Windows Server 2012 Standard Black Parts Windows

Hi,
I have to TURN OFF a VM with Windows Server 2012 because become unresponsive. After rebooting the server, some parts of the windows (taskbar, entry bar) turned black. I tried rebooting again, but it was unsuccessful. I don´t want to reinstall the OS again.
Something similar happened to me with Windows Server 2003 and the only thing I did was to change the registry with the correct entries. I didn´t find any equivalent in 2012.
Regards

Hi,
Do we have anti-virus software installed on the server? If yes, we can scan the server with the anti-virus software. Besides, does the server have enough disk space? We can run
Chkdsk command to check the status of the disk.
Chkdsk
http://technet.microsoft.com/en-us/library/bb491051.aspx
Moreover, we can try to perform a clean boot to troubleshoot the issue.
Regarding how to perform a clean boot and how to use it to troubleshoot, the following article can be referred to for more information.
How to perform a clean boot in Windows
http://support.microsoft.com/kb/929135
Best regards,
Frank Shen

Similar Messages

Windows Server 2012 Standard - HP OfficeJet Pro 8600 Plus printer not working after promoting to Domain Controller / AD Services

An associate and myself installed the built-in drivers for the HP OfficeJet Pro 8600 Plus multi-function (network) printer on a Windows Server 2012 Standard server installation and everything worked fine whenever I want to print anything directly from the
Windows Server machine (there's a reason for this, so please understand that ;) ).
We were able to print without any problems from the Windows Server 2012 machine, using the drivers from Microsoft. Mainly, because HP has not listed any specific support for Windows Server 2012, only Windows Server 2008 R2, however, the drivers that
came with Windows 2012 seem to work very well.
PROBLEM: I later had to promote the Windows Server 2012 to a Domain Controller, and created the Active Directory configurations, even enabled the Print Services. After doing all of that, the HP printer will not print anything. It's like all print
requests directly from the Windows Server go to Nil.
Has anyone encountered a problem like this before? The only thing I can think of is that after perhaps something affected printing directly once we promoted the server to being a DC, and added other features / roles. I even tried installing the
HP drivers for Windows Server 2008 R2, and the results are still the same...nothing prints. Trust me, the printer is set as the Default Printer and even when choosing to print, we make sure the HP OfficeJet Pro is selected, and is on, as other Windows
Client PC's can print to it directly.
Does anyone have any suggestions we could try? Thanks in advance.

While it is quite a while since this was posted - I can concur a similar issue exists.
We have spent the better part of a day trying to work out why other HP printers work fine but our 8620 prints are not printing and going to Nil. The print server is hosted on a shared DC. Comparing to the initial posters details, for some reason
it seems to be most commonly related to the OfficeJet Pro 8600/8610/8620/8630 series printers.
I ended up doing a print server migration from the domain controller to stand alone host and all printers now work from a single server rather than a mix. Domain controller OSes varied from 2008, 2012, 2012 R2 (tested with multiple) and only after
all of those failed then tried a stand alone server os machine as a last resort which worked fine. Printing directly from Win 7 / 8 /8.1 clients to the IP always worked.

Windows Server 2012 Standard and Essentials User CAL's

I've been running Windows Server 2012 Essentials in an organization that until recently stayed within the 25 user 50 network device limit specified by the license. Eventually we've grown beyond that. Since the Server 2012 Essentials machine had a non-transferable
OEM license I decided not to waste it by doing an in-place migration to Server 2012 Standard, and instead set up a new server with freshly purchased Server 2012 R2 Standard and migrated Active Domain roles to it, leaving the original server as a part of a
fail-over cluster.
We purchased 30 User CAL's for the 2012 R2, as required for 25+ staff members.
Now I am curious. The 2 servers that we have right now (2012 R2 Standard and 2012 Essentials) both maintain the same Active Directory and manage the same pool of users and workstations. Does that mean that the primary server with 30 User CAL's takes dominance
and sets the limit as to how many people are allowed to access the network. Or does it become a combination of purchased 30 CAL's + 25 Users hard-wired into the 2012 Essential edition?
Do these servers have to run separate domains with segregated pools of users in order to be license compliant for 30+ users or can they exist within the same same domain preserving individual user limits? What if the 2012 Essentials server maintains
one office location with fewer than 25 staff and the Standard R2 2012 server runs another office with fewer than 30 staff, while both offices are linked via a VPN for the purpose of sharing 3rd party licenses? Do individual user limits apply, or is it still
30 users max?
To sum up the question, I'd like to know whether I'd need to buy more user CAL's when we reach more than 30 staff at 1 or possibly 2 office locations.
Oh, and the device limit! 2012 R2 Standard under user CAL licensing scheme has no machine limits. Essentials is always capped at 50. When running one active directory, what's the legally allowed number of devices on the network? I assume it's unlimited.
Thanks.

Thank you for the reply.
My question then is how to transition while preferably keeping both physical servers.
Should a 2012 Standard key be purchased additionally for an in-place transition of 2012 Essentials machine to 2012 Standard (which at this point is as good as a fresh install)? Until then, should the Essentials 2012 server be taken offline entirely?
What about the situation where I described both servers running segregated networks with their own pools of users, only connected via a VPN for 3rd party license sharing? Is that configuration supported?
Also, if the configurations is unsupported, why are the servers able to share roles in first place? Why isn't there a software mechanism preventing interaction? What configuration do the servers themselves assume is in place?
Thanks again.

Windows Server 2012 Standard - OS licensing for physical servers

Hi,
With Windows Server 2012 Standard, I can install the OS on up to two virtual machines.
For physical machines, how many physical servers can I install the OS on if I don't use any VMs?
Thanks

Hi,
Just to add, each license covers up to two physical processors. If you have more than two physical processors in a server, you need to assign additional licenses for it.
More information, please refer to the link below:
Windows Server and Processor Cores… (Part 2): Windows Server 2012
Best regards,
Susie

Windows Server 2012 Standard License and VMs

Hi,
With one Window server 2012 Standard activated license, I will get 2 VMs. So is there a limit with Windows Server 2012 standard license I can stack and the the number of VMs I can create on one server or across servers (virtual environment). Consider that
all Windows server 2012 standard licenses are activated. If there is no limit on VM creation by add Standard license then why did Microsoft come with Data center licenses with unlimited VMs.
How does the standard license work on Vmware environment. Is there a limit on the number for VMs that we can create.
Please advise me.
Thanks.

If i had one server 2012 standard with its key, i could run it as a vm but not as a virtual host without having the license right?
a single WS2012STD license, allows you to run a server machine (hardware), if that hardware has no more than 2 processors. In this case, you can run 2 VMs, each VM is running WS2012STD. You can also run WS2012STD as the host hypervisor via Hyper-V.
So, that's really 3 OS installations, on the same 2proc machine. The limitation is that the host hypervisor OS is only permitted to do Hyper-V stuff, it's not permitted to use that OS for anything other than hypervisor functions.
If you implement in this way, you would only have purchased a single license for WS2012STD, so you would only have a single key, so you would use that key for the 3 OS installations.
If i bought the single server 2012 standard license, i'd be able to install it as a Host and activate with the key and it'd give me rights to run 2vms on it and for those vms i would have to have 2 keys to activate after installing server 2012 standart
software on them right?
see above.
if you buy via Volume Licensing, things change a little bit due to MAK/KMS keys (it gets a whole lot simpler :)
Sorry for being unclear on the clusters part, i meant HA/failover. we have 2 2008R2 enterprise servers in cluster with shared storage and i was trying to clarify how could i add more vms there.
assuming your failover solution involves traditional server hardware, each failover node is just another hardware machine, so, for each node you have to count up the procs and VMs, just as you would do for non-failover implementations.
if a server is installed and running/executing, it needs to be licensed.
with current configuration, each server is hosting 2vms and if anything happens single host can accommodate all four. I am assuming we have 2 enterprise licenses for them, but if i wanted to run 4vms on each host, we have to buy 2 more enterprise licenses
and install vm togerther with their keys?
There is no Enterprise for WS2012? (WS2012 has STD and DCE)
do you mean as in WS2008R2ENT ?
You can re-assign licenses from one machine to another machine (under the Volume Licensing terms. I'm not sure about Retail terms, you should check that). There are limitations on how often you can reassign licenses (no more than every 90days)
If hardware "fails", you are allowed to reassign the license in a shorter period than 90days.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

SharePoint 2013 OS: Windows Server 2008 R2 vs Windows Server 2012 Standard

Hi Team,
We are thinking on upgrading from SharePoint 2010 to SP 2013 soon. I have been researching about the server OS I should install as host, and it seems that SharePoint 2013 is fully compatible by now with both Windows Server 2008 R2 Standard + SP1 and
Windows Server 2012 Standard. In my opinion we should go with server 2012, but Windows server 2008 is the norm here at our organization and our Infrastructure team seems reluctant to upgrade servers to 2012 yet.
My question is, what SharePoint or Windows 2012 features will we miss if we decide to stay on Windows 2008? What are the perks (selling points) of going with 2012 over 2008? (besides the obvious Microsoft support range extension).
Thanks!
-Rob.

If you stay on Windows Server 2008 R2 you will enter the extended/out of support phase sooner, of course. You will miss out on IIS improvements, although in practical terms it may not mean much.
There are extra patches required for a 2008 R2 deployment that are not needed on 2012 for SharePoint 2013. But other than that, I think the other big issue is that mostly in the community, you'll find people running Server 2012 which means issues are better
'known' by the community, versus 2008 R2 in combination with SharePoint 2013.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

REMOTE DESKTOP SERVICES CLIENT ACCESS LICENSES FOR MICROSOFT WINDOWS SERVER 2012 STANDARD AND DATACENTER

I am using a window 7 professional service pack 1 and I purchase REMOTE DESKTOP SERVICES CLIENT ACCESS LICENSES FOR MICROSOFT WINDOWS SERVER 2012 STANDARD AND DATACENTER. but the seller did not send me any installation CD or instruction
on how to use it.
Please how can I use it on my window 7 professional service pack 1.
Thank you.

Though Bill is absolutely correct for most CALs, Remote Desktop Services does have its own special licensing server. I haven't installed one on 2012, yet, but here is a step-by-step guide for 2008.
http://technet.microsoft.com/en-us/library/dd983943(v=ws.10).aspx
Here is a lab guide for 2012 -
http://technet.microsoft.com/en-us/library/jj134160.aspx
But, the explanation of your environment begs the question - what are you trying to do? You say you have a desktop OS and you are talking about Windows Server products. In that light, your question does not make a lot of sense.
. : | : . : | : . tim

Is it possible to install SQL Server 2012 Standard Edition on a Windows Server 2012 Standard Which is installed on a Virtual Machine that is created by Hyper-V?

Hi
I have recently bought a Virtual Machine from a data center and installed a Windows Server 2012 Standard Edition on it. As I tried to install the SQL Server 2012 Standard Edition, the data center administrator denied me to do this telling me it is not possible
to install any licensed Microsoft software on a Windows installed on virtual machine created by Hyper-V. It was really strange for me! I wanna know if this is true.
Thanks Everybody

Hi Farid,
For SQL server running on virtual server please refer to following article :
http://blogs.technet.com/b/peeyusht/archive/2010/03/19/sql-licensing-under-virtualization.aspx
In addition , for license issue we still recommend you to contact MS Activation Center:
http://www.microsoft.com/licensing/existing-customers/activation-centers.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

How to install device cals on Windows Server 2012 standard edition

Hello i have a windows server 2012 standard edition licence that i have taken on rent from an ISP.
i have created a domain controller on that.
By default only two users can use remote desktop to the server simultaneously.
My Requirement is 20 users can use remote desktop to the server at the same time.For that i have purchased 20 Delive CALs licences like volume licencing.
i have the licence number noted on the paper.
do i need to install remote desktop services first etc ?
Could anyone guide me step by step how can i install or configure so that 20 users can use remote desktop on the same time.

Hi,
Any update about the issue?
I would agree with others, you need to install Remote Desktop Services Client Access Licenses.
There are three methods by which you can install Remote Desktop Services client access licenses (RDS CALs) onto your license server:
• Install Remote Desktop Services Client Access Licenses Automatically
• Install Remote Desktop Services Client Access Licenses by Using a Web Browser
• Install Remote Desktop Services Client Access Licenses by Using the Telephone
https://technet.microsoft.com/en-us/library/cc725890.aspx?f=255&MSPPError=-2147217396
Then you can install both Per User and Per Device CALs onto the same license server.
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Is it ok to install Exchange 2013 on Windows Server 2012 Standard?

Hello everyone,
I'd like to know if it is ok/safe to install Exchange Server 2013 on Windows Server 2012 Standard?
As I started doing some research and noticed a page where Microsoft states they don't recommend running Exchange on Server 2012 Standard, and recommend making 2 different servers one for Active Directory and another for Exchange.
On that page they also listed some features that wouldn't work in case of Exchange is running on Server 2012. And that it may put a larger data load if setup this way.
I am hoping someone knowledgeable can explain and tell me if it is safe to use such setup or if it is better to use something like SBS 2011 Standard instead, which has Exchange included?
Has anyone installed Exchange 2013 on Server 2012 Standard successfully and used it for more then several months without problems?
Also just to give an idea on my background, I've been in IT field fairly long but haven't really updated to newer versions much and mainly used SBS 2003 and 2008 only with a few clients so haven't used 2008 too much.
Thanks in advance.

Few things to note.
There is
NO SBS in 2012
All you need is a Std edition of Windows for Exchange 2013, as there is no difference in features between Std and Datacenter as far as Exchange is concerned.
For 10 users, you can have one box with both AD and Exchange. It is not MS recommeded, but it IS supported.
Rajith Enchiparambil |
http://www.howexchangeworks.com |

Migrate SBS 2003 to Windows Server 2012 Standard

We currently have two servers (SBS 2003 Standard utilizing Exchange 2003; Windows Server 2003 R2 Standard with SQL 2005).
We want to retire the SBS or maybe both.
We have purchased a new server (Windows Server 2012 Standard with licenses for Exchange 2013 and SQL 2012).
Is there a whitepaper that describes how to migrate SBS 2003 to Windows Server 2012 Standard?
Is it possible to run Exchange 2013 on the Windows Server 2012 box? In Hyper-V? If Exchange can run in a virtualized instance, do we need additional licensing to run another instance of Windows Server 2012 Standard?
Can we run SQL 2012 on the same Windows Server 2012 box?
We have about 35 users.

Sal,
Migration went fine. Steps i took:
Join 2012 Standard server as member.
Migrated roles.
I ended up manually creating new shares. The old environment was a mess.
Robocopy data/verified.
Seize FSMO roles
http://support.microsoft.com/kb/255504
Metadata cleanup
http://support.microsoft.com/kb/216498
Good luck

Unexpected Server Reboot on Windows Server 2012 Standard

Hi All,
I have received unexpected reboot on Windows Server 2012 Standard . After searching on the internet I found one
hotfix for this, but it is applicable for Windows 2008 R2. Link to download Windows 2008 R2
hotfix -
http://support.microsoft.com/kb/2732595/en-US
Can someone guide me to get a same
hotfix for Windows Server 2012 Standard.
Log Name:      System
Source:        User32
Date:          2/27/2014 7:27:17 AM
Event ID:      1074
Task Category: None
Level:         Information
Keywords:      Classic
User:          SYSTEM
Computer:      Server1.test.com
Description:
The process wininit.exe has initiated the restart of computer "Server1" on behalf of
user for the following reason: No title for this reason could be found
Reason Code: 0x50006
Shutdown Type: restart
Comment: The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code 255. The system will now shut down and restart.
Thank you.
Regards,
Mahesh Arban.

Hi Mahesh Arban,
Sorry for my delay.
I can’t find the same hotfix for Windows Server 2012 Standard. So, we may need to do some troubleshootings
to narrow down this issue and solve it.
Please let me confirm if you have installed all updates for this Windows Server 2012 Standard. Meanwhile, please
use Sfc command to scans and verifies the integrity of all protected system files.
In addition, this issue caused to unexpected server reboot. So, please configure and then collect the dump
file to analysis. It may help us to find the root cause of this issue.
How to read the small memory dump file that is created by Windows if a crash occurs
http://support.microsoft.com/kb/315263/en-us
By the way, can you find any error messages in application log (such as Event ID 1000 or others) after this
issue occurred?
Hope this helps.
Best regards,
Justin Gu

Error 0x80072ee7 when activating Windows Server 2012 Standard ROK

I am installing windows server 2012 standard ROK onto a HP Proliant micorsever. I installed the product key using elevated command prompt (found instructions on hp site), but when I get to the point to activate the operating system using the following
command cscript C:\windows\system32\slmgr.vbs -ato, I get an error message --> 0x80072ee7 On a computer running Microsoft windows non-core edition. Why is this happening? From prior research that I've done do I need to install a KMS Client
key and if so what is the proper key for the OS that I am using?

Hi,
The 0x80072EE7 error code may occur if the client computer cannot find the correct IP address when it tries to resolve a URL for the Windows Update Web site or for the Microsoft Update Web site. This error may occur if the Hosts file contains a static IP
address also might occur due to one of the following reason.
• Programs or processes that interfere with Internet communications
• Resource issues on the computer
• High Internet activity
To resolve the error examine the Host file (under System32\driver\etc folder) and check that Make sure that the file does not list any static IP entries for the Windows Update Web site or for the Microsoft Update Web site. Mean time sharing the article with
you.
1. 0x80072EE7 error code
2. KB 836941
Hope it helps!
Thanks.

Server 2012 Standard license and VM license for windows instances

Hi,
A question about VM instances on standard server 2012 license exists here
I cannot link it here as my account is not verified. The topic is titled "Windows Server 2012 Standard License and VMs"
My question is tad different...
If I understand this correctly, 1 windows server standard license provides support for 1 Physical Operating System Environment (The VM Host / POSE) and permission to run 2 Virtual Operating System Environment(VOSE).
Does this imply that I can install 2 additional instances of Windows Server 2012 Standard Edition on the permitted 2 VM instances on the server? Or... should I purchase additional licenses for each VOSE that runs windows?
Does the standard license provide rights to run 2 Virtual instances AND offer install and activation rights for 2 MS windows (virtual) environments AND install and activation rights for the windows host?
If license is require for each instance of server 2012 running on the VM ... can I avoid purchasing additional licenses for operating systems, say, if I run 2 Centos operating system instances in 2 VOSE?
Please help!
Thanks.

Licensing questions should be asked of a trained Microsoft licensing specialist. I haven't seen one of those lurking in this forum. www.microsoft.com/licensing.
That said, licenses are assigned to the physical host, not to VMs. The License you assign to the host grants you the "right to run" addition virtual operating system environments running Windows Server. It does not grant you additional licenses.
Licensing for Microsoft Windows Server operating system is controlled by Microsoft. Licensing for any other operating system is not covered by the virtualization rights of the Windows Server operating system. Therefore, if the CentOS virtual machines
are properly licensed by whoever licenses them, you can run however many instances that license allows.
A single Standard Edition license can be installed on the physical host granting you the right to run up to two virtual instances of Standard Edition. However, if you run additional services, such as file services or Active Directory or IIS, etc.,
on the physical instance, that means you can only run one additional virtual instance of Windows Server.
Free advice is worth every cent.
.:|:.:|:. tim

Windows Storage server 2012 Standard Licenseing

We have purchased 2 licenses of Windows Storage Server 2012 standard Edition for production. These 2 servers will be configured in cluster in production. Now we have to install one more server in failover in case the production servers goes down. My question
is do we need to purchase the license for the 3rd server as the same will be working as an DR for the production.

Hello,
yes, you need to purchase th ellicense for the third Server while Windows Server storage is licensed per instance(active or passive).
on th emicrosoft MSLT for Windows Server storage 2012 R2 Standard we hav the following info:
License Model: The software is licensed based on:
the number of instances of server software that you run; and
the number of processors in the physical hardware
Assignment of the License to the Server:
The software license is permanently assigned to the server with which you acquired the software. That server is the
licensed server for that particular license. A hardware partition or blade is considered to be a separate server. You may not assign the same license to more than one server.
thanks
diramoh

Windows Server 2012 Standard Black Parts Windows

Similar Messages

Maybe you are looking for