Windows Server 2008 R2 - You might not have permission to use this network resource. The request is not supported.

Hello !
I have a server with Windows Server 2008 R2 (AD, File Server, DNS Server and DHCP Server) that not access network share other Domain Controller.
Well, is very crazy.
I view network shares by network computers and devices,
but not \\domain_controller or \\IP_domain_controller.
I execute ping for succeed for all servers.
Follow error bellow:

irectory Server Diagnosis
Performing initial setup:
   Trying to find home server...
   * Verifying that the local machine SRVMTZDC01, is a Directory Server. 
   Home Server = SRVMTZDC01
   * Connecting to directory service on server SRVMTZDC01.
   * Identified AD Forest. 
   Collecting AD specific global data 
   * Collecting site info.
   Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=shcorp,DC=local,LDAP_SCOPE_SUBTREE,(objectCategory=ntDSSiteSettings),.......
   The previous call succeeded 
   Iterating through the sites 
   Looking at base site object: CN=NTDS Site Settings,CN=SAO,CN=Sites,CN=Configuration,DC=shcorp,DC=local
   Getting ISTG and options for the site
   Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
   Getting ISTG and options for the site
   Looking at base site object: CN=NTDS Site Settings,CN=CWB,CN=Sites,CN=Configuration,DC=shcorp,DC=local
   Getting ISTG and options for the site
   Looking at base site object: CN=NTDS Site Settings,CN=POA,CN=Sites,CN=Configuration,DC=shcorp,DC=local
   Getting ISTG and options for the site
   Looking at base site object: CN=NTDS Site Settings,CN=RIO,CN=Sites,CN=Configuration,DC=shcorp,DC=local
   Getting ISTG and options for the site
   Looking at base site object: CN=NTDS Site Settings,CN=VIX,CN=Sites,CN=Configuration,DC=shcorp,DC=local
   Getting ISTG and options for the site
   Looking at base site object: CN=NTDS Site Settings,CN=SSA,CN=Sites,CN=Configuration,DC=shcorp,DC=local
   Getting ISTG and options for the site
   Looking at base site object: CN=NTDS Site Settings,CN=FOR,CN=Sites,CN=Configuration,DC=shcorp,DC=local
   Getting ISTG and options for the site
   Looking at base site object: CN=NTDS Site Settings,CN=BHZ,CN=Sites,CN=Configuration,DC=shcorp,DC=local
   Getting ISTG and options for the site
   Looking at base site object: CN=NTDS Site Settings,CN=BSB,CN=Sites,CN=Configuration,DC=shcorp,DC=local
   Getting ISTG and options for the site
   Looking at base site object: CN=NTDS Site Settings,CN=RCF,CN=Sites,CN=Configuration,DC=shcorp,DC=local
   Getting ISTG and options for the site
   Looking at base site object: CN=NTDS Site Settings,CN=BEL,CN=Sites,CN=Configuration,DC=shcorp,DC=local
   Getting ISTG and options for the site
   * Identifying all servers.
   Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=shcorp,DC=local,LDAP_SCOPE_SUBTREE,(objectClass=ntDSDsa),.......
   The previous call succeeded....
   The previous call succeeded
   Iterating through the list of servers 
   Getting information for the server CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local 
   objectGuid obtained
   InvocationID obtained
   dnsHostname obtained
   site info obtained
   All the info for the server collected
   Getting information for the server CN=NTDS Settings,CN=SRVDC05,CN=Servers,CN=SAO,CN=Sites,CN=Configuration,DC=shcorp,DC=local 
   objectGuid obtained
   InvocationID obtained
   dnsHostname obtained
   site info obtained
   All the info for the server collected
   Getting information for the server CN=NTDS Settings,CN=SRVDC06,CN=Servers,CN=CWB,CN=Sites,CN=Configuration,DC=shcorp,DC=local 
   objectGuid obtained
   InvocationID obtained
   dnsHostname obtained
   site info obtained
   All the info for the server collected
   Getting information for the server CN=NTDS Settings,CN=SRVDC13,CN=Servers,CN=POA,CN=Sites,CN=Configuration,DC=shcorp,DC=local 
   objectGuid obtained
   InvocationID obtained
   dnsHostname obtained
   site info obtained
   All the info for the server collected
   Getting information for the server CN=NTDS Settings,CN=SRVDC07,CN=Servers,CN=RIO,CN=Sites,CN=Configuration,DC=shcorp,DC=local 
   objectGuid obtained
   InvocationID obtained
   dnsHostname obtained
   site info obtained
   All the info for the server collected
   Getting information for the server CN=NTDS Settings,CN=SRVDC08,CN=Servers,CN=VIX,CN=Sites,CN=Configuration,DC=shcorp,DC=local 
   objectGuid obtained
   InvocationID obtained
   dnsHostname obtained
   site info obtained
   All the info for the server collected
   Getting information for the server CN=NTDS Settings,CN=SRVDC09,CN=Servers,CN=SSA,CN=Sites,CN=Configuration,DC=shcorp,DC=local 
   objectGuid obtained
   InvocationID obtained
   dnsHostname obtained
   site info obtained
   All the info for the server collected
   Getting information for the server CN=NTDS Settings,CN=SRVDC12,CN=Servers,CN=FOR,CN=Sites,CN=Configuration,DC=shcorp,DC=local 
   objectGuid obtained
   InvocationID obtained
   dnsHostname obtained
   site info obtained
   All the info for the server collected
   Getting information for the server CN=NTDS Settings,CN=SRVDC04,CN=Servers,CN=BHZ,CN=Sites,CN=Configuration,DC=shcorp,DC=local 
   objectGuid obtained
   InvocationID obtained
   dnsHostname obtained
   site info obtained
   All the info for the server collected
   Getting information for the server CN=NTDS Settings,CN=SRVDC10,CN=Servers,CN=BSB,CN=Sites,CN=Configuration,DC=shcorp,DC=local 
   objectGuid obtained
   InvocationID obtained
   dnsHostname obtained
   site info obtained
   All the info for the server collected
   Getting information for the server CN=NTDS Settings,CN=SRVMTZDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local 
   objectGuid obtained
   InvocationID obtained
   dnsHostname obtained
   site info obtained
   All the info for the server collected
   Getting information for the server CN=NTDS Settings,CN=SRVRCFDC11,CN=Servers,CN=RCF,CN=Sites,CN=Configuration,DC=shcorp,DC=local 
   objectGuid obtained
   InvocationID obtained
   dnsHostname obtained
   site info obtained
   All the info for the server collected
   * Identifying all NC cross-refs.
   * Found 12 DC(s). Testing 1 of them.
   Done gathering initial info.
Doing initial required tests
   Testing server: Default-First-Site-Name\SRVMTZDC01
      Starting test: Connectivity
         * Active Directory LDAP Services Check
         Determining IP4 connectivity 
         * Active Directory RPC Services Check
         ......................... SRVMTZDC01 passed test Connectivity
Doing primary tests
   Testing server: Default-First-Site-Name\SRVMTZDC01
      Starting test: Advertising
         The DC SRVMTZDC01 is advertising itself as a DC and having a DS.
         The DC SRVMTZDC01 is advertising as an LDAP server
         The DC SRVMTZDC01 is advertising as having a writeable directory
         The DC SRVMTZDC01 is advertising as a Key Distribution Center
         Warning: SRVMTZDC01 is not advertising as a time server.
         The DS SRVMTZDC01 is advertising as a GC.
         ......................... SRVMTZDC01 failed test Advertising
      Test omitted by user request: CheckSecurityError
      Test omitted by user request: CutoffServers
      Starting test: FrsEvent
         * The File Replication Service Event log test 
         ......................... SRVMTZDC01 passed test FrsEvent
      Starting test: DFSREvent
         The DFS Replication Event Log. 
         Skip the test because the server is running FRS.
         ......................... SRVMTZDC01 passed test DFSREvent
      Starting test: SysVolCheck
         * The File Replication Service SYSVOL ready test 
         File Replication Service's SYSVOL is ready 
         ......................... SRVMTZDC01 passed test SysVolCheck
      Starting test: KccEvent
         * The KCC Event log test
         Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
         ......................... SRVMTZDC01 passed test KccEvent
      Starting test: KnowsOfRoleHolders
         Role Schema Owner = CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
         Role Domain Owner = CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
         Role PDC Owner = CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
         Role Rid Owner = CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
         Role Infrastructure Update Owner = CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
         ......................... SRVMTZDC01 passed test KnowsOfRoleHolders
      Starting test: MachineAccount
         Checking machine account for DC SRVMTZDC01 on DC SRVMTZDC01.
         * SPN found :LDAP/SRVMTZDC01.shcorp.local/shcorp.local
         * SPN found :LDAP/SRVMTZDC01.shcorp.local
         * SPN found :LDAP/SRVMTZDC01
         * SPN found :LDAP/SRVMTZDC01.shcorp.local/SHCORP
         * SPN found :LDAP/9956d321-332f-482c-855c-8bceee885bb6._msdcs.shcorp.local
         * SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/9956d321-332f-482c-855c-8bceee885bb6/shcorp.local
         * SPN found :HOST/SRVMTZDC01.shcorp.local/shcorp.local
         * SPN found :HOST/SRVMTZDC01.shcorp.local
         * SPN found :HOST/SRVMTZDC01
         * SPN found :HOST/SRVMTZDC01.shcorp.local/SHCORP
         * SPN found :GC/SRVMTZDC01.shcorp.local/shcorp.local
         ......................... SRVMTZDC01 passed test MachineAccount
      Starting test: NCSecDesc
         * Security Permissions check for all NC's on DC SRVMTZDC01.
         * Security Permissions Check for
           DC=ForestDnsZones,DC=shcorp,DC=local
            (NDNC,Version 3)
         * Security Permissions Check for
           DC=DomainDnsZones,DC=shcorp,DC=local
            (NDNC,Version 3)
         * Security Permissions Check for
           CN=Schema,CN=Configuration,DC=shcorp,DC=local
            (Schema,Version 3)
         * Security Permissions Check for
           CN=Configuration,DC=shcorp,DC=local
            (Configuration,Version 3)
         * Security Permissions Check for
           DC=shcorp,DC=local
            (Domain,Version 3)
         ......................... SRVMTZDC01 passed test NCSecDesc
      Starting test: NetLogons
         * Network Logons Privileges Check
         Verified share \\SRVMTZDC01\netlogon
         Verified share \\SRVMTZDC01\sysvol
         ......................... SRVMTZDC01 passed test NetLogons
      Starting test: ObjectsReplicated
         SRVMTZDC01 is in domain DC=shcorp,DC=local
         Checking for CN=SRVMTZDC01,OU=Domain Controllers,DC=shcorp,DC=local in domain DC=shcorp,DC=local on 1 servers
            Object is up-to-date on all servers.
         Checking for CN=NTDS Settings,CN=SRVMTZDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local in domain CN=Configuration,DC=shcorp,DC=local on 1 servers
            Object is up-to-date on all servers.
         ......................... SRVMTZDC01 passed test ObjectsReplicated
      Test omitted by user request: OutboundSecureChannels
      Starting test: Replications
         * Replications Check
         * Replication Latency Check
            DC=ForestDnsZones,DC=shcorp,DC=local
               Latency information for 7 entries in the vector were ignored.
                  7 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency information (Win2K DC).  
            DC=DomainDnsZones,DC=shcorp,DC=local
               Latency information for 7 entries in the vector were ignored.
                  7 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency information (Win2K DC).  
            CN=Schema,CN=Configuration,DC=shcorp,DC=local
               Latency information for 7 entries in the vector were ignored.
                  7 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency information (Win2K DC).  
            CN=Configuration,DC=shcorp,DC=local
               Latency information for 7 entries in the vector were ignored.
                  7 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency information (Win2K DC).  
            DC=shcorp,DC=local
               Latency information for 7 entries in the vector were ignored.
                  7 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency information (Win2K DC).  
         ......................... SRVMTZDC01 passed test Replications
      Starting test: RidManager
         * Available RID Pool for the Domain is 14100 to 1073741823
         * SRVDC01.shcorp.local is the RID Master
         * DsBind with RID Master was successful
         * rIDAllocationPool is 11600 to 12099
         * rIDPreviousAllocationPool is 11600 to 12099
         * rIDNextRID: 11737
         ......................... SRVMTZDC01 passed test RidManager
      Starting test: Services
         * Checking Service: EventSystem
         * Checking Service: RpcSs
         * Checking Service: NTDS
         * Checking Service: DnsCache
         * Checking Service: NtFrs
         * Checking Service: IsmServ
         * Checking Service: kdc
         * Checking Service: SamSs
         * Checking Service: LanmanServer
         * Checking Service: LanmanWorkstation
         * Checking Service: w32time
         * Checking Service: NETLOGON
         ......................... SRVMTZDC01 passed test Services
      Starting test: SystemLog
         * The System Event log test
         An error event occurred.  EventID: 0x00000422
            Time Generated: 05/02/2014   12:55:01
            Event String:
            The processing of Group Policy failed. Windows attempted to read the file \\shcorp.local\SysVol\shcorp.local\Policies\{1A69D491-B88A-4F66-B294-4ABEC8C62886}\gpt.ini from a domain controller and was not successful. Group
Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following: 
            a) Name Resolution/Network Connectivity to the current domain controller. 
            b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller). 
            c) The Distributed File System (DFS) client has been disabled.
         An error event occurred.  EventID: 0x00000422
            Time Generated: 05/02/2014   13:11:54
            Event String:
            The processing of Group Policy failed. Windows attempted to read the file \\shcorp.local\SysVol\shcorp.local\Policies\{1A69D491-B88A-4F66-B294-4ABEC8C62886}\gpt.ini from a domain controller and was not successful. Group
Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following: 
            a) Name Resolution/Network Connectivity to the current domain controller. 
            b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller). 
            c) The Distributed File System (DFS) client has been disabled.
         A warning event occurred.  EventID: 0x80001083
            Time Generated: 05/02/2014   13:18:00
            Event String:
            TCP/IP failed to establish an outgoing connection because the selected local endpoint was recently used to connect to the same remote endpoint. This error typically occurs when outgoing connections are opened and closed
at a high rate, causing all available local ports to be used and forcing TCP/IP to reuse a local port for an outgoing connection. To minimize the risk of data corruption, the TCP/IP standard requires a minimum time period to elapse between successive connections
from a given local endpoint to a given remote endpoint.
         An error event occurred.  EventID: 0xC0002719
            Time Generated: 05/02/2014   13:20:41
            Event String:
            DCOM was unable to communicate with the computer 8.8.4.4 using any of the configured protocols.
         An error event occurred.  EventID: 0xC0002719
            Time Generated: 05/02/2014   13:21:03
            Event String:
            DCOM was unable to communicate with the computer 8.8.8.8 using any of the configured protocols.
         ......................... SRVMTZDC01 failed test SystemLog
      Test omitted by user request: Topology
      Test omitted by user request: VerifyEnterpriseReferences
      Starting test: VerifyReferences
         The system object reference (serverReference)
         CN=SRVMTZDC01,OU=Domain Controllers,DC=shcorp,DC=local and backlink on
         CN=SRVMTZDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
          are correct. 
         The system object reference (serverReferenceBL)
         CN=SRVMTZDC01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=shcorp,DC=local
         and backlink on
         CN=NTDS Settings,CN=SRVMTZDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
         are correct. 
         The system object reference (frsComputerReferenceBL)
         CN=SRVMTZDC01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=shcorp,DC=local
         and backlink on CN=SRVMTZDC01,OU=Domain Controllers,DC=shcorp,DC=local
         are correct. 
         ......................... SRVMTZDC01 passed test VerifyReferences
      Test omitted by user request: VerifyReplicas
      Test omitted by user request: DNS
      Test omitted by user request: DNS
   Running partition tests on : ForestDnsZones
      Starting test: CheckSDRefDom
         ......................... ForestDnsZones passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... ForestDnsZones passed test
         CrossRefValidation
   Running partition tests on : DomainDnsZones
      Starting test: CheckSDRefDom
         ......................... DomainDnsZones passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... DomainDnsZones passed test
         CrossRefValidation
   Running partition tests on : Schema
      Starting test: CheckSDRefDom
         ......................... Schema passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... Schema passed test CrossRefValidation
   Running partition tests on : Configuration
      Starting test: CheckSDRefDom
         ......................... Configuration passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... Configuration passed test CrossRefValidation
   Running partition tests on : shcorp
      Starting test: CheckSDRefDom
         ......................... shcorp passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... shcorp passed test CrossRefValidation
   Running enterprise tests on : shcorp.local
      Test omitted by user request: DNS
      Test omitted by user request: DNS
      Starting test: LocatorCheck
         GC Name: \\SRVMTZDC01.shcorp.local
         Locator Flags: 0xe00031bc
         PDC Name: \\SRVDC01.shcorp.local
         Locator Flags: 0xe00033fd
         Time Server Name: \\SRVDC01.shcorp.local
         Locator Flags: 0xe00033fd
         Preferred Time Server Name: \\SRVDC01.shcorp.local
         Locator Flags: 0xe00033fd
         KDC Name: \\SRVMTZDC01.shcorp.local
         Locator Flags: 0xe00031bc
         ......................... shcorp.local passed test LocatorCheck
      Starting test: Intersite
         Skipping site SAO, this site is outside the scope provided by the
         command line arguments provided. 
         Skipping site Default-First-Site-Name, this site is outside the scope
         provided by the command line arguments provided. 
         Skipping site CWB, this site is outside the scope provided by the
         command line arguments provided. 
         Skipping site POA, this site is outside the scope provided by the
         command line arguments provided. 
         Skipping site RIO, this site is outside the scope provided by the
         command line arguments provided. 
         Skipping site VIX, this site is outside the scope provided by the
         command line arguments provided. 
         Skipping site SSA, this site is outside the scope provided by the
         command line arguments provided. 
         Skipping site FOR, this site is outside the scope provided by the
         command line arguments provided. 
         Skipping site BHZ, this site is outside the scope provided by the
         command line arguments provided. 
         Skipping site BSB, this site is outside the scope provided by the
         command line arguments provided. 
         Skipping site RCF, this site is outside the scope provided by the
         command line arguments provided. 
         Skipping site BEL, this site is outside the scope provided by the
         command line arguments provided. 
         ......................... shcorp.local passed test Intersite

Similar Messages

  • When accessing shared folder - 'You might not have permission to use this network resource" .. A device attached to the system is not functioning

    On a Windows 2008 R2 server that had been working fine, all of a sudden some shared folders became inaccessible.  Clicking on them returned the following: "<Folder> is not accessible.  You might not have permission to use this network
    resource.  A device attached to the system is not functioning."
    If I create another share with a different name for that same folder, it works fine.  If I delete the original share then recreate it with the same name, I get the same error.  However, if I right click on the problematic share and select 'map
    network drive' that works.  So this would not appear to be a permission issue.
    I discovered this problem because the path for mapping the home folder as a property of their AD account stopped working.
    I have tried most of the common things found on the internet.  I've tried accessing via IP, same issue.  While I only have a couple 2003 servers, those can access this resource.
    At this point, I'm pretty much out of ideas.  Any help would be appreciated.  I also have some reports of potential issues with some printer mappings too which I will have to investigate in the morning.
    If anyone has a solution to this I would be extremely grateful.  Thank you.

    Hi,
    Can you access the shard folder locally? Is a specific server cannot access the shared folder? Please try to Boot your server in Clean Mode to check if some third-party software cause the issue.
    How to perform a clean boot in Windows
    http://support.microsoft.com/kb/929135
    Best Regards,
    Mandy
    If you have any feedback on our support, please click
    here .
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • "The Loged On user does not have permission to use this object" error

    Hi
    I've created a form that is used by a customer which allows for certain draft documents to be approved and then once approved they are created. The problem that I am having is that when the users attempt to update the changes on the form an error is logged, which is shown below:
    "Error: -3000
    The Loged On user does not have permission to use this object
    System.Runtime.InteropServices.COMException (0xFFFFF448): The Loged On user does not have permission to use this object"
    Once the update button is pressed then a User Defined Table and Drafts are both updated with the relevant modified UDFs from the form.
    If I log onto their system then I don't seem to get any issues. To me it looks like a user authorisation problem but the ones who have used the form seem to have the relevant licences.
    Do you have any idea why this error could be occuring?
    Thanks a lot.
    Steve

    Hi,
    Go to Administration --> System Initlization > Authorizations> General Authorizations not expand all and check if the service call is given full *Read & Write * rights to the required user.
    If not then give full rights and check the add on.
    Hope it helps,
    Vasu Natari.

  • Windows server 2008 r2 operating system not booting in normal mode after unstalled the virus gaurd

     Windows server 2008 r2 operating system is not booting in normal mode after i uninstalled the virus guard in the system. I tried to repair the system but repairing  option not available in server 2008. i can log in to the system only safe mode.
    Please help me to solve this issue as soon as possible .I do not have the any system backup with me .

    Hi,
    Regarding the issue here, please restart the computer and press F8 until you see the
    advanced boot options, select start windows normally, 
    if it starts with no problem, please check if you have the option boot from safe mode checked:
    run->type msconfig->tab boot->boot options, check if the
    safe boot is selected, if yes please uncheck it. Then restart the computer to check if this problem still exists.
    If the system needs repair, please take a look into the below WIKI article, and check the event viewer to see if any errors for further troubleshooting.:
    Windows Server 2008 Repair Steps for No Boot Issues
    http://social.technet.microsoft.com/wiki/contents/articles/4162.windows-server-2008-repair-steps-for-no-boot-issues.aspx
    Hope this helps
    Best regards
    Michael
    If you have any feedback on our support, please click
    here.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • "SQL Server 2008 Reporting Services does not support map report items"

    Hi,
    I am trying some new feature that are introduced in SQL Server 2008 R2 version. While I try to use "Map" control within it, it threw the following error:-
    "Error 1 The map, Map1, was removed from the report. SQL Server 2008 Reporting Services does not support map report items. "
    -Also, similar kind of error I am getting for "Indicator" control.

    Hi Tej,
    I think you get this error message when you are deploying a report to report server using BIDS, correct?  If not, please provide more details on your scenario :-)
    If I guessed correctly, then this message is a result of trying to deploy a map report (a SSRS 2008 R2 feature) to a non-R2 2008 report server.  When deploying a report of RDL2010 format to a non-R2 report server, BIDS will downgrade the file to RDL2008 format, so that the non-R2 report server can process it.  Any report elements using features not supported in RDL2008 will be dropped during this downgrade process.
    BIDS gets the server version from a report project property called TargetServerVersion:
    http://technet.microsoft.com/en-us/library/ee635898(SQL.105).aspx
    If your report server is indeed the 2008 R2 version, then the TargetServerVersion property should be set to "SQL Server 2008 R2 Reporting Services."  The project property page also has a "Auto Detect..." option if you are uncertain about the version of your report server.
    Hope this helps!
    Cheers,
    LawrenceThis posting is provided "AS IS" with no warranties, and confers no rights.

  • HT2506 Hello I'm unable to open any pdf's with preview window opens up with message file couldn't be opened because you don't have permission to view it (none of the pdf's have any security thanks if you can assist

    Hello this week I'm unable to open any pdf's with preview, when I select to open a window opens up with message "file couldn't be opened because you don't have permission to view it" none of the pdf's have any security thanks if you can assist

    Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
    Boot into Recovery. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not  going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • Forbidden; You don't have permission to access this document on this server.

    I am trying to request Daily iTunes U log reports and I am getting the following error: Forbidden  You don't have permission to access this document on this server.
    Does any one know what it means? Is Identity necessary?
    The URL I am using look like:
    http://deimos.apple.com/WebObjects/Core.woa/API/GetDailyReportLogs/example.edu?​StartDate=2011-05-01&EndDate=2011-06-01​&credentials=Administrator@urn:mace:itunesu.com:sites:example.edu​&identity=&signature=38bda70d9aa6975ae8756754034feb6e3c794aca4b21665f6dc85d2ed4 2d4f6b

    Check to make sure that the user in question doesn't have something in their Hosts file on their desktop.  Otherwise I don't see why SharePoint or the load balancer should be sending them to an Apache Unix web server when trying to resolve Office
    Web Apps.  Something is misdirecting the http request for that user to the wrong server.  If its just one user then I would suspect that something is wrong with TCP/IP locally.
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • 'The logged-on user does not have permission to use this object'

    Hello everyone,
    I am getting the message 'The logged-on user does not have permission to use this object' while saving the Sales Order. I am logging in as a CRM user. There is an addon also running on the server, that saves some data into a user defined table when the Sales Order is saved. Is there any authoisation for users to access user defined tables.
    Regards,
    William

    hi William,
    this is an Authorization issue. provide the user with authorization on your UDT. Definition of user authorization can be found in Administration -- >> System Initialization -->> Authorizations -->> Additional Authorization Creator.... if already defined from here you can fined the additional authorization from the General authorization window.
    regards,
    Fidel

  • How to resolve "You don't have permission to use the application" errors?

    We've been struggling with managed preferences, specifically applications, for a few users. They have mobile home folders which live on a Mac OS X 10.6.x Snow Leopard Server AFP server, preferences which are managed (by group) on a Mac OS X 10.6.5 Snow Leopard Server Open Directory Master, and the clients are running Mac OS X 10.6.4 Snow Leopard (bound to the Open Directory Master). There are also two Mac OS X 10.6.4 Snow Leopard Server Open Directory Replicas. We always manage applications and DO NOT sign the apps when adding them in Workgroup Manager.
    Essentially, key applications are unable to run due to the "You don't have permission to use the application" errors, even though they're explicitly whitelisted. (See some prior investigation over on Serverfault.) After seeing that the Mac OS X 10.6.5 Server update included the following fixes, we upgraded our Open Directory Master to 10.6.5:
    * Addresses an issue that could prevent managed preferences from being applied when a user logs in on a workstation that has been idle.
    * Fixes an issue that could prevent administrators from bypassing client management settings on a workstation.
    This seemed to improve the situation slightly, our most important application now seems to be allowed. Occasionally, it'll give the same error, but a simple log out & back in allows it again. We have not upgraded the client workstations with the Mac OS X 10.6.5 update as it doesn't note any related fixes and we haven't fully qualified it for mass deployment.
    We now have two applications that live in ~/Applications which are explicitly whitelisted (again, NOT signed), which fail with the same error, but logging out & back in does not resolve it. `sudo mcxrefresh -n 'user'` doesn't resolve the issue. In fact, `sudo /System/Library/CoreServices/ManagedClient.app/Contents/MacOS/ManagedClient -f -u `id -u 'username'`` fails with the following error:
    ManagedClient- bad parameter to -u option: use format '-u 501'
    Today I was able to catch the following in /var/log/system.log while attempting to run one said applications:
    Dec 22 17:36:24 hostname parentalcontrolsd[43221]: -[ActivityTracker checkApp:csFlags:] [954:user] -- * Incoming app appears to be masquerading as white listed app and failed signature validation: /Users/user/Applications/FileMaker Pro 5.5/FileMaker Pro.app/Contents/MacOS/FileMaker Pro. Note: This may be a valid app of a different version than what was whitelisted (on a different volume?)
    Dec 22 17:36:24 hostname [0x0-0xa42a42].com.filemaker.filemakerpro[43304]: launch of /Users/user/Applications/FileMaker Pro 5.5/FileMaker Pro.app/Contents/MacOS/FileMaker Pro was blocked
    Dec 22 17:36:24 hostname com.apple.launchd.peruser.1340[6375] ([0x0-0xa42a42].com.filemaker.filemakerpro[43304]): Exited with exit code: 255
    Dec 22 17:36:24 hostname parentalcontrolsd[43221]: -[ActivityTracker(Private) _removeAppFromWhiteList:] [1362:user] -- * Couldn't find local user record
    So, even though the apps are listed in Workgroup Manager and are unsigned, and also appear in '/Library/Managed Preferences/user/com.apple.applicationaccess.new.plist', it appears that the client somehow thinks they don't match what's in the whitelist even thought WE DON'T SIGN THEM WHEN WE ADD THEM!
    What might be causing this? Any further troubleshooting tips would be GREATLY appreciated!

    According to the [Code Signing Guide|http://developer.apple.com/library/mac/#documentation/Security/Conceptual /CodeSigningGuide/Procedures/Procedures.html#//apple_ref/doc/uid/TP40005929-CH4- SW2], it appears that there is no way to remove signing (emphasis mine):
    "You can take a partial-update approach to revising your code on the user’s system. To do so, sign the new version as usual, then calculate the differences between the new and the old signed versions, and transmit the differences. Because the differences include the new signature data, the result of installing the changes on the end-user's system will be the newly signed version. You cannot patch a signed application in the field. If you do so, the system will notice that the application has changed and will invalidate the signature, +and there is no way to re-validate or resign the application in the field.+"
    Upon further investigation, the version of FileMaker 5.5 in question appears to be signed even after a fresh install from original install media. I wouldn't have thought Code Signing was around back then (2001). And the code signing appears to match between the fresh install (to a new location) and the original install. I'll attempt to sign it in WGM and install the same, signed copy everywhere.
    Also, I looked at one of our other working primary applications (4D.app) and it is unsigned, but appears in the Firewall as "Allow incoming connections", so I don't believe that the Application Firewall is necessarily signing apps automatically (but I certainly won't be ruling it out).
    I haven't checked yet, but the other application that's failing is "Parallels Desktop 6", which I'd bet is signed. I wonder if the "Automatically allow signed software to receive incoming connections", which is checked, would come into play at all?
    Thanks for pointing out how to use `codesign` to check whether an application is signed or not, this seems to be the first real break on this case.

  • You don't have permission to open this file.

    I'm trying to add an Entity Data Model to a Project in Visual Studio 2013.
    When I browse to the file to connect to it says
    "You don't have permission to open this file. Contact the owner or administrator for permission."
    When I go back to SQL Management Studio and check the Server Roles assigned to my user name, I'm listed as a sysadmin.
    I clicked ALL the other server roles for good measure, but this does not help.
    When I installed SQL Server 2012 I created another user on my computer to serve as the SQL Server Services Account for SQL Server Agent and SQL Server Database Engine.
    I notice that this user shows up as the database owner for the database I'm trying to connect to, even though I was logged on using my user name when I created the database.
    Thanks in advance.

    I don't know much about Entity Data Model, but if you get an error about lack of permission for opening a file (what file?), SQL Server is probably not the right place to look for file permissions. SQL Server is about managing data in databases, not
    files in the file system. For file-permission errors, you need to look in Windows. Or try starting Visual Studio with "Run as Administrator".
    Erland Sommarskog, SQL Server MVP, [email protected]

  • Error Message' "The loged on user does not have permission to use this obje

    The loged on user does not have permission to use this object-
    I am entering a Sales order, which is customized, when I add the Sales order this system imformation appears.
    The user has a pro-license and authorizations to all AR
    Can someone tell me what my problem might be?

    Thank you for your help

  • Installed Parental Controls on MBP 10.7.5. Now it's unusable (exc admin's acct).  Constant message pops up- "You don't have permission to use (whatev) app." U can click: ok, always allow, allow once, but no matter what, message continues and u can't work

    Hi,
    I installed Parental Controls on our MacBookPro 10.7.5. Now it's unusable (except for my  admin's acct). Constant messages keep popping up that say  "You don't have permission to use (whatever) application." You have the option to  click: ok, always allow, or allow once, but no matter what you select, the messages keep popping up and prevent you from working.  I have searched these forums, and all I have found is that you are supposed to uninstall the application (Spotify, dashboard, etc). Deinstalling every app is not a solution.
    If the parental controls just don't work - and frankly I'm tired of wasting all this time trying to fix the bugs - can someone recommend a program that will restrict certain user accounts to any websites I haven't specified?
    Thanks for any help or advice.

    Thanks Bob for that very fast reply!
    But neither "Modifying hal configuration" nor "Using the Desktop Environment settings" (xfce) worked. So I tried the "I don't want this crap, how do I turn it off?" solution and well it works
    Maybe I turn it back on in a month or so.. but for now i'm fine with no hot plugging but a working keyboard...
    Thanks and Bye!
    smax
    Last edited by smaxer (2008-12-09 17:42:43)

  • You Don't Have Permission to View This Calendar

    I upgraded from Leopard Server 10.5.8 to 10.6
    My site has individual blogs and a group wiki.
    For some reason, I can't access my individual or group calendars.
    It results in an error message saying I don't have permission to view the calendar.
    I did not see an obvious way to recreate the calendar for myself or my group, or to fix the permissions.
    Has anyone else seen this problem?
    Thanks in advance.

    I have a fresh install of 10.6 running on our internal network. Other computers in the network can find the machine. Wiki and Blogs are up and running, and I can edit them freely once I log in via the web interface.
    Initially, the Web Calendar displayed the error you wrote about above... "You don't have permission to view this calendar".
    After finding this thread, I changed the default IP address in the Wiki Server portion of Server Admin to what I thought was the FQDN (machinename.domain.net), but what I actually did was use ".com" instead of ".net" at the end. Oops.
    After a minute, I found the error and switched .com to .net. I still get the same permissions error, but now if I'm NOT logged in as a user, and I try to access any web page, I get a dialog that reads...
    To view this page, you must log in to area “/Search” on machinename.domain.net:80.
    And none of the logins work. After pressing cancel it reads...
    Unable to access calendar, because the Web service is configured incorrectly.
    I can login through the regular login process, but that strange dialog box above will not let me login. Either way I have yet to see a web calendar working.
    Any help appreciated. Thanks.

  • You don't have permission to use the application "ksfetch"

    When i finished install Google update software, It pop up "You don't have permission to use the application "ksfetch"" many times one day, I closed it, it pop up again.
    The pop up said"You don't have permission to use the application"ksfetch", For more information,contact the person who set up account"
    How can i fix it, does someone know? Thanks very much in advance.

    You may need to rebuild permissions on your user account. To do this,boot to your Recovery partition (holding down the Command and R keys while booting) and open Terminal from the Utilities menu. In Terminal, type:  ‘resetpassword’ (without the ’s), hit return, and select the admin user. You are not going to reset your password. Click on the icon for your Macs hard drive at the top. From the drop down below it select the user account which is having issues. At the bottom of the window, you'll see an area labeled Restore Home Directory Permissions and ACLs. Click the reset button there. The process takes a few minutes. When complete, restart.   
    Repair User Permissions

  • CS4 Admin "You don't have permission to edit this page"

    I am new to Contribute.  Created a website in Dreamweaver CS4, using templates, can put and checkin files, seems fine.  FTP client has full access to all folders.  Site in browser OK, Dreamweaver OK.  Contribute starts and connects OK, access via FTP.  I am the Admin. No lock files.  For some reason Contribute won't let me edit most pages - getting error bar below Address that says "You don't have permission to edit this page".  On some pages the bar is not there, but when I click on Edit Page button a dialog box pops up with the same message.  I tried deleting the _mm folder and recreated the site admin info.  Still no luck.
    Does this sound familiar?  Anyone know how to troubleshoot?  Does Contribute write out debug logs?  Any ideas what to try?  Thanks!

    A bit more info, I hope it helps.  We do not use Contribute Publishing Server.  In Contribute I can create a new page derived from a template and publish it.  If I try to browse to that page again it says I don't have permission to edit the page.  We use FTP to connect.  There is only one FTP account for the website, so it's not an issue of Dreamweaver logging in differently from Contribute.  My standalone FTP client is FileZilla and I cannot view folder or file permissions directly in that program.

Maybe you are looking for

  • How do I transfer music from one PC to another using Home Sharing?

    I've read the article but I'm having some issues. I've set up home sharing on both of my computers, but on both of them, when I click on the home sharing button on the sidebar, it is completely blank. I see no music and I don't see any "Import" butto

  • M7279- Data for creating a delivery is incomplete (Vendor)

    Dear All, i am getting below error while processing Goods receipt. "M7279- Data for creating a delivery is incomplete (Vendor)"  1.I am doing Goods receipt with mvt type 521( GR without ref to prod order). 2.storge location is WH manged + HU managed.

  • Ethernet Connected external drive problem

    I have a 500GB external drive that I connect to the home hub via ethernet. When I connect it to the home hub it does not appear in the connections list for the router and none of the computers can see it. The drive was working fine when it was connec

  • Export specific Excel cells to Access

    Hi, I'm putting together a submission form in excel which will update a database in access. I'm currently trying to use a macro on the submit button to do it but and while i understand the majority of it im not sure how to establish the connection th

  • POKER PLAYER NEEDS HELP! If i buy Parallel do i need to buy Explorer too?

    Hi The only decent way to play poker online is to use sites that require you to download a .exe file (the "live" games i.e. not needing download, don't appear to be very good....). If i buy the Parallel software so i can run windows (i have the MacBo