Windows server 2008 R2 x64 Authentication failure while try to access Windows server 2003 R2

Hello,
I try to access Windows Server 2003 R2 Standard from Windows Server 2008 R2 x64 standard using integrated windows authentication . And because my application tries to read SQL server i'm getting and error that user is not trusted. Then I tried to open a
simple shared folder on 2003 and none of the users is able to do it. Both servers are part of common workgroup in the same IP range. Using domain is not an option. Migrating 2003 to 2008 is not an option either. The specific DB provider I have to use
supports only windows authentication, so creating user into SQL server is not an option too. I have tested many applications and cases which requires/uses windows authentication and non of the manage to connect.
Any help is very welcome because things are urgent!
Authentication failure

That method in workgroup mode may be a problem.
Authentication in SQL Server
Might ask them over here.
SQL Server forums on
MSDN
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Similar Messages

[SOLVED] Authentication failure while try to login in GDM

Hi,
I just installed Arch Linux 64 bit on Virtualbox (I using GNOME and GDM). I have set on rc.conf daemon arrays to start dbus and gdm and it run well.
My problem is I can't login using root. When I try to login, it prompt Authentication failure
I can't re-configure my rc.conf because I can't login, and I stuck in GDM screen..
When I try to use "Ctrl+Alt+F1", it effects to my host (ubuntu), not to my guest Arch
How to skip GDM to started for this condition and how to solve this authentication failure ?
Last edited by alphazero (2011-11-20 11:51:19)

Since I run on virtualbox. I can't use Ctrl-F1, so I try to edit rc.conf using LiveCD
After I modify rc.conf and remove gdm in daemon array, I reboot and login as root.. adduser and finally it works login as user
And I add again gdm after it worked to log as user.
So problem solved.. Thanks to wonder for your help.
Last edited by alphazero (2011-11-20 11:50:54)

64 bit Weblogic Server 10.3.2 installation on Windows Server 2008 R2 x64 ?

Hi,
I'm trying to install 64 bit version of Weblogic Server 10.3.2 on my 64 bit OS Windows Server 2008 R2 SP2.
Firstly I downloaded "jdk-6u24-windows-x64.exe" and installed it on my 64 bit platform.
I downloaded "wls1032_generic.jar" and try to install it by the command below
"java -d64 -jar wls1032_generic.jar"
however I got the message below
Unrecognized option: -d64
Couldn't create the Java virtual machine
Any options about this problem. Where am I making mistake?

Hi,
You need to make sure the following things :
1). If you want to run your WLS on W 64 bit mode then You need to use Generic Jar installer Example: *"java -jar wls1032_generic.jar"*
2). The above Jar should be installed only using a 64 Bit JVM so that all the 64 bit libraries will be available with the WebLogic while installing it. So first of all Download a 64 Bit JVM in your Woindows box.
Then just run the following command to check if the JVM is 6t4 bit or not:
set JAVA=HOME=C:\My64BitJDK\jdk1.6.0_21
*$JAVA_HOME\bin\java -version*
3). Now u can run your WebLogic Installer like following:
*$JAVA_HOME\bin\java -jar wls1032_generic.jar*

Windows Server 2008 R2 x64 - Windows Update Errors...

Hello,
I've a windows 2008 R2 Enterprise SP1 server that I've applied Windows updates to this evening. A large number were successful, however there are 13 that will not install and keep on failing. I've run sfc/scannow which found and repaired some
errors - restarted server - no difference.
Please see windowsupdate.log output below (apologies for the length). I've tried installing individual updates from the 13 but it makes no difference and the errors are just the same. It seems to be the same error for each update although unfortunately doesn't
mean much to me. Any assistance would be greatly appreciated.
Thanks gents.
2014-05-13 20:45:13:189 900 f84 AU AU received approval from Ux for 13 updates
2014-05-13 20:45:13:189 900 f84 AU AU setting pending client directive to 'Progress Ux'
2014-05-13 20:45:13:219 900 126c AU BeginInteractiveInstall invoked for Download
2014-05-13 20:45:13:219 900 126c AU Auto-approving update for download, updateId = {1B127611-D28E-4167-A1DC-243A51BC528F}.203, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0
2014-05-13 20:45:13:219 900 126c AU Auto-approving update for download, updateId = {C750962E-9D5E-45CE-9967-AE2D67115966}.202, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0
2014-05-13 20:45:13:219 900 126c AU Auto-approving update for download, updateId = {332AA342-7AC4-4FB4-9C27-C2C9F4EAE6C0}.201, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0
2014-05-13 20:45:13:219 900 126c AU Auto-approving update for download, updateId = {3732354D-3DAE-4E71-B82C-61A12C300F72}.201, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0
2014-05-13 20:45:13:219 900 126c AU Auto-approving update for download, updateId = {A0689F68-807A-4D39-8112-8F931F8D0D85}.202, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0
2014-05-13 20:45:13:220 900 126c AU Auto-approving update for download, updateId = {88126772-A2FD-490A-8C84-787E94DAFE65}.201, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0
2014-05-13 20:45:13:220 900 126c AU Auto-approving update for download, updateId = {DFAA6388-FE05-49D7-A410-71B92D1C1B37}.202, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0
2014-05-13 20:45:13:220 900 126c AU Auto-approving update for download, updateId = {E2186FA0-D10C-4E1D-9619-A4FEB1ECF00B}.201, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0
2014-05-13 20:45:13:220 900 126c AU Auto-approving update for download, updateId = {FA04F2A3-4DB5-4903-A08C-ADDFCF93EE28}.201, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0
2014-05-13 20:45:13:220 900 126c AU Auto-approving update for download, updateId = {7E8ACCAD-2892-4F2D-9549-1FF8BE44AAD1}.203, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0
2014-05-13 20:45:13:220 900 126c AU Auto-approving update for download, updateId = {99C920B7-65AB-4ACD-A4AD-C4F522E4D7A9}.201, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0
2014-05-13 20:45:13:220 900 126c AU Auto-approving update for download, updateId = {EDE986B7-03CE-4B0C-8891-AF09113CB0DB}.200, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0
2014-05-13 20:45:13:220 900 126c AU Auto-approving update for download, updateId = {338B46CC-C71E-4294-A9D3-DF943FFEF642}.201, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0
2014-05-13 20:45:13:220 900 126c AU Auto-approved 13 update(s) for download (for Ux)
2014-05-13 20:45:13:220 900 126c AU UpdateDownloadProperties: 0 download(s) are still in progress.
2014-05-13 20:45:13:220 900 126c AU #############
2014-05-13 20:45:13:220 900 126c AU ## START ## AU: Download updates
2014-05-13 20:45:13:220 900 126c AU #########
2014-05-13 20:45:13:220 900 126c AU   # Approved updates = 13
2014-05-13 20:45:13:222 900 126c AU AU initiated download, updateId = {1B127611-D28E-4167-A1DC-243A51BC528F}.203, callId = {AE497400-C1FA-434C-96A2-442420AD7155}
2014-05-13 20:45:13:225 900 1384 DnldMgr *************
2014-05-13 20:45:13:225 900 126c AU AU initiated download, updateId = {C750962E-9D5E-45CE-9967-AE2D67115966}.202, callId = {10C2CAD4-1000-4CFF-B414-F762841CC51D}
2014-05-13 20:45:13:225 900 1384 DnldMgr ** START ** DnldMgr: Downloading updates [CallerId = AutomaticUpdatesWuApp]
2014-05-13 20:45:13:225 900 1384 DnldMgr *********
2014-05-13 20:45:13:226 900 1384 DnldMgr   * Call ID = {AE497400-C1FA-434C-96A2-442420AD7155}
2014-05-13 20:45:13:226 900 1384 DnldMgr   * Priority = 3, Interactive = 1, Owner is system = 1, Explicit proxy = 0, Proxy session id = 2, ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}
2014-05-13 20:45:13:226 900 1384 DnldMgr   * Updates to download = 1
2014-05-13 20:45:13:226 900 1384 Agent   *   Title = Security Update for Windows Server 2008 R2 x64 Edition (KB2868626)
2014-05-13 20:45:13:226 900 1384 Agent   *   UpdateId = {1B127611-D28E-4167-A1DC-243A51BC528F}.203
2014-05-13 20:45:13:226 900 1384 Agent   *     Bundles 1 updates:
2014-05-13 20:45:13:226 900 1384 Agent   *       {7E051B49-3C92-45B0-9138-97BEDCE52225}.201
2014-05-13 20:45:13:229 900 1384 DnldMgr *********** DnldMgr: New download job [UpdateId = {7E051B49-3C92-45B0-9138-97BEDCE52225}.201] ***********
2014-05-13 20:45:13:229 900 1384 DnldMgr   * Queueing update for download handler request generation.
2014-05-13 20:45:13:229 900 1384 DnldMgr Generating download request for update {7E051B49-3C92-45B0-9138-97BEDCE52225}.201
2014-05-13 20:45:13:239 900 1384 Handler Generating request for CBS update 7E051B49-3C92-45B0-9138-97BEDCE52225 in sandbox C:\Windows\SoftwareDistribution\Download\b29165aeaa9b7c6358a11fe608ad59db
2014-05-13 20:45:13:239 900 1384 Handler Selected payload type is ptExpress
2014-05-13 20:45:13:240 900 126c AU AU initiated download, updateId = {332AA342-7AC4-4FB4-9C27-C2C9F4EAE6C0}.201, callId = {C6D9C785-32FE-4AD7-9DEB-C7105A3C1262}
2014-05-13 20:45:13:240 900 1384 Handler UH: DpxRestoreJob returned 0x80070002
2014-05-13 20:45:13:240 900 1384 Handler Detected download state is dsHavePackage
2014-05-13 20:45:13:243 900 126c AU AU initiated download, updateId = {3732354D-3DAE-4E71-B82C-61A12C300F72}.201, callId = {F055F0F1-9AE5-433A-A2BD-03D142912DA1}
2014-05-13 20:45:13:247 900 126c AU AU initiated download, updateId = {A0689F68-807A-4D39-8112-8F931F8D0D85}.202, callId = {326F2698-90E8-421E-B5B1-2A64797E7842}
2014-05-13 20:45:13:250 900 126c AU AU initiated download, updateId = {88126772-A2FD-490A-8C84-787E94DAFE65}.201, callId = {065E2D23-EF67-47E1-8C87-440BD7137483}
2014-05-13 20:45:13:253 900 126c AU AU initiated download, updateId = {DFAA6388-FE05-49D7-A410-71B92D1C1B37}.202, callId = {606C3C01-D996-4932-A142-30A8B192F2C0}
2014-05-13 20:45:13:256 900 126c AU AU initiated download, updateId = {E2186FA0-D10C-4E1D-9619-A4FEB1ECF00B}.201, callId = {4805FBCE-4AB1-4751-A8AE-0847B69EA142}
2014-05-13 20:45:13:259 900 126c AU AU initiated download, updateId = {FA04F2A3-4DB5-4903-A08C-ADDFCF93EE28}.201, callId = {04DDA2A9-B6C8-47F0-BE70-B0F50D7A6BA2}
2014-05-13 20:45:13:262 900 126c AU AU initiated download, updateId = {7E8ACCAD-2892-4F2D-9549-1FF8BE44AAD1}.203, callId = {E0241A77-09F1-4498-97A6-DDD57483954E}
2014-05-13 20:45:13:266 900 126c AU AU initiated download, updateId = {99C920B7-65AB-4ACD-A4AD-C4F522E4D7A9}.201, callId = {52A53948-0632-4E15-A14A-841FB5C95F61}
2014-05-13 20:45:13:269 900 126c AU AU initiated download, updateId = {EDE986B7-03CE-4B0C-8891-AF09113CB0DB}.200, callId = {AB354496-CB3D-4A07-9F3C-1069C43C61E1}
2014-05-13 20:45:13:272 900 126c AU AU initiated download, updateId = {338B46CC-C71E-4294-A9D3-DF943FFEF642}.201, callId = {E7AB48E8-5603-48BD-A051-1CCA7DFF4652}
2014-05-13 20:45:13:272 900 126c AU   # Pending download calls = 13
2014-05-13 20:45:13:272 900 126c AU <<## SUBMITTED ## AU: Download updates
2014-05-13 20:45:13:279 900 f84 AU Getting featured update notifications. fIncludeDismissed = true
2014-05-13 20:45:13:279 900 f84 AU No featured updates available.
2014-05-13 20:45:17:040 900 f84 Handler FATAL: CBS called Error with 0x80073712,
2014-05-13 20:45:17:041 900 1384 Handler FATAL: UH: 0x80073712: Async stage operation failed in CUHCbsHandler::StageCbsPackage
2014-05-13 20:45:17:056 900 1384 Handler FATAL: Request generation for CBS update complete with hr=0x80073712 and pfResetSandbox=0
2014-05-13 20:45:17:056 900 1384 Handler FATAL: Error source is 106.
2014-05-13 20:45:17:056 900 1384 DnldMgr FATAL: DM:CAgentDownloadManager::GenerateAllDownloadRequests: GenerateDownloadRequest failed with 0x80073712.
2014-05-13 20:45:17:056 900 1384 DnldMgr Error 0x80073712 occurred while downloading update; notifying dependent calls.
2014-05-13 20:45:17:254 900 1384 Agent *********
2014-05-13 20:45:17:254 900 12d0 AU >>## RESUMED ## AU: Download update [UpdateId = {1B127611-D28E-4167-A1DC-243A51BC528F}]
2014-05-13 20:45:17:254 900 1384 Agent ** END ** Agent: Downloading updates [CallerId = AutomaticUpdatesWuApp]
2014-05-13 20:45:17:254 900 12d0 AU   # WARNING: Download failed, error = 0x80073712
2014-05-13 20:45:17:254 900 1384 Agent *************
2014-05-13 20:45:17:259 900 1384 DnldMgr *************
2014-05-13 20:45:17:259 900 1384 DnldMgr ** START ** DnldMgr: Downloading updates [CallerId = AutomaticUpdatesWuApp]
2014-05-13 20:45:17:259 900 1384 DnldMgr *********
2014-05-13 20:45:17:259 900 1384 DnldMgr   * Call ID = {10C2CAD4-1000-4CFF-B414-F762841CC51D}
2014-05-13 20:45:17:259 900 1384 DnldMgr   * Priority = 3, Interactive = 1, Owner is system = 1, Explicit proxy = 0, Proxy session id = 2, ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}
2014-05-13 20:45:17:259 900 1384 DnldMgr   * Updates to download = 1
2014-05-13 20:45:17:259 900 1384 Agent   *   Title = Security Update for Windows Server 2008 R2 x64 Edition (KB2872339)
2014-05-13 20:45:17:259 900 1384 Agent   *   UpdateId = {C750962E-9D5E-45CE-9967-AE2D67115966}.202
2014-05-13 20:45:17:259 900 1384 Agent   *     Bundles 2 updates:
2014-05-13 20:45:17:259 900 1384 Agent   *       {45AFABD9-B938-457D-95EA-A32C2FA19D37}.202
2014-05-13 20:45:17:259 900 1384 Agent   *       {1E81D165-A493-4813-8526-04D8F35C37D8}.202
2014-05-13 20:45:17:262 900 1384 DnldMgr *********** DnldMgr: New download job [UpdateId = {45AFABD9-B938-457D-95EA-A32C2FA19D37}.202] ***********
2014-05-13 20:45:17:263 900 1384 DnldMgr   * All files for update were already downloaded and are valid.
2014-05-13 20:45:17:263 900 1384 DnldMgr *********** DnldMgr: New download job [UpdateId = {1E81D165-A493-4813-8526-04D8F35C37D8}.202] ***********
2014-05-13 20:45:17:263 900 1384 DnldMgr   * Queueing update for download handler request generation.
2014-05-13 20:45:17:263 900 1384 DnldMgr Generating download request for update {1E81D165-A493-4813-8526-04D8F35C37D8}.202
2014-05-13 20:45:17:269 900 1384 Handler Generating request for CBS update 1E81D165-A493-4813-8526-04D8F35C37D8 in sandbox C:\Windows\SoftwareDistribution\Download\371b4bee540898fe91c5fa6958cf73cc
2014-05-13 20:45:17:270 900 1384 Handler Selected payload type is ptExpress
2014-05-13 20:45:17:271 900 1384 Handler UH: DpxRestoreJob returned 0x80070002
2014-05-13 20:45:17:271 900 1384 Handler Detected download state is dsHavePackage
2014-05-13 20:45:18:265 900 f84 Handler FATAL: CBS called Error with 0x80073712,
2014-05-13 20:45:18:266 900 1384 Handler FATAL: UH: 0x80073712: Async stage operation failed in CUHCbsHandler::StageCbsPackage
2014-05-13 20:45:18:267 900 1384 Handler FATAL: Request generation for CBS update complete with hr=0x80073712 and pfResetSandbox=0
2014-05-13 20:45:18:267 900 1384 Handler FATAL: Error source is 106.
2014-05-13 20:45:18:267 900 1384 DnldMgr FATAL: DM:CAgentDownloadManager::GenerateAllDownloadRequests: GenerateDownloadRequest failed with 0x80073712.
2014-05-13 20:45:18:267 900 1384 DnldMgr Error 0x80073712 occurred while downloading update; notifying dependent calls.
2014-05-13 20:45:18:307 900 1384 Agent *********
2014-05-13 20:45:18:307 900 12d0 AU >>## RESUMED ## AU: Download update [UpdateId = {C750962E-9D5E-45CE-9967-AE2D67115966}]
2014-05-13 20:45:18:307 900 1384 Agent ** END ** Agent: Downloading updates [CallerId = AutomaticUpdatesWuApp]
2014-05-13 20:45:18:307 900 12d0 AU   # WARNING: Download failed, error = 0x80073712
2014-05-13 20:45:18:307 900 1384 Agent *************
2014-05-13 20:45:18:310 900 1384 DnldMgr *************
2014-05-13 20:45:18:310 900 1384 DnldMgr ** START ** DnldMgr: Downloading updates [CallerId = AutomaticUpdatesWuApp]
2014-05-13 20:45:18:310 900 1384 DnldMgr *********
2014-05-13 20:45:18:310 900 1384 DnldMgr   * Call ID = {C6D9C785-32FE-4AD7-9DEB-C7105A3C1262}
2014-05-13 20:45:18:310 900 1384 DnldMgr   * Priority = 3, Interactive = 1, Owner is system = 1, Explicit proxy = 0, Proxy session id = 2, ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}
2014-05-13 20:45:18:310 900 1384 DnldMgr   * Updates to download = 1
2014-05-13 20:45:18:310 900 1384 Agent   *   Title = Security Update for Windows Server 2008 R2 x64 Edition (KB2839894)
2014-05-13 20:45:18:310 900 1384 Agent   *   UpdateId = {332AA342-7AC4-4FB4-9C27-C2C9F4EAE6C0}.201
2014-05-13 20:45:18:310 900 1384 Agent   *     Bundles 1 updates:
2014-05-13 20:45:18:310 900 1384 Agent   *       {B4DB0FFF-81FE-4D1D-BF01-D59B829303FC}.201
2014-05-13 20:45:18:314 900 1384 DnldMgr *********** DnldMgr: New download job [UpdateId = {B4DB0FFF-81FE-4D1D-BF01-D59B829303FC}.201] ***********
2014-05-13 20:45:18:314 900 1384 DnldMgr   * Queueing update for download handler request generation.
2014-05-13 20:45:18:314 900 1384 DnldMgr Generating download request for update {B4DB0FFF-81FE-4D1D-BF01-D59B829303FC}.201
2014-05-13 20:45:18:321 900 1384 Handler Generating request for CBS update B4DB0FFF-81FE-4D1D-BF01-D59B829303FC in sandbox C:\Windows\SoftwareDistribution\Download\7d02b28581a54bc209cde32aa0661586
2014-05-13 20:45:18:321 900 1384 Handler Selected payload type is ptExpress
2014-05-13 20:45:18:322 900 1384 Handler UH: DpxRestoreJob returned 0x80070002
2014-05-13 20:45:18:322 900 1384 Handler Detected download state is dsHavePackage
2014-05-13 20:45:18:655 900 f84 Handler FATAL: CBS called Error with 0x80073712,
2014-05-13 20:45:18:655 900 1384 Handler FATAL: UH: 0x80073712: Async stage operation failed in CUHCbsHandler::StageCbsPackage
2014-05-13 20:45:18:656 900 1384 Handler FATAL: Request generation for CBS update complete with hr=0x80073712 and pfResetSandbox=0
2014-05-13 20:45:18:656 900 1384 Handler FATAL: Error source is 106.
2014-05-13 20:45:18:656 900 1384 DnldMgr FATAL: DM:CAgentDownloadManager::GenerateAllDownloadRequests: GenerateDownloadRequest failed with 0x80073712.
2014-05-13 20:45:18:656 900 1384 DnldMgr Error 0x80073712 occurred while downloading update; notifying dependent calls.
2014-05-13 20:45:18:680 900 1384 Agent *********
2014-05-13 20:45:18:680 900 12d0 AU >>## RESUMED ## AU: Download update [UpdateId = {332AA342-7AC4-4FB4-9C27-C2C9F4EAE6C0}]
2014-05-13 20:45:18:680 900 1384 Agent ** END ** Agent: Downloading updates [CallerId = AutomaticUpdatesWuApp]
2014-05-13 20:45:18:680 900 12d0 AU   # WARNING: Download failed, error = 0x80073712
2014-05-13 20:45:18:680 900 1384 Agent *************
2014-05-13 20:45:18:684 900 1384 DnldMgr *************
2014-05-13 20:45:18:684 900 1384 DnldMgr ** START ** DnldMgr: Downloading updates [CallerId = AutomaticUpdatesWuApp]
2014-05-13 20:45:18:684 900 1384 DnldMgr *********
2014-05-13 20:45:18:684 900 1384 DnldMgr   * Call ID = {F055F0F1-9AE5-433A-A2BD-03D142912DA1}
2014-05-13 20:45:18:684 900 1384 DnldMgr   * Priority = 3, Interactive = 1, Owner is system = 1, Explicit proxy = 0, Proxy session id = 2, ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}
2014-05-13 20:45:18:684 900 1384 DnldMgr   * Updates to download = 1
2014-05-13 20:45:18:684 900 1384 Agent   *   Title = Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2742599)
2014-05-13 20:45:18:684 900 1384 Agent   *   UpdateId = {3732354D-3DAE-4E71-B82C-61A12C300F72}.201
2014-05-13 20:45:18:684 900 1384 Agent   *     Bundles 1 updates:
2014-05-13 20:45:18:684 900 1384 Agent   *       {D7F10B98-0B4D-402C-B0A5-FF2135F8620C}.201
2014-05-13 20:45:18:687 900 1384 DnldMgr *********** DnldMgr: New download job [UpdateId = {D7F10B98-0B4D-402C-B0A5-FF2135F8620C}.201] ***********
2014-05-13 20:45:18:687 900 1384 DnldMgr   * Queueing update for download handler request generation.
2014-05-13 20:45:18:687 900 1384 DnldMgr Generating download request for update {D7F10B98-0B4D-402C-B0A5-FF2135F8620C}.201
2014-05-13 20:45:19:325 900 1384 Handler Generating request for CBS update D7F10B98-0B4D-402C-B0A5-FF2135F8620C in sandbox C:\Windows\SoftwareDistribution\Download\44b836e953f10e780a421d6fb4995a79
2014-05-13 20:45:19:325 900 1384 Handler Selected payload type is ptExpress
2014-05-13 20:45:19:326 900 1384 Handler UH: DpxRestoreJob returned 0x80070002
2014-05-13 20:45:19:326 900 1384 Handler Detected download stat
M Tipler

Unfortunately that made no difference - the updates still won't install and the checksur.log file still contains the same data...
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.22471
Package Version 25.0
2014-05-14 08:15
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
Checking Component Store
(f)   CSI Missing Winning Component Key   0x00000000   amd64_microsoft-windows-csrsrv_31bf3856ad364e35_6.1.7601.18113_none_27ac1dcabbfe37b8
(f)   CSI Missing Winning Component Key   0x00000000   amd64_microsoft-windows-smss_31bf3856ad364e35_6.1.7601.18113_none_0a5f8ec22fd235a9
(f)   CSI Missing Winning Component Key   0x00000000   wow64_microsoft-windows-smss_31bf3856ad364e35_6.1.7601.18113_none_14b439146432f7a4
(f)   CSI Missing Winning Component Key   0x00000000   wow64_microsoft-windows-csrsrv_31bf3856ad364e35_6.1.7601.18113_none_3200c81cf05ef9b3
Summary:
Seconds executed: 446
Found 4 errors
CSI Missing Winning Component Key Total count: 4
(w)   Unable to get system disk properties   0x0000045D   IOCTL_STORAGE_QUERY_PROPERTY   Disk Cache
Looks like a repair install is required. I'll keep you updated.
M Tipler

ERROR Installing SAP NetWeaver PI 7.1 EHP 1 on Windows Server 2008 R2 x64

Hi!
I'm trying to install SAP NWPI 7.1 on a Windows Server 2008 R2 Standard, but in the step "Create Java User" stop the process when this creating the SAPJSF user, here's my system specifications:
OS: Windows Server 2008 R2 x64 Standard
RAM: 2 GB
Free Space: 100 GB
Virtual Memory: 16384 MB
Environment Variables:
CPIC_MAX_CONV = 200
JAVA_HOME = JDK 1.5 64 Bits
On running phase: Create Java Users, the installation stops when try to create the SAPJSF user, here's the output log:
ERROR 2010-06-16 12:18:28.968 [sixxcstepexecute.cpp:984]
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|6|0|createJSF was executed with status ERROR ( Last error reported by the step :. DIAGNOSIS: For more details see output of log file:).
INFO 2010-06-16 12:17:57.968
Output of C:\usr\sap\SPI\DVEBMGS00\exe\jstart.exe UserCheck.jstart -c ashost=CUNDISRV143 -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SAPJSF -alias SAPJSF -p XXXXXX -r SAP_BC_JSF_COMMUNICATION -user_type system -message_file UserCheck.message is written to the logfile C:/Program Files/sapinst_instdir/NW71/INSTALL/SYSTEM/ADA/STD/AS/UserCheck.log.
WARNING 2010-06-16 12:18:28.593
Execution of the command "C:\usr\sap\SPI\DVEBMGS00\exe\jstart.exe UserCheck.jstart -c ashost=CUNDISRV143 -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SAPJSF -alias SAPJSF -p XXXXXX -r SAP_BC_JSF_COMMUNICATION -user_type system -message_file UserCheck.message"; finished with return code 8. Output:
INFO 2010-06-16 12:18:28.609
Removed file C:\Program Files\sapinst_instdir\NW71\INSTALL\SYSTEM\ADA\STD\AS\dev_UserCheck.
ERROR 2010-06-16 12:18:28.640
CJS-30197 . DIAGNOSIS: For more details see output of log file:
ERROR 2010-06-16 12:18:28.968
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|6|0|createJSF was executed with status ERROR ( Last error reported by the step :. DIAGNOSIS: For more details see output of log file:).
WARNING 2010-06-16 12:18:29.125
Could not get property IDs of the JavaScript object.
ERROR 2010-06-16 12:18:29.125
FJS-00010 Could not get value for property
Best Regards,
David

Hi All,
As per the latest available sapinst and the kernel DVS's the system does not come up in the Java stack/Dual stack. Fails at the stage Starting the Java stack/SAPJSF creation stage. This is due to the kernel issue as the latest kernel is not bundled as a part of the DVD.
You are opt for 2 options
1. Stop the installation and the Bring down the system via MMC/cmd. backup the kernel and upgrade the Kernel with the latest Kernel available in the market place and then start the SAPINST. This would go ahead fine and the system would come up.
This is valid for the Dual stack and Java only system. In As ABAP the system get installed but the system would give dumps as soon as we log in so the Kernel upgrade needs to be done to proceed with the rest of the post steps.
2. Follow the snote: Note 1480785 - Creating a Modified Windows Kernel DVD for not getting bothered with these errors while installations.
Hope this helps -- Further more SAP would be coming out with the new DVD's/Support for Windows 2008 R2 pretty soon.
Thanks,
Lijin Xavier

Oralce EPM Fails to install Weblogic on Windows Server 2008 R2 x64

I've run the installer on Windows Server 2008 R2 x64 and it fails to install Weblogic. I don't have MIDDLEWARE_HOME/oracle_common. Config tool log says missing jars. When I go back to install and choose products individually, Weblogic Server is gray. When I click on Weblogic Server, the message at the bottom says can not be installed.
I have checked that I have extracted the following assemblies:
Oracle Hyperion Enterprise Performance Management System Installer, Fusion Edition Release 11.1.2.0.0
Hyperion Enterprise Performance Management System Foundation Services Release 11.1.2.0.0 - Parts 1 - 4
Oracle Hyperion Enterprise Performance Management System Additional Content Release 11.1.2.0.0
I have run this same set of files on another server and Weblogic was installed. Am I missing something?

I am not sure if it is your problem but I don't think R2 is officially supported, I did have problems with it when I first installed 11.1.2 so I installed with R1 SP2.
Cheers
John
http://john-goodwin.blogspot.com/

Installing Flash Player 12 on Windows Server 2008 R2 X64 with IE 8

I have an app that runs on Windows Server 2008 R2 X64 that requires Flash Player 12. When I try to install Flash Player 12 it says that Windows Server R2 X64 is not supported by way of eliminating it from the list of supported operating systems. When I do a search I can find many people who indicate they have it running or explain "hacks" to get it running. Since the app requires it there is an implimcation that it should be running on this OS. What is the offical word on this? This is a production server and I really don't want an "unsupported hack" running in this environment. Is there a supported means of having Flash Player 12 run on Windows Server 2008 R2 X64 with IE8 even if it is within the 32 bit version of the browser?

Server 2008 (x86) is supported, and I had an x64 machine set up last month that had FP12 installed and running in IE and Firefox. 64 bit IE wouldn't run it for some reason, but the 32 bit did. It installed in C/Windows/System32/Macromed/Flash and C/Windows/SysWOW64/Macromed/Flash, but I was unable to get the ActiveX plug-in to enable outside of 32 bit IE.
I also set up a Server 2012 machine that DID support the x64 ActiveX, but that's probably not an option for you.
Like you, I'd be leery of "hacks" to get it to run as an x64 pkug-in, as it may have unintended and undesired consequences in other areas.

Whats needed to install 10G 32 bit on Windows server 2008 R2 x64

Hello,
I cannot use 11g with what I need to use on the server.
I have installed 10.2.0.3.0 32 bit on the server 2008 R2 x64. It is not working and i get a page not found error when i browse to our application. I know i need to install a patchset or something newer than 10.2.0.3.0. How do i install the 32 bit 10.2.0.4.0 patchset on my server? Is there a different patchset i need to install? When i tried to install the patchset, it said:
Checking installer requirements...
Checking operating system version: must be 5.0, 5.1, 5.2 or 6.0. Actual 6.1
Failed
What do I need to do to get 10g 32 bit to work on my server 2008 R2 x64 server?
Thanks!

Replying for your patchset installation pre-req error:
Use below command:
./runInstaller -ignoreSysPrereqs
Review MOS note 763143.1 for more info.

Problem on KB2562485 security update on server 2008 SP2 X64

Dears
from some day ego I Scanned one of my servers Widows server 2008 SP2 X64 with Nessus vulnerability scanner.
after scan Server have a Critical problem was about KB2562485 security update ( Vulnerabilities in DNS Server Could Allow Remote Code Execution (2562485)) . I have checked This update on installed update which I see this update already exist.
Also I try to installing this update manually "Windows6.0-KB2562485-x64" that error come "The update does not apply to your system"
Have you ever see this issue? while you see the update already installed but vulnerability software such as Nessus face you have a critical problem for this update?
This is server problem or Nessus?
Many thanks for you support
BR
Anoosh

I have checked This update on installed update which I see this update already exist.
This is server problem or Nessus?
Anytime I've ever seen disparities between the results of third-party scanners and WSUS, in every case, the third-party scanner was reporting false-positives -- usually as a result of using outdated scanning data.
As pertains to KB2562485, which is a part of MS11-058... knowing the vintage of updates can be a very useful clue... what do you suppose the odds are that you've got a server that's gone unpatched for over two years? Furthermore, MS11-068
was superseded by MS12-017 (KB2647170), which was released in March, 2012.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Authentication Error while Sending Email from SMTP server.

Authentication Error while Sending Email from SMTP server. Can receive emails but cannot send emails from this account.

no email account was setup on the phone unless it was issued by your company.
gmail is required but no server address ports to enter.
my gmail account was setup before i took delivery of the phone but could have been done when phone was activated.
i added cox pop3 email and had to manually enter both pop3 and smtp servers with both boxes checked on both servers.
i doubt if it's a verizon issue.

I installed visual studio 2010 in my windows 8.1 system.during the installation sql server 2008 r2 features were installed.so which version of sql server i need to install(2008 or 2008 r2)?

hi,
I installed visual studio 2010 in my windows 8.1 system.during the installation sql server 2008 r2 features were installed.so which version of sql server i need to install(2008 or 2008 r2)?
regards,
harsha.

My guess is SQL Server 2008 R2.
Check the following KB article for details:
http://support.microsoft.com/kb/2681562
Kalman Toth Database & OLAP Architect
SELECT Video Tutorials 4 Hours
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

An error occurred while trying to access the server

an error occurred while trying to access the server, I keep getting this message when trying to convert, what is the problem, windows 7 user

Hi williaml,
It sounds like you may be trying to access one of the Adobe Document Cloud services from within Adobe Reader. If so, please log out and then log back in.
If you're still having trouble, please try logging in via the web interface at https://cloud.acrobat.com.
Let us know how it goes!
Best,
Sara

Error Code 0x80070035 shows when I try to Access Windows XP machine from Windows8/Windows7

Error Code 0x80070035 shows when I try to Access Windows XP machine from Windows8/Windows7. in my PC i m installed windows8 and used primary and secondary IP. Primary is used for Access my Domain/Internet and secondary IP is used for access my VPN and
there is no internet on VPN. VPN is only used for my Head Office Appication. After i give secondary IP to my windos8/windos7 PC the Active network status changed to private network and not able to acces windows XP machines. Please Advice...

Hi,
This error means that the Network path was not found. Was Windows XP locating in the same network as the secondary IP on Windows 8/7?
Please try the solution below. Use the IP address of the target computer, not the computer name.
1) Find out what the target computer's IP address is. It is desirable to give the target computer a static private IP address, for example, 192.168.1.10, so it does not change. Use the local windows help when sitting in front of the target computer
to do this if you don't know how.
2) When sitting in front of the Windows 7 computer you want to access the target computer from, open Windows Explorer and in the address bar type \\ followed by the target computer's static address, for example,\\192.168.1.10 and hit enter.
If the target computer uses username/password sharing, after a few seconds you will be prompted for credentials. Enter the same username and password employed to log on to the target computer when you are sitting in front of it.
The target computer will be added to the Windows 7 computer's Network list, appearing as an IP address instead of a computer name. Then you can access its shares just as if it were listed by name instead of by number.
Kate Li
TechNet Community Support

Windows 8.1 shuts down itunes when I try to access the itunes store.

Windows 8.1 shuts down itunes when I try to access the itunes store.

This will fix it. It's from another conversation. Sony Singh posted this.
Copy QTMovieWin.dll from: C:\Program Files (x86)\Common Files\Apple\Apple Application Support
to: C:\Program Files (x86)\iTunes
If you need help, let me know.

EPM 11.1.2.1 Installation problem on Laptop (Windows Server 2008 R2 x64)

Dear All,
I hope someone can help me here with EPM 11.1.2.1 installation problem on my notebook - Windows Server 2008 R2 x65, 8 GB RAM, running SQLServer 2008 Express.
I installed Hyperion Foundation. The installation and configuration went through successfully.
I am facing two problems:
Problem 1
When I try to access the workspace through the URL http://hostname:19000/workspace/index.jsp, I get error:
Quote
Failure of server APACHE bridge:
No backend server available for connection: timed out after 10 seconds or idempotent set to OFF.
End-quote
Problem 2
Also, the service "Hyperion EPM Server" service not able to start. When I try to start, I get error message:
Quote
The Hyperion EPMA Server service on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.
End-quote
I tried checking everything but can't seem to figure out what's going wrong.
I have uploaded (1) EPM Config Manager screenshot (2) EPM System diagnostic report (3) EPM Registry editor output and (4) system services listing at
http://www.mediafire.com/?pr9l1v99w4d9u4r,c3vggxeibqkxbo2,lyzclu2aggbn8qh,8kur9gxal5b361z
It would be very grateful if someone can have a look and help me.
Many thanks in advance for any help / pointers / suggestions.
- Neil

Hi Pablo,
Thanks to your suggestion for database, problem #2 seem to be resolved. I am now able to start EPMA Service.
Re: Problem 1
a) Log for C:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\services\HyS9FoundationServices-sysout is as below
-----<start>--------
<Feb 15, 2012 4:04:47 AM > <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Feb 15, 2012 4:04:47 AM > <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Feb 15, 2012 4:04:47 AM > <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.2-11-135406-1.6.0_20-20100624-2119-windows-x86_64 from Oracle Corporation>
<Feb 15, 2012 4:04:48 AM > <Info> <Security> <BEA-090065> <Getting boot identity from user.>
Enter username to boot WebLogic server:
------<end>-----
I am intrigued by the last line "Enter username to boot WebLogic server:" - is there anything wrong going here?
Log for C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\logs\FoundationServices0 is as below:
-----<start>--------
####<Feb 15, 2012 12:49:49 AM <Info> <WebLogicServer> <RCPL02> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1329324589459> <BEA-000000> <WebLogic Server "FoundationServices0" version:
WebLogic Server 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255 Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.>
####<Feb 15, 2012 12:49:49 AM <Notice> <Log Management> <RCPL02> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1329324589568> <BEA-170019> <The server log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\logs\FoundationServices0.log is opened. All server side log events will be written to this file.>
####<Feb 15, 2012 12:49:49 AM <Info> <Log Management> <RCPL02> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1329324589584> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
####<Feb 15, 2012 12:49:49 AM <Info> <Diagnostics> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324589631> <BEA-320001> <The ServerDebug service initialized successfully.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "t3" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "t3s" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "http" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "https" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "iiop" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "iiops" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "ldap" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "ldaps" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "cluster" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002622> <The protocol "clusters" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002622> <The protocol "snmp" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002622> <The protocol "admin" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <RJVM> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594950> <BEA-000570> <Network Configuration for Channel "FoundationServices0"
Listen Address          :28080
Public Address          N/A
Http Enabled          true
Tunneling Enabled     false
Outbound Enabled     false
Admin Traffic Enabled     true>
####<Feb 15, 2012 12:49:54 AM <Info> <RJVM> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594950> <BEA-000570> <Network Configuration for Channel "FoundationServices0"
Listen Address          :28443 (SSL)
Public Address          N/A
Http Enabled          true
Tunneling Enabled     false
Outbound Enabled     false
Admin Traffic Enabled     true>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594982> <BEA-002609> <Channel Service initialized.>
####<Feb 15, 2012 12:49:55 AM <Info> <Socket> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595013> <BEA-000406> <NTSocketMuxer was built on Jan 24 2006 20:40:35
>
####<Feb 15, 2012 12:49:55 AM <Info> <Socket> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595075> <BEA-000436> <Allocating 4 reader threads.>
####<Feb 15, 2012 12:49:55 AM <Info> <Socket> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595075> <BEA-000446> <Native IO Enabled.>
####<Feb 15, 2012 12:49:55 AM <Info> <IIOP> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595216> <BEA-002014> <IIOP subsystem enabled.>
####<Feb 15, 2012 12:49:59 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324599818> <BEA-090894> <Successfully loaded the OPSS Policy Provider using oracle.security.jps.internal.policystore.JavaPolicyProvider.>
####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600286> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600442> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_9V5rIdcvntKDauQNwFIW41HchnU=>
####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600722> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\data\ldap\XACMLAuthorizermyrealmInit.initialized, will load full LDIFT.>
####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600738> <BEA-090074> <Initializing Authorizer provider using LDIF template file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\XACMLAuthorizerInit.ldift.>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601050> <BEA-090075> <The Authorizer provider has had its LDIF information loaded from: C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\XACMLAuthorizerInit.ldift>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601315> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\data\ldap\DefaultCredentialMappermyrealmInit.initialized, will load full LDIFT.>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601315> <BEA-090827> <LDIF template file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DefaultCredentialMapperInit.ldift was empty. The WebLogic provider CredentialMapper has been bootstrapped but has not been initialized with any LDIF data.>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601331> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\data\ldap\XACMLRoleMappermyrealmInit.initialized, will load full LDIFT.>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601331> <BEA-090074> <Initializing RoleMapper provider using LDIF template file C:\Oracle\Middleware\user_projects\domains\EPMSystem\security\XACMLRoleMapperInit.ldift.>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601346> <BEA-090075> <The RoleMapper provider has had its LDIF information loaded from: C:\Oracle\Middleware\user_projects\domains\EPMSystem\security\XACMLRoleMapperInit.ldift>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601565> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server FoundationServices0 for security realm myrealm.>
####<Feb 15, 2012 12:50:01 AM <Notice> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601565> <BEA-090082> <Security initializing using security realm myrealm.>
####<Feb 15, 2012 12:50:01 AM <Notice> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601658> <BEA-090083> <Storing boot identity in the file: C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\security\boot.properties>
------<end>-----

Windows server 2008 R2 x64 Authentication failure while try to access Windows server 2003 R2

Similar Messages

Maybe you are looking for