Windows Server 2012 R2 KMS - STATUS_SUCCESS

We are in the process of setting up a Windows Server 2012 R2 KMS server to replace our Windows Server 2008 R2 machine.
After installing the Volume Activation role and going through the volume activation tools 'wizard' i'm running into a problem.
When i try to commit the settings (like firewall exceptions, custom dns zones) i get an error stating the following:
The following error has occurred. Please resolve the error and try again.
Description:
STATUS_SUCCESS
And none of the settings have been aplied, and there are no eventlog entries stating whats wrong.
When i deploy a Windows Server 2012 (non R2) machine and go through the same process commiting the same settings works fine.
Anybody know what might be wrong here?

Man, i've been checking things for days, and THIS is the solution? :)
Thanks for the help man, this fixed it for me too!
... why something like this doesn't generate a real error code or something is beyond me.....

Similar Messages

Not working properly Computer Browser service in Windows Server 2012

Good afternoon.
Migrated from 2003 to 2012 Active Directory, all is good, but the service Computer Browser in Windows Server 2012 is not working properly.
Online, there are several hundred computers, one network, no segments. PDC is the Master Browser, it is in my list of all the computers, but gives customers or Backup Browser computers only part, and in alphabetical order, giving the first 70 computers and
all.
Looked packet sniffer:
Microsoft Windows Lanman Remote API Protocol
Entry Count: 70
Available Entries: 251
So on Master Browser shows 251 computer, and the client 70.
If disabled on Windows Server 2012 Service Computer Browser, Master Browser is a computer running Windows Server 2003. He gives all computers.
What is the problem, how to get Windows Server 2012 to work correctly as a Master Browser?

More info. I have high lighted in bold where the issue is. This is a massive headache for me at the moment
Frame: Number = 377, Captured Frame Length = 182, MediaType = ETHERNET
- Ethernet: Etype = Internet IP (IPv4),DestinationAddress:[00-13-72-52-6E-A1],SourceAddress:[00-1E-0B-2B-68-DD]
- DestinationAddress: Dell Inc. 526EA1 [00-13-72-52-6E-A1]
     Rsv: (000000..)
     UL: (......0.) Universally Administered Address
     IG: (.......0) Individual address (unicast)
- SourceAddress: 001E0B 2B68DD [00-1E-0B-2B-68-DD]
     Rsv: (000000..)
     UL: (......0.) Universally Administered Address
     IG: (.......0) Individual address (unicast)
    EthernetType: Internet IP (IPv4), 2048(0x800)
- Ipv4: Src = 10.44.46.101, Dest = 10.44.44.14, Next Protocol = TCP, Packet ID = 14025, Total IP Length = 168
- Versions: IPv4, Internet Protocol; Header Length = 20
     Version:      (0100....) IPv4, Internet Protocol
     HeaderLength: (....0101) 20 bytes (0x5)
- DifferentiatedServicesField: DSCP: 0, ECN: 0
     DSCP: (000000..) Differentiated services codepoint 0
     ECT: (......0.) ECN-Capable Transport not set
     CE:   (.......0) ECN-CE not set
    TotalLength: 168 (0xA8)
    Identification: 14025 (0x36C9)
- FragmentFlags: 16384 (0x4000)
     Reserved: (0...............)
     DF:       (.1..............) Do not fragment
     MF:       (..0.............) This is the last fragment
     Offset:   (...0000000000000) 0
    TimeToLive: 128 (0x80)
    NextProtocol: TCP, 6(0x6)
    Checksum: 0 (0x0)
    SourceAddress: 10.44.46.101
    DestinationAddress: 10.44.44.14
- Tcp: Flags=...AP..., SrcPort=65372, DstPort=NETBIOS Session Service(139), PayloadLen=128, Seq=1910965363 - 1910965491, Ack=580319796, Win=252 (scale factor 0x8) = 64512
    SrcPort: 65372
    DstPort: NETBIOS Session Service(139)
    SequenceNumber: 1910965363 (0x71E70473)
    AcknowledgementNumber: 580319796 (0x2296FA34)
- DataOffset: 80 (0x50)
     DataOffset: (0101....) 20 bytes
     Reserved:   (....000.)
     NS:         (.......0) Nonce Sum not significant
- Flags: ...AP...
     CWR:    (0.......) CWR not significant
     ECE:    (.0......) ECN-Echo not significant
     Urgent: (..0.....) Not Urgent Data
     Ack:    (...1....) Acknowledgement field significant
     Push:   (....1...) Push Function
     Reset: (.....0..) No Reset
     Syn:    (......0.) Not Synchronize sequence numbers
     Fin:    (.......0) Not End of data
    Window: 252 (scale factor 0x8) = 64512
    Checksum: 0x6F65, Disregarded
    UrgentPointer: 0 (0x0)
    TCPPayload: SourcePort = 65372, DestinationPort = 139
- Nbtss: SESSION MESSAGE, Length =124
    PacketType: SESSION MESSAGE, 0(0x00)
- Flags: Add 0 to Length
     Reserved: (0000000.)
     Extension: (.......0)Add 0 to Length
    Length: 124(0x7C)
- SMB: C; Transaction, Remote Administration Protocol, FileName = \PIPE\LANMAN
    Protocol: SMB
    Command: Transaction 37(0x25)
- NTStatus: 0x0, Facility = FACILITY_SYSTEM, Severity = STATUS_SEVERITY_SUCCESS, Code = (0) STATUS_SUCCESS
     Code:     (................0000000000000000) (0) STATUS_SUCCESS
     Facility: (...0000000000000................) FACILITY_SYSTEM
     Customer: (..0.............................) NOT Customer Defined
     Severity: (00..............................) STATUS_SEVERITY_SUCCESS
- SMBHeader: Command, TID: 0x2001, PID: 0x276C, UID: 0x3801, MID: 0x0140
   - Flags: 24 (0x18)
      LockAndRead:     (.......0) LOCK_AND_READ and WRITE_AND_UNLOCK NOT supported (Obsolete) (SMB_FLAGS_LOCK_AND_READ_OK)
      NoAck:           (......0.) An ACK response is needed (SMB_FLAGS_SEND_NO_ACK[only applicable when SMB transport is NetBIOS over IPX])
      Reserved_bit2:   (.....0..) Reserved (Must Be Zero)
      CaseInsensitive: (....1...) SMB paths are case-insensitive (SMB_FLAGS_CASE_INSENSITIVE)
      Canonicalized:   (...1....) Canonicalized File and pathnames (Obsolete) (SMB_FLAGS_CANONICALIZED_PATHS)
      Oplock:          (..0.....) Oplocks NOT supported for OPEN, CREATE & CREATE_NEW (Obsolete) (SMB_FLAGS_OPLOCK)
      OplockNotify:    (.0......) Notifications NOT supported for OPEN, CREATE & CREATE_NEW (Obsolete) (SMB_FLAGS_OPLOCK_NOTIFY_ANY)
      FromServer:      (0.......) Command - SMB is being sent from the client (SMB_FLAGS_SERVER_TO_REDIR)
   - Flags2: 51207 (0xC807)
      KnowsLongFiles:            (...............1) Understands Long File Names (SMB_FLAGS2_KNOWS_LONG_NAMES)
      KnowsEas:                  (..............1.) Understands extended attributes (SMB_FLAGS2_KNOWS_EAS)
      SmbSecuritySignature:      (.............1..) Security signatures enabled (SMB_FLAGS2_SMB_SECURITY_SIGNATURE)
      Compressed:                (............0...) Compression Disabled for REQ_NT_WRITE_ANDX and RESP_READ_ANDX (SMB_FLAGS2_COMPRESSED)
      SecuritySignatureRequired: (...........0....) Security Signatures are NOT required (SMB_FLAGS2_SMB_SECURITY_SIGNATURE_REQUIRED)
      Reserved_bit5:             (..........0.....) Reserved (Must Be Zero)
      IsLongName:                (.........0......) DO NOT use Long File Names (SMB_FLAGS2_IS_LONG_NAME)
      Reserved_bits7_9:          (......000.......) Reserved (Must Be Zero)
      ReparsePath:               (.....0..........) NOT a Reparse path (SMB_FLAGS2_REPARSE_PATH)
      ExtendedSecurity:          (....1...........) Aware of extended security (SMB_FLAGS2_EXTENDED_SECURITY)
      Dfs:                       (...0............) NO DFS namespace (SMB_FLAGS2_DFS)
      Paging:                    (..0.............) Read operation will NOT be permitted unless user has permission (NO Paging IO) (SMB_FLAGS2_PAGING_IO)
      NTStatus:                  (.1..............) Using 32-bit NT status error codes (SMB_FLAGS2_NT_STATUS)
      Unicode:                   (1...............) Using UNICODE strings (SMB_FLAGS2_UNICODE)
     PIDHigh: 0 (0x0)
     SecuritySignature: 0x0
     Unused: 0 (0x0)
     TreeID: 8193 (0x2001)
     ProcessID: 10092 (0x276C)
     UserID: 14337 (0x3801)
     MultiplexID: 320 (0x140)
- CTransaction:
     WordCount: 14 (0xE)
     TotalParameterCount: 32 (0x20)
     TotalDataCount: 0 (0x0)
     MaxParameterCount: 8 (0x8)
     MaxDataCount: 4200 (0x1068)
     MaxSetupCount: 0 (0x0)
     Reserved: 0 (0x0)
   - Flags: Do NOT disconnect TID
      Disconnect: (...............0) Do NOT disconnect TID
      NoResponse: (..............0.) Server response to the client
      Reserved:   (00000000000000..) Reserved
     Timeout: 5000 milli sec(s)
     Reserved2: 0 (0x0)
     ParameterCount: 32 (0x20)
     ParameterOffset: 92 (0x5C)
     DataCount: 0 (0x0)
     DataOffset: 0 (0x0)
     SetupCount: 0 (0x0)
     Reserved3: 0 (0x0)
     ByteCount: 61 (0x3D)
   - RemoteAPIBuffer:
    - FileName: \PIPE\LANMAN
     - Align: 1 Bytes
        AlignBytes: Binary Large Object (1 Bytes)
       Name: \PIPE\LANMAN
      Pad1: Binary Large Object (2 Bytes)
- RAPRequest: NetServerEnum2 Request, InfoLevel = 1, SV_TYPE_ALL: All in NSNET
    RAPOpcode: NetServerEnum2
- ParameterDescriptor: WrLehDz; 4 send, 1 receive parameter
     Param: (W) WORD (send parameter, 16 bit integer)
     Param: (r) Receive buffer (format in data descriptor) (receive data, 0 bit integer)
     Param: (L) Receive buffer length (send/receive parameter, 16/16 bit integer)
     Param: (e) Entries read (receive data, 0 bit integer)
     Param: (h) WORD (receive parameter, 16 bit integer)
     Param: (D) DWORD (send parameter, 32 bit integer)
     Param: (z) ASCIIZ (send parameter, 8 bit integer)
     Param: ASCII NUL (string terminator)
- DataDescriptor: B16BBDz; data bytes send: 0, receive: 34
   - Datum: (B) BYTE[16] (receive data, 8 bit integer)
      Datum: (B) BYTE (receive data, 8 bit integer)
      Digit: 1
      Digit: 6
     Datum: (B) BYTE (receive data, 8 bit integer)
     Datum: (B) BYTE (receive data, 8 bit integer)
     Datum: (D) DWORD (receive data, 32 bit integer)
     Datum: (z) ASCIIZ* (receive data offset, 32 bit integer)
     Datum: ASCII NUL (string terminator)
- NetServerEnum2: SV_TYPE_ALL: All in NSNET
     InfoLevel: (1) SERVER_INFO_1
     ReceiveBufferSize: 4200 (0x1068)
   - ServerType: SV_TYPE_ALL: All
      Workstation:      (...............................1) All workstations
      Server:           (..............................1.) All computers with the server service running
      Sqlserver:        (.............................1..) All running Microsoft SQL Server
      DomainCtrl:       (............................1...) All primary domain controllers
      DomainBakctrl:    (...........................1....) All backup domain controllers
      TimeSource:       (..........................1.....) All Time servers
      AFP:              (.........................1......) All Apple File Protocol servers
      Novell:           (........................1.......) All Novell servers
      DomainMember:     (.......................1........) All LAN Manager 2.x domain members
      PrintqServer:     (......................1.........) All print servers
      DialinServer:     (.....................1..........) All dial-in servers
      ServerUnix:       (....................1...........) All Unix/Xenix servers
      NT:               (...................1............) All Windows NT workstations or servers
      WFW:              (..................1.............) All Windows for Workgroups servers
      ServerMFPN:       (.................1..............) All Microsoft File and Print for NetWare servers
      ServerNT:         (................1...............) All non-domain controller servers
      PotentialBrowser: (...............1................) All servers that can run the browser service
      BackupBrowser:    (..............1.................) All backup browsers
      MasterBrowser:    (.............1..................) All master browsers
      DomainMaster:     (............1...................) All domain master browsers
      Reserved1:        (..........11....................)
      Windows:          (.........1......................) All Windows 95 or later
      DFS:              (........1.......................) All DFS root servers
      ClusterNT:        (.......1........................) All NT Clusters
      Terminalserver:   (......1.........................) All Terminal Servers
      ClusterVSNT:      (.....1..........................) All NT Cluster Virtual Server Names
      DCE:              (....1...........................) AllIBM DSS (Directory & Security Services)
      Reserved2:        (...1............................)
      AlternateXport:   (..1.............................) Return list for alternate transport
      LocalListOnly:    (.1..............................) Return local list only
      DomainEnum:       (1...............................) Enumerate primary domain
     Domain: NSNET
Then the reply;
   Frame: Number = 378, Captured Frame Length = 1514, MediaType = ETHERNET
+ Ethernet: Etype = Internet IP (IPv4),DestinationAddress:[00-1E-0B-2B-68-DD],SourceAddress:[00-13-72-52-6E-A1]
+ Ipv4: Src = 10.44.44.14, Dest = 10.44.46.101, Next Protocol = TCP, Packet ID = 27036, Total IP Length = 1500
+ Tcp: Flags=...A...., SrcPort=NETBIOS Session Service(139), DstPort=65372, PayloadLen=1460, Seq=580319796 - 580321256, Ack=1910965491, Win=253 (scale factor 0x8) = 64768
+ Nbtss: SESSION MESSAGE, Length =2013
+ SMB: R; Transaction, Remote Administration Protocol
- RAPResponse: NetServerEnum2 Response, Count = 31
    Win32ErrorCode: 0x00000000 - ERROR_SUCCESS - The operation completed successfully.
    Converter: 2251 (0x8CB)
- NetServerEnum2: Count = 31
     EntriesReturned: 31 (0x1F)
     EntriesAvailable: 31 (0x1F)
   + NetServerInfo1: APOLLO
   + NetServerInfo1: ARTEMIS
   + NetServerInfo1: ASKLEPIOS
   + NetServerInfo1: CASTOR
   + NetServerInfo1: DCC4503-131L
   + NetServerInfo1: DCC4503-155L
   + NetServerInfo1: DCC4503-157L
   + NetServerInfo1: DCC4503-161L
   + NetServerInfo1: DCC4503-171L
   + NetServerInfo1: DCC4503-172L
   + NetServerInfo1: DCC4503-175L
   + NetServerInfo1: DCC4503-177L
   + NetServerInfo1: DCC4503-183L
   + NetServerInfo1: DCC4503-184L
   + NetServerInfo1: DCC4503-185L
   + NetServerInfo1: DCC4503-188L
   + NetServerInfo1: DCC4503-196L
   + NetServerInfo1: DCC4503-197L
   + NetServerInfo1: DCC4503-199L
   + NetServerInfo1: DCC4503-202L
   + NetServerInfo1: DCC4503-203L
   + NetServerInfo1: DCC4503-205L
   + NetServerInfo1: DCC4503-210L
   + NetServerInfo1: DCC4503-213L
   + NetServerInfo1: DCC4503-219L
   + NetServerInfo1: DCC4503-220L
   + NetServerInfo1: DCC4503-228L
   + NetServerInfo1: DCC4503-233L
   + NetServerInfo1: DCC4503-234L
   + NetServerInfo1: DCC4503-236L
   + NetServerInfo1: DCC4503-241L
    StringData: Binary Large Object (586 Bytes)

Error 0x80072ee7 when activating Windows Server 2012 Standard ROK

I am installing windows server 2012 standard ROK onto a HP Proliant micorsever. I installed the product key using elevated command prompt (found instructions on hp site), but when I get to the point to activate the operating system using the following
command cscript C:\windows\system32\slmgr.vbs -ato, I get an error message --> 0x80072ee7 On a computer running Microsoft windows non-core edition. Why is this happening? From prior research that I've done do I need to install a KMS Client
key and if so what is the proper key for the OS that I am using?

Hi,
The 0x80072EE7 error code may occur if the client computer cannot find the correct IP address when it tries to resolve a URL for the Windows Update Web site or for the Microsoft Update Web site. This error may occur if the Hosts file contains a static IP
address also might occur due to one of the following reason.
• Programs or processes that interfere with Internet communications
• Resource issues on the computer
• High Internet activity
To resolve the error examine the Host file (under System32\driver\etc folder) and check that Make sure that the file does not list any static IP entries for the Windows Update Web site or for the Microsoft Update Web site. Mean time sharing the article with
you.
1. 0x80072EE7 error code
2. KB 836941
Hope it helps!
Thanks.

Upgrading Windows Server 2012 Essential Eval to Windows Server 2012 R2 Retail

I need to upgrade from Windows Server 2012 Essential Eval version to Windows Server 2012 R2 Retail. What would be the easiest way to upgrade if license $$ is not an issue? The Server is a DC. Would the following works:
1. Upgrade from Windows Server 2012 Essential Eval to Windows Server 2012 Essential Retail
2. Do a conversion from Windows Server 2012 Essential Retail to Windows Server 2012 Standard Retail (I suppose this just require several command line to enable the 2012 Standard)
3. Do an in-place upgrade from Windows Server 2012 Standard to Windows Server 2012 R2 Standard (there is no need to do migration, am I right?)
Thanks.

I just did a simulation using Hyper V. It seems that I'm able to do the upgrade sequence as described but I'm not sure whether there are any side effect that not yet surface out. Here is the details steps that I took:
1. Under Windows Server 2012 Essential Eval
convert the Windows Server Essential 2012 Eval to Windows Server Standard 2012 using the following command in an elevated command prompot
dism /online /set-edition:ServerStandard /productkey:xxxxx-xxxxx-xxxxx-xxxxx-xxxxx /accepteula
press "y" and return to restart as prompted
the productkey could be retail key or the KMS client keys (just for installation not for activiation)
2. After reboot, the system become Windows Server 2012 Standard
using admin account to login
add admin account to the Enterprise Admins group and Schema Admins group if not already done so, logout and login again
mount the Windows Server 2012 R2 Standard disk in, say, drive d:
in an elevated command prompt, go the following:
cd d:\support\adprep
.\adprep.exe /forestprep
.\adprep.exe /domainprep
double click on d: in explore to run the Windows Server 2012 R2 Standard setup
follow the instruction to complete the in-place upgrade from Windos Server 2012 to Windows Server 2012 R2
3. After reboot into Windows Server 2012 R2 Standard, go to the charms bar, select setting -> server info, it will mention the server is not activated, click on Activate Windows and key in the Windows Server 2012 R2 Standard retail key

Windows Server 2012 Standard License and VMs

Hi,
With one Window server 2012 Standard activated license, I will get 2 VMs. So is there a limit with Windows Server 2012 standard license I can stack and the the number of VMs I can create on one server or across servers (virtual environment). Consider that
all Windows server 2012 standard licenses are activated. If there is no limit on VM creation by add Standard license then why did Microsoft come with Data center licenses with unlimited VMs.
How does the standard license work on Vmware environment. Is there a limit on the number for VMs that we can create.
Please advise me.
Thanks.

If i had one server 2012 standard with its key, i could run it as a vm but not as a virtual host without having the license right?
a single WS2012STD license, allows you to run a server machine (hardware), if that hardware has no more than 2 processors. In this case, you can run 2 VMs, each VM is running WS2012STD. You can also run WS2012STD as the host hypervisor via Hyper-V.
So, that's really 3 OS installations, on the same 2proc machine. The limitation is that the host hypervisor OS is only permitted to do Hyper-V stuff, it's not permitted to use that OS for anything other than hypervisor functions.
If you implement in this way, you would only have purchased a single license for WS2012STD, so you would only have a single key, so you would use that key for the 3 OS installations.
If i bought the single server 2012 standard license, i'd be able to install it as a Host and activate with the key and it'd give me rights to run 2vms on it and for those vms i would have to have 2 keys to activate after installing server 2012 standart
software on them right?
see above.
if you buy via Volume Licensing, things change a little bit due to MAK/KMS keys (it gets a whole lot simpler :)
Sorry for being unclear on the clusters part, i meant HA/failover. we have 2 2008R2 enterprise servers in cluster with shared storage and i was trying to clarify how could i add more vms there.
assuming your failover solution involves traditional server hardware, each failover node is just another hardware machine, so, for each node you have to count up the procs and VMs, just as you would do for non-failover implementations.
if a server is installed and running/executing, it needs to be licensed.
with current configuration, each server is hosting 2vms and if anything happens single host can accommodate all four. I am assuming we have 2 enterprise licenses for them, but if i wanted to run 4vms on each host, we have to buy 2 more enterprise licenses
and install vm togerther with their keys?
There is no Enterprise for WS2012? (WS2012 has STD and DCE)
do you mean as in WS2008R2ENT ?
You can re-assign licenses from one machine to another machine (under the Volume Licensing terms. I'm not sure about Retail terms, you should check that). There are limitations on how often you can reassign licenses (no more than every 90days)
If hardware "fails", you are allowed to reassign the license in a shorter period than 90days.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Download the Evaluation: Windows Server 2012 R2 product key

Where do you obtain the product key information?
for the .iso download version to be functional

Hi Marz,
You can download Win2012 R2 from mentioned link
http://www.microsoft.com/en-us/server-cloud/products/windows-server-2012-r2/default.aspx#fbid=kyb2VoUOHw-
http://blogs.technet.com/b/firehose/archive/2013/06/25/system-center-2012-r2-now-available-for-download.aspx
and key is provided in mentioned link
http://technet.microsoft.com/en-us/library/jj612867.aspx
I have already downloaded it and checked it, it is working fine without issue.
If you have installed Evaulation version and unable to use KMS key then Try mentioned link, it is very helpful
http://www.doitfixit.com/index.php?option=com_content&view=article&id=192:upgrade-server-evaluation-version&catid=48:active-directory&Itemid=53
http://workinghardinit.wordpress.com/tag/windows-server-2012-r2/
Steps are
1. check Current Edition
DISM /online /Get-CurrentEdition
2. Check Target Edition
DISM /online /Get-TargetEditions
3.
DISM /online /Set-Edition:ServerStandard /ProductKey:D2N9P-3P6X9-2R39C-7RTCD-MDVJX /AcceptEula
or
DISM /online /Set-Edition:ServerDatacenter /ProductKey:W3GGN-FT8W3-Y4M27-J84CP-Q3VJ9 /AcceptEula
Now you can install the new Windows 2012 R2 KMS key. If you run in to any issues here, restarting the KMS Service can help (("net stop sppsvc" and "net start sppsvc") . Try that first.
4.
slmgr.vbs /ipk D2N9P-3P6X9-2R39C-7RTCD-MDVJX
or
slmgr.vbs /ipk W3GGN-FT8W3-Y4M27-J84CP-Q3VJ9
once it done, we can cross check the time period
5
slmgr.vbs /dlv
Kirpal Singh

SharePoint Foundation 2013 installed on Windows Server 2012 not sending out email notification

I have a server where i installed SP Foundation 2013 on top of Windows Server 2012. I have configured the SMTP as well as the outgoing SMTP in Central Administration
of SharePoint. When i create an alert on a document library, its did not sent any email notification on the changes made to the document in the document library. So, i created a workflow to send out email using SPD2013. The workflow run, but it cannot sent
out email with error saying that outgoing email is not configured correctly. I have checked with another server which i installed SP foundation 2013 on top of Windows Server 2008 R2 - its sending out email just fine using same configuration and outgoing SMTP.
I need help to resolve this issue or at least the cause of the problem.
Any help is greatly appreciated.

Try below:
http://social.technet.microsoft.com/wiki/contents/articles/13771.troubleshooting-steps-for-sharepoint-alert-email-does-not-go-out.aspx
Go to Central Admin ---->Operations----->outgoing email settings and verify that SMTP server is mentioned correctly
2) Test the connectivity with the SMTP server.
In order to do that follow these steps:
Open cmd
telnet <SMTP server name> 25 ( We connect smtp server to the port 25)
you should see a response like this 220 <servername> Microsoft ESMTP MAIL Service, Version: 6.0.3790.3959 ready at date and time
Beware that different servers will come up with different settings but you will get something
If you dont get anything then there could be 2 possible reasons, either port 25 is blocked or
the smtp server is not responding.
For testing response from your server
For testing response say ehlo to it.
Type :
ehlo <servername>
output:
250 <servername> Hello [IP Address]
Now a test mail can be sent from that SharePoint server.
Now we need to enter the From address of the mail.
Type :
mail from: [email protected]
output:
250 2.1.0 [email protected]….Sender OK
It's time to enter the recepient email address.
Type : rcpt to: [email protected]
output:
250 2.1.5 [email protected]
Now we are left with the data of the email. i.e. subject and body.
Type : data
output:
354 Start mail input; end with <CRLF>.<CRLF>
Type:
subject: this is a test mail
Hi
This is test mail body
I am testing SMTP server.
Hit Enter, then . and then Enter.
output:
250 2.6.0 <<servername>C8wSA00000006@<servername>> Queued mail for delivery
Type: quit
output:
221 2.0.0 <servername> Service closing transmission channe
3) Check alerts are enabled for your web application
verify if the windows timer service is running or not.
Run this stsadm command to check that
Stsadm.exe -o getproperty -url http://SharePoint-web-App-URL -pn alerts-enabled
This should return <Property Exist="Yes" Value="yes" />
If you don’t get this, Enable alerts by:
stsadm.exe -o setproperty -pn alerts-enabled -pv "true" -url http://SharePoint-web-App-URL
If its already enabled, try turn off and turn on it back.
4) Check the Timer job and Properties
Go to
MOSS 2007: Central Administration > Operations > Timer Job Definitions (under Global Configuration)
In SharePoint 2010: Central Administration > Monitoring > Review Job Definitions
Check whether the "Immediate Alerts" job is enabled for your web application. check these properties:
job-immediate-alerts
job-daily-alerts
job-weekly-alerts
stsadm.exe -o getproperty -url "http://Your-SharePoint-web-App-URL" -pn job-immediate-alerts
The expected output is:
<Property Exist="Yes" Value="every 5 minutes between 0 and 59"/>.
If you don’t get this, run the following command to set its value.
stsadm.exe -o setproperty -pn job-immediate-alerts -pv “every 5 minutes between 0 and 59" -url http://Your-SharePoint-web-App-URL
5) Check whether the account is subscribed for alerts and it has a valid email account. This should be the first thing to check if the problem persists for some users not for all.
6) Then check if at all those users have at least read permission for the list. Because the first mail should go out for every user without security validation but the next ones won't be delivered unless the user has at least read
permission.
7) If it is happening for one user, can also try to delete and re add the user in the site.
8) Most importantly , you should try this one.
Run this SQL query to the content db < Select * from Timerlock>
This will give you the name of the server which is locking the content database and since when.
In order to get rid of that lock
Go to that server which is locking the content db and then restart the windows timer service.
within some time it should release the lock from content db, if not then at the most stop the timer job for some time
Once the lock will be released then try to send some alerts
You will surely get the email alert.
I found this is the most probable reason for alert not working most of the time. We should start troubleshooting with above steps before coming to this step for any alert email issue but from step 1 to step 7 are best for new environments or new servers.
If the issue is like this ,alert was working before and suddenly stopped working without any environmental change then above conditions in step 1-7 should be ideally fine.
Even after this if it is not working, then you can try these few more steps too
9) Try re-registering the alert template:
stsadm -o updatealerttemplates -url http://Your-SharePoint-Web-App-URL -f "c:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\XML\alerttemplates.xml" -LCID 1033
10) Try to clear the configuration cache
If this helped you resolve your issue, please mark it Answered

ASA and RADUIS on Windows server 2012

hi i have ASA5505 i want to get the Authentication from Raduis Server using NPS on windows Server 2012 i test the Raduis Server over "Kerio Control VMware Virtual Appliance" its work Perfect for testing my Setting on Raduis but with the ASA5505 i get this message "Error authentication rejected aaa failure"
Running Config
: Saved
ASA Version 9.1(3)
hostname NazcoFW
domain-name default.domain.invalid
enable password XgEKS9WizHnI9IUJ encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd XgEKS9WizHnI9IUJ encrypted
names
interface Ethernet0/0
switchport access vlan 22
interface Ethernet0/1
interface Ethernet0/2
switchport access vlan 12
interface Ethernet0/3
interface Ethernet0/4
shutdown
interface Ethernet0/5
shutdown
interface Ethernet0/6
shutdown
interface Ethernet0/7
switchport access vlan 32
shutdown
interface Vlan1
nameif NAZCO
security-level 100
ddns update hostname OSI
dhcp client update dns server both
ip address 172.16.200.1 255.255.255.0
interface Vlan12
nameif outside4
security-level 0
ip address 172.16.4.254 255.255.255.0
interface Vlan22
nameif Outside20
security-level 0
ip address 172.16.20.254 255.255.255.0
boot system disk0:/asa913-k8.bin
ftp mode passive
dns domain-lookup NAZCO
dns server-group DefaultDNS
name-server 10.1.1.1
name-server 10.1.2.1
domain-name default.domain.invalid
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network HP5220
host 10.10.10.105
object network ak20
host 10.10.10.110
object network hp5520
host 192.168.2.105
object network HP7000
host 192.168.2.106
object network HP5520
host 192.168.2.105
object network ak04
host 10.10.10.110
object network HP400
host 192.168.2.107
object network out04
range 192.168.2.200 192.168.2.220
object network AK04
host 10.10.10.110
object network oooo
subnet 10.10.10.0 255.255.255.0
object network 444
host 10.10.10.110
object network OSITOINT
subnet 10.10.10.0 255.255.255.0
object-group network OSItoOUT04
network-object object out04
access-list outside20_access_in extended permit icmp any4 any4
pager lines 24
logging enable
logging asdm-buffer-size 512
logging trap informational
logging asdm informational
logging host NAZCO 10.10.10.10 17/6161
logging debug-trace
logging permit-hostdown
mtu NAZCO 1500
mtu Outside20 1500
mtu outside4 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-721.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (NAZCO,outside4) source dynamic any interface dns
nat (NAZCO,Outside20) source dynamic any interface dns
route Outside20 0.0.0.0 0.0.0.0 172.16.20.1 1
route outside4 0.0.0.0 0.0.0.0 172.16.4.1 11
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server Keefa-Raduis protocol radius
aaa-server Keefa-Raduis (NAZCO) host 172.16.200.10
key *****
radius-common-pw *****
user-identity default-domain LOCAL
aaa authentication enable console LOCAL
aaa authentication http console LOCAL
aaa authentication serial console LOCAL
aaa authentication ssh console LOCAL
aaa authentication telnet console LOCAL
http server enable
http 0.0.0.0 0.0.0.0 NAZCO
snmp-server host NAZCO 10.10.10.196 community ***** version 2c
no snmp-server location
no snmp-server contact
snmp-server community *****
snmp-server enable traps snmp authentication linkup linkdown
snmp-server enable traps syslog
snmp-server enable traps ipsec start stop
snmp-server enable traps entity fru-insert
snmp-server enable traps remote-access session-threshold-exceeded
snmp-server enable traps connection-limit-reached
snmp-server enable traps cpu threshold rising
snmp-server enable traps ikev2 start stop
snmp-server enable traps nat packet-discard
crypto ipsec security-association pmtu-aging infinite
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto ca trustpool policy
crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
308205ec 308204d4 a0030201 0202106e cc7aa5a7 032009b8 cebcf4e9 52d49130
0d06092a 864886f7 0d010105 05003081 ca310b30 09060355 04061302 55533117
30150603 55040a13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b
13165665 72695369 676e2054 72757374 204e6574 776f726b 313a3038 06035504
0b133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72
20617574 686f7269 7a656420 75736520 6f6e6c79 31453043 06035504 03133c56
65726953 69676e20 436c6173 73203320 5075626c 69632050 72696d61 72792043
65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31
30303230 38303030 3030305a 170d3230 30323037 32333539 35395a30 81b5310b
30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20
496e632e 311f301d 06035504 0b131656 65726953 69676e20 54727573 74204e65
74776f72 6b313b30 39060355 040b1332 5465726d 73206f66 20757365 20617420
68747470 733a2f2f 7777772e 76657269 7369676e 2e636f6d 2f727061 20286329
3130312f 302d0603 55040313 26566572 69536967 6e20436c 61737320 33205365
63757265 20536572 76657220 4341202d 20473330 82012230 0d06092a 864886f7
0d010101 05000382 010f0030 82010a02 82010100 b187841f c20c45f5 bcab2597
a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10
9c688b2e 957b899b 13cae234 34c1f35b f3497b62 83488174 d188786c 0253f9bc
7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b
15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845
63cd1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8
18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced
4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f
81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 02030100 01a38201 df308201
db303406 082b0601 05050701 01042830 26302406 082b0601 05050730 01861868
7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1d130101
ff040830 060101ff 02010030 70060355 1d200469 30673065 060b6086 480186f8
45010717 03305630 2806082b 06010505 07020116 1c687474 70733a2f 2f777777
2e766572 69736967 6e2e636f 6d2f6370 73302a06 082b0601 05050702 02301e1a
1c687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406
03551d1f 042d302b 3029a027 a0258623 68747470 3a2f2f63 726c2e76 65726973
69676e2e 636f6d2f 70636133 2d67352e 63726c30 0e060355 1d0f0101 ff040403
02010630 6d06082b 06010505 07010c04 61305fa1 5da05b30 59305730 55160969
6d616765 2f676966 3021301f 30070605 2b0e0302 1a04148f e5d31a86 ac8d8e6b
c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973
69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30
1b311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301d0603
551d0e04 1604140d 445c1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355
1d230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300d0609
2a864886 f70d0101 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80
4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e
b2227055 d9203340 3307c265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a
6decd018 7d494aca 99c71928 a2bed877 24f78526 866d8705 404167d1 273aeddc
481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16
b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0
5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8
6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28
6c2527b9 deb78458 c61f381e a4c4cb66
quit
telnet timeout 5
ssh scopy enable
ssh 172.16.200.0 255.255.255.0 NAZCO
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
management-access NAZCO
dhcp-client update dns server both
dhcpd dns
dhcpd update dns both
dhcpd address 172.16.200.20-172.16.200.89 NAZCO
dhcpd dns 172.16.20.1 172.16.4.1 interface NAZCO
dhcpd lease 1048575 interface NAZCO
dhcpd update dns both interface NAZCO
dhcpd enable NAZCO
threat-detection basic-threat
threat-detection statistics
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
ssl encryption rc4-sha1 aes128-sha1 aes256-sha1 3des-sha1
username admin password bZmVDHuxUzzxS3yz encrypted privilege 15
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
inspect icmp error
class class-default
user-statistics accounting
service-policy global_policy global
prompt hostname context
service call-home
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
hpm topN enable
Cryptochecksum:357b7c6f861e8aa9bb3a3674a789b39b
: end
asdm image disk0:/asdm-721.bin
no asdm history enable

Hi
Looks like the AAA configuration is set for local
aaa authentication enable console LOCAL
aaa authentication http console LOCAL
aaa authentication serial console LOCAL
aaa authentication ssh console LOCAL
aaa authentication telnet console LOCAL
Change it to Radius
aaa-server Keefa-Raduis protocol radius
aaa-server Keefa-Raduis (NAZCO) host 172.16.200.10
key *****
radius-common-pw *****
for example :
aaa authentication telnet console Keefa-Raduis LOCAL
Now when you will do telnet to using Radius credentials, Its Should work, If radius goes down you can use LOCAL username and password as fallback method.
Cheers!
Minakshi(Do rate the helpful post)

Failed to install windows server 2012 in virtual machine hosted in window 8.1

I installed Hyper-V in windows 8.1, then when I tried to install windows server 2012 R2 or windows server 2008 R2 in virtual machine, I got the following error:
the following is my virtual machine setting:
is there anyone an help to resolve it? thank you very much.

Hi,
Good to hear that you have solved this issue. Thanks for sharing as it would be helpful to anyone who encounters similar issues.
Best regards,
Susie

How to install Windows Server 2012 as a Virtual Machine on Window 7 64 bit machine

Hi All,
I need to install virtual Window Server 2012 on Window 7 machine(8gb ram,64 bit machine).
Please give me the list of required softwares to install. If possible the please give download link as well.
Thanks
mit

Since you're on Windows 7 I'd probably go for using VirtualBox
https://www.virtualbox.org/ to host the virtual machine.
Downloading 2012 depends what you're after really, if you've got TechNet / MSDN then you can download it from there, otherwise you'd need to have a licenced copy. You can download 180 day evaluation versions from the Microsoft website here :
2012 - http://technet.microsoft.com/en-gb/evalcenter/hh670538.aspx
2012 R2 -
http://technet.microsoft.com/en-gb/evalcenter/dn205286.aspx

Error in Installing Exchange Server 2013 (w SP1) Mailbox Role on Windows Server 2012 R2

Hi Team,
Need urgent help in resolution of following error:
Environment Details: VMware ESXi 5.5 (vMotion)
Migration from Exchange Server 2007 (SP3 + RU13) to Exchange Server 2013
Exchange Server: Exchange Server 2013 with SP1 (Latest Installation Media)
OS: Windows Server 2012 R2 - Standard (Latest Installation Media)
Exchange 2013 Roles: Seprated (Mailbox and CAS on Different VMs)
Prerequisites: Installed
Error: Installation gives Error at Step 10 during installation of Mailbox Service
Error Details Below:
Error:
The following error was generated when "$error.Clear();
if ([Environment]::OSVersion.Version.Major -ge 6)
$WsbBinPath=$RoleInstallPath+"bin\wsbexchange.exe";
$reg= join-path (join-path $env:SystemRoot system32) reg.exe;
$servicecmd = join-path (join-path $env:SystemRoot system32) sc.exe;
if ((get-service wsbexchange* | where {$_.name -eq "wsbexchange"}))
if ((get-service wsbexchange).Status -eq "Running")
Start-SetupProcess -Name:"$servicecmd" -Args:"stop wsbexchange";
Start-SetupProcess -Name:"$servicecmd" -Args:"delete wsbexchange";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`" /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`" /t REG_SZ /d `"$WsbBinPath`" /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`" /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LocalService /t REG_SZ /d `"wsbexchange`" /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LaunchPermission /t REG_BINARY /d `"010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`"
/f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\wsbexchange.exe`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v `"Application Identifier`" /t REG_SZ /d
Exchange /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v CLSID /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`"
/f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMountOnPITRecovery /t REG_DWORD /d 1 /f";
Start-SetupProcess -Name:"$servicecmd" -Args:"create wsbexchange binpath= `"$WsbBinPath`" type= own start= demand error= ignore obj= LocalSystem DisplayName= `"Microsoft Exchange Server Extension for Windows Server Backup`"";
Start-SetupProcess -Name:"$servicecmd" -Args:"description wsbexchange `"Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`"";
" was run: "Process execution failed with exit code 1.".

Resolved ! :)
Root Cause: The user account I was using had all the required privileges for Exchange Installation but was not having access to edit the registry of the server. Enable access to registry edit tools and you are good to go.
As an alternate you can also try installing using Domain Administrator account if in case there is an IT Policy constraint in the former method.
Thanks to all.

WIndows Server 2012 - Server Manager Error CLR20r3

WIndows Server 2012 - Server Manager Error CLR20r3
I have just experienced this error of ( CLR20r3) when trying to add or remove server roles.
Server Manager crashes when trying to go into the Add/ Or Remove server roles
What I have tried.
.NET Diag
.NET Fix
Lots of research, and didn't find any resolution.
Apparently this is not strictly tied to Windows Server 2012, as I see that Windows Server 2008 R2 , and even Windows desktop users have experienced this issue. With no direct resolution.
Here is a screen shot for reference.......
If anyone should obtain the MS Fix or hear of it, please post so that others who are experiencing this issue can find peace in their day.
I have given up, ended up performing a reinstall. ( sadly)
RF

Hi RF,
Based on your description, would you please refer to following operations and troubleshoot this issue?
Please use
Sytem File Checker tool to scan all protected system files.
Please
perform a clean boot to check if some third-party services affected.
Please backup the registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Ole. Then delete following two registry key (if exist): LeagcyImepersonationLevel and LegacyauthenticationLevel
Then log off and logon and monitor the result.
In addition, please navigate to %windir%\logs and check ServerManager and CBS log file if you can find some
relevant errors.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Server Manager Error, Windows Server 2012 Standed

Windows
Server 2012 on my desktop
and I've been in it then
open Server Manager "ServerManager.exe - This application could not be started"
error this time. In it,
the option is YES and
NO. YES is open
to the side of .net.
Please help me as soon as possible.

Hi,
Please check the event viewer to get more detailed error information about this issue.
You can also remotely access it from another server by adding this server in the server manager of the remote server, and try to access the roles and features from the remote server, and tackle the problem from there.
I hope this helps.

Cannot publish Flash Updates Verification of file signature failed for file SCUP 2011, SCCM 2012 R2 and WSUS all on same Windows Server 2012 machine

I am attempting to distribute Adobe Flash updates using SCUP 2011, SCCM 2012 R2, WSUS ver4 and Windows Server 2012. Everything installs without error. I have acquired a certificate for SCUP signing from the internal Enterprise CA. I have
verified the signing certificate has a 1024 bit key. I have imported the certificate into the server's Trusted Publishers and Trusted Root CA stores for the computer. When I attempt to publish a Flash update with Full content I receive the following
error:
2015-02-13 23:00:48.724 UTC Error Scup2011.21 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
\\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab
I have redone the certificates three times with no luck. I can import metadata, but any attempt to download content results in the verification error.
TIA

Hi Joyce,
This is embarrassing, I used that very post as my guide when deploying my certificate templates, but failed to change the bit length to 2048. Thank you for being my second set of eyes.
I changed my certificate key bit length to 2048, deleted the old cert from all certificate stores, acquired the a new signing cert, verified the key length was 2048, exported the new cert to pfx and cer files, imported into my Trusted publishers
and Trusted Root Authorities stores, reconfigured SCUP to use the new pfx file, rebooted the server and attempted to re-publish the updates with the following results:
2015-02-16 13:35:44.006 UTC Error Scup2011.4 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
\\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab.
Is there a chance this content was already created and signed with the old cert, so installing the new cert has no effect? In ConfigMgr software updates I see 4 Flash updates, all marked Metadata Only (because they were originally published as "Automatic."
No Flash updates in the ConfigMgr console are marked as downloaded. I can't find any documentation on how the process of using SCUP for downloading content for an update marked Metadata Only actually works.
Comments and suggestions welcome.

Windows Server 2012 R2 print issues

We are using terminal server with Windows Server 2012 R2. Our users are using Windows 7 Embedded thin clients with MSTSC RDP 8.0. We are using network printers.
There is problem with printing from Adobe Reader. We are using Adobe Reader 11.0.06. Sometimes users cannot print from Adobe Reader with error message "Printer not found" even though we can print on same printer from other software. This problem can be solved by relogging user, but in our enterprise environment, this is not acceptable solution.
Thanks for your help.

I had the same issue with another Canon UFRII that was not on the network. Canon has some monitor software that attempts to query the device and this threw back Invalid Parameter when the device did not exist. Is your device on the network?
Failed for get value IrregularPaper for printer . Error code 87(ERROR_INVALID_PARAMETER)
     InternalGetPrinterDataFromPort
3328
4984       0
0
LOCALSPL_TRACE
Failed for get value udpEnable for printer . Error code 87(ERROR_INVALID_PARAMETER)
Can you use one of the UFR drivers Canon included with the operating system?
Canon UFR II Color Class Driver
Canon UFR II B/W Class Driver
Alan Morris Windows Printing Team

Windows Server 2012 R2 KMS - STATUS_SUCCESS

Similar Messages

Maybe you are looking for