Windows Server 2008 R2 Network Unauthenticated

Hi all,
So I have an odd problem. Wanted to see if anyone had any ideas. I have a client network that has Three locations. HQ, Branch 1 and Branch 2. All connected over IPSEC VPN Tunnels.
Each Branch Office has 1 domain controller. The HQ location has 1 DC and 1 Exchange server.
All of a sudden I noted the network Connection on the HQ DC had gone to unauthenticated. I worked on the issue and tried many different things to get it out of this state. Removed Nic Card drivers, reboots, Reset TCP Stack and Winsock Stack, changed Adaptors.
Just several different things I could think of and things I found. Nothing...
So next, This DC has all the FSMO Masters, so I transferred them to one of the branch servers and then demoted this DC. After the demotion, it rebooted and Unauthenticated was gone. Back to the Domain connection normal. I thought Great! So I ran DCPROMO
again and once it installed AD, and rebooted, Back to Unauthenticated again....
So Next, I removed AD again and this time I waited. Changed the other two DC's to look at the other. I unjoined the HQ Server. Then I went through DNS and removed all record of this server.
Next .. I rejoined the server. Network was good. Then ran DCpromo, and back to unauthenticated again.
Everything seems to work ok so far, but I am still worried about it as it should not be happening.
Any Ideas about this from anyone ?
Thanks for your help!

Hi Chris,
Sorry for the delay.
Due to these servers are connected by VPN and Kerberos uses connectionless UDP datagram packets, these UDP packets may be dropped.
We can change MaxPacketSize to 1 to force the clients to use Kerberos traffic over TCP.
To do this, follow these steps:
Important: Serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully.
Start Registry Editor.
Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Lsa\ Kerberos\Parameters
Note If the Parameters key does not exist, create it now.
On the Edit menu, point to New, and then click
DWORD Value.
Type MaxPacketSize, and then press ENTER.
Double-click MaxPacketSize, type 1 in the
Value data box, click to select the Decimal option, and then click OK.
Quit Registry Editor.
Restart your computer.
For detailed information, please click the link below,
How to force Kerberos to use TCP instead of UDP in Windows
http://support.microsoft.com/kb/244474/en-us
If issue persist, please try to run netlogon in debug mode. The debug log may give some hints.
For detailed information, please refer to the link below,
Enabling debug logging for the Net Logon service
http://support.microsoft.com/kb/109626/en-us
Best Regards.
Steven Lee
TechNet Community Support

Similar Messages

WDS Windows Server 2008 R2 network boot PXE x86 UEFI support?

Hi,
WDS Windows Server 2008 R2 network boot PXE x86 UEFI support?
-I have an SCCM 2012 SP1 site on Windows server 2008 R2.
-I have an HP ElitePAD 900 with Atom x86 processor, and I have some problem to deploy an OSD image to the ElitePAD.
Do I need WDS on an Server 2012 to get PXE x86 UEFI support with KB2817245?
http://support.microsoft.com/kb/2817245/en-us
/Per Sai
/SaiTech

Is this why I get this error with 2008R2?
Windows failed to start. A recent hardware or software change might be the cause. To fix it... <blahblah>
File:\Windows\System32\boot\winload.efi
Status: 0xc0000359
Thanks,
Jason

Windows Server 2008 R2 & Network speed

Today my server went slow. I've expreienced, that the network speed is very slow, and the average speed is around 200-500mpbs which is fine. Anyways from outside, the server is annoying slow, and speedtest.net shows quite good speed.
The game server is slow, website is slow, remote desktop connection, and the whole server is just slow, even the CPU usage is 0%, and RAM is around 9%
Specs: x4 Intel(R) Xeon(R) CPU X5355 @ 2.66GHz OS: Microsoft Windows Server 2008 R2 Standard 32GB DDR3 RAM
I'm running an MMORPG server on it. And I've never experienced such thing. I'm working with Windows Servers since 3 years.
I'm clueless now, and I don't know what's causing this annoying network issue. Do you have any ideas how to solve it?
Thanks.

Hi,
I don't think if there's any problem with my disk.
The whole system went slow, for example, now, my site takes around 30 secs to load, and before when I had no problems, it took max. 1 second.
Try out: http://4story.hitlan.net/index.php
Remote desktop, and the whole gameserver running on it are also slow. But there's 0% CPU usage:
http://i.imgur.com/ITzYGW7.png
The disk is also okay: http://i.imgur.com/jqyM5OR.png
If I ping the server, the average answer time is 62ms which is not the best, considering, that the server is located far away from me, it's OK.
I've asked the sponsor of my game server, and they says they doesn't see any problem.
And the most weird thing, that if I do a speedtest, it shows me around 200-400mpbs download speed, and the same upload speed.
I can't understand it how could it happen. Before everything was fast, and yesterday everything became slow. And not for only me, for everyone.
I really don't understand how it could happen, everything was fast, before, now everything went slow.

Windows Server 2008 R2 - You might not have permission to use this network resource. The request is not supported.

Hello !
I have a server with Windows Server 2008 R2 (AD, File Server, DNS Server and DHCP Server) that not access network share other Domain Controller.
Well, is very crazy.
I view network shares by network computers and devices,
but not \\domain_controller or \\IP_domain_controller.
I execute ping for succeed for all servers.
Follow error bellow:

irectory Server Diagnosis
Performing initial setup:
Trying to find home server...
* Verifying that the local machine SRVMTZDC01, is a Directory Server.
Home Server = SRVMTZDC01
* Connecting to directory service on server SRVMTZDC01.
* Identified AD Forest.
Collecting AD specific global data
* Collecting site info.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=shcorp,DC=local,LDAP_SCOPE_SUBTREE,(objectCategory=ntDSSiteSettings),.......
The previous call succeeded
Iterating through the sites
Looking at base site object: CN=NTDS Site Settings,CN=SAO,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=CWB,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=POA,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=RIO,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=VIX,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=SSA,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=FOR,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=BHZ,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=BSB,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=RCF,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=BEL,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
* Identifying all servers.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=shcorp,DC=local,LDAP_SCOPE_SUBTREE,(objectClass=ntDSDsa),.......
The previous call succeeded....
The previous call succeeded
Iterating through the list of servers
Getting information for the server CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC05,CN=Servers,CN=SAO,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC06,CN=Servers,CN=CWB,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC13,CN=Servers,CN=POA,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC07,CN=Servers,CN=RIO,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC08,CN=Servers,CN=VIX,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC09,CN=Servers,CN=SSA,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC12,CN=Servers,CN=FOR,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC04,CN=Servers,CN=BHZ,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC10,CN=Servers,CN=BSB,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVMTZDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVRCFDC11,CN=Servers,CN=RCF,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
* Identifying all NC cross-refs.
* Found 12 DC(s). Testing 1 of them.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\SRVMTZDC01
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
* Active Directory RPC Services Check
......................... SRVMTZDC01 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\SRVMTZDC01
Starting test: Advertising
The DC SRVMTZDC01 is advertising itself as a DC and having a DS.
The DC SRVMTZDC01 is advertising as an LDAP server
The DC SRVMTZDC01 is advertising as having a writeable directory
The DC SRVMTZDC01 is advertising as a Key Distribution Center
Warning: SRVMTZDC01 is not advertising as a time server.
The DS SRVMTZDC01 is advertising as a GC.
......................... SRVMTZDC01 failed test Advertising
Test omitted by user request: CheckSecurityError
Test omitted by user request: CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
......................... SRVMTZDC01 passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
Skip the test because the server is running FRS.
......................... SRVMTZDC01 passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... SRVMTZDC01 passed test SysVolCheck
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... SRVMTZDC01 passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Role Domain Owner = CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Role PDC Owner = CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Role Rid Owner = CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Role Infrastructure Update Owner = CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
......................... SRVMTZDC01 passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC SRVMTZDC01 on DC SRVMTZDC01.
* SPN found :LDAP/SRVMTZDC01.shcorp.local/shcorp.local
* SPN found :LDAP/SRVMTZDC01.shcorp.local
* SPN found :LDAP/SRVMTZDC01
* SPN found :LDAP/SRVMTZDC01.shcorp.local/SHCORP
* SPN found :LDAP/9956d321-332f-482c-855c-8bceee885bb6._msdcs.shcorp.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/9956d321-332f-482c-855c-8bceee885bb6/shcorp.local
* SPN found :HOST/SRVMTZDC01.shcorp.local/shcorp.local
* SPN found :HOST/SRVMTZDC01.shcorp.local
* SPN found :HOST/SRVMTZDC01
* SPN found :HOST/SRVMTZDC01.shcorp.local/SHCORP
* SPN found :GC/SRVMTZDC01.shcorp.local/shcorp.local
......................... SRVMTZDC01 passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC SRVMTZDC01.
* Security Permissions Check for
DC=ForestDnsZones,DC=shcorp,DC=local
(NDNC,Version 3)
* Security Permissions Check for
DC=DomainDnsZones,DC=shcorp,DC=local
(NDNC,Version 3)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=shcorp,DC=local
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=shcorp,DC=local
(Configuration,Version 3)
* Security Permissions Check for
DC=shcorp,DC=local
(Domain,Version 3)
......................... SRVMTZDC01 passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\SRVMTZDC01\netlogon
Verified share \\SRVMTZDC01\sysvol
......................... SRVMTZDC01 passed test NetLogons
Starting test: ObjectsReplicated
SRVMTZDC01 is in domain DC=shcorp,DC=local
Checking for CN=SRVMTZDC01,OU=Domain Controllers,DC=shcorp,DC=local in domain DC=shcorp,DC=local on 1 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=SRVMTZDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local in domain CN=Configuration,DC=shcorp,DC=local on 1 servers
Object is up-to-date on all servers.
......................... SRVMTZDC01 passed test ObjectsReplicated
Test omitted by user request: OutboundSecureChannels
Starting test: Replications
* Replications Check
* Replication Latency Check
DC=ForestDnsZones,DC=shcorp,DC=local
Latency information for 7 entries in the vector were ignored.
7 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=DomainDnsZones,DC=shcorp,DC=local
Latency information for 7 entries in the vector were ignored.
7 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Schema,CN=Configuration,DC=shcorp,DC=local
Latency information for 7 entries in the vector were ignored.
7 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Configuration,DC=shcorp,DC=local
Latency information for 7 entries in the vector were ignored.
7 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=shcorp,DC=local
Latency information for 7 entries in the vector were ignored.
7 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
......................... SRVMTZDC01 passed test Replications
Starting test: RidManager
* Available RID Pool for the Domain is 14100 to 1073741823
* SRVDC01.shcorp.local is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 11600 to 12099
* rIDPreviousAllocationPool is 11600 to 12099
* rIDNextRID: 11737
......................... SRVMTZDC01 passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: NtFrs
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... SRVMTZDC01 passed test Services
Starting test: SystemLog
* The System Event log test
An error event occurred. EventID: 0x00000422
Time Generated: 05/02/2014 12:55:01
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\shcorp.local\SysVol\shcorp.local\Policies\{1A69D491-B88A-4F66-B294-4ABEC8C62886}\gpt.ini from a domain controller and was not successful. Group
Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An error event occurred. EventID: 0x00000422
Time Generated: 05/02/2014 13:11:54
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\shcorp.local\SysVol\shcorp.local\Policies\{1A69D491-B88A-4F66-B294-4ABEC8C62886}\gpt.ini from a domain controller and was not successful. Group
Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
A warning event occurred. EventID: 0x80001083
Time Generated: 05/02/2014 13:18:00
Event String:
TCP/IP failed to establish an outgoing connection because the selected local endpoint was recently used to connect to the same remote endpoint. This error typically occurs when outgoing connections are opened and closed
at a high rate, causing all available local ports to be used and forcing TCP/IP to reuse a local port for an outgoing connection. To minimize the risk of data corruption, the TCP/IP standard requires a minimum time period to elapse between successive connections
from a given local endpoint to a given remote endpoint.
An error event occurred. EventID: 0xC0002719
Time Generated: 05/02/2014 13:20:41
Event String:
DCOM was unable to communicate with the computer 8.8.4.4 using any of the configured protocols.
An error event occurred. EventID: 0xC0002719
Time Generated: 05/02/2014 13:21:03
Event String:
DCOM was unable to communicate with the computer 8.8.8.8 using any of the configured protocols.
......................... SRVMTZDC01 failed test SystemLog
Test omitted by user request: Topology
Test omitted by user request: VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference)
CN=SRVMTZDC01,OU=Domain Controllers,DC=shcorp,DC=local and backlink on
CN=SRVMTZDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
are correct.
The system object reference (serverReferenceBL)
CN=SRVMTZDC01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=shcorp,DC=local
and backlink on
CN=NTDS Settings,CN=SRVMTZDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
are correct.
The system object reference (frsComputerReferenceBL)
CN=SRVMTZDC01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=shcorp,DC=local
and backlink on CN=SRVMTZDC01,OU=Domain Controllers,DC=shcorp,DC=local
are correct.
......................... SRVMTZDC01 passed test VerifyReferences
Test omitted by user request: VerifyReplicas
Test omitted by user request: DNS
Test omitted by user request: DNS
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : shcorp
Starting test: CheckSDRefDom
......................... shcorp passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... shcorp passed test CrossRefValidation
Running enterprise tests on : shcorp.local
Test omitted by user request: DNS
Test omitted by user request: DNS
Starting test: LocatorCheck
GC Name: \\SRVMTZDC01.shcorp.local
Locator Flags: 0xe00031bc
PDC Name: \\SRVDC01.shcorp.local
Locator Flags: 0xe00033fd
Time Server Name: \\SRVDC01.shcorp.local
Locator Flags: 0xe00033fd
Preferred Time Server Name: \\SRVDC01.shcorp.local
Locator Flags: 0xe00033fd
KDC Name: \\SRVMTZDC01.shcorp.local
Locator Flags: 0xe00031bc
......................... shcorp.local passed test LocatorCheck
Starting test: Intersite
Skipping site SAO, this site is outside the scope provided by the
command line arguments provided.
Skipping site Default-First-Site-Name, this site is outside the scope
provided by the command line arguments provided.
Skipping site CWB, this site is outside the scope provided by the
command line arguments provided.
Skipping site POA, this site is outside the scope provided by the
command line arguments provided.
Skipping site RIO, this site is outside the scope provided by the
command line arguments provided.
Skipping site VIX, this site is outside the scope provided by the
command line arguments provided.
Skipping site SSA, this site is outside the scope provided by the
command line arguments provided.
Skipping site FOR, this site is outside the scope provided by the
command line arguments provided.
Skipping site BHZ, this site is outside the scope provided by the
command line arguments provided.
Skipping site BSB, this site is outside the scope provided by the
command line arguments provided.
Skipping site RCF, this site is outside the scope provided by the
command line arguments provided.
Skipping site BEL, this site is outside the scope provided by the
command line arguments provided.
......................... shcorp.local passed test Intersite

How to restrict users working on Windows 7 clients from accessing Windows Explorer and other systems in the network through Group Policy with a domain controller running on Windows Server 2008 r2

Dear All,
We are having an infrastructure setup of around 500 client computers managed through group policy.
Recently the domain controllers have been migrated from Windows Server 2003 to Server 2008 R2.
Since this account requires extremely strict environment, we need to figure the solution for restricting the users from access anything locally.
It would be great if you can assist me with the following query.
How to restrict users logged on Windows 7 clients from accessing Windows Explorer and browsing other systems in the network through Group Policy with a domain controller running on Windows Server 2008 r2 ?
Can we disable Network Tab on the left hand pane ?
explorer.exe is blocked already, but users are able to enter the Windows Explorer by clicking on the name which is visible on the Start Menu.

>   * explorer.exe is blocked already, but users are able to enter the
>    Windows Explorer by clicking on the name which is visible on the
>    Start Menu.
You cannot block explorer.exe when you do not replace the shell - the
desktop you see effectively IS explorer.exe...
Your requirement sounds like you need a custom shell:
http://gpsearch.azurewebsites.net/#2812
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

File and printer sharing for Microsoft Networks on Windows server 2008

Hi Expert,
I found that the properties of File and printer sharing for Microsoft Networks service disabled after I install the windows server 2008 64bits. I tried to install that service via adding the file and printer sharing services in the properties of local area connection, but it doesn't contain any service in the popup box. Also, no such service file available in the disk when I tried to install the service from installation disk of windows server 2008 64bits. Is the file "sacsrv.dll" corresponding to the service name of file and printer sharing? I found it is in the directory of "Windows\system32". I have no idea about where is the problem? Do I miss some components? Please tell me what can I do for it? Thanks!
Best Wishes,

Do any experts know the reason of this problem? Thanks!

Error Code 0x80070035 - The network path was not found, Windows Server 2008 SP2

I have bee receiving following "error code 0x80070035 - The network path was not found" when trying to open file shares in both directions using Windows Server 2008 Standard SP2 at both ends. The issue is identical to the KB article KB958285, however the hotfix is only valid up to but not including SP2. One of the servers in question has moved several times between 2 subnets seperated by a VPN. I have tried changing settings in and around the local NIC/DNS Suffix and in the network connection sharing centre, but with no luck. Firewalls are turned off at both sites, and pings and AD queries are successful (one server is a DC). DNS is also working correctly at both sites. Any help/suggestions would be appreciated.
Richard

I thought I would add in another scenario, since this link came to the top of my list in the search engine.
We are running 2008 R2 with SP1 (it happened without SP1 as well)
We could not map using UNC (IP, FQDN, or netbios name). We could ping access the other servers via other utils like event viewer and services.msc but just could not map.
In our case it turned out to be a VMWARE issue but we still had to make a regedit change first
You have to go to regedit HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\NetworkProvider\Order\
And add LanmanWorkstation to Providerorder
I found on a Citrix board that citrix has an issue with this as well
If you're running VM here is an additional step you should do as well
When you upgrade VMware Tools installed with HGFS from ESX 3.x to ESX 4.x, the HGFS driver may not get uninstalled properly. In this case, the virtual machine's network Provider Order tab in Network Connections
> Advanced > Advanced Settings displays incorrect information and the virtual machine may lose network connectivity.
To avoid this issue, uninstall VMware Tools 3.x before installing VMware Tools 4.x.
To workaround this issue, if you have already upgraded VMware Tools:
Click Start >
Run, type regedit, and click OK. The Registry Editor window opens.
Navigate to
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\NetworkProvider\Order\.
Delete the reference to
hgfs.
Reboot the virtual machine.
We found that if you strip out the HGFS, you do not have to reboot for the provider order tab to come back
I hope that this saves people a lot of time. I spent days researching this.
This was the solution for me on 2008 R2 DC w/ Exchange. I do not have VMWare installed but do have Hyper-V. Thank you so much!

Adobe Acrobat 9.41 Pro+ on Snow Leopard 10.6.5 + Network users (Windows server 2008) = CRASH!

Adobe Acrobat 9.41 Pro will work “great” on the admin account, however through the active directory log on of network users, every user gets the long crash report upon opening the application.
Permissions are set so “everyone” can gain access, however the crash issue is not a decent setting on the Mac environment.
Will welcome any thoughts..comments… and suggestions.
Thank you-

OS: Snow Leopard 10.6.5
Active Directory Setup: Windows Server 2008 - Log in for network users
Adobe Acrobat: version crash 9.3 and 9.4.1
Admin of the Mac computer can log in and use the Adobe Acrobat Professional software, however when a network user
Tries to log on the computer and open the Adobe Acrobat 9.3 or 9.4 the software hangs....for 7-8 seconds then displays a crash report, and options are send to apple.
Permissions on every Adobe Acrobat folder on the computer are set to read/write for every user of the program.
Software Type: Using the DVD purchase with the Education program, and the serial number does accept, and download the software from the Adobe web page.
Emma McFaul

"Network Error - 53" while trying to mount NFS share in Windows Server 2008 client

CentOS | Windows 2008
I've got a CentOS 5.5 server running nfsd. On the Windows side, I'm running Windows Server 2008 R2 Enterprise. I have the "Files Services" server role enabled and both Client for NFS and Server for NFS are on.
I'm able to successfully connect/mount to the CentOS NFS share from other linux systems but am experiencing errors connecting to it from Windows. When I try to connect, I get the following:
C:\Users\fooadmin>mount -o anon 10.10.10.10:/share/ z:
Network Error - 53
Type 'NET HELPMSG 53' for more information.
(IP and share name have been changed to protect the innocent :-) )
Additional information:
I've verified low-level network connectivity between the Windows client and the NFS server with telnet (to the NFS on TCP/2049) so I know the port is open. I've further confirmed that inbound and outbound firewall ports are present and enabled.
I came across a
Microsoft tech note that suggested changing the "Provider Order" so "NFS Network" is above other items like Microsoft Windows Network. I changed this and restarted the NFS client - no luck.
I've confirmed that the share folder on the NFS server is readable/writable by all (777)
I've tried other variations of the mount command like: mount 10.10.10.10:/share/ z: and
mount 10.10.10.10:/share z: and mount -o anon mtype=hard \\10.10.10.10:/share * No luck.
As per the command output, I tried typing NET HELPMSG 53 but that doesn't tell me much. Just "The network path was not found".
I'm lost on how to proceed with troubleshooting. Any ideas?

There are usully two aspect that come to mind:
1. Syntax of mount command
2. Mismatch of NFS versions
Third reason is here
http://blogs.technet.com/b/sfu/archive/2011/11/21/getting-network-error-53-network-path-not-found-quot.aspx
Rgds
Milos

Unable to install lan realtek rtl8101 and network controller driver on windows server 2008

Hi Guys,
i am trying to install realtek rtl 8101 f amily driver and network controller driver on windows server 2008 but unable to install.
Hp device Model.:- hp pavilion g4 1303au
Model no.:- 5c03213jsh
network controller Device ID: PCI\VEN_168C&DEV_0032&SUBSYS_1785103C&REV_01\4&211965BF&0&0020
Name: PCI Device
Device ID: PCI\VEN_10EC&DEV_5209&SUBSYS_3564103C&REV_01\4&34BC5A71&0&0030
Name: SM Bus Controller
Device ID: PCI\VEN_1022&DEV_780B&SUBSYS_3564103C&REV_13\3&2411E6FE&0&A0
thanks,
Amit Rai

Hi:
SMBus controller:
Here is what I have done...I have zipped up and attached below under Attachments, the raw smbus controller driver files for you to unzip and manually install.
Download and unzip the file.
Go to the device manager and click on the smbus controller needing drivers. Click on the driver tab. Click on Update Driver.
Select the Browse my computer for driver software option and browse to the driver folder that you unzipped.
Make sure the Include Subfolders box is checked and the driver should install. Then reboot.
Ethernet: Download and install the 1st driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=7&Level=5&Conn=4&DownTy...
Card reader (PCI dev.): Download and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownT...
Wireless: You will have to try the Vista driver for the Atheros wireless card...
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&sp...
Attachments:
sp66185.zip ‏7 KB

Windows Server 2008 Standard Drivers for Intel I217LM Gigabit Network adapter

Hi everybody,
I am unable to find Network drivers for Intel® I217LM Gigabit Network adapter for Windows Server 2008 Standard (32-bit). I have found the drivers for Windows Server 2008 R2 but that being 64-bit do not work.Kindly help me in sorting out this problem as I
am stuck need to install the drivers.
Thanks in advance.
SHOAIB

Please post your question in Intel forums : https://communities.intel.com/community/tech/places
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Network troubleshooting service windows server 2008

Which network troubleshooting service/application not available on windows server 2008 by default ?

Hi,
Here is the information you may need,
Troubleshoot Windows Server 2008
http://technet.microsoft.com/en-us/library/cc753935(v=WS.10).aspx
Changes in Functionality from Windows Server 2003 with SP1 to Windows Server 2008
http://technet.microsoft.com/en-us/library/cc753208(v=ws.10).aspx
If there is any misunderstanding, please let us know what you would like to achieve.
Hope this helps.
Steven Lee
TechNet Community Support

Windows Server 2008 - password protect network folders

I was tasked to password protect a few folders that are being shared in the network. The folders are stored in the server (that i have admin access) and anyone in the network have full access to the folders and the files inside those folders. The computers linked in the network have different OS - 3 running vista, 2 running xp and 1 windows server 2008. Anybody in the office can use the computers without being prompted for a password (except the server) and the folders are accessible through any of those computers.
The following are my questions:
1. Is it possible to password protect folders shared in the network? If so, if someone wants to access those password protected folder through any of the computers connected to the network, will they be prompted to enter a password to be able to access it or the system will just say "access denied?" If so, please give detailed instructions on how to do it.
2. If it is possible to password protect network folders, is it possible to put different passwords on each folders? If so please give detailed instructions on how to do it.
3. If it is not possible to do any of the mentioned above through windows, is it possible with the use of a third-party software? If so, what are those third party software?

Hi All, First time on this forum and am finding it very interesting (sorry about the proposed as answer above.. hit the wrong key).
I found this topic particularly interesting and am looking to do a similar thing but seemed to have gotten around it quite easily (if I am on the same lines as greggync777 that is).
My problem is this I have a Home Theatre Network set up in my lounge to several locations around the house with around 8 gb of videos/music/pics etc, all works fine on connected pc's with WMC (all using Windows 7) and all is shared by family for entertainment.
I also have a Seperate workstation where I do my work (video editing) which involves storing considerable amounts of footage and more importantly all the work files/folders all of which is confidential, at the moment is also on a seperate pc which also houses 8 hdd with around 6gb of ever growing video information.
My point is that both these PC's ( HTPC and my WORKSTATION) are a bit too noisy despite having installed the best I can afford fans/Samsung eco green hdd's. My desire is to build a main super server running WHS 2008 (The size/Cooling/Noise etc is not a problem due to where it will be located). My main concern is Security with so many in the family having direct access to the Server so I want to restrict which files/folders they can subsequently access once there. I want to be the only one to have access to my work from my PC and everyone else denied access. I have set up a test rig running WHS08 and have set up access with several PC's using passwords for the server etc which was straightforward after creating a user account for them on whs08, therein laid the problem of then how to keep them from accessing my side of the server which is when I hit up on this thread after much searching. Following one of the suggestions above I went to the folder in question (in my case this will be a plus as all my work will be in one main folder with several thousand sub folders) to the security tab/permissions etc and firstly removed access to everyone except the server administrator. I then granted access only to one PC on the network - the one that is my workstation together with a password ( I meant to say upto this point everyone I had given access to the server could access my test folder), went back to my PC and was able to access as normal after entering the password. I then went to every other PC on the network (that has access to the Server) where I am pleased to say all denied me access to my folder. (my work pc by the way is running XPsp3). Not sure if it will work for Greggync777 or if it what he is looking to do but it did for me. I apologise also if I have rambled on a bit for my first thread.
tks Dave

Windows server 2008 R2 browsing the network

We just migrated to Server 2008 R2 and now we are having network browsing issues
When searching computers can only see local cannot search on different subnets?
Our CEO I sold school and like to browse the network to connect to a server and when he is not at the headquarters he no longer can browse computers at the headquarter location?
Is this a Bug or a service?
If you try and search for a computer name it also does not work can only search for local computers
if you type the computer name directly in my computer it works and you can connect
This topic first appeared in the Spiceworks Community

Hi,
This issue occurs because the IPAddress registry entries at the following location are incorrectly overwritten by a newly added IP address instead of the whole list of IP addresses:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Tcpip\Parameters\Interfaces\<GUID>
Note <GUID> is a placeholder for the GUID of the network adapter that is encountering the issue.
More information and a hotfix, please check the below KB:
Some IP addresses on a network adapter are lost after you restart a computer that is running Windows Server 2008 or Windows Vista if the buffer being used on the network adapter becomes insufficient
http://support.microsoft.com/kb/982931
Hope this helps
Best rehards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Why My IMAC OS X 10.6.8 Become Slow On The Network Between Window Server 2008

Dear Sir,
I am using IMAC 10.6.8, processor 3.06 GHz Intel Core i3, Memory 4GB 1333 MHz DDR3 and now my lovely IMAC become slow on the network between window server 2008 and my IMAC.
Kindly advise for the above said issue how can I fix it. I already disable in my IMAC IPV6 and I am connect with airport not ethernet cable and my WIFI is LINKSYS modem and all other windows PC's are connected with the Gigabyte switch.
Awaiting your soonest reply.

Dear Sir,
I am using IMAC 10.6.8, processor 3.06 GHz Intel Core i3, Memory 4GB 1333 MHz DDR3 and now my lovely IMAC become slow on the network between window server 2008 and my IMAC.
Kindly advise for the above said issue how can I fix it. I already disable in my IMAC IPV6 and I am connect with airport not ethernet cable and my WIFI is LINKSYS modem and all other windows PC's are connected with the Gigabyte switch.
Awaiting your soonest reply.

Windows Server 2008 R2 Network Unauthenticated

Similar Messages

Maybe you are looking for