Windows Server 2012 R2 download problem!

I am tiring to download Windows Server 2012 R2. But, after download 1.30GB it show download failed!!
I am facing this problem in 3days, tried 15 more times but it gave me same result!!
Please give me a solution.

On Thu, 9 Apr 2015 18:08:54 +0000, amiya.cse7 wrote:
I am tiring to download Windows Server 2012 R2. But, after download 1.30GB it show download failed!!
I am facing this problem in 3days, tried 15 more times but it gave me same result!!
Please give me a solution.
This forum, as per the name, is only for Windows 10 Server questions.
Paul Adare - FIM CM MVP
If debugging is the process of removing bugs, then programming must be the
process of putting them in. -- Dykstra

Similar Messages

  • Windows server 2012 R2 booting problem

    I am trying to install windows 2012 R2 standard in Hp ml350 g8 Server. after completing the installation windows is not booting properly . After entering the user name and password only c:\user\administrator display in the screen . if i type exit
    on it then only   a black screen and mouse pointer display. kindly suggest me what to do.

    can any one suggest me what to with this booting problem! is there any hardware problem or it's problem with the media as the media was downloaded from vls.my problem is that  After
    entering the user name and password only c:\user\administrator display in the screen . if i type exit on it then only   a
    black screen and mouse pointer display. In my opinion Microsoft need have to provide the media disk along with the licences and also some short of technical support free over phone. but they don't !!! 

  • Windows Server 2012 R2 Routing problem

    Hello everybody
    I have the following problem:
    Server with two NICS, one (IP 172.30.8.X) it's configure with a default gateway (172.30.8.1), the other one (IP 172.30.32.X) doesn't have a default gateway and has a static route to reach another network (172.15.28.X)
    Everything was worning fine, no reboots, no updates installed; suddenly the specified route for the second NIC is not working. When we try to reach the 172.15.28.X network, it goes thorugh the default gateway. Please your help.
    We tried deleting the route and re-add it again, but doesn't work; also verified the TCP/IP configuration on all NICs everything it's ok.
    Here's an output of the configured routes on the server:
    C:\Windows\system32>route print
    ===========================================================================
    Interface List
     12...9c b6 54 88 49 a8 ......HP FlexFabric 10Gb 2-port 534FLB Adapter  #54
     13...9c b6 54 88 49 ac ......HP FlexFabric 10Gb 2-port 534FLB Adapter  #55
     15...02 78 b2 0e 8f c0 ......Microsoft Failover Cluster Virtual Adapter
      1...........................Software Loopback Interface 1
     14...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2
     16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter
     17...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #3
    ===========================================================================
    IPv4 Route Table
    ===========================================================================
    Active Routes:
    Network Destination        Netmask          Gateway       Interface  Metric
              0.0.0.0          0.0.0.0       172.30.8.1     172.30.8.107    266
            127.0.0.0        255.0.0.0         On-link         127.0.0.1    306
            127.0.0.1  255.255.255.255         On-link         127.0.0.1    306
      127.255.255.255  255.255.255.255         On-link         127.0.0.1    306
          169.254.0.0      255.255.0.0         On-link     169.254.4.217    261
        169.254.4.217  255.255.255.255         On-link     169.254.4.217    261
      169.254.255.255  255.255.255.255         On-link     169.254.4.217    261
          172.15.28.0    255.255.254.0      172.30.32.1     172.30.8.107     11
           172.30.8.0    255.255.254.0         On-link      172.30.8.107    266
         172.30.8.107  255.255.255.255         On-link      172.30.8.107    266
         172.30.9.255  255.255.255.255         On-link      172.30.8.107    266
          172.30.32.0    255.255.254.0         On-link      172.30.32.20    266
         172.30.32.20  255.255.255.255         On-link      172.30.32.20    266
        172.30.33.255  255.255.255.255         On-link      172.30.32.20    266
            224.0.0.0        240.0.0.0         On-link         127.0.0.1    306
            224.0.0.0        240.0.0.0         On-link     169.254.4.217    261
            224.0.0.0        240.0.0.0         On-link      172.30.8.107    266
            224.0.0.0        240.0.0.0         On-link      172.30.32.20    266
      255.255.255.255  255.255.255.255         On-link         127.0.0.1    306
      255.255.255.255  255.255.255.255         On-link     169.254.4.217    261
      255.255.255.255  255.255.255.255         On-link      172.30.8.107    266
      255.255.255.255  255.255.255.255         On-link      172.30.32.20    266
    ===========================================================================
    Persistent Routes:
      Network Address          Netmask  Gateway Address  Metric
              0.0.0.0          0.0.0.0       172.30.8.1  Default
          172.15.28.0    255.255.254.0      172.30.32.1       1
    ===========================================================================
    Below is the output of a tracert:
    C:\Windows\system32>tracert 172.15.28.20
    Tracing route to 172.15.28.20 over a maximum of 30 hops
      1    <1 ms    <1 ms    <1 ms  172.30.8.1
      2    <1 ms    <1 ms    <1 ms  172.16.80.1
      3     1 ms     1 ms     1 ms  10.11.17.193
    Any idea is welcome, thanks in advance.
    Regards. Cristian V.

    Hello Eve
    Sorry for the delay, we opened a PSS case.
    So far, the problems seems to be a misconfiguration on one of the devices.
    This is the last output, as soon as we identify the issue and the problem, I'll let you know:
    On server UIOMATRP-EXMB01 the route was added succesfully:
    route add  172.30.32.0 mask 255.255.255.0 172.15.28.1
    C:\Windows\system32>route add  172.30.32.0 mask 255.255.255.0 172.15.28.1
    OK!
    C:\Windows\system32>tracert 172.30.32.21
    Tracing route to 172.30.32.21 over a maximum of 30 hops
      1     5 ms     2 ms     2 ms  172.15.28.1
      2    <1 ms    <1 ms    <1 ms  10.6.1.3
      3     1 ms    <1 ms    <1 ms  10.5.1.3
      4     1 ms     1 ms     1 ms  10.21.17.65
      5     3 ms     5 ms     9 ms  10.201.21.22
      6     9 ms     9 ms     8 ms  10.201.111.97
      7     9 ms    19 ms     8 ms  10.11.17.193
      8     8 ms     8 ms     8 ms  172.16.80.3
      9     *        *        *     Request timed out.
    10     *        *        *     Request timed out.
    11     *     ^C
    C:\Windows\system32>route delete 172.30.32.0
    OK!
    C:\Windows\system32>tracert 172.30.32.21
    Tracing route to 172.30.32.21 over a maximum of 30 hops
      1     1 ms     1 ms     1 ms  172.15.4.1
      2    <1 ms    <1 ms    <1 ms  ^C
    route add  172.30.32.0 mask 255.255.255.0 172.15.28.1 -p
    OK!
    C:\Windows\system32>tracert 172.30.32.21
    Tracing route to 172.30.32.21 over a maximum of 30 hops
      1     4 ms     2 ms     1 ms  172.15.28.1
      2    <1 ms    <1 ms    <1 ms  10.6.1.3
      3     1 ms    <1 ms    <1 ms  10.5.1.3
      4     1 ms     1 ms    <1 ms  10.21.17.65
      5     5 ms     4 ms     9 ms  10.201.21.22
      6     7 ms     7 ms     7 ms  10.116.41.197
      7     9 ms   207 ms     9 ms  10.116.41.198
      8     9 ms     8 ms     9 ms  10.11.17.194
      9     9 ms     *       10 ms  172.16.80.3
    10     *        *        *     Request timed out.
    11     *
    ===========================================================================
    Interface List
    17...9c b6 54 93 fd d8 ......HP FlexFabric 10Gb 2-port 534FLB Adapter  #76
    16...9c b6 54 93 fd dc ......HP FlexFabric 10Gb 2-port 534FLB Adapter  #77
    15...02 fa 66 6d 81 b1 ......Microsoft Failover Cluster Virtual Adapter
      1...........................Software Loopback Interface 1
    12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter
    13...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2
    14...00 00 00 00 00 00 00 e0 Microsoft 6to4 Adapter
    18...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #3
    ===========================================================================
    IPv4 Route Table
    ===========================================================================
    Active Routes:
    Network Destination        Netmask          Gateway       Interface  Metric
              0.0.0.0          0.0.0.0       172.15.4.1      172.15.5.38    266
            127.0.0.0        255.0.0.0         On-link         127.0.0.1    306
            127.0.0.1  255.255.255.255         On-link         127.0.0.1    306
      127.255.255.255  255.255.255.255         On-link         127.0.0.1    306
          169.254.0.0      255.255.0.0         On-link     169.254.1.233    261
        169.254.1.233  255.255.255.255         On-link     169.254.1.233    261
      169.254.255.255  255.255.255.255         On-link     169.254.1.233    261
           172.15.4.0    255.255.254.0         On-link       172.15.5.38    266
          172.15.5.38  255.255.255.255         On-link       172.15.5.38    266
         172.15.5.255  255.255.255.255         On-link       172.15.5.38    266
          172.15.28.0    255.255.254.0         On-link      172.15.28.20    266
         172.15.28.20  255.255.255.255         On-link      172.15.28.20    266
        172.15.29.255  255.255.255.255         On-link      172.15.28.20    266
          172.30.32.0    255.255.255.0      172.15.28.1     172.15.28.20     11
    ---------------------------à route successfully applied
            224.0.0.0        240.0.0.0         On-link         127.0.0.1    306
            224.0.0.0        240.0.0.0         On-link     169.254.1.233    261
            224.0.0.0        240.0.0.0         On-link      172.15.28.20    266
            224.0.0.0        240.0.0.0         On-link       172.15.5.38    266
      255.255.255.255  255.255.255.255         On-link         127.0.0.1    306
      255.255.255.255  255.255.255.255         On-link     169.254.1.233    261
      255.255.255.255  255.255.255.255         On-link      172.15.28.20    266
      255.255.255.255  255.255.255.255         On-link       172.15.5.38    266
    ===========================================================================
    Persistent Routes:
      Network Address          Netmask  Gateway Address  Metric
              0.0.0.0          0.0.0.0       172.15.4.1  Default
          172.30.32.0    255.255.255.0      172.15.28.1       1
    ===========================================================================
    IPv6 Route Table
    ===========================================================================
    Active Routes:
    If Metric Network Destination      Gateway
      1    306 ::1/128                  On-link
    14   1010 2002::/16                On-link
    14    266 2002:ac0f:526::ac0f:526/128
                                        On-link
    14    266 2002:ac0f:1c14::ac0f:1c14/128
                                        On-link
    15    261 fe80::/64                On-link
    15    261 fe80::7439:c10d:c470:c569/128
                                        On-link
      1    306 ff00::/8                 On-link
    15    261 ff00::/8                 On-link
    ===========================================================================
    Persistent Routes:
      None
    --- ARP
    Interface: 169.254.1.233 --- 0xf
      Internet Address      Physical Address      Type
      169.254.255.255       ff-ff-ff-ff-ff-ff     static    
      224.0.0.22            01-00-5e-00-00-16     static   
      224.0.0.252           01-00-5e-00-00-fc     static   
    Interface: 172.15.5.38 --- 0x10
      Internet Address      Physical Address      Type
      172.15.4.1            00-08-e3-ff-fd-90     dynamic   ---------------à
    default gateway
      172.15.4.41           00-50-56-88-50-71     dynamic  
      172.15.4.42           ac-16-2d-78-0c-5c     dynamic  
      172.15.4.52           00-08-02-b0-49-17     dynamic  
      172.15.4.55           00-50-56-bd-72-f0     dynamic  
      172.15.4.56           00-50-56-ab-00-16     dynamic  
      172.15.5.33           00-50-56-88-11-4a     dynamic  
      172.15.5.34           00-50-56-88-6d-14     dynamic  
      172.15.5.35           fc-15-b4-1c-05-20     dynamic  
      172.15.5.36           fc-15-b4-1c-34-a4     dynamic  
      172.15.5.39           f0-92-1c-02-c8-5c     dynamic  
      172.15.5.41           fc-15-b4-1c-69-64     dynamic  
      172.15.5.255          ff-ff-ff-ff-ff-ff     static   
      224.0.0.22            01-00-5e-00-00-16     static   
      224.0.0.252           01-00-5e-00-00-fc     static   
      225.0.0.1             01-00-5e-00-00-01     static   
    Interface: 172.15.28.20 --- 0x11
      Internet Address      Physical Address      Type
      172.15.28.1           00-08-e3-ff-fd-90     dynamic  
      172.15.28.21          f0-92-1c-02-c8-58     dynamic  
      224.0.0.22            01-00-5e-00-00-16     static   
      224.0.0.252           01-00-5e-00-00-fc     static   
      225.0.0.1             01-00-5e-00-00-01     static    
    Before, there was an error on routes applied on server UIOMATRP-EXMB01:
    IPv4 Route Table
    ===========================================================================
    Active Routes:
    Network Destination        Netmask          Gateway       Interface  Metric
              0.0.0.0          0.0.0.0       172.15.4.1      172.15.5.38    266
            127.0.0.0        255.0.0.0         On-link         127.0.0.1    306
            127.0.0.1  255.255.255.255         On-link         127.0.0.1    306
      127.255.255.255  255.255.255.255         On-link         127.0.0.1    306
          169.254.0.0      255.255.0.0         On-link      169.254.1.11    261
         169.254.1.11  255.255.255.255         On-link      169.254.1.11    261
      169.254.255.255  255.255.255.255         On-link      169.254.1.11    261
           172.15.4.0    255.255.254.0         On-link       172.15.5.38    266
          172.15.5.38  255.255.255.255         On-link       172.15.5.38    266
         172.15.5.255  255.255.255.255         On-link       172.15.5.38    266
          172.15.28.0    255.255.254.0         On-link      172.15.28.20    266
         172.15.28.20  255.255.255.255         On-link      172.15.28.20    266
        172.15.29.255  255.255.255.255         On-link      172.15.28.20    266
          172.30.32.0    255.255.254.0      172.15.28.1      172.15.5.38     11 -------------------Error
          172.30.32.0    255.255.254.0      172.15.28.1     172.15.28.20     11
            224.0.0.0        240.0.0.0         On-link         127.0.0.1    306
            224.0.0.0        240.0.0.0         On-link      169.254.1.11    261
            224.0.0.0        240.0.0.0         On-link      172.15.28.20    266
            224.0.0.0        240.0.0.0         On-link       172.15.5.38    266
      255.255.255.255  255.255.255.255         On-link         127.0.0.1    306
      255.255.255.255  255.255.255.255         On-link      169.254.1.11    261
      255.255.255.255  255.255.255.255         On-link      172.15.28.20    266
      255.255.255.255  255.255.255.255         On-link       172.15.5.38    266
    EOOn the second server
    GYESITEA-EXMB02, the network is not reachable:
    C:\Windows\system32>route add 172.15.28.20 mask 255.255.255.255 172.30.32.1 if 13 -----à the
    route was forced with the nic index 13 to the IP address 172.15.28.20
    OK!
    C:\Windows\system32>route print
    ===========================================================================
    interface List
    13...9c b6 54 93 fd 7c ......HP FlexFabric 10Gb 2-port 534FLB Adapter  #59
    12...9c b6 54 93 fd 78 ......HP FlexFabric 10Gb 2-port 534FLB Adapter  #58
    16...02 ce fe 26 83 9f ......Microsoft Failover Cluster Virtual Adapter
      1...........................Software Loopback Interface 1
    14...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter
    15...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2
    17...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #3
    ===========================================================================
    IPv4 Route Table
    ===========================================================================
    Active Routes:
    Network Destination        Netmask          Gateway       Interface  Metric
              0.0.0.0          0.0.0.0       172.30.8.1     172.30.8.108    266
            127.0.0.0        255.0.0.0         On-link         127.0.0.1    306
            127.0.0.1  255.255.255.255         On-link         127.0.0.1    306
      127.255.255.255  255.255.255.255         On-link         127.0.0.1    306
          169.254.0.0      255.255.0.0         On-link     169.254.3.180    261
        169.254.3.180  255.255.255.255         On-link     169.254.3.180    261
      169.254.255.255  255.255.255.255         On-link     169.254.3.180    261
         172.15.28.20  255.255.255.255      172.30.32.1     172.30.32.21     11 --------------route forced and applied 
           172.30.8.0    255.255.254.0         On-link      172.30.8.108    266
         172.30.8.108  255.255.255.255         On-link      172.30.8.108    266
         172.30.9.255  255.255.255.255         On-link      172.30.8.108    266
          172.30.32.0    255.255.254.0         On-link      172.30.32.21    266
         172.30.32.21  255.255.255.255         On-link      172.30.32.21    266
        172.30.33.255  255.255.255.255         On-link      172.30.32.21    266
            224.0.0.0        240.0.0.0         On-link         127.0.0.1   
    306
            224.0.0.0        240.0.0.0         On-link     169.254.3.180    261
            224.0.0.0        240.0.0.0         On-link      172.30.8.108    266
            224.0.0.0        240.0.0.0         On-link      172.30.32.21    266
      255.255.255.255  255.255.255.255         On-link         127.0.0.1    306
      255.255.255.255  255.255.255.255         On-link     169.254.3.180    261
      255.255.255.255  255.255.255.255         On-link      172.30.8.108    266
      255.255.255.255  255.255.255.255         On-link      172.30.32.21    266
    ===========================================================================
    C:\Windows\system32>tracert 172.15.28.20
    Tracing route to 172.15.28.20 over a maximum of 30 hops
      1  General failure.
    Trace complete.
    C:\Windows\system32>tracert 172.15.28.20
    Tracing route to 172.15.28.20 over a maximum of 30 hops
      1  GYESITEA-EXMB02.xxxxxxxxxx [172.30.32.21]  reports: Destination host
    unreachable.
    Trace complete.
    Regards. Cristian V.

  • Windows Server 2012 R2 Backup problem

    I'm unable to backup a client PC It repeatedly says there is insufficient space but the Volume is 3Tb with only about 150Gb used for Server folders.  Looking at other reports one solution is to add a further volume but I have no more space and it's
    why I bought a 3Tb HDD.  A fix for that was promised in 2012.  Can someone please point me to it?  The 3 individual volumes on the client computer all have ample space on them for Shadow copy.  WHS 2011 didn't have this problem.  Thank
    you

    Do you have a copy of the backup log?
    Robert Pearman SBS MVP
    itauthority.co.uk |
    Title(Required)
    Facebook |
    Twitter |
    Linked in |
    Google+

  • Windows Server 2012 DHCP Event ID: 20291

    Hi,
    We have a DHCP failover set up with the default settings.
    We have always noticed numerous Event ID: 20291 errors in the Event Log. After following the instructions installing patches KB2919355 and KB2955135, deleting the failover relationship, and recreating it, we're still getting numerous errors with different
    scopes, and the error repeats repeatedly for the same IP. Sometimes users would get duplicate IP address error.
    When we click on "Display Statistics" on various scopes for each partner, they show different numbers as far as how many IPs are leased by each.
    Any ideas on what this could mean? We're ready to just remove the failover relationship completely and go back to split scope.
    http://blogs.technet.com/b/teamdhcp/archive/2014/02/26/dhcp-failover-patch-to-address-a-reservation-issue-and-another-issue-related-to-failover-partner-not-accepting-state-transition-from-bad-address-gt-active-has-been-released.aspx?pi47623=2
    http://support.microsoft.com/en-us/kb/2955135
    Source: Microsoft-Windows-DHCP-Server
    Date: date/time
    Event ID: 20291
    Task Category: DHCP Failover
    Level: Error
    User: NETWORK SERVICE
    Computer: DHCP-NODE
    Description: A BINDING-ACK message with transaction id: Transaction_Number was sent for IP address: IP_Address with reject reason: (Reject Reason Unknown) to partner server: DHCP_Partner_Server for failover relationship: DHCP_Failover_Relationship_Name.

    Hi,
    According to your description, my understanding is that DHCP failover with load sharing mode, Event Log displays numerous Event ID: 20291, and the error repeats repeatedly for the same IP.
    As KB 2955135 mentioned that Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section. If both servers are Windows Server 2012 R2, please install KB3000850(November 2014 update rollup
    for Windows Server 2012 R2), download link:
    http://www.microsoft.com/en-us/download/details.aspx?id=44975
    Note:
    Before you install this update, you have to first remove the failover relationship, install the update to both DHCP nodes and restart them, and then reestablish the failover relationship.
    Best Regards,
    Eve Wang
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Download Updates for Windows Server 2012 R2 Security Baseline..every time I open SCM

    Each and every time I open SCM, I am prompted to download the Windows Server 2012 R2 Security Baseline 1.0 Fr, August 15 2004...   Doesn't matter if I've installed it before or not.  
    Anyone else seeing this problem?  Does anyone know why this is happening or how I can get it to stop?   I tried uninstalling SCM and reinstalling, but the problem continues. 
    SCM is installed on a Windows 7 virtual machine, if that is relevant. 
    Thank you,
    Rob

    Same issue here. Shame MS doesn't put more resources on this tool.

  • CF11 install problem on WIndows server 2012 R2

    We have a new install windows server 2012 R2 with a new install CF11 standard installed on C drive. Everything is 64bit. The CF administrator site and login works fine.  cfm files will not serve up in the default directory, but IIS shows htm files fine.  CF administrator runs fine.
    Web Server Config tool will only show "None" in the IIS Web Site box.  The usual CGI, APS, etc have been installed on IIS.  In fact IIS and CF11 have been reinstalled.  wsconfig.exe manual run shows no errors.
    The problem is that any call to a cfm template results in an error (html pages serve fine):
    HTTP Error 500.0 - Internal Server Error
    The page cannot be displayed because an internal server error has occurred.
    Detailed Error Information:
    Module       IsapiModule
    Notification       ExecuteRequestHandler
    Handler       cfmHandler
    Error Code       0x8007007f
    Requested URL       http://localhost:80/default.cfm
    Physical Path       C:\inetpub\wwwroot\default.cfm
    Can anybody give any suggestions for troubleshooting?  No logs seem to show any information that helps.

    Fixed the problem......... it is not a CF problem alone but and mostly an IIS problem ....
    1) remove IIS completely...... including the inetpub directory..... remove .NET Extensibility from server manager under Application Development if inetpub in use error is present... inetpub has to be deleted.
    2) reboot
    3) reinstall IIS and enable all the usual stuff, ie, CGI, ISAPI, .NET, ASP , WebSocket Protocol, etc under Application Development
    4) restart IIS and CF
    5) Set Web Server Config to  "All"
    60 restart IIS and CF
    The trick to completely reinstall IIS and that is only done if you can delete the inetpub folder under root drive.

  • Hyper link of public image(hyperlink or image) can not be saved on windows server 2012 and sharepoint 2010 problem

    hyper link of public image(hyperlink or image) can not be saved on windows server 2012 and sharepoint 2010 problem, is this a bug?
    thanks for any reply.
    Rosone

    It is not a bug, you might be using IE in Windows server 2012 and and browser might be restricting your site actions to respond properly.
    Check this in a different browser or access site in a differ OS.
    Adnan Amin MCT, SharePoint Architect | If you find this post useful kindly please mark it as an answer.

  • Problems PXE booting Gen 2 Virtual Machines after Upgrading to Windows Server 2012 R2

    My Current Setup: 
    I have two virtual machines set up with Hyper V on my Windows Server 2012 Server.
    VM1: Configured to boot from an ISO file and runs Clonezilla server. 
    VM2: Configured to PXE boot using a legacy network adapter, and with a passthrough 250Gb hard disk. 
    These two VMs are connected to an external Virtual Switch, which allows physical machines to PXE boot to the Clonezilla server. 
    For the past few months I have been using this setup for two purposes:
    1. To clone physical machines to the Clonezilla virtual server (as a backup).
    2. To restore those image to the second VM if I find that need to get access to the files on the original image.. 
    This has worked perfectly, except for the fact that the speed of the legacy network adapter on the second VM (which is required to PXE boot) is very slow. But I know this is because of the limitations in how the legacy adapter works... 
    Now my problem:
    I found out that Gen 2 VMs allow you to PXE boot without having use a legacy network adapter, allowing me to image back to the VM faster. So I upgraded the Server to Server 2012 R2 . I then created the same two virtual machines on the R2 server. I can still
    PXE boot the Gen 1 VM to the Clonezilla Server but I cannot get the Gen 2 VMs to PXE boot properly. They get an IP address from the Clonezilla Server but then just stop with the following screen. (note: I have disabled the Secure Boot). 
    Are Gen 2 VMs unable to pull down images from anything other than a WDS Server? 

    Hi J,
    >>Unfortunately WDS is not a solution for us as it is dependent on the PC being part of a domain
    If you would like to make the client not join to the domain, please check the box before “Do not join the client to a domain after an installation.”  In addition, make sure not to set the client to the domain in the unattend file and do not prestage
    the computer in AD. "
    It is quoted from following thread :
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/1026c3a9-0a10-4a58-a48f-5391659a96c8/wds-set-unattend-file-for-workgroup?forum=winserversetup
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Printing Problem with Epson LX-300+ii and LX-310 in Windows Server 2012 R2 64-bit

    I recently installed Windows Server 2012 R2 64-Bit.
    We have Printer Epson LX-300+ii and LX-310 (dot-matrix) that we share among users. Each user access the Server using Remote Desktop. From previous experience with Windows Server 2008, I knew that these printers will be problematic, especially regarding
    the Easy Print driver.
    And I was right, using the Easy Print driver, I got the following result:
    And so, I did manual mapping & disable the "Use Remote Desktop Easy Print printer driver first". Haha, what a surprise, I got the following result:
    And so I uninstalled the printer driver, and install it again, thinking that I might chose a wrong driver, but.... same result. I know for sure that I chose the correct driver.
    Next, I tried connecting the printer DIRECTLY to the server. Log-in to the Server directly,
    not using Remote Desktop. And tried printing again, haha... really... what a surprise... I got the same problem here !!!
    So now I know the problem is not the Easy Print driver, not mapping or registry problem either. It's the print driver. This is SUPER FRUSTRATING, I tried the same driver from the same CD in Windows 8.1 64-Bit with no problem. I tried it too in Windows 7
    32-Bit with no-problem either. But somehow, this driver is problematic in Windows Server 2012 R2.
    Any help? Anybody else bump into this same problem ? I'm close to giving up, been spending too much time figuring out this damn thing.
    Andy

    Hi Bulent Sahin,
    Thank you for your reply, I tried IBM Graphics driver, but the result is equally as bad. But your answer inspire me to try different drivers. And so, the closest & best driver that I could use now is EPSON ESC/P 9pin V4 Class Driver
    It's not as good as I would expect, but at least now, it's acceptable & readable. I can't believe that I'm the only one who have this problem
    Thank you Mr. Sahin

  • Troubleshoot problems with installing updates on Windows Server 2012 Standart Edition

    When trying to install last update, receiving next errors:
    Installation Failure: Windows failed to install the following update with error 0x80070020: Cumulative Security Update for Internet Explorer 10 for Windows Server 2012 (KB3003057).
    Security Update for Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 8 and Windows Server 2012 x64 (KB2978127).
    Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB2982998).
    Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB2993958).
    Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3002885).
    Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3010788).
    Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Microsoft .NET Framework 3.5 on Windows 8 and Windows Server 2012 for x64-based Systems (KB2978121).
    Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3006226).
    Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3005607).
    Installation Failure: Windows failed to install the following update with error 0x80070020: Update for Windows Server 2012 (KB2975331).
    Installation Failure: Windows failed to install the following update with error 0x80070020: Update for Windows Server 2012 (KB3008627).
    Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3011780).
    Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3003743).
    This problem reproduced on all my web-servers (Windows Server 2012 Std). How can I fix these problems

    Hi,
    Windows update error 0x80070020 can occur if a program is interfering with the automatic update process.
    Restart your computer or restart your computer in safe mode with network, then try to install the updates. Detailed information you may reference the link below(this applies also to Windows Server 2012 ):
    You receive error 0x80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install updates
    http://support.microsoft.com/kb/883825/en-us
    If the problem still exits, open Run, type %windir% and hit
    Enter, find a text file named WindowsUpdate, uploaded the log file.
    Best Regards,           
    Eve Wang

  • Problem with windows server 2012

    i have a problem with window server 2012 , i remove some feature in server manager and it restart .but  when i log in into my account it shows  a black screen with cmd window with this massage "C:\users\Administrator>." please
    help me. i dont know whats happend and i cannt work with this
    thanks a lot

    You may follow this link to get it solved 
    http://www.jon-tupitza.com/2014/02/18/enabling-the-windows-server-2012-r2-gui/
    http://www.arabitpro.com

  • Can I download the trial version of windows server 2012 onto a laptop running windows 8.1?

    Can I download the trial version of windows server 2012 onto a laptop running windows 8.1 and create a dual boot?

    Have a look:
    http://blogs.technet.com/b/blainbar/archive/2012/09/25/step-by-step-4-ways-to-dual-boot-microsoft-windows-8-and-windows-server-2012-with-or-without-windows-7.aspx
    http://www.msdonkey.com/server/dual-booting-windows-8-1-and-windows-server-2012-r2-from-vhd/
    Regards,
    Rafic
    If you found this post helpful, please give it a "Helpful" vote.
    If it answered your question, remember to mark it as an "Answer".
    This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

  • Windows server 2012 RDP Session - Default Start Menu Layout Downloaded Apps Not Displayed

    Hi,
    Hopefully someone can help me to resolve a problem that's holding me back a little regarding the start menu for all users that connect to remote desktop sessions on Windows Server 2012.
    I would like all users to have the same default application set upon login. Using a temporary user called 'Start Menu' I created the exact layout that I require all users to have. I installed the tile apps from the store with the 'Start Menu' user.
    I then used the PowerShell command:
    PS C:\> Export-StartLayout -Path "C:\Layouts\Marketing.xml"-As XML
    This then gave me the following XML file:
    <launcher version="2"><view name="Start"><group><tile AppID="AccuWeather.AccuWeatherforWindows8_8zz2pj9h1h1d8!App" size="wide310x150" FencePost="0"/><tile AppID="Microsoft.BingNews_8wekyb3d8bbwe!AppexNews"
    size="wide310x150" FencePost="0"/><tile AppID="Microsoft.Windows.Desktop" size="wide310x150" FencePost="0"/><tile AppID="{1AC14E77-02E7-4E5D-B744-2EB1AE5198B7}\logoff.exe" size="square150x150"
    FencePost="0"/></group><group name="Office Apps &amp; Storage"><tile AppID="{6D809377-6AF0-444B-8957-A3773F02200E}\Microsoft Office\Office15\WINWORD.EXE" size="square150x150" FencePost="0"/><tile
    AppID="Microsoft.SkyDrive.Desktop" size="square150x150" FencePost="0"/><tile AppID="{6D809377-6AF0-444B-8957-A3773F02200E}\Microsoft Office\Office15\EXCEL.EXE" size="square150x150" FencePost="0"/><tile
    AppID="C27EB4BA.Dropbox_xbfy0k16fey96!App" size="square150x150" FencePost="0"/><tile AppID="{6D809377-6AF0-444B-8957-A3773F02200E}\Microsoft Office\Office15\POWERPNT.EXE" size="square150x150" FencePost="0"/><tile
    AppID="F:\" size="square150x150" FencePost="0"/><tile AppID="{6D809377-6AF0-444B-8957-A3773F02200E}\Microsoft Office\Office15\MSPUB.EXE" size="square150x150" FencePost="0"/><tile AppID="{1AC14E77-02E7-4E5D-B744-2EB1AE5198B7}\calc.exe"
    size="square70x70" FencePost="1"/><tile AppID="{1AC14E77-02E7-4E5D-B744-2EB1AE5198B7}\notepad.exe" size="square70x70" FencePost="0"/></group><group name="Mail &amp; Calendar"><tile
    AppID="microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Mail" size="square150x150" FencePost="0"/><tile AppID="microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Calendar"
    size="square150x150" FencePost="0"/><tile AppID="10631PaolosAdventures.559711D6C5976_ntpp077zx3tm0!App" size="square150x150" FencePost="0"/><tile AppID="BRICKMAKERS.gmailcalendar_wps5hyj3streg!App"
    size="square150x150" FencePost="0"/></group><group name="Internet &amp; Social Media"><tile AppID="Facebook.Facebook_8xx8rvfyw5nnt!App" size="square70x70" FencePost="1"/><tile
    AppID="9E2F88E3.Twitter_wgeqdkkx372wm!App" size="square70x70" FencePost="0"/><tile AppID="Microsoft.SkypeApp_kzf8qxf38zg5c!App" size="square70x70" FencePost="0"/><tile AppID="1168WindowsDexter.LinkedInHD_b3sam9s7hsbar!App"
    size="square70x70" FencePost="0"/><tile AppID="19120CensoredUser.HyperforYouTube_c0tqyanwsgfn6!App" size="square150x150" FencePost="0"/><tile AppID="Microsoft.InternetExplorer.Default"
    size="square150x150" FencePost="0"/><tile AppID="eBayInc.eBay_1618n3s9xq8tw!App" size="square150x150" FencePost="0"/></group></view></launcher>
    Using GPO I then applied this layout to all users. However when I login as any other users I only actually get the OneDrive app and none of the others.
    Can someone please point me in the right direction. The store can not be run as administrator and the 'Start Menu' user had administrator rights when the apps were added from the store.

    Hi,
    Thank you for posting in Windows Server Forum.
    You can check the GPO setting “pin Apps to Start when installed” which will pin the new program to start and other setting “Start Screen Layout” which will lets you specify the Start screen layout for users and prevents them from changing
    its configuration. You can find this setting under below mention path.
    <Computer Configuration> | <User Configuration> \Administrative Templates\Start Menu and Taskbar
    In addition please check beneath article.
    Customize the Start Screen
    http://technet.microsoft.com/en-us/library/jj134269.aspx
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • Where do I download a Windows Server 2012 R2 .iso from, for use with Hyper-v?

    Hello,
    Where do I download a Windows Server 2012 R2 Standard .iso from, for use with Hyper-v?
    The only official download I can find is the evaluation version from here:
    http://www.microsoft.com/en-us/evalcenter/evaluate-windows-server-2012-r2
    Is it recommended to use the evaluation version and then license it to make it a full version, or is there a better official download?
    Thanks
    Paul

    Hi Brian,
    I don't personally have an MSDN subscription.
    So using the evaluation versions is ok?
    With a Windows Server 2012 R2 license, you can have two
    Windows Server 2012 R2 virtual
    machines, so I assume I can turn evaluation version VMs into full fledged servers?
    Thanks
    Paul
      How did you acquire a Server 2012 R2 license without any installation media? Can you get the installation media from the same source? How did you install 2012 R2 on the host?
    Bill

Maybe you are looking for