Windows server 2008 r2 backup

hi ........
when i take system state backup from command promt or windows backup utility then give me a error
systemstate backup failed .........check backup logs
Error in deletion of [\\?\Volume{15c46c92-2c8f-11e2-b15a-806e6f6e6963}\System Volume Information\EfaData\SYMEFA.DB] while pruning the target VHD: Error [0x80070020] The process cannot access the file because it is being used by another process.
shabrez khan

Hi Shabrez,
At first glance this seems to be an issue where there is a file lock conflict involved on the Symefa.db file. also the error code 0x80070020 suggests that there is also a conflict with a file lock.
http://blogs.technet.com/b/doxley/archive/2009/11/05/converting-windows-error-codes-to-something-more-friendly.aspx
The below is a useful way to workout the windows error codes 0x8007.... Which may help for easier resolution in the future.
I would first check the share and storage management to see what is holding this file open.
Regards,
Tom

Similar Messages

Windows Server 2008 R2 Backup failing with error - 0x8004231F

Hi,
I have Windows Server 2008 R2 Web Edition. Everything was working fine until recently. I tried checking for the log files, but I see that there are no log files that are created now in the location C:\Windows\Logs\WindowsServerBackup. The only files that
are being created recently are of the type mentioned below.
Wbadmin.1.etl
WbadminUI.0.etl
etc.
I tried removing the old backup and starting a new backup. But, even now it is failing with the same error.
When running the backup from the PowerShell, the output is as below.
PS C:\Users\administrator> Wbadmin start backup -backupTarget:\\localhost\E$\WindowsImageBackup\Server01 -systemState -vss
Copy
wbadmin 1.0 - Backup command-line tool
(C) Copyright 2004 Microsoft Corp.
Note: The backed up data cannot be securely protected at this destination.
Backups stored on a remote shared folder might be accessible by other
people on the network. You should only save your backups to a location
where you trust the other users who have access to the location or on a
network that has additional security precautions in place.
Retrieving volume information...
This will back up volume System Reserved (100.00 MB) (Selected Files),SAN(I:) (Selected Files),Local Disk(C:) (Selected
Files) to \\localhost\E$\WindowsImageBackup\Server01.
Do you want to start the backup operation?
[Y] Yes [N] No y
The backup operation to \\localhost\E$\WindowsImageBackup\Server01 is starting.
Starting to back up the system state [12/8/2013 9:29 AM]...
Creating a shadow copy of the volumes specified for backup...
Creating a shadow copy of the volumes specified for backup...
Creating a shadow copy of the volumes specified for backup...
Summary of the backup operation:
The backup of the system state failed [12/8/2013 9:30 AM].
Log of files successfully backed up:
C:\Windows\Logs\WindowsServerBackup\Backup-08-12-2013_09-29-49.log
Log of files for which backup failed:
C:\Windows\Logs\WindowsServerBackup\Backup_Error-08-12-2013_09-29-49.log
There is not enough disk space to create the volume shadow copy on the storage location. Make sure that, for all volumes
to be backup up, the minimum required disk space for shadow copy creation is available. This applies to both the backup
storage destination and volumes included in the backup.
Minimum requirement: For volumes less than 500 megabytes, the minimum is 50 megabytes of free space. For volumes more th
an 500 megabytes, the minimum is 320 megabytes of free space.
Recommended: At least 1 gigabyte of free disk space on each volume if volume size is more than 1 gigabyte.
ERROR - A Volume Shadow Copy Service operation error has
occurred: (0x8004231f)
Insufficient storage available to create either the shadow copy storage file or other shadow copy data.
If you see the free space available in each of the drives, they are in plenty.
C:\ 7.5 GB free of 70 GB
E:\ 250 GB free of 499 GB
I:\ 86.7 GB free of 350 GB
I am out of any hints on how I can proceed now. Has any one had similar issues? Can any one give any hint on this? Thanks.
Thanks.

Some Additional info.
Shadow Copy Storage association
   For volume: (\\?\Volume{a9fb0474-f1bd-11e0-b235-806e6f6e6963}\)\\?\Volume{a9f
b0474-f1bd-11e0-b235-806e6f6e6963}\
   Shadow Copy Storage volume: (\\?\Volume{a9fb0474-f1bd-11e0-b235-806e6f6e6963}
\)\\?\Volume{a9fb0474-f1bd-11e0-b235-806e6f6e6963}\
   Used Shadow Copy Storage space: 0 B (0%)
   Allocated Shadow Copy Storage space: 0 B (0%)
   Maximum Shadow Copy Storage space: 32 MB (32%)
Shadow Copy Storage association
   For volume: (I:)\\?\Volume{ddf6a51c-1282-11e3-b291-000c293b01d1}\
   Shadow Copy Storage volume: (I:)\\?\Volume{ddf6a51c-1282-11e3-b291-000c293b01
d1}\
   Used Shadow Copy Storage space: 0 B (0%)
   Allocated Shadow Copy Storage space: 0 B (0%)
   Maximum Shadow Copy Storage space: 35 GB (10%)
Shadow Copy Storage association
   For volume: (E:)\\?\Volume{0e3bf713-125d-11e3-b2dd-000c293b01bd}\
   Shadow Copy Storage volume: (E:)\\?\Volume{0e3bf713-125d-11e3-b2dd-000c293b01
bd}\
   Used Shadow Copy Storage space: 0 B (0%)
   Allocated Shadow Copy Storage space: 0 B (0%)
   Maximum Shadow Copy Storage space: 149.999 GB (30%)
Shadow Copy Storage association
   For volume: (C:)\\?\Volume{a9fb0475-f1bd-11e0-b235-806e6f6e6963}\
   Shadow Copy Storage volume: (C:)\\?\Volume{a9fb0475-f1bd-11e0-b235-806e6f6e69
63}\
   Used Shadow Copy Storage space: 0 B (0%)
   Allocated Shadow Copy Storage space: 0 B (0%)
   Maximum Shadow Copy Storage space: 4.99 GB (7%)
Hope this might also help you experts to get a little more information.

0xC0380013 error while restoring Windows Server 2008 R2 backup

Hello!
I have a Bare Metal Backup from phisical mashine with Windows Server 2008 R2 system. The machine has a 500GB disk with 200GB system volume. The disk is configured as dynamic.
I also have prepared Virtual Mashine with 600GB disk, where I want to restore the backup.
When I start procedure of restoring (using WinRE) i receive following error:
0xC0380013 "There is not enough usable space for this operation".
What is the reason of this error. How should I proceed to recover dynamic disk to virtual machine?
Thanks for your suggestions!

Hi,
On current situation, please refer to following KB and check if can help you.
"A required CD/DVD drive device driver is missing" or "A media driver your computer needs is missing" error message when you install Windows
In addition, please check your system BIOS settings. Please refer to following thread and check if can help you.
A required CD/DVD drive device driver is missing.....
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Windows Server 2008 R2 Backup Fails with error "Parameter is Incorrect"

When i try to take backup of Windows Server 2008 R2 and Windows Storage server 2008 to External hard drive. It gives error "Parameter is incorrect".
Am taking full Server backup from server backup utility. Backup includes (System State, Bare metal recovery and 5 local drivers). Full back size is 1.2TB.

Hi,
Can you post unedited error event log related to VSS from application log? Are you using windows server backup tool? If yes, please post error event log from "Applications ans Services Logs\Microsoft\Windows\Backup "
Thanks,
Umesh.S.K

Time Machine doesn't work with Windows Server 2008

At work we use a Windows Server running with Windows Server 2008 to backup our work via Time Machine. All my collegues are running Snow Leopard appart from on that runs under Leopard because it's a G5.
A few weeks ago I installed Lion to try it before upgrading all the computer and found that time machine won't work. Apperantly I found that it is due to an AFP connection.
Can anyone tell me if I can do anything apart from trying to use another Backup Software like Data Backup?
Would really like to use Time Machine as it's SUPERB ;-)
Regards

Perhaps that drive is too small to use for Time Machine. Your Time Machine drive needs to be at least twice the size of the drive it is backing up, preferably 3 times.

How to backup VM in HyperV (Windows Server 2008 R2)

Hello,
Beginner's question: How to backup my VMs on an external
USB disk?
NB: I'm running Windows Server 2008 R2. It's a test machine, don't care with downtime. I want to backup only the VM (VHD files and VM configuration, not the whole server)
Thanks

Hello,
for Hyper-V usage please ask the experts in
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverhyperv
Also see
http://technet.microsoft.com/en-us/library/dd405549(v=vs.85).aspx
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

How to schedule multiple backup job through windows server backup in windows server 2008 R2

hi expert,
need your help, In my small environment I am using windows 2008 R2 as a domain controller. and installed windows server feature for backup.
Now i want to create backup at a different time.
1. System state backup at 5.00 PM on saturday only
2. finance and hr data backup on daily basis at 5.00 PM.
so how i create different job schedule through windows server backup.
Regards,
Triyambak
Regards, Triyambak

Scenario #1
The following command will create a Task Scheduler task named
DailyFolder1Backup with the start time of 23:00.
This task will run DAILY with the HIGHESTprivileges. It will run the Windows Server Backup CLI to backup
g:\folder1 to target volume
F:.
SCHTASKS /Create /SC DAILY /TN
DailyFolder1Backup /RL HIGHEST /ST 23:00/TR
"wbadmin start backup –backupTarget:F: -include:g\folder1
-vsscopy -quiet"
Scenario #2
The following command will create a Task Scheduler task named
DailyFolder2Backup with the start time of 24:00.
This task will run DAILY with the HIGHESTprivileges. It will run the Windows Server Backup CLI to backup
h:\folder2 to target volume
F:.
SCHTASKS /Create /SC DAILY /TN
DailyFolder2Backup/RL HIGHEST /ST 24:00/TR
"wbadmin start backup –backupTarget:F: -include:h:\folder2
-vsscopy -quiet"
Please feel free to let us know if you have any question or concern.
Please VOTE as HELPFUL if the post helps you and remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Windows Server 2008 backups failing

I have a Windows Server 2008, fully patched that backups recently started to fail and now, we are unable to open the Windows Server Backup. Also unable to open Disk Management or any other applications requiring Virtual Disk.
Attempts to start VDS from service or command line result in the following errors:
1:
A timeout was reached (180000 milliseconds) while waiting for the Virtual Disk service to connect.
2:
The Virtual Disk service failed to start due to the following error: The service did not respond to the start or control request in a timely fashion.
I added the debuglog to registry and the $vds$.log only records the following:
(PID:8988,TID:10060,17:32:43) ERROR: CVdsLoader::LoadService, 3, hr=8007041D
I have also increased the timeout dramatically to no avail.
SFC /scannow returns:
Windows Resource Protection found corrupt files but was unable to fix some of them.
Nothing requiring Virtual Disk Service will operate making backups and imaging impossible.
Any thoughts?

Hi,
As SFC could find some issues (but fail to fix), please try to DISM could help as well:
DISM.exe /Online /Cleanup-image /Restorehealth
Fix Windows corruption errors by using the DISM or System Update Readiness tool
http://support.microsoft.com/kb/947821
Also though the following hotfix is not specific for this error, it helps updating VDS components. Please try it and see if issue persists after installing it.
Virtual Disk Service (VDS) crashes when you try to extend a dynamic volume in an NTFS file system on a computer that is running Windows Vista, Windows Server 2008, Windows Server 2008 R2, or Windows 7
http://support.microsoft.com/kb/975680
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Backed up files partially disappear after restore (Windows Server 2008 R2 - Windows Server Backup)

Dear all,
I am experiencing a problem with "Windows Server 2008 R2", using Windows Server Backup.
Here's my setup:
Server: RAID 5 Disk setup
Backup:
By using Windows Server Backup (within Windows Server 2008 R2), C: and D: were fully backed up, with "System State" and "Baremetal Recovery" options selected. Backup went okay without any errors.
Restore:
By using Windows Recovery Environment (booted from Windows Server DVD), C: and D: were fully restored to the original partitions with "System Recovery" option found within Windows RE (without re-formatting partitions during restore). Restore
went OK without any errors. Rebooted, and system has been running fine.
Problem:
After the restore, the system itself seems running OK; no BSOD, no crash, no visible errors.
However, our client insisted some files (around 6 to 7) which are related to the propriety software has "disappeared" right after System Recovery.
Question:
Since Windows Server Backup is using "Volume Shadow Copy" technology which enables "live backup" of the running system, is it possible that some files will disappear (=restore error) after
System Recovery?
I cannot really find any errors or warnings related to Windows Server Backup in the event log, through. No Windows-backup errors. No VSS errors, too.
Do anybody have experienced this kind of problem in the past? Any suggestion will be greatly appreciated.

Thank you for your reply, Ms. Mandy.
To make things clear, let me explain to you briefly:
1. The "missing data" was backed up with "full system backup".
2. After a system restore from the above backup image, as you mentioned, partitions has been overwritten with the partions' backup data in the Backup Data Set taken by Windows Server Backup. No error with backup. No error after restore, and reboot - system
has been running fine.
3. Although there was a report that the affected files(about 7 java exectables) were missing after the above restore operation, other aspect of system was running fine at the time of the report.
4. I have checked the original backup data set - and voila, there ARE files which seems to gone after restore.
5. When I used Windows Server Backup "on" Windows Server 2008 R2 normal environment (= NOT Recovery environment from DVD) and selectd ONLY these affected files to restore, these files could be RESTORED successfully, without any errors. SO... data
was property backed up.
> The recovery will overwrite the partitions so files created after the backup point will be missing.
I understand, and this is not the case this time, because the affected files are already present in the backup data set (= I have mounted the backup data as VHD, and I could clearly see them present in the mounted VHD file)
Plus, these files are completely restoreable via "selective file restore" in Windows Server Backup.
Things I want to know/confirm:
> The recovery will overwrite the partitions
If I understand this correctly, in case that the files in question are already present in the backup data set, these files SHOULD be restored after full system restore, right? (If these files could not be restored, Windows Server Backup SHOULD show some errors.)
What do you think, Ms. Mandy? :)
Jo

Backup Error : The Data Is Invalid Windows Server 2008 R2

Hello,
I have a Problem when I try to make Backups to Partition C in Windows Server 2008 R2:
Error The Data is Invalid.
Obs: I can make backups for System Reserved Partition .
I had the same problem 2 months ago (the data is invalid), Then I folowed this the advice to delete "Framework64\v2.0.50727\Temporary
ASP.NET Files" and worked for me , from this post: http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/89052b85-9c9b-479f-ab76-a20da3cc4696
Now I have the same problem and I delete the
Temporary ASP.NET Files , but it is not working , I received the same error on backup:
"The backup operation that started at '‎2012‎-‎09‎-‎20T07:13:26.024163900Z' has failed with following error code '2147942413'. Please review the event details for a solution, and then rerun the backup operation once the issue is resolved."
When I try vssadmin list writers, Everything is ok , "No error" .
I tried to run :
net stop "System Event Notification Service"
net stop "COM+ Event System"
net stop "Microsoft Software Shadow Copy Provider"
net stop "Volume Shadow Copy"
cd /d %windir%\system32
net stop vss
net stop swprv
regsvr32 /s ole32.dll
regsvr32 /s oleaut32.dll
regsvr32 /s vss_ps.dll
vssvc /register
regsvr32 /s /i swprv.dll
regsvr32 /s /i eventcls.dll
regsvr32 /s es.dll
regsvr32 /s stdprov.dll
regsvr32 /s vssui.dll
regsvr32 /s msxml3.dll
net start "System Event Notification Service"
net start "COM+ Event System"
net start "Microsoft Software Shadow Copy Provider"
net start "Volume Shadow Copy"
But is not Working
Any Advice ?
Thank's

Hello Lucian,
the issue may be caused by an invalid entry inside the following registry sub tree.
HKey_Local_Machine\Software\Microsoft\Windows NT\CurrentVersion\ProfileList
Please open the registry editor with regedit.
Expand and local to the subtree, check if there is an entry that has a ".bak" value appended. If so, this may be cause the failure when trying to resolve the SID of the writer.
Please backup the registry key first, and then delete that entry with the extra ".bak" and reboot the server then test the backup
Run the command "vssadmin list writers" and make sure all the writers are stable with no errors
Please look for errors in application event logs after you initiate backup on the server
Sincerely, Asifkhan -- Please mark my post helpful if it was really helpful to you.

Backup Problem in Windows Server 2008 R2 std SP1

I have taken backup of Windows Server R2 std SP1 from Server Manager it is around 16gb .vhd file from Server Computer
When I am restoring in other Server PC of Windows server R2 std sp1 from Server Manager it is giving message backup not found.
Why this message is coming? I cant restore it?

Hi,
If you restore a Windows Server 2008 R2 to a new hardware, you need to perform a Bare Metal Restore and the two physical computer must have the same make, model, and configuration (identical hardware).
For more detailed information, please refer to the article below:
How to restore a Windows installation or move it to different hardware
http://support.microsoft.com/kb/249694/en-us
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

What is the easiest way to replicate(backup) a VM whose host is Windows Server 2008 R2?

I have a Windows Server 2008 R2 Hyper-V Manager and I have a Domain Controller as VM (which is running Server 2012 R2) and I would like to enable replicationfor this VM(I want to back up the Domain Controlloer).
Could you please tell me the easiest way of doing this?
Thanks,
Radu

Hi, Radu,
From my perspective, in this case the backup/replication solution should:
Perform image-level backup, as it’s always preferable to use such method for backing up/replicating virtual machines.
Guarantee application consistency. That’s being said, not only should it backup VMs running special application in consistent (VSS-aware) mode, but also it should apply
application-specific settings to prepare each application to perform
VSS-aware restore on the next VM startup.
Support 2012 R2 platform.
We’re using Veeam for the same purposes, as it does have abovementioned functionality. Though, you can stick to whatever solution that can boast with the listed options.
Kind regards, Leonardo.

Windows Server 2008 R2 System State Backup fails "the parameter is incorrect"

Hi,
I'm having the same problem as I've found in a few other threads.
http://social.technet.microsoft.com/forums/en-us/windowsbackup/thread/C633B2E6-1161-4146-BC09-C2712231F0EE
and
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/0b0f2d9c-e3b1-4f85-a6d2-2e15e5a15bc1
I've tried running the vshadow.exe -wm2 > out.txt command and searching the output for invalid paths, but I can't seem to find any paths that looks incorrect.
I've also done a registry search under HKLM\CurrentControlSet\Services for the / character and didn't come up with any in any paths either.
The server is a pretty new install. DC, DNS, DHCP, File and Print services. It has been running in production for about a week for a small business. Their previous server desperately needed changing over, so it got pushed in fairly quick. I never assumed
I would have had trouble with the system state backing up!. It would be nice to get it working so I can sleep at night :). The old DC is still running, so all is not lost in a failure, but still... I guess also once I've demoted the old DC, I can restore AD
just by restoring the entire system image (Don't have to worry about USN sync if only single DC), but I would still like a system state backup.
Thanks, Ryan

Hi,
Try to apply the following hotfix.
System state backup error in Windows Server 2008, in Windows Vista, in Windows 7 and in Windows Server 2008 R2: "Enumeration of the files failed"
http://support.microsoft.com/kb/980794
You may have to restart the computer after you apply this hotfix.
Jeff Ren TechNet Community Support beneficial to other community members reading the thread.

Restore bkf Backup Files on Tape with Windows Server 2008 R2

We have to migrate an application from a legacy server (OS Windows Server 2003) to a new server (OS Windows Server 2008 R2).
Due to legal obligations we have to keep backups for 10 years. Until now NTBACKUP was used to store the data on tape.
We must be able to restore data from tapes of the last 10 years for audit purposes.
We installed Update für Windows Server 2008 R2 x64 Edition (KB974674) containing NTBackup-RestoreUtility on the new server.
It seems that this tool is not able to restore from tapes.
How can we fullfil the legal requirements to restore backuped data from tape on Windows Server 8 R2 (and in future with Windows Server 2012 R2)?

Hi,
This is Exchange server forum. Actually, we have a dedicated support team regarding the Microsoft Windows Server. I recommend you ask your question on our Windows Server forum which is staffed by more experts specializing in this kind of problems. Thanks
for your understanding.
For your convenience:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?category=windowsserver
Hope it helps.
If you have any problem with Exchange server, welcome to our Exchange server forum.
Best regards,
Amy Wang
TechNet Community Support

Error 0x80070543 when activate Windows Server 2008 Backup Features

Hi, When I try to activate the Window Server 2008 Backup Features, the system prompt me an error. please review below message appear at event viewer. Not sure how it happen / solve it?
"Installation failed.
Features:
Windows Server Backup Features
Error: Attempt to install Windows Server Backup failed with error code 0x80070543. Cannot open an anonymous level security token
Error: Attempt to install Command-line Tools failed with error code 0x80070543. Cannot open an anonymous level security token"

Hi,
Have you checked the link Simon provided? Any progress?
For your information, the Servermanager.msc is dependent on the .NET framework. Any improper modification of the "Default Authentication Level" will cause the COM
modules related to .NET framework abnormal. When we attempt to install of Roles and Features to impersonate as ANONYMOUS LOGON, this security context doesn’t have permission on any of the System Folders and hence we are failing with the above error listed.
To fix the issue, please configure the related settings to default as the KB971509 suggested.
Thanks.
Nina
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Windows server 2008 r2 backup

Similar Messages

Maybe you are looking for