Windows Server 2008 R2 DNS Entry Auto remove not working

Dear All,
I have configured DNS Ageing for 30 days removal of unwanted host entry.but it will not work.
Active directory DNS having all unwanted host in forward lookup zone and as well as reverse lookup zone.
how to solve this ?
pls help
Sunil
SUNIL PATEL SYSTEM ADMINISTRATOR

Hi,
This is a rather common problem when configuring Scavenging and Aging of stale DNS entries. This has to be set in two spots, not just one as so many admins have difficulties with. It isn't very obvious.
Aging and Scavenging must be set on both the DNS Server and on the Zone
that you want to clean. In addition, DNS needs to be Active Directory integrated and resource records need to be dynamically registered. Static entries are ignorned.
First step:
To set aging and scavenging properties for the DNS Zones using the Windows interface
Open DNS Manager.
In the console tree, right-click the applicable DNS server, and then click
Set Aging/Scavenging for all zones.
Select the Scavenge stale resource records check box.
Modify other aging and scavenging properties as needed.
Second Step:
To set aging and scavenging properties for the DNS Server using the Windows interface
Open DNS Manager.
In the console tree, right-click the applicable DNS server, and then click
Properties.
Select the Advanced tab,and then enable Enable automatic scavenging of stale records
check box. Once done, specify the Scavenging period (That is recurring
interval for Scavenging on a DNS server) and click on OK
That will do it. Your DNS entries will then start auto scavenging based on the times you have determined. Word of caution - do not set your aging too aggressively - I have seen where an admin had set aging down to 1 day and when it finally kicked
off, nearly brought the company to a halt.

Similar Messages

Cold fusion 9 Installation on Windows server 2008 (IIS 7.0) - IIS websites not working ?

I am having a 64 bit machine on which windows server 2008 R2 is installed. IIS 7.0 is configured and running on it. on which I have my organisations main website. I have to install Cold fusion on this machine as some of my site pages are designed with CF.
I used all the default settings for installing cold fusion 9. It got completed succefully. But after I restarted my system and tried accesing my ASP.net website it was not loading the page. Text getting displayed was only as follows '<script> src="'. Later I unsistalled CF and my site was working fine.
Please can any one guide me to successfully install Cold fusion without disturbing my main site deployed on IIS ?

Sarfarajms, I don't recognize what about the CF install would conflict with ASP.NET, but I'll note this:
If you downloaded CF 9 recently, you are still running 9.0--which does NOT formally support IIS 7. If you followed the steps about enabling IIS 6 compatibility and such (in the install guide or some blog entry), perhaps that caused the conflict.
Instead, you will want to install 9.0.1 (CF 9 Updater 1, which is NOT provided in the current 9.0 install). THAT is the first release to formally support IIS 7. And if you read the updater installation guide (http://www.adobe.com/support/documentation/en/coldfusion/901/cf901install.pdf), it discusses how to deal with the upgrade depending on what you had done with respect to IIS, starting at the bottom of its page 8.
Hope that helps.
/charlie

Windows Server 2008 R2 DNS service issue with BitLocker

I recently installed BitLocker on a Windows Server 2008 Platform. I did not encrypt the boot partition because the server hardware BIOS did not have the necessary requirements to encrypt the system drive.
The Server roles are ADSM, DC and File Server. For DC operation I am also running the DNS service.
When I installed the DNS role I was prompted to install the Log files on a different volume than the OS. I did this, but unfortunately, it was the same volume that was encrypted.
Since I could not encrypt the system disk, the encrypted volume must be unlocked via password in order to mount. Here in lise my problem.
When I do a full reboot of the server, I get to the point in the boot process where my mouse is visible and operational (this would be just before the Windows OS logo displays, I believe), then the server reboots. On the next boot up I am given the diagonstics
and recovery dialog because the OS failed to boot.
I believe the failure is the DNS service trying to launch, but because the log files are on the encrypted drive and it has not been unlocked, the system sees this as a security problem and reboots
Does this make sense? If it does, is there a way to boot 2008 R2 with the DNS service disabled, say with the original install disk in recovery mode?
Any help would be greatly appreciated as this system cannot be booted in its current state.
Peter C. Hesse Network/Systems Administrator

Hi,
I believe you mean the Active Directory Logs not the DNS logs, because these are necessary to startup a domain controller, because the AD database depends on these logs.
So if you have AD logs on a different partition and that is encrypted with Bitlocker you could probably automatically unlock it.
So you did not encrypt OS partition because the server does not have a TPM fully compliant chip ?
manage-bde /?
manage-bde -autounlock -enable Driveletter:
But you have to be able to boot server normal mode I am not sure if the command can be used in DSRM mode.
Below are some links that might help:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/c52ffc7d-f822-4b61-b633-46f8e04eac80/bitlocker-for-domain-controller
Hope this helps.
Regards,
Calin

Windows Server 2008 R2 Logical Disk monitor is not listed in SCOM 2012

Dear Experts,
I tried to create an override of Logical Disk space threshold value changes on one of Windows 2008 R2 OS, But unable to find the respective monitor of 'Windows Server 2008 R2 Logical Disk' monitor in the scope, But I can see Windows Server 2008 Logical
Disk monitor is there and if I do right-click create override the monitor for particular specific of Windows server 2008 computers then the Windows 2008 R2 computer is not displaying there. Finally I found Windows Server 2008 R2 Logical Disk monitor is
missing ?
Can you please help me to achieve this ?
Saravana Raja

Hi,
Same issue/question in this thread:
https://social.technet.microsoft.com/Forums/en-US/15f634e2-57d7-4f57-b579-61e5ee6a01a2/monitor-hard-drive-space-windows-2008-r2?forum=operationsmanagergeneral
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Unable to install the security patches KB2677070 in Windows Server 2008 R2 SP1 (The update is not applicable to your computer)

Dear everyone,
We are trying to install the below KB in our windows server 2008 R2 SP1, however, it will show "The update is not applicable to your computer". There is no problems to install the other patches except this one. Do anyone have idea about it?
http://support.microsoft.com/kb/2677070
Thanks,
Users

Hi,
According to this KB article, there are many exceptions where this KB is not applicable.
Please perform the following steps:
Expand the “For all supported…” title in the File Information section in the KB article.
Find Crypt32.dll.mui files on your machine.
Then compare the file version, file size, data and time with the ones listed in the KB article.
If there is a match, then this KB doesn’t apply to your machine, which is by design.
Hope this helps.
Best Regards,
Amy Wang

Multi Question: Windows Server 2008 NFS client / NTFS/FAT32 Disk not seen..

1) Sharing an NFS export with Windows server 2008, HowTo Please?
2) I have a second IDE disk installed in the system but solaris doesnt see it and i dont konw how to find it as im a linux guy and alot of the tools arnt the same. This disk contains one FAT32 partition which i presume wont be a problem but also contains an NTFS partition. Ideas / Instructions please?
3) The system also has a second, Gb, D-Link DGE-528T Ethernet card. This also isnt recognised atall in anything i can think of.
I know these are all fairly basic questions for this forum but i would appreciate the advice of some experts, thankyou for your time.
Edited by: Bolster on Jul 25, 2008 11:48 AM to add network card details

Hi,
Do you mean that USB drives to and mounted VHDs all cannot be formatte? If so, please first check if the disks can work on another computer.
If it can work properly on another computer, please refer to the the similar thread to troubleshoot the issue:
Virtual disk manager - can't initialise external hard drive
http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/virtual-disk-manager-cant-initialise-external-hard/42b81b58-13be-4e39-b59e-3c3fe2df6962
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows Server 2008 AD & DNS issue

Hi Guys,
I have an Server 2008 ADDS enviroment with this DC-s:
"List of domain controllers with accounts in the domain:
WTEHU001 (powered off)
WTEHU003 (powered off)
ZEUS
MINERVA
GYAL-DC1
The command completed successfully."
When I change from google dns (8.8.8.8) to local DNS address (127.0.0.1) on DNS entries of NIC of Server, I get error messages:
"The DNS server is waiting for Active Directory Domain Services (AD DS) to signal that the initial synchronization of the directory has been completed. The DNS server service cannot start until the initial synchronization is complete because critical
DNS data might not yet be replicated onto this domain controller"
DNS service is unavailable on this situation.
With google DNS on server's NIC, local DNS service is available and nslookup is working on local machines:
"nslookup zeus
Kiszolgáló: zeus.wtehu.local
Address: 10.31.7.6
Név: zeus.wtehu.local"
But, I get this error message with "dcdiag /test:dns"
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = ZEUS
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\ZEUS
Starting test: Connectivity
The host 57650e4a-f396-4929-92f0-cf1adb2bba95._msdcs.wtehu.local could
not be resolved to an IP address. Check the DNS server, DHCP, server
name, etc.
Got error while checking LDAP and RPC connectivity. Please check your
firewall settings.
......................... ZEUS failed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\ZEUS
Starting test: DNS
DNS Tests are running and not hung. Please wait a few minutes...
......................... ZEUS passed test DNS
Running partition tests on : ForestDnsZones
Running partition tests on : DomainDnsZones
Running partition tests on : Schema
Running partition tests on : Configuration
Running partition tests on : wtehu
Running enterprise tests on : wtehu.local
Starting test: DNS
Test results for domain controllers:
DC: ZEUS.wtehu.local
Domain: wtehu.local
TEST: Basic (Basc)
Error: No LDAP connectivity
Warning: adapter
[00000008] Broadcom BCM5716C NetXtreme II GigE (NDIS VBD Client)
has invalid DNS server: 8.8.8.8 (<name unavailable>)
Error: all DNS servers are invalid
No host records (A or AAAA) were found for this DC
TEST: Delegations (Del)
Error: DNS server: wtehu001.wtehu.local. IP:10.31.7.200
[Broken delegated domain _msdcs.wtehu.local.]
TEST: Dynamic update (Dyn)
Warning: Failed to add the test record dcdiag-test-record in zone wtehu.local
TEST: Records registration (RReg)
Error: Record registrations cannot be found for all the network
adapters
Summary of test results for DNS servers used by the above domain
controllers:
DNS server: 8.8.8.8 (<name unavailable>)
2 test failure on this DNS server
Name resolution is not functional. _ldap._tcp.wtehu.local. failed on the DNS server 8.8.8.8
DNS server: 10.31.7.200 (wtehu001.wtehu.local.)
1 test failure on this DNS server
PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DNS server 10.31.7.200
Summary of DNS test results:
Auth Basc Forw Del Dyn RReg Ext
Domain: wtehu.local
ZEUS PASS FAIL PASS FAIL WARN FAIL n/a
......................... wtehu.local failed test DNSs
Replication test output:
Repadmin: running command /showrepl against full DC localhost
Default-First-Site-Name\ZEUS
DSA Options: IS_GC
Site Options: (none)
DSA object GUID: 57650e4a-f396-4929-92f0-cf1adb2bba95
DSA invocationID: 20c20b47-dcb3-437b-a316-b0639f90b753
==== INBOUND NEIGHBORS ======================================
DC=wtehu,DC=local
Default-First-Site-Name\WTEHU001 via RPC
DSA object GUID: 5a8cc029-a880-44c1-b3e3-92961fd4d74d
Last attempt @ 2014-01-05 09:46:29 failed, result 8524 (0x214c):
The DSA operation is unable to proceed because of a DNS lookup failure.
23 consecutive failure(s).
Last success @ 2014-01-04 10:07:35.
Default-First-Site-Name\WTEHU003 via RPC
DSA object GUID: 7559995a-cd48-4d43-972e-1492f4c56fd4
Last attempt @ 2014-01-05 09:47:11 failed, result 8524 (0x214c):
The DSA operation is unable to proceed because of a DNS lookup failure.
345 consecutive failure(s).
Last success @ 2014-01-04 10:15:23.
Default-First-Site-Name\GYAL-DC1 via RPC
DSA object GUID: c006625c-244b-4710-a55e-812a764a019b
Last attempt @ 2014-01-05 09:47:17 failed, result 8524 (0x214c):
The DSA operation is unable to proceed because of a DNS lookup failure.
302 consecutive failure(s).
Last success @ 2014-01-04 10:33:17.
Default-First-Site-Name\MINERVA via RPC
DSA object GUID: ad0ee6cf-2f73-4b98-80c3-2cd4693d749d
Last attempt @ 2014-01-05 09:52:05 was successful.
CN=Configuration,DC=wtehu,DC=local
Default-First-Site-Name\WTEHU001 via RPC
DSA object GUID: 5a8cc029-a880-44c1-b3e3-92961fd4d74d
Last attempt @ 2014-01-05 09:46:35 failed, result 8524 (0x214c):
The DSA operation is unable to proceed because of a DNS lookup failure.
23 consecutive failure(s).
Last success @ 2014-01-04 09:53:07.
Default-First-Site-Name\GYAL-DC1 via RPC
DSA object GUID: c006625c-244b-4710-a55e-812a764a019b
Last attempt @ 2014-01-05 09:46:41 failed, result 8524 (0x214c):
The DSA operation is unable to proceed because of a DNS lookup failure.
29 consecutive failure(s).
Last success @ 2014-01-04 09:53:08.
Default-First-Site-Name\WTEHU003 via RPC
DSA object GUID: 7559995a-cd48-4d43-972e-1492f4c56fd4
Last attempt @ 2014-01-05 09:46:47 failed, result 8524 (0x214c):
The DSA operation is unable to proceed because of a DNS lookup failure.
30 consecutive failure(s).
Last success @ 2014-01-04 09:53:07.
Default-First-Site-Name\MINERVA via RPC
DSA object GUID: ad0ee6cf-2f73-4b98-80c3-2cd4693d749d
Last attempt @ 2014-01-05 09:46:47 was successful.
CN=Schema,CN=Configuration,DC=wtehu,DC=local
Default-First-Site-Name\WTEHU001 via RPC
DSA object GUID: 5a8cc029-a880-44c1-b3e3-92961fd4d74d
Last attempt @ 2014-01-05 09:46:53 failed, result 8524 (0x214c):
The DSA operation is unable to proceed because of a DNS lookup failure.
23 consecutive failure(s).
Last success @ 2014-01-04 09:53:08.
Default-First-Site-Name\MINERVA via RPC
DSA object GUID: ad0ee6cf-2f73-4b98-80c3-2cd4693d749d
Last attempt @ 2014-01-05 09:46:53 was successful.
Default-First-Site-Name\GYAL-DC1 via RPC
DSA object GUID: c006625c-244b-4710-a55e-812a764a019b
Last attempt @ 2014-01-05 09:46:59 failed, result 8524 (0x214c):
The DSA operation is unable to proceed because of a DNS lookup failure.
24 consecutive failure(s).
Last success @ 2014-01-04 09:53:08.
Default-First-Site-Name\WTEHU003 via RPC
DSA object GUID: 7559995a-cd48-4d43-972e-1492f4c56fd4
Last attempt @ 2014-01-05 09:47:05 failed, result 8524 (0x214c):
The DSA operation is unable to proceed because of a DNS lookup failure.
24 consecutive failure(s).
Last success @ 2014-01-04 09:53:08.
DC=DomainDnsZones,DC=wtehu,DC=local
Default-First-Site-Name\WTEHU001 via RPC
DSA object GUID: 5a8cc029-a880-44c1-b3e3-92961fd4d74d
Last attempt @ 2014-01-05 09:46:29 failed, result 1256 (0x4e8):
The remote system is not available. For information about network troubleshooting, see Windows Help.
23 consecutive failure(s).
Last success @ 2014-01-04 09:58:05.
Default-First-Site-Name\GYAL-DC1 via RPC
DSA object GUID: c006625c-244b-4710-a55e-812a764a019b
Last attempt @ 2014-01-05 09:46:41 failed, result 1256 (0x4e8):
The remote system is not available. For information about network troubleshooting, see Windows Help.
42 consecutive failure(s).
Last success @ 2014-01-04 09:57:52.
Default-First-Site-Name\WTEHU003 via RPC
DSA object GUID: 7559995a-cd48-4d43-972e-1492f4c56fd4
Last attempt @ 2014-01-05 09:46:47 failed, result 1256 (0x4e8):
The remote system is not available. For information about network troubleshooting, see Windows Help.
43 consecutive failure(s).
Last success @ 2014-01-04 09:58:07.
Default-First-Site-Name\MINERVA via RPC
DSA object GUID: ad0ee6cf-2f73-4b98-80c3-2cd4693d749d
Last attempt @ 2014-01-05 09:47:17 was successful.
DC=ForestDnsZones,DC=wtehu,DC=local
Default-First-Site-Name\WTEHU001 via RPC
DSA object GUID: 5a8cc029-a880-44c1-b3e3-92961fd4d74d
Last attempt @ 2014-01-05 09:46:29 failed, result 1256 (0x4e8):
The remote system is not available. For information about network troubleshooting, see Windows Help.
23 consecutive failure(s).
Last success @ 2014-01-04 09:53:08.
Default-First-Site-Name\GYAL-DC1 via RPC
DSA object GUID: c006625c-244b-4710-a55e-812a764a019b
Last attempt @ 2014-01-05 09:46:41 failed, result 1256 (0x4e8):
The remote system is not available. For information about network troubleshooting, see Windows Help.
25 consecutive failure(s).
Last success @ 2014-01-04 09:53:08.
Default-First-Site-Name\WTEHU003 via RPC
DSA object GUID: 7559995a-cd48-4d43-972e-1492f4c56fd4
Last attempt @ 2014-01-05 09:46:47 failed, result 1256 (0x4e8):
The remote system is not available. For information about network troubleshooting, see Windows Help.
25 consecutive failure(s).
Last success @ 2014-01-04 09:53:08.
Default-First-Site-Name\MINERVA via RPC
DSA object GUID: ad0ee6cf-2f73-4b98-80c3-2cd4693d749d
Last attempt @ 2014-01-05 09:47:17 was successful.
DsReplicaGetInfo() failed with status 8453 (0x2105):
Replication access was denied.
DsReplicaGetInfo() failed with status 8453 (0x2105):
Replication access was denied.
Regards,
Gabor

Public DNS servers should not be used in IP settings of DCs. You need to configure them as forwarders instead. Also, I would recommend using your ISP DNS servers instead of Google ones.
For the recommendation of IP settings to be used on DCs, please refer to what is written in this Wiki article: http://social.technet.microsoft.com/wiki/contents/articles/18513.active-directory-replication-issues-basic-troubleshooting-steps-single-ad-domain-in-a-single-ad-forest.aspx
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Get Active Directory User Last Logon
Create an Active Directory test domain similar to the production one
Management of test accounts in an Active Directory production domain - Part I
Management of test accounts in an Active Directory production domain - Part II
Management of test accounts in an Active Directory production domain - Part III
Reset Active Directory user password

Windows 7 / 2008 R2 GPO for Screen timeout not working.

What a joke. Why can't I get a simple screen saver to work VIA gpo with Windows 7 / 2008 R2? What is the fix?
User Config\admin templates\control panel\Personalization---Enable Screen Saver - Enabled, Prevent Changing Screen Saver -Enabled, Password protect the the screen saver - Enabled, Screen Saver Timeout - Enabled.
Number of seconds to wait to enabled scrren saver = 600 seconds.
I have verified these settings via RSOP.msc and group policy modeling. What do I need to get this working!
HELP WITH THIS SIMPLE TASK PLEASE!!!!!!!!!!!!!!!!!!!!

Hi Dave Santel,
Please run the following command on the problematic workstation.
Gpresult /h > %temp%\gpresult.html (“%temp%”
is the path of the gpresult.html, you can set it yourself)
Please check this file gpresult.html which is used for checking the resultant of Group Policy information to see if the GPO has applied.
Regards,
Lany Zhang

Windows Server 2008 R2 Backup failing with error - 0x8004231F

Hi,
I have Windows Server 2008 R2 Web Edition. Everything was working fine until recently. I tried checking for the log files, but I see that there are no log files that are created now in the location C:\Windows\Logs\WindowsServerBackup. The only files that
are being created recently are of the type mentioned below.
Wbadmin.1.etl
WbadminUI.0.etl
etc.
I tried removing the old backup and starting a new backup. But, even now it is failing with the same error.
When running the backup from the PowerShell, the output is as below.
PS C:\Users\administrator> Wbadmin start backup -backupTarget:\\localhost\E$\WindowsImageBackup\Server01 -systemState -vss
Copy
wbadmin 1.0 - Backup command-line tool
(C) Copyright 2004 Microsoft Corp.
Note: The backed up data cannot be securely protected at this destination.
Backups stored on a remote shared folder might be accessible by other
people on the network. You should only save your backups to a location
where you trust the other users who have access to the location or on a
network that has additional security precautions in place.
Retrieving volume information...
This will back up volume System Reserved (100.00 MB) (Selected Files),SAN(I:) (Selected Files),Local Disk(C:) (Selected
Files) to \\localhost\E$\WindowsImageBackup\Server01.
Do you want to start the backup operation?
[Y] Yes [N] No y
The backup operation to \\localhost\E$\WindowsImageBackup\Server01 is starting.
Starting to back up the system state [12/8/2013 9:29 AM]...
Creating a shadow copy of the volumes specified for backup...
Creating a shadow copy of the volumes specified for backup...
Creating a shadow copy of the volumes specified for backup...
Summary of the backup operation:
The backup of the system state failed [12/8/2013 9:30 AM].
Log of files successfully backed up:
C:\Windows\Logs\WindowsServerBackup\Backup-08-12-2013_09-29-49.log
Log of files for which backup failed:
C:\Windows\Logs\WindowsServerBackup\Backup_Error-08-12-2013_09-29-49.log
There is not enough disk space to create the volume shadow copy on the storage location. Make sure that, for all volumes
to be backup up, the minimum required disk space for shadow copy creation is available. This applies to both the backup
storage destination and volumes included in the backup.
Minimum requirement: For volumes less than 500 megabytes, the minimum is 50 megabytes of free space. For volumes more th
an 500 megabytes, the minimum is 320 megabytes of free space.
Recommended: At least 1 gigabyte of free disk space on each volume if volume size is more than 1 gigabyte.
ERROR - A Volume Shadow Copy Service operation error has
occurred: (0x8004231f)
Insufficient storage available to create either the shadow copy storage file or other shadow copy data.
If you see the free space available in each of the drives, they are in plenty.
C:\ 7.5 GB free of 70 GB
E:\ 250 GB free of 499 GB
I:\ 86.7 GB free of 350 GB
I am out of any hints on how I can proceed now. Has any one had similar issues? Can any one give any hint on this? Thanks.
Thanks.

Some Additional info.
Shadow Copy Storage association
   For volume: (\\?\Volume{a9fb0474-f1bd-11e0-b235-806e6f6e6963}\)\\?\Volume{a9f
b0474-f1bd-11e0-b235-806e6f6e6963}\
   Shadow Copy Storage volume: (\\?\Volume{a9fb0474-f1bd-11e0-b235-806e6f6e6963}
\)\\?\Volume{a9fb0474-f1bd-11e0-b235-806e6f6e6963}\
   Used Shadow Copy Storage space: 0 B (0%)
   Allocated Shadow Copy Storage space: 0 B (0%)
   Maximum Shadow Copy Storage space: 32 MB (32%)
Shadow Copy Storage association
   For volume: (I:)\\?\Volume{ddf6a51c-1282-11e3-b291-000c293b01d1}\
   Shadow Copy Storage volume: (I:)\\?\Volume{ddf6a51c-1282-11e3-b291-000c293b01
d1}\
   Used Shadow Copy Storage space: 0 B (0%)
   Allocated Shadow Copy Storage space: 0 B (0%)
   Maximum Shadow Copy Storage space: 35 GB (10%)
Shadow Copy Storage association
   For volume: (E:)\\?\Volume{0e3bf713-125d-11e3-b2dd-000c293b01bd}\
   Shadow Copy Storage volume: (E:)\\?\Volume{0e3bf713-125d-11e3-b2dd-000c293b01
bd}\
   Used Shadow Copy Storage space: 0 B (0%)
   Allocated Shadow Copy Storage space: 0 B (0%)
   Maximum Shadow Copy Storage space: 149.999 GB (30%)
Shadow Copy Storage association
   For volume: (C:)\\?\Volume{a9fb0475-f1bd-11e0-b235-806e6f6e6963}\
   Shadow Copy Storage volume: (C:)\\?\Volume{a9fb0475-f1bd-11e0-b235-806e6f6e69
63}\
   Used Shadow Copy Storage space: 0 B (0%)
   Allocated Shadow Copy Storage space: 0 B (0%)
   Maximum Shadow Copy Storage space: 4.99 GB (7%)
Hope this might also help you experts to get a little more information.

Download issue when Windows 7 Pro joins a Windows Server 2008 Active Directory

Hi,
I purchased 2 new Dell OptiPlex 3010 desktop computers that came with Windows 7 Professional operating system with SP1.
There were no Microsoft updates installed yet. After I added one of these Dell computers to the Windows Server 2008 Active Directory, I was not able to download several items.
Below are several examples:
1) I downloaded the Norton anti-virus installation file. This file is not the full installation of Norton; it is more of a file where you execute it and it will download the full installation from the Internet like from their Norton web
site. So when I executed this installation file, it does not download the full installation files.
It just hung at the screen saying “Downloading” and it will finally stop with an error (don’t remember the error message).
Note: If I have the full Norton installation file then I am able to install it on this computer with no problems.
2) I downloaded the Adobe Reader installation file. This file is not the full installation of Adobe Reader; it is more of a file where you execute it and it will download the full installation from the Internet like from their Adobe web
site. So when I executed this installation file, it hung at the downloading part and then it will error out with a “Actionlist Not Found” message.
Note: If I have the full Adobe Reader installation file then I am able to install it on this computer with no problems.
3) I installed Microsoft Office 2010 Standard version on this computer.
I configured Microsoft Outlook to retrieve emails from my email provider (pop and smtp settings).
After configuring Microsoft Outlook, I was able to send emails through Microsoft Outlook successfully (and very quickly), but he was unable to retrieve my emails. The progress bar for the Receiving in the "Outlook Send/Receive Progress" box
shows no progress. The Progress bar is not moving. There is a message at the bottom of Microsoft Outlook stating "Receiving message 1 of 6 (x.xx KB of x.xx MB)" and it is very slow. My new emails were not being retrieved at all.
I tried various pop and smtp servers that was available for my email provider, but all had the same effect.
4) I can access certain web sites (e.g.
www.yahoo.com, www.cnn.com) while I cannot access other web sites like
www.usatoday.com, my web hosting email site.
Note: I had a Dell computer with Windows XP Professional operating system and this computer does not have any of the above issues.
The above are only a few examples that I have experienced.
If I removed this Dell OptiPlex 3010 computer from the Windows Server 2008 Active Directory then I still experience the same issue.
So as another test, I setup the other new Dell OptiPlex 3010 with the same Windows 7 Professional OS with SP1.
This time, I did not join the Windows Server 2008 Active Directory and I was able to successfully download the full Norton installation files, download the full Adobe Reader installation files, download my emails from Microsoft Outlook 2010, etc.
But once I joined this computer to the Windows Server 2008 Active Directory then I am not able to download these files and emails at all.
It seems like there might be some group policy or a security setting that is preventing these downloads so I disabled the group policy on the Windows Server 2008 AD and Windows 7 Profession OS, but it didn’t resolve the issue.
I disabled all of the firewall programs on this Windows 7 Professional OS, but it still did not resolve the issue.
Since the Windows Server 2008 AD did not have DHCP installed, I installed DHCP and setup a scope.
Then configured the Windows 7 Professional OS to obtain an IP address, but it didn’t resolve the issue.
If I move this Windows 7 Professional computer to another network where it did not have any Active Directory; it just had a wireless router serving DHCP then everything works on the Windows 7 Pro computer.
Any ideas what is the root cause when a Windows 7 Professional computer join a Windows Server 2008 AD?
Thanks,
wl_tech

Hi,
Could you please tell some information for the AD environment and how it connect to the internet?
Regarding 3rd party installlers didn't work as expected, please also seek help in their offical website.
For outlook not receiving emails, could you please take a look in
Event Viewer and see if there are any special errors logged there?
And when trying to access the website like
www.usatoday.com, any special errors IE showed out?
Best regards
Michael Shao
TechNet Community Support

Windows Server 2008 Ent to Windows server 2012 R2 std Migration

Dear All,
We have windows server 2008 x64 Ent with SP2 it's working fine and perfectly . Presently we implemented new data center also we installed windows server 2012R2 Std . we would like to migrate windows form old data center to new data center .
I would like to tell you my current setup :
we have Windows 2008 Ent SP2 server 3 number all are GC domain controller it's working perfectly .
IP Address : 192.168.33.121 , 192.168.33.122 , 192.168.33.123
we have more than 2000 domain users and PC's all clients PC's are using static IP with domain DNS
My new data center Server windows 2012R2 STD
Static IP : 192.168.200.115
Here my doubt :
1. How can we migrate
2. how can we assign new DNS address to all clients more than 2000 PC's
Please could you tell me best way to solve this issue ..
Best Regards
Subash

Hello
tip:
1 check all old application, server /like old Linux samba, exch2003/ to support 2012 dc
2 all firewall add same rule as old DC /if have domain trust open firewall./
3 prompt to dc and gc the new server
4 check DNS server /DNS forwarder if have/ and AD logs
5 run BPA for AD and DNS
6 create gpo or startup script to add/change dns settings on client.
sorry my english

Installation & setting OBIEE 10.1.3.4.1 on Windows Server 2008 r2

Hi Gurus,
I am able to install the OBIEE software help of below thread.
OBIEE - Windows Server 2008
Then i face issues like not able to connect to ODBC and other then i googled i found the below link.
http://oraclebiblog.blogspot.com/2009/06/installing-obiee-on-64-bit-windows-os.html
I followed the steps given in this blog except set 2. a.) and b.) as i cant find the folders on the server.
The problem is Once i log in I am able to view the first report on my welcome page but i cant travers from one tab to another nor to different Dashboard. when i Click on the Edit dashboard i am able to. i am able to create go to answers But i cant go to the different dashboard pages. I have go to link on some of the dashboard pages with that help i can travers from one dashboard page to another. One more thing i noticed that Charts are not displaying and Conditional formating also not displaying. I dont no why something is working something not.
Please help me its very urgent and kind a risk of my J.
Regards
Ali
Edited by: @l**** on Apr 21, 2011 2:17 PM

Change the ODBC driver with OCI driver in the connection pool. Download and install oracle instant client if you don't have any Oracle fat client on the machine where is OBIEE.
Good tutorial to install oracle instant client:
http://www.dbatoolz.com/t/installing-oracle-instantclient-basic-and-instantclient-sqlplus-on-win32.html
don't forget to restart all OBIEE services...
Regards,
E.

Support for JDeveloper 10.1.3 on Windows Server 2008 64 bit OS

Hello,
We are using JDeveloper 10.1.3.3.0 (patch # 9879989) for R12.
Would like to know support for Jdeveloper on windows server 2008 - 64 bit.
Thanks,
Swati.

Hi Swati,
Currently I am using Jdeveloper Patch#9172975 for R12.1.2 on windows server 2008 X64 and it works fine.
As Jdeveloper Patch#9172975 is lower version then Jdeveloper Patch#9879989, Patch#9879989 should work on Windows Server 2008 64bit.
Still I am not confirm about Jdeveloper Patch#9879989 on Windows Server 2008 64bit.
Thanks,
Laukik

Windows Server 2008 CVE-2014-8730 vulnerability

We've received our monthly vulnerability scan results on our production servers running Windows Server 2008 R2.
They are showing vulnerability to TSL POODLE, which is the subject of CVE-2014-8730.
In this article on Qualys, there is mention that Windows Server 2008 is vulnerable but Microsoft have not taken any action yet:
https://community.qualys.com/blogs/securitylabs/2014/12/08/poodle-bites-tls
Microsoft - We've seen reports that some older platforms (e.g., Windows 2008) appear vulnerable, but no apparent patterns or reliable information so far.
Is there any update on this issue as it's an exploitable vulnerability we would like to remediate.
Thanks,
Lyndon.

Hi Vivian,
The article cited is about a different issue.
In October 2014 there was an SSL v3 POODLE vulnerability, we have resolved this issue by disabling SSL v3 (as recommended).
The article your posted specifically references that issue (the article was published in October 2014).
In December 2014 there was another POODLE vulnerability announced that affected the TLS protocol.
A lot of major vendors have published patches for this issue, but Microsoft are yet do do so (as far as I know).
Hence by original question that has not been answered yet.
Regards,
Lyndon.

Whats needed to install 10G 32 bit on Windows server 2008 R2 x64

Hello,
I cannot use 11g with what I need to use on the server.
I have installed 10.2.0.3.0 32 bit on the server 2008 R2 x64. It is not working and i get a page not found error when i browse to our application. I know i need to install a patchset or something newer than 10.2.0.3.0. How do i install the 32 bit 10.2.0.4.0 patchset on my server? Is there a different patchset i need to install? When i tried to install the patchset, it said:
Checking installer requirements...
Checking operating system version: must be 5.0, 5.1, 5.2 or 6.0. Actual 6.1
Failed
What do I need to do to get 10g 32 bit to work on my server 2008 R2 x64 server?
Thanks!

Replying for your patchset installation pre-req error:
Use below command:
./runInstaller -ignoreSysPrereqs
Review MOS note 763143.1 for more info.

Windows Server 2008 R2 DNS Entry Auto remove not working

Similar Messages

Maybe you are looking for