.Also I dont see teredo adapter in add
    legacy hardware- > network adapters - > Microsoft devices , but I see isatap and 6to4 adapters in there.
    Can someone please help me..
    Thanks in Advance

    Hi,
    In device manager, add legacy hardware, install Teredo adapter, update the drivers. Reboot and check if you can modify the status.
    If this failed, reset tcp/ip stack.
    http://support.microsoft.com/kb/299357
    Hope this helps.

Maybe you are looking for

  • Display download status in app store

    Hy everyone, I have started the download of OSX 10.9 on the App Store. I can see the bar in Launchpad, but i can't see the download status anywhere (time left, download spped, size downloaded...) when i update an app, i can see the details related to

  • Still frame stuck in canvas

    Hello, I'm working on new project and I've got a still frame showing in my canvas on playback. I've deleted the track and drag something new in its place and am still getting the still. Any suggestions? Thanx, John

  • Itunes 10.2.0.34 can't see my Iphone4

    I just installed iTunes 10.2.0.34 and it now it can't see anymore my iPhone 4 (OS 4.2.1). Tried reeboot, recovery mode, reinstalling ITunes twince...nothing to do. The same Iphone works perfectly with a previous version of iTunes on an other computer

  • Problems to generate NLB file with the Oracle Locale Builder

    Oracle EE 10.2.0.4 (64) RH5 (64) I generated a new file NLT, but I can not generate the NLB file. When using the option to generate the NLB the, OLB does nothing. The environment variables ORACLE_HOME, ORACLE_SID and ORA_NLS10 are set correctly. What

  • How to hide the to address

    I am sending a email to a list of addresses seperated by comma. The to address (all email addresses) is shown to all persons. How do I hide the to address from showing ? I am using Java mail 1.3 Thanks, bala