Windows Server 2008 R2 Profile Creation

We do not use roaming profile instead we use local profile. Unfortunately, this is happening on one of the server that it does not get created fully. For some users the user profile is complete, for some users the user profile is not complete. For example
we want to find some debug files that are written onto users "My Documents" folder under users profile. We cannot find this folder and several other folders that would get created when the profile gets created. Due to which we are unable to get the
debug file.It looks like a permissions issue, but I am not sure. Any resolution that would help in resolving this would be great.
thank you in advance

Hi,
Just additional.
Based on your description, would you please let me confirm something? Did you mean that you can find those debug files in the local profile of some users? However, for other
users, we can’t find?
When you logon as an administrator, did this issue still persists?
Regarding to those users who can’t find debug files, please check if you can find some common features among them. For example, did they belong to the same group? If anything
you can find, please don’t hesitate to let us know.
Hope this helps.
Best regards,
Justin Gu

Similar Messages

When trying to start my Windows server 2008 R2 Data Center, I am getting "ramdisk device creation failed due to insufficient memory",

I have the following:-
VMWare workstation version 9 , with windows server 2008 R2 data center installed.
- I have installed the windows 2008 R2 inside the VM using an iso image.
- The host is windows 7.
I use to work well with the VM, but after adding a new VM to the same workstation . I start getting the following error when starting my old VM
ramdisk device creation failed sue to insufficient memory.
And on the windows boot manger screen they mentioned to :-
inset my windows installation dis and restart my PC.
click “repair your computer”
but not sure if this will fix the problem , baring in mind that the RAM assigned to the VM
is 24 GB & 80 GB hard disk.
The error is
Link.
so can any one advice what is causing this error?
Thanks

You might start by checking the RAM.
http://windows.microsoft.com/en-US/windows7/Diagnosing-memory-problems-on-your-computer
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Problem In Data Base Creation... Oracle 10g server in windows server 2008

I have installed Oracle 10g server in windows server 2008 and the domain & active directory r created now i am trying to create the databse i am getting usual error (tns protocol adapter error ) in the 2% i have removed the domain and the active directory from windows then i created but this is not a solutions i need to create the data base in the domain server...

this is a forms forum.
please post in Database Installation

Windows Server 2008 SP2 X86 Product Key Issue

I am trying to create a VM using a Template, but facing an issue with respect to Product Key. The VHD I am using is of
Windows Server 2008 SP2 X86. If I do not provide Product Key in the Template/Guest OS Profile, the Virtual Machine creation fails even before starting. Seeing this behavior, I added a dummy key to the Guest OS Profile/Template which allowed
me to deploy the machine, but the VM gets stuck at Customization before failing. When I take the remote console of the VM, the Error I see at the Remote Console is:
Windows could not parse or process the unattend answer file for pass. The settings specified in the answer files cannot be applied. The error was detected while processing settings for component [microsoft-windows-shell-setup]"
So, I am confused now what to do.
Is dummy key supported?
Do I need to provide the actual key in the Template/Guest OS Profile?

You should be able to evaluate this software for 180 days.
Here are some info:
http://portal.sivarajan.com/2010/10/windows-2008-r2-evaluation-period-and.html
http://portal.sivarajan.com/2010/08/verify-and-extend-windows-2008.html
Santhosh Sivarajan | MCTS, MCSE (W2K3/W2K/NT4), MCSA (W2K3/W2K/MSG), CCNA, Network+ Houston, TX
Blogs - http://blogs.sivarajan.com/
Articles - http://www.sivarajan.com/publications.html
Twitter: @santhosh_sivara - http://twitter.com/santhosh_sivara
This posting is provided AS IS with no warranties, and confers no rights.

Error While Creating Windows Server 2008 SP2 32-BIT Virtual Machine

I am facing an error while creating a Virtual Machine on the Cloud. The Error is below:
Error (610)
Virtual Machine Manager was unable to find a value for the required Sysprep parameter ProductKey.
Recommended Action
Add the missing Sysprep parameter either to the answer file or to the operating system configuration, and then try the operation again.
My Template does not have the Product Key defined. The OS is Windows Server 2008 SP2 32-BIT. Is defining Product Key absolutely necessary? I have other Templates for other Operating Systems and they are working fine. Only facing problem
with this.
Any help would be appreciated.

In the SCVMM world a 'template' is composed of the following: a VHD with an OS that has been generalized (sysprep), virtual hardware profile (settings), and an OS profile.
The OS profile is required to have a product key. A MAC activation key at the minimum. But the key is required.
If you deploy a VM from a VHD, the same customization assumptions are not at play. Which is why it succeeds. (there is no template in this case, there is also no requirement that the OS in the VHD be sysprep'd).
SCVMM has rules. And lots of things don't make sense until you begin to understand them and play within them. (I am not saying that the SCVMM rules are a good thing, just saying they exist)
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Problems LMS-4.2 Installation on Windows Server 2008 R2 Enterprise SP1

Hi all,
During the installation of the LMS-4.2,
It passed the "Initializing" and "Copying" stages,
but, in the "Configuring", it never finishes,
Anyone had have a similar problem?
the installer is for - LMS-4.2 and the OS is Windows Server 2008 R2 Enterprise SP1

Thanks for the update. Glad to know it has installed now.
There can be some port clashes and resource scarcity when other applications may be using it. Hence we recommend to have majorly LMS as the primary software on the server's.
Also, LMS is not supported in other languages installers or setups except English and Japanese.
There are a couple more things you can do/check prior to running the installation.
LMS generally need Naming convention to handle long names/path etc. By default C: has 8.3 Naming convention enabled. However if you installed on different drive (for eg E:), for which this may be disabled.
To check naming convention you can run the following command from Windows Command prompt:
cmd>fsutil.exe 8dot3name query <Drive>
Example:
C:\Users\winlau>fsutil 8dot3name query C:
The volume state for Disable8dot3 is 0 (8dot3 name creation is enabled).
The registry state of NtfsDisable8dot3NameCreation is 2, the default (Volume level setting).
Based on the above two settings, 8dot3 name creation is enabled on C:.
8dot3 needs to be enabled for all drives LMS will potentially use, including:
Drive where TEMP/TMP is located
The drive LMS is installed to
The drive LMS backs up to
Drive used for a relocated RME Shadow directory or other nonstandard paths written to.
In some cases, altering the TEMP and TMP variables to be a short path (eg C:/temp or C:/tmp) may avoid the issue, but not always.
Hence, to be safe, it is best to enable 8dot3name creation globally, either via the registry or Windows CLI
Sample command to enable globally:
"fsutil 8dot3name set 0"
Sample command to enable on one volume:
"fsutil 8dot3name set X: 0"
Note that this needs a reboot to take effect. You should not disable 8dot3name creation which already has it enabled, especially the system volume (usually C:).
For further information http://technet.microsoft.com/en-us/library/cc778996%28v=ws.10%29.aspx
-Thanks
Vinod
**Encourage Contributors. RATE them**

Oracle DB 10g XE on Windows Server 2008 R2 64bit

Hello to everybody!
I have and old pc with Windows Server 2003 (32 bit) where i've installed Oracle DB 10g XE. Everything works fine.
Now i have to migrate the DB from that old machine to a new one with Windows Server 2008 R2 64bit.
I've tryied to install the Oracle DB 10g XE into the new server but, after installation is finished, i wasn't able to open the DB homepage at http://127.0.0.1:8080/apex. It said "This page can't be displayed". I try with SQLPLUS but after i insert the admin credentials i obtain these lines:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Where can be the problem?

>> ORA-01034: ORACLE not available
Database is not running. Most likely the installer did not complete all its tasks, it can happen.
For windows, the database service has to be set up (see Start/Run/services.msc), services started, installer creates the database, and quite a few other setup chores. If the database creation fails, all the other stuff is not relevant.
Under the <drive:>oraclexe folder there *should* be a datafiles (*.DBF) files somewhere. Can't recall the exact location for 10g. Try file explorer and a search for *.dbf files, that will probably come up empty.
Note the requirements, at Oracle&reg; Database Express Edition it calls for x86, not x64. The 11g XE also has lots of trouble getting a successful install on x64 as well, note the Download page states "does not work on x64" although some folks have gotten it to work.Try the deinstall steps, and use a right click/run as Administrator that *might* get past the UAC glitch that happens on the later OS versions.

Problem of SAPConsle 7.10 (Patch 13) on Windows server 2008 R2 (64bit)

My company is moving from server 2003 to Server 2008 R2 (64bit). We installed SAPConsole 7.10 (Patch level 13) on test server without any problem and configured the profiles in SAPConsole administrator. However when we running the sapcnsl.exe from command prompt, it prompt with error message "*** ERROR => ***AgCom (006FC558): Error: Internal error" and failed to get the SAP login screen.
I checked SAP Note 1043241 saying SAPConsole 710 as patch level 7 could support Windows server 2008 (32/64bit) both.
Can anyone help advise on my issue? or is there anyone has testl the SAPConsole 710 on Server 2008 R2 64bit successfully?
Thank you very much!

Hello Jackcd,
I am not an expert in this area but I did a message search for "AgCom error internal error" and I found a message where the customer solved the problem by using a patch. In the customers own words:
"I installed sapgui 7.10 Patch level 6 on the server where I installed SAPCONSOLE 7.10. Now, the sapconsole working."
The Sapinator

Windows Server 2008 R2 Backup failing with error - 0x8004231F

Hi,
I have Windows Server 2008 R2 Web Edition. Everything was working fine until recently. I tried checking for the log files, but I see that there are no log files that are created now in the location C:\Windows\Logs\WindowsServerBackup. The only files that
are being created recently are of the type mentioned below.
Wbadmin.1.etl
WbadminUI.0.etl
etc.
I tried removing the old backup and starting a new backup. But, even now it is failing with the same error.
When running the backup from the PowerShell, the output is as below.
PS C:\Users\administrator> Wbadmin start backup -backupTarget:\\localhost\E$\WindowsImageBackup\Server01 -systemState -vss
Copy
wbadmin 1.0 - Backup command-line tool
(C) Copyright 2004 Microsoft Corp.
Note: The backed up data cannot be securely protected at this destination.
Backups stored on a remote shared folder might be accessible by other
people on the network. You should only save your backups to a location
where you trust the other users who have access to the location or on a
network that has additional security precautions in place.
Retrieving volume information...
This will back up volume System Reserved (100.00 MB) (Selected Files),SAN(I:) (Selected Files),Local Disk(C:) (Selected
Files) to \\localhost\E$\WindowsImageBackup\Server01.
Do you want to start the backup operation?
[Y] Yes [N] No y
The backup operation to \\localhost\E$\WindowsImageBackup\Server01 is starting.
Starting to back up the system state [12/8/2013 9:29 AM]...
Creating a shadow copy of the volumes specified for backup...
Creating a shadow copy of the volumes specified for backup...
Creating a shadow copy of the volumes specified for backup...
Summary of the backup operation:
The backup of the system state failed [12/8/2013 9:30 AM].
Log of files successfully backed up:
C:\Windows\Logs\WindowsServerBackup\Backup-08-12-2013_09-29-49.log
Log of files for which backup failed:
C:\Windows\Logs\WindowsServerBackup\Backup_Error-08-12-2013_09-29-49.log
There is not enough disk space to create the volume shadow copy on the storage location. Make sure that, for all volumes
to be backup up, the minimum required disk space for shadow copy creation is available. This applies to both the backup
storage destination and volumes included in the backup.
Minimum requirement: For volumes less than 500 megabytes, the minimum is 50 megabytes of free space. For volumes more th
an 500 megabytes, the minimum is 320 megabytes of free space.
Recommended: At least 1 gigabyte of free disk space on each volume if volume size is more than 1 gigabyte.
ERROR - A Volume Shadow Copy Service operation error has
occurred: (0x8004231f)
Insufficient storage available to create either the shadow copy storage file or other shadow copy data.
If you see the free space available in each of the drives, they are in plenty.
C:\ 7.5 GB free of 70 GB
E:\ 250 GB free of 499 GB
I:\ 86.7 GB free of 350 GB
I am out of any hints on how I can proceed now. Has any one had similar issues? Can any one give any hint on this? Thanks.
Thanks.

Some Additional info.
Shadow Copy Storage association
   For volume: (\\?\Volume{a9fb0474-f1bd-11e0-b235-806e6f6e6963}\)\\?\Volume{a9f
b0474-f1bd-11e0-b235-806e6f6e6963}\
   Shadow Copy Storage volume: (\\?\Volume{a9fb0474-f1bd-11e0-b235-806e6f6e6963}
\)\\?\Volume{a9fb0474-f1bd-11e0-b235-806e6f6e6963}\
   Used Shadow Copy Storage space: 0 B (0%)
   Allocated Shadow Copy Storage space: 0 B (0%)
   Maximum Shadow Copy Storage space: 32 MB (32%)
Shadow Copy Storage association
   For volume: (I:)\\?\Volume{ddf6a51c-1282-11e3-b291-000c293b01d1}\
   Shadow Copy Storage volume: (I:)\\?\Volume{ddf6a51c-1282-11e3-b291-000c293b01
d1}\
   Used Shadow Copy Storage space: 0 B (0%)
   Allocated Shadow Copy Storage space: 0 B (0%)
   Maximum Shadow Copy Storage space: 35 GB (10%)
Shadow Copy Storage association
   For volume: (E:)\\?\Volume{0e3bf713-125d-11e3-b2dd-000c293b01bd}\
   Shadow Copy Storage volume: (E:)\\?\Volume{0e3bf713-125d-11e3-b2dd-000c293b01
bd}\
   Used Shadow Copy Storage space: 0 B (0%)
   Allocated Shadow Copy Storage space: 0 B (0%)
   Maximum Shadow Copy Storage space: 149.999 GB (30%)
Shadow Copy Storage association
   For volume: (C:)\\?\Volume{a9fb0475-f1bd-11e0-b235-806e6f6e6963}\
   Shadow Copy Storage volume: (C:)\\?\Volume{a9fb0475-f1bd-11e0-b235-806e6f6e69
63}\
   Used Shadow Copy Storage space: 0 B (0%)
   Allocated Shadow Copy Storage space: 0 B (0%)
   Maximum Shadow Copy Storage space: 4.99 GB (7%)
Hope this might also help you experts to get a little more information.

How do I use long path names ("\\?\UNC\...") with Server 2008 roaming profiles?

Hey folks!
I administrate a Windows Server 2008 R2 SP1 Domain with about 40 users on
Windows 7 SP1 clients. Because the users often switch between the many PCs, I am using Roaming Profiles which tend to produce errors with different application-specific paths and files inside the users profiles.
As one of many example, our standard mail application Thunderbird produces paths and files according to folders/subfolders and mails in a user's mailbox. Another one is Microsoft Office's Auto Recovery files which reside in a user's profile and can
get very long.
These paths and filenames often extend the allowed max. path of about 256 characters, when (on log on or off) the synchronization process between the client and the server takes place, leading to errors in the event log and a notification to the user about
the conflict:
"Event ID 1509 - Windows cannot copy file \\server\share\users\user123.v2\AppData\Roaming\looooong to location C:\Users\user123\AppData\Roaming\looooong. DETAIL - The filename or extension is too long."
In the long run this leads to different file versions on different clients which - in the case of Thunderbird - leads to missing mails.
After extensive searches and lectures of forums - including this - I haven't found a solution for this problem.
So my question is if there's a way to use the extended max path with roaming profiles and if so how do I get it to work?
I tried changing the profile path of a test user in the Active Directory user preferences from "\\server\share\profiles\test_user" to something like "\\?\UNC\server\share\profiles\test_user" without any changes in the system's behavior.
Also I think that because this is such a fundamental problem somebody must have come up with a solution for it...
Thanks in advance,
Nico

Hi,
Thanks for your posting.
The Event 1509 can happen if the destination path of the users profile is on a server with a long name and share folder name. For detail information, please refer to:
User profile cannot be loaded with Event ID 1509, DETAIL - The filename or extension is too long
http://blogs.technet.com/b/win7/archive/2011/02/15/user-profile-cannot-be-loaded-with-event-id-1509-detail-the-filename-or-extension-is-too-long.aspx
User profile cannot be loaded with Event ID 1509, DETAIL - The filename or extension is too long
http://support.microsoft.com/kb/2536571
Hope this helps.
Regards.
Vivian Wang
TechNet Community Support

Error on clone database, oracle 10g release 2 for windows server 2008

Hi,
OS: Windows Server 2008 X64
Oracle: oracle 10g release r2 for windows server 2008
An error occurred when creating a database, stop at last step, Screenshot:
[http://temp.wsria.com/oracle_create_db.png|http://temp.wsria.com/oracle_create_db.png]
the trace log content:
[main] [9:56:35:982] [CommandLineArguments.process:563] CommandLineArguments->process: number of arguments = 32
[main] [9:56:35:982] [CommandLineArguments.process:738] CommandLineArguments->process: Create Database argument is specified
[main] [9:56:35:982] [CommandLineArguments.process:910] CommandLineArguments->process: template Name argument is specified
[main] [9:56:35:982] [CommandLineArguments.process:960] CommandLineArguments->process: db name argument is specified
[main] [9:56:35:982] [CommandLineArguments.process:3074] CommandLineArguments->process: in Operation Type is Creation/GenerateScripts Mode condition
[main] [9:56:35:997] [CommandLineArguments.process:3298] CommandLineArguments->process: Successfully process command line arguments
[main] [9:56:36:668] [Host.checkOPS:2055] Inside checkOPS
[main] [9:56:36:668] [Host.checkOPS:2067] Trying to check cluster existence
[main] [9:56:36:715] [Library.getInstance:97] Created instance of Library.
[main] [9:56:36:715] [Library.load:197] Loading orauts.dll...
[main] [9:56:36:715] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
[main] [9:56:36:715] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
[main] [9:56:36:715] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\orauts.dll
[main] [9:56:36:715] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\orauts.dll from path=
D:\oracle\product\10.2.0\db_1\bin
[main] [9:56:36:715] [Library.load:197] Loading MSVCRT.dll...
[main] [9:56:36:715] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
[main] [9:56:36:715] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
[main] [9:56:36:715] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\MSVCRT.dll
[main] [9:56:36:731] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\MSVCRT.dll from path=
D:\oracle\product\10.2.0\db_1\bin
[main] [9:56:36:731] [Library.load:197] Loading orawsec10.dll...
[main] [9:56:36:731] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
[main] [9:56:36:731] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
[main] [9:56:36:731] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\orawsec10.dll
[main] [9:56:36:731] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\orawsec10.dll from path=
D:\oracle\product\10.2.0\db_1\bin
[main] [9:56:36:731] [Library.load:197] Loading orasrvm10.dll...
[main] [9:56:36:731] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
[main] [9:56:36:731] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
[main] [9:56:36:731] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\orasrvm10.dll
[main] [9:56:36:731] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\orasrvm10.dll from path=
D:\oracle\product\10.2.0\db_1\bin
[main] [9:56:36:731] [Version.isPre10i:189] isPre10i.java: Returning FALSE
[main] [9:56:36:731] [WindowsSystem.regKeyExists:1006] WindowsSystem.regKeyExists: mainkey= HKEY_LOCAL_MACHINE subkey = Software\Oracle\Ocr
[main] [9:56:36:746] [WindowsSystem.getCSSConfigType:1163] configType=null
[main] [9:56:36:746] [Host.checkOPS:2073] cluster existence:false
[main] [9:56:36:746] [Host.checkOPS:2111] Cluster installed=false
[main] [9:56:36:902] [InitParamHandler.endElement:506] CustomSGA flag: false
[main] [9:56:36:902] [InitParamHandler.endElement:507] Database Type: MULTIPURPOSE
[main] [9:56:36:918] [InitParamHandler.endElement:508] Mem Percentage: 40
[main] [9:56:36:918] [InitParamHandler.endElement:526] distributing Memory: 13737443328
[main] [9:56:36:918] [MemoryCalculator.calculateMemory:122] Setting SGA to MAX_SGA 1610612736
[main] [9:56:36:918] [StorageAttributes.setAttribute:232] IN threadID:1 group#=1
[main] [9:56:36:918] [StorageAttributes.setAttribute:232] IN threadID:1 group#=2
[main] [9:56:36:918] [StorageAttributes.setAttribute:241] Current threadID=1
[main] [9:56:36:918] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[0]=1
[main] [9:56:36:918] [StorageAttributes.setAttribute:258] vRedoGroups:[1]
[main] [9:56:36:918] [StorageAttributes.setAttribute:288] setAttribute: bExists=false
[main] [9:56:36:918] [StorageAttributes.setAttribute:232] IN threadID:1 group#=3
[main] [9:56:36:918] [StorageAttributes.setAttribute:241] Current threadID=1
[main] [9:56:36:918] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[0]=1
[main] [9:56:36:918] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[1]=2
[main] [9:56:36:918] [StorageAttributes.setAttribute:258] vRedoGroups:[1, 2]
[main] [9:56:36:933] [StorageAttributes.setAttribute:288] setAttribute: bExists=false
[main] [9:56:36:933] [TemplateManager.parseCloneTemplate:1477] See for any transportable datafiles in TemplateManager.....
[main] [9:56:36:933] [TemplateManager.isInstallTemplate:2178] Selected Template by user:=General Purpose
[main] [9:56:36:933] [TemplateManager.isInstallTemplate:2185] The Message Id to be searched:=GENERAL_PURPOSE
[main] [9:56:36:933] [TemplateManager.parseCloneTemplate:1489] create new clone data file for tp file.......
[main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7184] setupOIDCommandlineParameters:
[main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7185] m_regWithdirService: false
[main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7186] m_unregWithdirService: false
[main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7187] m_updateDirService: false
[main] [9:56:36:933] [Verifier.processRawConfigFile:3523] StorageType == 0
[main] [9:56:36:933] [Verifier.setOradataDest:4349] setOradataDest:dfDest=D:\oracle\product\10.2.0\oradata
[main] [9:56:36:933] [TemplateManager.updateDatafileDestination:1957] updateDatafiles:datafileDir=D:\oracle\product\10.2.0\oradata
[main] [9:56:36:933] [TemplateManager.updateDatafileDestination:2103] From template, RedoLogGrName=1
[main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2118] new file name redo01.log
[main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2103] From template, RedoLogGrName=2
[main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2118] new file name redo02.log
[main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2103] From template, RedoLogGrName=3
[main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2118] new file name redo03.log
[main] [9:56:36:965] [ProgressOnlyHost.performOperation:162] processRawConfigFile=false
[main] [9:56:36:965] [Verifier.validateTemplate:1629] StorageType == 0
[main] [9:56:36:965] [ProgressOnlyHost.performOperation:178] validateTemplate=true
[main] [9:56:36:965] [OracleHome.isRacEnabled:149] bRacOn = false
[main] [9:56:36:980] [Verifier.validateTemplate:1629] StorageType == 0
[main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.getControlfFileSizes:3001] No. of Control files:=3
[main] [9:56:37:105] [Host.executeSteps:4044] Executing steps....
[main] [9:56:37:105] [Host.setUpForOperation:2920] setUpForOperation: Mode = 128
[main] [9:56:37:121] [Host.executeSteps:4186] setupForOperation returned: true
[main] [9:56:37:121] [Host.createStepSQLInterface:5948] sid =ora10g
[main] [9:56:37:136] [SQLEngine.initialize:242] Execing SQLPLUS/SVRMGR process...
[main] [9:56:37:136] [SQLEngine.initialize:270] m_bReaderStarted: false
[main] [9:56:37:136] [SQLEngine.initialize:274] Starting Reader Thread...
[Thread-4] [9:56:37:355] [StepContext$ModeRunner.run:2478] ---- Progress Needed:=true
[Thread-4] [9:56:37:464] [BasicStep.execute:202] Executing Step : CLONE_DB_CREATION_RMAN_RESTORE
[Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01092
[Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01034
[Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-03114
[Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-12560
[Thread-4] [9:56:37:464] [StepErrorHandler.setIgnorableErrors:250] setting Ignorable Error: ORA-01109
[Thread-4] [9:56:37:464] [BasicStep.configureSettings:304] messageHandler being set=null
[Thread-4] [9:56:37:464] [BasicStep.execute:202] Executing Step : INSTANCE_CREATION
[Thread-4] [9:56:37:464] [BasicStep.configureSettings:304] messageHandler being set=null
[Thread-4] [9:56:37:479] [InitParamAttributes.sortParams:3532] m_sortOn:-1 sortOn:4
[Thread-4] [9:56:37:620] [OracleHome.isRacEnabled:149] bRacOn = false
[Thread-4] [9:56:37:667] [Host.noEntryinOratab:5115] Check made for oratab arg passed............
[Thread-4] [9:56:37:667] [Oradim.getAddEntryCommand:353] AddEntry=[D:\oracle\product\10.2.0\db_1\bin\oradim.exe, -new, -sid, ORA10G, -startmode, manual, -spfile]
[Thread-4] [9:56:38:899] [Oradim.getEditEntryCommand:422] getEditEntry cmd=[D:\oracle\product\10.2.0\db_1\bin\oradim.exe, -edit, -sid, ORA10G, -startmode, auto, -srvcstart, system]
[Thread-4] [9:56:39:55] [Oradim.addSidToRegistry:871] oracleHomeKey: SOFTWARE\ORACLE\KEY_OraDb10g_home1
[Thread-4] [9:56:39:117] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@c73f0d8
[Thread-4] [9:56:39:117] [CloneRmanRestoreStep.executeImpl:217] Instance Creation went fine..........
[Thread-4] [9:56:39:117] [CloneRmanRestoreStep.executeImpl:224] db_recovery_file_dest=D:\oracle\product\10.2.0\flash_recovery_area
[Thread-4] [9:56:39:117] [CloneRmanRestoreStep.executeImpl:227] db_recovery_file_dest_size=2147483648
[Thread-4] [9:56:39:991] [SQLEngine.setSpool:1750] old Spool = null
[Thread-4] [9:56:39:991] [SQLEngine.setSpool:1751] Setting Spool = D:\oracle\product\10.2.0\db_1\cfgtoollogs\dbca\ora10g\CloneRmanRestore.log
[Thread-4] [9:56:39:991] [SQLEngine.setSpool:1752] Is spool appendable? --> true
[Thread-4] [9:56:39:991] [CloneRmanRestoreStep.executeImpl:320] starting with pfile=D:\oracle\product\10.2.0\admin\ora10g\pfile\init.ora

Check your SQLNET.AUTHENTICATION_SERVICES settings in sqlnet.ora file.
ORA-28547 : Connection to server failed, probable Net8 admin error
thanks
http://swervedba.wordpress.com/

Oracle 11.2.0.3 on Windows Server 2008 R2 64-bit

Good night Oracle community,
I'm having problems on using Oracle 11.2.0.3 on Windows Server 2008 R2 64-bit that runs inside a virtual machine.
The first problem was the error ORA-12152 (unable to send break message) when using a 32-bit server version when trying to connect via SQLPlus using domain administrator user. I did reboot, tnsping, checked parameters and oracle support articles but neither help me. So I uninstalled it and installed the 64-bit version and it wasn't possible to run the applications like netca.
Now I installed it on a local profile version 32-bit to see if the problem was related to the domain.
My question is simple: is this environment ok to run a production database server? 11.2.0.3 is that stable with Windows 2008?
Thank you very much!

Oracle Database 11.2.0.3.0 is certified on Microsoft Windows (32-bit) 2008.
Error: ORA 12152
Text: TNS:unable to send break message
Cause: Unable to send break message. Connection probably disconnected.
Action: Re-establish connection. If the error is persistent, turn
n tracing and reexecute the operation.
Refer to MOS
ORA-12152 "Unable To Send Break Message" on Connection [ID 363638.1]

Printing from OSX Lion Client to Windows Server 2008

I have tried these methods:
=============
via System Preferences
IP Printer (Line Printer Daemon - LPD)
Address (both Server Name and IP Address)
e.g. lpd://servername/queue
Queue
Print Using (HP LaserJet P4010 Series)
Result:
After a test print is sent, the print queue dialog reads:
Processing Job.
Copying Print Data.
Connecting to Printer.
Paused - "/usr/libexec/cups/backend/lpd failed"
**** I have also tried using the hostname in place of the IP address
I get something to the effect of:
D [10/Nov/2011:12:24:35 -0500] [Job 27] ------------------------------------------------------
D [10/Nov/2011:12:24:35 -0500] [Job 27] Pre-processing tasks:
D [10/Nov/2011:12:24:35 -0500] [Job 27] Line - %%BeginDocument     Processor - EmbeddedDocumentCounter     "Check for embedded document"     (pre, mandatory, substr)
D [10/Nov/2011:12:24:35 -0500] [Job 27] Line - %!PS-Adobe     Processor - EmbeddedDocumentCounter     "Check for embedded document"     (pre, mandatory, substr)
D [10/Nov/2011:12:24:35 -0500] [Job 27] Post-processing tasks:
D [10/Nov/2011:12:24:35 -0500] [Job 27] Line - %%Page:     Processor - PageAccounting     "Log page for accounting"     (post, mandatory, substr)
D [10/Nov/2011:12:24:35 -0500] [Job 27] ------------------------------------------------------
D [10/Nov/2011:12:24:35 -0500] [Job 27] Read 8170 bytes of print data...
D [10/Nov/2011:12:24:35 -0500] [Job 27] Wrote 8170 bytes of print data...
D [10/Nov/2011:12:24:35 -0500] [Job 27] Connecting to 10.157.32.92:515 for printer DOBL_24HR1
D [10/Nov/2011:12:24:35 -0500] [Job 27] Connecting to printer.
D [10/Nov/2011:12:24:35 -0500] [Job 27] Set job-printer-state-message to "Connecting to printer.", current level=INFO
D [10/Nov/2011:12:24:35 -0500] [Job 27] STATE: -connecting-to-device
D [10/Nov/2011:12:24:35 -0500] [Job 27] Connected to printer.
D [10/Nov/2011:12:24:35 -0500] [Job 27] Set job-printer-state-message to "Connected to printer.", current level=INFO
D [10/Nov/2011:12:24:35 -0500] [Job 27] Connected to 10.157.32.92:515 (local port 1009)...
D [10/Nov/2011:12:24:35 -0500] [Job 27] lpd_command 02 DOBL_24HR1
D [10/Nov/2011:12:24:35 -0500] [Job 27] Sending command string (12 bytes)...
D [10/Nov/2011:12:24:35 -0500] [Job 27] Reading command status...
D [10/Nov/2011:12:24:35 -0500] [Job 27] lpd_command returning 1
D [10/Nov/2011:12:24:35 -0500] [Job 27] Backend returned status 1 (failed)
D [10/Nov/2011:12:24:35 -0500] [Job 27] Printer stopped due to backend errors; please consult the error_log file for details.
D [10/Nov/2011:12:24:35 -0500] [Job 27] End of messages
D [10/Nov/2011:12:24:35 -0500] [Job 27] printer-state=5(stopped)
D [10/Nov/2011:12:24:35 -0500] [Job 27] printer-state-message="/usr/libexec/cups/backend/lpd failed"
D [10/Nov/2011:12:24:35 -0500] [Job 27] printer-state-reasons=paused
=============
via System PreferencesWindows *navigated to the server (e.g. smb://servername/printer/) with the browser.
Result:
After a test print is sent, i login to the dialog box with:
DOMAIN\USERNAME
PASSWORD
(*) Remember this password in my keychain
Status - On Hold (Authentication Required)
**** I have also tried various formats for the username here:
DOMAIN\USERNAME & password
USERNAME & password
SERVER\USERNAME & password
Here's the Log output:
D [10/Nov/2011:12:26:21 -0500] [Job 28] Queued on "DOBL_24HR1" by "lab".
D [10/Nov/2011:12:26:21 -0500] [Job 28] job-sheets=none,none
D [10/Nov/2011:12:26:21 -0500] [Job 28] argv[0]="DOBL_24HR1"
D [10/Nov/2011:12:26:21 -0500] [Job 28] argv[1]="28"
D [10/Nov/2011:12:26:21 -0500] [Job 28] argv[2]="lab"
D [10/Nov/2011:12:26:21 -0500] [Job 28] argv[3]="testprint"
D [10/Nov/2011:12:26:21 -0500] [Job 28] argv[4]="1"
D [10/Nov/2011:12:26:21 -0500] [Job 28] argv[5]="AP_ColorMatchingMode=AP_ApplicationColorMatching AP_D_InputSlot= collate com.apple.print.DocumentTicket.PMSpoolFormat=application/pdf com.apple.print.JobInfo.PMJobName=testprint com.apple.print.PrinterInfo.PMColorDeviceID..n.=3671 com.apple.print.PrintSettings.PMColorMatchingMode..n.=0 com.apple.print.PrintSettings.PMColorSyncProfileID..n.=1580 com.apple.print.PrintSettings.PMCopies..n.=1 com.apple.print.PrintSettings.PMCopyCollate..b. com.apple.print.PrintSettings.PMFirstPage..n.=1 com.apple.print.PrintSettings.PMLastPage..n.=2147483647 com.apple.print.PrintSettings.PMPageRange..a.0..n.=1 com.apple.print.PrintSettings.PMPageRange..a.1..n.=2147483647 fit-to-page media=Letter pserrorhandler-requested=standard job-uuid=urn:uuid:ad3091e2-399a-3964-4c78-b8a81bf25bdf job-originating-host-name=localhost time-at-creation=1320945980 time-at-processing=1320945980 PageSize=Letter"
D [10/Nov/2011:12:26:21 -0500] [Job 28] argv[6]="/private/var/spool/cups/d00028-001"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[0]="<CFProcessPath>"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[1]="CUPS_CACHEDIR=/private/var/spool/cups/cache"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[2]="CUPS_DATADIR=/usr/share/cups"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[3]="CUPS_DOCROOT=/usr/share/doc/cups"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[4]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[5]="CUPS_REQUESTROOT=/private/var/spool/cups"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[6]="CUPS_SERVERBIN=/usr/libexec/cups"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[7]="CUPS_SERVERROOT=/private/etc/cups"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[8]="CUPS_STATEDIR=/private/etc/cups"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[9]="HOME=/private/var/spool/cups/tmp"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[10]="PATH=/usr/libexec/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[11]="[email protected]"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[12]="SOFTWARE=CUPS/1.5.0"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[13]="TMPDIR=/private/var/spool/cups/tmp"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[14]="USER=root"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[15]="CUPS_SERVER=/private/var/run/cupsd"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[17]="IPP_PORT=631"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[18]="CHARSET=utf-8"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[19]="LANG=en_US.UTF-8"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[20]="APPLE_LANGUAGE=en-US"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[21]="PPD=/private/etc/cups/ppd/DOBL_24HR1.ppd"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[22]="RIP_MAX_CACHE=128m"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[23]="CONTENT_TYPE=application/vnd.cups-banner"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[24]="DEVICE_URI=smb://utlab-prsrv-02/DOBL_24HR1"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[25]="PRINTER_INFO=DOBL_24HR1"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[26]="PRINTER_LOCATION="
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[27]="PRINTER=DOBL_24HR1"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[28]="PRINTER_STATE_REASONS=none"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[29]="CUPS_FILETYPE=document"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[30]="FINAL_CONTENT_TYPE=printer/DOBL_24HR1"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[31]="AUTH_I****"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[32]="AUTH_U****"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[33]="AUTH_P****"
D [10/Nov/2011:12:26:21 -0500] [Job 28] Started filter /usr/libexec/cups/filter/cgbannertopdf (PID 7646)
D [10/Nov/2011:12:26:21 -0500] [Job 28] Started filter /usr/libexec/cups/filter/cgpdftops (PID 7647)
D [10/Nov/2011:12:26:21 -0500] [Job 28] Started filter /usr/libexec/cups/filter/pstops (PID 7648)
D [10/Nov/2011:12:26:21 -0500] [Job 28] Started filter /Library/Printers/hp/filter/hpPostProcessing.bundle/Contents/MacOS/hpPostProces sing (PID 7649)
D [10/Nov/2011:12:26:21 -0500] [Job 28] Started backend /usr/libexec/cups/backend/smb (PID 7650)
D [10/Nov/2011:12:26:21 -0500] [Job 28] Started smb backend (PID 7653)
D [10/Nov/2011:12:26:21 -0500] [Job 28] STATE: +connecting-to-device
D [10/Nov/2011:12:26:21 -0500] [Job 28] Connecting to printer...
D [10/Nov/2011:12:26:21 -0500] [Job 28] Set job-printer-state-message to "Connecting to printer...", current level=INFO
D [10/Nov/2011:12:26:21 -0500] [Job 28] Looking up "utlab-prsrv-02"...
D [10/Nov/2011:12:26:21 -0500] [Job 28] Failed to connect to "smb://<username>:<password>@utlab-prsrv-02/": STATUS_LOGON_FAILURE
D [10/Nov/2011:12:26:21 -0500] [Job 28] Set job-printer-state-message to "Authentication required", current level=ERROR
D [10/Nov/2011:12:26:21 -0500] [Job 28] smb backend (PID=7653) stopped with status 512
D [10/Nov/2011:12:26:21 -0500] [Job 28] smb backend will exit with status 2
D [10/Nov/2011:12:26:21 -0500] [Job 28] load_banner(filename="/private/var/spool/cups/d00028-001")
D [10/Nov/2011:12:26:21 -0500] [Job 28] hpPostProcessing launched
D [10/Nov/2011:12:26:21 -0500] [Job 28] Page = 612x792; 12,12 to 600,780
D [10/Nov/2011:12:26:21 -0500] [Job 28] cgpdftops - copying to temp print file "/private/var/spool/cups/tmp/01ddf4ecb23b2"
D [10/Nov/2011:12:26:21 -0500] [Job 28] Final document orientation - 0
D [10/Nov/2011:12:26:21 -0500] [Job 28] Setting language to en-US
D [10/Nov/2011:12:26:21 -0500] [Job 28] EWU support is absent for device.
D [10/Nov/2011:12:26:21 -0500] [Job 28] Pages per sheet - 1
D [10/Nov/2011:12:26:21 -0500] [Job 28] Orientation - portrait
D [10/Nov/2011:12:26:21 -0500] [Job 28] ------------------------------------------------------
D [10/Nov/2011:12:26:21 -0500] [Job 28] Pre-processing tasks:
D [10/Nov/2011:12:26:21 -0500] [Job 28] Line - %%BeginDocument     Processor - EmbeddedDocumentCounter     "Check for embedded document"     (pre, mandatory, substr)
D [10/Nov/2011:12:26:21 -0500] [Job 28] Line - %!PS-Adobe     Processor - EmbeddedDocumentCounter     "Check for embedded document"     (pre, mandatory, substr)
D [10/Nov/2011:12:26:21 -0500] [Job 28] Line - %%EndComments     Processor - DriverVersion     "Insert driver info"     (pre, mandatory, substr)
D [10/Nov/2011:12:26:21 -0500] [Job 28] Post-processing tasks:
D [10/Nov/2011:12:26:21 -0500] [Job 28] Line - %%Page:     Processor - PageAccounting     "Log page for accounting"     (post, mandatory, substr)
D [10/Nov/2011:12:26:21 -0500] [Job 28] ------------------------------------------------------
D [10/Nov/2011:12:26:21 -0500] [Job 28] Allowing document iterator to handle job termination...
D [10/Nov/2011:12:26:21 -0500] [Job 28] Using line-by-line file iteration...
D [10/Nov/2011:12:26:21 -0500] [Job 28] cgpdftops - using PPD file "/private/etc/cups/ppd/DOBL_24HR1.ppd"...
D [10/Nov/2011:12:26:21 -0500] [Job 28] PS Matching Mode = AP_ApplicationColorMatching
D [10/Nov/2011:12:26:21 -0500] [Job 28] cgpdftops - languageLevel = 3, mediaBox.size.width = 612, mediaBox.size.height = 792
D [10/Nov/2011:12:26:21 -0500] [Job 28] cgpdftops - documentMediaBox.size.width = 612, documentMediaBox.size.height = 792
D [10/Nov/2011:12:26:21 -0500] [Job 28] Page = 612x792; 12,12 to 600,780
D [10/Nov/2011:12:26:21 -0500] [Job 28] slow_collate=0, slow_duplex=0, slow_order=0
D [10/Nov/2011:12:26:21 -0500] [Job 28] Before copy_comments - %!PS-Adobe-3.0
D [10/Nov/2011:12:26:21 -0500] [Job 28] %!PS-Adobe-3.0
D [10/Nov/2011:12:26:21 -0500] [Job 28] %APL_DSC_Encoding: UTF8
D [10/Nov/2011:12:26:21 -0500] [Job 28] %APLProducer: (Version 10.7.2 (Build 11C74) Quartz PS Context)
D [10/Nov/2011:12:26:21 -0500] [Job 28] %%Title: (testprint)
D [10/Nov/2011:12:26:21 -0500] [Job 28] %%Creator: (cgpdftops CUPS filter)
D [10/Nov/2011:12:26:21 -0500] [Job 28] %%CreationDate: (Thursday, November 10 2011 12:26:21 EST)
D [10/Nov/2011:12:26:21 -0500] [Job 28] %%For: (lab)
D [10/Nov/2011:12:26:21 -0500] [Job 28] %%DocumentData: Clean7Bit
D [10/Nov/2011:12:26:21 -0500] [Job 28] %%LanguageLevel: 3
D [10/Nov/2011:12:26:21 -0500] [Job 28] %%Pages: 1
D [10/Nov/2011:12:26:21 -0500] [Job 28] %%BoundingBox: (atend)
D [10/Nov/2011:12:26:21 -0500] [Job 28] %%PageOrder: Ascend
D [10/Nov/2011:12:26:21 -0500] [Job 28] %%EndComments
D [10/Nov/2011:12:26:21 -0500] [Job 28] Before copy_prolog - userdict/dscInfo 5 dict dup begin
D [10/Nov/2011:12:26:21 -0500] [Job 28] Before copy_setup - %%BeginSetup
D [10/Nov/2011:12:26:21 -0500] [Job 28] Before page loop - %%Page: 1 1
D [10/Nov/2011:12:26:21 -0500] [Job 28] Copying page 1...
D [10/Nov/2011:12:26:21 -0500] [Job 28] pagew = 588.0, pagel = 768.0
D [10/Nov/2011:12:26:21 -0500] [Job 28] bboxx = 0, bboxy = 0, bboxw = 612, bboxl = 792
D [10/Nov/2011:12:26:21 -0500] [Job 28] PageLeft = 12.0, PageRight = 600.0
D [10/Nov/2011:12:26:21 -0500] [Job 28] PageTop = 780.0, PageBottom = 12.0
D [10/Nov/2011:12:26:21 -0500] [Job 28] PageWidth = 612.0, PageLength = 792.0
D [10/Nov/2011:12:26:21 -0500] [Job 28] Calling processor EmbeddedDocumentCounter before line %!PS-Adobe-3.0
D [10/Nov/2011:12:26:21 -0500] [Job 28] Calling processor DriverVersion before line %%EndComments
D [10/Nov/2011:12:26:21 -0500] [Job 28] Task "Insert driver info" complete. Processor - DriverVersion. Line - %%EndComments
D [10/Nov/2011:12:26:21 -0500] [Job 28] Received SIGPIPE
D [10/Nov/2011:12:26:21 -0500] [Job 28] Wrote 1 pages...
D [10/Nov/2011:12:26:21 -0500] [Job 28] Backend returned status 2 (authentication required)
D [10/Nov/2011:12:26:21 -0500] [Job 28] Job held for authentication.
D [10/Nov/2011:12:26:21 -0500] [Job 28] End of messages
D [10/Nov/2011:12:26:21 -0500] [Job 28] printer-state=3(idle)
D [10/Nov/2011:12:26:21 -0500] [Job 28] printer-state-message="Authentication required"
D [10/Nov/2011:12:26:21 -0500] [Job 28] printer-state-reasons=none
==============
via CUPS (localhost:631)here is the syntax of my printer addresses:
SAMBA--
smb://username:password@serverhost/printer
smb://username:password@serverip/printer
smb://serverhost/printer
smb://serverip/printer
I get something like...
"/usr/libexec/cups/backend/smb failed"
D [10/Nov/2011:12:39:00 -0500] [Job 29] Before copy_comments - %!PS-Adobe-3.0
D [10/Nov/2011:12:39:00 -0500] [Job 29] %!PS-Adobe-3.0
D [10/Nov/2011:12:39:00 -0500] [Job 29] %APL_DSC_Encoding: UTF8
D [10/Nov/2011:12:39:00 -0500] [Job 29] %APLProducer: (Version 10.7.2 (Build 11C74) Quartz PS Context)
D [10/Nov/2011:12:39:00 -0500] [Job 29] %%Title: (testprint)
D [10/Nov/2011:12:39:00 -0500] [Job 29] %%Creator: (cgpdftops CUPS filter)
D [10/Nov/2011:12:39:00 -0500] [Job 29] %%CreationDate: (Thursday, November 10 2011 12:39:00 EST)
D [10/Nov/2011:12:39:00 -0500] [Job 29] %%For: (lab)
D [10/Nov/2011:12:39:00 -0500] [Job 29] %%DocumentData: Clean7Bit
D [10/Nov/2011:12:39:00 -0500] [Job 29] %%LanguageLevel: 3
D [10/Nov/2011:12:39:00 -0500] [Job 29] %%Pages: 1
D [10/Nov/2011:12:39:00 -0500] [Job 29] %%BoundingBox: (atend)
D [10/Nov/2011:12:39:00 -0500] [Job 29] %%PageOrder: Ascend
D [10/Nov/2011:12:39:00 -0500] [Job 29] %%EndComments
D [10/Nov/2011:12:39:00 -0500] [Job 29] Before copy_prolog - userdict/dscInfo 5 dict dup begin
D [10/Nov/2011:12:39:00 -0500] [Job 29] Before copy_setup - %%BeginSetup
D [10/Nov/2011:12:39:00 -0500] [Job 29] Before page loop - %%Page: 1 1
D [10/Nov/2011:12:39:00 -0500] [Job 29] Copying page 1...
D [10/Nov/2011:12:39:00 -0500] [Job 29] pagew = 588.0, pagel = 768.0
D [10/Nov/2011:12:39:00 -0500] [Job 29] bboxx = 0, bboxy = 0, bboxw = 612, bboxl = 792
D [10/Nov/2011:12:39:00 -0500] [Job 29] PageLeft = 12.0, PageRight = 600.0
D [10/Nov/2011:12:39:00 -0500] [Job 29] PageTop = 780.0, PageBottom = 12.0
D [10/Nov/2011:12:39:00 -0500] [Job 29] PageWidth = 612.0, PageLength = 792.0
D [10/Nov/2011:12:39:00 -0500] [Job 29] Calling processor EmbeddedDocumentCounter before line %!PS-Adobe-3.0
D [10/Nov/2011:12:39:00 -0500] [Job 29] Calling processor DriverVersion before line %%EndComments
D [10/Nov/2011:12:39:00 -0500] [Job 29] Task "Insert driver info" complete. Processor - DriverVersion. Line - %%EndComments
D [10/Nov/2011:12:39:00 -0500] [Job 29] Current page number is 0
D [10/Nov/2011:12:39:00 -0500] [Job 29] Calling processor PageAccounting after line %%Page: 1 1
D [10/Nov/2011:12:39:00 -0500] [Job 29] PAGE: 1 1
D [10/Nov/2011:12:39:00 -0500] [Job 29] Failed to connect to "smb://<username>:<password>@utlab-prsrv-02/": STATUS_LOGON_FAILURE
D [10/Nov/2011:12:39:00 -0500] [Job 29] ATTR: auth-info-required=username,password
D [10/Nov/2011:12:39:00 -0500] [Job 29] smb backend (PID=8517) stopped with status 512
D [10/Nov/2011:12:39:00 -0500] [Job 29] smb backend will exit with status 2
D [10/Nov/2011:12:39:00 -0500] [Job 29] Received SIGPIPE
D [10/Nov/2011:12:39:00 -0500] [Job 29] Wrote 1 pages...
D [10/Nov/2011:12:39:00 -0500] [Job 29] Backend returned status 2 (authentication required)
D [10/Nov/2011:12:39:00 -0500] [Job 29] Job held for authentication.
D [10/Nov/2011:12:39:00 -0500] [Job 29] End of messages
D [10/Nov/2011:12:39:00 -0500] [Job 29] printer-state=3(idle)
D [10/Nov/2011:12:39:00 -0500] [Job 29] printer-state-message="Authentication required"
D [10/Nov/2011:12:39:00 -0500] [Job 29] printer-state-reasons=none
=================
So yeah...
I'm totally stumped now.
I feel like I've tried every method imaginable, but still no luck.
Printing from OSX 10.6.8 works just FINE.
On the server side, I'm running Windows Server 2008... there's only a local admin and a local user account.
Clients running OSX Lion 10.7.2 -- All updated.
Printer is an HP LaserJet P4010-4510 series.
Workstation is an iMac 21.5-inch, Late 2009
3.06 Ghz Intel Core 2 Duo
Please help!!!
--- Richard

LPD print service is not enabled by default in Server 2008. It can be enabled via the Print Serveer role, but I am remote and cannot confirm the exact setting.
As for SMB, the error log is showing;
Failed to connect to "smb://<username>:<password>@utlab-prsrv-02/"
So it would suggest that there is still an issue with the account detail you are using as you show you have tried this syntax at one stage. If you want to continue to create the queue using SMB rather than LPD then I recommend using the CUPS web page (http://127.0.01:631) to create the queue. This will allow you to enter the syntax exactly as the error message shows. From previous testing I found it was okay to just use the account name rather than domain/account name on a domain bound server.

Installing forms 11gr2 services on windows server 2008 r2 64 bit

hello,
I successfully installed on windows 7 64 bit my developer forms & reports 11gR2 with weblogic 10.3.5 , jdk 1.6.0_+.
Now i want to install in it in windows server 2008 R2 64bit, to deploy the application i created as a test.
Question.
1. Can I used the same installation set up , step, procedure as the development mode by only changing the installation mode to production mode in windows 2008R2?
1.1 Do I need to create domain first after install the weblogic or it is like the development mode that the FRM_installation will create its classic domain?
2. Can I used it without the fusion middleware?
3. It is compatible version for forms 11gr2 for Oracle Fusion Middleware 11g Release 1 (11.1.1.6.0) ? << doubted not compatible.
4. It is valid if i only install weblogic server 10.3.5 without the fusion middleware? Am I or other clients can able to access it?
5. It is will be a AS server even if without the repository creation?
Note : i only need the forms&report server services to run our application on windows server 2008 R2 64 bit and compile respectedly.
I ve done it with OAS 10g before but different procedures now since forms 11gr2 is using now weblogic server.
Thank you very much.

... i want to install in it ... , to deploy the application i created as a test If you chose the "Development" install option during the installation of 11.1.2 you would have everything you needed to run your form. The only significant difference between the Dev and Deploy installation is the that in the Dev install type the Forms and Reports Servlets are deployed into the Admin server Managed server rather than creating a unique one for each. For local testing purposes, this should be sufficient for most cases. If on the other hand you need a full installation (Deployment), I would recommend that you choose this option, but be sure to also include the Builders. The Builders are available for both install types. I would not recommend attempting to have both install types installed together although it likely can be done. Having both installed would likely create confusion and difficulty during troubleshooting.
Important point. If you choose the Deployment option and include the Builders during that installation, you do not need to start everything in order to run a form. All that is needed is WLS_FORMS. All other processes can be stopped if system resources is a concern. For an actual production deployment, it is recommended that you route end-user requests through HTTP Server, but this is not required unless you plan to use SSO or other feature that is managed through HTTP Server.

SAPRouter on Windows Server 2008 R2 / Service definition

Hi,
I installed SAPRouter on a Windows Server 2008 R2 and i have troubles registering saprouter as a service...
The installation directory is: C:\usr\sap\saprouter. There are these files:
niping.exe
sapcar.exe
ntscmgr.exesaprouter.exe
I am able to start the router from the command line.
trc file: "dev_rout", trc level: 1, release: "710"
Tue Feb 08 13:38:43 2011
SAP Network Interface Router, Version 39.3 (SP4)
command line arg 0:     saprouter
command line arg 1:     -r
command line arg 2:     -R
command line arg 3:     c:\Windows\System32\saprouttab.txt
main: pid = 1748, ppid = 0, port = 3299, parent port = 0 (0 = parent is not a saprouter)
reading routtab: 'c:\Windows\System32\saprouttab.txt'
When i try to register (with Domain admin user) the service, the system means that:
C:\usr\sap\saprouter>ntscmgr install SAProuter -b C:\usr\sap\saprouter\saprouter
.exe -p "service -r -R C:\Windows\System32\saprouttab.txt"
CreateService SUCCESS
After that i am editing the service and entering a different user "sapadm" with local user rights. When i want to start the service terminates with Error 2 The system cannot find the file specified
when i check the the service' properties, the path to executable is empty...
Can anyone help me?
Thanks,
Martin

Hi,
If you don't want to run the service then just stop the service from services file.
For successful service creation, you need to follow all steps from the note which i suggested you earlier.
Thanks
Sunny

Windows Server 2008 R2 Profile Creation

Similar Messages

Maybe you are looking for