Windows Server 2008 R2 - Won't load certain web pages

Users are unable to access certain websites from either of our RDP session servers (Windows Server 2008 R2 Standard with SP1).
1.)  I have tried machines that are not connected to this server (not thin client or RDP), but are on the same network, they can load up any web page fine with no issues.
2.) On the server I have tried Opera, Chrome, IE and Firefox, all have the same exact problem.
3.) Tried different DNS servers just to be sure, even though it only effects the server and no one else.
Based on these facts I know that it is something wrong with the server, but not tied to a specific brower.  In all browsers when you load up a page in question it just sits there with a blank screen trying to load, it never generates any errors. 
The Event Viewer is also clean, no errors.  So with no errors I have had trouble trying to find a starting place for this.  Things I have tried:
1.) ipconfig /flushdns to try and clear out any DNS issues
2.) Changing the DNS servers for the server to 8.8.8.8 and 4.2.2.2
3.) Scanning for Viruses and Malware/Spyware
4.) Checking proxy settings on the server
5.) Updating and then removing Adobe Flash (thought it was tied to flash at first).  Problem persists even with no flash player installed.
6.) Completed a failed update of .net, no effect
7.) Loading up browsers in debug mode to try and find anything in the site code that I could relate between failed sites.  I found nothing I could identify
Of all issues to finally be stumped on this seems like an easy one, but I can't even begin to come up with an idea at this point. 
Help is most appreciated, thank you!

Hi,
Extension Mechanisms for DNS (EDNS0 as defined in RFC 2671) allow DNS requestors to advertise the size of their UDP packets and facilitate the transfer of packets larger than
512 octets, the original DNS restriction for UDP packet size (RFC 1035).
But this would cause drop packets because of some DNS servers or hosts don’t support this. This always causes some website inaccessible.
Using Extension Mechanisms for DNS (EDNS0)
http://technet.microsoft.com/en-us/library/cc785769(v=ws.10).aspx
Nslookup, can you get the name resolved?
In addition, try use IP address access the website and check the result.
Hope this helps.

Similar Messages

  • Windows Server 2008 R2 - Won't load certain web pages - Happens in all browers - Won't do windows updates

    This server (Windows Server 2008 R2 Standard with SP1) is used to host thin clients as well as RDP sessions.  One morning the office is fine, they come back from lunch and all of the sudden they can't load certain web pages, such as adobe.com
    and pandora.com to name a couple.  This was roughly 3 days ago. 
    1.)  I have tried machines that are not connected to this server (not thin client or RDP), but are on the same network, they can load up any web page fine with no issues.
    2.) On the server I have tried Opera, Chrome, IE and Firefox, all have the same exact problem.
    3.) Tried different DNS servers just to be sure, even though it only effects the server and no one else.
    Based on these facts I know that it is something wrong with the server, but not tied to a specific brower.  In all browsers when you load up a page in question it just sits there with a blank screen trying to load, it never generates any errors. 
    The Event Viewer is also clean, no errors.  So with no errors I have had trouble trying to find a starting place for this.  Things I have tried:
    1.) ipconfig /flushdns to try and clear out any DNS issues
    2.) Changing the DNS servers for the server to 8.8.8.8 and 4.2.2.2
    3.) Scanning for Viruses and Malware/Spyware
    4.) Checking proxy settings on the server
    5.) Updating and then removing Adobe Flash (thought it was tied to flash at first).  Problem persists even with no flash player installed.
    6.) Completed a failed update of .net, no effect
    7.) Loading up browsers in debug mode to try and find anything in the site code that I could relate between failed sites.  I found nothing I could identify
    Of all issues to finally be stumped on this seems like an easy one, but I can't even begin to come up with an idea at this point. 
    I have tried to lay out all of the facts that I know as plainly as I can.  I am hoping that someone has seen this before as this issue is effecting a number of differnt users and keeping them from doing portions of their job.
    Help is most appreciated, thank you!

    I was able to figure out a solution.
    CAUSE:
    It appears that the Internet isn’t fully up to date and ready to use EDns -- which is enabled on Windows Server 2008 R2 by default. The solution for this is to disable Edns. Note that this isn’t
    a problem for most Windows Server 2008 R2 member servers.  It’s only a problem for DNS *servers* that do recursive lookups.  i.e. likely only your domain controller will be affected if that is where your DNS Server role exists.
    SOLUTION:
    To disable EDns, you can do it from the command prompt, or by editing the registry.
    Create a DWORD called EnableEDNSProbes and set to 0 in HKLM\SYSTEM\CurrentControlSet\services\DNS\Parameters
    Restart the DNS Server service for it to take effect.

  • Safari 6 Won't Load Certain Web Pages

    I have installed Mountain Lion on two machines. One is working great. But, on the other, there are certain web pages that won't load in Safari 6.
    Facebook
    Apple Discussions
    I've reset Safari and cleaned up cache using OnyX. Has anyone else experienced this? Any advice would be appreciated.
    Thanks, Greg

    I'm thinking it may be a DNS issue. I cleared my DNS cache using OnyX and my problem went away. OnyX is a free utility and is very useful. You can get it here:
    http://www.titanium.free.fr/download.php?sid=b94ceb83c26f4f935b661c52a5f8bff1
    Ever since I did that, I haven't had any other issues. Good luck!

  • New I pad won't load certain web pages unless I clear cache and history every time

    New I pad 64gb with Telstra pre paid.
    Full signal 3G
    Everything up to date.
    This is the scinario I am getting, and it's getting worse. I am actually writing this on my other I pad as the new one won't load this page!!!! Not happy!
    Lets say I'm on e bay searching stuff and suddenly it won't load any more pages from the search results. I can open a new tab and load other sites so the internet is working, but at this instant i cannot look at any eBay pages on the new I pad.
    I go into settings and clear browsing history and the cookies, go back into safari and I can now load eBay and view the page that wouldnt load before. Sometimes this method will work for an hour, sometimes only 2-3 mins.
    This fault is happening more and more frequently, I was on yahoo earlier reading news. Then the page wouldn't load. Couldn't load previous page either exactly the same as with eBay.
    So I go on apple.com.au and sign in to support to ask them. Page won't load . GRRRR!
    Clear the cache etc and it's fine for a few mins then the same so I am writing this off our old I pad 1, using the Internet tethered from the new iPad that wouldn't load this page
    It's happening more and more I don't know if it's a problem with Telstra or with the I pad? Is this a common problem?
    I have tried Mercury browser and Terra browser and the fault remains.
    Seems to be on any website it can happen now.
    And now when it does, I can't check e mail, load maps, carry out speed tests anything Internet related.
    I can tether the I pad and it works fine on my old one.
    Maybe faulty I pad?

    I'm thinking it may be a DNS issue. I cleared my DNS cache using OnyX and my problem went away. OnyX is a free utility and is very useful. You can get it here:
    http://www.titanium.free.fr/download.php?sid=b94ceb83c26f4f935b661c52a5f8bff1
    Ever since I did that, I haven't had any other issues. Good luck!

  • Iphone 6 won't load certain web pages displays hyperlink 'GO' and nothing else

    II've just upgraded to an iPhone 6 although I had the same issue with my iPhone 5 just before I changed phones.
    WHen I am connected to wifi, my phone will not open certain weblinks within Facebook app and displays a blank white screen with the word 'go' and nothing else. When I click 'go' nothing happens.
    Also within my Guardian app, the banner adverts display the same (blank with the word GO)
    I'm not very technical but it seems to have a problem with shortened weblinks.
    ALso the phone is slow to load web pages when I'm on wifi and I often have to reload and reload to get anywhere in Safari.
    I don't seem to have the same problem when I'm using 3G.
    Thanks for any advice in advance.

    My wifi is through Sky but it can't be that as it doesn't happen on my iPad or on my husband's iPhone.
    When I look it is redirecting to the page anrdoezr.net rather than the page I want.

  • I'm using Windows 8.1 and the browser won't load any web page. I downloaded the latest one from the website. Any help would be great. All other browsers work.

    I'm using Windows 8.1 and the browser won't load any web page. I downloaded the latest one from the website. Any help would be great. All other browsers work.

    Hi curtismoxam,
    Please try these troubleshooting steps: [[Fix problems connecting to websites after updating Firefox]]

  • IMac won't load some web pages

    I just got wireless internet out on my farm and hooked up my fairly new IMac G5 to it. When I connect it directly to the antennae (not through a router) everything works great. When I hook it through a router ( I have used linksys wireless g and a netgear wgr613 v6) the Imac will only load certain web pages. e.g. It will load Apple.com, but won't play the Macworld keynote address. It won't load Ebay at all. It will load cnn.com and others just fine. When I bypass the router, everything loads and works. I have also taken the IMac to work and hooked up to our office ethernet through a router, multiple wireless access points, and hubs, and the IMac works great all of the time. I tried the linksys first and it works for a little while and then fizzles away to nothing working. I then upgraded firmware and it worked a little while longer before dying. The netgear works all of the time for some, but not everything. When I hookup my Windows XP notebook, it works all of the time on either router. I have tried both routers either wireless, or wired, with the same results. Thanks....
    iMac G5 iSight   Mac OS X (10.4.4)  

    Yes, that did it. I put in the two DNS numbers for my ISP and that solved the problem. Still don't understand why that caused it, but yet worked sometimes. Oh well.....Thank you
    iMac G5 iSight   Mac OS X (10.4.4)  

  • Problems loading certain web pages

    Lately, in the past week or two, I have been noticing that Safari wont load certain web pages. It jsut stops and then I get a blank white page with no error message. I have noticed this mostly with Facebook, but also found the same problems with Evite.com when I click the login link. I have tried using Firefox and it seems to d better, especially with Facebook, but it did hang up on it one time. I cant get to the login page on Evite with either browser. I am using OpenDNS, but dont have these things blocked. I can access them fine from a PC laptop through the same connection via my wireless modem.

    Carolyn Samit wrote:
    HI,
    *I cant get to the login page on Evite with either browser*
    Open Keychain Access (Applications/Utiities). Select Passwords on the left then delete the Evite under Names on the right. Launch Safari or Firefox, go to the Evite site and login. After typing in your password, click Always Allow
    I opened Keychain, but there is nothing in there for Evite under passwords?
    Try Safari Maintenance
    Repair disk permissions...
    Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
    Tried this, but still having problems in both Safari and Firefox. Facebook seems to be random, more often not working than it is. Still no login page with Evite?

  • HT1338 Why is safarai loading certain web pages so slowly?

    Why is safari loading certain web pages so slowly?

    Emptied the Safari cache lately?
    Press Command + Option + E then quit and relaunch Safari to test.
    If that doesn't help, try this DNS.
    Open System Preferences > Network > Advanced > DNS
    Click + and type:
    208.67.222.222
    Click + again and do the same.
    208.67.220.220
    Click OK.
    Quit and relaunch Safari to test.

  • Safari won't load some web pages.

    Ever since installing Mavericks, Safari won't load some web pages (including these Apple support pages). I'm able to load the pages using Chrome or Firefox. Does anyone know of any settings in Safari 7 or the Mavericks system preferences that would be causing this?
    -Greg

    I had the same problem... I ran disk repair and repaired all permissions on the HD then reopened safari now it's working fine.

  • Windows server 2008 R2 won't update

    I have a Windows Server 2008 R2 which won't install updates coming from a WSUS server.  All other servers are installing updates fine.  They fail with the code 52D.  If i look at the Application Event log i can see the install start but then
    each update fails with the following events and IDs:
    Event ID: 11325
    Product: Microsoft Office professional Plus 2010 -- Error 1325. 'administrator' is not a valid short file name
    Event ID 1024
    Product: Microsoft Office Professional Plus 2010 - Update 'Update for Microsoft InfoPath 2010 (KB2817369) 32-Bit Edition' could not be installed. Error code 1603. Windows Installer can create logs to help troubleshoot issues with installing software
    packages. Use the following link for instructions on turning on logging support: http://go.microsoft.com/fwlink/?LinkId=23127
    Both events have the source as MsiInstaller
    Also i have an update for Adobe Reader which is an .msp file which also won't install and gives the error message:
    Error 1325.administrator is not a valid short name file.
    I have a feeling this has something to do with Windows Installer but i'm unsure how to fix it.
    Please help
    Thanks

    Hi,
    2014-05-14   
    14:30:03:921 5336   16a8  
    Handler         MSP Error List:
    2014-05-14   
    14:30:03:921 5336   16a8  
    Handler         1: 1325 2: administrator
    2014-05-14   
    14:30:03:921 5336   16a8  
    Handler          
    : MSI transaction completed. MSI: 0x80070643, Handler: 0x8024200b, Source: No, Reboot: 0
    2014-05-14   
    14:30:03:921 5336   16a8  
    Handler          
    : WARNING: First failure for update {5D5C9291-182E-48CD-B1CB-B245E9BB5B0B}, transaction error = 0x8024200b, MSI result = 0x80070643, MSI action = CostFinalize
    2014-05-14   
    14:30:03:922 1148   1878  
    AU      >>## 
    RESUMED  ## AU: Installing update [UpdateId = {8AF4924E-500A-4AFF-B4DB-C64E9F0C7102}]
    2014-05-14   
    14:30:03:922 1148   1878  
    AU        # WARNING: Install failed, error = 0x80070643 / 0x0000052D
    2014-05-14   
    14:30:03:922 5336   16a8  
    Handler          
    : WARNING: Operation failed at update 0, Exit code = 0x8024200B
    The log is filled with such kind of errors. And based on these message, I found some valuable information that worth a try.
    What causes error 0x80070643 / 0x0000052D ?
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/4f64bcbe-54dc-4e66-a83c-dfc2cdc0fb7e/what-causes-error-0x80070643-0x0000052d-
    Error 0x80070643 with Office 2010 Patches KB2553065 KB2584066 KB2553091
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/df31233e-fdd8-4c2f-b0db-6767cd4a0822/error-0x80070643-with-office-2010-patches-kb2553065-kb2584066-kb2553091?forum=winserverwsus
    The two thread discussed the same error with solution in it. And the following article applied up to office 2007. But the article reviewed at September 12, 2011. Not 100 percent
    sure if it applied, but you can have a try.
    If you disable the Ose.exe file, Microsoft Office updates do not install when you use Microsoft Windows Server Update Services or the Microsoft Update Web site to deploy software
    updates and hotfixes to computers in the organization
    http://support.microsoft.com/kb/903774
    Hope this helps.

  • Safari Slow to Load Certain Web Pages

    Has anyone found a fix for the web pages that get "stuck"

    This has been an ongoing problem in Safari v2.0x with OS X v10.4. However, I would describe this as "Safari stalls when loading Web pages." It seems like it may happen on certain pages, but it has been my experience that this can happen on any Web page at any give time: In fact, it just happened when I tried to load the Safari Discussions forum page!
    - Safari attempts to load a Web page
    - Progress bar in address field stalls at mid-point or later
    - Web page never finishes loading but sometimes, if you're patient, it takes a minute or more to load, but eventually finishes
    - More often, cancelling the page load (Command/Period) and then immediately hitting Command/R (or selecting Reload Page from the View menu) usually loads the page immediately!
    Once, I thought it might be favicons, but I had just reset that folder to Read Only. Also, I just used Font Book to Resolve Duplicate Fonts before seeing it happen again. This is pretty frustrating, and never seems to get better.

  • Safari won't open certain web pages

    Hi,
    I can't get Safari to open certain web pages. This has only been the case for the last week or so, I could happily view them before.
    2 examples are : www.facebook.com and www.quaysws.co.uk
    can anybody please help, it just seems a bit weird...

    I just got this link, http://www.quaysws.co.uk/flash/page1.php,
    to open in both Safari and Firefox. Mind you at the same time, I cannot get Apple.com to open in Safari I'm running Leopard with Safari 3.0.4. Whoa Safari just decided that Apple.com does exist and opened it without me first having to restart the computer. Safari definitely has some bugs but you may want to make sure that you don't have any 3rd party add-ons set up and you may have to reinstall.

  • My MacBook Pro won't load any web page I have restarted and safe booted still nothing

    My MacBook Pro will not load any web pages. Safari opens but when I click on top sites or type in a website it will start but not get past half of the address before stopping and going no further. I have restarted and restarted in safe boot and still no change. I'm am connected to the internet wirelessly and my iPad mini is connecting to the internet wirelessly fine, so I think the internet is fine. What can I try next?
    Thanks

    Reset Safari.
    Click Safari in the menu bar.
    From the drop down select "Reset Safari".
    Uncheck the boxes beside  all items.
    Just check the box beside “Remove all website data”.
    Click "Reset".
    Empty Caches
    Safari > Preference > Advanced
    Checkmark the box for "Show Develop menu in menu bar".
    Develop menu will appear in the Safari menu bar.
    Click Develop and select "Empty Caches" from the dropdown.
    Turn off Extensions if any, and launch Safari.
    Safari > Preferences > Extensions

  • Why won't Firefox 3.6.17 on Mac load certain web pages but will load others?

    I'm using Firefox 3.6.17 on Mac (10.4.11), can anyone explain why I cannot access Yahoo, Google, Cnn, Bing, but can access other sites? Those web pages starts to load, then display (Untitled) in tab with a blank page. I have cleared everything in my cache and cookies and reinstalled Firefox and nothing helps. This problem started a few days ago and previously there was no problem and I didn't make any changes to Firefox. Thanks for the help.

    Found a solution to the problem. The permissions for the firefox.app file were not set to admin - read-write. After adding this permission using the get info menu item when right clicking the file name in the applications folder, the tab now automatically opens when clicking on Email link.

Maybe you are looking for

  • Issue transporting data sources in BI 7.0

    Hello guyz This question is regarding transporting data sources for BI 7.0. 1. First we transport master data sources from ECC Dev to ECC QA. 2. In BI 3.x version, we would need to first replicate these data sources form ECC QA to BI QA. 3. Then we w

  • OWB and Workflow

    I'm running OWB 10g on a 10g database. I'm attempting to deploy the workflow process developed in OWB to the edw schema in my database. I'm receiving the following error. RPE-02018: Oracle Workflow schema OWF_MGR on host 10.150.10.20 cannot be access

  • Io5 music app not displaying Podcasts correctly

    Hi, I have a 3GS 16GB running io5. I tried yesterday loading about 20 episodes of a podcast onto it. I had these episodes as MP3s on CD. I imported them into iTunes and then changed the Media type on the  files to Podcast so they'd show up together i

  • Login issues with SUNWuwc

    Hi forum, I have been trying to get the outlook plugin for the enterprise calendar server working. The calendar part itself works to some extent but the end users are not happy because each time they startup outlook the addressbook server complains.

  • ERROR CODE: 16 HELP!

    I just got an ERROR CODE 16 I tried doing the GET INFO, permissions reset. Didn't work, still getting the ERROR CODE on ALL my adobe creative suite 5 applications. I run a MAC Macbook Pro Retina Yosemite 10.10.2 Please help me avoid having to go thro