Windows Server 2008 R8 restarts on RDP

Hello
I got a problem with my windows server 2008R2 datacenter edition.
Every time a remote user shall connect to the server, the server reboots. What causes it to do that?
I have tried to set the server to not starts auto so I get a Blue Screen, I have the minidump on dropbox:
https://www.dropbox.com/sh/pqvkmhpukfgq0e8/rPpdXeV6Wr
I hope you can help me, it just stoped working from one day the other whitout anybody had touch the server :/

This one may help you sort it.
http://blogs.technet.com/b/askcore/archive/2008/11/01/how-to-debug-kernel-mode-blue-screen-crashes-for-beginners.aspx#3476888
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Similar Messages

Windows Server 2008 R2 SP1 RDS hang and stop responding new rdp session. Already connected session also hang as well

We have a Windows Server 2008 R2 SP1 RDS supporting many ThinClients, mostly using a mandatory profile on a Windows 2003 R2 AD environment
at the moment of the hang what we experienced was:
New RDP sessions got stucked in the legend "Iniciando" (we have the spanish MUI).
Systems Events shows a lot of Warnings:
The Group Policy Client Side Extension Group Policy Shortcuts may have caused the Group Policy Service to terminate unexpectedly. To prevent further failures in the Group Policy
Service, this extension has been temporarily disabled until after the next system restart. Group Policy settings managed by this extension may no longer be enforced until the system is restarted. The vendor of this extension should be contacted if this issue
recurs.
and after that a lot of this errors:
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the CryptSvc service.
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the NlaSvc service.
The RDP protocol component X.224 detected an error in the protocol stream and has disconnected the client.
timeout (30000 milliseconds) was reached while waiting for a transaction response from the Schedule service.
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the gpsvc service.
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the BITS service.
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the SessionEnv service.
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the ShellHWDetection service.
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the CertPropSvc service.
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the IKEEXT service.
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the iphlpsvc service.
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the SessionEnv service.
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the iphlpsvc service.
During the problem we ping DC and Network Share where Profile and Document Redirection resides and they were working OK (we also did a
\\server\HomeUsers and we reached it without problem)
Only reseting the server worked, Any Ideas of what could be causing this ?? Best Regards
Federico Giampietri Latamsupport IT Infrastructure Services

Hi Clarence,
Today we experienced the problem again,
Users can’t login to RDS, but now they got stucked at “"Please wait for the Group Policy client”;
System log events recorded the following errors again:
timeout (30000 milliseconds) was reached while waiting for a transaction response from the Schedule service.
timeout (30000 milliseconds) was reached while waiting for a transaction response from the sessionenv service.
timeout (30000 milliseconds) was reached while waiting for a transaction response from the ShellHWDetection service.
timeout (30000 milliseconds) was reached while waiting for a transaction response from the Wuauserv service.
timeout (30000 milliseconds) was reached while waiting for a transaction response from the BITS service.
timeout (30000 milliseconds) was reached while waiting for a transaction response from the CertPropSvc service.
What path do you suggest to investigate further?
Thanks a lot!
Federico Giampietri Latamsupport IT Infrastructure Services

Unable to print to local Printer over RDP - Windows Server 2008

Hi,
Windows 2008 Foundation R2.
Started to have issues with printing to a Local printer over RDP.
The problems started on Friday 11th April. The only possible issue I can identify is that around that time LogMeIn was updated on the server, including the LMIPrinter DLL's. I have contacted Logmein for instructions on how to uninstall LMI completely
and followed these but am still experiencing the problem.
When attempting a Test Page print the confirmation that the Test Print has been sent to is displayed and the print appears then disappears in the Print queue but nothing appears on the Local PC print queue or event logs.
On the server the Event Log shows the following error;
The document Test Page, owned by admin, failed to print on printer Canon MG7100 series Printer (redirected 2/copy 1). Try to print the document again, or restart the print spooler.
Data type: RAW. Size of the spool file in bytes: 142691. Number of bytes printed: 0. Total number of pages in the document: 1. Number of pages printed: 0. Client computer: \\ONESTAGE-TS01. Win32 error code returned by the print processor: 2147500037. Unspecified
error
I have searched for possible solutions to RDP printing problems and where relevant implemented them but no change.
I have access to a second customer who uses RDP and am able to log onto that and print to my local printer so am pretty sure there is nothing wrong with the local printer or settings. On the Server with the problem the problem affects all RDP users
and all printers (including Adobe PDF printer and MS XPS printer). All printers are defaulting to the EasyPrint Drivers.
Grasping at straws I think the LMI update has banjaxed something with the RDP remote printing and an LMI uninstall hasn't fixed it. Is there a way to reinstall the RDP Printing? Would uninstalling & reinstalling .NET have that effect?

Hi,
Thank you for posting in Windows Server Forum.
What’s your client OS and RDP version in your environment?
First of all suggest you to run “sfc /scanow” with this link to check whether which file causing the issue. Check the RDP version on the RDP client computer as well as the .NET framework version with respect to the operating system used (as explained above).
Also verify that the RD Session Host / Terminal Server role is installed if the host computer is running Windows Server 2008 R2 or Windows Server 2008.
The setting “Use Remote Desktop Easy Print printer driver first” must be set to “Enabled” for Easy Print redirection, and it has to be “Disabled” for Legacy Print. For “Not configured”, Easy Print is chosen by default.
Check The Remote Desktop Configuration Tool (tsconfig.msc) settings to ensure that the “Windows Printer” option is not disabled (it is not disabled by default).
Make sure that the “Printers” check box in the client (mstsc.exe) window on the “Local Resources” tab is checked. The corresponding setting in the associated RDP file is “redirectprinters:i:1”.
More information:
Using Remote Desktop Easy Print in Windows 7 and Windows Server 2008 R2
http://blogs.msdn.com/b/rds/archive/2009/09/28/using-remote-desktop-easy-print-in-windows-7-and-windows-server-2008-r2.aspx?Redirected=true
Hope it helps!
Thanks.
Dharmesh Solanki

Windows Server 2008 R2 only detect USB storage drives if I restart the system

Hi, I have a Windows Server 2008 R2 with an weird behaviour. I cannot connect any USB drive (not USB external hard disk neither pendrives). Windows device manager detects the device as
Mass Storage Device, but with a yellow exclamation sign. The exact error code is:
The device cannot start.
However, if I restart the machine keeping the USB disk plugged, the hard disk (or pendrive) is correctly detected and usable.
I've tried:
Update mass storage driver.
Review HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\usbstor "Start"
and is 3 (I think is right)
I've tried with different usb hard disks that are working in other PCs.
I've tried with large (>1TB) disks and small (8GB) pendrives.
I've tried all available USB ports, front and back, with same behaviour.
Always I get a yellow exclamation (Device cannot start) and if I restart the computer the device is working perfectly.
Can someone help me?
Thanks in advance
Edit: Here is the log of connecting a Kingstone USB 8GB pendrive
>>> [Device Install (Hardware initiated) - USB\VID_0930&PID_6544\C860008863DBCE801A0B24B4]
>>> Section start 2015/01/09 09:35:49.342
ump: Creating Install Process: DrvInst.exe 09:35:49.498
ndv: Retrieving device info...
ndv: Setting device parameters...
ndv: Searching Driver Store and Device Path...
dvi: {Build Driver List} 09:35:49.966
dvi: Searching for hardware ID(s):
dvi: usb\vid_0930&pid_6544&rev_0100
dvi: usb\vid_0930&pid_6544
dvi: Searching for compatible ID(s):
dvi: usb\class_08&subclass_06&prot_50
dvi: usb\class_08&subclass_06
dvi: usb\class_08
cpy: Policy is set to make all digital signatures equal.
dvi: Enumerating INFs from path list 'C:\Windows\inf'
inf: Opened PNF: 'C:\Windows\System32\DriverStore\FileRepository\usbstor.inf_amd64_neutral_26b33263a639795d\usbstor.inf' ([strings.0c0a])
dvi: Created Driver Node:
dvi: HardwareID - USB\Class_08&SubClass_06&Prot_50
dvi: InfName - C:\Windows\System32\DriverStore\FileRepository\usbstor.inf_amd64_neutral_26b33263a639795d\usbstor.inf
dvi: DevDesc - Dispositivo de almacenamiento USB
dvi: DrvDesc - Dispositivo de almacenamiento USB
dvi: Provider - Microsoft
dvi: Mfg - Dispositivo de almacenamiento USB compatible
dvi: ModelsSec - Generic.NTamd64
dvi: InstallSec - USBSTOR_BULK
dvi: ActualSec - USBSTOR_BULK.NT
dvi: Rank - 0x00ff2000
dvi: Signer - Microsoft Windows
dvi: Signer Score - INBOX
dvi: DrvDate - 06/21/2006
dvi: Version - 6.1.7601.17577
inf: Searched 1 potential matches in published INF directory
inf: Searched 36 INFs in directory: 'C:\Windows\inf'
dvi: {Build Driver List - exit(0x00000000)} 09:35:51.900
ndv: Selecting best match from Driver Store (including Device Path)...
dvi: {DIF_SELECTBESTCOMPATDRV} 09:35:51.900
dvi: No class installer for 'DataTraveler 2.0'
dvi: No CoInstallers found
dvi: Default installer: Enter 09:35:51.900
dvi: {Select Best Driver}
dvi: Selected driver installs from section [USBSTOR_BULK] in 'c:\windows\system32\driverstore\filerepository\usbstor.inf_amd64_neutral_26b33263a639795d\usbstor.inf'.
dvi: Class GUID of device changed to: {36fc9e60-c465-11cf-8056-444553540000}.
dvi: Set selected driver complete.
dvi: Selected:
dvi: Description - [Dispositivo de almacenamiento USB]
dvi: InfFile - [c:\windows\system32\driverstore\filerepository\usbstor.inf_amd64_neutral_26b33263a639795d\usbstor.inf]
dvi: Section - [USBSTOR_BULK]
dvi: Signer - [Microsoft Windows]
dvi: Rank - [0x00ff2000]
dvi: {Select Best Driver - exit(0x00000000)}
dvi: Default installer: Exit
dvi: {DIF_SELECTBESTCOMPATDRV - exit(0x00000000)} 09:35:51.916
inf: {SetupCopyOEMInf: C:\Windows\INF\usbstor.inf} 09:35:51.931
inf: Driver Store location: C:\Windows\System32\DriverStore\FileRepository\usbstor.inf_amd64_neutral_26b33263a639795d\usbstor.inf
inf: Published Inf Path: C:\Windows\INF\usbstor.inf
inf: {SetupCopyOEMInf exit (0x00000050)} 09:35:51.931
dvi: Searching for hardware ID(s):
dvi: usb\vid_0930&pid_6544&rev_0100
dvi: usb\vid_0930&pid_6544
dvi: Searching for compatible ID(s):
dvi: usb\class_08&subclass_06&prot_50
dvi: usb\class_08&subclass_06
dvi: usb\class_08
inf: Opened PNF: 'C:\Windows\System32\DriverStore\FileRepository\usbstor.inf_amd64_neutral_26b33263a639795d\usbstor.inf' ([strings.0c0a])
dvi: Selected driver installs from section [USBSTOR_BULK] in 'c:\windows\system32\driverstore\filerepository\usbstor.inf_amd64_neutral_26b33263a639795d\usbstor.inf'.
dvi: Class GUID of device changed to: {36fc9e60-c465-11cf-8056-444553540000}.
dvi: Set selected driver complete.
ndv: Driver selected, now performing install...
ndv: {Core Device Install} 09:35:51.947
inf: Opened PNF: 'C:\Windows\INF\usbstor.inf' ([strings.0c0a])
inf: Opened PNF: 'C:\Windows\INF\usbstor.inf' ([strings.0c0a])
dvi: {DIF_ALLOW_INSTALL} 09:35:52.259
dvi: No class installer for 'Dispositivo de almacenamiento USB'
dvi: No CoInstallers found
dvi: Default installer: Enter 09:35:52.259
dvi: Default installer: Exit
dvi: {DIF_ALLOW_INSTALL - exit(0xe000020e)} 09:35:52.259
ndv: Installing files...
dvi: {DIF_INSTALLDEVICEFILES} 09:35:52.306
dvi: No class installer for 'Dispositivo de almacenamiento USB'
dvi: Default installer: Enter 09:35:52.306
dvi: {Install FILES}
inf: Opened PNF: 'c:\windows\system32\driverstore\filerepository\usbstor.inf_amd64_neutral_26b33263a639795d\usbstor.inf' ([strings.0c0a])
inf: {Install Inf Section [USBSTOR_BULK.NT]}
inf: CopyFiles=USBSTOR.CopyList (usbstor.inf line 173)
flq: CopyFiles from an inbox inf.
cpy: Open PnpLockdownPolicy: Err=2. This is OK. Use LockDownPolicyDefault
flq: QueueSingleCopy...
flq: Inf : 'c:\windows\system32\driverstore\filerepository\usbstor.inf_amd64_neutral_26b33263a639795d\usbstor.inf'
flq: SourceInf: 'c:\windows\system32\driverstore\filerepository\usbstor.inf_amd64_neutral_26b33263a639795d\usbstor.inf'
flq: SourceSection: [sourcedisksfiles]
flq: Source root path based on SourceInf
flq: SourceRootPath: 'C:\Windows\System32\DriverStore\FileRepository\usbstor.inf_amd64_neutral_26b33263a639795d'
flq: {FILE_QUEUE_COPY}
flq: CopyStyle - 0x09000000
flq: {FILE_QUEUE_COPY}
flq: CopyStyle - 0x09000000
flq: SourceRootPath - 'C:\Windows\System32\DriverStore\FileRepository\usbstor.inf_amd64_neutral_26b33263a639795d'
flq: SourceFilename - 'USBSTOR.SYS'
flq: TargetDirectory- 'C:\Windows\system32\drivers'
flq: TargetFilename - 'USBSTOR.SYS'
flq: SourceDesc - 'windows cd'
flq: {FILE_QUEUE_COPY exit(0x00000000)}
flq: {FILE_QUEUE_COPY exit(0x00000000)}
inf: {Install Inf Section [USBSTOR_BULK.NT] exit (0x00000000)}
dvi: Processing co-installer registration section [USBSTOR_BULK.NT.CoInstallers].
inf: {Install Inf Section [USBSTOR_BULK.NT.CoInstallers]}
inf: {Install Inf Section [USBSTOR_BULK.NT.CoInstallers] exit (0x00000000)}
dvi: Co-installers registered.
dvi: {Install INTERFACES}
dvi: Installing section [USBSTOR_BULK.NT.Interfaces]
dvi: {Install INTERFACES exit 00000000}
dvi: {Install FILES exit (0x00000000)}
dvi: Default installer: Exit
dvi: {DIF_INSTALLDEVICEFILES - exit(0x00000000)} 09:35:52.384
ndv: Pruning file queue...
dvi: {_SCAN_FILE_QUEUE}
flq: ScanQ flags=620
flq: SPQ_SCAN_PRUNE_COPY_QUEUE
flq: SPQ_SCAN_FILE_COMPARISON
flq: SPQ_SCAN_ACTIVATE_DRP
flq: ScanQ number of copy nodes=1
flq: File 'C:\Windows\system32\drivers\USBSTOR.SYS' pruned from copy.
sig: Using catalog 'C:\Windows\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\Package_3_for_KB982018~31bf3856ad364e35~amd64~~6.1.3.2.cat'.
cpy: DrpSetRegFileProt 'C:\Windows\system32\drivers\USBSTOR.SYS' Status=0 Class=Inbox Windows protected
flq: ScanQ action=200 DoPruning=32
flq: ScanQ end Validity flags=620 CopyNodes=0
dvi: {_SCAN_FILE_QUEUE exit(0, 0x00000000)}
ndv: Committing file queue...
flq: {_commit_file_queue}
flq: CommitQ DelNodes=0 RenNodes=0 CopyNodes=0
flq: CommitQ early exit: No nodes are queued
flq: {_commit_file_queue exit OK}
ndv: Registering CoInstallers...
dvi: {DIF_REGISTER_COINSTALLERS} 09:35:54.037
dvi: No class installer for 'Dispositivo de almacenamiento USB'
dvi: Default installer: Enter 09:35:54.069
inf: Opened PNF: 'c:\windows\system32\driverstore\filerepository\usbstor.inf_amd64_neutral_26b33263a639795d\usbstor.inf' ([strings.0c0a])
inf: {Install Inf Section [USBSTOR_BULK.NT.CoInstallers]}
inf: {Install Inf Section [USBSTOR_BULK.NT.CoInstallers] exit (0x00000000)}
dvi: Co-installers registered.
dvi: Default installer: Exit
dvi: {DIF_REGISTER_COINSTALLERS - exit(0x00000000)} 09:35:54.100
ndv: Installing interfaces...
dvi: {DIF_INSTALLINTERFACES} 09:35:54.100
dvi: No class installer for 'Dispositivo de almacenamiento USB'
dvi: No CoInstallers found
dvi: Default installer: Enter 09:35:54.100
dvi: {Install INTERFACES}
inf: Opened PNF: 'c:\windows\system32\driverstore\filerepository\usbstor.inf_amd64_neutral_26b33263a639795d\usbstor.inf' ([strings.0c0a])
dvi: Installing section [USBSTOR_BULK.NT.Interfaces]
dvi: {Install INTERFACES exit 00000000}
dvi: Default installer: Exit
dvi: {DIF_INSTALLINTERFACES - exit(0x00000000)} 09:35:54.100
ndv: Installing device...
dvi: {DIF_INSTALLDEVICE} 09:35:54.100
dvi: No class installer for 'Dispositivo de almacenamiento USB'
dvi: Default installer: Enter 09:35:54.100
dvi: {Install DEVICE}
inf: Opened PNF: 'c:\windows\system32\driverstore\filerepository\usbstor.inf_amd64_neutral_26b33263a639795d\usbstor.inf' ([strings.0c0a])
dvi: Processing Registry/Property directives...
inf: {Install Inf Section [USBSTOR_BULK.NT]}
inf: AddReg=USBSTOR_BULK.AddReg (usbstor.inf line 174)
inf: {Install Inf Section [USBSTOR_BULK.NT] exit (0x00000000)}
inf: {Install Inf Section [USBSTOR_BULK.NT.Hw]}
inf: Empty section
inf: {Install Inf Section [USBSTOR_BULK.NT.Hw] exit (0x00000000)}
dvi: {Writing Device Properties}
dvi: Provider name=Microsoft
dvi: DriverDate 06/21/2006
dvi: DriverVersion=6.1.7601.17577
dvi: Class name=USB
dvi: Manufacturer=Dispositivo de almacenamiento USB compatible
dvi: Matching DeviceID=usb\class_08&subclass_06&prot_50
dvi: Strong Name=usbstor.inf:Generic.NTamd64:USBSTOR_BULK:6.1.7601.17577:usb\class_08&subclass_06&prot_50
dvi: {Writing Device Properties - Complete}
inf: {Install Inf Section [USBSTOR_BULK.NT.Services]}
inf: Addservice=USBSTOR,0x00000002,USBSTOR.AddService (usbstor.inf line 177)
inf: ServiceType=1 (usbstor.inf line 234)
inf: StartType=3 (usbstor.inf line 235)
inf: ErrorControl=1 (usbstor.inf line 236)
inf: ServiceBinary=C:\Windows\system32\DRIVERS\USBSTOR.SYS (usbstor.inf line 237)
inf: DisplayName="Controlador de dispositivo de almacenamiento USB" (usbstor.inf line 233)
dvi: Add Service: Modified existing service 'USBSTOR'.
inf: AddReg=DeviceSpecific (usbstor.inf line 238)
inf: {Install Inf Section [USBSTOR_BULK.NT.Services] exit(0x00000000)}
dvi: Updated reflected section names for: usbstor.inf
dvi: {Install DEVICE exit (0x00000000)}
dvi: Writing common driver property settings.
dvi: DriverDescription=Dispositivo de almacenamiento USB
dvi: DeviceDisplayName=Dispositivo de almacenamiento USB
dvi: Install Device: Restarting device. 09:35:54.537
dvi: Install Device: Restarting device completed. 09:35:57.625
!!! dvi: Device not started: Device has problem: 0x0a: CM_PROB_FAILED_START.
dvi: Default installer: Exit
dvi: {DIF_INSTALLDEVICE - exit(0x00000000)} 09:35:57.641
dvi: {DIF_NEWDEVICEWIZARD_FINISHINSTALL} 09:35:57.641
dvi: No class installer for 'Dispositivo de almacenamiento USB'
dvi: Default installer: Enter 09:35:57.641
dvi: Default installer: Exit
dvi: {DIF_NEWDEVICEWIZARD_FINISHINSTALL - exit(0xe000020e)} 09:35:57.657
ndv: Device install status=0x00000000
ndv: Performing device install final cleanup...
! ndv: Queueing up error report since device has a PnP problem...
ndv: {Core Device Install - exit(0x00000000)} 09:35:59.201
ump: Server install process exited with code 0x00000000 09:35:59.232
<<< Section end 2015/01/09 09:35:59.279
<<< [Exit status: SUCCESS]

I tried, but windows says that the best driver is alredy installed.
Now I've just tried to delete (uninstall) absolutly all devices under Universal Serial Bus Controller
(host controllers, root hubs, etc) into Device Manager, and then I've click on
Scan for hardware changes to force reinstall of all USB drivers. After that I've connected my USB external hard disk and has been correctly recognized and its working. However I don't know if when I'll restar the server and connect a new one usb device
it will continue working or not. I'll try later, because this is a production server.
I've tried for drivers into HP site to update or reinstall, but there isn't any driver for motherboard or USB controller. It's an HP ML350 G6.

Windows 8.1 RDP Issues with Windows Server 2008 Standard.

I have an issue maintaining an RDP connection from 64-bit windows 8.1 (standard and pro) to 32-bit Windows Server 2008 Standard. Initial connection is normal, and as long as I am constantly typing on the link, for the most part it stays up. However
if I do not keep typing, or go to another desktop program for a few minutes, and then go back, the following happens:
If I am typing into notepad (or some screen that does not require windows to be refreshed) I can continue to do so, so the connection has not been lost, however if I try to do something that requires more extensive exchange of information (like file
- open, or even trying to pull up the start menu), the connection pauses with about half the screen refreshed, sometimes after about 30 seconds a bit more of the screen fills out, but otherwise the connection is not responsive. Then after about 2 minutes,
RDP reconnects, at which point I am back to "normal". I have conducted some tests and made inquiries of others attempting to connect to the server.
1) I can connect to other Windows (servers 2008 R2 and 2012) with no connection issues from this PC
2) I can connect to the 32-bit server with no issues using Windows Vista Ultimate and Windows 7 from the same location as the WIndows 8.1 PC
3) When I do a network speed test while having these issues I see full download and upload speeds, so I am not experiencing intermittent internet issues.
4) No-one else from other locations (not of course using Windows 8.1) has any issues using RDP to the 32-bit Windows Server Standard.
These various tests seem to eliminate my network connection, and other operating systems, from the equation, and point to RDP issues on windows 8.1 connecting to the older OS. I noticed in the September updates, a case 2989039 which seemed to point
to similar issues when using UDP through Remote Desktop Gateway. That update is on my machine, and my connection has the setting Automatically detect RD Access Gateway server settings.
Any thoughts anyone?

Hi RonaldRenaud,
If my understanding is right, this RDP issue only occur in the connection between Windows 8.1 and Server 2008.
Please check if you have installed the update kb2984006.
To resolve this issue caused by update 2989039, install update rollup 2984006. For more information, please refer to the following KB.
http://support2.microsoft.com/kb/2989039/en-us
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Printing problem with Konica Minolta BizHub282 using RDP on Windows Server 2008 R2

Hello,
I have an office setup as follows: Local office IP adress scheme 192.168.201.x. There is a Konica Minolta BizHub 282 printer connected to the 192.168.201.x network as well as around 10 workstations running Windows 7. There are also about
10 additional teleworkers WHO DO NOT NEED print access to the Minolta 282. All of their data is on a cloud server. I have them setup to first connect to the cloud server using a RRAS PPTP VPN and then to start an RDP session to the separate
RDP server. The Konica Minolta works ??okay?? with the easy print services and until now, we have just dealt with the lack of features and the occasional print job that goes crazy and prints out 400 blank pages (btw, this is usually on Excel) or a job
that cuts off the margins even when you have it set to "fit to page" (this usually happens in Adobe.) When I originally set this up, I tried loading the native Konica drivers on the server, but there was no joy because I couldn't get it to
work using the native drivers. The problem at hand is a feature called "account track." This feature authenticates your print job by using an account code. If there is no code, the job just disappears. When I load the native
Konica driver, the ability to turn on this feature is greyed out (see below):
When I use easy print, the codes seem to go through, but as I mentioned earlier, sometimes the print job just goes insane. After researching this, it seems to me that there are two ways to overcome this if we can't turn off the account track feature:
1) Overcome the driver problem. I've tried both of their current drivers without success: VXL and Visual Postscript. When I login to RDP, the (redirected) Konica 282 printer is listed, but when I try to print, it fails due to the missing account track code.
I'm hoping that there is a registry hack to turn this feature on by default with the code or a driver version that works with RDP. They have a WHQL driver available, but it didn't work any better. Is there a way to report this issue to the WHQL labs? Maybe
I can light a fire under Konica's rear end and motivate them to fix the driver.
2) I saw one discussion where the guy installed the printer out in the clouds as a local printer. He seemed to have a site-to-site VPN, not a client-to-site VPN, so this worked. Is there a way to do something similar when the customer connects to the
VPN through standard "connect to workplace" setup? I tried pinging the Konica 282 from the server while logged into the VPN, but the printer could not be found.
3) I considered setting it up as a google cloud print prnter, but that would require everyone to setup a google account and add a layer of complexity.
Anyone else run into this and have a solution? If not, does anyone have any ideas on a solution or workaround?
Thanks,
Jeffery Smith

Hi Jeffery,
Thank you for your comment.
Yeah, you can use universal print driver by configuring Remote Desktop Easy print on RDS Server. Install the driver on RDS server. Now to configure Easy print you need to have minimum client RDP 6.1(But suggest you to install RDP 8.1), .Net Framework 3.5 or
above and RDSH role.
Also under GPO setting need to check below settings.
Do not allow client print redirection: Disable
Use Terminal Service Easy print printer driver first: Enable
Computer Configuration > Administrative templates > Windows Components > Remote Desktop Services > Remote Desktop Session Host > Printer redirection
For more information, you can refer below articles.
How to configure Microsoft RDS Universal Printing
http://www.virtualizationadmin.com/articles-tutorials/vdi-articles/microsoft-hyper-v/how-configure-microsoft-rds-universal-printing.html
Using Remote Desktop Easy Print in Windows 7 and Windows Server 2008 R2
http://blogs.msdn.com/b/rds/archive/2009/09/28/using-remote-desktop-easy-print-in-windows-7-and-windows-server-2008-r2.aspx?Redirected=true
Hope it helps!
Thanks.
Dharmesh Solanki

Windows Server 2008 sp2 Task Scheduler missing next run time after restart

Hi,
I have the issue that there does not appear to be a fix for with a server 2008 sp2 (NOT R2) where after a restart all tasks are missing the next run time so I need to edit each task to add this time back in. I have tried the hotfix in KB 950035
but this when you run it is only for Vista and cannot be installed despite saying it's also for Server 2008.
For some reason also this is Task Scheduler version 1 not 2 which I thought came with windows since Vista so SP2 should have it.
Anyone got any ideas?
Thanks,

Hi Evans,
Would you please let us know current situation of this issue?
As Dave mentioned, Windows Server 2008 Service Pack 2 include all the previously released updates for Windows
Server 2008.
Based on your description, I understand that all scheduled tasks still miss the next run time on your Windows
Server SP2 when the server restart. If anything I misunderstand, please don’t hesitate to let me know.
On current situation, please open Properties of one problematic scheduled task, navigate to History tab, then
check if find some relevant events or errors. Those may help us to go further analyze.
If any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Windows server 2008 r2 KB2871997 unexpected restarts

Hi there,
after I have installed KB2871997 on several Windows Servers we have a lot of unexpected restarts:
Log Name:      System
Source:        LsaSrv
Date:          19.05.2014 11:19:24
Event ID:      5000
Task Category: None
Level:         Error
Keywords:
User:          SYSTEM
Computer:      xxx
Description:
The security package Kerberos generated an exception. The exception information is the data.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="LsaSrv" Guid="{199FE037-2B82-40A9-82AC-E1D46C792B99}" />
    <EventID>5000</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2014-05-19T09:19:24.603807100Z" />
    <EventRecordID>33660</EventRecordID>
    <Correlation />
    <Execution ProcessID="508" ThreadID="2216" />
    <Channel>System</Channel>
    <Computer>xxx</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="Package">Kerberos</Data>
    <Binary>050000C00000000000000000000000004C96E2FCFE0700000200000000000000000000000000000004000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</Binary>
</EventData>
</Event>
Log Name:      System
Source:        USER32
Date:          19.05.2014 11:19:40
Event ID:      1074
Task Category: None
Level:         Information
Keywords:      Classic
User:          SYSTEM
Computer:     xxx
Description:
The process wininit.exe has initiated the restart of computer xxx on behalf of user for the following reason: No title for this reason could be found
Reason Code: 0x50006
Shutdown Type: restart
Comment: The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code -1073741819. The system will now shut down and restart.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="USER32" />
    <EventID Qualifiers="32768">1074</EventID>
    <Level>4</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-05-19T09:19:40.000000000Z" />
    <EventRecordID>33662</EventRecordID>
    <Channel>System</Channel>
    <Computer>xxx</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data>wininit.exe</Data>
    <Data>xxx</Data>
    <Data>No title for this reason could be found</Data>
    <Data>0x50006</Data>
    <Data>restart</Data>
    <Data>The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code -1073741819. The system will now shut down and restart.</Data>
    <Data>
    </Data>
    <Binary>06000500000000000000000000000000000000000000000000000000000000000000000000000000</Binary>
</EventData>
</Event>
The "Network security: Configure encryption types allowed for Kerberos" is global set to
AES128_HMAC_SHA1
AES256_HMAC_SHA1
Future encryption types
Cipher sutes are restricted to: TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384_P521,TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384_P384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256_P256,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256_P384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256_P521,TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256_P256,TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256_P384,TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256_P521,TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA_P256,TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA_P521,TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA_P256,TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA_P521,TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA_P522,TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA_P256,TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256,TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P384,TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P521,TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA_P256,TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA_P521,TLS_RSA_WITH_AES_256_CBC_SHA256,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_RSA_WITH_AES_128_CBC_SHA256,TLS_DHE_DSS_WITH_AES_256_CBC_SHA256,TLS_DHE_DSS_WITH_AES_128_CBC_SHA256,TLS_RSA_WITH_RC4_128_SHA
Crazy one is, that a windows server 2012 R2 with MS Exchange 2013 SP1 (testserver) has also unexpected reboots, with the same error messages.
On the windows server 2008 r2 we have installed also KB2732595 but without success. The reboots stopping only after we had deinstall KB 2871997.
Best Regards
Christoph

Yes, it's windows server 2008r2 SP1
with KB 2871997
I have opened now a support case.
The server stopping rebooting, if on the "Network security: Configure encryption types allowed for Kerberos Policy"
-> RC4_HMAC_MD5
AES256_HMAC_SHA1
AES128_HMAC_SHA1
Future encryption types
activated, without RC4, the server reboots. Special one is, RC4 Ciphers are deactived by registry.
If KB 2871997 is deinstalled, the server stopp reboots also without RC4.

Windows server 2008 restarts

windows server 2008 SP2 32Bit restarts unexpectedly
i did check the server both in normal and safe mode with almost all versions of antivirus but could not find any viruses or worms or trojans,... current antivirus installed on the server is ESET NOD32 Version 4.2.64.12 . i also uninstalled eset from server
but restart got continue. i scanned for registry fixes but this also does not work.
windows server 2008 SP2 32Bit restarts unexpectedly with the following error:
Problem signature
Problem Event Name:    APPCRASH
Application Name:    services.exe
Application Version:    6.0.6002.18005
Application Timestamp:    49e01a51
Fault Module Name:    StackHash_4557
Fault Module Version:    6.0.6002.18327
Fault Module Timestamp:    4cb73436
Exception Code:    c0000374
Exception Offset:    000b06fc
OS Version:    6.0.6002.2.2.0.274.10
Locale ID:    1033
Additional Information 1:    4557
Additional Information 2:    bfd76257d090ab5cfe847243521e3dc2
Additional Information 3:    0480
Additional Information 4:    74c75507dc7b96bbc38163832598ea1a
Files that help describe the problem
Version.txt
AppCompat.txt
memory.hdmp
minidump.mdmp

You'd better post your question in one of the Windows Server Forums at the following web address
http://social.technet.microsoft.com/Forums/en-us/category/windowsserver
Bye.
Luigi Bruno - Microsoft Community Contributor 2011 Award

Windows Server 2008 R2 SP1 freezes and cannot access RDP

The system freezes every 15 minutes after a reboot. I am trying to capture some stats using procmon to see what is going on, but while I am working on it, it freezes so I cannot even save the file. Next, RDP does not work even when the system is up for that
15 minutes. Any idea what is going on? This behavior is only on this server. The last patch that this system should have is October. We are patching the November one's now.
Any thoughts or suggestions?
thanks in advance
AA2913

Hi,
Thank you for posting in Windows Server Forum.
Is there update for your case with Dave comment? Have you seen which process is making the server hang?
Please see below Hotfix if it’s applicable for your case.
A computer that is running Windows Server 2008 R2 or Windows 7 stops responding randomly
http://support.microsoft.com/kb/2265716/
Also you can go through this article for server hang case.
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

RDP audio issues with Windows Server 2008

I have a server with an M-Audio 1010LT audio card installed, running audio playback software. This software needs to stay running and playing at all times.
We were previously running Windows Server 2003 and when we RDPed into the box for maintenance, we simply made sure that 'Leave at remote computer" was selected under Remote Desktop's sound settings. This allowed us to control the console of the server while the audio continued to play through the server's audio card.
Now, with Windows Server 2008, even with this option selected when we remote into this server all audio stops and Windows shows no available audio devices. If I end my RDP session and phyically go to the server, I see the audio devices and am able to re-start the audio playback.
Is this a bug, or something that has changed in 2008? Any workarounds?
Thanks

*****************I
AM HAVING THIS ISSUE *****************
(Windows Server 2008 R2)
I
reply to this thread to hopefully get more attention to this issue and thus a [faster] resolution.

Windows server 2008 R2 keeps restarting itself randomly

Does anyone know why my Windows server 2008 R2, run by VMWare Fusion keep restarting randomly? Could it be that it says it is not genuine windows?

I checked the event log, there are errors regarding report server license expired, could it be that??
The application domain WindowsService_0 failed to start. Error: Microsoft.ReportingServices.Diagnostics.Utilities.EvaluationCopyExpiredException: The evaluation period for this instance of Microsoft SQL Server Reporting Services has expired. A license
is now required.
Server stack trace:
   at Microsoft.ReportingServices.Diagnostics.Sku.<>c__DisplayClass1.<GetSkuFromSqlBoot>b__0()
   at Microsoft.ReportingServices.Diagnostics.RevertImpersonationContext.<>c__DisplayClass1.<Run>b__0(Object state)
   at System.Security.SecurityContext.Run(SecurityContext securityContext, ContextCallback callback, Object state)
   at Microsoft.ReportingServices.Diagnostics.RevertImpersonationContext.Run(ContextBody callback)
   at Microsoft.ReportingServices.Diagnostics.Sku.GetSkuFromSqlBoot(String instanceId, Int32& outDaysLeft)
   at Microsoft.ReportingServices.Diagnostics.Sku.GetInstalledSku(String instanceId)
   at Microsoft.ReportingServices.Diagnostics.Sku.IsFeatureEnabled(String instanceId, RestrictedFeatures feature)
   at Microsoft.ReportingServices.Diagnostics.ResourceUtilities.LogCPUAndThrottleIfNecessary()
   at Microsoft.ReportingServices.Library.ServiceAppDomain.StartService(IServiceAppDomainController appDomainController, Boolean firstStart)
   at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage(IMessage msg, Int32 methodPtr, Boolean fExecuteInContext)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.ReportingServices.Library.IServiceAppDomain.StartService(IServiceAppDomainController controller, Boolean firstStart)
   at Microsoft.ReportingServices.Library.ServiceAppDomainController.StartServiceInNewAppDomain(Boolean firstTime).

Problems with RDP/RDC from Mac OSX to Windows Server 2008 on External IP

We have a customer that is using Mac and Microsoft's RDC for Mac to their servers.
They've just upgraded from Windows Server 2003 to 2008 and can't connect through RDP to their TS server on external IP.
Their servers is not in any domain and it work for them to connect to another Windows Server 2008 that is located in their office when they use internal IP.
The problem is that when using RDC to the external IP they get bellow:
"Remote Desktop cannot verify the identity of the computer you want to connect to. This problem can occur if:
The remote computer is running a version of Windows that is earlier than Windows Vista.
The remote computer is configured to support only the RDP security layer.
Contact your network administrator or the owner of the remote computer for assistance."
From here they can choose "Connect" as they did on the Server 2003 but now they get: "Remote Desktop Connection cannot verify the identity of the computer that you want to connect to.Try reconnecting to the Windows-based computer, or contact our administrator."
and is only able to choose "Ok".
I've changed the settings on the "configuration for host server for remote desktop sessions" under General from "RDP-Security Layer" to "Negotiate" and in this case I get a logon windows where i type in all my information click logon. Here I get another
error message which says something like: (We get it in Swedish). "Connection to the windows-based computer broke since there was a problem associated with the licensificationprotocol... Try to connect again" Where I can choose "Cansel" or "reconect"
but it just keeps poping up if i chose reconnect.
I've tried all settings in the TS server and there is not much to change on the RDP client. We have installed the server certificate on the Mac client but it didn't help.
We've also tried with CoRD and it works fine as RDP from a normal Windows based computer.
The only solution I've found on google is to use CoRD instead but we got problems with that connection since it keep crasching on our computer.
In my eyes the problem is on the security requirements that the RDC for Mac needs but I can't find any inforamtion on MS sites about it.
Greatfull for all tips and trix!

I too was having the problem same as everyone else. However, for me the problem all started when I replaced my SSL certificate that was used/selected in the Remote Desktop Session Host Configuration utility, connections, RDP-TCP Properties. The security
layer is negotiate and the certificate is the one selected on that screen. It was not licensing related.
The certificate had expired and I didn't believe I needed it. But turns out I did, so I had to generate and validate a new one using GoDaddy (though they specifically were not part of the problem). As my Terminal Servers (Remote desktop servers)
do not have IIS installed, I was a bit stumped on how to create a new certificate request. I finally found some instructions on how to create a certificate request using the MMC snap-in, advanced operations, create custom request. The template
chosen was "legacy key", and without boring the rest of the details that part was the root cause of my problem. The legacy key was not able to be processed correctly by the Mac RDC client. Neither the official 2.1.1 client or the 2.1.2 download.
The Terminal Server system event log was showing the following two errors, 36874 and 36888. The first one contained the best details and said: "An TLS 1.0 connection request was received from a remote client application, but none of the cipher suites
supported by the client application are supported by the server. The SSL connection request has failed." Upon searching the internet for that, I found this page which described the legacy key problem:
http://social.msdn.microsoft.com/Forums/en-US/sqlreportingservices/thread/3a2d2eec-000d-432a-abd7-6b965268c671
So, my solution most familiar to me was to use IIS and create the SSL certificate request, process that with my 3rd party CA, export the certificate with private key and then import that certificate into all of my terminal servers. Then using the session
host configuration tool, pick the new certificate and the problem was now solved.

Windows Server 2008 R2 - Won't load certain web pages - Happens in all browers - Won't do windows updates

This server (Windows Server 2008 R2 Standard with SP1) is used to host thin clients as well as RDP sessions. One morning the office is fine, they come back from lunch and all of the sudden they can't load certain web pages, such as adobe.com
and pandora.com to name a couple. This was roughly 3 days ago.
1.) I have tried machines that are not connected to this server (not thin client or RDP), but are on the same network, they can load up any web page fine with no issues.
2.) On the server I have tried Opera, Chrome, IE and Firefox, all have the same exact problem.
3.) Tried different DNS servers just to be sure, even though it only effects the server and no one else.
Based on these facts I know that it is something wrong with the server, but not tied to a specific brower. In all browsers when you load up a page in question it just sits there with a blank screen trying to load, it never generates any errors.
The Event Viewer is also clean, no errors. So with no errors I have had trouble trying to find a starting place for this. Things I have tried:
1.) ipconfig /flushdns to try and clear out any DNS issues
2.) Changing the DNS servers for the server to 8.8.8.8 and 4.2.2.2
3.) Scanning for Viruses and Malware/Spyware
4.) Checking proxy settings on the server
5.) Updating and then removing Adobe Flash (thought it was tied to flash at first). Problem persists even with no flash player installed.
6.) Completed a failed update of .net, no effect
7.) Loading up browsers in debug mode to try and find anything in the site code that I could relate between failed sites. I found nothing I could identify
Of all issues to finally be stumped on this seems like an easy one, but I can't even begin to come up with an idea at this point.
I have tried to lay out all of the facts that I know as plainly as I can. I am hoping that someone has seen this before as this issue is effecting a number of differnt users and keeping them from doing portions of their job.
Help is most appreciated, thank you!

I was able to figure out a solution.
CAUSE:
It appears that the Internet isn’t fully up to date and ready to use EDns -- which is enabled on Windows Server 2008 R2 by default. The solution for this is to disable Edns. Note that this isn’t
a problem for most Windows Server 2008 R2 member servers. It’s only a problem for DNS *servers* that do recursive lookups. i.e. likely only your domain controller will be affected if that is where your DNS Server role exists.
SOLUTION:
To disable EDns, you can do it from the command prompt, or by editing the registry.
Create a DWORD called EnableEDNSProbes and set to 0 in HKLM\SYSTEM\CurrentControlSet\services\DNS\Parameters
Restart the DNS Server service for it to take effect.

Windows Server 2008 R2 SP1 unreachable thru network

Hi guys,
Recently we had to reinstall our Windows Server 2008 R2 because of logical HDD failures. Since the reinstallation of mentioned Windows Server 2008 R2, we're facing different issues:
Server stucks and any of applications can't be started nor the RDP conection can be established (ping passes and I am able to telnet to this server per opened ports in firewall)
After the restart, we're unable to ping the server (Destination host unrechable)
After the user logs in on the server phisically, it takes a few minutes that server becomes online and for a random time everything is just fine until the server stucks again
After the logon, we're able to ping this server
I checked the event viewer and I ca't see anything strange (critical stop caused by physical restarts and Event ID-s 1129 and 129 because the server is offline until logon and unable to communicate with DC).
Did any one faced theese issues before and does any one have any idea how to resolve this issue?
Thank you for your help in advance.

What hardware is this? Have you installed the manufacturer chipset? The chipset allows the operating system to find and use the devices integrated into mono.
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Windows Server 2008 R8 restarts on RDP

Similar Messages

Maybe you are looking for