Windows Server 2008 x64 Trial Install

Problem: Error code: 0x80070070.
Situation: I have three drives. C:, D:, and E:. Drive C is my current OS, Win7 Pro x64. Drive D is my main storage drive for videos, music, etc... Drive E is a terabyte drive that is partitioned in half. I am trying to install Server 2008 onto partition
2 of the drive but at about 3% of the install, I get the above error code.
I have already tried deleting both partitions on drive D, even deleting the System Reserved partition. I created a bran new partition on Drive D and tried to install again but I received the same error.
For the media, I am using a 4GB flash drive. I used the Microsoft Windows 7 USB/DVD download tool, found here: http://www.microsoftstore.com/store/msusa/html/pbPage.Help_Win7_usbdvd_dwnTool. Is my media formatting wrong? I have completely formatted
the USB in diskpart by cleaning it and deleting any partitions on it and creating a new one.
Any help I can get with this issue would be great, thanks!

Hi,
Steps to install windows from a USB flash Drive:
Install Windows from a USB Flash Drive
http://technet.microsoft.com/en-us/library/dn293258.aspx
If everything is configured correctly, please provide more information.
How many disk do you have and which partition you want the image installed?
Could you provide a screenshot of disk management?
Thank you.

Similar Messages

Oracle Patch 10.2.0.4 error - Windows Server 2008 x64

Hello!
Could you please give your comments if you have seen errors described below? It appeared during the Oracle Patch 10.2.0.4 installation in Windows Server 2008 x64.
*************installActions2010-08-06_11-02-02PM.log******************
Using paramFile: C:\ORACLE_Patch_10.2.0.4_Windows\WINDOWS_X86_64\p6810189_10204_MSWIN-x86-64\Disk1\install\oraparam.ini
Checking installer requirements...
Checking operating system version: must be 5.0, 5.1, 5.2 or 6.0. Actual 6.0
Passed
Checking monitor: must be configured to display at least 256 colors. Actual 4294967296 Passed
All installer requirements met.
The commandline for unzip:
C:\ORACLE_Patch_10.2.0.4_Windows\WINDOWS_X86_64\p6810189_10204_MSWIN-x86-64\Disk1\install\unzip -qqqo ../stage/Components/oracle.swd.jre/1.5.0.11.0/1/DataFiles/"*.jar" -d "C:\Users\ADMINI~1\AppData\Local\Temp\OraInstall2010-08-06_11-02-02PM"
The commandline for unzip:
C:\ORACLE_Patch_10.2.0.4_Windows\WINDOWS_X86_64\p6810189_10204_MSWIN-x86-64\Disk1\install\unzip -qqqo ..\stage\Components\oracle.swd.oui\10.2.0.4.0\1\DataFiles\/"*.jar" -d "C:\Users\ADMINI~1\AppData\Local\Temp\OraInstall2010-08-06_11-02-02PM"
The commandline for unzip:
C:\ORACLE_Patch_10.2.0.4_Windows\WINDOWS_X86_64\p6810189_10204_MSWIN-x86-64\Disk1\install\unzip -qqqo ..\stage\Components\oracle.swd.oui.core\10.2.0.4.0\1\DataFiles\/"*.jar" -d "C:\Users\ADMINI~1\AppData\Local\Temp\OraInstall2010-08-06_11-02-02PM"
The number of files bootstrapped for the jre is 551.
The number of files bootstrapped for the oui is 71.INFO: Environment Variables:
INFO:      ORACLE_HOME =
INFO:      PATH = C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files (x86)\Common Files\Acronis\SnapAPI\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files (x86)\Common Files\Acronis\SnapAPI\;C:\Program Files (x86)\Acronis\BackupAndRecovery\;H:\oracle\S50\102
INFO:      CLASSPATH =
INFO: Username:Administrator
INFO: Install area Control created with access level 1
INFO: Oracle Universal Installer version is 10.2.0.4.0
INFO: Setting variable 'PREREQ_CONFIG_LOCATION' to ''. Received the value from variable association.
INFO: Reader/Writer 'oracle.sysman.oii.oiic.OiicGlobalContextXMLReaderWriter' was created.
INFO:
*** Welcome Page***
INFO: Initializing install inventory
INFO: Setting up install inventory
INFO:
*** Specify Source Location Page***
INFO: Initializing OUI Shiphome access setup
INFO: DefaultifyLangiages : Value of oracle.installer.defaultifyLanguages : false
INFO: fetch the file: C:\ORACLE_Patch_10.2.0.4_Windows\WINDOWS_X86_64\p6810189_10204_MSWIN-x86-64\Disk1\stage/shiphomeinfo.properties
INFO: Performing operation for OUI Shiphome access setup
INFO:
*** Select a Product to Install Page***
INFO: Setting the 'TopLevelComp ( ToplevelComp )' property to 'oracle.patchset.db, 10.2.0.4.0, >10.2.0.4.0, [ ][OH:2]'. Received the value from the default settings.
INFO:
*** Select Installation Type Page***
INFO: Setting the 'InstallType ( DEP_MODE )' property to 'Custom'. Received the value from the default settings.
INFO: Setting the 'TopLevelInstallType ( TLDepModes )' property to 'Custom'. Received the value from the default settings.
INFO: install properties filename: C:\Users\ADMINI~1\AppData\Local\Temp\OraInstall2010-08-06_11-02-02PM/oracle.patchset.db_Custom.properties
INFO:
*** Specify Home Details Page***
INFO: Setting the 'OracleHome ( ORACLE_HOME )' property to 'H:\oracle\S50\102'. Received the value from the UI page.
INFO: Setting the 'OracleHomeName ( ORACLE_HOME_NAME )' property to 'S50102'. Received the value from the UI page.
INFO: Initializing OUI Oracle Home access setup
INFO: Setting variable 'ORACLE_HOME' to 'H:\oracle\S50\102'. Received the value from the UI page.
INFO: Loading shiphomepropertiesfrom C:\Users\ADMINI~1\AppData\Local\Temp\OraInstall2010-08-06_11-02-02PM/shiphomeproperties.xml
INFO: DefaultifyLangiages : Value of oracle.installer.defaultifyLanguages : false
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.rat_10.2.0.4.0' to 'H:\oracle\S50\102/oracle_prod'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.sysman.ccr_10.2.7.1.0' to 'H:\oracle\S50\102/ccr'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.jdk_1.5.0.11.0' to 'H:\oracle\S50\102\jdk'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.swd.oui_10.2.0.4.0' to 'H:\oracle\S50\102\oui'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.swd.oui.core_10.2.0.4.0' to 'H:\oracle\S50\102\oui'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.swd.opatch_10.2.0.4.0' to 'H:\oracle\S50\102\OPatch'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.swd.jre_1.5.0.11.0' to 'H:\oracle\S50\102\jre\1.5.0'. Received the value from the variable calculation.
INFO: Performing operation for OUI Oracle Home access setup
INFO: SRVM ClusterInfo.IsLocalOnly() called. Return value obtained is 'false'.
INFO: The CRS clusterware location for 'oracle.crs 10.1.0.2.0' is not found.
INFO: This is not a cluster system.
INFO: Node selection page will not be shown.
INFO: Defaulting prerequisite location to 'C:/ORACLE_Patch_10.2.0.4_Windows/WINDOWS_X86_64/p6810189_10204_MSWIN-x86-64/Disk1/stage/prereq'.
INFO:
*** Product-Specific Prerequisite Checks Page***
INFO: Entry point:oracle.patchset.db_Custom
INFO: Starting Prerequisite checks : Fri Aug 06 23:04:20 EEST 2010
INFO: Checking checkToInstallCCR
     This is a prerequisite condition is to check if the ccr component need to be installed or ignored for installation.
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking CompatibilityChecks
     This is a prerequisite condition to check whether the Oracle Home specified by the user already contains any installed product which is incompatible with the product being installed.
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Prerequisite checks completed : Fri Aug 06 23:04:20 EEST 2010
INFO: oracle.ons Product Location: Empty path specified.
INFO: oracle.sysman.repository.db Product Location: Empty path specified.
INFO:
*** Language Selection Page***
INFO:
*** Specify Local Host Name Page***
INFO: Setting the 'HostName ( ORACLE_HOSTNAME )' property to '79SSO-LS'. S_LOG_VAR_VALTYPE_CLONE
INFO: Setting languages [fi, en] for patch 'Oracle Notification Service Patch 10.2.0.4.0 '
INFO: Setting languages [fi, en] for patch 'Enterprise Manager Repository DB 10.2.0.4.0 '
INFO: *** Entering Component: oracle.ons installation
INFO: Setting variable 's_sharedOH' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 's_patchtmpLocation' to ' '. Received the value from the variable calculation.
INFO: Setting variable 's_opmnRemotePort' to '6200'. Received the value from the variable calculation.
INFO: Setting variable 's_opmnLocalPort' to '6101'. Received the value from the variable calculation.
INFO: Calling Query generalQueries10.2.0.2.0 getOSName
SEVERE: Abnormal program termination. An internal error has occured. Please provide the following files to Oracle Support :
"C:\Program Files\Oracle\Inventory\logs\installActions2010-08-06_11-02-02PM.log"
"C:\Program Files\Oracle\Inventory\logs\oraInstall2010-08-06_11-02-02PM.err"
"C:\Program Files\Oracle\Inventory\logs\oraInstall2010-08-06_11-02-02PM.out"
INFO: User Selected: Yes/OK
*************installActions2010-08-06_11-02-02PM.log******************
**************oraInstall2010-08-06_11-02-02PM.err***********************
Exception java.lang.NoClassDefFoundError: oracle/sysman/oii/oiix/OiixGeneralQueries occurred..
java.lang.NoClassDefFoundError: oracle/sysman/oii/oiix/OiixGeneralQueries
     at getOSName.performQuery(getOSName.java:16)
     at oracle.sysman.oii.oiis.OiisCompContext.doQuery(OiisCompContext.java:2498)
     at Patches.oracle.ons.v10_2_0_4_0.CompContext.getCalculatedValueObject_s_operatingSystem(Unknown Source)
     at Patches.oracle.ons.v10_2_0_4_0.CompContext.getCalculatedValueObject(Unknown Source)
     at oracle.sysman.oii.oiis.OiisCompContext.getCalculatedValue(OiisCompContext.java:646)
     at oracle.sysman.oii.oiis.OiisVariable.getCalculatedValue(OiisVariable.java:1477)
     at oracle.sysman.oii.oiis.OiisVariable.setVariable(OiisVariable.java:2430)
     at oracle.sysman.oii.oiis.OiisCompContext.doOperation(OiisCompContext.java:1093)
     at oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:147)
     at oracle.sysman.oii.oiic.OiicCompsWizEngine.doOperation(OiicCompsWizEngine.java:202)
     at oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:147)
     at oracle.sysman.oii.oiic.OiicInstallSession$OiicSelCompsInstall.doOperation(OiicInstallSession.java:3844)
     at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)
     at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:1278)
     at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:289)
     at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:572)
     at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:962)
     at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:899)
**************oraInstall2010-08-06_11-02-02PM.err***********************
***************oraInstall2010-08-06_11-02-02PM.out**************************
**************oraInstall2010-08-06_11-02-02PM.out*************************

A similar error is mentioned in MOS Doc 840965.1 (Upgrading Agent 10.2.0.3 To 10.2.0.4 Using OUI Is Failing With "Abnormal program termination") - not sure if the scenario and solution can help in your case.
HTH
Srini

Windows Server 2008 x64 and Crystal Reports Server Embedded

We're attempting to certify our software with Windows Server 2008 x64 and want to know the best way to configure both the server and client of Crystal Reports Server Embedded. Currently, our software is certified against Windows Server 2003 x86, and we install Crystal Reports Server Embedded XI Release 2 (no SP) on the application server, and we deploy the Crystal Reports .NET merge modules for XI Release 2 (no SP) on any client machines.
I believe I am correct in stating that no version of Crystal Reports Server Embedded officially supports Windows Server 2008 x64 (based on some other forum postings) until SP1 comes out (which I don't think has happened at this point). If that is true, we can live with installing the RAS on a separate Windows Server 2003 x64, if that's even possible. With that said, can we even get our Windows Server 2008 x64 running with the latest Crystal Reports 2008 .NET merge modules? We've tried many different configurations between CR XI R2 SPs and CR 2008 for both client and server and have very little luck (either it won't install correctly because of x64 or missing .cabs, etc.) on both the client and server side of things.
Can someone suggest the optimal configuration when Windows Server 2008 x64 is in the mix, noting that we can use a secondary Windows Server 2003 (x64 preferred but can fallback to x86)? Or do we have to wait for Crystal Reports Server Embedded 2008 SP1 to be released, and if so, does anyone know of the date?
Thanks,
Ross Beehler

CRSE 2008 is a 32 bit app, it works on 64 bit OS's but all parts must also be running in 32 bit mode.

Windows Server 2008 x64 on T61P?

Hi Everyone,
Just got my T61P with Vista x64 pre-installed - love my Thinkpad! However, like just about everyone on the planet I'm disappointed with Vista and would like to install Windows Server 2008 x64 Standard (no hyper-v) just like on my office desktop computer. If you have not yet run Windows Server 2008 it is an *outstanding* OS, as good and wonderful and just right as Vista is, well... annoying.
Anyone installed Windows Server 2008 x64 on their Thinkpad T61P? My experience with the office desktops is that so far Vista x64 drivers work just fine on Server 2008 x64. Any tips?
Thanks in advance!

Erik - Thanks for the info!
I use 64-bit applications ... some notes on why:
enterprise supports up to 32GB of memory so the argument to use x64 for memory support is nullified.
... that's not correct. x64 windows versions allow 64-bit addressing, so 64-bit applications created for x64 windows can take advantage of large amounts of cheap RAM as 32-bit applications cannot. 32-bit applications (they are all 32-bit applications in a 32-bit Windows version, even in Server 2008) are restricted to a limited process space of at most 2 GB.
It's true there is a LARGEADDRESSAWARE kludge to enable limited use of up to 3 GB by a user process (and there is an equivalent to this in Server 2008), but this has gone nowhere because it is far more straightforward and more productive for an applications developer to simply go 64-bit rather than invest any engineering resources into a one-of-a-kind kludge for an era that is already past.
Yes, it is true that if you are stuck running 32-bit applications you have less incentive to use x64 windows. But going true 64-bit is a huge advantage in reliability and performance. Given the very low cost of RAM in modern times it makes sense to do so, even in notebook settings that are often limited to only 4 GB of RAM. 64-bit applications in Windows tend to have decisive performance and reliability advantages so whenever one competitor in a given segment makes the jump to 64-bit pretty much all of them must do so.

Access Denied DNS Server 'Windows Server 2008 R2 and Install AD (PDC) and ADD (BDC=Additional AD)

hi
I Have
Windows server 2008 R2 and Install Active Directory
Install and configuration for windows server 2008 PDC (Primary Domain Controller) and BDC (Additionall Domain Controller)
Error
A security Package specific Error Occurrred. would you like to add it anyway
and
Access Denied Console Other Domain AD
and Nslookup
C:\Users\admin>nslookup pdc
Server: bdc.*.*
Address: 10.0.X.X
Name: pdc.*.*
Addresses: 10.0.1.11
10.0.X.X

Hello,
your description is a bit confusing. You get the error message when you try to add the other DC to the DNS management console on one machine?
Both DCs belong to the same domain according to your description?
Please post an unedited ipconfig /all from both DC/DNS servers here.
BTW: PDC/BDC concept is gone since the start from AD with Windows 2000 Server. All DCs are the same, difference are only the FSMO roles, still that can be held from any DC in the domain according to some rules.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://msmvps.com/blogs/mweber/
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

Windows Server 2008 x64 on Bootcamp: Ethernet drivers missing/not working

Hello folks,
at the moment I try to get Windows Server 2008 x64 running on a new Mac Pro (Early 2009).
Installation of Windows Server 2008 x64 (Enterprise) worked out of the box. However, the ethernet drivers do not work. Ethernet cards are not detected and working due to missing drivers.
I have tried several different Intel driver packages. All of them report "No intel card found.". However, the vendor ID of the ethernet card clearly points to Intel.
I have not been able to find a driver yet, does anyone have an idea?
E.g. does someone know the exact chip name? The driver "name"? Anything else?
Thank you in advance,
Stefan

Erik - Thanks for the info!
I use 64-bit applications ... some notes on why:
enterprise supports up to 32GB of memory so the argument to use x64 for memory support is nullified.
... that's not correct. x64 windows versions allow 64-bit addressing, so 64-bit applications created for x64 windows can take advantage of large amounts of cheap RAM as 32-bit applications cannot. 32-bit applications (they are all 32-bit applications in a 32-bit Windows version, even in Server 2008) are restricted to a limited process space of at most 2 GB.
It's true there is a LARGEADDRESSAWARE kludge to enable limited use of up to 3 GB by a user process (and there is an equivalent to this in Server 2008), but this has gone nowhere because it is far more straightforward and more productive for an applications developer to simply go 64-bit rather than invest any engineering resources into a one-of-a-kind kludge for an era that is already past.
Yes, it is true that if you are stuck running 32-bit applications you have less incentive to use x64 windows. But going true 64-bit is a huge advantage in reliability and performance. Given the very low cost of RAM in modern times it makes sense to do so, even in notebook settings that are often limited to only 4 GB of RAM. 64-bit applications in Windows tend to have decisive performance and reliability advantages so whenever one competitor in a given segment makes the jump to 64-bit pretty much all of them must do so.

OCI8 IN WINDOWS SERVER 2008 x64

Good morning,
I'm trying to configure Oracle with php in Windows server 2008, but when I try to enable Oci8, the php log shows this error:
"Warning: PHP Startup: Unable to load dynamic library 'C:\Program Files (x86)\PHP\ext\php_oci8.dll' - %1 is not a valid Win32 application. in Unknown on line 0"
So that, the phpinfo doesn't show the enabled module. Doesn't Oci8 work with 64 bytes systems?
I'll appreciate your help.
Thank you,

I have a Windows 2008 x64 server, with 11gR2 (64 bits) and PHP installed. In my case ZendServer 5.0.3. What I did is I replaced, in the ZendServer bin directory, the light dll (oraociicus11.dll) with the full dll of the 32 bit Instant Client (oraociei11.dll). I had to do this because the softlink approach did not work for me, and neither putting an entry in PATH to the 32 bit Instant Client. Maybe ZendServer behaves differently from PHP in this respect.
My question is, I used to access the local DB (I need to access both a local DB and a remote one) without going through tnsnames.ora, e.g. like this ,
$c = oci_connect('USER', 'PASS');
this would connect me directly to the local DB. I cannot do this anymore, I have to give the local information as in $c = oci_connect('USER', 'PASS', '//localhost/SID');
I tried to set the ORACLE_SID env var but that did not help. Will I not be able anymore to connect locally without the connection string in oci_connect?
Thanks
Edited by: francescom on Oct 4, 2010 1:45 AM

Windows Server 2008 x64 SP2 SAN disks falls off

Hello!
We have a Windows Server 2008 Standart SP2 x64, which is connected via two HBAs QLogic QLA2440 to a Storage Xyratex F5402. On DS5402 are located three LUNs for the corporate file storage. These LUNs are displayed in Windows Server as local disks E F G.
As the MPIO software it is used Xyratex Storview Pathmanager 6.00.5016.14 (Microsoft MPIO Driver 6.0.6002.18005) in Failover\Failback configuration, and three disks are adjusted for work on three different ways.
It is all normally worked since 2008
But problems have begun with the beginning of this year.
In operation time any of the SAN disks falls off. With a F5402 all is normal and its logs there are no errors.
In Windows Event System Log the folowing errors and warnings:
EventID: 515, Source: xyrsp200 (Xyratex F5402E Multi-Path Device Specific Module). The path for logical drive [SN: 60050CC00020188D0000000000000007] has failed over to [0005 4:0:1:2] because of a path error.
EventID: 23, Source: mpio. Errors in all ways. \Device\MPIODisk2 it will be removed.
EvetID: 260, Source: xyrsp200 The active path on logical drive [SN: 60050CC00020188D0000000000000007] has been switched to the preferred path on [0005 5:0:0:2].
EventID: 15, Source: disk. Access to the device \Device\Harddisk5\DR5 while is impossible
and further an disk erors...
Disk reloading in Windows Disk Manager doesn't help. I am compelled to reboot the server. After reboot all works as though anything and wasn't to the following such case.
As fall off not all LUNы at once (one can fall off, others and will to work normally) a problem probably either in Windows or in Xyratex Storview Pathmanager.
After adjustment of monitoring I have found out that at the moment of failure the current queue of a falling disk was 6 and the size of operation of record on a disk has sharply increased.
May be the disk simply hasn't sustained loading (though strange - Fiber-Chaneell, and High-Perfomance Disks Storage). In Windows it can be somehow possible to optimize operations of work with disks that there were no such falls.
I need a help !!!
Andy Mishechkin

Hello
I've configured my SCOM service on windows server 2008 r2 sp1, and it's database is placed on 2 disks on SAN storage (HP p9000). since MPIO is configured, sometimes SCOM was stop working. I looked Disk management console and I saw DB disks were gone! This problem
solves when I restart the server. This was happening frequently and I've changed the MPIO configuration policies. that get better but it was happening in a bit longer periods.
I searched and found out I have to install Fibrechannel hotfix (fcinfo_amd64) and Windows6.1-KB2470949-v2-x64 and the mentioned patch above. I did this and for last 3 months that was ok but last night it happens again.
It is our monitoring system and send very important messages. please help me.
may be this information helps:
Alert
occuring sequence in LOG files:
All paths have failed.
\Device\MPIODisk2 will be removed.
A fail-over on \Device\MPIODisk2
occurred.
The device,
\Device\Harddisk3\DR3,
is not ready for access yet.
The description for Event ID 304 from source hpxpdsm cannot be found.
Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer
thanks in advance

Product Key for Windows Server 2008 R2 Trial Period

We have downloaded the trial version of Windows Server 2008 R2 from the Microsft web site. We have installed it but we never received the product key for the trial period.
We are still assessing if all our applications can work with Windows Server 2008 R2 and would need the time to assess the product.
How can we obtain such a key?
Thank you

Click Start, and then click Command Prompt.
Type slmgr.vbs -dli, and then press ENTER to check the current status of your evaluation period.
To reset the evaluation period, type slmgr.vbs –rearm, and then press ENTER.
Restart the computer.
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Problem calling COM Object on Windows Server 2008 x64

Hi,
We are using 32 bits COM object called in Coldfusion page on 32 bits OS. It works fine since few years.
Now we need to use it on x64 Windows Server 2008 and 64bits IIS.
As I 've seen (http://www.coldfusionjedi.com/forums/messages.cfm?threadid=87869C67-B1 9B-288F-F32B6E8BAB3228CA ),a 64 bits process can only call 64 bits DLL.
So we created a 64 bits Wrapper like this : http://www.dnjonline.com/article.aspx?id=jun07_access3264
But calling 64 bits COM Object still raises the same error (" The cause of this exception was that: java.lang.RuntimeException: Can not use native code: Initialisation failed") whereas it works fine with a 64 bits executable created in .NET for example.
Is there a known issue about this subject?
Sorry for english , I'm a french developper.
Thanks in advance.

Can somebody please share the solution for this issue?
I am facing similar issue with Windows 2012 R2 x64 OS and Excel 2007(32-bit) combination.
I tried couple of things like Excel is able to Open an existing workbook on my system but fails to
create a new Workbook as done by invoking the "Add" command. It fails with Error 800a03ec.
I tried creating the two folders i.e. C:\Windows\SysWOW64\config\systemprofile\Desktop & C:\Windows\system32\config\systemprofile\Desktop, but could not get it working.

Windows Server 2008 R2 - Trial Version Activation Error

I downloaded a trial of Windows Server 2008 R2 a few months ago. I may have loaded the ISO onto another PC for testing, but the testing is no longer active. However, I am testing a new environment where I need to load Server 2008 R2 onto
2 different servers for testing, before I activate. I will be purchasing keys once my lab is fully functioning if needed. One Virtual Machine will be moved to a server which will be running Server 2012 R2 Datacenter in the future.
Back to the problem at hand. When I try to Activate my Server 2008 R2 copy to get 180 days trial started, it errors out with 0xC004F074. We don't use a KMS Server, and anything I can find seems to refer to this as an error. I just need
to activate a trial version.

Hi,
Thanks for posting here.
Regarding the current issue, please understand this error code appears only during the time of activation when the Software Licensing Service reports that it cannot activate the product key
since the Key Management Service cannot be contacted. Please follow the steps below to activate the machine again to see if it works.
1) Open cmd(command prompt) with administrator rights
2) Type slmgr.vbs –ipk xxxxx-xxxxx-xxxxx-xxxxx-xxxxx (x should be replaced by your 25 digit product key)
3) Hit enter
4) Type slmgr.vbs –ato (This will change the product key)
5) Hit enter
For details, please refer to the following article.
Windows Server 2012 and Windows 8 - Activation Error 0xC004F074
http://www.petenetlive.com/KB/Article/0000766.htm
How to Fix Activation Error 0xC004F074 in Windows 8 and 8.1?
http://atechjourney.com/how-to-fix-activation-error-0xc004f074-in-windows-8.html/
Hope it helps.
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support

Windows itunes 10.7 update break itunes (windows server 2008 x64) older version of itunes works fine

Hi!
I just update itunes 10.7 to my (windows server 2008 R2) PC.
After update it stops to work...
Itunes just closes when tryning to start.
I did try repairn installation but status is same.
Old version was workin fine, how i can fix this?

windows Eventlog error message:
Faulting application name: iTunes.exe, version: 10.7.0.21, time stamp: 0x504d85d9
Faulting module name: KERNELBASE.dll, version: 6.1.7601.17651, time stamp: 0x4e211319
Exception code: 0xe06d7363
Fault offset: 0x0000b9bc
Faulting process id: 0x7f0
Faulting application start time: 0x01cd9776417ddf4b
Faulting application path: C:\Program Files (x86)\iTunes\iTunes.exe
Faulting module path: C:\Windows\syswow64\KERNELBASE.dll
Report Id: 97b52139-0369-11e2-83a8-6c626d917f87

Trying to install OEM 10g Grid Control agent on Windows Server 2008 x64

Received the following when trying to install OEM 10.2.0.2 for Windows 32 bit. I believe Windows 64 bit version does not exist. I have installed this on 2003 x64 in the past.
Error message:
Checking operating system version: must be 4.0, 5.0, 5.1 or 5.2. Actual 6.0
Failed <<<<
Is there a workaround or a version that will install on 2008 x64?
Thanks.

This will give you the complete picture of Grid Certification.
Oracle Enterprise Manager 10g Grid Control Certification Checker
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=412431.1
Is there a workaround or a version that will install on 2008 x64?Well, no OMS has been certified with this version as of now. You can have 10.2.0.3/4 OMS on 2008(32 Bit)
10.2.0.4 Agent is certified with 2008 64 bit.

B1DIEvent Service on Windows Server 2008 x64 - installation hanging

I'm trying to install the B1DIEvent Service on a Windows 2008 x64 Server but the installation is not completing. It does create the directories in the SAP folder but the installer hangs at roughly 95%.
It seems to not be able to register the service on the server.
Does anyone know if there would be compatability issues with Wondows 2008 Server x64? Or are there any speciffic steps that I can take to install this?
I have installed MSMQ on the server.
Any help would be appreaciated.
Best wishes
Edu van Zyl

Hi Edu,
Did you followed the instructions compiled in the other threads showing how to recompile the dll???
Just follow step by step what is described there, it should work.
DI EVENT SERVICE ON 64 SERVER
1. Change compilation option to x64
2. You have to replace the following 2 lines modified marked with:
char msg[ 398 ]; // Old was mgs[378]
sock, msg, 398, 0, (const struct sockaddr*)&sAddr, sizeof(struct
sockaddr_in));
3. Replace the old dll by the new one compiled
4. Don't forget to register the dll (after compiling and copying in the right folder):
C:\WINDOWS\SysWOW64>regsvr32.exe "C:\Program Files (x86)\SAP\SAP Business
One DI Event Service\SAP Business One DI Event Server\SBO_SP_TransactionNotification\B1DIEventsSender.dll"
Both Ad and Andres succeeded to do it.
Hope it helps
Trinidad.

Windows Server 2008 X64 - gpupdate takes 10min - svchost.exe (gpsvc) pid logs 8.5 million events in procmon

Hello,
We've seen that on our 2008 x64 servers the svchost.exe that holds gpsvc in it takes up alot of CPU-time. Upon further investigation I saw that when it refreshes policies it holds 1 core for 10 minutes. I setup a procmon and filtered it on the pid off the gpsvc-svchost and saw that it logged 8.5 million events.
It keeps looping events where it seems to be checking history-data under "C:\ProgramData\Microsoft\Group Policy\History\<GUIDS>".
We are using GPPreferences. Has anyone seen anything like this before?
I have the .PML-file from procmon, however its 350MB zipped so I dont know how to attach it to case.

Hi,
To better understand the issue, please help confirm the following:
1.    Do all computers encounter this issue?
2.    When did this issue begin to occur? Did it coincide with any events, such as the installation of some software?
Meanwhile, please perform the steps below to see if the issue goes away:
1.    Delete the contents in the "C:\ProgramData\Microsoft\Group Policy\History\" folder.
2.    Please perform a clean boot on the server:
1)    Click Start, type msconfig in the Start Search box, and then press ENTER.
2)    On the General tab, click Selective Startup.
3)    Under Selective Startup, click to clear the Load Startup Items check box.
4)    Click the Services tab, click to select the Hide All Microsoft Services check box, and then click Disable All.
5)    Click OK.
6)    When you are prompted, click Restart.
If the issue continues, please help collect the following information for further research:
1.    Enable gpsvc.log:
Please create the following key in Registry Editor:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Diagnostics
Type: DWORD
Value: GPSvcDebugLevel
Data: 0x30002 (hexadecimal)
2.    Please run gpupdate /force to reproduce the issue and then collect MPSReport on the server:
1) Download the MPSReport from the website below:
http://www.microsoft.com/downloads/details.aspx?FamilyID=CEBF3C7C-7CA5-408F-88B7-F9C79B7306C0&displaylang=en
2) Double-click the executable to launch the report gathering tool on the computer.
3) Follow the steps as guided by the Wizard.
4) On the Select the diagnostics you want to run page, select General, Internet and Networking, Business Networks, and Server Components.
3.    After that, please zip the gpsvc.log (%windir%\debug\usermode\gpsvc.log), MPSReport and the PML.file and upload to the following space:
https://sftasia.one.microsoft.com/choosetransfer.aspx?key=ef4b8b4e-0e6c-4774-a132-2d072f8b77b0
Password: fQxbhTjUV
More Information about MPSReport:
http://blogs.technet.com/askperf/archive/2009/05/01/two-minute-drill-the-new-mps-reports.aspx
This posting is provided "AS IS" with no warranties, and confers no rights.

Windows Server 2008 x64 Trial Install

Similar Messages

Maybe you are looking for