Windows server 2008 R2 is not showing the second hard disk.
Hi,
We are having two windows server 2008 R2. In that we have, two hard disk and each with 146GB storage capacity. But it is displaying only the storage capacity of a single hard disk. Seems like the second hard disk in not recognized.
What can be done to clear this?
Regards
Manoj S
Hi,
As Burak mentioned, first you need to check if it displayed in Disk Management.
If so, see if you can initial it, create a volume and assign a drive letter.
If not, check if it is recognized in BIOS. Also test if it could be recognized in another computer.
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Similar Messages
-
Mac OS X Server v10.7 does not show the ethernet link aggregated interface i created. Does Lion server support ethernet link aggregated interfaces?
Thanks for responding Cold--
Hardware: Mac Pro 3.0 GHZ quad core xeon
I read the link but it still does not explain why the aggregated dual ethernet interface does not show up in the Network tab of the hardware section Lion Server. I was able to see it on the network and looks to be using a single static IP that I assigned. My concern was that is this supported and will it allow for failover and double performance of the single network interface.
Any thoughts?
Thanks again! -
Is it possible to install Lion on the second hard disk on my Mini (2010) Snow Leopard Server, and switch between Lion and Snow Leopard? I like those voices Lion has in speech.
When baltwosaid NO emphatically, that was described as CORRECT ANSWER. Ditto in the caeses of the radically different answers from Camelotand Matt Clifton
Could it be that CORRECT ANSWER needs better defining by Apple?
That apart, yes, switching might involve rebooting. About the voices, well, I was the other day adding voice to a commentary in a video I was working on. There's only American English accent in SL — Lion I believe has British ones as well.
Why not, I wondered, try to install Lion purely for academic interest, maybe with an SD card (Sandisk Ultra II, 16GB) as Tom Nelson says is possible at http://macs.about.com/od/macoperatingsystems/ss/Perform-A-Clean-Install-Of-Os-X- Lion-On-Your-Mac.htm -
How to install the second hard disk (HP ProBook 6560b LG658EA) ?
How to install the second hard disk (HP ProBook 6560b LG658EA) ?
Hi,
You can install a second HDD in the Upgrade Bay - this is detailed on Page 67 of your Maintenance & Service Guide.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Server 2008 R2 does not show Internet Explorer 10/11 Group Policy options
Hello,
I have a Windows Server 2008 R2 server that has IE11 installed. I am attempting to create a GPO to control Proxy settings for IE10/11 clients, however, when I go to User Config>Preferences> Control Panel Settings> Internet Settings and Right click,
I do not see an option for IE10, only IE5 and 6, IE7, and IE8.
I have downloaded and installed the Administrative Templates for Internet Explorer from
here, and followed the installation instructions, but still, the option does not show up. I have ensured that all the latest Windows Updates are installed on the server, and rebooted
the server a couple times.
What am I missing here?
Thanks in advance.<meta content="text/html; charset=UTF-16" http-equiv="Content-Type" /><title>SFDN\testuser</title> <style type="text/css">body { background-color:#FFFFFF; border:1px solid #666666; color:#000000; font-size:68%;
font-family:MS Shell Dlg; margin:0,0,10px,0; word-break:normal; word-wrap:break-word; } table { font-size:100%; table-layout:fixed; width:100%; } td,th { overflow:visible; text-align:left; vertical-align:top; white-space:normal; } .title { background:#FFFFFF;
border:none; color:#333333; display:block; height:24px; margin:0px,0px,-1px,0px; padding-top:4px; ; table-layout:fixed; width:100%; z-index:5; } .he0_expanded { background-color:#FEF7D6; border:1px solid #BBBBBB; color:#3333CC; cursor:hand; display:block;
font-family:MS Shell Dlg; font-size:100%; font-weight:bold; height:2.25em; margin-bottom:-1px; margin-left:0px; margin-right:0px; padding-left:8px; padding-right:5em; padding-top:4px; ; width:100%; } .he1_expanded { background-color:#A0BACB; border:1px solid
#BBBBBB; color:#000000; cursor:hand; display:block; font-family:MS Shell Dlg; font-size:100%; font-weight:bold; height:2.25em; margin-bottom:-1px; margin-left:20px; margin-right:0px; padding-left:8px; padding-right:5em; padding-top:4px; ; width:100%; } .he1h_expanded
{ background-color: #7197B3; border: 1px solid #BBBBBB; color: #000000; cursor: hand; display: block; font-family: MS Shell Dlg; font-size: 100%; font-weight: bold; height: 2.25em; margin-bottom: -1px; margin-left: 10px; margin-right: 0px; padding-left: 8px;
padding-right: 5em; padding-top: 4px; ; width: 100%; } .he1 { background-color:#A0BACB; border:1px solid #BBBBBB; color:#000000; cursor:hand; display:block; font-family:MS Shell Dlg; font-size:100%; font-weight:bold; height:2.25em; margin-bottom:-1px; margin-left:20px;
margin-right:0px; padding-left:8px; padding-right:5em; padding-top:4px; ; width:100%; } .he2 { background-color:#C0D2DE; border:1px solid #BBBBBB; color:#000000; cursor:hand; display:block; font-family:MS Shell Dlg; font-size:100%; font-weight:bold; height:2.25em;
margin-bottom:-1px; margin-left:30px; margin-right:0px; padding-left:8px; padding-right:5em; padding-top:4px; ; width:100%; } .he3 { background-color:#D9E3EA; border:1px solid #BBBBBB; color:#000000; cursor:hand; display:block; font-family:MS Shell Dlg; font-size:100%;
font-weight:bold; height:2.25em; margin-bottom:-1px; margin-left:40px; margin-right:0px; padding-left:11px; padding-right:5em; padding-top:4px; ; width:100%; } .he4 { background-color:#E8E8E8; border:1px solid #BBBBBB; color:#000000; cursor:hand; display:block;
font-family:MS Shell Dlg; font-size:100%; font-weight:bold; height:2.25em; margin-bottom:-1px; margin-left:50px; margin-right:0px; padding-left:11px; padding-right:5em; padding-top:4px; ; width:100%; } .he4h { background-color:#E8E8E8; border:1px solid #BBBBBB;
color:#000000; cursor:hand; display:block; font-family:MS Shell Dlg; font-size:100%; font-weight:bold; height:2.25em; margin-bottom:-1px; margin-left:55px; margin-right:0px; padding-left:11px; padding-right:5em; padding-top:4px; ; width:100%; } .he4i { background-color:#F9F9F9;
border:1px solid #BBBBBB; color:#000000; display:block; font-family:MS Shell Dlg; font-size:100%; margin-bottom:-1px; margin-left:55px; margin-right:0px; padding-bottom:5px; padding-left:21px; padding-top:4px; ; width:100%; } .he5 { background-color:#E8E8E8;
border:1px solid #BBBBBB; color:#000000; cursor:hand; display:block; font-family:MS Shell Dlg; font-size:100%; font-weight:bold; height:2.25em; margin-bottom:-1px; margin-left:60px; margin-right:0px; padding-left:11px; padding-right:5em; padding-top:4px; ;
width:100%; } .he5h { background-color:#E8E8E8; border:1px solid #BBBBBB; color:#000000; cursor:hand; display:block; font-family:MS Shell Dlg; font-size:100%; padding-left:11px; padding-right:5em; padding-top:4px; margin-bottom:-1px; margin-left:65px; margin-right:0px;
; width:100%; } .he5i { background-color:#F9F9F9; border:1px solid #BBBBBB; color:#000000; display:block; font-family:MS Shell Dlg; font-size:100%; margin-bottom:-1px; margin-left:65px; margin-right:0px; padding-left:21px; padding-bottom:5px; padding-top:
4px; ; width:100%; } DIV .expando { color:#000000; text-decoration:none; display:block; font-family:MS Shell Dlg; font-size:100%; font-weight:normal; ; right:10px; text-decoration:underline; z-index: 0; } .he0 .expando { font-size:100%; } .info, .info3, .info4,
.disalign { line-height:1.6em; padding:0px,0px,0px,0px; margin:0px,0px,0px,0px; } .disalign TD { padding-bottom:5px; padding-right:10px; } .info TD { padding-right:10px; width:50%; } .info3 TD { padding-right:10px; width:33%; } .info4 TD, .info4 TH { padding-right:10px;
width:25%; } .info TH, .info3 TH, .info4 TH, .disalign TH { border-bottom:1px solid #CCCCCC; padding-right:10px; } .subtable, .subtable3 { border:1px solid #CCCCCC; margin-left:0px; background:#FFFFFF; margin-bottom:10px; } .subtable TD, .subtable3 TD { padding-left:10px;
padding-right:5px; padding-top:3px; padding-bottom:3px; line-height:1.1em; width:10%; } .subtable TH, .subtable3 TH { border-bottom:1px solid #CCCCCC; font-weight:normal; padding-left:10px; line-height:1.6em; } .subtable .footnote { border-top:1px solid #CCCCCC;
} .subtable3 .footnote, .subtable .footnote { border-top:1px solid #CCCCCC; } .subtable_frame { background:#D9E3EA; border:1px solid #CCCCCC; margin-bottom:10px; margin-left:15px; } .subtable_frame TD { line-height:1.1em; padding-bottom:3px; padding-left:10px;
padding-right:15px; padding-top:3px; } .subtable_frame TH { border-bottom:1px solid #CCCCCC; font-weight:normal; padding-left:10px; line-height:1.6em; } .subtableInnerHead { border-bottom:1px solid #CCCCCC; border-top:1px solid #CCCCCC; } .explainlink { color:#000000;
text-decoration:none; cursor:hand; } .explainlink:hover { color:#0000FF; text-decoration:underline; } .spacer { background:transparent; border:1px solid #BBBBBB; color:#FFFFFF; display:block; font-family:MS Shell Dlg; font-size:100%; height:10px; margin-bottom:-1px;
margin-left:43px; margin-right:0px; padding-top: 4px; ; } .filler { background:transparent; border:none; color:#FFFFFF; display:block; font:100% MS Shell Dlg; line-height:8px; margin-bottom:-1px; margin-left:53px; margin-right:0px; padding-top:4px; ; } .container
{ display:block; ; } .rsopheader { background-color:#A0BACB; border-bottom:1px solid black; color:#333333; font-family:MS Shell Dlg; font-size:130%; font-weight:bold; padding-bottom:5px; text-align:center; } .rsopname { color:#333333; font-family:MS Shell
Dlg; font-size:130%; font-weight:bold; padding-left:11px; } .gponame{ color:#333333; font-family:MS Shell Dlg; font-size:130%; font-weight:bold; padding-left:11px; } .gpotype{ color:#333333; font-family:MS Shell Dlg; font-size:100%; font-weight:bold; padding-left:11px;
} #uri { color:#333333; font-family:MS Shell Dlg; font-size:100%; padding-left:11px; } #dtstamp{ color:#333333; font-family:MS Shell Dlg; font-size:100%; padding-left:11px; text-align:left; width:30%; } #objshowhide { color:#000000; cursor:hand; font-family:MS
Shell Dlg; font-size:100%; font-weight:bold; margin-right:0px; padding-right:10px; text-align:right; text-decoration:underline; z-index:2; word-wrap:normal; } #gposummary { display:block; } #gpoinformation { display:block; } @media print { #objshowhide{ display:none;
} body { color:#000000; border:1px solid #000000; } .title { color:#000000; border:1px solid #000000; } .he0_expanded { color:#000000; border:1px solid #000000; } .he1h_expanded { color:#000000; border:1px solid #000000; } .he1_expanded { color:#000000; border:1px
solid #000000; } .he1 { color:#000000; border:1px solid #000000; } .he2 { color:#000000; background:#EEEEEE; border:1px solid #000000; } .he3 { color:#000000; border:1px solid #000000; } .he4 { color:#000000; border:1px solid #000000; } .he4h { color:#000000;
border:1px solid #000000; } .he4i { color:#000000; border:1px solid #000000; } .he5 { color:#000000; border:1px solid #000000; } .he5h { color:#000000; border:1px solid #000000; } .he5i { color:#000000; border:1px solid #000000; } } v\:* {behavior:url(#default#VML);}
</style> <script language="vbscript"> <!-- '================================================================================ ' String "strShowHide(0/1)" ' 0 = Hide all mode. ' 1 = Show all mode. strShowHide = 1 'Localized
strings strShow = "show" strHide = "hide" strShowAll = "show all" strHideAll = "hide all" strShown = "shown" strHidden = "hidden" strExpandoNumPixelsFromEdge = "10px" Function IsSectionHeader(obj)
IsSectionHeader = (obj.className = "he0_expanded") Or (obj.className = "he1h_expanded") Or (obj.className = "he1_expanded") Or (obj.className = "he1") Or (obj.className = "he2") Or (obj.className = "he3")
Or (obj.className = "he4") Or (obj.className = "he4h") Or (obj.className = "he5") Or (obj.className = "he5h") End Function Function IsSectionExpandedByDefault(objHeader) IsSectionExpandedByDefault = (Right(objHeader.className,
Len("_expanded")) = "_expanded") End Function ' strState must be show | hide | toggle Sub SetSectionState(objHeader, strState) ' Get the container object for the section. It's the first one after the header obj. i = objHeader.sourceIndex
Set all = objHeader.parentElement.document.all While (all(i).className <> "container") i = i + 1 Wend Set objContainer = all(i) If strState = "toggle" Then If objContainer.style.display = "none" Then SetSectionState
objHeader, "show" Else SetSectionState objHeader, "hide" End If Else Set objExpando = objHeader.children.item(1) If strState = "show" Then objContainer.style.display = "block" objExpando.innerText = strHide ElseIf strState
= "hide" Then objContainer.style.display = "none" objExpando.innerText = strShow End If End If End Sub Sub ShowSection(objHeader) SetSectionState objHeader, "show" End Sub Sub HideSection(objHeader) SetSectionState objHeader,
"hide" End Sub Sub ToggleSection(objHeader) SetSectionState objHeader, "toggle" End Sub '================================================================================ ' When user clicks anywhere in the document body, determine if user
is clicking ' on a header element. '================================================================================ Function document_onclick() Set strsrc = window.event.srcElement While (strsrc.className = "sectionTitle" Or strsrc.className = "expando"
Or strsrc.className = "vmlimage") Set strsrc = strsrc.parentElement Wend ' Only handle clicks on headers. If Not IsSectionHeader(strsrc) Then Exit Function ToggleSection strsrc window.event.returnValue = False End Function '================================================================================
' link at the top of the page to collapse/expand all collapsable elements '================================================================================ Function objshowhide_onClick() Set objBody = document.body.all Select Case strShowHide Case 0 strShowHide
= 1 objshowhide.innerText = strShowAll For Each obji In objBody If IsSectionHeader(obji) Then HideSection obji End If Next Case 1 strShowHide = 0 objshowhide.innerText = strHideAll For Each obji In objBody If IsSectionHeader(obji) Then ShowSection obji End
If Next End Select End Function '================================================================================ ' onload collapse all except the first two levels of headers (he0, he1) '================================================================================
Function window_onload() ' Only initialize once. The UI may reinsert a report into the webbrowser control, ' firing onLoad multiple times. If UCase(document.documentElement.getAttribute("gpmc_reportInitialized")) <> "TRUE" Then '
Set text direction Call fDetDir(UCase(document.dir)) ' Initialize sections to default expanded/collapsed state. Set objBody = document.body.all For Each obji in objBody If IsSectionHeader(obji) Then If IsSectionExpandedByDefault(obji) Then ShowSection obji
Else HideSection obji End If End If Next objshowhide.innerText = strShowAll document.documentElement.setAttribute "gpmc_reportInitialized", "true" End If End Function '================================================================================
' When direction (LTR/RTL) changes, change adjust for readability '================================================================================ Function document_onPropertyChange() If window.event.propertyName = "dir" Then Call fDetDir(UCase(document.dir))
End If End Function Function fDetDir(strDir) strDir = UCase(strDir) Select Case strDir Case "LTR" Set colRules = document.styleSheets(0).rules For i = 0 To colRules.length -1 Set nug = colRules.item(i) strClass = nug.selectorText If nug.style.textAlign
= "right" Then nug.style.textAlign = "left" End If Select Case strClass Case "DIV .expando" nug.style.Left = "" nug.style.right = strExpandoNumPixelsFromEdge Case "#objshowhide" nug.style.textAlign = "right"
End Select Next Case "RTL" Set colRules = document.styleSheets(0).rules For i = 0 To colRules.length -1 Set nug = colRules.item(i) strClass = nug.selectorText If nug.style.textAlign = "left" Then nug.style.textAlign = "right"
End If Select Case strClass Case "DIV .expando" nug.style.Left = strExpandoNumPixelsFromEdge nug.style.right = "" Case "#objshowhide" nug.style.textAlign = "left" End Select Next End Select End Function '================================================================================
'When printing reports, if a given section is expanded, let's says "shown" (instead of "hide" in the UI). '================================================================================ Function window_onbeforeprint() For Each obji In
document.all If obji.className = "expando" Then If obji.innerText = strHide Then obji.innerText = strShown If obji.innerText = strShow Then obji.innerText = strHidden End If Next End Function '================================================================================
'If a section is collapsed, change to "hidden" in the printout (instead of "show"). '================================================================================ Function window_onafterprint() For Each obji In document.all If obji.className
= "expando" Then If obji.innerText = strShown Then obji.innerText = strHide If obji.innerText = strHidden Then obji.innerText = strShow End If Next End Function '================================================================================ ' Adding
keypress support for accessibility '================================================================================ Function document_onKeyPress() If window.event.keyCode = "32" Or window.event.keyCode = "13" Or window.event.keyCode =
"10" Then 'space bar (32) or carriage return (13) or line feed (10) If window.event.srcElement.className = "expando" Then Call document_onclick() : window.event.returnValue = false If window.event.srcElement.className = "sectionTitle"
Then Call document_onclick() : window.event.returnValue = false If window.event.srcElement.id = "objshowhide" Then Call objshowhide_onClick() : window.event.returnValue = false End If End Function --> </script> <script language="javascript">
<!-- function getExplainWindowTitle() { return document.getElementById("explainText_windowTitle").innerHTML; } function getExplainWindowStyles() { return document.getElementById("explainText_windowStyles").innerHTML; } function getExplainWindowSettingPathLabel()
{ return document.getElementById("explainText_settingPathLabel").innerHTML; } function getExplainWindowExplainTextLabel() { return document.getElementById("explainText_explainTextLabel").innerHTML; } function getExplainWindowPrintButton()
{ return document.getElementById("explainText_printButton").innerHTML; } function getExplainWindowCloseButton() { return document.getElementById("explainText_closeButton").innerHTML; } function getNoExplainTextAvailable() { return document.getElementById("explainText_noExplainTextAvailable").innerHTML;
} function getExplainWindowSupportedLabel() { return document.getElementById("explainText_supportedLabel").innerHTML; } function getNoSupportedTextAvailable() { return document.getElementById("explainText_noSupportedTextAvailable").innerHTML;
} function showExplainText(srcElement) { var strSettingName = srcElement.getAttribute("gpmc_settingName"); var strSettingPath = srcElement.getAttribute("gpmc_settingPath"); var strSettingDescription = srcElement.getAttribute("gpmc_settingDescription");
if (strSettingDescription == "") { strSettingDescription = getNoExplainTextAvailable(); } var strSupported = srcElement.getAttribute("gpmc_supported"); if (strSupported == "") { strSupported = getNoSupportedTextAvailable(); }
var strHtml = "<html>\n"; strHtml += "<head>\n"; strHtml += "<title>" + getExplainWindowTitle() + "</title>\n"; strHtml += "<style type='text/css'>\n" +
getExplainWindowStyles() + "</style>\n"; strHtml += "</head>\n"; strHtml += "<body>\n"; strHtml += "<div class='head'>" + strSettingName +"</div>\n"; strHtml
+= "<div class='path'><b>" + getExplainWindowSettingPathLabel() + "</b><br/>" + strSettingPath +"</div>\n"; strHtml += "<div class='path'><b>" + getExplainWindowSupportedLabel()
+ "</b><br/>" + strSupported +"</div>\n"; strHtml += "<div class='info'>\n"; strHtml += "<div class='hdr'>" + getExplainWindowExplainTextLabel() + "</div>\n";
strHtml += "<div class='bdy'>" + strSettingDescription + "</div>\n"; strHtml += "<div class='btn'>"; strHtml += getExplainWindowPrintButton(); strHtml += getExplainWindowCloseButton();
strHtml += "</div></body></html>"; var strDiagArgs = "height=360px, width=630px, status=no, toolbar=no, scrollbars=yes, resizable=yes "; var expWin = window.open("", "expWin", strDiagArgs); expWin.document.write("");
expWin.document.close(); expWin.document.write(strHtml); expWin.document.close(); expWin.focus(); //cancels navigation for IE. if(navigator.userAgent.indexOf("MSIE") > 0) { window.event.returnValue = false; } return false; } --> </script>
Group Policy Management
body { font-size:68%;font-family:MS Shell Dlg; margin:0px,0px,0px,0px; border: 1px solid #666666; background:#F6F6F6; width:100%; word-break:normal; word-wrap:break-word; } .head { font-weight:bold; font-size:160%; font-family:MS
Shell Dlg; width:100%; color:#6587DC; background:#E3EAF9; border:1px solid #5582D2; padding- height:24px; } .path { margin- margin- margin-bottom:5px;width:100%; } .info { padding-width:100%; } table { font-size:100%; width:100%; border:1px solid #999999;
} th { border-bottom:1px solid #999999; text-align:left; padding- height:24px; } td { background:#FFFFFF; padding- padding-bottom:10px; padding- } .btn { width:100%; text-align:right; margin- } .hdr { font-weight:bold; border:1px solid #999999; text-align:left;
padding- padding- height:24px; margin-bottom:-1px; width:100%; } .bdy { width:100%; height:182px; display:block; background:#FFFFFF; padding- padding-bottom:10px; padding- border:1px solid #999999; } button { width:6.9em; height:2.1em; font-size:100%; font-family:MS
Shell Dlg; margin-right:15px; } @media print { .bdy { display:block; } button { display:none; } .head { color:#000000; background:#FFFFFF; border:1px solid #000000; } }
Setting Path:
Explanation
<button accesskey="P" name="Print" onclick="window.print()">Print</button>
<button accesskey="C" name="Close" onclick="window.close()">Close</button>
No explanation is available for this setting.
Supported On:
Not available
Group Policy Results
SFDN\testuser
Data collected on: 12/14/2014 1:00:12 PM
Summary
Computer Configuration Summary
No data available.
User Configuration Summary
General
User name
SFDN\testuser
Domain
SFD.local
Last time Group Policy was processed
12/14/2014 12:59:22 PM
Group Policy Objects
Applied GPOs
Name
Link Location
Revision
Local Group Policy
Local
AD (1), Sysvol (1)
Default Domain Policy
SFD.local
AD (6), Sysvol (6)
Test
SFD.local/SFD-Restricted-Users
AD (10), Sysvol (10)
Limit Downloads
SFD.local/SFD-Restricted-Users
AD (2), Sysvol (2)
SFD Restricted Users
SFD.local/SFD-Restricted-Users
AD (59), Sysvol (59)
Denied GPOs
Name
Link Location
Reason Denied
None
Security Group Membership when Group Policy was applied
SFDN\Domain Users
Everyone
BUILTIN\Users
NT AUTHORITY\INTERACTIVE
CONSOLE LOGON
NT AUTHORITY\Authenticated Users
NT AUTHORITY\This Organization
LOCAL
Mandatory Label\Medium Mandatory Level
WMI Filters
Name
Value
Reference GPO(s)
None
Component Status <v:group alt="Warning" class="vmlimage" coordsize="100,100" style="width:15px;height:15px;vertical-align:middle;"><v:shape class="vmlimage" fillcolor="yellow"
strokecolor="yellow" style="width:100;height:100;"><v:path v="m 50,0 l 0,99 99,99 x e"></v:path></v:shape> <v:rect class="vmlimage" fillcolor="black" strokecolor="black" style="width:10;height:35;"></v:rect>
<v:rect class="vmlimage" fillcolor="black" strokecolor="black" style="width:10;height:5;"></v:rect> </v:group>
Component Name
Status
Last Process Time
Group Policy Infrastructure
Success
12/14/2014 12:59:46 PM
Folder Redirection
Failed
12/14/2014 12:59:46 PM
Folder Redirection failed due to the error listed below.
Cannot complete this function.
Additional information may have been logged. Review the Policy Events tab in the console or the application event log for events between 12/14/2014 12:59:23 PM and 12/14/2014 12:59:46 PM.
Group Policy Internet Settings
Success
12/14/2014 12:59:46 PM
Registry
Success
12/12/2014 10:28:23 AM
Computer Configuration
No data available.
User Configuration
Policies
Windows Settings
Security Settings
Software Restriction Policies
Winning GPO
SFD Restricted Users
Enforcement
Policy
Setting
Apply software restriction policies to the following
All software files except libraries (such as DLLs)
Apply software restriction policies to the following users
All users
When applying software restriction policies
Ignore certificate rules
Designated File Types
File Extension
File Type
ADE
Microsoft Access Project Extension
ADP
Microsoft Access Project
BAS
BAS File
BAT
Windows Batch File
CHM
Compiled HTML Help file
CMD
Windows Command Script
COM
MS-DOS Application
CPL
Control panel item
CRT
Security Certificate
EXE
Application
HLP
Help file
HTA
HTML Application
INF
Setup Information
INS
INS File
ISP
ISP File
LNK
Shortcut
MDB
Microsoft Access Database
MDE
Microsoft Access MDE Database
MSC
Microsoft Common Console Document
MSI
Windows Installer Package
MSP
Windows Installer Patch
MST
MST File
OCX
ActiveX control
PCD
PCD File
PIF
Shortcut to MS-DOS Program
REG
Registration Entries
SCR
Screen saver
SHS
SHS File
URL
Internet Shortcut
VB
VB File
WSC
Windows Script Component
Trusted Publishers
Trusted publisher management
Allow all administrators and users to manage user's own Trusted Publishers
Certificate verification
None
Software Restriction Policies/Security Levels
Policy
Setting
Winning GPO
Default Security Level
Unrestricted
SFD Restricted Users
Software Restriction Policies/Additional Rules
Path Rules
%HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SystemRoot%
Security Level
Unrestricted
Description
Date last modified
9/30/2011 12:34:27 PM
Winning GPO
SFD Restricted Users
%HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\ProgramFilesDir%
Security Level
Unrestricted
Description
Date last modified
9/30/2011 12:34:27 PM
Winning GPO
SFD Restricted Users
Administrative Templates
Policy definitions (ADMX files) retrieved from the local machine.
Control Panel
Policy
Setting
Winning GPO
Network/Network Connections
Policy
Setting
Winning GPO
This setting determines whether the Properties menu item is enabled, and thus, whether the Local Area Connection Properties dialog box is available to users.
If you enable this setting (and enable the "Enable Network Connections settings for Administrators" setting), the Properties menu items are disabled for all users, and users cannot open the Local Area Connection Properties dialog box.
Important: If the "Enable Network Connections settings for Administrators" is disabled or not configured, this setting will not apply to administrators on post-Windows 2000 computers.
If you disable this setting or do not configure it, a Properties menu item appears when users right-click the icon representing a LAN connection. Also, when users select the connection, Properties is enabled on the File menu.
Note: This setting takes precedence over settings that manipulate the availability of features inside the Local Area Connection Properties dialog box. If this setting is enabled, nothing within the properties dialog box for a LAN connection is available to
users.
Note: Nonadministrators have the right to view the properties dialog box for a connection but not to make changes, regardless of this setting." gpmc_settingname="Prohibit access to properties of a LAN connection" gpmc_settingpath="User Configuration/Administrative
Templates/Network/Network Connections" gpmc_supported="At least Windows 2000 Service Pack 1" href="javascript:void();" onclick="javascript:showExplainText(this); return false;">Prohibit access to properties of a LAN connection
Enabled
SFD Restricted Users
If you enable this setting (and enable the "Enable Network Connections settings for Administrators" setting), the check boxes for enabling and disabling components are disabled. As a result, administrators cannot enable or disable the components that
a connection uses.
Important: If the "Enable Network Connections settings for Administrators" is disabled or not configured, this setting will not apply to administrators on post-Windows 2000 computers.
If you disable this setting or do not configure it, the Properties dialog box for a connection includes a check box beside the name of each component that the connection uses. Selecting the check box enables the component, and clearing the check box disables
the component.
Note: When the "Prohibit access to properties of a LAN connection" setting is enabled, users are blocked from accessing the check boxes for enabling and disabling the components of a LAN connection.
Note: Nonadministrators are already prohibited from enabling or disabling components for a LAN connection, regardless of this setting." gpmc_settingname="Prohibit Enabling/Disabling components of a LAN connection" gpmc_settingpath="User
Configuration/Administrative Templates/Network/Network Connections" gpmc_supported="Microsoft Windows Server 2003, Windows XP, and Windows 2000 Service Pack 1 operating systems only" href="javascript:void();" onclick="javascript:showExplainText(this);
return false;">Prohibit Enabling/Disabling components of a LAN connection
Enabled
SFD Restricted Users
Windows Components/Internet Explorer
Policy
Setting
Winning GPO
If you enable this policy setting, the user will not be able to configure proxy settings.
If you disable or do not configure this policy setting, the user can configure proxy settings." gpmc_settingname="Prevent changing proxy settings" gpmc_settingpath="User Configuration/Administrative Templates/Windows Components/Internet
Explorer" gpmc_supported="At least Internet Explorer 5.0" href="javascript:void();" onclick="javascript:showExplainText(this); return false;">Prevent changing proxy settings
Enabled
SFD Restricted Users
Windows Components/Internet Explorer/Internet Control Panel/Security Page/Internet Zone
Policy
Setting
Winning GPO
Allow file downloads
Disable
Extra Registry Settings
Display names for some settings cannot be found. You might be able to resolve this issue by updating the .ADM files used by Group Policy Management.
Setting
State
Winning GPO
Software\Policies\Microsoft\office\14.0\outlook\ForceOSTPath
P:\My Documents\Outlook Files
SFD Restricted Users
Software\Policies\Microsoft\office\14.0\outlook\ForcePSTPath
P:\My Documents\Outlook Files
SFD Restricted Users -
Cisco LMS 4.1 Installation on Windows Server 2008 R2, Databases not created
Hi There,
As always, I am trying to install LMS 4.1 on windows server 2008 R2 and after the installation and login to the LMS I find the following:
DCRServer is down or may not be completely up. Check if the DCRServer process is running.
And after some troubleshooting I found that the LMS is not creating the CMF database and the other databases. Attached is the installation log file, if someone could help me with it would be appreciated. Please note the following:
1. I have downloaded the installation file from Cisco website twice, so I do not think it is the file that is corrupted, also it is only evaluation license.
2. I have met all the prerequisites and requirement as in the documentation guides, but maybe there is something still wrong.
Thanks,Also Here is more info output:
C:\Program Files (x86)\CSCOpx>pdshow -brief
Process State Pid
Tomcat Program started - No mgt msgs received 1572
TomcatMonitor Running normally 2236
Apache Program started - No mgt msgs received 2436
DataPurge Administrator has shut down this server 0
DCRServer Failed to run 0
CMFOGSServer Administrator has shut down this server 0
EssentialsDM Administrator has shut down this server 0
ConfigMgmtServer Never started 0
ConfigUtilityService Never started 0
CTMJrmServer Administrator has shut down this server 0
ChangeAudit Never started 0
SyslogAnalyzer Program started - No mgt msgs received 2976
ICServer Running normally 5096
EnergyWise Never started 0
PMCOGSServer Administrator has shut down this server 0
IPMOGSServer Administrator has shut down this server 0
IPMProcess Never started 0
TISServer Program started - No mgt msgs received 2544
DFMOGSServer Program started - No mgt msgs received 876
InventoryCollector Running normally 3052
Interactor Program started - No mgt msgs received 5136
InventoryCollector1 Program started - No mgt msgs received 5144
Interactor1 Program started - No mgt msgs received 5308
PTMServer Program started - No mgt msgs received 5320
UPMProcess Never started 0
TISDiscoveryJobCreate Administrator has shut down this server 0
SyslogCollector Running normally 5340
Proxy Program started - No mgt msgs received 5348
PMServer Running normally 5360
NameServer Program started - No mgt msgs received 5680
NameServiceMonitor Running normally 5876
LicenseServer Program started - No mgt msgs received 5884
FHPurgeTask Never started 0
EventFramework Program started - No mgt msgs received 5892
EPMServer Program started - No mgt msgs received 5904
FHServer Administrator has shut down this server 0
NOSServer Program started - No mgt msgs received 5580
diskWatcher Running normally 5640
DFMMultiProcLogger Program started - No mgt msgs received 5864
DFMLogServer Program started - No mgt msgs received 4896
DFMCTMStartup Administrator has shut down this server 0
DfmBroker Running normally 6104
DfmServer Running normally 6416
DfmServer1 Running normally 6424
DCRDevicePoll Never started 0
CSRegistryServer Running normally 6432
CSDiscovery Never started 0
AdapterServer1 Program started - No mgt msgs received 6440
AdapterServer Program started - No mgt msgs received 6448
C:\Program Files (x86)\CSCOpx>pdshow DCRServer
Process= DCRServer
State = Failed to run
Pid = 0
RC = -3
Signo = 1073741821
Start = N/A
Stop = 07/02/2012 17:39:06
Core = Not applicable
Info = Application failed or was registered incorrectly.
C:\Program Files (x86)\CSCOpx>net stop crmdmgtd
The Cisco Prime Daemon Manager service is stopping..........................................
The Cisco Prime Daemon Manager service was stopped successfully.
C:\Program Files (x86)\CSCOpx>bin\perl.exe objects\db\conf\configureDb.pl action=validate dsn=cmf
INFO: C:\PROGRA~2\CSCOpx/objects/db/conf/ConfigureDB.LOCK locked for the operation...
ERROR: [StandardDbUpgrade] : Database cmf is not installed.
INFO: C:\PROGRA~2\CSCOpx/objects/db/conf/ConfigureDB.LOCK released for the future operations...
C:\Program Files (x86)\CSCOpx>bin\perl.exe bin\dbpasswd.pl all
ERROR: There is no database available to change password.
C:\Program Files (x86)\CSCOpx>bin\perl.exe bin\dbRestoreOrig.pl dsn=cmf dmprefix=Cmf npwd=pwd
'cmf' is not a valid data source for the product. -
Robocopy on Windows Server 2008 SP2 does not copy folder permissions
When using Robocopy to copy folders and files from one local hard disk to another, using /COPYALL /E /TEE options, the target folder does not contain the source folder's ACL. I've tried other options such as: /COPY:DATSOU or /SECFIX, it made no difference.
Test scenario: Create a folder on C:, Test1. Add to Test1's permissions a local group with Read, e.g. Backup Operators. The ACL list should have permissions inherited from C:\ plus Backup Operators that's not inherited. Use Robocopy to copy Test1 to C:\Test2, check the ACL on Test2. Backup Operators is missing.
It looks like Robocopy cannot override the target folder's permissions inheritance, the folder retains the parent folder's ACL.
I've also disabled User Access Control in troubleshooting this problem.
To add to this issue, there's a workaround can be used to ensure the target folder's ACL is the same as the source folder's ACL. It's a two step process.
1) Use XCOPY source_folder target_folder /I /E /X /T - This lays down the directory structure including the ACLs
2) Use ROBOCOPY source_folder target_folder /COPYALL /SECFIX /E - This will copy over the directories and files, enforcing the files to receive the parent folder's ACL. The target_folder's ACL remain intact, unaltered from XCOPY command.
The end result: the target_folder ACL is identical to the source_folder ACL, the files copied to the target_folder will inherit ACL from their parent folder. Both source and target folders and files ACLs are identical.
ROBOCOPY should do both steps, but doesn't. I've tested this scenario on bare-bones Windows Server 2008, physical and virtual machines.
Darryl MillerTo Wendy23,
Just for clarity, the Windows Server 2008 OS that I ran ROBOCOPY and XCOPY on was the non-R2 version. Microsoft might have fixed this issue in R2.
You'll probably need to logon as local Administrator or use an account belonging to the local Administrators group.
Also, open the Command Prompt using "Run as Administrator" (right-click on Command Prompt), then run the XCOPY and ROBOCOPY commands from within this prompt.
To answer G.Write, the storage is local hard disks.
Thanks, was a long time ago, I was having a problem with robocopy not copying permissions on a SAN, and was wondering if the SAN was the problem, but your method worked fine for me, thanks. -
Windows Server 2008 R2 Does not boot When Back up drive removed
I have a windows Server 2008 R2 Standard server RAID 10 installed. I have a non raid drive installed as the backup HD. The Backup drive is now failing. When I went to switch it with a new one the system does not boot and is asking for
a boot drive. I have been searching for solutions and cannot find any. Any ideas?Hi,
Could you confirm if your boot volume is on that non-RAID disk (maybe 2 volumes on that disk and one of them is the boot volume)?
At current situation, first please test to connect the failed disk back to the device and see if it will help.
Or you may need to run a boot-up repair with an installation disk.
If you have any feedback on our support, please send to [email protected] -
Script stops automatically on windows server 2008, IE8 is not launched or it doesn't navigate
QTP 11.0 - Script stops automatically on windows server 2008, IE8 and works fine on other standalone machines having Windows 7. Pls advise. It is very weird, it suddenly stops launching IE8. Sometimes it launches IE8 but des not navigate from one step to another. I have scheduled it using a vbscript though windows scheduler. I tired to uninstall QTP, then reinstall, it works fine for first run but stops again.
To Wendy23,
Just for clarity, the Windows Server 2008 OS that I ran ROBOCOPY and XCOPY on was the non-R2 version. Microsoft might have fixed this issue in R2.
You'll probably need to logon as local Administrator or use an account belonging to the local Administrators group.
Also, open the Command Prompt using "Run as Administrator" (right-click on Command Prompt), then run the XCOPY and ROBOCOPY commands from within this prompt.
To answer G.Write, the storage is local hard disks.
Thanks, was a long time ago, I was having a problem with robocopy not copying permissions on a SAN, and was wondering if the SAN was the problem, but your method worked fine for me, thanks. -
Hello.
I'm running a tekkit classic (Minecraft) Server on a dedicated server I got from OVH, Im just wondering - Im currently using ClamAV for an antivirus, But I would like windows defender.
Im wondering if installing Desktop Experience on my dedi would increase processor usage or slow down the dedi even slightly.
System Specs:
RAM: 32GB DDR3 ECC 1600MHz
CPU: Intel Xeon E3-1245v2
HDD: 2x2TB SATA (Both used, specified as different drives)
OS: Windows Server 2008 R2 SP1
Theres only 1 indev tekkit server currently running on there, Im getting 0-5% processor usage. I may be setting up more modpack servers - but im wondering if installing desktop experience would increase the processor usage or slow the dedi down.
Thanks.
JosephHi Joseph,
This is the forum for Microsoft BizTalk Server, you've asked your question in the wrong forum.
I suggest posting your question in the Windows Server forum
http://social.msdn.microsoft.com/Forums/en-US/home#forum=winserver2008appcompatabilityandcertification&filter=alltypes&sort=lastpostdesc&content=Search
Glenn Colpaert - MCTS BizTalk Server - Blog : http://blog.codit.eu -
Windows Server 2008 xml sync not working
Windows Server 2008 message - xml sync has stopped working. this is preventing me from having my documents automatically upload to a client website for their viewing. these file are uploaded with FTP automatically when
printed form the computer. I will also get an error that SBS Console has stopped working and restart. The console will then work after clicking restart. These are probably related issues. Appreciate any step by step instructions to
get the XML Sync issue resolved so hopefully documents will upload again.Hi,
à
Windows Server 2008 message - xml sync has stopped working.
Would you please let me know more details of this issue? Please let me know the complete error message or provide
a screenshot of it. (please hide or remove all private and protected information.) Did you remember which specifc operation had been done before this issue occurred? For examples, install updates or install third-party applications?
à
I will also get an error that SBS Console has stopped working and restart.
For the SBS console issue, please follow the path:
C:\Program Files\Windows Small Business Server\Logs and check Console log file if find more relevant clues.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
I work in an Education environment with Windows Server 2008. I am trying to join our Macbooks to Active Directory. They are joined but the login is extremely slow. I read that this is because of a possible problem with an OS update.
Check the ethernet link speed when connected directly to the TC.. if you are plugged into the modem direct.. and comparing that with wireless on the TC we have no way of knowing where the issue is.
There is some issue related by someone when the TC was bridged.
It is extremely hard to impossible to know what is causing wireless slow down.. needs lots more info.
What is the link speed?
Set manually and try different channels.
The series 1 cannot do 2.4ghz and 5ghz simultaneously but test on 5ghz and see what the speed is like. You will need to be in the same room as the TC. -
Devfsadm not showing the external storage disk but able to see from OK
Hi,
I have an external storage disk.
Solaris 9 is running on E220R Sun server. I am able to view this disk from the OK prompt using probe-scsi-all.
I have installed SFS packages for V9 and the patches required also. MPXIO is also enabled on this server. But am not able to view this disk when i scan using devfsadm command from the os.
The HBAs are Qlogic 23xx. The driver used is 4.13.x
Please let me know if am missing anything.
Thanks
- Sarat.can u paste yr cfgadm -al output
try configuring the controller first , if it is unconfigure
also
luxadm -e port # to both cables are connected
luxadm probe # to see the luns
regards -
Windows XP SP2 did not find the bootcamp hard disk
after making the windows partition ( 32 GB) with boot camp ( version 2) assistant, I restart my Macbook ( hard disk is a SSD drive from Intel X-25 M) with my Windows Xp install cd. The drivers are loaded but at the end when we have to choose which hard disk to choose, Windows tells me he cannot find any hard disk.
when I return to the installed Mac OS X 10.5.6, I can see both my Mac hard disk and the bootcamp hard disk.
It seems that Mac OS does the work properly, but the drivers to enter the Windows set up are not loaded.
Any one has a suggestion to resolve this?please integrate intel ahci driver into your xp cd using winlite program.
-
Windows Backup for Windows Server 2008 R2 Standerd not working 2155348041
Hi
When I am running backups via the Backup server feature I keep getting the following error in the event log:
The backup operation that started at '2014-05-27T04:59:16.185618200Z' has failed with following error code '2155348041' (None of the source volumes were backed up.). Please review the event details for a solution, and then rerun the backup operation
once the issue is resolved.
The backup report gives me the following error:
the request could not be performed because of an i/o
I have tried using another Harddrive and have installed the Hotfix from windows but still get this error.
I also tried Re Installing the Backup feature this also did not work.
Regards
Roan_BHi,
Please run the command below to get the drive's sector size to check if the sector size is 512B. Windows Server Backup only support sector size of 512B.
wmic partition get BlockSize, StartingOffset, Name, Index
Backup fails with Error Code 2155348041
http://social.technet.microsoft.com/Forums/en-US/fa704bd6-b76a-42b4-b8cb-0a93ceb6ce43/backup-fails-with-error-code-2155348041
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Maybe you are looking for
-
Hello Every-time I try to run the software update I get a message saying Software update quit Unexpectedly. How can I solve this? Bellow please see the entire details of the error message, I dont know if it will help Regards Process: Software Update
-
How to export an interactive pdf from InDesign at a smaller file size.
I have a single page InDesign doc with a side navigation panel to the right of each page. This panel has interactive buttons created in InDesign. When I export as an interactive pdf, the file size is over 27MB and I need it to be much lower. I should
-
HT4890 How do I view pictures in photo stream online?
How do I view pictures online for photostream? I am so frustrated that I can't figure it out. Does anyone know?
-
How to change the "defualt language" on Voice Over?
I am a bit behind on the hardware (iPad 1) but only recently discovered the accessability options such as VoiceOver. When I gave the language rotors a go, after going around once it said "default language; Australian English." I do not see any point
-
Headset disconnect​s when dialing
Greetings, I have a BB Curve 8900 and for the last few months my headset/earbud connects when I turn it on, but when speed-dialing it disconnects. I have to turn the headset on then off to get it to work, while the call is dailing. I've tried this wi