Windows Server 2008 R2 DNS service issue with BitLocker

I recently installed BitLocker on a Windows Server 2008 Platform. I did not encrypt the boot partition because the server hardware BIOS did not have the necessary requirements to encrypt the system drive.
The Server roles are ADSM, DC and File Server. For DC operation I am also running the DNS service.
When I installed the DNS role I was prompted to install the Log files on a different volume than the OS. I did this, but unfortunately, it was the same volume that was encrypted.
Since I could not encrypt the system disk, the encrypted volume must be unlocked via password in order to mount. Here in lise my problem.
When I do a full reboot of the server, I get to the point in the boot process where my mouse is visible and operational (this would be just before the Windows OS logo displays, I believe), then the server reboots. On the next boot up I am given the diagonstics
and recovery dialog because the OS failed to boot.
I believe the failure is the DNS service trying to launch, but because the log files are on the encrypted drive and it has not been unlocked, the system sees this as a security problem and reboots
Does this make sense? If it does, is there a way to boot 2008 R2 with the DNS service disabled, say with the original install disk in recovery mode?
Any help would be greatly appreciated as this system cannot be booted in its current state.
Peter C. Hesse Network/Systems Administrator

Hi,
I believe you mean the Active Directory Logs not the DNS logs, because these are necessary to startup a domain controller, because the AD database depends on these logs.
So if you have AD logs on a different partition and that is encrypted with Bitlocker you could probably automatically unlock it.
So you did not encrypt OS partition because the server does not have a TPM fully compliant chip ?
manage-bde /?
manage-bde -autounlock -enable Driveletter:
But you have to be able to boot server normal mode I am not sure if the command can be used in DSRM mode.
Below are some links that might help:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/c52ffc7d-f822-4b61-b633-46f8e04eac80/bitlocker-for-domain-controller
Hope this helps.
Regards,
Calin

Similar Messages

Does Safari run in Windows Server 2008 R2 (Terminal Services)?

does Safari run in Windows Server 2008 R2 (Terminal Services)?

Hi Jess,
Here are two things I suggest you check:
The Monitoring interval is set to 900 minutes, would the profile size get reduced after 15 hours and run
gpupdate/force?
Since the Sessenv.dll version is higher than the ones described in KB 2575946, the issue is supposed to be fixed. I suggest you run System File Checker to scan all protected system files.
In addition, you can also collect Gpsvc.log to determine if policies are applied successfully.
More information for you:
System File Checker (sfc)
http://technet.microsoft.com/en-us/library/bb491008.aspx
Group Policy not being applied
http://social.technet.microsoft.com/Forums/windowsserver/en-US/9884d06d-b5f8-44c9-a703-7b5211f1e0ba/group-policy-not-being-applied?forum=winserverGP
Best Regards,
Amy

Windows Server 2008 R2 SP1 BSOD 0x1a with CLFS.sys

Hello,
I've got a BSOD on a Windows Server 2008 R2 with SP1 installed. Analyzed the dump and could
see a Bug-check of 0x1a which means "MEMORY_MANAGEMENT".
Further analysis on this dump shows me, that this probably is caused by the CLFS.sys, which
is the Common Log File System Driver. This CLFS.sys is installed with date:
Tue Jul 14 01:19:57 2009
I have now searched trough MS Support pages and resources and also the Internet, but I found no
information about an update for this or a newer version. It's nearby impossible to find newer versions
for specific files in i.e. Hot-fixes.
Do you know this issue with the 0x1a BSOD and CLFS.sys and/or do you know a newer version ?
Any help would be very appreciated!
Thanks and regards plus have a nice day !
Tino

Hi Tino,
Regarding to Bug Check 0x1A, please refer to following article.
Bug Check 0x1A: MEMORY_MANAGEMENT
Did you install any third-party application in this problematic server? Would you please let me know whether
the BSOD issue occurred regularly? Or just occurred suddenly? If the BSOD issue occurred regularly, please
perform a clean boot and check if this BSOD issue still exists.
In addition, please check if necessary updates need to be installed and drivers need to be updated. Please
run sfc /scannow command to scan all protected system files and check if find errors.
As you know, troubleshoot this kind of kernel crash issue, we need to analyze the crash dump file to narrow down the root cause of the issue. Actually, it is not effective
for us to debug the crash dump file here in the forum. If this issues is a state of emergency for you. Please contact Microsoft Customer Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request, please refer to the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
àThis CLFS.sys is installed with date: Tue Jul 14 01:19:57 2009
àor do you know a newer version?
By the way, I checked the CLFS.sys in a Windows Server 2008 R2 in my Lab environment. It also created in July
2009.
Hope this helps.
Best regards,
Justin Gu

How to up Windows Server 2008 R2 SP1 created VM with Windows 8.1 hyper-v manager

Hi
I have VM that created with Windows Server
2008 R2 SP1. This was up without a problem with the windows 8 hyper-v manager. I have recently upgraded my OS with 8.1. Now I have tried to import this VM but it
throwme following message.
This is a real pain when there is no way of doing this. Any help greatly appreciated.
Regards
Radika

Hi,
Brian is right, for mange the Server 2008r2 sp1 we recommend use the Windows 7 or 7.1 platform.
More information:
Remote Server Administration Tools for Windows 7 with Service Pack 1 (SP1)
http://www.microsoft.com/en-us/download/details.aspx?id=7887
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Update windows server 2008 r2 to service pack1

how we can update the windows server 2008 r2 to windows server 2008 r2 service pack 1
with consideration that I already have active directory in this server
i don't find any documentation for updating windows server 2008 R2 to windows server 2008 r2 service pack 1

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
Since your post is off-topic, I am moving it to the
off topic forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Windows Server 2008 R2 - Fax service fails daily.

Hi,
We are experiencing a daily crash of the fax service on Windows Server 2008 R2.
We have installed the hotfix as mentioned here: http://support.microsoft.com/kb/973640 but still getting daily crashes.
Someone mentioned here that Microsoft wrote a code injection application that fixed it but I can't find that anywhere.
Any help appreciated.
Thanks
Event 1000
Faulting application name: fxssvc.exe, version: 6.1.7600.20788, time stamp: 0x4c75f01a
Faulting module name: cdosys.dll_unloaded, version: 0.0.0.0, time stamp: 0x4a5bde95
Exception code: 0xc000041d
Fault offset: 0x000007fedb5fd258
Faulting process id: 0x3124
Faulting application start time: 0x01cbee176ffb3077
Faulting application path: C:\Windows\system32\fxssvc.exe
Faulting module path: cdosys.dll
Report Id: fff4e925-5a0c-11e0-821f-002564fcea0f
Event 1001
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: fxssvc.exe
P2: 6.1.7600.20788
P3: 4c75f01a
P4: cdosys.dll_unloaded
P5: 0.0.0.0
P6: 4a5bde95
P7: c000041d
P8: 000007fedb5fd258
P9:
P10:
Attached files:
C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\WERBAD4.tmp.appcompat.txt
C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\WERBAF4.tmp.WERInternalMetadata.xml
C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\WERBB05.tmp.hdmp
C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\WERBC1F.tmp.mdmp
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_fxssvc.exe_89b8f5e86df31f4ed956a0a2c86825db0c72af9_cab_56f4bd34
Analysis symbol:
Rechecking for solution: 0
Report Id: fff4e925-5a0c-11e0-821f-002564fcea0f
Report Status: 4

Hi,
Thanks for the post.
We may have to analyze memory dump file to narrow down the cause of this issue, forum is not the best place for analyzing dump. It’s suggested to contact Microsoft Customer Support Services (CSS) so that a dedicated Support Professional can help you
on this issue.
To obtain the phone numbers for specific technology request please take a look at the web site listed below.
http://support.microsoft.com/default.aspx?scid=fh;EN-US;PHONENUMBERS
If you are outside the US please see http://support.microsoft.com for regional support phone numbers.
Thanks,
Miles
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Windows Server 2008 r2 File service and Storage File opened by "another user"

When I was using Windows server 2003 it show files opened by "user's name" but after changing to windows server 2008 r2 it only shows File opened by "another user" this is a hug problem in our organization which has around 200 staff's
sharing files, and dont know who has opened file,
We administrator can see and close opened file from "Manage opened files" but we want users also to see who has opened current file they are using instead of showing opened by another user displaying the user's name of the file opened.
Can anyone help me with this problem,
Thank you in Advance,

Hi,
I tried on a Windows 2008 R2 system and here is the result.
Here "2" is a standard domain user so it could be displayed correctly.
I would like to know if the issue specifically occurs on Office files? If so it could be an Office issue instead of system related. You can try one of the following 2 files:
Excel 2007 - http://support.microsoft.com/kb/2598133
Excel 2010 - http://support.microsoft.com/kb/2598143
If you have any feedback on our support, please send to [email protected]

How to install Windows Server 2008 (dualboot) on a PC with Windows 8.1 already on it?

Hi, I bought a new PC with preinstalled Windows 8. Now I need to install Windows Server 2008. Anyone can advise me how to
do it? It has to be in dual boot, in Virtual Machine the display is way too small

You should check out the Boot-to-VHD capability.
Here is how we do it in a lab environment which we got from a Microsoft lab:
-Verify your computer is running Windows 7 or later.
-Verify you have full administrator rights to your currently installed operating system.
-Verify hard disk encryption or other pre-boot security is turned off.
-Confirm that hardware virtualization technology and memory protection are both enabled in your computer's BIOS setup.
Now we just setup the a VHD with an operating system on it (can even use a downloaded server 180 day trial VHD if you are in a rush). Then go to Disk Management and select Attach VHD and point to the file. Note the drive letter that is assigned to the
mounted VHD.
Run a command prompt as administrator and type: " bcdedit /export BCDBackup.bak " to create an exported backup of your boot loader configuration. Now type bcdboot [drive]:\windows.
Now to test your dual-boot configuration, restart your computer and select the new OS boot option.
An optional last step would be when complete to restore your boot loader by running "bcdedit /import BCDBackup.bak" and delete any VHD files.
A more detailed guide written for Windows 7 but still applies for Windows 8 can be found at:
http://technet.microsoft.com/en-us/video/windows-7-boot-from-vhd.aspx
Hope that helps.

Windows Server 2008 AD & DNS issue

Hi Guys,
I have an Server 2008 ADDS enviroment with this DC-s:
"List of domain controllers with accounts in the domain:
WTEHU001 (powered off)
WTEHU003 (powered off)
ZEUS
MINERVA
GYAL-DC1
The command completed successfully."
When I change from google dns (8.8.8.8) to local DNS address (127.0.0.1) on DNS entries of NIC of Server, I get error messages:
"The DNS server is waiting for Active Directory Domain Services (AD DS) to signal that the initial synchronization of the directory has been completed. The DNS server service cannot start until the initial synchronization is complete because critical
DNS data might not yet be replicated onto this domain controller"
DNS service is unavailable on this situation.
With google DNS on server's NIC, local DNS service is available and nslookup is working on local machines:
"nslookup zeus
Kiszolgáló: zeus.wtehu.local
Address: 10.31.7.6
Név: zeus.wtehu.local"
But, I get this error message with "dcdiag /test:dns"
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = ZEUS
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\ZEUS
Starting test: Connectivity
The host 57650e4a-f396-4929-92f0-cf1adb2bba95._msdcs.wtehu.local could
not be resolved to an IP address. Check the DNS server, DHCP, server
name, etc.
Got error while checking LDAP and RPC connectivity. Please check your
firewall settings.
......................... ZEUS failed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\ZEUS
Starting test: DNS
DNS Tests are running and not hung. Please wait a few minutes...
......................... ZEUS passed test DNS
Running partition tests on : ForestDnsZones
Running partition tests on : DomainDnsZones
Running partition tests on : Schema
Running partition tests on : Configuration
Running partition tests on : wtehu
Running enterprise tests on : wtehu.local
Starting test: DNS
Test results for domain controllers:
DC: ZEUS.wtehu.local
Domain: wtehu.local
TEST: Basic (Basc)
Error: No LDAP connectivity
Warning: adapter
[00000008] Broadcom BCM5716C NetXtreme II GigE (NDIS VBD Client)
has invalid DNS server: 8.8.8.8 (<name unavailable>)
Error: all DNS servers are invalid
No host records (A or AAAA) were found for this DC
TEST: Delegations (Del)
Error: DNS server: wtehu001.wtehu.local. IP:10.31.7.200
[Broken delegated domain _msdcs.wtehu.local.]
TEST: Dynamic update (Dyn)
Warning: Failed to add the test record dcdiag-test-record in zone wtehu.local
TEST: Records registration (RReg)
Error: Record registrations cannot be found for all the network
adapters
Summary of test results for DNS servers used by the above domain
controllers:
DNS server: 8.8.8.8 (<name unavailable>)
2 test failure on this DNS server
Name resolution is not functional. _ldap._tcp.wtehu.local. failed on the DNS server 8.8.8.8
DNS server: 10.31.7.200 (wtehu001.wtehu.local.)
1 test failure on this DNS server
PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DNS server 10.31.7.200
Summary of DNS test results:
Auth Basc Forw Del Dyn RReg Ext
Domain: wtehu.local
ZEUS PASS FAIL PASS FAIL WARN FAIL n/a
......................... wtehu.local failed test DNSs
Replication test output:
Repadmin: running command /showrepl against full DC localhost
Default-First-Site-Name\ZEUS
DSA Options: IS_GC
Site Options: (none)
DSA object GUID: 57650e4a-f396-4929-92f0-cf1adb2bba95
DSA invocationID: 20c20b47-dcb3-437b-a316-b0639f90b753
==== INBOUND NEIGHBORS ======================================
DC=wtehu,DC=local
Default-First-Site-Name\WTEHU001 via RPC
DSA object GUID: 5a8cc029-a880-44c1-b3e3-92961fd4d74d
Last attempt @ 2014-01-05 09:46:29 failed, result 8524 (0x214c):
The DSA operation is unable to proceed because of a DNS lookup failure.
23 consecutive failure(s).
Last success @ 2014-01-04 10:07:35.
Default-First-Site-Name\WTEHU003 via RPC
DSA object GUID: 7559995a-cd48-4d43-972e-1492f4c56fd4
Last attempt @ 2014-01-05 09:47:11 failed, result 8524 (0x214c):
The DSA operation is unable to proceed because of a DNS lookup failure.
345 consecutive failure(s).
Last success @ 2014-01-04 10:15:23.
Default-First-Site-Name\GYAL-DC1 via RPC
DSA object GUID: c006625c-244b-4710-a55e-812a764a019b
Last attempt @ 2014-01-05 09:47:17 failed, result 8524 (0x214c):
The DSA operation is unable to proceed because of a DNS lookup failure.
302 consecutive failure(s).
Last success @ 2014-01-04 10:33:17.
Default-First-Site-Name\MINERVA via RPC
DSA object GUID: ad0ee6cf-2f73-4b98-80c3-2cd4693d749d
Last attempt @ 2014-01-05 09:52:05 was successful.
CN=Configuration,DC=wtehu,DC=local
Default-First-Site-Name\WTEHU001 via RPC
DSA object GUID: 5a8cc029-a880-44c1-b3e3-92961fd4d74d
Last attempt @ 2014-01-05 09:46:35 failed, result 8524 (0x214c):
The DSA operation is unable to proceed because of a DNS lookup failure.
23 consecutive failure(s).
Last success @ 2014-01-04 09:53:07.
Default-First-Site-Name\GYAL-DC1 via RPC
DSA object GUID: c006625c-244b-4710-a55e-812a764a019b
Last attempt @ 2014-01-05 09:46:41 failed, result 8524 (0x214c):
The DSA operation is unable to proceed because of a DNS lookup failure.
29 consecutive failure(s).
Last success @ 2014-01-04 09:53:08.
Default-First-Site-Name\WTEHU003 via RPC
DSA object GUID: 7559995a-cd48-4d43-972e-1492f4c56fd4
Last attempt @ 2014-01-05 09:46:47 failed, result 8524 (0x214c):
The DSA operation is unable to proceed because of a DNS lookup failure.
30 consecutive failure(s).
Last success @ 2014-01-04 09:53:07.
Default-First-Site-Name\MINERVA via RPC
DSA object GUID: ad0ee6cf-2f73-4b98-80c3-2cd4693d749d
Last attempt @ 2014-01-05 09:46:47 was successful.
CN=Schema,CN=Configuration,DC=wtehu,DC=local
Default-First-Site-Name\WTEHU001 via RPC
DSA object GUID: 5a8cc029-a880-44c1-b3e3-92961fd4d74d
Last attempt @ 2014-01-05 09:46:53 failed, result 8524 (0x214c):
The DSA operation is unable to proceed because of a DNS lookup failure.
23 consecutive failure(s).
Last success @ 2014-01-04 09:53:08.
Default-First-Site-Name\MINERVA via RPC
DSA object GUID: ad0ee6cf-2f73-4b98-80c3-2cd4693d749d
Last attempt @ 2014-01-05 09:46:53 was successful.
Default-First-Site-Name\GYAL-DC1 via RPC
DSA object GUID: c006625c-244b-4710-a55e-812a764a019b
Last attempt @ 2014-01-05 09:46:59 failed, result 8524 (0x214c):
The DSA operation is unable to proceed because of a DNS lookup failure.
24 consecutive failure(s).
Last success @ 2014-01-04 09:53:08.
Default-First-Site-Name\WTEHU003 via RPC
DSA object GUID: 7559995a-cd48-4d43-972e-1492f4c56fd4
Last attempt @ 2014-01-05 09:47:05 failed, result 8524 (0x214c):
The DSA operation is unable to proceed because of a DNS lookup failure.
24 consecutive failure(s).
Last success @ 2014-01-04 09:53:08.
DC=DomainDnsZones,DC=wtehu,DC=local
Default-First-Site-Name\WTEHU001 via RPC
DSA object GUID: 5a8cc029-a880-44c1-b3e3-92961fd4d74d
Last attempt @ 2014-01-05 09:46:29 failed, result 1256 (0x4e8):
The remote system is not available. For information about network troubleshooting, see Windows Help.
23 consecutive failure(s).
Last success @ 2014-01-04 09:58:05.
Default-First-Site-Name\GYAL-DC1 via RPC
DSA object GUID: c006625c-244b-4710-a55e-812a764a019b
Last attempt @ 2014-01-05 09:46:41 failed, result 1256 (0x4e8):
The remote system is not available. For information about network troubleshooting, see Windows Help.
42 consecutive failure(s).
Last success @ 2014-01-04 09:57:52.
Default-First-Site-Name\WTEHU003 via RPC
DSA object GUID: 7559995a-cd48-4d43-972e-1492f4c56fd4
Last attempt @ 2014-01-05 09:46:47 failed, result 1256 (0x4e8):
The remote system is not available. For information about network troubleshooting, see Windows Help.
43 consecutive failure(s).
Last success @ 2014-01-04 09:58:07.
Default-First-Site-Name\MINERVA via RPC
DSA object GUID: ad0ee6cf-2f73-4b98-80c3-2cd4693d749d
Last attempt @ 2014-01-05 09:47:17 was successful.
DC=ForestDnsZones,DC=wtehu,DC=local
Default-First-Site-Name\WTEHU001 via RPC
DSA object GUID: 5a8cc029-a880-44c1-b3e3-92961fd4d74d
Last attempt @ 2014-01-05 09:46:29 failed, result 1256 (0x4e8):
The remote system is not available. For information about network troubleshooting, see Windows Help.
23 consecutive failure(s).
Last success @ 2014-01-04 09:53:08.
Default-First-Site-Name\GYAL-DC1 via RPC
DSA object GUID: c006625c-244b-4710-a55e-812a764a019b
Last attempt @ 2014-01-05 09:46:41 failed, result 1256 (0x4e8):
The remote system is not available. For information about network troubleshooting, see Windows Help.
25 consecutive failure(s).
Last success @ 2014-01-04 09:53:08.
Default-First-Site-Name\WTEHU003 via RPC
DSA object GUID: 7559995a-cd48-4d43-972e-1492f4c56fd4
Last attempt @ 2014-01-05 09:46:47 failed, result 1256 (0x4e8):
The remote system is not available. For information about network troubleshooting, see Windows Help.
25 consecutive failure(s).
Last success @ 2014-01-04 09:53:08.
Default-First-Site-Name\MINERVA via RPC
DSA object GUID: ad0ee6cf-2f73-4b98-80c3-2cd4693d749d
Last attempt @ 2014-01-05 09:47:17 was successful.
DsReplicaGetInfo() failed with status 8453 (0x2105):
Replication access was denied.
DsReplicaGetInfo() failed with status 8453 (0x2105):
Replication access was denied.
Regards,
Gabor

Public DNS servers should not be used in IP settings of DCs. You need to configure them as forwarders instead. Also, I would recommend using your ISP DNS servers instead of Google ones.
For the recommendation of IP settings to be used on DCs, please refer to what is written in this Wiki article: http://social.technet.microsoft.com/wiki/contents/articles/18513.active-directory-replication-issues-basic-troubleshooting-steps-single-ad-domain-in-a-single-ad-forest.aspx
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Get Active Directory User Last Logon
Create an Active Directory test domain similar to the production one
Management of test accounts in an Active Directory production domain - Part I
Management of test accounts in an Active Directory production domain - Part II
Management of test accounts in an Active Directory production domain - Part III
Reset Active Directory user password

SQL Server 2008 R2 Standard - Compatibility issues with Windows Server 2012 R2

Hello,
We used as a test a box on which we installed Windows Server 2012 R2 and SQL Server 2008 R2 Standard Edition. No Service pack was installed. It worked perfect.
Now we try to do it on another box and all of the sudden there is compatibility issue when we try to instal SQL Server. We can still install SQL Server by clicking "Continue without getting help".
Where can this come from? If it is hardware related what are the thing I should look at?
Thanks all

Hello,
Adding to Shanky suggestion, you can perform a slipstream installation of SQL Server 2008 R2 + SP3 to make SQL Server
2008 R2 compatible with the newer operating system, as explained on the following post.
http://blogs.msdn.com/b/petersad/archive/2011/07/13/how-to-slipstream-sql-server-2008-r2-and-a-sql-server-2008-r2-service-pack-1-sp1.aspx
https://support.microsoft.com/en-us/kb/955392/
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Windows Server 2008 64-bit Service Java Crash

Using the same process that has worked well for creating Windows services for my admin and managed servers on 32-bit I created them on a 64-bit machine using beasvcx64 and JAVA_VM=-server. The server generates a fatal Java exception when starting:
<Sep 19, 2011 12:16:43 PM EDT> <Warning> <oracle.as.jmx.framework.MessageLocalizationHelper> <J2EE JMX-46041> <The resource for bundle "oracle.jrf.i18n.MBeanMessageBundle" with key "oracle.jrf.JRFServ
iceMBean.checkIfJRFAppliedOnMutipleTargets" cannot be found.>
# A fatal error has been detected by the Java Runtime Environment:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x000000006d92f7a6, pid=6280, tid=7084
# JRE version: 6.0_27-b07
# Java VM: Java HotSpot(TM) 64-Bit Server VM (20.2-b06 mixed mode windows-amd64 compressed oops)
# Problematic frame:
# V [jvm.dll+0x9f7a6]
# An error report file with more information is saved as:
# d:\OBIEE\user_projects\domains\bi11g_etl_domain\hs_err_pid6280.log
Does anybody have these servers running as Windows services on 2008? Were there any special steps you took?

You nailed that Christian.
In my services both the admin and managed server were being started with the memory argument: -Xms32m -Xmx200m -XX:MaxPermSize=128m
I think this is the default.
I changed it to the parameters used in the startup scripts and it worked the first time.
bi_server1
JAVA Memory arguments: -Xms256m -Xmx2048m -XX:MaxPermSize=512m
AdminServer
JAVA Memory arguments: -Xms256m -Xmx1024m -XX:MaxPermSize=512m -XX:-UseSSE42Intrinsics
Thanks.

Windows Server 2008 driver for LaserJet 4100 with envelope printer

I have a new Windows 2008 Server 32 and a handful of HP printers. I need a driver for the LaserJet 4100 with an envelope feeder. The universal driver doesn't appear to recognize (or give an option to find) the envelope feeder. The old drivers I used on the previous server won't install on the 2008 box.
I can;t be the only person with an envelope feeder on this machine. Can anyone help or point me in the right direction?
Thanks
Jeff

I'm afraid I'll have to refer you to the Business Support Forums for further help. They're more well-versed with Laserjet printers.
Business Support Forums
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Windows Server 2008 R2 DNS Entry Auto remove not working

Dear All,
I have configured DNS Ageing for 30 days removal of unwanted host entry.but it will not work.
Active directory DNS having all unwanted host in forward lookup zone and as well as reverse lookup zone.
how to solve this ?
pls help
Sunil
SUNIL PATEL SYSTEM ADMINISTRATOR

Hi,
This is a rather common problem when configuring Scavenging and Aging of stale DNS entries. This has to be set in two spots, not just one as so many admins have difficulties with. It isn't very obvious.
Aging and Scavenging must be set on both the DNS Server and on the Zone
that you want to clean. In addition, DNS needs to be Active Directory integrated and resource records need to be dynamically registered. Static entries are ignorned.
First step:
To set aging and scavenging properties for the DNS Zones using the Windows interface
Open DNS Manager.
In the console tree, right-click the applicable DNS server, and then click
Set Aging/Scavenging for all zones.
Select the Scavenge stale resource records check box.
Modify other aging and scavenging properties as needed.
Second Step:
To set aging and scavenging properties for the DNS Server using the Windows interface
Open DNS Manager.
In the console tree, right-click the applicable DNS server, and then click
Properties.
Select the Advanced tab,and then enable Enable automatic scavenging of stale records
check box. Once done, specify the Scavenging period (That is recurring
interval for Scavenging on a DNS server) and click on OK
That will do it. Your DNS entries will then start auto scavenging based on the times you have determined. Word of caution - do not set your aging too aggressively - I have seen where an admin had set aging down to 1 day and when it finally kicked
off, nearly brought the company to a halt.

Windows server 2008 R2 Enterprise Service Pack 1 - TCP/IP Registry settings

I am facing the issue while making TCP/IP connections. This issue is occuring sometimes and not usual.
No connection could be made because the target machine actively refused it 127.0.0.1:8056.
This issue is due to server has full backlog.
Questions - Where to check the server backlog for TCP/IP requests?
How to tune the TCP/IP requests? Do we need to add any registry settings? Impact of those settings?
Any help is really appreciated.

These ones may help.
http://blogs.msdn.com/b/sql_protocols/archive/2006/03/09/546852.aspx
http://support.microsoft.com/kb/328476
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Issue Installing SP2 for Windows Server 2008 SP1

Hello, I have a very annoying issue, and I hope someone can help a bro out.
Server: Windows Server 2008 SP1 64-bit
Issue: SP2 wont install on Windows Server 2008 SP1
This is what I am seeing when I check the event viewer:
1. (Information) Windows Servicing is setting package KB948465(Service Pack) state to Staging(Staging)
2. (Error) Windows Servicing failed to complete the process of changing update 948465-382_neutral_GDR from package KB948465(Service Pack) into Staging(Staging) state
I have no idea why this is coming up, nor why the server cant fix the issue, but now I am forced to deal with it. So if anyone has any helpful tips it would be greatly appreciated.
What I have done so far:
I have downloaded the standalone SP2 file from microsoft, and tried to install, still failed. Just sent me to the prereq page, which is pretty useless considering the fact I already have SP1 installed, and nothing new has changed physically or digitally
in the system.
Also, although not a huge issue, I also have a security update that is failing, basically with the same issue as the SP. Below is its Error event log.
(Error) Windows Servicing failed to complete the process of changing update 974318-11_neutral_LDR from package KB974318(Security Update) into Staging(Staging) state
Im hoping that upon discovering the SP issue, I can resolve the security update issue, as the errors have the same issue(failed to complete staging state).Thank you for your time.
~I will provide any further info if needed.

Thank you for pointing me in the right direction Milos. Yes I ALWAYS google my issues before going on forums for help. And to no avail. However, below is the relevant info(sorry I did not post this the first time;first time dealing with an issue like this,
so I wasnt for shore what relevant data pertained to this issue):
I also did not copy and paste the entire log in here(obviously) because its huge, however I will post link to full file if requested/needed, but hopefully I grabbed the entire log for my SP2 update failure issue. All I can grab from this log is that the
CBS failed. However, I have no clue where to go after that..
WindowsUpdate.log:
2015-02-22 19:24:15:093
940 d10
AU AU initiated download, updateId = {D0ABB478-FFD1-448A-9058-939C0B427AD4}.107, callId = {2AFDE80E-EFBF-40A6-861B-32400AC5493B}
2015-02-22 19:24:15:093
940 d10
AU Setting AU scheduled install time to 2015-02-23 08:00:00
2015-02-22 19:24:15:106
940 1538
DnldMgr *************
2015-02-22 19:24:15:107
940 1538
DnldMgr ** START ** DnldMgr: Downloading updates [CallerId = AutomaticUpdates]
2015-02-22 19:24:15:107
940 1538
DnldMgr *********
2015-02-22 19:24:15:107
940 1538
DnldMgr * Call ID = {2AFDE80E-EFBF-40A6-861B-32400AC5493B}
2015-02-22 19:24:15:107
940 1538
DnldMgr * Priority = 1, Interactive = 0, Owner is system = 1, Explicit proxy = 0, Proxy session id = -1, ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}
2015-02-22 19:24:15:107
940 1538
DnldMgr * Updates to download = 1
2015-02-22 19:24:15:107
940 1538
Agent * Title = Windows Server 2008 Service Pack 2 for x64-based Systems (KB948465)
2015-02-22 19:24:15:108
940 1538
Agent * UpdateId = {D0ABB478-FFD1-448A-9058-939C0B427AD4}.107
2015-02-22 19:24:15:108
940 1538
Agent * Bundles 2 updates:
2015-02-22 19:24:15:108
940 1538
Agent * {A34F6A47-5AB9-44CB-AB3F-9FC64F7B903C}.107
2015-02-22 19:24:15:108
940 1538
Agent * {77DBCA97-29DC-42BA-9DB2-03C7B4D262D4}.107
2015-02-22 19:24:15:108
940 1538
DnldMgr *********** DnldMgr: Regulation Refresh [Svc: {9482F4B4-E343-43B6-B170-9A65BC822C77}] ***********
2015-02-22 19:24:15:108
940 1538
DnldMgr Contacting regulation server for 2 updates.
2015-02-22 19:24:15:109
940 1538
Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\wuredir.cab:
2015-02-22 19:24:15:119
940 1538
Misc Microsoft signed: Yes
2015-02-22 19:24:15:123
940 1538
Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\wuredir.cab:
2015-02-22 19:24:15:131
940 1538
Misc Microsoft signed: Yes
2015-02-22 19:24:15:134
940 1538
DnldMgr Regulation server path: https://www.update.microsoft.com/v6/UpdateRegulationService/UpdateRegulation.asmx.
2015-02-22 19:24:15:135
940 d10
AU # Pending download calls = 1
2015-02-22 19:24:15:135
940 d10
AU <<## SUBMITTED ## AU: Download updates
2015-02-22 19:24:15:644
940 1538
DnldMgr * Regulation call complete. 0x00000000
2015-02-22 19:24:15:661
940 1538
DnldMgr *********** DnldMgr: New download job [UpdateId = {A34F6A47-5AB9-44CB-AB3F-9FC64F7B903C}.107] ***********
2015-02-22 19:24:15:732
940 1538
DnldMgr * All files for update were already downloaded and are valid.
2015-02-22 19:24:15:732
940 1538
DnldMgr *********** DnldMgr: New download job [UpdateId = {77DBCA97-29DC-42BA-9DB2-03C7B4D262D4}.107] ***********
2015-02-22 19:24:15:733
940 1538
DnldMgr * Queueing update for download handler request generation.
2015-02-22 19:24:15:733
940 1538
DnldMgr Generating download request for update {77DBCA97-29DC-42BA-9DB2-03C7B4D262D4}.107
2015-02-22 19:24:16:095
940 1538
Handler Generating request for CBS update 77DBCA97-29DC-42BA-9DB2-03C7B4D262D4 in sandbox C:\Windows\SoftwareDistribution\Download\2c728f96f2387c9d64aed5c97088b631
2015-02-22 19:24:16:095
940 1538
Handler Selected payload type is ptExpress
2015-02-22 19:24:16:124
940 1538
Handler UH: DpxRestoreJob returned 0x80070002
2015-02-22 19:24:16:124
940 1538
Handler Detected download state is dsHavePackage
2015-02-22 19:25:32:077
940 dcc
AU AU received policy change subscription event
2015-02-22 19:26:21:898
940 d40
Handler FATAL: CBS called Error with 0x80070002,
2015-02-22 19:26:21:899
940 1538
Handler FATAL: UH: 0x80070002: Async stage operation failed in CUHCbsHandler::StageCbsPackage
2015-02-22 19:26:21:909
940 1538
Handler FATAL: Request generation for CBS update complete with hr=0x80070002 and pfResetSandbox=0
2015-02-22 19:26:21:909
940 1538
Handler FATAL: Error source is 106.
2015-02-22 19:26:21:909
940 1538
DnldMgr FATAL: DM:CAgentDownloadManager::GenerateAllDownloadRequests: GenerateDownloadRequest failed with 0x80070002.
2015-02-22 19:26:21:909
940 1538
DnldMgr Error 0x80070002 occurred while downloading update; notifying dependent calls.
2015-02-22 19:26:35:006
940 1538
Agent *********
2015-02-22 19:26:35:006
940 d10
AU >>## RESUMED ## AU: Download update [UpdateId = {D0ABB478-FFD1-448A-9058-939C0B427AD4}]
2015-02-22 19:26:35:007
940 1538
Agent ** END ** Agent: Downloading updates [CallerId = AutomaticUpdates]
2015-02-22 19:26:35:007
940 d10
AU # WARNING: Download failed, error = 0x80070002
2015-02-22 19:26:35:007
940 1538
Agent *************
2015-02-22 19:26:35:007
940 d10
AU #########
2015-02-22 19:26:35:007
940 1538
Report REPORT EVENT: {3C6B2054-CE6F-4A29-9E94-D44AB5C4963F}
2015-02-22 19:24:15:004-0500 1
147 101
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdates
Success Software Synchronization
Windows Update Client successfully detected 2 updates.
2015-02-22 19:26:35:008
940 d10
AU ## END ## AU: Download updates
2015-02-22 19:26:35:008
940 d10
AU #############
2015-02-22 19:26:35:008
940 d10
AU Setting AU scheduled install time to 2015-02-23 08:00:00
2015-02-22 19:26:35:008
940 1538
Report CWERReporter finishing event handling. (00000000)
2015-02-22 19:26:35:009
940 1538
Report REPORT EVENT: {85DD7E1D-0632-44FF-81F3-34E75B954869}
2015-02-22 19:26:22:129-0500 1
161 106
{D0ABB478-FFD1-448A-9058-939C0B427AD4}
107 80070002
AutomaticUpdates Failure
Content Download Error: Download failed.
2015-02-22 19:26:35:181
940 1538
Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2015-02-22 19:26:35:181
940 1538
Report WER Report sent: 7.4.7600.226 0x80070002 D0ABB478-FFD1-448A-9058-939C0B427AD4 Download 106 Unmanaged
2015-02-22 19:26:35:182
940 1538
Report CWERReporter finishing event handling. (00000000)
2015-02-22 19:26:40:009
940 1538
Report REPORT EVENT: {E88B7854-8974-46BE-B243-143ED103C6FF}
2015-02-22 19:26:35:009-0500 1
188 102
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdates
Success Content Install
Installation Ready: The following updates are downloaded and ready for installation. This computer is currently scheduled to install these updates on ‎Monday, ‎February ‎23, ‎2015 at 3:00 AM: - Security Update for Windows Server 2008 x64 Edition
(KB2507618)
2015-02-22 19:26:40:009
940 1538
Report CWERReporter finishing event handling. (00000000)

Windows Server 2008 R2 DNS service issue with BitLocker

Similar Messages

Maybe you are looking for