Windows Server 2008/SQL 2008 support?

Does the latest release of Business Object support MS Windows Server 2008 and SQL server 2008? We are currently running BO 11.5R2 and would like to upgrade to the latest version. Since we are also upgrading our servers to the latest 2008 versions of Windows Server and SQL server, it would be nice to know if we can install this to our new hardware.
Thanks,
Peter

XI 3.1 or later supports both. See the [supported platforms|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/60cdb229-d874-2b10-18ac-ed2f46873753&overridelayout=true] for more info
Regards,
Tim

Similar Messages

Unable to install SQL server 2008 r2 standard edition on windows server 2008 r2 sp1

I am unable to install sql server 2008 r2 standard edition on windows server 2008 r2 sp1.
On the Setup Support Files page, choose Install this step I don't get any other window i.e. nothing happens I waited for 5-10 min. Then I checked the log file.
Final result:                  Failed: see details below
Exit code (Decimal):           -2068053929
Exit facility code:            1212
Exit error code:               87
Exit message:                  Failed: see details below
Start time:                    2014-03-18 14:59:31
End time:                      2014-03-18 15:00:25
=== Verbose logging started: 3/19/2014 9:45:47 Build type: SHIP UNICODE 5.00.7601.00 Calling process: E:\SQL Server 2008 R2 Standard\x64\setup100.exe ===
MSI (c) (10:34) [09:45:47:496]: Note: 1: 2203 2: E:\SQL Server 2008 R2 Standard\x64\redist\watson\dw20sharedamd64.msi 3: -2147287038
MSI (c) (10:34) [09:45:47:496]: MsiOpenPackageEx is returning 2.
=== Verbose logging stopped: 3/19/2014 9:45:47 ===
Please help As i am running out of time as i have to upgrade TFS for that first step is to install SQL server.

Hello,
The following are a few things you can try:
Copy the media to the local disk drive, unzip it (in case you are installing from an ISO file, and run SQL Server setup from there.
Try to unregister and register the Windows Installer with the following two commands:
msiexec /unregister
msiexec /regserver
Try to use Process Monitor to log the detailed error produced when the installation of dw20sharedamd64.msi fails. You can download Process Monitor from the following link:
http://technet.microsoft.com/en-us/sysinternals/bb896645
Share with us the error captured by Process Monitor.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Windows update KB2964444 broke Event Logging Service and SQL Agent Service on Windows Server 2008 R2

I got the following problem:
I discovered that on my Windows Server 2008R2 machine the event logging stopped working on 04/May/2014 at 03:15.
Also, SQL Agent Service won't run
The only change that day was security
update KB2964444 - Security
Update for Internet Explorer 11 for Windows Server 2008 R2for x64-based Systems, that was installed exactly 04/May/2014 at 03:00. Apparently, that's what broke my machine...
When I try to start Windows Event Log via net
start eventlog or via Services
panel, I get an error:
C:\Users\Administrator>net start eventlog
The Windows Event Log service is starting.
The Windows Event Log service could not be started.
A system error has occurred.
System error 2 has occurred.
The system cannot find the file specified.
I tried:
restarted the OS (virtual on the host's VMWare).
re-checked the settings in services menu -they are like in the link.
checked the identity in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\eventlog -
the identity is NT
AUTHORITY\LocalService
gave all Authenticated Users full access to C:\Windows\System32\winevt\Logs
ran fc /scannow - Windows Resource Protection did not find any integrity violations.
went to the file %windir%\logs\cbs\cbs.log -
all clean, [SR] Repairing 0 components
EDIT: Uninstalled the recent system updates and rebooted - didn't help
EDIT: Sysinternals Process Monitor results when running start service from services panel (procmon in elevated mode):
filters:
process name is svchost.exe : include
operation contains TCP : exclude
the events captured are:
21:50:33.8105780 svchost.exe 772 Thread Create SUCCESS Thread ID: 6088
21:50:33.8108848 svchost.exe 772 RegOpenKey HKLM SUCCESS Desired Access: Maximum Allowed, Granted Access: Read
21:50:33.8109134 svchost.exe 772 RegQueryKey HKLM SUCCESS Query: HandleTags, HandleTags: 0x0
21:50:33.8109302 svchost.exe 772 RegOpenKey HKLM\System\CurrentControlSet\Services REPARSE Desired Access: Read
21:50:33.8109497 svchost.exe 772 RegOpenKey HKLM\System\CurrentControlSet\Services SUCCESS Desired Access: Read
21:50:33.8110051 svchost.exe 772 RegCloseKey HKLM SUCCESS
21:50:33.8110423 svchost.exe 772 RegQueryKey HKLM\System\CurrentControlSet\services SUCCESS Query: HandleTags, HandleTags: 0x0
21:50:33.8110705 svchost.exe 772 RegOpenKey HKLM\System\CurrentControlSet\services\eventlog SUCCESS Desired Access: Read
21:50:33.8110923 svchost.exe 772 RegQueryKey HKLM\System\CurrentControlSet\services\eventlog SUCCESS Query: HandleTags, HandleTags: 0x0
21:50:33.8111257 svchost.exe 772 RegOpenKey HKLM\System\CurrentControlSet\services\eventlog\Parameters SUCCESS Desired Access: Read
21:50:33.8111547 svchost.exe 772 RegCloseKey HKLM\System\CurrentControlSet\services SUCCESS
21:50:33.8111752 svchost.exe 772 RegCloseKey HKLM\System\CurrentControlSet\services\eventlog SUCCESS
21:50:33.8111901 svchost.exe 772 RegQueryValue HKLM\System\CurrentControlSet\services\eventlog\Parameters\ServiceDll SUCCESS Type: REG_SZ, Length: 68, Data: %SystemRoot%\System32\wevtsvc.dll
21:50:33.8112148 svchost.exe 772 RegCloseKey HKLM\System\CurrentControlSet\services\eventlog\Parameters SUCCESS
21:50:33.8116552 svchost.exe 772 Thread Exit SUCCESS Thread ID: 6088, User Time: 0.0000000, Kernel Time: 0.0000000
NOTE: previoulsy, for
21:46:31.6130476 svchost.exe 772 RegQueryValue HKLM\System\CurrentControlSet\services\eventlog\Parameters\ServiceDll SUCCESS Type: REG_SZ, Length: 68, Data: %SystemRoot%\System32\wevtsvc.dll
I also got NAME
NOT FOUND error ,so I created the new string value for the Parameters with
the name ServiceDll and
data %SystemRoot%\System32\wevtsvc.dll (copied
from the upper HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\eventlog key)
and this event now is
21:46:31.6130476 svchost.exe 772 RegQueryValue HKLM\System\CurrentControlSet\services\eventlog\Parameters\ServiceDll SUCCESS Type: REG_SZ, Length: 68, Data: %SystemRoot%\System32\wevtsvc.dll
I also checked for the presence of wevtsvc.dll in
the place and it's there.
Also, I tried to capture all events with path containing 'event' and
got following events firing every several seconds:
21:38:38.9185226 services.exe 492 RegQueryValue HKLM\System\CurrentControlSet\services\EventSystem\Tag NAME NOT FOUND Length: 16
21:38:38.9185513 services.exe 492 RegQueryValue HKLM\System\CurrentControlSet\services\EventSystem\DependOnGroup NAME NOT FOUND Length: 268
21:38:38.9185938 services.exe 492 RegQueryValue HKLM\System\CurrentControlSet\services\EventSystem\Group NAME NOT FOUND Length: 268
Also, I tried to capture all the events containing 'file',
excluding w3wp.exe,
chrome.exe, wmiprvse.exe, wmtoolsd.exe, System and it shows NO attempts to access any file ih the time I try to start
the event logger (if run from cmd - there are several hits by net executable,
not present if run from the panel).
What can be done?

Hi,
I don’t found the similar issue, if you have the IE 11 please try to update system automatic or install the MS14-029 update.
The related KB:
MS14-029: Security update for Internet Explorer 11 for systems that do not have update 2919355 (for Windows 8.1 or Windows Server 2012 R2) or update 2929437 (for Windows 7
SP1 or Windows Server 2008 R2 SP1) installed: May 13, 2014
http://support.microsoft.com/kb/2961851/en-us
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Update error of SQL Server 2012 enterprise running on Windows server 2008 standard SP2 (32 bits)

Hi there;
I have a windows server 2008 SP2 (32bits) in which I have an instance of SQL Server
2008 and another of 2012.
My Windows server 2008 installed the following updates; (see below).
(KB2898858),(KB2909921),(KB890830),(KB2898869),(KB2911502),(KB2901126),
(KB2916036),(KB2862973),(KB2901113)
After the machine was re-started, I was not abble to connect
to the instance of SQL Server 2012. I am able
to connect to the instance of SQL Server 2008.
The error message I get when I atemp to connect can be found
at the end of the list of updates below.
Do I need to uninstall an update? if so, which one and how do I do that?
Thanks Gabriel I. Ruiz
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 x86 (KB2898858)
Installation date: ‎2/‎12/‎2014 11:42 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2898858
Cumulative Security Update for Internet Explorer 9 for Windows Server 2008 (KB2909921)
Installation date: ‎2/‎12/‎2014 11:42 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2909921
Windows Malicious Software Removal Tool - February 2014 (KB890830)
Installation date: ‎2/‎12/‎2014 11:41 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/890830
Security Update for Microsoft .NET Framework 4.5.1 on Windows 7, Windows Vista and Windows Server 2008 x86 (KB2898869)
Installation date: ‎2/‎12/‎2014 11:40 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2898869
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 x86 (KB2911502)
Installation date: ‎2/‎12/‎2014 11:36 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2911502
Security Update for Microsoft .NET Framework 4.5.1 on Windows 7, Windows Vista, and Windows Server 2008 x86 (KB2901126)
Installation date: ‎2/‎12/‎2014 11:36 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2901126
Security Update for Windows Server 2008 (KB2916036)
Installation date: ‎2/‎12/‎2014 11:34 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2916036
Security Update for Windows Server 2008 (KB2862973)
Installation date: ‎2/‎12/‎2014 11:34 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2862973
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 x86 (KB2901113)
Installation date: ‎2/‎12/‎2014 11:34 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2901113
===================================
Cannot connect to HAVANA\HAVANA_2012_1ST.
===================================
The client was unable to establish a connection because of an error during connection initialization process before login. Possible causes include the following: the client tried to connect to an unsupported version of SQL Server; the server was too busy
to accept new connections; or there was a resource limitation (insufficient memory or maximum allowed connections) on the server. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=233&LinkId=20476
Server Name: HAVANA\HAVANA_2012_1ST
Error Number: 233
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParserStateObject.SNIWritePacket(SNIHandle handle, SNIPacket packet, UInt32& sniError, Boolean canAccumulate, Boolean callerHasConnectionLock)
at System.Data.SqlClient.TdsParserStateObject.WriteSni(Boolean canAccumulate)
at System.Data.SqlClient.TdsParserStateObject.WritePacket(Byte flushMode, Boolean canAccumulate)
at System.Data.SqlClient.TdsParser.SendPreLoginHandshake(Byte[] instanceName, Boolean encrypt)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
No process is on the other end of the pipe

Hi,
Check if SQL Server service is running fine. I doubt you may have changed the user account password used for SQL Server service. After restarting the machine, you also need to update the user account of SQL Server service in Configuration
Manager. Re-type the user account name and password under Log on tab and see how it helps.
Thanks.
Tracy Cai
TechNet Community Support

Install Active Directory Domain Controller on Windows server 2008 enterprise, dont login on Sql Server 2008 R2

I install Active Directory Domain Controller on Windows server 2008 enterprise and dont login on Sql Server 2008 R2. Before install ADDC, I have logon SQL Server 2008r2 Success, After when i install ADDC is don't logon on SQL Server 2008r2 -->not success.
I have uninstalled ADDC but i still can't login on SQL server 2008r2.
please help me. it is very very disaster!
I think is loss account SQL server 2008r2!

Hello,
I stronly recommend you post the detail error message to us while you try to connect to SQL Server instance, it's useful for us to do further investigation.
Microsoft recommends that you do not install SQL Server 2008 R2 on a domain controller, there are some limitations:
You cannot run SQL Server services on a domain controller under a local service account or a network service account.
After SQL Server is installed on a computer, you cannot change the computer from a domain member to a domain controller. You must uninstall SQL Server before you change the host computer to a domain controller.
After SQL Server is installed on a computer, you cannot change the computer from a domain controller to a domain member. You must uninstall SQL Server before you change the host computer to a domain member.
SQL Server failover cluster instances are not supported where cluster nodes are domain controllers.
SQL Server Setup cannot create security groups or provision SQL Server service accounts on a read-only domain controller. In this scenario, Setup will fail.
On Windows Server 2003, SQL Server services can run under a domain account or a local system account.
So, I would suggest you try to open up Windows Services list and changed the account for SQL Server service.
Regards,
Elvis Long
TechNet Community Support

How to enable high availability on SQL Server 2005 with Windows Server 2008 Enterprise R2

Dear Folks,
I would like to ask you about this thing. I'm working for IT department for bank in Myanmar. Our bank have up to 96 branches across all of Myanmar including H.O. We are using Microsoft SQL Server 2005 with Windows Server 2008 for our banking
information system. My main problem is having to backup and restore the database backup files every time the servers in branches goes down for whatever reasons. I want to deploy this feature of high availability and failover cluster using Windows Server 2008
and SQL Server 2005. Our branches have 2 Servers. One is for Primary and other is for Backup. What I want to do is that, I want to change Backup Server to Primary Server whenever the Primary Server goes down for whatever reasons. All the working data and databases
from Primary will immediately replicated into Backup Server along with all the IP information of Primary Server. Please give me step by step guide for this process.

Try below
http://blogs.msdn.com/b/cindygross/archive/2009/10/23/checklist-for-installing-sql-server-2005-as-a-clustered-instance.aspx
I will recommend you to upgrade SQL server to newer version for support as well as flexibility.
Regards,
Vishal Patel
Blog: http://vspatel.co.uk
Site: http://lehrity.com

IDM 7.2 under Windows Server 2008 R2 (SQL Server ): Which NTW ? Which JVM ?

Hello,
We are installing IDM 7.2 under Windows Server 2008 R2 using the database SQL Server 2008 R2.
1/ Which NetWeaver should we use to install the Java Application Server (NTW 7.3 or NTW 7.2)?
Using install guides 7.2rev8, we tried NTW 7.3 but it comes with JVM 1.6 that isn't supported, according to the PAM.
Should we install the AS Java with NTW 7.2 that comes with JVM 1.5 (JVM 1.5 being supported)?
2/ Has someone installed IDM 7.2 under Windows Server 2008 R2 (SQL Server)?
If yes, which NTW was used (7.2 or 7.3)? Which JVM was used (1.5 or 1.6)? Which JDBC drivers (1.2 or 3)?
Thanks a lot for your replies,
Regards.

{quote)For the Java RE are you using 32 or 64 bytes ?{quote)
C:\Users\Administrator>java -version
java version "1.6.0_30"
Java(TM) SE Runtime Environment (build 1.6.0_30-b12)
Java HotSpot(TM) 64-Bit Server VM (build 20.5-b03, mixed mode)
{quote)Which JDBC driver do you use (1.2 or 3.0) ?{quote)
{quote)In the IDM Identity Center, for the dispatchers option tools, how do you fill it ?
We are using :
Path to java exe: E:\usr\sap\ID1\J00\exe\sapjvm_6\bin\java.exe{quote)
C:\Program Files\Java\jre6\bin\java.exe
{quote)Path to jvm.dll: E:\usr\sap\ID1\J00\j2ee\JSPM\sapjvm\jre\bin\server\jvm.dll{quote)
C:\Program Files\Java\jre6\bin\server\jvm.dll
{quote)JDBC driver jar: D:\Microsoft SQL Server JDBC Driver 3.0\sqljdbc_3.0\enu\sqljdbc4.jar{quote)
C:\sqljdbc\sqljdbc4.jar
{quote)JDBC driver names: xxxxxxxxx (can you write us what you use){quote)
com.microsoft.sqlserver.jdbc.SQLServerDriver
{quote)CLASSPATH extension: D:\Microsoft SQL Server JDBC Driver 3.0\sqljdbc_3.0\enu\sqljdbc4.jar{quote)
No Classpath specified

ECC 6/MS Windows Server 2008/SQL Server 2008 Upgrade

I am working with a client who wishes to do an ECC upgrade from ECC 5 to ECC 6. They also wish to upgrade the Op System from Windows Server 2003 to Windows Server 2008; and the database from MS SQL 2005 to MS SQL 2008.
My proposal is to Upgrade ECC, then the Op System then the DB in each environment before moving forward. We would do the first upgrade in Sandbox to determine timing, issues, etc. We would create a production support path to be used during the project, then start the upgrades Dev-QA-Prod.
The client has said that this is a risky approach and that SAP recommends a 2 step process, that is, upgrade ECC 6 thru all environments and then go back and do the Op Sys and Db upgrades afterward.
In my mind my approach is less risky as we will ensure each environment is clean and functioning smoothly before moving forward; there is less intrusion to the end user; testing is only accomplished once in each environment. The actual production build would be split over 2 weekends, app upgrade first then op sys and db.
The assistance I need to understand isu2026.does SAP have a recommendation in this case? I have not seen anything that says not to do the single step process I am recommending.
Thanks for any support you can provide.

Hi,
If SAP is recomending that is because They recomends not to "mix" upgrades with any other process like Heterogeneous system copies, DB upgrades, etc. In fact this is in the upgrade guides. But I think like some others here has already writen, that you could upgrade and change OS and SQL server in two different steps but in the same process so the downtime will be longer but it will be only one.
Of course this will depend on how long your upgrade downtime will take because usually the upgrade could take 7 hours more or less, post upgrade tasks, export task (R3load), change OS and SQL server if not using different HW, import task and post copy tasks.
What is the maximun downtime your client is ready to tolerate? If you have a whole weekend beginning from friday afternoon and ending Monday morning probably you will have enough time to do all in one weekend but again, it will depend on your tests. Why don´t you talk to your client and tell them if they have new HW already for this project to do a Prod copy in one of those servers as part of the whole project and take the times you will need. Then with that in perspective you could decide what approach is better.
With some upgrades done under my belt to different clients I don´t assure anything until I do a test upgrade including all changes (os or DB) necesary to finish time schedules, then with that in mind then we can redefine the way we will use and we make that clear before the beginning of the project. I always tell them that it is better to do a test like this if they don´t have much available downtime, the project will take longer but for sure the Production downtime will be shorter.

RH Server 9 compatibility with Windows Server 2008 SP2/SQL Server

Our tech support people are preparing for a first install of RH Server 9. They have asked me to find out whether there is a recent patch that would enable it to work with Windows Server 2008 SP2 64 bit and MS SQL Server 2008.
If there is not yet a patch, will there be one for this OS/DB combination in the future, and when?
This is in reference to the knowledgebase article at http://kb2.adobe.com/cps/884/cpsid_88483.html which gives a "not recommended" status to this combination.
Our infrastructure team would prefer to use this combination if it is possible.
Second question from the tech team: Do we need to separate the RoboHelp application from the database or can they both reside on the same server?

To answer your first question, no there is no patch to allow SQL Server 2008 to run on a 64 bit server. To answer your second question, I don't know. This is a user to user forum and therefore we are not party to any discussions on when or if a patch will be released. You could sumbit a feature request which the Adobe RoboHelp Product Manager will get. This will help advance your case. You can submit it here:
http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
The RoboColum(n)
@robocolumn
Colum McAndrew

Windows Server 2008 and SQL Server 2008 R2 - ?? for replication with Oracle

Hello:
I am running Windows Server 2008 and SQL Server 2008 R2 - 64 bit
I need to replicate data between the SQL 2008 and Oracle 11.2 ?? with Oracle being the publisher
I also would lile SqlPlus installed on the server.
I need a definite answer as to what I should download from the Oracle download area. There are just so many packages and so many version I dont know what to download.
Thanks

Hi,
Currently Microsoft Windows Server 2008 and SQL Server 2008 are not supported for SAP Business One.
For detailed information about all supported platforms, we have the following link for your reference:
www.service.sap.com/smb/sbo >product availability > supported platforms.
Regarding the information on the service marketplace this is updated on a regular basis and provides the most up to date information regarding the supported platforms for Business One.
Platforms not mentioned in this documentation are not supported.
hope it helps,
Regards,
Ladislav
SAP Business One Forum Team

How uninstall WSUS server role from Windows Server 2008 R2 with database hosted on remote SQL server?

Hello,
I'm looking to uninstall the WSUS server role 3.0 from Windows Server 2008 R2 SP1. The thing is the database is hosted on a remote MS SQL server. I want to remove the database as well. I would like help for figuring out what I need to do to completely remove
WSUS and its database.
Any kind of help is appreciated! Thanks

Hi,
WSUS offers limited support for running database software on a computer that is separate from the computer where the rest of WSUS is installed. This section offers step-by-step
instructions for how to install WSUS in this configuration.
If you meet the uninstall issue with the normal uninstall, please post the detail information for us but if you just want to manage the WSUS related SQL data, you can refer
the following KB then delete corresponding database.
In the general procedure, you will create the related WSUS database as below::
Run WSUS Setup from the command line, using the SQLINSTANCE_NAME=servername\instancename command-line option, where servername is the name of the remote computer, and instancename
is the name of the SQL Server instance that you will use for WSUS.
More information:
Choose the Database Used for WSUS 3.0
http://technet.microsoft.com/en-us/library/cc708452(v=ws.10).aspx
Appendix B: Configure Remote SQL
http://technet.microsoft.com/en-us/library/cc708595(v=ws.10).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Cannot install SQL Server Native Client 2012 on Windows Server 2008 Data Center

Is it possible to install SQL Server Native Client 11.0 (SQL Server 2012) on Windows Server 2008 Datacenter?
I tried to install it, but I get this error message:
"Installation of this product failed because it is not supported on this operating system. For information on supported configurations, see the product documentation."
Based on this article (http://msdn.microsoft.com/en-us/library/cc280356.aspx), I see one of the supported operating system is Windows Server 2008.

Hello,
Can you try to download and install Windows Server 2008 Service Pack 2 from the following link, and then reinstall the SQL Server Native Client 11.0 again?
http://www.microsoft.com/en-in/download/details.aspx?id=16468
Microsoft SQL Server 2012 Native Client is included in the SQL Server 2012 Feature Pack. Based on the requirement of
the download page , you should apply SP2 for Windows Server 2008.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Windows Server 2008, IIS7, SQL Server 2005 - Will this work?

Hi,
Not super concerned about it being supported at this point, BUT, can I run/install CR XI SP2 on Windows Server 2008, IIS7, SQL Server 2005?
I've reference the System Requirement stuff and it was written before Server 2008 was released.
If it's possible, any help on what to install/not install would be great appreciated.
Thanks,
Mike

Try it. If it works great. As you are using ASP, your app must be using craxdrt.dll. This dll has been retired and no longer ships with CR 2008, so even when the next SP for CR 2008 releases, it will be of no use to you. If the ASP app does not work on the server, you may want to post your query to the Legacy Application Development SDKs forum:
SAP Crystal Reports - Legacy SDKs
and see if anyone can help.
Other than that, the only option will be to go to .NET once SP 1 releases for CR 2008, or use CR 10.5 which bundles with .NET 2008.
Ludek

What Drivers should I use to access SQL Server 2005 SP2 from Windows Server 2008 64 bit

and yes I do know that is an odd scenario so let me explain
I have just joined a project that is "in flight" where the customer is upgrading a LOT of things at the same time
(some Microsoft, some other supplier: some at the OS level, others at server or services levels)
the current step is replacing some services leaving the back end databases as they are
i.e. SQL Server 2005 SP2
a later step will upgrade the backend data bases which may make more work
What we have now runs on Windows Server 2003 32 bit using the OLEDB drivers
version 2000.86.3959.00
What we want must run on Windows Server 2008 64 bit still using the OLEDB option
which version should I download & try to install?

Here are a known list of issues with this configuration with their corresponding workarounds: https://support.microsoft.com/kb/936302/en-us
Satish Kartan www.sqlfood.com

How to install SQL server 2008 express on Windows server 2008 R2 standard OS

Hi,
I have Windows server 2008 R2 Standard edition (64-bit) and trying to install SQL server 2008 express edition since I do not have SQL server 2008. When I install it I am unable to see Management Studio so I am trying to install management studio as well
but still I am facing issue. Please let me know whether SQL server 2008 express edition is compatible with Windows server 2008 R2 Standard. If not then pls let me know the proper steps to install it.
Regds

Hello,
Service Pack 1 for SQL Server 2008 is required to be compatible with Windows Server 2008 R2.
Please download QL Server 2008 Express with SP1 included from the following link:
http://www.microsoft.com/en-us/download/details.aspx?id=25052
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Windows Server 2008/SQL 2008 support?

Similar Messages

Maybe you are looking for