Windows Server 2008 sp2 Task Scheduler missing next run time after restart

Hi,
I have the issue that there does not appear to be a fix for with a server 2008 sp2 (NOT R2) where after a restart all tasks are missing the next run time so I need to edit each task to add this time back in. I have tried the hotfix in KB 950035
but this when you run it is only for Vista and cannot be installed despite saying it's also for Server 2008.
For some reason also this is Task Scheduler version 1 not 2 which I thought came with windows since Vista so SP2 should have it.
Anyone got any ideas?
Thanks,

Hi Evans,
Would you please let us know current situation of this issue?
As Dave mentioned, Windows Server 2008 Service Pack 2 include all the previously released updates for Windows
Server 2008.
Based on your description, I understand that all scheduled tasks still miss the next run time on your Windows
Server SP2 when the server restart. If anything I misunderstand, please don’t hesitate to let me know.
On current situation, please open Properties of one problematic scheduled task, navigate to History tab, then
check if find some relevant events or errors. Those may help us to go further analyze.
If any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Evenlog viewing causes CPU usage 100% on Windows server 2008 SP2

We have Windows server 2008 SP2 with strange behaviour. When I scroll down events in eventlog viewer CPU usage hits 100% and eventlog viewer freeze. CPU usage is split between 2 processes SVCHOST.EXE (lmhosts, eventlog and Dhcp services) and MMC.EXE.
1)I tried to replace eventlog files with new ones. That didn’t helped
2)After server clean boot problem still exist.
3)When CPU hits 100% usage process explorer shows that from SVCHOST.EXE process CPU is used by service EventLog.
Any ideas how to fix this?

Hi Santosh
I re-installed VMware
tools and also configured VMXNET 3 - nothing changed :(
Sorry to hear that.
Windows event log service has couple of dependencies i.e. task scheduler and windows event collector service. Can try restrating those services ?
In addition to above, try following steps
Change NTFS permission of %WINDIR%\System32\WinEvt\Logs directory, add Local Service and
Network Service, give them FULL permissions.
Stop and Start event viewer service by running following command
net stop eventlog && net start eventlog
Issues like this might occur if the disk (FC or iSCSI SAN or even NAS) has some inconsistencies , this is true in case of both physical and virtual machines
You might want to try running chkdisk as well on the server in question
http://technet.microsoft.com/en-us/library/cc730714(v=ws.10).aspx
If nothing helps, try inplace upgrade of the Operating system as an last option.
How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
http://support.microsoft.com/kb/2255099
Thanks
Regards, Santosh
I do not represent the organisation I work for, all the opinions expressed here are my own.
This posting is provided "AS IS" with no warranties or guarantees and confers no rights.
Whenever you see a helpful reply, click on Vote As Helpful & click on
Mark As Answer if a post answers your question.

Error While Creating Windows Server 2008 SP2 32-BIT Virtual Machine

I am facing an error while creating a Virtual Machine on the Cloud. The Error is below:
Error (610)
Virtual Machine Manager was unable to find a value for the required Sysprep parameter ProductKey.
Recommended Action
Add the missing Sysprep parameter either to the answer file or to the operating system configuration, and then try the operation again.
My Template does not have the Product Key defined. The OS is Windows Server 2008 SP2 32-BIT. Is defining Product Key absolutely necessary? I have other Templates for other Operating Systems and they are working fine. Only facing problem
with this.
Any help would be appreciated.

In the SCVMM world a 'template' is composed of the following: a VHD with an OS that has been generalized (sysprep), virtual hardware profile (settings), and an OS profile.
The OS profile is required to have a product key. A MAC activation key at the minimum. But the key is required.
If you deploy a VM from a VHD, the same customization assumptions are not at play. Which is why it succeeds. (there is no template in this case, there is also no requirement that the OS in the VHD be sysprep'd).
SCVMM has rules. And lots of things don't make sense until you begin to understand them and play within them. (I am not saying that the SCVMM rules are a good thing, just saying they exist)
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Windows Server 2008 SP2 X86 Product Key Issue

I am trying to create a VM using a Template, but facing an issue with respect to Product Key. The VHD I am using is of
Windows Server 2008 SP2 X86. If I do not provide Product Key in the Template/Guest OS Profile, the Virtual Machine creation fails even before starting. Seeing this behavior, I added a dummy key to the Guest OS Profile/Template which allowed
me to deploy the machine, but the VM gets stuck at Customization before failing. When I take the remote console of the VM, the Error I see at the Remote Console is:
Windows could not parse or process the unattend answer file for pass. The settings specified in the answer files cannot be applied. The error was detected while processing settings for component [microsoft-windows-shell-setup]"
So, I am confused now what to do.
Is dummy key supported?
Do I need to provide the actual key in the Template/Guest OS Profile?

You should be able to evaluate this software for 180 days.
Here are some info:
http://portal.sivarajan.com/2010/10/windows-2008-r2-evaluation-period-and.html
http://portal.sivarajan.com/2010/08/verify-and-extend-windows-2008.html
Santhosh Sivarajan | MCTS, MCSE (W2K3/W2K/NT4), MCSA (W2K3/W2K/MSG), CCNA, Network+ Houston, TX
Blogs - http://blogs.sivarajan.com/
Articles - http://www.sivarajan.com/publications.html
Twitter: @santhosh_sivara - http://twitter.com/santhosh_sivara
This posting is provided AS IS with no warranties, and confers no rights.

How to install epm on window server 2008 sp2

Please , provide me some help - I am using window server 2008 sp2 and oracle 10g and hyperion 11, but I want to know the system requirements and steps to install EPM.
regards
Amit

Everything you need is at http://docs.oracle.com/cd/E17236_01/nav/portal_1.htm
Cheers
John
http://john-goodwin.blogspot.com/

Hotfix Compatibility: KB2522807 - Windows Server 2008 SP2

Can someone explain why this
Hotfix is not compatible with Windows Server 2008 SP2 when it states this is one of the OS prerequisites? There only seems to be a download for Windows Vista, 7 and 2008 R2 but not 2008 Standard.
I am seeing this exact issue on 2008 SP2 so would be nice to have the fix for it.
Thanks.

Hello,
according to
http://support.microsoft.com/hotfix/KBHotfix.aspx?kbnum=2522807&kbln=en-us this hotfix is for Windows Server 2008
R2 SP1
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

Windows Server 2008 SP2 randomly reboots due to lsass.exe failed with status code 255

Hello,
Any help on this issue would be greatly appreciated. I have an older Windows Server 2008 SP2 (I don't believe it is R2) (running SQL Server 2008 and SSRS 2008 on the machine) that is crashing randomly
during business hours. Looking into the event logs, I have found the following:
Faulting application lsass.exe, version 6.0.6002.18541, time stamp 0x4ec3ca01, faulting module msvcrt.dll, version 7.0.6002.18551, time stamp 0x4ee8d118, exception code 0xc0000005, fault offset 0x00000000000011ad, process id 0x284, application start
time 0x01d066d9669a3e1c.
A critical system process, C:\Windows\system32\lsass.exe, failed with status code 255. The machine must now be restarted.
The process wininit.exe has initiated the restart of computer RIDEDB02 on behalf of user for the following reason: No title for this reason could be found
Reason Code: 0x50006
Shutdown Type: restart
Comment: The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code 255. The system will now shut down and restart.
I found a Hot Fix for a similar issue (https://support.microsoft.com/en-us/kb/2732595?wa=wsignin1.0), but it appeared to only be applicable to Windows Server 2008 R2 and Windows 7.
A few hours later, the crash happened again, with a slightly different error:
The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code -1073741819. The system will now shut down and restart.
Faulting application lsass.exe, version 6.0.6002.18541, time stamp 0x4ec3ca01, faulting module msvcrt.dll, version 7.0.6002.18551, time stamp 0x4ee8d118, exception code 0xc0000005, fault offset 0x00000000000011ad, process id 0x284, application start
time 0x01d066fa9d74c5d7.
A critical system process, C:\Windows\system32\lsass.exe, failed with status code c0000005. The machine must now be restarted.
The security package Kerberos generated an exception. The exception information is the data
I have been unable to find a reason for these exceptions and the server rebooting. Any thoughts or ideas on how I can correct this error so it doesn't reboot our server again? .
Thank you,
Ben

Hello,
Any help on this issue would be greatly appreciated. I have an older Windows Server 2008 SP2 (I don't believe it is R2) (running SQL Server 2008 and SSRS 2008 on the machine) that is crashing randomly
during business hours. Looking into the event logs, I have found the following:
Faulting application lsass.exe, version 6.0.6002.18541, time stamp 0x4ec3ca01, faulting module msvcrt.dll, version 7.0.6002.18551, time stamp 0x4ee8d118, exception code 0xc0000005, fault offset 0x00000000000011ad, process id 0x284, application start
time 0x01d066d9669a3e1c.
A critical system process, C:\Windows\system32\lsass.exe, failed with status code 255. The machine must now be restarted.
The process wininit.exe has initiated the restart of computer RIDEDB02 on behalf of user for the following reason: No title for this reason could be found
Reason Code: 0x50006
Shutdown Type: restart
Comment: The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code 255. The system will now shut down and restart.
I found a Hot Fix for a similar issue (https://support.microsoft.com/en-us/kb/2732595?wa=wsignin1.0), but it appeared to only be applicable to Windows Server 2008 R2 and Windows 7.
A few hours later, the crash happened again, with a slightly different error:
The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code -1073741819. The system will now shut down and restart.
Faulting application lsass.exe, version 6.0.6002.18541, time stamp 0x4ec3ca01, faulting module msvcrt.dll, version 7.0.6002.18551, time stamp 0x4ee8d118, exception code 0xc0000005, fault offset 0x00000000000011ad, process id 0x284, application start
time 0x01d066fa9d74c5d7.
A critical system process, C:\Windows\system32\lsass.exe, failed with status code c0000005. The machine must now be restarted.
The security package Kerberos generated an exception. The exception information is the data
I have been unable to find a reason for these exceptions and the server rebooting. Any thoughts or ideas on how I can correct this error so it doesn't reboot our server again? .
Thank you,
Ben

RH Server 9 compatibility with Windows Server 2008 SP2/SQL Server

Our tech support people are preparing for a first install of RH Server 9. They have asked me to find out whether there is a recent patch that would enable it to work with Windows Server 2008 SP2 64 bit and MS SQL Server 2008.
If there is not yet a patch, will there be one for this OS/DB combination in the future, and when?
This is in reference to the knowledgebase article at http://kb2.adobe.com/cps/884/cpsid_88483.html which gives a "not recommended" status to this combination.
Our infrastructure team would prefer to use this combination if it is possible.
Second question from the tech team: Do we need to separate the RoboHelp application from the database or can they both reside on the same server?

To answer your first question, no there is no patch to allow SQL Server 2008 to run on a 64 bit server. To answer your second question, I don't know. This is a user to user forum and therefore we are not party to any discussions on when or if a patch will be released. You could sumbit a feature request which the Adobe RoboHelp Product Manager will get. This will help advance your case. You can submit it here:
http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
The RoboColum(n)
@robocolumn
Colum McAndrew

Windows server 2008 sp2 andoracle database 10g r2

We have created a server with windows server 2008 sp2, installing various roles, active directory, domain, dhcp server, dns server, some others, and various functionalities, and all works fine.
After all of this we are trying to install oracle database 10g, 'cause compatibiliy with an already existing db running at the moment under this database platform, using oracle universal installer, and when the launcer starts the procedure oracle database configuration assistant its windows come out and after just the 2% of the procedure it stops with ora-12560 error.
Before this not any kind of error appear.
the windows firewall security windows that appears, just 2, are unlocked by clicking the unlock button.
All seems configured right.
The listener service, oracleoradb10g_home1tnslistner, seems configured right, automatically configured from the setup procedure just before the oracle database configuration assistant, and is running.
This is the only one service created and running, at this point of the installation, from oracle.
the global database we are trying to create is named orcl, but in any place this name is found at the moment that the installation stops.
I hope that someone can help with this 'cause are 5 days that we are blocked with the installation and can't install the server in its environment.
We are desperates.

At this link
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10203vista.html
it says server and client for windows 2008 not just client.
Not only.
If I install this with no creation of the active directory and the domain, with all the rest, the installation work till the end without any error.
And anyway the error i reported in the first post happen the same, exactly the same point of the installation, with the 11g version too.
Waiting and hoping can be helped
Best regards.

AD Management Gateway Service for Windows Server 2008 SP2

Hey,
I'm having the same issue as in this thread.
https://social.technet.microsoft.com/forums/windowsserver/en-US/93be1866-8aa8-4004-be95-113b7a4faef2/ad-management-gateway-service-for-windows-server-2008-sp2
And trying to follow the 5 step procedure listed in the 3rd post, but am stuck on step 5, getting the hotfix from Microsoft. The link posted from the Hotfix page is just a generic Microsoft Support page. Which is not helpful. How do I actually contact them
(phone # or email address) to get the software?
Thanks In Advance,

No luck. I've tried the chat which asks which Windows version Im using and there's no Server 2008 only desktop versions. I called and after talking with 3 people I got cut off. There has to be an easier way to get a simple file downloaded.
You can hire me to do it for you. I am always successful at contacting MS Support.
You didn't follow the instructions I posted.
Reach us over the phone at 1-800-642-7676 (TTY: 1-800-892-5234)
http://smallbusiness.support.microsoft.com/en-us/contact/
Click Technical Support for Chat.
GREAT BIG BLUE BUTTON SAYS "Technical Support" - CLICK IT AND SELECT WINDOWS SERVER AT THE BOTTOM OF THE LIST.
It is really that easy.
¯\_(ツ)_/¯

Windows Server 2008 SP2 stops responding as multiple services timeout

There is another thread open under the "General" section. I was asked to post it here. I have left the other thread open because I believe this is not just applicable to the Remote Desktop Services Role. (http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/94b0d7f7-6a26-4795-8c1f-ffee1ac309aa/)
Hey everyone,
I have now seen this issue happen on multiple Windows Server 2008 Terminal server setups. The services that time out are not exactly the same across all the servers, but a number of them are the same on all of them.
Here are the lists of services that timed out on one of these servers, along with the time it happened.
80237AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the AudioEndpointBuilder service.
80307AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the BITS service.
80237AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the CertPropSvc service.
80407AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the CryptSvc service.
80437AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the Netman service.
80507AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the NlaSvc service.
80537AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the RasMan service.
80607AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the Schedule service.
80637AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the seclogon service.
80707AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the ShellHWDetection service.
80737AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the UmRdpService service.
80807AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the UxSms service.
80837AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the WinVNC4 service.
80851AM - The Terminal Server security layer detected an error in the protocol stream and has disconnected the client.
80907AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the WPDBusEnum service.
80938AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the wuauserv service.
81008AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the ShellHWDetection service.
In the end, the server has to be restarted for us to access it and for users to connect to it.
Doing some research, I cam across this KB article (http://support.microsoft.com/kb/972596/), but not sure if it applies to this situation. I have seen
other people post about this issue, but haven't come across anything that states the cause and resolution.
Has anyone else faced this or is facing it at the moment?
Any tips or suggestions would be great!
Thanks a lot!
Warm regards,
Sri

There is another thread open under the "General" section. I was asked to post it here. I have left the other thread open because I believe this is not just applicable to the Remote Desktop Services Role. (http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/94b0d7f7-6a26-4795-8c1f-ffee1ac309aa/)
Hey everyone,
I have now seen this issue happen on multiple Windows Server 2008 Terminal server setups. The services that time out are not exactly the same across all the servers, but a number of them are the same on all of them.
Here are the lists of services that timed out on one of these servers, along with the time it happened.
80237AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the AudioEndpointBuilder service.
80307AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the BITS service.
80237AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the CertPropSvc service.
80407AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the CryptSvc service.
80437AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the Netman service.
80507AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the NlaSvc service.
80537AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the RasMan service.
80607AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the Schedule service.
80637AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the seclogon service.
80707AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the ShellHWDetection service.
80737AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the UmRdpService service.
80807AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the UxSms service.
80837AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the WinVNC4 service.
80851AM - The Terminal Server security layer detected an error in the protocol stream and has disconnected the client.
80907AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the WPDBusEnum service.
80938AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the wuauserv service.
81008AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the ShellHWDetection service.
In the end, the server has to be restarted for us to access it and for users to connect to it.
Doing some research, I cam across this KB article (http://support.microsoft.com/kb/972596/), but not sure if it applies to this situation. I have seen
other people post about this issue, but haven't come across anything that states the cause and resolution.
Has anyone else faced this or is facing it at the moment?
Any tips or suggestions would be great!
Thanks a lot!
Warm regards,
Sri
I have exactly same problem with my two Terminal Servers (Windows 2008 SP2) and I dont find any resolution.Andre Fogaça

Toad for Oracle 10.1 on Windows Server 2008 SP2 64-bit

Hello guys,
I want to ask your opinion regarding an issue?
I want to install the Toad for Oracle application on my machine
(Windows Server 2008 Enterprise SP2 64-bit)
I have already installed Oracle DB 11g R2 64-bit for Windows.
I have tried to install Toad for Oracle version 10.1.1.8 making no use of any Oracle Client,
but it displays an error "Oracle Client not found!"
Now, I have read this article Oracle Home is not Valid on TOAD
and it says
>
TOAD required 32 bit Oracle client on 64 bit windows server systems
all you need is install Oracle 32 bit client, the toad will work.
>
I installed the 32 bit Oracle client, but now I'm getting
Ora-12154 TNS: could not resolve the connect identifier specifiedAny advice?

See the explanation here - Re: ORA-12154 could not resolve the connect indentifier specified
Srini

Get-Hotfix InstalledOn property not returning hotfix installed Date and Time on Windows Server 2008 SP2 but works on Windows Server 2008 R2 SP1

Hi,
I am working on a validation script to get the list of hotfixes installed on Domain Controllers every month as part of our monthly DC patching process. I have been successful in getting these details for DC's with (Windows Server 2008
R2 SP1, Powershell v2.0) using the below command.
Get-HotFix -cn $computer | Select-Object PSComputerName,HotFixID,Description,InstalledBy,InstalledOn | where InstalledOn -ge (Get-Date -Day 1 -Format d) | FT -AutoSize
I execute the above from a jump box with powershell v4.0 (Server 2008 R2)
However, when I try the same command from the jump box to query DC's with (Server 2008 SP2, powershell v2.0). It doesn't return the InstalledOn date and time. It was giving error for the InstalledOn property and hence I renamed it to $_.InstalledOn. Now
I don't get error but still no details displayed for InstalledOn property.
I tried using the below, as could see on few forums that this might resolve the issue. I also tried removing the "where" part but still no installation date returned.
Get-HotFix -cn $computer | Select-Object HotFixID, Description, InstalledBy, @{l="InstalledOn";e={[DateTime]::Parse($_.psbase.properties["installedon"].value,$([System.Globalization.CultureInfo]::GetCultureInfo("en-US")))}}
| where {$_.InstalledOn -ge (Get-Date -Day 1 -Format d)} | FT -AutoSize
Have tried this locally on the 2008 SP2 DC but still not working. Please advise what is going wrong?
Note: If I execute the below command locally on the 2008 SP2 DC, I am getting the InstalledOn output. However, when executed from the jump box with powershell v4.0 (Server 2008 R2) to query
the same 2008 SP2 DC, it just gives the prompt again without any error or output. This behavior is consistent for other 2008 SP2 DC's in the environment.
Get-HotFix -cn $computer | Select-Object HotfixID,Description,InstalledBy,InstalledOn | where {$_.InstalledOn -ge (Get-Date -Day 1 -Format d)} | FT -AutoSize

Hi jrv, I have already tried the Win32_QuickFixEngineering option, which doesn't work either. Apologies for not mentioning the workarounds that I have already tried.
Get-Hotfix seems to be just a wrapper for Win32_QuickFixEngineering as per the below article. (http://technet.microsoft.com/en-us/library/hh849836.aspx)
I have seen a mention of using the WU ActiveX control on few forums, but was too lazy to read it through.
After rigorous testing, it makes me realize that somewhere the Get-Hotfix dates formatting\comparison isn't working.

Error Code 0x80070035 - The network path was not found, Windows Server 2008 SP2

I have bee receiving following "error code 0x80070035 - The network path was not found" when trying to open file shares in both directions using Windows Server 2008 Standard SP2 at both ends. The issue is identical to the KB article KB958285, however the hotfix is only valid up to but not including SP2. One of the servers in question has moved several times between 2 subnets seperated by a VPN. I have tried changing settings in and around the local NIC/DNS Suffix and in the network connection sharing centre, but with no luck. Firewalls are turned off at both sites, and pings and AD queries are successful (one server is a DC). DNS is also working correctly at both sites. Any help/suggestions would be appreciated.
Richard

I thought I would add in another scenario, since this link came to the top of my list in the search engine.
We are running 2008 R2 with SP1 (it happened without SP1 as well)
We could not map using UNC (IP, FQDN, or netbios name). We could ping access the other servers via other utils like event viewer and services.msc but just could not map.
In our case it turned out to be a VMWARE issue but we still had to make a regedit change first
You have to go to regedit HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\NetworkProvider\Order\
And add LanmanWorkstation to Providerorder
I found on a Citrix board that citrix has an issue with this as well
If you're running VM here is an additional step you should do as well
When you upgrade VMware Tools installed with HGFS from ESX 3.x to ESX 4.x, the HGFS driver may not get uninstalled properly. In this case, the virtual machine's network Provider Order tab in Network Connections
> Advanced > Advanced Settings displays incorrect information and the virtual machine may lose network connectivity.
To avoid this issue, uninstall VMware Tools 3.x before installing VMware Tools 4.x.
To workaround this issue, if you have already upgraded VMware Tools:
Click Start >
Run, type regedit, and click OK. The Registry Editor window opens.
Navigate to
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\NetworkProvider\Order\.
Delete the reference to
hgfs.
Reboot the virtual machine.
We found that if you strip out the HGFS, you do not have to reboot for the provider order tab to come back
I hope that this saves people a lot of time. I spent days researching this.
This was the solution for me on 2008 R2 DC w/ Exchange. I do not have VMWare installed but do have Hyper-V. Thank you so much!

Windows Server 2008 SP2 bluescreen, help me to decrypt the windbg rapport

I got a bluescreen like 5 times a week on a windows 2008 SP2 Server :
Stuff installed on it :
Arcserv 12.0 SP2 (old backup software) using SQL Server 2005.
Motorola scanner software (dunno exactly how it works but it communicates with SAP). I know it uses 3 services with 1 using WMI.
Here is the debug :
Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Windows\Minidump\Mini032514-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*C:\WebSymb*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (24 procs) Free x86 compatible
Product: Server, suite: Enterprise TerminalServer SingleUserTS
Built by: 6002.18881.x86fre.vistasp2_gdr.130707-1535
Machine Name:
Kernel base = 0x81e4e000 PsLoadedModuleList = 0x81f65c70
Debug session time: Tue Mar 25 18:35:35.191 2014 (UTC + 1:00)
System Uptime: 5 days 0:44:48.497
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 50, {a17f2268, 0, 81fca2bf, 0}
Probably caused by : ntkrpamp.exe ( nt!CmpCheckKey+61b )
Followup: MachineOwner
0: kd> !analyze -v
* Bugcheck Analysis *
PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: a17f2268, memory referenced.
Arg2: 00000000, value 0 = read operation, 1 = write operation.
Arg3: 81fca2bf, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 00000000, (reserved)
Debugging Details:
READ_ADDRESS: GetPointerFromAddress: unable to read from 81f85874
Unable to read MiSystemVaType memory at 81f65420
a17f2268
FAULTING_IP:
nt!CmpCheckKey+61b
81fca2bf 394724 cmp dword ptr [edi+24h],eax
MM_INTERNAL_CODE: 0
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: DRIVER_FAULT_SERVER_MINIDUMP
BUGCHECK_STR: 0x50
PROCESS_NAME: System
CURRENT_IRQL: 0
TRAP_FRAME: 939e79ec -- (.trap 0xffffffff939e79ec)
ErrCode = 00000000
eax=00000000 ebx=956e47dc ecx=899a2615 edx=00000035 esi=ae9fb090 edi=a17f2244
eip=81fca2bf esp=939e7a60 ebp=939e7a8c iopl=0 nv up ei pl zr na pe nc
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010246
nt!CmpCheckKey+0x61b:
81fca2bf 394724 cmp dword ptr [edi+24h],eax ds:0023:a17f2268=????????
Resetting default scope
LAST_CONTROL_TRANSFER: from 81e9bde4 to 81ee6292
STACK_TEXT:
939e79d4 81e9bde4 00000000 a17f2268 00000000 nt!MmAccessFault+0x10b
939e79d4 81fca2bf 00000000 a17f2268 00000000 nt!KiTrap0E+0xdc
939e7a8c 81fd081a 01000001 00a71240 009c3f70 nt!CmpCheckKey+0x61b
939e7abc 81fd0e48 ae9fb090 01000001 00000006 nt!CmpCheckRegistry2+0x8c
939e7b04 81fcb86e 01000001 939e7c60 800044dc nt!CmCheckRegistry+0xf5
939e7b60 81fcdfdd 939e7bb4 00000005 00000000 nt!CmpInitializeHive+0x4c1
939e7bd8 81fd027d 939e7c60 00000000 939e7c4c nt!CmpInitHiveFromFile+0x19e
939e7c18 81fc64c5 939e7c60 00000000 939e7c7b nt!CmpCmdHiveOpen+0x36
939e7d14 81fc66fa 00000002 81f465a0 00000002 nt!CmpFlushBackupHive+0x2fd
939e7d38 820a5cbd 81f5013c 8a456d78 81ef3d4a nt!CmpSyncBackupHives+0x90
939e7d44 81ef3d4a 00000000 00000000 8a456d78 nt!CmpPeriodicBackupFlushWorker+0x32
939e7d7c 8202401c 00000000 1a045bd5 00000000 nt!ExpWorkerThread+0xfd
939e7dc0 81e8ceee 81ef3c4d 00000001 00000000 nt!PspSystemThreadStartup+0x9d
00000000 00000000 00000000 00000000 00000000 nt!KiThreadStartup+0x16
STACK_COMMAND: kb
FOLLOWUP_IP:
nt!CmpCheckKey+61b
81fca2bf 394724 cmp dword ptr [edi+24h],eax
SYMBOL_STACK_INDEX: 2
SYMBOL_NAME: nt!CmpCheckKey+61b
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrpamp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 51da1840
FAILURE_BUCKET_ID: 0x50_nt!CmpCheckKey+61b
BUCKET_ID: 0x50_nt!CmpCheckKey+61b
Followup: MachineOwner
And here is 2 warning i got on event :
Event ID 5612 Source : WMI (in applications). Didn't find anything to correct that
Windows Management Instrumentation a arrêté WMIPRVSE.EXE, car un quota a atteint une valeur d’avertissement. Quota : HandleCount Valeur : 4122 Valeur maximale : 4096 WMIPRVSE PID : 4292
Event ID 2012 source : srv
Le serveur a rencontré une erreur réseau lors de la transmission ou la réception de données. Des erreurs occasionnelles sont attendues mais en trop grand nombre cela indique une erreur possible de la configuration réseau. Le code de statut de l'erreur est
contenu dans les données renvoyées (formaté sous Word) et peut vous donner des indications sur l'origine du problème.
Sorry for the french on thoses error message but the OS is in french.
if someone got a clue to help me on that issue.

Hi,
This Forum is not the best place for dump file analyzing. It‘s suggested to contact Microsoft Customer Support
Services (CSS) so that a dedicated Support Professional can help you on this issue.
To obtain the phone numbers for specific technology request, please refer to the website listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;PHONENUMBERS¡¯
If you are outside the US, please refer to
http://support.microsoft.com for regional support phone numbers.
Thanks for your understanding.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows Server 2008 sp2 Task Scheduler missing next run time after restart

Similar Messages

Maybe you are looking for