Windows Server 2008 R2 Windows Server Backup error 'Volumes larger than 2088958 megabytes cannot be protected'

Backing up 41.4 GB on 930 GB internal drive to a NAS with 5.1 MB used on 929 GB drive.

Hi,
Please try to backup a small file the NAS to see if the issue still exist. In the meantime, try to see if you can backup the 41.4 GB on 930 GB internal drive to a local position.
You could refer to the link below to see if the sector size of the NAS is larger than 512B that could cause the issue.
Windows backup “Volumes larger than” error
http://superuser.com/questions/446449/windows-backup-volumes-larger-than-error
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Windows 7 or Windows Server 2008 R2 domain join displays error "Changing the Primary Domain DNS name of this computer to "" failed...."

Hi,
Windows 7 or Windows Server 2008 R2 domain join displays error "Changing the Primary Domain DNS name of this computer to "" failed...."
DC:windows Server 2008 R2
Domain functional level:Windows Server 2003
When Winxp join domain, have no this error message.
I checked http://support.microsoft.com/kb/2018583?wa=wsignin1.0 does't work.
There have 3 suggestion in this article:
1.The "Disable NetBIOS over TCP/IP" checkbox has been disabled in the IPv4 properties of the computer being joined.
Doesnt's work.
2.Connectivity over UDP port 137 is blocked between client and the helper DC servicing the join operation in the target domain.
On my DC, I run netstat -an, reslut as below:
UDP 192.168.20.3:137 *:*
3.The TCP/IPv4 protocol has been disabled so that the client being joined or the DC in the destination domain targeted by the LDAP BIND is running TCP/IPv6 only.
We are not using IPV6.
This server recently updated from Windows Server 2003 to Windows Server 2008 R2. Before upgrade, when Win7 and Win2008 join this domain, also have the same error message.
Please help to check this issue.
Thank you very much.
BR
Guo YingHui

Hi Guo Ying,
I have faced this critical error which makes over-writes the host names in the domain when you join.
For example: Already you had a host name called as PC.domain.com in the domain.com Domain.
When you try to add the another host name called as PC in the domain.com Domain, it doesn't give you the duplicate name error on the network it does over-write the existing host name called as PC.domain.com & it will add the new host name into the domain.
Host name which got over-written will get removed from the domain. I faced this issue in my project. My DPM host name got removed from the Domain & new host name got joined into the domain which halted my backups for one day.
Final Resolution is as follows:
You need to start the dns console on the DC & drop down the domain name.
Select the _msdcs when you click on _msdcs it will show the Name Server's list on the right hand side.
You need to add the Domain Naming Master under the _msdcs or add all the domain controllers which you had.
After you add the Name server's try joining the PC OR Laptop to the domain which is successfully joins it.
Regards
Anand S
Thanks & Regards Anand Sunka MCSA+CCNA+MCTS

Windows Server 2008 R2 System State Backup fails "the parameter is incorrect"

Hi,
I'm having the same problem as I've found in a few other threads.
http://social.technet.microsoft.com/forums/en-us/windowsbackup/thread/C633B2E6-1161-4146-BC09-C2712231F0EE
and
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/0b0f2d9c-e3b1-4f85-a6d2-2e15e5a15bc1
I've tried running the vshadow.exe -wm2 > out.txt command and searching the output for invalid paths, but I can't seem to find any paths that looks incorrect.
I've also done a registry search under HKLM\CurrentControlSet\Services for the / character and didn't come up with any in any paths either.
The server is a pretty new install. DC, DNS, DHCP, File and Print services. It has been running in production for about a week for a small business. Their previous server desperately needed changing over, so it got pushed in fairly quick. I never assumed
I would have had trouble with the system state backing up!. It would be nice to get it working so I can sleep at night :). The old DC is still running, so all is not lost in a failure, but still... I guess also once I've demoted the old DC, I can restore AD
just by restoring the entire system image (Don't have to worry about USN sync if only single DC), but I would still like a system state backup.
Thanks, Ryan

Hi,
Try to apply the following hotfix.
System state backup error in Windows Server 2008, in Windows Vista, in Windows 7 and in Windows Server 2008 R2: "Enumeration of the files failed"
http://support.microsoft.com/kb/980794
You may have to restart the computer after you apply this hotfix.
Jeff Ren TechNet Community Support beneficial to other community members reading the thread.

Windows Search Service failing to install on Windows Server 2008 R2 Terminal Server

Hi,
I am unable to install the Windows Search Service on a Server 2008 R2 Terminal Server. I want to install this to enable indexing options within Outlook 2013 for all users.
Server Manager > Add Roles > File Services > Select only Windows Search Service > Install.
The error I receive: "Attempt to configure Windows Search Service failed with error code 0x80070057. The parameter is incorrect."
Thanks,
Bjorn

Hi,
I did the test and could install the Windows Search Service without problem.
Which role did you installed on the terminal server?
Did you try to install it on another windows server?
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Windows Server 2012 RDS CALS on Windows Server 2008 R2 Licensing Server

Hi,
at the moment we are installing the first couple of Windows Server 2012 in our infrastructure.
Some of them have installed RDS.
Now we are wondering whether it is possible to use our existing Windows Server 2008 R2 licensing server for serving the licenses we have (yes we to have new Windows Server 2012 RDS CALS) or whether we have to install a new host based on Windows Server 2012.
We tried to add the new license to the 2008 R2 licensing server, but it is not possible. The licensing manager's error message: "The license code contains invalid characters or not enough characters."
Is there any other way?
Thanks and regards
Matthias

Hi matt_will_fix_it,
How about Windows 2012 R2 ?
Will a Windows 2012 RD Licensing server provide licences to a Windows 2012 R2 server?
I have not tested it, but it should work. Server 2012 R2 requires the same RDS CAL version as Server 2012. If you try it and have an issue please reply back.
-TP

Navigation Issue on HC 91, Tools 8.51, SQL Server 2008 on Windows 2008

Hi Guys,
I installed HCM 91 -Tools 851-SQL Server 2008 on Windows 2008 server. App server running perfectly, initiated web server fine.
When I login in n-tier/web via PS userid, navigation to Panels are fine but when I try to click on any page, it gives error IE exception at the bottom – “Error on the page”, page does nothing, no searches and does not display the page.
I tried installation from ground zero the 3rd time last night, followed all the steps and stuck at this point.
I am wondering if anyone has encountered these issues.
I appreciate any pointers.
Thanks in advance.
Cheers
-Vinay

Same question, same answer :
http://peoplesoft.ittoolbox.com/groups/technical-functional/peopletools-l/navigation-issue-on-hc-91-tools-851-sql-server-2008-on-windows-2008-server-3837147
Nicolas.

IDM 7.2 under Windows Server 2008 R2 (SQL Server ): Which NTW ? Which JVM ?

Hello,
We are installing IDM 7.2 under Windows Server 2008 R2 using the database SQL Server 2008 R2.
1/ Which NetWeaver should we use to install the Java Application Server (NTW 7.3 or NTW 7.2)?
Using install guides 7.2rev8, we tried NTW 7.3 but it comes with JVM 1.6 that isn't supported, according to the PAM.
Should we install the AS Java with NTW 7.2 that comes with JVM 1.5 (JVM 1.5 being supported)?
2/ Has someone installed IDM 7.2 under Windows Server 2008 R2 (SQL Server)?
If yes, which NTW was used (7.2 or 7.3)? Which JVM was used (1.5 or 1.6)? Which JDBC drivers (1.2 or 3)?
Thanks a lot for your replies,
Regards.

{quote)For the Java RE are you using 32 or 64 bytes ?{quote)
C:\Users\Administrator>java -version
java version "1.6.0_30"
Java(TM) SE Runtime Environment (build 1.6.0_30-b12)
Java HotSpot(TM) 64-Bit Server VM (build 20.5-b03, mixed mode)
{quote)Which JDBC driver do you use (1.2 or 3.0) ?{quote)
{quote)In the IDM Identity Center, for the dispatchers option tools, how do you fill it ?
We are using :
Path to java exe: E:\usr\sap\ID1\J00\exe\sapjvm_6\bin\java.exe{quote)
C:\Program Files\Java\jre6\bin\java.exe
{quote)Path to jvm.dll: E:\usr\sap\ID1\J00\j2ee\JSPM\sapjvm\jre\bin\server\jvm.dll{quote)
C:\Program Files\Java\jre6\bin\server\jvm.dll
{quote)JDBC driver jar: D:\Microsoft SQL Server JDBC Driver 3.0\sqljdbc_3.0\enu\sqljdbc4.jar{quote)
C:\sqljdbc\sqljdbc4.jar
{quote)JDBC driver names: xxxxxxxxx (can you write us what you use){quote)
com.microsoft.sqlserver.jdbc.SQLServerDriver
{quote)CLASSPATH extension: D:\Microsoft SQL Server JDBC Driver 3.0\sqljdbc_3.0\enu\sqljdbc4.jar{quote)
No Classpath specified

Testing moving to new Windows Server 2008 R2 DHCP Server.

HI all,
I want to bring up a new DCHP server on an existing Windows Server 2008 R2 Domain Controller. The current DHCP server is a Windows 2003 Domain Controller. I have moved all the FSMO Roles to the new 2008 R2 domain controller
with the plan to eventually demote the 2003 server and take it off the network. I have the dhcp role installed on the new Windows Server 2008 R2 and have duplicated the exact settings (reservations, scope, etc.) from the old windows 2003 server
on the new 2008 R2 server. My plan was simply to disable the dhcp service on the old windows server 2003 and then authorize the new Windows Server 2008 R2 DHCP Server. However, after reading several articles, I understand that once you authorize
a new dhcp server, the old dhcp sever is unauthorized. I also read where several people had major issues with the new dhcp server not handing out IP Addresses even though the new dhcp server was authorized successfully. Since this is
a production network, I would like to employ the correct method to bring up the new dhcp server. Also, if there is a problem, is there an easy way to go back to the original dhcp server? Thanks for your help.
FD
Bob Andres

You can authorize multiple DHCP servers on a network.
You can activate and deactivate different scopes independently. So you can test DHCP functionality with a test scope.
Also, you can stop the old server in many ways that allow it to be online very rapidly: stop the dhcp server service, deactivate the scopes and yes even de-authorize the server.
My advice would be to built a test so you are confident (=very important) and not to fear the final onlining too much. DHCP is no rockets science. If you've replicated the configuration and are aware of possible IP Helper configurations on your routers/switches,
it should all work out fine.
MCP/MCSA/MCTS/MCITP

Windows Server 2008 and SQL Server 2008 R2 - ?? for replication with Oracle

Hello:
I am running Windows Server 2008 and SQL Server 2008 R2 - 64 bit
I need to replicate data between the SQL 2008 and Oracle 11.2 ?? with Oracle being the publisher
I also would lile SqlPlus installed on the server.
I need a definite answer as to what I should download from the Oracle download area. There are just so many packages and so many version I dont know what to download.
Thanks

Hi,
Currently Microsoft Windows Server 2008 and SQL Server 2008 are not supported for SAP Business One.
For detailed information about all supported platforms, we have the following link for your reference:
www.service.sap.com/smb/sbo >product availability > supported platforms.
Regarding the information on the service marketplace this is updated on a regular basis and provides the most up to date information regarding the supported platforms for Business One.
Platforms not mentioned in this documentation are not supported.
hope it helps,
Regards,
Ladislav
SAP Business One Forum Team

Windows Server 2008, IIS7, SQL Server 2005 - Will this work?

Hi,
Not super concerned about it being supported at this point, BUT, can I run/install CR XI SP2 on Windows Server 2008, IIS7, SQL Server 2005?
I've reference the System Requirement stuff and it was written before Server 2008 was released.
If it's possible, any help on what to install/not install would be great appreciated.
Thanks,
Mike

Try it. If it works great. As you are using ASP, your app must be using craxdrt.dll. This dll has been retired and no longer ships with CR 2008, so even when the next SP for CR 2008 releases, it will be of no use to you. If the ASP app does not work on the server, you may want to post your query to the Legacy Application Development SDKs forum:
SAP Crystal Reports - Legacy SDKs
and see if anyone can help.
Other than that, the only option will be to go to .NET once SP 1 releases for CR 2008, or use CR 10.5 which bundles with .NET 2008.
Ludek

Server 2008 with SQL server 2003 installation problem in SAP 8.8 in clint

Hello Sir
I want to install clint for SAP B1 8.8 and we have windows server 2008 with sql server 2005
when i install the clint i got one error in DI API installation that licence server name and port number is not available.
Please tell me the complete process to install 8.8. clint with which supporting software i have to install in clint machine.
and what things i have to check in server for installation .
Please kindly reply ASAP.
Thanks
Vaibhav Kothari

Hi,
every question / issue you should know, is descripted in the following manual, please read it and follow the installation instruction manual:
https://websmp201.sap-ag.de/~sapidb/011000358700000150922010E.zip
Regards Steffen

Server 2008 R2 parent & server 2012 R2 Additional

Hi Dears
Following is the infrastructure of my network
DC+DNS + DHCP - Server 2008 R2
WSUS - Server 2008 R2
WDS - Server 2008 R2
SCCM 2012 - Server 2008 R2
VPN - Server 2008 R2
Domain Functional Level 2008 R2
Recently I install server 2012 R2 as additional DC and then transfer FSMO and DNS and DHCP to it and disconnect 2008 Server from my network but I notice after that the WDS & VPN & SCCM not working good,
Any help would be much appreciated, thank you.

Hello,
to exclude DC-domain problems please UPLOAD:
ipconfig /all >c:\ipconfig.log [from each DC/DNS Server]
dcdiag /v /c /d /e /s:dcname >c:\dcdiag.log
repadmin /showrepl dc* /verbose /all /intersite >c:\repl.log ["dc* is a place holder for the starting name of the DCs if they all begin the same (if more then one DC exists)]
dnslint /ad /s "DCipaddress" (http://support.microsoft.com/kb/321045)
ADREPLSTATUS
http://www.microsoft.com/en-us/download/details.aspx?id=30005 can also be exported to file.
As the output will become large, DON'T post them into the thread, please use Windows OneDrive (https://onedrive.live.com) [with open access!]
and add the link from it here. Also the /e in dcdiag scans the complete forest, so better run it on COB.
Have you assured that all domain machines use the new DNS server as preferred on the NIC settings?
Are there any other DNS servers configured on the machines NICs, ISPs one or your router?
What does "not working good" in detail mean? Please post error messages or event viewer errors related to this description.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

Server 2008 R2 RADIUS Server with a Cisco Aironet 1040 Wireless AP

I am trying to get Server 2008 R2 RADIUS Server to work with a Cisco Aironet 1040 Wireless AP. I have installed the RADIUS server by MS standards and performed some searches on Google to configure the Cisco Aironet. I see others using a Wireless LAN Controller, which I do not have. I found this post below:
https://supportforums.cisco.com/discussion/11546056/wlc-2504-radius-2008-r2-server
But I have yet to locate a good step by step document on how to set it up and I have found so many different ways that others have set it up, but none have yet to work. I am having authentication issues that I have know of and I do not see any errors in the Windows Event Viewer and I do not know where the Acess Point stores it logs for any sort of error. Keep in mind this is the first time I am doing this. I do not have a Wireless LAN Controller and all my network / domain services are on individually built servers and not on one single server as I have seen with most of the documentation they all say the same thing by putting the Certificate Services, Domain Services (AD / ADS, etc), and NPS. I do not want that configuration and my setup should not be any different, but something is not right. I know from reading that this is not rocket science, but from someone who has never done it before this is difficult as I keep reading on and so many people do it different ways including what I have been reading according to what Cisco says to configure in the environment. Does anyone know where I can find good step by step documentation along with where I can look for logs on either device? I find that all the documentation I see on Cisco's website and from searching that it is old and outdated and not been updated in a long time so it is hard to determine what works and what does not work. I am stumped here and have been doing this for several weeks now with no luck. Thank you in advance.

I did configure the Server 2008 R2 RADIUS Server using this video below:
https://www.youtube.com/watch?v=g-0MM_tK-Tk
I also referenced Technet to make sure it was configured correctly as well. I am still not sure if I am 100% setup correctly on the Windows Server side, but I for sure want to make sure I have the AP side setup correctly. Do you know of a better article for the Windows Server 2008 R2 setup? Does it matter that I do not have all the services installed on the same server? Instead I have them installed on multiple servers.
I have image number c1140-k9w7-tar.124.25d.JA1 on the AP. The part that confused me in that article, which I have seen before was the part about "Setting up access point must be configured in the authentication server as an AAA client." What is the AAA Client? I also am not aware of having Cisco Secure ACS anywhere built into the AP as that part through me off completely. Do I need to skip these steps? Thank you for help on this.

ADWS Broken after in-place upgrade from Server 2008 R2 to Server 2012 R2

I performed an in-place upgrade from 64-bit Server 2008 R2 to Server 2012 R2. This machine ran Active Directory Web Services. After the upgrade ADWS will not start. I get the following event log error:
Log Name:      Application
Source:        .NET Runtime
Date:          11/21/2014 3:23:02 PM
Event ID:      1026
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      COMPUTER
Description:
Application: Microsoft.ActiveDirectory.WebServices.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.ServiceModel.CommunicationObjectFaultedException
Stack:
   at System.ServiceModel.Channels.CommunicationObject.Close(System.TimeSpan)
   at Microsoft.ActiveDirectory.WebServices.WindowsHostService.StartService(System.Object)
   at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
   at System.Threading.ThreadHelper.ThreadStart(System.Object)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name=".NET Runtime" />
    <EventID Qualifiers="0">1026</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-11-21T20:23:02.000000000Z" />
    <EventRecordID>65596</EventRecordID>
    <Channel>Application</Channel>
    <Computer>COMPUTER</Computer>
    <Security />
</System>
<EventData>
    <Data>Application: Microsoft.ActiveDirectory.WebServices.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.ServiceModel.CommunicationObjectFaultedException
Stack:
   at System.ServiceModel.Channels.CommunicationObject.Close(System.TimeSpan)
   at Microsoft.ActiveDirectory.WebServices.WindowsHostService.StartService(System.Object)
   at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
   at System.Threading.ThreadHelper.ThreadStart(System.Object)
</Data>
</EventData>
</Event>

I compared the registry with a working system but the Counters - and all other keys - looked fine.
At the same time as upgrading a DC a colleague was updating an unrelated server, and he started to see similar events in the event log (but for the Dell OpenManage Essentials service, not ADWS). The error was complaining about KERNELBASE.dll which set my
spider sense tingling. We knew that this server had Windows Updates pending. Fully updating it solved the problem on that server.
I solved the ADWS problem in the end by fully Windows Updating the DC. In particular, the ADWS Service started successfully after installing KB2919355 and rebooting. That also
'unlocked' a further 59 updates pending.
After the in-place upgrade I always fully Windows Update but I'm 99% certain that KB2919355 did NOT show up when I did a Check for Updates straight after a reboot so I thought the DC was up-to-date. I then spent hours investigating the ADWS problem and rebooted
as part of the diagnostics. It was then that I noticed on the logon screen that there were updates pending...
Moral of the story? Windows Update, then Update again, and again, and again. The length of time it takes to Windows Update after an upgrade from 2008R2 to 2012R2 is painful though.

Printing issues when printing to Server 2008 R2 Print Server

We have a problem with netwok printing that encompasses many different areas and versions of Windows OSes so I will be posting this in a few different places.
Let me lay this out for you. We have a single Server 2008 R2 print server with 300 printers of various models. This print server has both 32 and 64-bit drivers installed for every printer. For the HP printers we are using the HP Universal Printing PCL 6
(version 61.94.3.37) and for the Ricoh printers we are using their PCL6 driver for universal printing version 3.5. All drivers run in Isolation mode and no printer gets published to AD.
We have a mix of Windows clients printing to these printers, both XP Pro and Windows 7 32 and 64-bit.
Now for the problems: The other day one Isolation host on the server went crazy, processing was hitting 100% and memory was fluctuating and growing a lot. After investigating a little that isolation host was having issues accessing the Ricoh Driver (which
was 3.4 at the time). In an attempt to resolve the issue we updated the driver to V. 3.5. This seemed to fix the isolation issues and things calmed down however this is the beginning of many other issues for the clients. Both Windows OS versions (XP and 7)
don't seem to be either downloading and installing the updated driver and/or doing so correctly. Clients are now experiencing extremely slow printing, applications such as Word, Outlook, Excel and others open slowly and it can take 2-3 minutes for print dialog
boxes to open. In all cases it seems that we have to have a tech delete the printer(s), delete the driver and then re-install the printer to make things better but for some reason, which is really unknown, this process doesn't work for every machine and on
some we can't even remove the old drivers at all without booting into SafeMode and doing it that way.
With all of that said, are there any suggestions as to why the clients aren't downloading and installing the drivers from the server correctly? How to avoid these issues when we need to upgrade the drivers on the server in the future? Most importantly right
now, are there any recommendations or scripts on how to force the deletions of the printer, driver, reset the print spoolers and then re-add the printers in a more automated fashion?
I have played with both wmic, pnputil and printuidll and am trying to put something together but without a set solution that will work consistently it becomes a lot more difficult.

We are experiencing a very similar issue.
Windows Server 2008 R2. Printers are deployed over group policy.
Clients range from Windows 7 to Windows 8. Citrix XenDesktop and XenApp environment also connects to these endpoints.
We have A wide assortment of HP printers, and Ricoh Printers.
For the ricoh's we have been historically using the PCL6 drivers for the individual device type (not universal print). Up till recently, it all was working fine, until about some time in the middle of june, when everything just seemed to go crazy.
The issue was resolved by moving off from the PCL 6 drivers and using the PCL5e driver counterparts on all of our ricoh printers.
It would crash XenDesktop applications, it would crash office applications.
The print spooler would lock up, even if the ricoh printers were not actually used, just as long as they were loaded.
Even after loading PCL5 on the servers, some of the clients would simply not download the PCL5 version of the driver from the print server. In order to resolve this, I have created the steps below. Be advised, this may possibly cause damage on your system.
We just found it worked great for us. Local printers will likely have to be manually reinstalled after this.
Directions
Stop the print spooler
Open C:\Windows\System32\Spool and delete the following
All files in SERVERS
All files in PRINTERS
All files in drivers
All files in prtprocs
Start the print spooler
Open a command prompt as administrator, and run the following command
Cscript C:\windows\system32\Printing_Admin_Scripts\en-US\prndrvr.vbs -x
This should further delete all print drivers.
Open a command prompt as a standard user (not administrator) and run the following
Gpupdate
Now wait. It takes a while, but the printers will slowly start to repopulate.
I am still not sure what is going on with the PCL6 drivers for ricoh, and why this issue is happening. I'm guessing it has something to do with the Ricoh auto update that is included in their pcl6 drivers. Maybe some sort of auto update happened recently.

Windows Server 2008 R2 Windows Server Backup error 'Volumes larger than 2088958 megabytes cannot be protected'

Similar Messages

Maybe you are looking for