Windows Server 2008 Standard 64Bit

We need Windows 2008 Standard 64 bit.
So please convert Windows 2008 Standard 32bit to Windows 2008 Standard 64bit.
Please send me the link of Windows 2008 Standard 64Bit ISO Image File
Regards
Sandeep Sahadevan

Media is not free. If you have a regular Microsoft reseller with whom you deal, you should contact them in order to purchase the media. Otherwise, you can contact Microsoft. This forum is not an official way to contact Microsoft.
At the bottom of this page you will see a Contact Us link. Follow that to contact Microsoft to see how you can obtain a copy of the distribution.
If you have a volume license agreement (any organization buying as few as five licenses from Microsoft should have such an agreement because that is when discounts start), then you can download it from the volume licensing site - you need credentials from
your license agreement.
. : | : . : | : . tim

Similar Messages

Error Installing InDesign CS3 Server on Windows Server 2008 R2 64BIT

Hello there-
I'm trying to install InDesign CS3 Server on Windows Server 2008 R2 64BIT (x64) Edition, however, we get a failure indication on the installer. Before, we have installed it properly on Windows Server 2008 R2 32BIT (x32) but some how we cannot proceed on a x64 box.
Is there any limitation on this sense? Any documentation about it?
Thanks and appreciate your answers.
Regards,
Gustavo Ortega
Software Engineer

Hello,
Have you followed these recommendations from the installation guide ( Installation Guide u2013 SAP Content Server on Windows 2008 ) :
Note: In the IIS 7.0/7.5, all the roles are not selected during the installation by default,
Please make sure all the below roles are included and IIS 7.0/7.5 is installed.
Roles needed in IIS 7.0/IIS 7.5.
Common HTTP Features
Static Content
Default Document
Directory Browsing
HTTP Errors
HTTP Redirection
Application Development
ISAPI Extensions
ISAPI Filters
Health and Diagnostics
HTTP Logging
Logging Tools
Request Monitor
Tracing
Custom Logging
ODBC Logging
Security
Basic Authentication
Windows Authentication
Request Filtering
Note : Anonymous Authentication should be enabled.
Performance
Static content Compression
Dynamic Content Compression
Management Tools
IIS Management Console
IIS Management Scripts and Tools
Management Service
IIS 6 Management Compatibility
IIS 6 Metabase compatibility
IIS 6 WMI Compatibility
IIS 6 Scripting Tools
IIS 6 Management Console
Note: There is a File Upload limitation in IIS 7 on Windows 2008 Server, IIS will reject any file that is
larger than 30 MB. This is a default limitation of IIS. You can increase the maximum file size by
setting the parameter maxAllowedContentLength in the file ApplicationHost.config.
The following command can be used to set the parameter from the command prompt, please
change the directory to Windows\System32\inetserv and then execute the command.
appcmd setconfig /section:requestFiltering/requestLimits.maxAllowedContentLength:150000000
The value is only an example, in this case the upload limit is set to 150MB.Server has to be restarted
after execution of this command.
Also, are you using Maxdb to store the files or is it a "flat files" content server ?
HTH.
Steve.

Oracle DB 10g XE on Windows Server 2008 R2 64bit

Hello to everybody!
I have and old pc with Windows Server 2003 (32 bit) where i've installed Oracle DB 10g XE. Everything works fine.
Now i have to migrate the DB from that old machine to a new one with Windows Server 2008 R2 64bit.
I've tryied to install the Oracle DB 10g XE into the new server but, after installation is finished, i wasn't able to open the DB homepage at http://127.0.0.1:8080/apex. It said "This page can't be displayed". I try with SQLPLUS but after i insert the admin credentials i obtain these lines:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Where can be the problem?

>> ORA-01034: ORACLE not available
Database is not running. Most likely the installer did not complete all its tasks, it can happen.
For windows, the database service has to be set up (see Start/Run/services.msc), services started, installer creates the database, and quite a few other setup chores. If the database creation fails, all the other stuff is not relevant.
Under the <drive:>oraclexe folder there *should* be a datafiles (*.DBF) files somewhere. Can't recall the exact location for 10g. Try file explorer and a search for *.dbf files, that will probably come up empty.
Note the requirements, at Oracle&reg; Database Express Edition it calls for x86, not x64. The 11g XE also has lots of trouble getting a successful install on x64 as well, note the Download page states "does not work on x64" although some folks have gotten it to work.Try the deinstall steps, and use a right click/run as Administrator that *might* get past the UAC glitch that happens on the later OS versions.

OBI11g installation on Windows Server 2008 R2 (64bit)

Hi,
Sorry to pick up this topic again, but my research in the forum and other inet sites doesn't help me so far and my installation will not work.
My Situation:
I have a Windows Server 2008 R2 (64bit) default installlation. The server (HyperV-managed) has 4 GB RAM.
I added a Loopback adaptor and set for the loopbackadapter a fixed IP (10.10.10.10 Subnet: 255.255.255.0).
Entered in the host file (127.0.0.1 localhost and 10.10.10.10 servername)
Installed JDK 64bit
Installed Oracle Client 32bit
Then I tried all three options:
1) Default OBIEE Installation --> start of coreapplication_obips1 has failed. Everything else was fine. I was not able to start the obips1 manually
2) Enterprise Installation --> start of coreapplication_obips1 has failed. Everything else was fine. I was not able to start the obips1 manually
3) Manually installed WebLogic 1033 --> SoftwareOnly installation of OBIEE --> manually start config of OBI Installation --> same result as above!
Perhaps you have some hints for me.
Cheers
Wolfgang

Not in the slightest - I installed five just the other week
All our virtual machines, running 2008 R2 x64. We went for Enterprise Edition, but I believe in CF9 they're both 64-bit anyway. These are the from the build notes I built up:
Install extra roles:
    Application Server
    Web Server (IIS)
      Application Development
      IIS6 METABASE Compatibility
Install extra Features:
    SMTP Service
Other than that nothing else needs doing. It's worth noting (as a slight but irritating aside) that in 2008 R2 the SMTP service is set to Manual not Automatic, so you'll want to change that unless you want your emails to stop every time you reboot the box.
But the actual install itself was far simpler than CF8 on 2008.
O.

Problem of SAPConsle 7.10 (Patch 13) on Windows server 2008 R2 (64bit)

My company is moving from server 2003 to Server 2008 R2 (64bit). We installed SAPConsole 7.10 (Patch level 13) on test server without any problem and configured the profiles in SAPConsole administrator. However when we running the sapcnsl.exe from command prompt, it prompt with error message "*** ERROR => ***AgCom (006FC558): Error: Internal error" and failed to get the SAP login screen.
I checked SAP Note 1043241 saying SAPConsole 710 as patch level 7 could support Windows server 2008 (32/64bit) both.
Can anyone help advise on my issue? or is there anyone has testl the SAPConsole 710 on Server 2008 R2 64bit successfully?
Thank you very much!

Hello Jackcd,
I am not an expert in this area but I did a message search for "AgCom error internal error" and I found a message where the customer solved the problem by using a patch. In the customers own words:
"I installed sapgui 7.10 Patch level 6 on the server where I installed SAPCONSOLE 7.10. Now, the sapconsole working."
The Sapinator

Windows 8.1 RDP Issues with Windows Server 2008 Standard.

I have an issue maintaining an RDP connection from 64-bit windows 8.1 (standard and pro) to 32-bit Windows Server 2008 Standard. Initial connection is normal, and as long as I am constantly typing on the link, for the most part it stays up. However
if I do not keep typing, or go to another desktop program for a few minutes, and then go back, the following happens:
If I am typing into notepad (or some screen that does not require windows to be refreshed) I can continue to do so, so the connection has not been lost, however if I try to do something that requires more extensive exchange of information (like file
- open, or even trying to pull up the start menu), the connection pauses with about half the screen refreshed, sometimes after about 30 seconds a bit more of the screen fills out, but otherwise the connection is not responsive. Then after about 2 minutes,
RDP reconnects, at which point I am back to "normal". I have conducted some tests and made inquiries of others attempting to connect to the server.
1) I can connect to other Windows (servers 2008 R2 and 2012) with no connection issues from this PC
2) I can connect to the 32-bit server with no issues using Windows Vista Ultimate and Windows 7 from the same location as the WIndows 8.1 PC
3) When I do a network speed test while having these issues I see full download and upload speeds, so I am not experiencing intermittent internet issues.
4) No-one else from other locations (not of course using Windows 8.1) has any issues using RDP to the 32-bit Windows Server Standard.
These various tests seem to eliminate my network connection, and other operating systems, from the equation, and point to RDP issues on windows 8.1 connecting to the older OS. I noticed in the September updates, a case 2989039 which seemed to point
to similar issues when using UDP through Remote Desktop Gateway. That update is on my machine, and my connection has the setting Automatically detect RD Access Gateway server settings.
Any thoughts anyone?

Hi RonaldRenaud,
If my understanding is right, this RDP issue only occur in the connection between Windows 8.1 and Server 2008.
Please check if you have installed the update kb2984006.
To resolve this issue caused by update 2989039, install update rollup 2984006. For more information, please refer to the following KB.
http://support2.microsoft.com/kb/2989039/en-us
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

How to upgrade Windows Server 2008 Foundation to Windows Server 2008 Standard

I have a Dell server with Windows Server 2008 Foundation installed. I am now on a larger network which has their own servers for authentication and the Windows Server 2008 Foundation will not let join a domain with more than 15 users. I was told that I needed
to upgrade Windows server 2008 foundation to Windows server 2008 Standard and that process can be done "in place" but I can't find how do do it. I called Dell and they said they basically said they didn't know what I was talking about.
How do I do this?

According to the first one you can perform an in-place upgrade.
Introduction to Windows Server 2008 Foundation
http://technet.microsoft.com/en-us/library/dd459191(WS.10).aspx
How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
http://support.microsoft.com/kb/2255099
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]

Installing CF9 on Windows Server 2008 Standard 64-bit

Hi-
I'm attempting to install a new ColdFusion configuration with a host who is useless regarding the support that they offer (for now, they shall remain nameless).
It's a Windows Server 2008 Standard 64 bit VPS configuration. MySQL is already installed so I'm on the hook to configure ColdFusion 9 with IIS (7.5, I believe). There are numerous settings which the installer does not seem to address so I've had to address several Module Mappings which failed during the install....
Can anyone point me to an installation doc for the above configuration? Will the CF installer eventually handle these issues or are we on our own to support this?
Thanks in advance,
Rich

My advice is to get out now and go to a site like hosting.com that has a solid track record hosting CF. There are several others to choose from. If they are starting this rough you will have constant problems.

Oracle 10g on Windows Server 2003 Standard 64bit

We are running Oracle 10g on Windows Server 2003 Standard 64bit Edition. I am NOT a DBA, so forgive my ignorance.
We have 16GB of physical memory in this server. I was told by a DBA that Oracle runs on "a single process", and because of that, he said that Windows Server 2003 Standard will only allow 2GB max for a single process.
Can anyone confirm this? Thanks.

This sounds more lika a Windows issue. If both Windows and app is "64-bit", I would expect the user virtual address space (per process) to be in the TiB range, if not larger.
(The said 2GiB limit applies to a 32-bit system.)
Message was edited by:
orafad

Lms 3.2 and window server 2008 standard: License Server/Daemon Manager is down

LMS 3.2 and window server 2008 standard, get error when we try
Khi truy nhập vào menu chức năng:
License Server/Daemon Manager is down. Please check license.log for more information.
access licensing:
Error communicating with License Server. License Server may be down. Please start the License Server, then refresh the page.
Lincense.txt is file log of LMS
Must I have to active window server 2008 first ?
thank you very much ?

Hi ,
--Add the Casuser to the Administrator Group
and then reset the casuser password:
1. Go to CSCOpx\setup\support> and run the following command:
resetCasuser.exe
2. Restart the daemon manager:
Net stop crmdmgtd
Net start crmdmgtd
Let me know how it works
If above did not help then send me the syslog.log and screen shot of the EventViewer with the latest Application Error that you see there.
--also screen shot of the below directory :
NMSROOT\etc\license
Thanks
Afroj

Need solution for solving TIME_WAIT in TCP/IP ports in Windows Server 2008 Standard Service Pack 2

In one of our windows machine( OS : Windows Server 2008 Standard (Service Pack 2)-32bit), we are facing TIME_WAIT in all the TCP/IP ports and it is not getting closed.
On analyzing the issue, we found solution for this from the below link,
https://support.microsoft.com/en-us/kb/2553549
In this page, we are able to get the hotfix for Windows Server2008 R2 SP1 but i can't able to get for Windows Server 2008 Standard SP2(32bit). If we try to apply the hotfix vailable for SP1, it is showing "The update does not apply to your System".
Kindly provide us the solution for solving TIME_WAIT issue in the machine.
OS Details : Microsoft Windows Server 2008 Standard
Version : 6.0.6002 SP2 Build 6002
System Type : 32 bit(x86-based PC)
Awaiting for the response.
Thank you,
Pushpalatha.A

Download correct version from Microsoft Update Catalog. Run it with elevated rights.
M.

SVCHost NetSVCS On Windows Server 2008 Standard memory leak with windows update

I have a particular situation that has surfaced lately. I have a series of Windows Server 2008 Standard. I have applications that use WMI to do application interfacing. For years this has been running fine until recenly in the last month
I have seen memory being swallowed by the process SVCHost Netsvcs. I have done significant research into this. The problem appears almost like clock work on a daily basis. I have traced this to windows update which seems to kick off, it is
also using WMI, it starts and seems to get lost then netsvcs starts running off until all memory is consumed and the svchost process eventually fails. At that point I can get back into the system to view it. If I catch it in time I can simply stop windows
update but sometimes I have to take the drastic and unsafe measure to kill that particular svchost process.
There are a lot of threads regarding SVCHost and nothing comes remotely close to this issue as far as I can see.
I have allready ensured that windows update is up to date.
At present I am forced to ensure that windows update is disabled. I then have to manually shut down the other services that are using WMI to do an update. This means down time for my applications realtime updates.

Hi,
does this issue occur on a single server or multiple servers? And is it server 2008 or 2008 R2? (if 2008R2 there is a
hotfix
available which would seem a good fit for your current issue).
If you find the answer of assistance please "Vote as Helpful"and/or "Mark as Answer" where applicable. This helps others to find solutions for there issues, and recognises contributions made to the community :)

Cisco NAC 4.8 and Windows Server 2008 Enterprise 64bit SSO

Hi,
     I try to setup SSO on Cisco NAC 4.8 and Windows Server 2008 Enterprise 64bit, but I can't start Active Directory SSO Service that show error follow below. I saw this error " KDC has no support for encryption type (14)" . Could anyone help me to troubleshoot this problem?
FQDN: active.test.com
Domain Name : test.com
User : ccasso
2011-02-05 12:00:30.225 +0700 WARN com.perfigo.wlan.jmx.adsso.GSSServer
- Server was not running ...
2011-02-05 12:00:30.225 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- Server starting server ...
2011-02-05 12:00:30.225 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- Server is now running ...
2011-02-05 12:00:30.225 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - SPN : [ccasso/[email protected]]
2011-02-05 12:00:30.225 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - building kdc list for domain active.test.com
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - done building kdc list for domain active.test.com
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - KDC(s) :[10.0.240.100]
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - writeKrbFile: writing to file ../conf/krb.txt
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - writeKrbFile: wrote to file ../conf/krb.txt
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - creating login context ...
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - created login context ...javax.security.auth.login.LoginCon
text@5ad7b2
2011-02-05 12:00:40.239 +0700 ERROR com.perfigo.wlan.jmx.adsso.GSSServer
- Unable to start server ... KDC has no support for encryption type (14)
2011-02-05 12:00:50.244 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- Notifying GSSServer status Stopped
2011-02-05 12:00:50.244 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- server is exiting .

Hi,
This error means that your DC does not support the encryption method the ACS wants to use.
Usually this happens when you run 2008 Server with 2003 functionality...
You will need to run ktpass.exe according to the DC you are running:
http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/48/cas/s_adsso.html#wp1277452.
For Windows 2008 Server at 2003 Server functional level:
ktpass -princ newadsso/[adserver.][email protected] -mapuser newadsso -pass
PasswordText -out c:\newadsso.keytab -ptype KRB5_NT_PRINCIPAL
HTH,
Tiago
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

Now there is no available of windows server 2008 R2 64bit download. so i want to know the equivelent product in server 2012?

now there is no available of windows server 2008 R2 64bit download. so i want to know the equivelent product in server 2012?

Hi,
Windows 2008 R2 and Windows 2012 are not equivelent product, there are many new features in Windows 2012, and Windows Server 2008 R2 Evaluation (180 days) still availabe:
http://www.microsoft.com/en-us/download/details.aspx?id=11093
Regards,
Yan Li
Yan Li
TechNet Community Support

OS 10.7, SMB Connection, Change to Unicode with Extended Security on Windows Server 2008 Standard

Hi All, I've searched Google, and I've also contacted Apple Support with no luck: I want to implement unicode with extended security on Windows Server 2008 Standard server shared folders so that Lion can connect normally (i.e. Finder->Go->Connect to Server->IP Address or server name) to SMB shares and access files. I'm lacking information; has anyone actually implemented unicode with extended security? If so, how?
Thanks in advance.
Tom

Thanks for the reply aorlich. Do you mean enable file sharing on my Mac? With file sharing enabled, I still cannot get to my Windows 7 shares, although the files on my Mac do become available to Windows. Thanks again.

Windows Server 2008 Standard 64Bit

Similar Messages

Maybe you are looking for