WIndows Server 2012 - Server Manager Error CLR20r3

WIndows Server 2012 - Server Manager Error CLR20r3
I have just experienced this error of ( CLR20r3) when trying to add or remove server roles.
Server Manager crashes when trying to go into the Add/ Or Remove server roles
What I have tried.
.NET Diag
.NET Fix
Lots of research, and didn't find any resolution.
Apparently this is not strictly tied to Windows Server 2012, as I see that Windows Server 2008 R2 , and even Windows desktop users have experienced this issue. With no direct resolution.
Here is a screen shot for reference.......
If anyone should obtain the MS Fix or hear of it, please post so that others who are experiencing this issue can find peace in their day.
I have given up, ended up performing a reinstall. ( sadly)
RF

Hi RF,
Based on your description, would you please refer to following operations and troubleshoot this issue?
Please use
Sytem File Checker tool to scan all protected system files.
Please
perform a clean boot to check if some third-party services affected.
Please backup the registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Ole. Then delete following two registry key (if exist): LeagcyImepersonationLevel and LegacyauthenticationLevel
Then log off and logon and monitor the result.
In addition, please navigate to %windir%\logs and check ServerManager and CBS log file if you can find some
relevant errors.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Similar Messages

Setup closed with exit code: 0x84C40013 - Silent Install error - SQL Server 2012 express management studio SP1

I am trying to create a silent installation package for SQL Server 2012 Express Management Studio SP1. (both x86 & x64)
Prior to installation I have performed the following :
1. Turned ON the Windows feature 'Microsoft .NET Framework 3.5.1' (I had read somewhere on the internet that this is required prior to installation)
2. Installed Microsoft .NET Framework 4.0
I am using the following command line to perform an unattended install :
<EXENAME> /Q /IACCEPTSQLSERVERLICENSETERMS /ACTION=install /FEATURES=Tools
However, the installation fails abruptly.
The application installs successfully with the following command line :
<EXENAME> /IACCEPTSQLSERVERLICENSETERMS /ACTION=install /FEATURES=Tools
The error occurs only while attempting to install the application with the /Q switch appended.
Please help.

Hello Fanny,
Thanks for providing the link to the SQL Server 2012 unattended install guide.
However, I must highlight that I was running the setup.exe with "Run As a Administrator" option and still facing the issue.
Anyways, I found out the root cause and I must say that it was a rather silly one.
As I had stated previously, the following command line was causing the issue :
<EXENAME>
/Q /IACCEPTSQLSERVERLICENSETERMS /ACTION=install /FEATURES=Tools
I simply changed it to the following and it worked....
<EXENAME>
/QUIET /IACCEPTSQLSERVERLICENSETERMS /ACTION=INSTALL /FEATURES=TOOLS
It so seems that everything must be in CAPITALS for this to work.
Regards,
Soumen

[Forum FAQ]How to upgrade Windows Server 2008 R2 with a GUI to Windows Server 2012 Server Core

We found that some customers willing to upgrade Windows Server 2008 R2 GUI to Windows Server 2012 Server Core recently. This article provides detailed steps to perform the upgrade.
Analysis
Upgrading from Windows Server 2008 R2 with a GUI installation to Windows Server 2012 with Server Core directly
is not supported. If you do that, you will receive the error message below(Figure 1) in Compatibility report:
Figure 1.
In these scenario, you can upgrade to Windows Server 2012 firstly. After the upgrade process is completed, you can switch freely between Server Core and Server with a GUI modes.
Produces
You can follow the steps below to perform an upgrade from Windows Server 2008 R2 with a GUI installation to Windows Server 2012 Server Core mode:
1. Upgrade to Windows Server 2012 with a GUI mode
1) Firstly, please boot into Windows Server 2008 R2 with a Windows Server 2012 installation DVD inserted.
2) Select the operating system you want to install with a GUI mode.
We can see 2 options (Server Core Installation or Server with a GUI) for each operating system version. (Figure 2)
Figure 2.
Note: Please make sure you have enough disk space on system partition. Or you will get such an error in Compatibility report.(Figure 3)
Figure 3.
After the Compatibility check, the installation will continue. It will take several minutes until upgrading is done.(Figure 4)
Figure 4.
2. Switch the GUI mode to Server Core
Method 1: Using Server Manager
1) Open Server Manager, click
Manger and select “Remove Roles and Features” to start the
Remove Roles and Features Wizard.
2) In Features,
uncheck the box next to the “User Interfaces and Infrastructure” option, and then click “Next”. (Figure 5)
Figure 5.
Now tick the “Restart the destination Server automatically if required” box, then click “Remove”. (Figure 6)
Figure 6.
Method 2: Using Windows PowerShell
There are multiple ways to remove the GUI via Windows PowerShell, we introduce the way of using the ServerManager module.
You can also run the commands in Windows PowerShell with an administrator to remove the GUI feature:
“Import-Module ServerManager”
“Uninstall-Windowsfeature Server-Gui-Shell –Restart”
or
“Uninstall-WindowsFeature Server-Gui-Shell, Server-Gui-Mgmt-Infra –Restart”
It will take a period of time to remove the GUI feature and reboot. When the system boots up, you will get into the Windows Server 2012 with Server Core mode. (Figure 7)
Figure 7.
More information:
Switch between Full and Server Core in Windows Server 2012 using PowerShell 3.0
http://blogs.technet.com/b/puneetvig/archive/2012/10/16/switch-between-full-and-core-in-windows-server-2012-using-powershell-3-0.aspx
Windows Server Installation and Upgrade
http://technet.microsoft.com/en-us/windowsserver/dn527667.aspx
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hi,
Brian is right, for mange the Server 2008r2 sp1 we recommend use the Windows 7 or 7.1 platform.
More information:
Remote Server Administration Tools for Windows 7 with Service Pack 1 (SP1)
http://www.microsoft.com/en-us/download/details.aspx?id=7887
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Will the reports developed in sql server 2008 r2 BIDS work when deployed on sql server 2012 reporting manager

Will the reports developed in sql server 2008 r2 BIDS work when deployed on sql server 2012 reporting manager?
when I check on Microsoft site it says
Reports are not upgraded when you upload a report definition file directly to the report server
or SharePoint site. Upgrading a report definition in SQL Server Data Tools is the only way to upgrade the .rdl file.
When you open an .rdl file in Report Designer in SQL Server Data Tools (SSDT), if the report was
created for a previous namespace, Report Designer automatically creates a backup file and upgrades the report to the current namespace.
This is the only way you can upgrade a report definition file.
Now here is another confusing statement which says
You can upload an .rdl file created in an earlier version of Reporting Services to a SQL Server
2012 report server and it is automatically upgraded on first use. The report server stores the report definition file in the original format. The report is automatically upgraded the first time it is viewed, but the stored report definition file remains
unchanged.
All I want to know is if I deploy a rdl made in 2008 r2 to 2012 will it work on the report manager of
2012?
<o:p>
</o:p>
Mudassar

I have tested this fucntionality and can confirm that ssrs 2008 r2 reports work when you deploy them on new ssrs 2012 report manager .
No Migration is required .
I didnt even moved report server dbs .All I did is just deployed reports on the report manager and it worked .
"You
can upload an .rdl file created in an earlier version of Reporting Services to a SQL Server 2012 report server and it is automatically upgraded on first use. "
Microsoft needs to correct this the documentation is misleading
Mudassar

What are share point server 2013 & Share point Designer 2013 & Office 365 & Yammer & Share point 2013 & Windows server 2008 server & Windows Server 2012 Server Data Center?

I need some clarifications.
What are share point server 2013 & Share point Designer 2013 & Office 365 & Yammer & Share point 2013 & Windows server 2008 server & Windows Server 2012 Server Data Center? How each them are related in collaboration system?
Is Share point server 2013 and Share pointer Designer 2013 available in 32bit version? If not, then how to use it in 32 bit machine by using any VMs?
Thanks
Senthil

SharePoint Server 2013:
http://office.microsoft.com/en-us/microsoft-sharepoint-collaboration-software-FX103479517.aspx
SharePoint Designer 2013:
Designer is used to develop SharePoint pages using HTML/CSS/JS as well as SharePoint Designer Workflows
Yammer:
https://about.yammer.com/
Windows Server is Windows, but the Server OS. SharePoint runs on top of supported Windows Servers editions (see http://technet.microsoft.com/en-us/library/cc262485.aspx).
SharePoint Server is 64-bit only (trial:
http://technet.microsoft.com/en-us/evalcenter/hh973397.aspx), although Designer does have a 32-bit edition (full product:
http://www.microsoft.com/en-us/download/details.aspx?id=35491).
You will need the capability to run 64bit VMs. Minimum recommended all-in-one VM for SharePoint is to allocate 24GB of RAM, but you can get away with as little as 12GB (I wouldn't go below that). Because of this, it generally rules out 32bit OSes as a virtual
machine host.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Can't find SQL Server 2012 Configuration Manager

In my Win8 I can't find SQL Server Configuration Manager.
I need to connect to an SQL Database using a specific port.
Does anyone know how to do that?
Thanks a lot!!

Hi Lina,
Did you install multiple SQL Server instances on your local server? We can not configure SQL Server 2012 instance under SQL Server 2008 R2 Configuration Manager.
If you had installed SQL Server Configuration Manager with SQL Server 2012, you can try to run "sqlservermanager11.msc". If this is not opening then you might not install SQL Server 2012 Configuration Manager.
Regards,
Fanny Liu
If you have any feedback on our support, please click
here.
Fanny Liu
TechNet Community Support

Cannot Reassign Virtual Desktop in Windows Server 2012 Personal Managed VDI Collection

I have a Personal Virtual Desktop Collection on my Windows 2012 server with 3 desktops created.
For testing purposes, I assigned the 3 desktops to admin users and everything was working well. I need to re-assign two of the three desktops to the actual end-users now that they are setup the way I want, and tested. I go through Server Manager - Remote
Desktop Services - Collections - Virtual Desktop and select the virtual desktops, then select Assign and enter the new AD User. It does not error, and now shows the right user assigned.
But, when I try to remote desktop for these two users, it logs into the actual Windows 2012 server, and not the virtual guest on that server.
I've rebooted the server and guests a few times, and cannot seem to get this working for these two users.
Any ideas?
Tom Drought

Here is the whole sequence of events for a "normal" connection, do you see these?
Log Name:      Microsoft-Windows-TerminalServices-SessionBroker/Operational
Source:        Microsoft-Windows-TerminalServices-SessionBroker
Date:          5/14/2013 2:45:10 PM
Event ID:      800
Task Category: RD Connection Broker processes connection request
Level:         Verbose
Keywords:
User:          NETWORK SERVICE
Computer:      rdvh.corp.contoso.com
Description:
RD Connection Broker received connection request for user CORP\user1.
Hints in the RDP file (TSV URL) = tsv://VMResource.1.VDI-BB
Initial Application = NULL
Call came from Redirector Server = rdvh.corp.contoso.com
Redirector is configured as Virtual machine redirector
Log Name:      Microsoft-Windows-TerminalServices-SessionBroker/Operational
Source:        Microsoft-Windows-TerminalServices-SessionBroker
Date:          5/14/2013 2:45:11 PM
Event ID:      801
Task Category: RD Connection Broker processes connection request
Level:         Verbose
Keywords:
User:          NETWORK SERVICE
Computer:      rdvh.corp.contoso.com
Description:
RD Connection Broker successfully processed the connection request for user CORP\user1. Redirection info:
Target Name = VDI-BB-1
Target IP Address = 192.168.1.108
Target Netbios = VDI-BB-1
Target FQDN = VDI-BB-1.corp.contoso.com
Disconnected Session Found = 0x0
Log Name:      Microsoft-Windows-TerminalServices-SessionBroker/Operational
Source:        Microsoft-Windows-TerminalServices-SessionBroker
Date:          5/14/2013 2:45:15 PM
Event ID:      787
Task Category: RD Connection Broker manages resource (target/session) related information
Level:         Verbose
Keywords:
User:          NETWORK SERVICE
Computer:      rdvh.corp.contoso.com
Description:
Session for user CORP\user1 successfully added to RD Connection Broker's database.
Target Name = VDI-BB-1
Session ID = 2
Farm Name = VDI-BB
Don Geddes - SR Support Escalation Engineer - Remote Desktop Services - Printing and Imaging

Windows server 2012 essential installation error

hi all
I am attempting to install Windows Server 2012 Essentials which will be used as a domain controller. So at the point in the installation when asked about fresh install I select that option. I answer:
Date, Time, TZ etc
Company name
Domain name RPA
Computer Name
Administrator Account username
Administrator account user password: 13 characters, mixture of upper, lower case, numbers and special characters. Confirm
Standard user username
Standard user password: 13 characters, mixture of upper, lower case, numbers and special characters. Confirm
The install continues, reboots , then it continues to the installation screen
Progress bar continues to move across the screen.
When the progress bar gets to approximately 34%, it remains there for quite some time, then I get the screen that states:
"AN ERROR HAS OCCURRED WHILE SETTING UP YOUR SERVER.
IF YOU PURCHASED YOUR SERVER FROM A HARDWARE MANUFACTURER, CONTACT THE MANUFACTURER FOR SUPPORT
TO SAVE THE ERROR LOGS, IT IS RECOMMENDED THAT YOU SELECT A FOLDER ON A REMOVABLE MEDIA SUCH AS A USB FLASH DRIVE SO THAT YOU CAN ACCESS YOUR FILES FROM ANOTHER COMPUTER."

had this error before too. What server hardware you got? Where did your Server Installation media come from, MSDN, Retail store? Are you installing on a RAID? if so, what configuration and what is the status of the drives... are they new? the same?
Check out this troubleshooting guide... it should help you identify the area where you do not meet the requirement.
and here is the installation guide which points out some precautions you should note prior to installation.
Mike Scotto

Problem installing SQL Server 2012 SP1: "managed sql server installer has stopped working"

Hello,
I have a big problem.
I just downloaded SQL Server 2012 SP1 and I only want to install SSMS. The installer always crashes with an error message "managed sql server installer has stopped working".
I already tried all solutions from Google for this problem but nothing works.
Can someone help me plase?
My System: Window 8 Pro with Visual Studio 2012.
Thanks
Sven

Would you please uplaod/share SQL Server setup logs
C:\Program
Files\Microsoft
SQL Server\110\Setup
Bootstrap\Log\20130125_133342
to file sharing service like SkyDrive.com
FAQ
Regards,
Ahmed Ibrahim
SQL Server Setup Team
My Blog
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and "Vote as Helpful"
on posts that help you.
This can be beneficial to other community members reading the thread.

Microsoft OLE DB Provider for SQL Server 2012 Analysis Services Error Code = 0x80040E05

I've been running a package for 6 months without any issues that pulls data from a cube via MDX and moves it to a database.
We've recently moved to a new server x64 and the connections all succeed but at runtime (in 64 = T&F) I get the following error:
[SRC AdExchange [87]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E05.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server 2012 Analysis Services." Hresult: 0x00000001 Description: "Error Code = 0x80040E05, External Code = 0x00000000:.".
[SSIS.Pipeline] Error: SRC AdExchange failed the pre-execute phase and returned error code 0xC0202009.
I've installed SQL_AS_OLEDB, SQL_AS_ADOMD from Microsoft® SQL Server® 2012 SP1 Feature Pack
Why is my connection failing?

The server has a 10Gbps network connection.
I've installed CU6 for SQL Server 2012 SP1
http://support.microsoft.com/kb/2874879/en-us#hfi
I'm still getting the same error at runtime in BIDS:
[SRC AdExchange [87]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E05.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server 2012 Analysis Services." Hresult: 0x00000001 Description: "Error Code = 0x80040E05, External Code = 0x00000000:.".
[SSIS.Pipeline] Error: SRC AdExchange failed the pre-execute phase and returned error code 0xC0202009.
Looking at the errorlog, everything looks normal until:
Launched startup procedure 'sp_ssis_startup'.
Attempting to load library 'xpsqlbot.dll' into memory. This is an informational message only. No user action is required.
Using 'xpsqlbot.dll' version '2011.110.2100' to execute extended stored procedure 'xp_qv'. This is an informational message only; no user action is required.
Attempting to load library 'xpstar.dll' into memory. This is an informational message only. No user action is required.
Using 'xpstar.dll' version '2011.110.3000' to execute extended stored procedure 'xp_instance_regread'. This is an informational message only; no user action is required.
Attempting to load library 'xplog70.dll' into memory. This is an informational message only. No user action is required.
Using 'xplog70.dll' version '2011.110.2100' to execute extended stored procedure 'xp_msver'. This is an informational message only; no user action is required.
AppDomain 2 (SSISDB.dbo[runtime].1) created.
Unsafe assembly 'microsoft.sqlserver.integrationservices.server, version=11.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil' loaded into appdomain 2 (SSISDB.dbo[runtime].1).
Unsafe assembly 'microsoft.sqlserver.integrationservices.server, version=11.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil' loaded into appdomain 2 (SSISDB.dbo[runtime].1).
AppDomain 3 (master.sys[runtime].2) created.
Software Usage Metrics is enabled.
SQL Server is terminating because of a system shutdown. This is an informational message only. No user action is required.
Service Broker manager has shut down.
Error: 17054, Severity: 16, State: 1.
The current event was not reported to the Windows Events log. Operating system error = (null). You may need to clear the Windows Events log if it is full.
.NET Framework runtime has been stopped.
SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
The SQL Server Network Interface library could not deregister the Service Principal Name (SPN) [ MSSQLSvc/XXXXXXXXXX.com ] for the SQL Server service. Error: 0xffffffff, state: 63. Administrator should deregister this SPN manually to avoid client authentication
errors.
The SQL Server Network Interface library could not deregister the Service Principal Name (SPN) [ MSSQLSvc/XXXXXXXXXX.com:1433 ] for the SQL Server service. Error: 0xffffffff, state: 63. Administrator should deregister this SPN manually to avoid client authentication
errors.
Wondering about the unsafe assembly in SSIS and deregistering the SPN..
Anyone have any ideas on how to resolve this?
Thanks!

SQL Server 2012 installation problem (error server didn't respond in timely fashion ....)

Hi everyone,
I am new to SQL server....I am learning C# programming using visual studio 2013 . And I want to learn SQL database language to create and practice C# database project....My computer meets all the hardware requirement for SQL installation (i.e. My computer
has window 7 OS , 80 GB freen HD and 6 GB RAM. ) Therefore I download Microsoft SQL server express 2012 try to install it in my computer (which already has visual studio).
But during installation of SQL server I have problem ...it says
the server doesn't respond in timely fashion. When I research about it everyone were saying uninstall sql and reinstall again. I uninstall and re install but still having same problem...
The database engine also not installed displaying same error.
I don't know how can i install sql server 2012 to use with visual studio in same computer.
Can somebody please help with SQL installation please ?
It will be great help.
Many thanks in advance
regards
rash

Hi
my summary file is :
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2146232832
Start time: 2015-04-06 11:34:18
End time: 2015-04-06 19:04:46
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for IS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for AS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: RASHA-VAIO
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
SQL Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS Database Engine Services 1033
Express Edition 10.1.2531.0 No
SQL Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS SQL Server Replication 1033
Express Edition 10.1.2531.0 No
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: E:\x64\setup\
Installation edition: Enterprise
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: TABULAR
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: RASHA-VAIO\RASHA
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: MAIN
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150406_112342\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: RASHA-VAIO\RASHA
ENABLERANU: false
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK, MDS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: FilesOnlyMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AS
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: RASHA-VAIO\RASHA
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 1
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150406_112342\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: SQL Server Data Tools
Status: Passed
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x80004005
Error description: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x80004005
Error description: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x80004005
Error description: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x80004005
Error description: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Integration Services
Component error code: 0x84BB0001
Error description: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
Feature: Data Quality Client
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Reporting Services
Component error code: 0x84BB0001
Error description: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
Feature: Analysis Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Analysis Services
Component error code: 0x80131600
Error description: The service could not be started. Reason: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0x88A466B0%400x857354B0&EvtType=0x88A466B0%400x857354B0
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150406_112342\SystemConfigurationCheck_Report.htm
I hope it will help you to figure out ...i dont know how to solve this issue ..i have un install and re install more than 5 times.
thank you

Failure Configuring Windows Updates. Reverting Changes Windows Server 2012 Server 2012

Hello,
Server is activated.
Server has installed 1 year ago.
Windows Update logs:
########### AU: Initializing Automatic Updates ###########
2014-10-15 03:11:32:232
984 1528
AU Additional Service {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782} with Approval type {Pre-install notify} added to AU services list
2014-10-15 03:11:32:232
984 1528
AU AIR Mode is disabled
2014-10-15 03:11:32:232
984 1528
AU # Approval type: Pre-install notify (User preference)
2014-10-15 03:11:32:232
984 1528
AU # Auto-install minor updates: No (User preference)
2014-10-15 03:11:32:232
984 1528
AU # ServiceTypeDefault: Service 117CAB2D-82B1-4B5A-A08C-4D62DBEE7782 Approval type: (Pre-install notify)
2014-10-15 03:11:32:232
984 1528
AU # Will interact with non-admins (Non-admins are elevated (User preference))
2014-10-15 03:11:32:234
984 1528
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 2, GetLastError=2250
2014-10-15 03:11:32:234
984 1528
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 3, GetLastError=2250
2014-10-15 03:11:32:235
984 1528
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 4, GetLastError=2250
2014-10-15 03:11:32:565
984 1528
AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80240037
2014-10-15 03:11:32:569
984 1528
AU AU finished delayed initialization
2014-10-15 03:11:32:599
984 1528
AU Obtained Post reboot hr from Agent:8024000c
2014-10-15 03:11:32:627
984 1528
AU Additional Service {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782} with Approval type {Pre-install notify} added to AU services list
2014-10-15 03:11:32:627
984 1528
AU Triggering Offline detection (non-interactive)
2014-10-15 03:11:32:655
984 196c
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 2, GetLastError=2250
2014-10-15 03:11:32:656
984 196c
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 3, GetLastError=2250
2014-10-15 03:11:32:656
984 196c
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 4, GetLastError=2250
2014-10-15 03:11:32:657
984 196c
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 2, GetLastError=2250
2014-10-15 03:11:32:658
984 196c
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 3, GetLastError=2250
2014-10-15 03:11:32:658
984 196c
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 4, GetLastError=2250
2014-10-15 03:11:32:664
984 196c
WuTask WUTaskHandler successfully started the task.
2014-10-15 03:11:32:664
984 1528
AU #############
2014-10-15 03:11:32:664
984 1528
AU ## START ## AU: Search for updates
2014-10-15 03:11:32:664
984 1528
AU #########
2014-10-15 03:13:32:753
1908 61b4
Misc =========== Logging initialized (build: 7.8.9200.16925, tz: -0000) ===========
2014-10-15 03:13:32:753
1908 61b4
Misc = Process: C:\Windows\system32\wuauclt.exe
2014-10-15 03:13:32:753
1908 61b4
Misc = Module: C:\Windows\SYSTEM32\wucltux.dll
2014-10-15 03:13:32:753
1908 61b4
CltUI AU client got new directive = 'Notify mode, security updates available, safe to show scn detection', return = 0
2014-10-15 03:13:32:755
1908 61b4
AUClnt User ready to accept notifications evaluated as quns:5, ready: Yes.
2014-10-15 03:13:32:780
1908 61b4
CltUI AU client got new directive = 'Notify mode, security updates available scn notification', return = 0
2014-10-15 03:13:32:670
984 1528
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 3, GetLastError=2250
2014-10-15 03:13:32:670
984 1528
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 4, GetLastError=2250
2014-10-15 03:13:32:678
984 1528
AU AU setting pending client directive to 'Notify mode - safe to show scn detection for security updates available notification'
2014-10-15 03:13:32:680
984 1528
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 3, GetLastError=2250
2014-10-15 03:13:32:680
984 1528
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 4, GetLastError=2250
2014-10-15 03:13:32:692
984 1528
AU Launched new AU client for directive 'Notify mode - safe to show scn detection for security updates available notification', session id = 0x2
2014-10-15 03:13:32:755
984 8d4
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 3, GetLastError=2250
2014-10-15 03:13:32:755
984 8d4
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 4, GetLastError=2250
2014-10-15 03:13:32:757
984 8d4
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 3, GetLastError=2250
2014-10-15 03:13:32:757
984 8d4
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 4, GetLastError=2250
2014-10-15 03:13:32:759
984 1528
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 3, GetLastError=2250
2014-10-15 03:13:32:759
984 1528
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 4, GetLastError=2250
2014-10-15 03:13:32:776
984 1528
AU AU setting pending client directive to 'Notify mode - security updates available scn notification'
2014-10-15 03:13:32:777
984 1528
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 3, GetLastError=2250
2014-10-15 03:13:32:777
984 1528
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 4, GetLastError=2250
2014-10-15 03:13:32:778
984 1528
AU Changing existing AU client directive from 'Notify mode - safe to show scn detection for security updates available notification' to 'Notify mode - security updates available scn notification', session id = 0x2
2014-10-15 03:13:32:780
984 8d4
AU WARNING: Pending directive, 'Notify mode - security updates available scn notification', is not applicable
2014-10-15 03:13:34:863
984 1528
AU AU received handle event
2014-10-15 03:13:34:866
984 1528
AU AU setting pending client directive to 'Notify mode - security updates available scn notification'
2014-10-15 03:13:34:866
984 1528
AU WARNING: Pending directive, 'Notify mode - security updates available scn notification', is not applicable
2014-10-15 03:14:13:630
984 1528
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 2, GetLastError=2250
2014-10-15 03:14:13:630
984 1528
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 3, GetLastError=2250
2014-10-15 03:14:13:630
984 1528
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 4, GetLastError=2250
2014-10-15 03:24:14:638
984 1528
AU ########### AU: Uninitializing Automatic Updates ###########
Some workaroud has been made.
sfc /scannow
Start>Run
type cmd and press enter
type net stop wuauserv and press enter
type rename c:\windows\SoftwareDistribution softwaredistribution.oldand press enter
type net start wuauserv and press enter
type exit and press enter
net stop wuauserv
del c:\windows\SoftwareDistribution /q /s
del c:\windows\SoftwareDistribution /q /s
net start wuauserv
C:\Windows\system32> rename c:\windows\SoftwareDistribution softwaredistributio.oldand
C:\Windows\system32>Dism /Online /Cleanup-Image /CheckHealth
Deployment Image Servicing and Management tool
Version: 6.2.9200.16384
Image Version: 6.2.9200.16384
No component store corruption detected.
The operation completed successfully.
C:\Windows\system32>Dism /Online /Cleanup-Image /ScanHealth
Deployment Image Servicing and Management tool
Version: 6.2.9200.16384
Image Version: 6.2.9200.16384
[==========================100.0%==========================]
The component store is repairable.
The operation completed successfully.
C:\Windows\system32>DISM /Online /Cleanup-Image /RestoreHealth

2014-10-19 20:09:17:025
5264 1aa0
Misc =========== Logging initialized (build: 7.8.9200.16925, tz: -0000) ===========
2014-10-19 20:09:17:025
5264 1aa0
Misc = Process: C:\Windows\Explorer.EXE
2014-10-19 20:09:17:025
5264 1aa0
Misc = Module: C:\Windows\system32\wucltux.dll
2014-10-19 20:09:17:025
5264 1aa0
CltUI FATAL: CNetworkCostChangeHandler::RegisterForCostChangeNotifications: CoCreateInstance failed with error 80004002
2014-10-19 20:09:17:025
5264 1aa0
CltUI WARNING: RegisterNetworkCostChangeNotification: Error 80004002
2014-10-19 20:10:40:665
980 8e0
Handler CBS called Error with 0x800f0816,
2014-10-19 20:10:40:665
980 320
Handler Async stage operation completed with 0x800f0816
2014-10-19 20:10:40:821
980 320
Handler Request generation for CBS update complete with hr=0x0 and
2014-10-19 20:10:47:468
980 320
Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\TMP9E38.tmp with dwProvFlags 0x00000080:
2014-10-19 20:10:47:468
980 320
Misc Microsoft signed: NA
2014-10-19 20:10:47:468
980 320
Misc Infrastructure signed: Yes
2014-10-19 20:10:47:468
980 320
EP Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir Client/Server URL: "https://fe2.update.microsoft.com/v6/ClientWebService/client.asmx"
2014-10-19 20:10:47:468
980 320
PT WARNING: Cached cookie has expired or new PID is available
2014-10-19 20:10:47:468
980 320
PT WARNING: PTWarn: Anonymous plug-in skipped for WU
2014-10-19 20:10:47:530
980 320
Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\v6-wuredir.cab with dwProvFlags 0x00000080:
2014-10-19 20:10:47:530
980 320
Misc Microsoft signed: NA
2014-10-19 20:10:47:530
980 320
Misc Infrastructure signed: Yes
2014-10-19 20:10:47:530
980 320
Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\v6-wuredir.cab with dwProvFlags 0x00000080:
2014-10-19 20:10:47:530
980 320
Misc Microsoft signed: NA
2014-10-19 20:10:47:530
980 320
Misc Infrastructure signed: Yes
2014-10-19 20:10:47:530
980 320
Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\TMP9E77.tmp with dwProvFlags 0x00000080:
2014-10-19 20:10:47:530
980 320
Misc Microsoft signed: NA
2014-10-19 20:10:47:530
980 320
Misc Infrastructure signed: Yes
2014-10-19 20:10:47:530
980 320
EP Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir Regulation URL: "https://fe2.update.microsoft.com/v6/UpdateRegulationService/UpdateRegulation.asmx"
2014-10-19 20:10:47:530
980 320
DnldMgr Regulation server path: https://fe2.update.microsoft.com/v6/UpdateRegulationService/UpdateRegulation.asmx.
2014-10-19 20:10:47:686
980 320
DnldMgr * Regulation call complete. 0x00000000
2014-10-19 20:10:47:686
980 320
DnldMgr *********** DnldMgr: New download job [UpdateId = {58E4783D-EE04-4F3B-885F-6799F55A1365}.201] ***********
2014-10-19 20:10:47:686
980 320
DnldMgr * Queueing update for download handler request generation.
2014-10-19 20:10:47:686
980 320
DnldMgr Generating download request for update {58E4783D-EE04-4F3B-885F-6799F55A1365}.201
2014-10-19 20:10:49:652
980 320
Handler Generating request for CBS update 58E4783D-EE04-4F3B-885F-6799F55A1365 in sandbox C:\Windows\SoftwareDistribution\Download\4a74e4e0a072b6d6948e86fd12589a6a
2014-10-19 20:10:49:652
980 320
Handler Selected payload type is ptExpress
2014-10-19 20:10:49:667
980 320
Handler UH: DpxRestoreJob returned 0x80070002
2014-10-19 20:10:49:667
980 320
Handler Detected download state is dsHavePackage
2014-10-19 20:10:50:416
980 8e0
Handler CBS called Error with 0x800f0816,
2014-10-19 20:10:50:416
980 320
Handler Async stage operation completed with 0x800f0816
2014-10-19 20:10:50:463
980 320
Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
2014-10-19 20:10:50:463
980 320
DnldMgr *********** DnldMgr: New download job [UpdateId = {58E4783D-EE04-4F3B-885F-6799F55A1365}.201] ***********
2014-10-19 20:10:50:603
980 320
DnldMgr * All files for update were already downloaded and are valid.
2014-10-19 20:10:50:603
980 1908
AU >>## RESUMED ## AU: Download update [UpdateId = {2695DD3F-2D0A-4409-BF66-C0CE7C05E899}, succeeded]
2014-10-19 20:10:50:603
980 320
DnldMgr *********
2014-10-19 20:10:50:603
980 320
DnldMgr ** END ** DnldMgr: Begin Downloading Updates [CallerId = AutomaticUpdates]
2014-10-19 20:10:50:603
980 320
DnldMgr *************
2014-10-19 20:10:50:603
980 320
DnldMgr *********** DnldMgr: Begin Downloading Updates [CallerId = AutomaticUpdates] ***********
2014-10-19 20:10:50:603
980 320
DnldMgr * Call ID = {DA5D08E9-E9B3-4749-881B-9FF8F1BC4FE2}
2014-10-19 20:10:50:603
980 320
DnldMgr * Priority = 2, NetworkCostPolicy = 6, Interactive = 0, Owner is system = 1, Explicit proxy = 0, Proxy session id = -1, ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}
2014-10-19 20:10:50:603
980 320
DnldMgr * Updates to download = 1
2014-10-19 20:10:50:603
980 320
Agent * Title = Security Update for Windows Server 2012 (KB2973501)
2014-10-19 20:10:50:603
980 320
Agent * UpdateId = {2346EB42-185C-49CC-9856-190C294FE502}.202
2014-10-19 20:10:50:603
980 320
Agent * Bundles 1 updates:
2014-10-19 20:10:50:603
980 320
Agent * {041EDA5D-FF28-450B-AA8C-557161884100}.201
2014-10-19 20:10:50:603
980 320
DnldMgr Adding revision ID 202 for update 2346EB42-185C-49CC-9856-190C294FE502 to the lock revision cache.
2014-10-19 20:10:50:603
980 320
DnldMgr Adding revision ID 201 for update 041EDA5D-FF28-450B-AA8C-557161884100 to the lock revision cache.
2014-10-19 20:10:50:603
980 320
DnldMgr *********** DnldMgr: Regulation Refresh [Svc: {9482F4B4-E343-43B6-B170-9A65BC822C77}] ***********
2014-10-19 20:10:50:603
980 320
DnldMgr Contacting regulation server for 5 updates.
2014-10-19 20:10:50:603
980 320
Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\v6-wuredir.cab with dwProvFlags 0x00000080:
2014-10-19 20:10:50:603
980 320
Misc Microsoft signed: NA
2014-10-19 20:10:50:603
980 320
Misc Infrastructure signed: Yes
2014-10-19 20:10:50:603
980 320
Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\v6-wuredir.cab with dwProvFlags 0x00000080:
2014-10-19 20:10:50:619
980 320
Misc Microsoft signed: NA
2014-10-19 20:10:50:619
980 320
Misc Infrastructure signed: Yes
2014-10-19 20:10:50:619
980 320
Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\TMPAA89.tmp with dwProvFlags 0x00000080:
2014-10-19 20:10:50:619
980 320
Misc Microsoft signed: NA
2014-10-19 20:10:50:619
980 320
Misc Infrastructure signed: Yes
2014-10-19 20:10:50:619
980 320
EP Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir Client/Server URL: "https://fe2.update.microsoft.com/v6/ClientWebService/client.asmx"
2014-10-19 20:10:50:619
980 320
PT WARNING: Cached cookie has expired or new PID is available
2014-10-19 20:10:50:619
980 320
PT WARNING: PTWarn: Anonymous plug-in skipped for WU
2014-10-19 20:10:50:666
980 320
Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\v6-wuredir.cab with dwProvFlags 0x00000080:
2014-10-19 20:10:50:666
980 320
Misc Microsoft signed: NA
2014-10-19 20:10:50:666
980 320
Misc Infrastructure signed: Yes
2014-10-19 20:10:50:666
980 320
Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\v6-wuredir.cab with dwProvFlags 0x00000080:
2014-10-19 20:10:50:681
980 320
Misc Microsoft signed: NA
2014-10-19 20:10:50:681
980 320
Misc Infrastructure signed: Yes
2014-10-19 20:10:50:681
980 320
Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\TMPAAC8.tmp with dwProvFlags 0x00000080:
2014-10-19 20:10:50:681
980 320
Misc Microsoft signed: NA
2014-10-19 20:10:50:681
980 320
Misc Infrastructure signed: Yes
2014-10-19 20:10:50:681
980 320
EP Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir Regulation URL: "https://fe2.update.microsoft.com/v6/UpdateRegulationService/UpdateRegulation.asmx"
2014-10-19 20:10:50:681
980 320
DnldMgr Regulation server path: https://fe2.update.microsoft.com/v6/UpdateRegulationService/UpdateRegulation.asmx.
2014-10-19 20:10:50:837
980 320
DnldMgr * Regulation call complete. 0x00000000
2014-10-19 20:10:50:837
980 320
DnldMgr *********** DnldMgr: New download job [UpdateId = {041EDA5D-FF28-450B-AA8C-557161884100}.201] ***********
2014-10-19 20:10:50:837
980 320
DnldMgr * Queueing update for download handler request generation.
2014-10-19 20:10:50:837
980 320
DnldMgr Generating download request for update {041EDA5D-FF28-450B-AA8C-557161884100}.201
2014-10-19 20:10:56:141
980 320
Handler Generating request for CBS update 041EDA5D-FF28-450B-AA8C-557161884100 in sandbox C:\Windows\SoftwareDistribution\Download\4a3782ca0835c37539a9429b96d709b7
2014-10-19 20:10:56:141
980 320
Handler Selected payload type is ptExpress
2014-10-19 20:10:56:141
980 320
Handler UH: DpxRestoreJob returned 0x80070002
2014-10-19 20:10:56:141
980 320
Handler Detected download state is dsHavePackage
2014-10-19 20:10:58:295
980 8e0
Handler CBS called Error with 0x800f0816,
2014-10-19 20:10:58:295
980 320
Handler Async stage operation completed with 0x800f0816
2014-10-19 20:10:58:498
980 320
Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
2014-10-19 20:10:58:498
980 320
DnldMgr *********** DnldMgr: New download job [UpdateId = {041EDA5D-FF28-450B-AA8C-557161884100}.201] ***********
2014-10-19 20:10:58:591
980 320
DnldMgr * All

Error installing Office 2013 on Server 2012 R2 RDS - Error 25004: the product key you entered cannot be used on this machine

Hi there,
I really hope someone can help me as I am tearing my hair out trying to get this resolved!
I am working on a Server 2012 R2 server with RDS running. Before it was turned into a RDS server it had a copy of Office 2010 running as a trial to see would it work for the accounting package that is running for users via Remote Desktop. Trial worked ok
so it was converted into a RDS server. Now, as its a RDS it needs to run Office under a volume licence, which I have. However when trying to install I get the message: "Error 25004: the product key you entered cannot be used on this machine. this is most
likely due to previous Office 2013 trials being installed on the system."
In summary I have tried everything I can think of and find to remove all traces of the old Office from the machine but still this message persists. I have run the Fix It For Me uninstall from MS and it cannot find any Office installed. i have manually searched
through all of the Windows directories including Program Files and AppData and removed all traces of Office from there, I have searched the registry and removed all I can find from there.
Where or what file does the installer look at to see that a previous version was installed?
I cannot scrub this machine which I would have done long ago because there is another SQL Server based application running on it.
Really really appreciate anyone that can help me on this,
Thanks

Hi,
I have definitely heard your frustration, and I’ll try my best to help you.
Since Office 2010 installed on it before, you need to remove Office 2010 completely.
KB about this error:
http://support2.microsoft.com/kb/2792178
A similar issue is addressed here. Although this method is based on Office 2010, but we can have a try:
http://www.experts-exchange.com/Software/Office_Productivity/Office_Suites/MS_Office/Q_28475448.html
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best regards,
Greta Ge
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

KB2919355 Fails to install on Server 2012 R2 with error 80071A2D

I have several Server 2012 R2 installs that I just cannot get KB2919355 installed on.
I have tried via WSUS and also manually and in all cases, the update takes a while says a reboot is a required then on the restart it rolls back as the update fails.
I have tried running sfc /scannow which reports no issues.
I have also tried running dism /online /cleanup-image /restorehealth which reports corruption was repaired, however in the Windows Setup log it says "System store corruption detection and repair has completed. Status : 0x0, Total instances of corruption
found : 0, total instances of corruption repaired : 0
I take this to mean these components are healthy.
I'd really appreciate a few suggestions here as I'm kind of at a brick wall now. I can't think of anything else to try.
Looking through the Application log, I have a number of Windows Error Reporting entries, most of which don't really say much but one does point to attached files including c:\windows\inf\setupapi.dev.log - the end of this log seemed to suggest that it was
a driver issue :
   inf:      {Configure Driver: exit(0x00000000)}
     inf:      {Configure Driver: Intel(R) 3100 Chipset PCI Express Port A - 35B6}
     inf:           Manufacturer = Intel
     inf:           Section Name = PCI_DRV
     inf:           Hardware Id = PCI\VEN_8086&DEV_35B6
     inf:      {Configure Driver: exit(0x00000000)}
     inf:      {Configure Driver: Intel(R) 3100 Chipset PCI Express Port A1 - 35B7}
     inf:           Manufacturer = Intel
     inf:           Section Name = PCI_DRV
     inf:           Hardware Id = PCI\VEN_8086&DEV_35B7
     inf:      {Configure Driver: exit(0x00000000)}
     inf:      {Configure Driver: Intel(R) 7300 Chipset PCI Express Port 1 - 3604}
     inf:           Manufacturer = Intel
     inf:           Section Name = PCI_DRV
     inf:           Hardware Id = PCI\VEN_8086&DEV_3604
     inf:      {Configure Driver: exit(0x00000000)}
     inf:      {Configure Driver: Intel(R) 7300 Chipset PCI Express Port 2 - 3605}
     inf:           Manufacturer = Intel
     inf:           Section Name = PCI_DRV
     inf:           Hardware Id = PCI\VEN_8086&DEV_3605
!!! inf:           Failed to create driver descriptor key 'PCI\VEN_8086&DEV_3605'. Error = 0x00001A2D
     inf:      {Configure Driver: exit(0x00001a2d)}
!!! sto:      Failed to reflect driver package. Error = 0x00001A2D
     sto: {Reflect Driver Package: exit(0x00001a2d)}
!!! sto: Failed to reflect all driver updates. Error = 0x00001A2D
<<< Section end 2014/05/13 22:24:00.475
<<< [Exit status: FAILURE(0x00001a2d)]
But I'm not really sure how to progress troubleshooting this.
Cheers
James

Hi
Just to confirm, AVG only needed to be "disabled until reboot" to install the KB. It was obviously preventing some file operations that were required during the initial install phase.
Thanks very much to Susan for her help with this.

Setting up Multi server environment in Sql Server 2012 - Enlist Failed Error

I am trying to Configure the Master target server / Multi server environment in Sql Server 2012.
I changed :
- `MSXENCryptChannnelOptions`-->Changed from 2 to 0
- `AllowDownloadedJobsToMatchProxyName` - changed from 0 to 1 on the target
When I run the wizard I am getting below error
>MSX Enlist failed for Job Server 'MasterServerName'
>The enlist operation Failed(Reason:SQL Server Agent Error: Unable to connect to MSX 'MasterServerName'(Microsoft Sql Server, Error : 22026)
They both servers SQL Agents are running on the same windows service account.
Any Suggestions on how to fix this?
**Adding the Log:**
Enlist TSX Progress
- Create MSXOperator (Success)
Checking for an existing MSXOperator.
Updating existing MSXOperator.
Successfully updated MSXOperator.
- Make sure the Agent service for 'Test3' is running (Success)
The service 'SQLSERVERAGENT' is running.
- Ensure the agent startup account for 'Test4' has rights to login as a target server (Success)
Checking to see if the startup account for 'Test4' already exists.
Login exists on server.
Checking to see if login has rights to msdb.
Login has rights to msdb.
Checking to see if user is a member of the TargetServersRole.
User is a member of the TargetServersRole.
- Enlist 'Test4' into 'Test3' (Error)
Enlisting target server 'Test4' with master server 'Test3'.
Using new enlistment method.
Messages
MSX enlist failed for JobServer 'Test4'. (Microsoft.SqlServer.Smo)
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
The enlist operation failed (reason: SQLServerAgent Error: Unable to connect to MSX 'TEST3'.) (Microsoft SQL Server, Error: 22026)

hi SmilingLily,
you can try to run the SQL Agent under a domain account.

WIndows Server 2012 - Server Manager Error CLR20r3

Similar Messages

Maybe you are looking for