Windows Server 2012 Snipping Tool Not Working

I have installed snipping tool on our server. When testing it under the admin account everything works fine.
But when users login and use the snipping tool > Email > Send. The email shows up as blank. It does not show up with the common red X but just shows nothing at all
I have scoured the internet for hours looking for a fix but have yet to find anything. I have changed the registry settings like this link below
http://blogs.msdn.com/b/akashb/archive/2012/12/08/images-sent-using-snipping-tool-snippingtool-exe-shows-up-as-red-x-in-outlook-2010.aspx
I have allowed outlook to accept all pictures etc. I have uninstalled and reinstalled Desktop Features.
What I think is the problem from looking trough my phone is the email says "This message has no content" or "image0001.png" when it should say
cid:[email protected]
If anyone knows a fix for this please let me know. Thanks

I gave everyone full control to snipping tool, still did not work. I logged in as user and ran snipping tool as administrator, still did not work.
The snip is not saved to a certain folder. I am trying to send it via email (without sending it as an attachment) which is the same as copy and pasting the picture.
If I Copy + Paste I get the correct
cid:[email protected],
but if i choose to email only (again not sending as attachment) it has no content at all.
I checked the settings for snipping tool and the box is checked to "always copy snips to the clipboard" which in essence should make it work.

Similar Messages

Why does my Cisco router firewall block Windows Server 2012 traffic, but not Windows Server 2008 traffic?

Hello,
   I run a small business network with five physical servers: three Dell servers running Windows Server 2008 R2, one custom build running 2008, and another custom build running 2012 with Domain Controller Role (same hardware for both custom builds).
The Dell servers are all running the Hyper-V role and each has a number of 2008 VMs. I also have a 2012 VM with the Domain Controller Role on one of the Hyper-V servers and another VM with a completely base install of 2012.
   All servers are plugged into a Cisco SG300-52 switch which is uplinked to a Cisco 881 router which is connected to a cable TWC provided Ubee cable modem. I have no VLANs setup. I do have the Firewall on the router configured
to inspect most traffic.
   Here is my problem: I cannot connect to most of the internet on ANY 2012 server (and all exhibit the exact same behavior), but I have NO problems connecting to the internet from 2008 servers. Here is what I already know:
   1.) I can ping the outside world just fine so ICMP is passing to any external host.
   2.) Two of the 2012 servers are DCs running DNS services and they can connect to the internet just fine for DNS requests because they are doing a perfectly good job of providing DNS services to my network.
   3.) Here's where it gets really weird: I can browse in internet explorer to Bing.com and it works. I can also go to a couple other Microsoft websites (though they are very slow). If I click on any link in Bing, however, it doesn't
work and gives me a page not available error. If I connect to a non-MS website like Google or my company website, I get page not available.
    4.) I have tried to telnet to port 80 at Bing and it works. I have tried to telnet to port 80 at google.com and it won't connect. The 2008 servers have no issue telneting to either bing or google on port 80 and none of my client
PCs on the network do either.
    5.) Windows Update will not connect and neither will any other update service such as AVG (I have AVG Antivirus installed WITHOUT firewall on two of the three servers. The base 2012 VM has no software installed and no roles...I built it
just to see if it could connect after a fresh install and it still cannot.)
    6.) The network connection does not indicate limited connectivity (probably because ICMP appears to be passing successfully)
     7.) If I connect the server directly to the modem it has full internet access.
     8.) All internal LAN connectivity is perfectly fine and runs at full speed.
     9.) I have scoured the internet trying to find other examples of this particular kind of connectivity issue on 2012 and I have found two TechNet articles that are similar, but they both had the same resolution: changing the router
worked, but no one knows why. (I would have included the links, but apparently I cannot do that yet)
My question is this: What is different about Windows Server 2012 networking that would render it unable to communicate through a router that Windows Server 2008 has no problems with? I ask because, unlike in these two articles where they were
running personal networking equipment they could easily upgrade, I'm running a Cisco 881 with what should be virtually limitless configuration options and I have no desire to replace it. I have to assume the issue is somehow related to the firewall configuration,
which I could fix easily, but I don't know what to change. If anyone knows what changed in 2012 and why I would be able to browse to bing and other MS sites but no where else, please pass them along. Thanks.

This is the IP Config for the 2012 DC:
Windows IP Configuration
   Host Name . . . . . . . . . . . . : COMPANYDC02
   Primary Dns Suffix . . . . . . . : company.local
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : company.local
Ethernet adapter Ethernet:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Intel(R) 82574L Gigabit Network Connection
   Physical Address. . . . . . . . . : 00-25-90-DC-EF-D5
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::81d5:53cf:bd07:14ed%12(Preferred)
   IPv4 Address. . . . . . . . . . . : 10.10.10.202(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 10.10.10.1
   DHCPv6 IAID . . . . . . . . . . . : 301999504
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-96-D5-C3-00-25-90-DC-EF-D5
   DNS Servers . . . . . . . . . . . : 10.10.10.202
                                       10.10.10.221
   NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{9929D989-8E88-4096-A1CB-61F1DB173FA3}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft Teredo Tunneling Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
This is the IP Config for the fresh install 2012 VM:
Windows IP Configuration
   Host Name . . . . . . . . . . . . : WIN-800299O7ES6
   Primary Dns Suffix . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : company.local
Ethernet adapter Ethernet:
   Connection-specific DNS Suffix . : company.local
   Description . . . . . . . . . . . : Microsoft Hyper-V Network Adapter
   Physical Address. . . . . . . . . : 00-15-5D-0A-5C-02
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   IPv4 Address. . . . . . . . . . . : 10.10.10.49(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Saturday, August 23, 2014 10:23:01 PM
   Lease Expires . . . . . . . . . . : Wednesday, August 27, 2014 10:23:01 PM
   Default Gateway . . . . . . . . . : 10.10.10.1
   DHCP Server . . . . . . . . . . . : 10.10.10.1
   DNS Servers . . . . . . . . . . . : 10.10.10.220
                                       10.10.10.221
   NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.company.local:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . : company.local
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
NOTE: 10.10.10.220 and 10.10.10.221 are the other domain controllers on my network. One of them is 2012 and one of them is 2008. They are both functioning correctly for providing DNS services. The 2012 Virtual DC, however, still has
the internet connectivity issue that this whole post was about in the first place.
NOTE2: When I logged on to COMPANYDC02 this morning, it told me that I had new Windows Updates that needed to be downloaded.   Confused, I checked the most recent time WU had checked for updates at it had successfully checked for updates last night
at 10pm. Of course, it failed when trying to download them, but it appears that once in a while, a connection gets through successfully...

Windows Server 2012 CA will not allow Windows XP to autoenroll

I have a Windows Server 2012 Domain Controller with an Enterprise root CA installed. I have created a client authentication certificate template (2003 compatible). Domain Computers have Read, Enroll and Autoenroll permissions. I modified
the Domain Policy to enable Certificate autoenrollment. I have two clients on the same subnet with the domain controller, one Windows 7 Ent SP1 and one Windows XP SP3. The problem: Windows 7 reboots, has client auth cert installed in computer's
personal cert store. The Windows XP machine cannot acquire the certificate. Event ID 13, source is AutoEnrollment, 0x80094011,The permissions on this certification authority do not allow the current user to enroll for certificates. Both machines
belong to the domain. Running gpudate /force on the XP machine generates an info event stating that the computer security policy has be applied successfully, then the autoenrollment error. I've setup autoenrollment dozens of times without any
problems. The only thing different in this environment is that the CA is installed on Server 2012. I could be something else, but the only real difference is Server 2012. There are no errors on the server. It is like the client just
cannot talk to the server at all, but it's getting its policy from that server.
Any ideas?

http://technet.microsoft.com/en-us/library/hh831373.aspx
What works differently?
Windows XP clients
will not be compatible with this higher security setting enabled by
default on a Windows Server 2012 CA. If necessary, you can lower the
security setting as previously described.
Try run this command:
certutil -setreg CA\InterfaceFlags +IF_ENFORCEENCRYPTICERTREQUEST
Restart the certification authority
net stop certsvc
net start certsvc
INFO FROM LINK:
What value does this change add?
The CA
enforces enhanced security in the requests that are sent to it. This
higher security level requires that the packets requesting a certificate
are encrypted, so they cannot be intercepted and read. Without this
setting enabled, anyone with access to the network can read packets sent
to and from the CA using a network analyzer. This means that
information could be exposed that might be considered a privacy
violation, such as the names of requesting users or machines, the types
of certificates for which they are enrolling, the public keys involved,
and so on. Within a forest or domain, leaking these data may not be a
concern for most organizations. However, if attackers gain access to the
network traffic, internal company structure and activity could be
gleaned, which could be used for more targeted social engineering or
phishing attacks.
The commands to enable the enhanced security
level of RPC_C_AUTHN_LEVEL_PKT on Windows Server® 2003,
Windows Server® 2003 R2, Windows Server® 2008, or Windows
Server 2008 R2 certification authorities are:
certutil -setreg CA\InterfaceFlags +IF_ENFORCEENCRYPTICERTREQUEST
Restart the certification authority
net stop certsvc
net start certsvc
If
you still have Windows XP client computers that need to request
certificates from a CA that has the setting enabled, you have two
options:

Windows Server 2012 R2 will not install when Server 2012 non-R2 installs fine.

Our company has several Windows Server 2012 servers that installed and work without issues. However, we purchased several Server 2012 R2 licenses to install on the exact same hardware, and at the very beginning of the install process it does not recognize
any of the hard drives, and cannot continue with the install. I have put the drivers that the non-R2 servers use on a flash drive, and tried to use those drivers during the R2 installs, but none work. This is extremely frustrating, and I want to know what
my options are? Is it a signed driver issue? Can I disable signed driver checks before installing R2? Thanks for any help.
P.S. I will even consider downgrading the Server 2012 R2 licenses to standard 2012 if that is even possible? I don't think I can get a refund on the media.

Contact your server vendor to see if they support 2012 R2 on the platform you are working with. They are the ones who determine what firmware/drivers get released for what versions of the operating system.
"R2 2012 and using them for R2 does not work as it just rejects them or says no new device drivers were found."
Are you trying to load them during the installation process when it gives you the option to load drivers? I've never seen a 'no new device drivers were found' message at that point because you are specifically telling it which driver to use.
Yes, the license for a retail copy of the operating system contains downgrade rights. However, activation keys are different. You may have to contact Microsoft or the vendor from whom you purchased your copy to obtain a 2012 activation key.
. : | : . : | : . tim

Windows Server 2012 R2 robocopy not copying inherited directory permission from source file server to destination ?

Can anyone here please help me with Robocopy on Windows Server 2012 R2 to copy the file server content from \\OldFileServer\Data share into the local S:\Data drive ?
here's my script that I use to copy 11 TB of file server contents:
robocopy.exe "\\OLDFILESERVER\Data" S:\Data *.* /E /SECFIX /SEC /XO /ZB /COPYALL /MIR /DCOPY:DAT /R:0 /W:0 /NP /NFL /NDL /TEE /LOG:"G:\robocopy.log"
Any kind of help and assistance would be greatly appreciated.
Thanks
/* Server Support Specialist */

Hi,
Based on my tests, inherited permissions will not be copied using robocopy.exe.
That’s because that after we copy or move an objects to another volume, the object inherits the permissions of its new parent folder.
My suggestion for you is to disable the inheritance on corresponding subfolders, and Convert inherited permissions into explicit permissions on this object. After that, those permissions can be copied.
Here are some references below for you:
Robocopy not copying NTFS permissions
http://social.technet.microsoft.com/Forums/windowsserver/en-US/b36748cd-14d1-47a5-9fb6-878ca93ad6fc/robocopy-not-copying-ntfs-permissions
How permissions are handled when you copy and move files and folders
http://support.microsoft.com/kb/310316
Powershell ACL commands? NTFS Permissions - Turn inherited permissions into explicit permissions and remove inheritance
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/884e2837-ec1d-4937-83a5-722cd00d7d16/powershell-acl-commands-ntfs-permissions-turn-inherited-permissions-into-explicit-permissions-and?forum=ITCG
Best Regards,
Amy

Windows deployment services in windows server 2012 : operating system not found

Hello,
In order of learning WDS in Windows Server 2012, I created a simple test environment composed of :
A Domain controler running WS 2K12 and hosting both DHCP and WDS services. (with the option of not listening port 67 checked while installing WDS)
A test computer, with no operating system
I also added a Windows Server 2012 Standard WIM file and added also (located in [DVD]\sources\install.wim), boot file image (located in [DVD]\sources\boot.wim)
But now, when i start the client, it gives the following error:
While i don't find any reliable solution on Internet, Im looking for your help if ever, anyone faced this problem and found a solution for it or not
Thanks in advance!
Lotfi BOUCHERIT

I find it strange that client and server IP are the same. Is there any sort of DHCP relay agent running on your WDS server ?

MDT 2013, WDS, Server 2012 R2 multicasting not working rc = -1073740940

Hi,
I have been reading all over the internet and not able to find an issue that we are having. We have setup MDT 2013 and WDS on a Server 2012 R2 server. Unicast has been working fine for us and we have the PXE boot working great too. We have
recently tried setting up Multicast. Every time we try and deploy an image we receive the following error when the client tries to run the multicast. I have pulled this error from the ltiapply.log on the client. The error is:
Multicast transfer could not be completed, rc = -1073740940, falling back to using \\mdtserver\deploymentshare\operating systems. We have also made sure we have IGMP enabled on all our switching and VLan's. We have tested with mcast.exe
and Wireshark and the packets are hitting the machine for multicast but we always seem to get this error. Any help would be great.
Thanks,

MDT logs the output from the wdsmcast.exe command itself within the bdd.log file.
A quick scan reveals:
Multicast transfer to directory: C:\MININT\Operating Systems\BaseWin7x64_6_17_2014
<Message containing password has been suppressed>
Command has been started (process ID 776)
Console >
Console > Windows Deployment Services Multicast Client [Version 6.3.9600.17029]
Console > Copyright (c) Microsoft Corporation. All rights reserved.
Console >
Console >
Console > Operation Failed. [0x80070523].
Console >
Console > The name provided is not a properly formed account name.
Console >
Console >
Return code from command = -1073740940
"Not a properly formed account name"?!?!? What?
MDT will pass the user account credentials to the wdsmcast.exe command using the USERID value.
SO... What is UserID set to?
Property USERID is now = vdl-mdt\helpdesk ZTIGather 7/29/2014 8:27:55 AM 0 (0x0000)
Whoops! UserID should not contain the domain name, instead it should just contain the user name.
USERID=Helpdesk
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

Windows server 2012 R2 does not recognize DVD burner as read/write device

I've seen problem fixes for this on Windows 7 but nothing on 2012 R2.
I changed the drive letter on the server (2012 R2 with all current updates) and now it does not recognize the working DVD burner as a read/write device.
The device does work correctly with other Operating Systems on the same hardware. The box is a Lenovo D30.
Any idea as to how to go about this fix. All Microsoft troubleshooter downloads run and say the problem was corrected but no luck in burning anything.

Hi,
Did you run this?
http://support.microsoft.com/mats/cd_dvd_drive_problems
Regards.
Vivian Wang

SHAREPOINT 2013 WITH SQL SERVER 2012 REPORTING SERVICES - NOT WORKING

The SQL 2012 with SP1 is installed but the Reporting Services are not working and not able to connect the Sharepoint with it.
i also TRIED TO install THE ADD-ON (rsSharePoint.msi) but it doesn't connect and show the Sharepoint Mode and cannot connect the Reporting services.
If I install the Reporting Native feature then the reporting service config displays the Instance else doesn't show and connect to the sql server.
But I am able to access the Configuration manager and TCP/IP are enabled.
I have installed SQL 2012 and Sharepoint 2013. Please revert soon.
Tks - Vinay

Reporting Service
http://msdn.microsoft.com/en-us/library/jj219068.aspx
http://blogs.msdn.com/b/biblog/archive/2012/12/04/installing-and-configuring-sql-reporting-services-on-sharepoint-2013.aspx
http://blogs.msdn.com/b/psssql/archive/2011/02/18/sharepoint-adventures-setting-up-reporting-services-with-sharepoint-integration.aspx
http://dinesql.blogspot.in/2010/06/configuring-reporting-services-2008-r2_07.html
http://www.codeproject.com/Articles/355461/Dynamically-Pointing-to-Shared-Data-Sources-on-SQL
http://www.heysharepoint.com/problems-with-sql-2012-reporting-services/
http://andrewcbancroft.com/2012/06/30/troubleshooting-sql-server-2012-reporting-services-and-sharepoint-2010-integration-part-1/
Please find the helping URL
Thanks
Jaison A
http://infomoss.blogspot.in

Windows Backup for Windows Server 2008 R2 Standerd not working 2155348041

Hi
When I am running backups via the Backup server feature I keep getting the following error in the event log:
The backup operation that started at '‎2014‎-‎05‎-‎27T04:59:16.185618200Z' has failed with following error code '2155348041' (None of the source volumes were backed up.). Please review the event details for a solution, and then rerun the backup operation
once the issue is resolved.
The backup report gives me the following error:
the request could not be performed because of an i/o
I have tried using another Harddrive and have installed the Hotfix from windows but still get this error.
I also tried Re Installing the Backup feature this also did not work.
Regards
Roan_B

Hi,
Please run the command below to get the drive's sector size to check if the sector size is 512B. Windows Server Backup only support sector size of 512B.
wmic partition get BlockSize, StartingOffset, Name, Index
Backup fails with Error Code 2155348041
http://social.technet.microsoft.com/Forums/en-US/fa704bd6-b76a-42b4-b8cb-0a93ceb6ce43/backup-fails-with-error-code-2155348041
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows Server 2008 xml sync not working

Windows Server 2008 message - xml sync has stopped working. this is preventing me from having my documents automatically upload to a client website for their viewing. these file are uploaded with FTP automatically when
printed form the computer. I will also get an error that SBS Console has stopped working and restart. The console will then work after clicking restart. These are probably related issues. Appreciate any step by step instructions to
get the XML Sync issue resolved so hopefully documents will upload again.

Hi,
à
Windows Server 2008 message - xml sync has stopped working.
Would you please let me know more details of this issue? Please let me know the complete error message or provide
a screenshot of it. (please hide or remove all private and protected information.) Did you remember which specifc operation had been done before this issue occurred? For examples, install updates or install third-party applications?
à
I will also get an error that SBS Console has stopped working and restart.
For the SBS console issue, please follow the path:
C:\Program Files\Windows Small Business Server\Logs and check Console log file if find more relevant clues.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Windows Server 2012 WU agent not reporting to SCCM 2012

Hi folks,
Having a bit of trouble tracking down this issue with a particular WS2012 SCCM client. Unlike my other WS2012 servers that are SCCM clients in the same device collection (confirmed that this device is in the list), this one has a completely blank updates
compliance report which indicates that it's not reporting back at all.
In SCCM the policy request and heartbeat DDR are current, with last status message 5 days ago. Client activity is 'Active'.
WindowsUpdate.log has only this message when wuauclt /detectnow is run:
'Can not perform non-interactive scan if AU is interactive-only'
Couldn't find much on the interwebs about that message. I've tried re-installing the SCCM agent from scratch a few times. Ideas? Thanks in advance for any suggestions you might have.

Hi Jason,
Yes I have reviewed the logs in their entirety, I was editing to provide highlights.
Here is a broader snippet of WUAHandler.log, this is pretty much repeated:
Its a WSUS Update Source type ({4B3E3824-D6C3-463B-8FDC-4C24DAD400CF}), adding it. WUAHandler 26/11/2014 10:17:05 AM 4752 (0x1290)
Existing WUA Managed server was already set (http://<server>:8530), skipping Group Policy registration. WUAHandler 26/11/2014 10:17:05 AM 4752 (0x1290)
Added Update Source ({4B3E3824-D6C3-463B-8FDC-4C24DAD400CF}) of content type: 2 WUAHandler 26/11/2014 10:17:05 AM 4752 (0x1290)
Scan results will include superseded updates only when they are superseded by service packs and definition updates. WUAHandler 26/11/2014 10:17:05 AM 4752 (0x1290)
Search Criteria is (DeploymentAction=* AND Type='Software') OR (DeploymentAction=* AND Type='Driver') WUAHandler 26/11/2014 10:17:05 AM 4752 (0x1290)
Async searching of updates using WUAgent started. WUAHandler 26/11/2014 10:17:05 AM 4752 (0x1290)
Here is a sample WindowsUpdate.log session, interestingly the last three lines are a new error as of today.
2014-11-26 10:14:49:564 848 17c AU #############
2014-11-26 10:14:49:564 848 17c AU Triggering Online detection (interactive)
2014-11-26 10:14:52:575 848 11b8 AU #############
2014-11-26 10:14:52:575 848 11b8 AU ## START ## AU: Search for updates
2014-11-26 10:14:52:575 848 11b8 AU #########
2014-11-26 10:14:52:638 848 11b8 Report *********** Report: Initializing static reporting data ***********
2014-11-26 10:14:52:638 848 11b8 Report * OS Version = 6.2.9200.0.0.196880
2014-11-26 10:14:52:638 848 11b8 Report * OS Product Type = 0x00000007
2014-11-26 10:14:52:638 848 11b8 Report * Computer Brand = VMware, Inc.
2014-11-26 10:14:52:638 848 11b8 Report * Computer Model = VMware Virtual Platform
2014-11-26 10:14:52:638 848 11b8 Report * Platform Role = 1
2014-11-26 10:14:52:638 848 11b8 Report * AlwaysOn/AlwaysConnected (AOAC) = 0
2014-11-26 10:14:52:638 848 11b8 Report * Bios Revision = 6.00
2014-11-26 10:14:52:638 848 11b8 Report * Bios Name = PhoenixBIOS 4.0 Release 6.0
2014-11-26 10:14:52:638 848 11b8 Report * Bios Release Date = 2013-07-30T00:00:00
2014-11-26 10:14:52:638 848 11b8 Report * Bios Sku Number unavailable.
2014-11-26 10:14:52:638 848 11b8 Report * Bios Vendor = Phoenix Technologies LTD
2014-11-26 10:14:52:638 848 11b8 Report * Bios Family unavailable.
2014-11-26 10:14:52:638 848 11b8 Report * Bios Major Release = 4
2014-11-26 10:14:52:638 848 11b8 Report * Bios Minor Release = 6
2014-11-26 10:14:52:638 848 11b8 Report * Locale ID = 3081
2014-11-26 10:14:52:653 848 11b8 AU <<## SUBMITTED ## AU: Search for updates [CallId = {A97CA8F0-B911-42D1-B1BC-FAAA0F1F053A} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
2014-11-26 10:14:52:653 848 1250 Agent *************
2014-11-26 10:14:52:653 848 1250 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-11-26 10:14:52:653 848 1250 Agent *********
2014-11-26 10:14:52:653 848 1250 Agent * Online = Yes; Ignore download priority = No
2014-11-26 10:14:52:653 848 1250 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-11-26 10:14:52:653 848 1250 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-11-26 10:14:52:653 848 1250 Agent * Search Scope = {Machine & All Users}
2014-11-26 10:14:52:653 848 1250 Agent * Caller SID for Applicability: S-1-5-18
2014-11-26 10:14:52:653 848 1250 EP Got WSUS Client/Server URL: "http://SCCM1.<domain>:8530/ClientWebService/client.asmx"
2014-11-26 10:14:52:669 848 1250 Setup Checking for agent SelfUpdate
2014-11-26 10:14:52:669 848 1250 Setup Client version: Core: 7.8.9200.16731 Aux: 7.8.9200.16731
2014-11-26 10:14:52:669 848 1250 EP Got WSUS SelfUpdate URL: "http://SCCM1.<domain>:8530/selfupdate"
2014-11-26 10:14:52:684 848 1250 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-11-26 10:14:52:700 848 1250 Misc Microsoft signed: Yes
2014-11-26 10:14:52:700 848 1250 Misc Infrastructure signed: Yes
2014-11-26 10:14:52:700 848 1250 Setup Skipping SelfUpdate check based on the /SKIP directive in wuident
2014-11-26 10:14:52:700 848 1250 Setup SelfUpdate check completed. SelfUpdate is NOT required.
2014-11-26 10:14:52:731 848 1250 PT +++++++++++ PT: Synchronizing server updates +++++++++++
2014-11-26 10:14:52:731 848 1250 PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://SCCM1.<domain>:8530/ClientWebService/client.asmx
2014-11-26 10:14:52:762 848 1250 PT WARNING: Cached cookie has expired or new PID is available
2014-11-26 10:14:52:762 848 1250 EP Got WSUS SimpleTargeting URL: "http://SCCM1.<domain>:8530"
2014-11-26 10:14:52:762 848 1250 PT Initializing simple targeting cookie, clientId = 2ee7d06e-e813-40e2-87cb-bf8156b1327a, target group = , DNS name = xdm2.<domain>
2014-11-26 10:14:52:762 848 1250 PT Server URL = http://SCCM1.<domain>:8530/SimpleAuthWebService/SimpleAuth.asmx
2014-11-26 10:14:52:887 848 1250 Agent Reading cached app categories using lifetime 604800 seconds
2014-11-26 10:14:52:887 848 1250 Agent Read 0 cached app categories
2014-11-26 10:14:58:534 848 358 AU Triggering AU detection through DetectNow API
2014-11-26 10:14:58:534 848 358 AU Piggybacking on an AU detection already in progress
2014-11-26 10:17:05:021 4568 1290 COMAPI -------------
2014-11-26 10:17:05:021 4568 1290 COMAPI -- START -- COMAPI: Init Search [ClientId = CcmExec]
2014-11-26 10:17:05:021 4568 1290 COMAPI ---------
2014-11-26 10:17:05:021 4568 1290 COMAPI -------------
2014-11-26 10:17:05:021 4568 1290 COMAPI -- START -- COMAPI: Search [ClientId = CcmExec]
2014-11-26 10:17:05:021 4568 1290 COMAPI ---------
2014-11-26 10:17:05:021 4568 1290 COMAPI <<-- SUBMITTED -- COMAPI: Search [ClientId = CcmExec]
2014-11-26 17:14:00:628 848 11b8 Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 2, GetLastError=2250
2014-11-27 17:01:25:281 848 11b8 Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 2, GetLastError=2250
2014-11-27 17:01:26:594 848 11b8 Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 2, GetLastError=2250
Let me know if the entire log files would be useful to post, any suggestions appreciated.
Thanks,
Ben

WSUS in Windows Server 2012 R2 is not downloading update files.

I'm not using Proxy server and this is the only WSUS server in our environment and update source is to sync from Microsoft Update site.
Synchronization completes successfully and every update files is not downloading. When I look at the download status from the main page, it said it downloaded, but when I look at the files from updates folder, it said failed to download.
I'm getting following error messages:
Content file download failed.
Reason: The server does not support the necessary HTTP protocol. Background Intelligent Transfer Service (BITS) requires that the server support the Range protocol header.
Source File: /c/msdownload/update/software/crup/2013/12/windows8.1-kb2903939-x64_a8ae5dc28899c892b46c9aa9c8aa71e2d3961a79.cab
Destination File: e:\wsus\WsusContent\79\A8AE5DC28899C892B46C9AA9C8AA71E2D3961A79.cab
John

Hi,
This is most likely a problem with a proxy server or firewall. Since you don’t have a proxy server, then firewall could be the culprit.
Error message when you try to download a file by using the Background Intelligent Transfer Service: "Content file download failed"
http://support.microsoft.com/kb/922330
Make sure your firewall support HTTP 1.1 range requests. If it still doesn’t help, try the following workaround:
If you are unable resolve this issue from the proxy/firewall side, then try these steps as a workaround on the WSUS server,
Set BitsDownloadPriorityForeground=1 using osql.exe on WSUS SQL instance.
net stop WSUSservice
CD "%ProgramFiles%\Update Services\tools\osql"
osql.exe -S <SQL instance name> -E -b -n -Q "USE SUSDB update tbConfigurationC set BitsDownloadPriorityForeground=1"
net start WSUSservice
Original post in this
blog.
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Hope this helps.

Windows Server 2003 Updates are not working

Hello Dear Support
Please can you help me to sort out the issue for the Windows Updates, I cannot install automatically it is giving me error message " Failed"
What can be reason what i need to follow, i tried but couldn't figure out the exact problem
Kind Regards, Muneeb

Hi,
Please try below:
Step 1: Register DLL files
===================
By trying this step, we can check if the update engines are working properly.
1. Close all instances of Internet Explorer.
2. Click Start and Run, type "REGSVR32 ATL.DLL" (without quotes) in the open box and click OK.
Note: There is a space between REGSVR32 and ATL.DLL
3. Similarly, one by one, register the files listed below:
REGSVR32 MSXML3.DLL
REGSVR32 WUAPI.DLL
REGSVR32 WUAUENG.DLL
REGSVR32 WUAUENG1.DLL
REGSVR32 WUPS2.DLL
REGSVR32 WUCLTUI.DLL
REGSVR32 WUPS.DLL
REGSVR32 WUWEB.DLL
REGSVR32 QMGR.DLL
REGSVR32 QMGRPRXY.DLL
REGSVR32 JSCRIPT.DLL
Note: Please try and register all the files. While registering each .DLL file you should get a "succeeded" message. If you encounter any error message, please let me know the exact
wording.
If the issue persists, let's move on to the steps below to verify Windows Update services and temporary folders.
Step 2: Verify the relevant Windows Update services
========================================
1. Click Start->Run, type "services.msc" (without quotation marks) in the open box and click OK.
2. Double click the service "Automatic Updates".
3. Click on the "General" tab; make sure the "Startup Type" is "Automatic". Then please click the button "Stop" under "Service Status" to stop the service.
4. Then please click the button "Start" under "Service Status" to start the service.
5. Please repeat the above steps with another service: Background Intelligent Transfer Service.
If it still does not resolve the issue, let's proceed to step 3.
Step 3: Reload the Windows Update temporary folder
========================================
One possible cause is that the temporary folder for Windows Update contains corrupted files. Let's erase all the files there to get the system clean.
1. Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window.
Net stop WuAuServ
2. Click Start, Run, type: %windir% and press Enter.
3. In the opened folder, rename the folder SoftwareDistribution to Sdold.
4. Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window.
Net start WuAuServ
Please test the issue again via the Windows Update website and let me know the result. If the issue persists, to clarify the issue and provide more accurate troubleshooting steps,
please assist me in collecting the following information.
How to capture a screenshot
======================
1. When the error appears, please press the Print Screen key (PrtScn) on your keyboard.
2. Click Start, click Run, type MSPAINT, and click OK.
3. In Paint, click Paste under the Edit Menu, click Save under the File menu, type a file name for the screenshot, choose JPEG as "Save as type", click "Desktop" on the left pane, and click Save.
How to collect System Information
==========================
The System Information can provide us with more information about the current status of the system. I would like to check it for you. Please send it to me using the following steps:
1. Click "Start", go to "Run", type in "MSINFO32" (without quotation marks) and press Enter to start System Information.
2. On the popup window, on the menu bar, click "File", and click "Save to"; save it as an NFO file, such as "system.nfo" to your local Desktop.
3. Find the file, right-click on this file, click "Send To", and click "Compressed (zipped) Folder".
How to collect the Windows Update log file
================================
Note: Since there are two Windows Update log files with similar names, please be aware that I am requesting the "WindowsUpdate.log" file without a space in the middle of the name.
1. Click on Start, Run and type "WindowsUpdate.log" (without the quotes)
2. Click on the OK button. We will see a file named "WindowsUpdate.log"
3. Now click on the "File" menu and then click on the "Save As" and select "Desktop" in the "Save in" option on the top of the window.
4. Click on the Save button. The file will be saved to your Desktop.
Please upload the above files to
https://sftus.one.microsoft.com/choosetransfer.aspx?key=0fd9ebfc-9943-44db-9c18-f2bd879208ba
Password: hF6!vkC-6QBf4Q
Tim Quan

Sql server 2012 Logon trigger not working for certain logins

Hello. I created a login trigger to insert data for each login in a table, and it works for all logins except one that is format domain\login
and the login ends with the dollar sign(actual name is domain\CTXDEVDCSI1$).
I had been using varchar, but after reading other forum posts, I changed the varchar's to nvarchar's, but it still fails for that id.
The errors written to the sql server error log were the usual "login failed due to trigger execution".
I had granted insert on the rvvlogindata table in dsa to public, and only one id wasn't able to login after that.
Any suggestions would be much appreciated!
Here's the modified table ddl:
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[rvvlogindata](
[sessionId] [int] NULL,
[LoginTime] [datetime] NULL,
[HostName] [nvarchar](50) NULL,
[ProgramName] [nvarchar](300) NULL,
[LoginName] [nvarchar](50) NULL,
[ClientHost] [nvarchar](50) NULL
) ON [PRIMARY]
GO
Here's the logon trigger code:
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
create trigger [LOGIN_IP_RESTRICTION] on all server for logon
as
Begin
Declare @LogonTriggerData xml,
@EventTime datetime,
@LoginName nvarchar(50),
@ClientHost nvarchar(50),
@HostName nvarchar(50),
@AppName nvarchar(300)
Set @LogonTriggerData = eventdata()
set @EventTime = @LogonTriggerData.value('(/EVENT_INSTANCE/PostTime)[1]', 'datetime')
set @LoginName = @LogonTriggerData.value('(/EVENT_INSTANCE/LoginName)[1]', 'varchar(50)')
set @ClientHost = @LogonTriggerData.value('(/EVENT_INSTANCE/ClientHost)[1]', 'varchar(50)')
set @HostName = HOST_NAME()
set @AppName = APP_NAME()
insert into dsa.dbo.rvvlogindata
sessionId,
LoginTime,
HostName,
ProgramName,
LoginName,
ClientHost
select @@spid,
@EventTime,
convert(nvarchar(50),@HostName),
convert(nvarchar(300),@AppName),
convert(nvarchar(50),@LoginName),
convert(nvarchar(50),@ClientHost)
END
GO
SET ANSI_NULLS OFF
GO
SET QUOTED_IDENTIFIER OFF
GO
ENABLE TRIGGER [LOGIN_IP_RESTRICTION] ON ALL SERVER
GO

Erland, I wanted to add more info to my reply earlier today.
sp_who2 showed no blocking, activity monitor from my local PC SSMS showed no major waits or high i/o or cpu activity.
I was wondering if you have any suggestions on how to find out what was the cause of the 5+ minute wait for SSMS on the remote desktop to respond and fully come up.
I definitely can't put this in production with this hanging delay possibly occurring there.
I was connecting as read_user when it hung.
sp_who2 output at the time was:
1    BACKGROUND                    sa   .   . NULL LOG WRITER      54631 0 04/10
06:59:43
1    0
2    BACKGROUND                    sa   .   . NULL RECOVERY WRITER 8673 0 04/10 06:59:43
2    0
3    BACKGROUND                    sa   .   . NULL LAZY WRITER     300691 0 04/10
06:59:43
3    0
4    BACKGROUND                    sa   .   . NULL RESOURCE MONITOR 1207010 0 04/10 06:59:43
4    0
5    BACKGROUND                    sa   .   . NULL XE TIMER        38828 0 04/10
06:59:43
5    0
6    BACKGROUND                    sa   .   . NULL XE DISPATCHER   1404 0 04/10
06:59:43
6    0
7    BACKGROUND                    sa   .   . master SIGNAL HANDLER 0 0 04/10 06:59:43
7    0
8    BACKGROUND                    sa   .   . NULL LOCK MONITOR    179978 0 04/10
06:59:43
8    0
9    sleeping                      sa   .   . master TASK MANAGER    0 11 04/21
08:37:04
9    0
10   sleeping                      sa   .   . master TASK MANAGER    0 0 04/10
06:59:44
10   0
11   BACKGROUND                    sa   .   . master TRACE QUEUE TASK 546 0 04/10 06:59:44
11   0
12   BACKGROUND                    sa   .   . NULL SYSTEM_HEALTH_MO 4930 0 04/10 06:59:44
12   0
13   BACKGROUND                    sa   .   . NULL RECEIVE         422 0 04/10
06:59:45
13   0
14   BACKGROUND                    sa   .   . master CHECKPOINT      79137 31811 04/10
06:59:46
14   0
15   BACKGROUND                    sa   .   . master TASK MANAGER    1606 0 04/10
06:59:46
15   0
16   BACKGROUND                    sa   .   . NULL UNKNOWN TOKEN   0 0 04/10 06:59:46
16   0
17   sleeping                      sa   .   . master TASK MANAGER    0 74 04/21
08:37:04
17   0
18   sleeping                      sa   .   . master TASK MANAGER    0 0 04/21
08:18:49
18   0
19   sleeping                      sa   .   . master TASK MANAGER    0 0 04/21
08:30:29
19   0
20   sleeping                      sa   .   . master TASK MANAGER    0 1 04/21
08:37:14
20   0
21   sleeping                      sa   .   . master TASK MANAGER    0 7 04/21
08:30:59
21   0
22   sleeping                      sa   .   . master TASK MANAGER    16 4 04/21
08:37:44
22   0
23   sleeping                      sa   .   . master TASK MANAGER    0 15 04/21
08:39:24
23   0
25   BACKGROUND                    sa   .   . master BRKR EVENT HNDLR 0 95 04/10 06:59:48
25   0
30   BACKGROUND                    sa   .   . master BRKR TASK       0 0 04/10
06:59:48
30   0
31   BACKGROUND                    sa   .   . master BRKR TASK       16926 0 04/10
06:59:48
31   0
32   BACKGROUND                    sa   .   . master BRKR TASK       0 0 04/10
06:59:48
32   0
34   BACKGROUND                    sa   .   . master BRKR TASK       10701 0 04/10
06:59:48
34   0
51   sleeping                      edit_user INFADEVFS2      . dsa AWAITING COMMAND 0 0 04/21
03:16:56
51   0
52   sleeping                      reports_adm REPORTSDEVSI2   . JBOSS_Cluster_CRServer2011 AWAITING COMMAND 0 0 04/21
08:52:12 jTDS
52   0
53   sleeping                      NT AUTHORITY\SYSTEM SQLDEV2012      . msdb AWAITING COMMAND 0 0 04/10
06:59:58 SQLAgent - Email Logger                       53   0
54   sleeping                      AMERICAS\CTXDEVDCSI1$ CTXDEVDCSI1    . CitrixXDFarm1 AWAITING COMMAND 0 0 04/21
08:58:51 Citrix:Broker#1                               54   0
55   sleeping                      edit_user ASDEV1          . dsa AWAITING
COMMAND 0 0 04/21 08:55:27 jTDS
55   0
56   sleeping                      reports_adm REPORTSDEVSI2   . JBOSS_Cluster_CRServer2011 AWAITING COMMAND 0 0 04/21
08:52:12 jTDS
56   0
57   sleeping                      reports_adm REPORTSDEVSI2   . JBOSS_Cluster_CRServer2011 AWAITING COMMAND 0 0 04/21
08:52:12 jTDS
57   0
58   sleeping                      reports_adm REPORTSDEVSI2   . JBOSS_Cluster_CRServer2011 AWAITING COMMAND 0 0 04/21
08:52:12 jTDS
58   0
59   sleeping                      NT AUTHORITY\SYSTEM SQLDEV2012      . msdb AWAITING COMMAND 124 242 04/10
06:59:59 SQLAgent - Generic Refresher                  59   0
60   sleeping                      NT AUTHORITY\SYSTEM SQLDEV2012      . msdb AWAITING COMMAND 2790 1160 04/21
08:55:00 SQLAgent - Job invocation engine              60   0
61   sleeping                      reports_adm REPORTSDEVSI2   . JBOSS_Cluster_CRServer2011 AWAITING COMMAND 0 0 04/21
08:52:12 jTDS
61   0
62   sleeping                      reports_adm REPORTSDEVSI2   . JBOSS_Cluster_CRServer2011 AWAITING COMMAND 0 0 04/21
08:52:12 jTDS
62   0
63   sleeping                      reports_adm REPORTSDEVSI2   . JBOSS_Cluster_CRServer2011 AWAITING COMMAND 0 0 04/21
08:52:12 jTDS
63   0
64   sleeping                      reports_adm REPORTSDEVSI2   . JBOSS_Cluster_CRServer2011 AWAITING COMMAND 0 0 04/21
08:52:12 jTDS
64   0
65   sleeping                      reports_adm REPORTSDEVSI2   . JBOSS_Cluster_CRServer2011 AWAITING COMMAND 0 0 04/21
08:52:12 jTDS
65   0
66   sleeping                      edit_user INFADEVFS2      . dsa AWAITING COMMAND 0 0 04/21
03:16:56
66   0
67   sleeping                      reports_adm REPORTSDEVSI2   . JBOSS_Cluster_CRServer2011 AWAITING COMMAND 0 0 04/21
08:52:12 jTDS
67   0
68   sleeping                      edit_user DCMA10685       . dsa AWAITING COMMAND 0 0 04/21
08:56:47 jTDS
68   0
69   sleeping                      AMERICAS\CTXDEVDCSI1$ CTXDEVDCSI1    . CitrixXDFarm1 AWAITING COMMAND 0 0 04/21
08:58:49 Citrix:Configuration                          69   0
70   sleeping                      rvanveen DCMA8460        . master AWAITING COMMAND 1794 7120 04/21
08:51:37 Microsoft SQL Server Management Studio        70   0
71   sleeping                      xsp_user XSPDEVSI2       . xspv5 AWAITING COMMAND 0 0 04/21
08:58:52 .Net SqlClient Data Provider                  71   0
72   sleeping                      AMERICAS\CTXDEVDCSI1$ CTXDEVDCSI1    . CitrixXDFarm1 AWAITING COMMAND 0 0 04/21
08:56:01 Citrix:Monitor                                72   0
73   sleeping                      AMERICAS\CTXDEVDCSI1$ CTXDEVDCSI1    . CitrixXDFarm1 AWAITING COMMAND 0 0 04/21
08:58:30 Citrix:Monitor                                73   0
74   sleeping                      rvanveen DCMA8460        . master AWAITING COMMAND 16 2 04/21
08:53:37 Microsoft SQL Server Management Studio - Query 74   0
75   sleeping                      rvanveen DCMA8460        . loginaudit AWAITING COMMAND 0 22 04/21
08:50:29 Microsoft SQL Server Management Studio - Query 75   0
76   sleeping                      edit_user INFADEVFS2      . dsa AWAITING COMMAND 0 0 04/21
07:05:07
76   0
77   sleeping                      adm_jbossportal ASDEV1          . jbossportal AWAITING
COMMAND 0 0 04/21 08:40:27 jTDS
77   0
78   sleeping                      rvanveen DCMA8460        . master AWAITING COMMAND 110 542 04/21
08:46:17 Microsoft SQL Server Management Studio - Query 78   0
79   sleeping                      edit_user INFADEVFS2      . dsa AWAITING COMMAND 0 0 04/21
07:05:56
79   0
80   sleeping                      AMERICAS\CTXDEVDCSI1$ CTXDEVDCSI1    . CitrixXDFarm1 AWAITING COMMAND 0 0 04/21
08:58:54 Citrix:MachineCreation                        80   0
81   sleeping                      edit_user INFADEVFS2      . dsa AWAITING COMMAND 0 0 04/21
08:08:29
81   0
82   sleeping                      edit_user INFADEVFS2      . dsa AWAITING COMMAND 0 0 04/21
07:02:13
82   0
83   sleeping                      edit_user INFADEVFS2      . dsa AWAITING COMMAND 0 0 04/21
07:02:15
83   0
84   sleeping                      AMERICAS\CTXDEVDCSI1$ CTXDEVDCSI1    . CitrixXDFarm1 AWAITING COMMAND 0 0 04/21
08:58:44 Citrix:Monitor                                84   0
85   sleeping                      edit_user INFADEVFS2      . dsa AWAITING COMMAND 0 0 04/21
07:11:05
85   0
86   sleeping                      AMERICAS\CTXDEVDCSI1$ CTXDEVDCSI1    . CitrixXDFarm1 AWAITING COMMAND 0 0 04/21
08:58:53 Citrix:AdIdentity                             86   0
87   sleeping                      DAIWA_USA\admsql SQLDEV2012      . master AWAITING COMMAND 15 2 04/21
08:56:20 Microsoft SQL Server Management Studio - Query 87   0
88   sleeping                      AMERICAS\CTXDEVDCSI1$ CTXDEVDCSI1    . CitrixXDFarm1 AWAITING COMMAND 0 0 04/21
08:58:36 Citrix:SiteServices                           88   0
89   sleeping                      AMERICAS\CTXDEVDCSI1$ CTXDEVDCSI1    . CitrixXDFarm1 AWAITING COMMAND 0 0 04/21
08:58:42 Citrix:Host                                   89   0
90   sleeping                      AMERICAS\CTXDEVDCSI1$ CTXDEVDCSI1    . CitrixXDFarm1 AWAITING COMMAND 0 0 04/21
08:58:47 Citrix:ConfigurationLogging                   90   0
91   RUNNABLE                      rvanveen DCMA8460        . master SELECT INTO
15 51 04/21 08:58:46 Microsoft SQL Server Management Studio - Query 91   0
92   sleeping                      rvanveen DCMA8460        . master AWAITING COMMAND 63 30 04/21
08:52:34 Microsoft SQL Server Management Studio - Query 92   0
94   sleeping                      AMERICAS\CTXDEVDCSI1$ CTXDEVDCSI1    . CitrixXDFarm1 AWAITING COMMAND 0 0 04/21
08:58:53 Citrix:DelegatedAdmin                         94   0
95   sleeping                      DAIWA_USA\admsql SQLDEV2012      . loginaudit AWAITING COMMAND 173 27 04/21
08:56:10 Microsoft SQL Server Management Studio        95   0
96   sleeping                      xsp_user XSPDEVSI2       . xspv5 AWAITING COMMAND 0 0 04/21
08:58:33 .Net SqlClient Data Provider                  96   0
97   sleeping                      edit_user INFADEVFS2      . dsa AWAITING COMMAND 0 0 04/21
08:10:07
97   0
98   sleeping                      edit_user INFADEVFS2      . dsa AWAITING COMMAND 31 38 04/21
08:00:31
98   0
99   sleeping                      edit_user INFADEVFS2      . dsa AWAITING COMMAND 0 0 04/21
08:10:12
99   0
100 sleeping                      edit_user INFADEVFS2      . dsa AWAITING COMMAND 0 282 04/21
08:10:14
100 0
101 sleeping                      DAIWA_USA\admsql SQLDEV2012      . master AWAITING COMMAND 0 8 04/21
08:56:50 Microsoft SQL Server Management Studio        101 0
102 sleeping                      DAIWA_USA\admsql SQLDEV2012      . master AWAITING COMMAND 31 0 04/21
08:54:57 Microsoft SQL Server Management Studio        102 0
103 sleeping                      read_user SQLDEV2012      . master AWAITING COMMAND 0 8 04/21
08:57:09 Microsoft SQL Server Management Studio        103 0
104 sleeping                      read_user SQLDEV2012      . dsa AWAITING COMMAND 0 0 04/21
08:57:09 Microsoft SQL Server Management Studio        104 0
105 sleeping                      rvanveen DCMA8460        . tempdb AWAITING COMMAND 8875 336 04/21
08:58:54 Microsoft SQL Server Management Studio        105 0
106 sleeping                      read_user SQLDEV2012      . master AWAITING COMMAND 16 0 04/21
08:57:39 Microsoft SQL Server Management Studio        106 0
107 sleeping                      AMERICAS\CTXDEVDCSI1$ CTXDEVDCSI1    . CitrixXDFarm1 AWAITING COMMAND 0 0 04/21
08:58:47 Citrix:EnvTest                                107 0
108 sleeping                      edit_user INFADEVFS2      . dsa AWAITING COMMAND 2200 8514 04/21
08:00:31
108 0
109 sleeping                      edit_user INFADEVFS2      . dsa AWAITING COMMAND 0 0 04/21
07:05:56
109 0
110 sleeping                      rvanveen DCMA8460        . master AWAITING COMMAND 0 0 04/21
08:58:48 Microsoft SQL Server Management Studio        110 0
113 sleeping                      Citrix_adm CTXDEVSI1       . XenApp6 AWAITING COMMAND 284 777 04/21
08:51:33 Citrix IMA                                    113 0
119 sleeping                      AMERICAS\CTXDEVDCSI1$ CTXDEVDCSI1    . CitrixXDFarm1 AWAITING COMMAND 0 0 04/21
08:58:42 Citrix:ConfigurationLoggingData               119 0
120 sleeping                      AMERICAS\CTXDEVDCSI1$ CTXDEVDCSI1    . CitrixXDFarm1 AWAITING COMMAND 0 0 04/21
08:58:26 Citrix:Storefront                             120 0
125 sleeping                      edit_user INFADEVFS2      . dsa AWAITING COMMAND 0 0 04/16
13:55:16
125 0
126 sleeping                      edit_user INFADEVFS2      . dsa AWAITING COMMAND 16 0 04/16
11:25:30
126 0
131 sleeping                      echouliak DCMA10685       . master AWAITING COMMAND 139 8 04/14
15:26:55 Microsoft SQL Server Management Studio        131 0
135 sleeping                      echouliak DCMA10685       . dsa AWAITING COMMAND 0 0 04/14
15:24:52 Microsoft SQL Server Management Studio - Query 135 0
136 sleeping                      echouliak DCMA10685       . dsa AWAITING COMMAND 0 0 04/14
15:00:17 Microsoft SQL Server Management Studio - Query 136 0
140 sleeping                      edit_user INFADEVFS2      . dsa AWAITING COMMAND 0 0 04/21
07:05:56
140 0
145 sleeping                      edit_user INFADEVFS2      . dsa AWAITING COMMAND 0 0 04/21
07:05:56
145 0

Windows Server 2012 Snipping Tool Not Working

Similar Messages

Maybe you are looking for