Windows Server 2012 Terminal Services (Client Side)

I would like to see the interface of the new Windows Server 2012 Terminal Session via RDP.  Reason being, is that users are resistant to change - and if there is no start button like in windows 8, that is a big concern when considering upgrading our
server to 2012.  Anyone know what it looks like?  Screenshots of being logged in as a user via RDP would be much appreciated!
Thanks

Hi,
Yes, there is a Start Button in Server 2012 R2:
You may download the preview and test if you like:
http://technet.microsoft.com/en-US/evalcenter/dn205286.aspx
-TP

Similar Messages

  • Unable to add network printers from Windows Server 2012 R2 to client running Windows 7 Pro x64

    New Windows Server 2012 R2 Standard in the environment.  Added print services to it and added five HP printers to it and shared them.  Also deployed the printers via group policy.
    Clients are running Windows 7 Pro x64.  The group policy fails to install the printers (error 0x00000002).  We get the same error when trying to manually add the printer from the client side.
    From Event Viewer: Group Policy was unable to add per computer connection <<printer share>>. Error code 0x2. This can occur if the name of the printer connection is incorrect, or if the print spooler cannot contact the print server.
    Any ideas on troubleshooting this?
    Thanks.
    -John

    John,
    You might try playing with the HP universal driver, that might help you.  Try installing a new shared printer on the server using the universal print driver, then try and connect to it to see if it is any better.
    Check these GPO settings to ensure local machines can install the drivers.
    1. Configure the following two Group Policy settings:
    Computer Configuration\Policies\Administrative Templates\System\Driver Installation\Allow non-administrators to install drivers for these devices setup classesEnabled
    2. Device class GUID of printers: {4d36e979-e325-11ce-bfc1-08002be10318}
    Computer Configuration/Policies/Administrative Templates/Printers/Point and Print RestrictionsEnabled
    Security Prompts: When Installing Drivers for a new connection = Do not show warning or elevation prompt
    This article might help you out also:
    http://www.eversity.nl/blog/2012/09/windows-cannot-connect-to-the-printer-operation-failed-with-error-0x00000002/
    Cheers,
    Curt Winter
    Certified Microsoft Professional
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied. If you found my post helpful, please mark it as the answer.

  • Windows Server 2012 - Direct Access clients and the Windows 8 firewall

    Hi,
    We're running a simple proof-of-concept for Server 2012 Direct Access, we have a single DA server behind a firewall using NAT. We have a number of client devices setup for DA and running Windows 8.
    Our issue is that we can only get the Windows 8 direct access clients to connect (when outside the corporate network) and work with the windows firewall disabled (public network profile). 
    With the windows firewall disabled everything works exactly as expected. When outside the corporate network the client detects the network state (public network profile), connects via DA and all internal resources can be accessed successfully...fantastic.
    Is there some specific guidance on manually configuring the windows 8 firewall for Direct Access ? We've tried the obvious TCP:443 with edge traversal enabled but without success.
    Much of the information we have found relates to UAG rather than Windows 2012 DA.
    Any assistance is appreciated.

    Hi,
    There isn’t any specific configuration on the firewall.
    Just confirm that port 443 can be forwarded to DirectAccess server.
    Of course, make sure you are using IPsec first.
    Check the links:
    STEP 6: Test DirectAccess Client Connectivity from Behind a NAT Device
    http://technet.microsoft.com/en-us/library/hh831524.aspx#TeredoCLIENT1
    DirectAccess for Windows Server 2012 Installation & Configuration Guide
    http://syscomlab.blog.com/2012/09/directaccess-for-windows-server-2012-guide/
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Windows server 2008 terminal service problem

    Dear Sir,
    could you please tell me how to input chinese characters which is using the Penpower application in a Windows server terminal services. I cannot input chinese even though I use the "Quick" input method. thank you for your kindly assistance.
    Michael 

    Hi Michael,
    Thank you for posting in Windows Server Forum.
    Are you using RemoteApp as your pen power application?
    If you want the session to use the default keyboard layout stored in the user profile instead of the layout provided by the Terminal Server client after the user logs on to the Terminal Server computer, you can set the IgnoreRemoteKeyboardLayout registry value
    to 1. After users first connect to the Terminal Server computer, configure the default keyboard layout and input language that you want, and then log off. All later user logons will use the default keyboard layout and input language from the profile.
    To do so, please perform the following steps: 
    1. On the terminal server, click Start, click Run, type regedit, and then click OK.
    2. Locate and then click the following registry subkey:
       HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Keyboard Layout
    3. On the Edit menu, click Add Value, and then add the following registry information:
    Value name: IgnoreRemoteKeyboardLayout
    Data type: REG_DWORD
    Value data: 1
    4. Quit Registry Editor.
    After you first connect to the Terminal Server computer, configure the default keyboard layout and input language that you want, and then log off. All later user logons will use the default keyboard layout and input language from the profile.
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Installing terminal server role on windows server 2012 to use for Windows server 2008 R2 machines.

    Dear
    Our current setup is as follows :-
    Active Driectory is in Windows Server 2003.
    Citrix Xenapp version 5.6 with all Xenapp servers in Windows Server 2003
    Now we are upgrading our Citrix farm to 6.5 and all Xen app servers into Windows Server 2008R2.
    We did the configuration and testing; everything works fine except the terminal server is not configured which gives the pop always for the expiry date.
    We do have license for 2012 terminal server which is not possible to downgrade for some reason and managent need to install new Windows Server 2012 for terminal server and activte the licenses.
    My question is :-
    1 Whether Windows Server 2008 R2 will get RDS cal license from Windows Server 2012 terminal server (RDS CAL license is of windows server 2012).
    2. What is the role and features I need to activate in Server 2012 in order to use for Citrix 6.5 (only applicable fetaure for getting the RDS cal license.) 
    3. Whether I can add this 2012 server into domain. Is it possible to add 2012 server into Windows Server 2003 AD. 
    Your early reply is highly appreciated.

    Thanks Jeremy..
    I got exactly the right answers I am lookoing for ..
    I successfully activated the terminal service on the newly created Windows 2012 Server and installed the retail license pack we had of 50+50+25 keys . It later shows the 125 keys successfully applied.
    when I tried to link the Xenapp (Windows Server2008R2) to the license server, it first gives me error that session host service role is not installed on the ternial server. So I installed that role also in the terminal server.
    But now its anothee error as below.
    RDS Cals are not available for this Remote Desktop Session host server, and licensing Diagnostic has identified licensing problems for the RD session host server.
    1. Is it wrong I did by installing session host server role into the terminal server (but really it gave me error like 'session host server role is not running on the license server' when I tried to link the license server).
    2. Is it the problem that Windows Server 2008 R2 will not get license from 2012 RDS CAL license.
    3. whether Clearing house will take time to update the license.
    Your reply is highly appreciated. I need to know whether any other way I can link the Windows Server  2008 R2 Servers (Xenapp) to the license server.

  • Windows Server 2012 GPO setting are not apply on windows Xp clients

    Hi
    I am create GPO on windows server 2012.  300 clients on domain are working fine, GPO setting apply on all windows 7, 8 clients. But 200 clients of windows XP are not working. GPO setting are not applies on XP. I am trying to Group Policy
    Preference Client Side Extensions for Windows XP (KB943729) on one window XP client, all GPO servers 2012 setting is working fine. But is not solution. I have 200 clients of windows XP, Please provide batter solution on one click command and apply all 200
    XP clients.
    Thanks.

    Dear,
    I have Windows server 2012 ,  i have install ADDS with Forest functional level 2008 & Domain functional level 2008 .
    I have applied GPO to particular OU, when i login to domain user on Windows 7 PC all GPO working fine but when i login on Windows Xp SP3 PC its not applied on XP. 
    I am facing issue on windows XP clients it is true. Please see this URL address:
    http://blogs.technet.com/b/grouppolicy/archive/2009/03/27/group-policy-preferences-not-applying-on-some-clients-client-side-extension-xmllite.aspx
    Please provide batter solution on one click command
    Thanks.

  • Issues With Backing up Server to USB HDD in Windows Server 2012 Essentials

    Hi,
    I have a few installs of Windows Server 2012 Essentials on clients sites and I have an issue where by the server will back up to the connected USB HDD for while but then will fail and the only way to make it backup again is to wipe the HDDs then setup server
    backup again.
    I get the following error in the Application Event viewer:
    The backup operation that started at '‎2014‎-‎01‎-‎16T05:00:12.595237100Z' has failed with following error code '0x80070020' (The process cannot access the file because it is being used by another process.). Please review the event details for a
    solution, and then rerun the backup operation once the issue is resolved.
    - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    - <System>
      <Provider Name="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}" />
      <EventID>517</EventID>
      <Version>1</Version>
      <Level>2</Level>
      <Task>0</Task>
      <Opcode>0</Opcode>
      <Keywords>0x8000000000000000</Keywords>
      <TimeCreated SystemTime="2014-01-16T05:05:12.199871300Z" />
      <EventRecordID>141805</EventRecordID>
      <Correlation />
      <Execution ProcessID="7204" ThreadID="12092" />
      <Channel>Application</Channel>
      <Computer>ServerName.Domain.local</Computer>
      <Security UserID="S-1-5-18" />
      </System>
    - <EventData>
      <Data Name="BackupTime">2014-01-16T05:00:12.595237100Z</Data>
      <Data Name="ErrorCode">0x80070020</Data>
      <Data Name="ErrorMessage">%%2147942432</Data>
      </EventData>
      </Event>
    Are there any best practices that I am missing while setting this up or this a known issue and what is the resolution?
    Best Regards,
    Abby_Doc

    Hi Abby_Doc,
    Regarding to this issue, generally some application is causing sharing violation on files. Then backup fails to access those files. Such as some
    Antivirus program and so on. Please temporarily disable antivirus program and monitor if this issue still persists.
    Meanwhile, you can perform a clean boot in Windows to eliminate software conflicts that occur when you backup.
    How to perform a clean boot in Windows
    http://support.microsoft.com/kb/929135/en-us
    In addition, the Process Monitor will help us to find out which file was actually locked. You can download from following link.
    http://technet.microsoft.com/en-us/sysinternals/bb896645
    Hope this helps.
    Best regards,
    Justin Gu

  • REMOTE DESKTOP SERVICES CLIENT ACCESS LICENSES FOR MICROSOFT WINDOWS SERVER 2012 STANDARD AND DATACENTER

    I am using a window 7 professional  service pack 1 and I purchase REMOTE DESKTOP SERVICES CLIENT ACCESS LICENSES FOR MICROSOFT WINDOWS SERVER 2012 STANDARD AND DATACENTER. but  the seller did not send me any installation CD or instruction
    on how to use it.
     Please how can I use it on my window 7 professional  service pack 1.
    Thank you.

    Though Bill is absolutely correct for most CALs, Remote Desktop Services does have its own special licensing server.  I haven't installed one on 2012, yet, but here is a step-by-step guide for 2008. 
    http://technet.microsoft.com/en-us/library/dd983943(v=ws.10).aspx
    Here is a lab guide for 2012 -
    http://technet.microsoft.com/en-us/library/jj134160.aspx
    But, the explanation of your environment begs the question - what are you trying to do?  You say you have a desktop OS and you are talking about Windows Server products.  In that light, your question does not make a lot of sense.
    . : | : . : | : . tim

  • Remote Desktop Services that require Native SQL Server Client in Windows Server 2012?

    I have somehow gotten really confused on this.. Is the Remote Desktop Connection Broker the only Remote Desktop Service that requires the SQL Native Client to be installed in Windows Server 2012 (r2) ?

    Hi,
    If you plan on configuring RDCB in HA mode then the SQL native client is required.  The other RDS role services do not require it.
    -TP
    Is High Availability Mode enabled by Default?

  • Windows Server 2012 Essentials (not R2) - all client computers offline

    The server is Windows Server 2012 Essentials (not R2). I have had this problem ever since I first installed the Windows Server 2012 Essentials server in the summer of 2013 (before R2 was released). The Windows Server 2012 Essentials server shows offline
    for all Devices under Dashboard. (Allow me to add that I just installed another site with Windows Server 2012 Essentials R2, and it was a breeze - all of the computers at the second install site are online.) I have one Windows 8.1 Pro client and the rest
    are Windows 7 Pro clients. The problem occurs on ALL client computers.
    I have removed computers from Devices in Dashboard on the server, rebooted the server, changed the client computer to a workgroup, rebooted the client computer, and reinstalled the connector software on the client computer. Same result. I
    have tried this on a Windows 7 Pro client and a Windows 8.1 Pro client with the same results.
    After running the connector on a client computer and waiting for the server to update its Devices status, if I look under Devices on the server Dashboard, the Windows 8.1 client computer will say online but within 24 hours it goes offline again. The
    Windows 7 client computers never show online. Both computers stay offline - they NEVER show an online status (referring to the status under Devices in Dashboard).
    I should make it clear that the clients can access the server shares with no problem. File synchronization works great. The clients can ping the server and the server can ping the clients. But client backups on the server fail.
    One of the most troublesome things about this problem is that it prevents the client computers from being accessed remotely using the website setup by Anywhere Access. I can login to get remote access to the shared files on the server, but
    the only computer that says "online" is the server. All of the other computers are "offline".
    The server and clients are only using Windows firewall. The clients all use Microsoft Security Essentials for their anti-virus.
    I used a troubleshooting tool that tells me that there are problems with port 6602 on the server, but the clients are all fine with port 6602. I know port 6602 is important for using Anywhere Access but I am still trying to find out more details on that.
    I have checked all of the firewall settings related to port 6602 on the server, and the firewall settings look like the standard Windows settings for this port. I used netstat to find the PID associated with the port, and I looked up the PID to find the service.
    That all looked standard, too.
    I have been working on this problem since the summer of 2013!! Does anyone have ANY suggestions?!!
    HELP!

    Hi,
    Just addition, please check if all necessary Windows updates are installed on those
    “Offline” client computer.
    When connect client computers to the Windows Server 2012 Essentials server by using the Connector software, there
    will be LAUNCHPAD on the client computer. Was this LAUNCHPAD grayed out? Please check if can access Shared Folders via this LAUNCHPAD. Meanwhile, please ping the Windows Server 2012 Essentials via IP address and server name when client computers show as
    Offline. Any find?
    Get Connected in Windows Server Essentials
    In addition, please follow the path on Server and client computer:
    %programdata%\Microsoft\Windows Server\Logs. Did you check any relevant Server-side logs and
    Client-side Logs if find more clues?
    Windows
    Server Essentials 2012/2012 R2 Log Files
    If any update, please feel free to let us know.
    Hope this helps.
    Best regards,
    Justin Gu
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Not working properly Computer Browser service in Windows Server 2012

    Good afternoon.
    Migrated from 2003 to 2012 Active Directory, all is good, but the service Computer Browser in Windows Server 2012 is not working properly.
    Online, there are several hundred computers, one network, no segments. PDC is the Master Browser, it is in my list of all the computers, but gives customers or Backup Browser computers only part, and in alphabetical order, giving the first 70 computers and
    all.
    Looked packet sniffer:
    Microsoft Windows Lanman Remote API Protocol 
    Entry Count: 70 
    Available Entries: 251
    So on Master Browser shows 251 computer, and the client 70.
    If disabled on Windows Server 2012 Service Computer Browser, Master Browser is a computer running Windows Server 2003. He gives all computers.
    What is the problem, how to get Windows Server 2012 to work correctly as a Master Browser?

    More info. I have high lighted in bold where the issue is. This is a massive headache for me at the moment
      Frame: Number = 377, Captured Frame Length = 182, MediaType = ETHERNET
    - Ethernet: Etype = Internet IP (IPv4),DestinationAddress:[00-13-72-52-6E-A1],SourceAddress:[00-1E-0B-2B-68-DD]
      - DestinationAddress: Dell Inc. 526EA1 [00-13-72-52-6E-A1]
         Rsv: (000000..)
         UL:  (......0.) Universally Administered Address
         IG:  (.......0) Individual address (unicast)
      - SourceAddress: 001E0B 2B68DD [00-1E-0B-2B-68-DD]
         Rsv: (000000..)
         UL:  (......0.) Universally Administered Address
         IG:  (.......0) Individual address (unicast)
        EthernetType: Internet IP (IPv4), 2048(0x800)
    - Ipv4: Src = 10.44.46.101, Dest = 10.44.44.14, Next Protocol = TCP, Packet ID = 14025, Total IP Length = 168
      - Versions: IPv4, Internet Protocol; Header Length = 20
         Version:      (0100....) IPv4, Internet Protocol
         HeaderLength: (....0101) 20 bytes (0x5)
      - DifferentiatedServicesField: DSCP: 0, ECN: 0
         DSCP: (000000..) Differentiated services codepoint 0
         ECT:  (......0.) ECN-Capable Transport not set
         CE:   (.......0) ECN-CE not set
        TotalLength: 168 (0xA8)
        Identification: 14025 (0x36C9)
      - FragmentFlags: 16384 (0x4000)
         Reserved: (0...............)
         DF:       (.1..............) Do not fragment
         MF:       (..0.............) This is the last fragment
         Offset:   (...0000000000000) 0
        TimeToLive: 128 (0x80)
        NextProtocol: TCP, 6(0x6)
        Checksum: 0 (0x0)
        SourceAddress: 10.44.46.101
        DestinationAddress: 10.44.44.14
    - Tcp: Flags=...AP..., SrcPort=65372, DstPort=NETBIOS Session Service(139), PayloadLen=128, Seq=1910965363 - 1910965491, Ack=580319796, Win=252 (scale factor 0x8) = 64512
        SrcPort: 65372
        DstPort: NETBIOS Session Service(139)
        SequenceNumber: 1910965363 (0x71E70473)
        AcknowledgementNumber: 580319796 (0x2296FA34)
      - DataOffset: 80 (0x50)
         DataOffset: (0101....) 20 bytes
         Reserved:   (....000.)
         NS:         (.......0) Nonce Sum not significant
      - Flags: ...AP...
         CWR:    (0.......) CWR not significant
         ECE:    (.0......) ECN-Echo not significant
         Urgent: (..0.....) Not Urgent Data
         Ack:    (...1....) Acknowledgement field significant
         Push:   (....1...) Push Function
         Reset:  (.....0..) No Reset
         Syn:    (......0.) Not Synchronize sequence numbers
         Fin:    (.......0) Not End of data
        Window: 252 (scale factor 0x8) = 64512
        Checksum: 0x6F65, Disregarded
        UrgentPointer: 0 (0x0)
        TCPPayload: SourcePort = 65372, DestinationPort = 139
    - Nbtss: SESSION MESSAGE, Length =124
        PacketType: SESSION MESSAGE, 0(0x00)
      - Flags: Add 0 to Length
         Reserved: (0000000.)
         Extension: (.......0)Add 0 to Length
        Length: 124(0x7C)
    - SMB: C; Transaction, Remote Administration Protocol, FileName = \PIPE\LANMAN
        Protocol: SMB
        Command: Transaction 37(0x25)
      - NTStatus: 0x0, Facility = FACILITY_SYSTEM, Severity = STATUS_SEVERITY_SUCCESS, Code = (0) STATUS_SUCCESS
         Code:     (................0000000000000000) (0) STATUS_SUCCESS
         Facility: (...0000000000000................) FACILITY_SYSTEM
         Customer: (..0.............................) NOT Customer Defined
         Severity: (00..............................) STATUS_SEVERITY_SUCCESS
      - SMBHeader: Command, TID: 0x2001, PID: 0x276C, UID: 0x3801, MID: 0x0140
       - Flags: 24 (0x18)
          LockAndRead:     (.......0) LOCK_AND_READ and WRITE_AND_UNLOCK NOT supported (Obsolete) (SMB_FLAGS_LOCK_AND_READ_OK)
          NoAck:           (......0.) An ACK response is needed (SMB_FLAGS_SEND_NO_ACK[only applicable when SMB transport is NetBIOS over IPX])
          Reserved_bit2:   (.....0..) Reserved (Must Be Zero)
          CaseInsensitive: (....1...) SMB paths are case-insensitive (SMB_FLAGS_CASE_INSENSITIVE)
          Canonicalized:   (...1....) Canonicalized File and pathnames (Obsolete) (SMB_FLAGS_CANONICALIZED_PATHS)
          Oplock:          (..0.....) Oplocks NOT supported for OPEN, CREATE & CREATE_NEW (Obsolete) (SMB_FLAGS_OPLOCK)
          OplockNotify:    (.0......) Notifications NOT supported for OPEN, CREATE & CREATE_NEW (Obsolete) (SMB_FLAGS_OPLOCK_NOTIFY_ANY)
          FromServer:      (0.......) Command - SMB is being sent from the client (SMB_FLAGS_SERVER_TO_REDIR)
       - Flags2: 51207 (0xC807)
          KnowsLongFiles:            (...............1) Understands Long File Names (SMB_FLAGS2_KNOWS_LONG_NAMES)
          KnowsEas:                  (..............1.) Understands extended attributes (SMB_FLAGS2_KNOWS_EAS)
          SmbSecuritySignature:      (.............1..) Security signatures enabled (SMB_FLAGS2_SMB_SECURITY_SIGNATURE)
          Compressed:                (............0...) Compression Disabled for REQ_NT_WRITE_ANDX and RESP_READ_ANDX (SMB_FLAGS2_COMPRESSED)
          SecuritySignatureRequired: (...........0....) Security Signatures are NOT required (SMB_FLAGS2_SMB_SECURITY_SIGNATURE_REQUIRED)
          Reserved_bit5:             (..........0.....) Reserved (Must Be Zero)
          IsLongName:                (.........0......) DO NOT use Long File Names (SMB_FLAGS2_IS_LONG_NAME)
          Reserved_bits7_9:          (......000.......) Reserved (Must Be Zero)
          ReparsePath:               (.....0..........) NOT a Reparse path (SMB_FLAGS2_REPARSE_PATH)
          ExtendedSecurity:          (....1...........) Aware of extended security (SMB_FLAGS2_EXTENDED_SECURITY)
          Dfs:                       (...0............) NO DFS namespace (SMB_FLAGS2_DFS)
          Paging:                    (..0.............) Read operation will NOT be permitted unless user has permission (NO Paging IO) (SMB_FLAGS2_PAGING_IO)
          NTStatus:                  (.1..............) Using 32-bit NT status error codes (SMB_FLAGS2_NT_STATUS)
          Unicode:                   (1...............) Using UNICODE strings (SMB_FLAGS2_UNICODE)
         PIDHigh: 0 (0x0)
         SecuritySignature: 0x0
         Unused: 0 (0x0)
         TreeID: 8193 (0x2001)
         ProcessID: 10092 (0x276C)
         UserID: 14337 (0x3801)
         MultiplexID: 320 (0x140)
      - CTransaction:
         WordCount: 14 (0xE)
         TotalParameterCount: 32 (0x20)
         TotalDataCount: 0 (0x0)
         MaxParameterCount: 8 (0x8)
         MaxDataCount: 4200 (0x1068)
         MaxSetupCount: 0 (0x0)
         Reserved: 0 (0x0)
       - Flags: Do NOT disconnect TID
          Disconnect: (...............0) Do NOT disconnect TID
          NoResponse: (..............0.) Server response to the client
          Reserved:   (00000000000000..) Reserved
         Timeout: 5000 milli sec(s)
         Reserved2: 0 (0x0)
         ParameterCount: 32 (0x20)
         ParameterOffset: 92 (0x5C)
         DataCount: 0 (0x0)
         DataOffset: 0 (0x0)
         SetupCount: 0 (0x0)
         Reserved3: 0 (0x0)
         ByteCount: 61 (0x3D)
       - RemoteAPIBuffer:
        - FileName: \PIPE\LANMAN
         - Align: 1 Bytes
            AlignBytes: Binary Large Object (1 Bytes)
           Name: \PIPE\LANMAN
          Pad1: Binary Large Object (2 Bytes)
    - RAPRequest: NetServerEnum2 Request, InfoLevel = 1, SV_TYPE_ALL: All in NSNET
        RAPOpcode: NetServerEnum2
      - ParameterDescriptor: WrLehDz; 4 send, 1 receive parameter
         Param: (W) WORD (send parameter, 16 bit integer)
         Param: (r) Receive buffer (format in data descriptor) (receive data, 0 bit integer)
         Param: (L) Receive buffer length (send/receive parameter, 16/16 bit integer)
         Param: (e) Entries read (receive data, 0 bit integer)
         Param: (h) WORD (receive parameter, 16 bit integer)
         Param: (D) DWORD (send parameter, 32 bit integer)
         Param: (z) ASCIIZ (send parameter, 8 bit integer)
         Param: ASCII NUL (string terminator)
      - DataDescriptor: B16BBDz; data bytes send: 0, receive: 34
       - Datum: (B) BYTE[16] (receive data, 8 bit integer)
          Datum: (B) BYTE (receive data, 8 bit integer)
          Digit: 1
          Digit: 6
         Datum: (B) BYTE (receive data, 8 bit integer)
         Datum: (B) BYTE (receive data, 8 bit integer)
         Datum: (D) DWORD (receive data, 32 bit integer)
         Datum: (z) ASCIIZ* (receive data offset, 32 bit integer)
         Datum: ASCII NUL (string terminator)
      - NetServerEnum2: SV_TYPE_ALL: All in NSNET
         InfoLevel: (1) SERVER_INFO_1
         ReceiveBufferSize: 4200 (0x1068)
       - ServerType: SV_TYPE_ALL: All
          Workstation:      (...............................1) All workstations
          Server:           (..............................1.) All computers with the server service running
          Sqlserver:        (.............................1..) All running Microsoft SQL Server
          DomainCtrl:       (............................1...) All primary domain controllers
          DomainBakctrl:    (...........................1....) All backup domain controllers
          TimeSource:       (..........................1.....) All Time servers
          AFP:              (.........................1......) All Apple File Protocol servers
          Novell:           (........................1.......) All Novell servers
          DomainMember:     (.......................1........) All LAN Manager 2.x domain members
          PrintqServer:     (......................1.........) All print servers
          DialinServer:     (.....................1..........) All dial-in servers
          ServerUnix:       (....................1...........) All Unix/Xenix servers
          NT:               (...................1............) All Windows NT workstations or servers
          WFW:              (..................1.............) All Windows for Workgroups servers
          ServerMFPN:       (.................1..............) All Microsoft File and Print for NetWare servers
          ServerNT:         (................1...............) All non-domain controller servers
          PotentialBrowser: (...............1................) All servers that can run the browser service
          BackupBrowser:    (..............1.................) All backup browsers
          MasterBrowser:    (.............1..................) All master browsers
          DomainMaster:     (............1...................)  All domain master browsers
          Reserved1:        (..........11....................)
          Windows:          (.........1......................) All Windows 95 or later
          DFS:              (........1.......................) All DFS root servers
          ClusterNT:        (.......1........................) All NT Clusters
          Terminalserver:   (......1.........................) All Terminal Servers
          ClusterVSNT:      (.....1..........................) All NT Cluster Virtual Server Names
          DCE:              (....1...........................) AllIBM DSS (Directory & Security Services)
          Reserved2:        (...1............................)
          AlternateXport:   (..1.............................) Return list for alternate transport
          LocalListOnly:    (.1..............................) Return local list only
          DomainEnum:       (1...............................) Enumerate primary domain
         Domain: NSNET
    Then the reply;
        Frame: Number = 378, Captured Frame Length = 1514, MediaType = ETHERNET
    + Ethernet: Etype = Internet IP (IPv4),DestinationAddress:[00-1E-0B-2B-68-DD],SourceAddress:[00-13-72-52-6E-A1]
    + Ipv4: Src = 10.44.44.14, Dest = 10.44.46.101, Next Protocol = TCP, Packet ID = 27036, Total IP Length = 1500
    + Tcp: Flags=...A...., SrcPort=NETBIOS Session Service(139), DstPort=65372, PayloadLen=1460, Seq=580319796 - 580321256, Ack=1910965491, Win=253 (scale factor 0x8) = 64768
    + Nbtss: SESSION MESSAGE, Length =2013
    + SMB: R; Transaction, Remote Administration Protocol
    - RAPResponse: NetServerEnum2 Response, Count = 31
        Win32ErrorCode: 0x00000000 - ERROR_SUCCESS - The operation completed successfully.
        Converter: 2251 (0x8CB)
      - NetServerEnum2: Count = 31
         EntriesReturned: 31 (0x1F)
         EntriesAvailable: 31 (0x1F)
       + NetServerInfo1: APOLLO
       + NetServerInfo1: ARTEMIS
       + NetServerInfo1: ASKLEPIOS
       + NetServerInfo1: CASTOR
       + NetServerInfo1: DCC4503-131L
       + NetServerInfo1: DCC4503-155L
       + NetServerInfo1: DCC4503-157L
       + NetServerInfo1: DCC4503-161L
       + NetServerInfo1: DCC4503-171L
       + NetServerInfo1: DCC4503-172L
       + NetServerInfo1: DCC4503-175L
       + NetServerInfo1: DCC4503-177L
       + NetServerInfo1: DCC4503-183L
       + NetServerInfo1: DCC4503-184L
       + NetServerInfo1: DCC4503-185L
       + NetServerInfo1: DCC4503-188L
       + NetServerInfo1: DCC4503-196L
       + NetServerInfo1: DCC4503-197L
       + NetServerInfo1: DCC4503-199L
       + NetServerInfo1: DCC4503-202L
       + NetServerInfo1: DCC4503-203L
       + NetServerInfo1: DCC4503-205L
       + NetServerInfo1: DCC4503-210L
       + NetServerInfo1: DCC4503-213L
       + NetServerInfo1: DCC4503-219L
       + NetServerInfo1: DCC4503-220L
       + NetServerInfo1: DCC4503-228L
       + NetServerInfo1: DCC4503-233L
       + NetServerInfo1: DCC4503-234L
       + NetServerInfo1: DCC4503-236L
       + NetServerInfo1: DCC4503-241L
        StringData: Binary Large Object (586 Bytes)

  • DirectAccess Client not connecting without error code on Windows Server 2012 R2 and Windows 8.1

    Hello,
    we are currently migrating from Windows Server 2012 to 2012 R2 and are not able to get the new Direct Access Service up and running. Our goal is to establish DirectAccess connection for a handful of clients using the IPHTTPS-adapter on the default port 443.
    Errors:
    There is actually no error showing up. It seems the infrastructure tunnel cannot be created but none of the IPv6-transition adapters is connecting (teredo and 6-to-4 are down) and the IPHTTPs adapter gives no informations about a problem:
    >Get-DAConnectionStatus
    Status    : Error
    Substatus : CouldNotContactDirectAccessServer
    >Get-NetIPHttpsState
    LastErrorCode   : 0x0
    InterfaceStatus : Failed to connect to the IPHTTPS server; waiting to reconnect
    Setup:
    Our setup is a virtualized Windows Server 2012 R2 Standard running on Hyper-V. It is located behind a NAT having the Port 443 mapped to the server. The only role installed after the basic install is RRAS including DirectAccess and VPN. The assistants completed
    successfully (running the configuration for DirectAccess and VPN). Operation Status says everything is green und working (for multiple days in the meanwhile). A previous direct access installation (on a different machine running Windows Server 2012) has
    been removed before installing the new server. The new installation is using a different router, so this might also be the cause of a problem.
    The client is a Windows 8.1 notebook located outside the company network accessing the internet through another NAT-device. The client has been able to connect to the previous DirectAccess setup but has never been able to establish a connection after the
    setup of the new Direct Access server. The device has no outbound constraints concerning the NAT-device and is only running the integrated Windows Firewall.
    Diagnosis:
    So far I've done some basic DNS and connectivity checks. The DNS-name can be resolved correctly and the router even responds to pings. The port forward is working and HTTPs connections are generally possible (temporarily routed the port to
    access the NLS-Website located on the server, which worked fine).
    Network monitor shows that both computers are communicating, traffic on the expected Port 443 is incoming on the server and responses from the server reach the client.
    Opening the IPHTTPs-url and in an endless page load. Sometime the browser page closes but I've never seen any result. Using telnet on the port shows that the server is accepting connections. I've even build a small test application that does a GET-Request
    on the URL returning HTTP-200 and no content.
    I'm currently running out of ideas what to do and since no error occurs this is kind of a bit frustrating. Any help appreciated.
    Regards
    Matthias

    Hi,
    In addition, have you disabled the DA client components on the DA client? If no, please also check
    the settings on the Name Resolution Policy Table.
    More information:
    DirectAccess
    Client Location Awareness – NRPT Name Resolution
    In addition, error 0x4C9 means the remote computer refused the network connection. It may be due to the invalid
    registry or corrupt drivers. For more detailed information, please refer to the link below:
    Error 1225 - Error Code 0x4C9
    Note:
    Microsoft is providing this information as a convenience to you. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
    Best regards,
    Susie

  • Office 2013 + Terminal Server Environment + Windows Server 2012 R2

    - Problems with Office 2013 (excel & Word) when use Roaming Profile (By Citrix) and folder redirection.
    Environment:
    2 x Windows Server 2012 R2 with Terminal Services installed and Office 2013 Professional Plus. Also this server are memeber of environment of Citrix XenDesktop 7.1
    Problem:
    In two servers I have installed Office 2013 Proffesional Plus and I have try to access to excel by Citrix.
    When I open excel with roaming profile (by citrix) activated, when I began to write I get a pop-up with the message:
    "Microsoft Excel cannot open or save any more documents because there is not enough available memory or disk space"
    And when I try to save the document I get the same message, and excel "crash" and closed.
    If I stop the roaming profile service. All works properly.
    The tests that I had made were:
    - Change DCOM config with correct permission.
    - Repair Office 2013 Installation.
    - Disable Protected Mode.
    Anybody could help me???
    Thanks in advance !!!

    Just searched a littler bit on this, below links might be helpful:
    http://howtoconfig.org/windows/excel-not-enough-available-memory-or-disk-space-available/
    http://social.technet.microsoft.com/Forums/office/en-US/2c753037-4600-4a4f-abd7-d228e2f20a38/2146827284microsoft-excel-cannot-open-or-save-any-more-documents-because-there-is-not-enough?forum=officesetupdeployprevious
    http://kb.jetreports.com/article/AA-00914/0/Microsoft-Excel-cannot-open-or-save-any-more-documents.html
    Go to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders  and modify the key Cache with a valid path (ie: C:\Windows\Temp ).
    Hope this helps.

  • Is there a way to change the Windows Update service startup type on Windows Server 2012 R2?

    We have a number of newly built 2012 R2 servers that we have HP Operations Manager agent running on that monitors the status of several services and reports if they are "stopped". One of these services is Windows Update. Every day we
    get at least one alert saying:
    "Service "Windows Update" is not started. Current state is stopped"
    Checking the event logs shows that the Windows Update service stops, then a while later it just starts again. Not an error, just an information event.
    In Windows 2012 R2 the Windows Update service is set to "Automatic (Trigger Start)", where in previous versions we run (2012/2008R2) it would be set to just "Automatic" or "Automatic (Delayed Start)"
    I have come to understand that this behaviour is normal for Windows 2012 R2, and that Trigger Start services by design stop themselves after a period of inactivity. I was unable to find any info on how this works. Our client would like this to
    be changed and the Windows Update service stay running all the time, understanding that this impacts performance.
    Is there a way to change the Windows Update service in Server 2012 R2 to the old Automatic startup behaviour so that it stays running all the time instead of stopping and starting periodicall? There is no option to do this via the services mmc
    gui.
    So far I have tried:
    Removing the Triggers using the command: sc triggerinfo wuauserv delete
    This works temporarily, the service then shows as just Automatic in the services console, however if you restart the server or restart the service it goes right back to being Automatic (Trigger Start).
    Any kind of help would be appreciated.

    This one might help.
    Allow configuration of Automatic Updates in Windows 8 and Windows Server 2012
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Windows Server 2012 Standard - HP OfficeJet Pro 8600 Plus printer not working after promoting to Domain Controller / AD Services

    An associate and myself installed the built-in drivers for the HP OfficeJet Pro 8600 Plus multi-function (network) printer on a Windows Server 2012 Standard server installation and everything worked fine whenever I want to print anything directly from the
    Windows Server machine (there's a reason for this, so please understand that ;)  ).
    We were able to print without any problems from the Windows Server 2012 machine, using the drivers from Microsoft.  Mainly, because HP has not listed any specific support for Windows Server 2012, only Windows Server 2008 R2, however, the drivers that
    came with Windows 2012 seem to work very well.
    PROBLEM: I later had to promote the Windows Server 2012 to a Domain Controller, and created the Active Directory configurations, even enabled the Print Services.  After doing all of that, the HP printer will not print anything.  It's like all print
    requests directly from the Windows Server go to Nil.
    Has anyone encountered a problem like this before? The only thing I can think of is that after perhaps something affected printing directly once we promoted the server to being a DC, and added other features / roles.  I even tried installing the
    HP drivers for Windows Server 2008 R2, and the results are still the same...nothing prints.  Trust me, the printer is set as the Default Printer and even when choosing to print, we make sure the HP OfficeJet Pro is selected, and is on, as other Windows
    Client PC's can print to it directly.
    Does anyone have any suggestions we could try?  Thanks in advance.

    While it is quite a while since this was posted - I can concur a similar issue exists.
    We have spent the better part of a day trying to work out why other HP printers work fine but our 8620 prints are not printing and going to Nil.  The print server is hosted on a shared DC.  Comparing to the initial posters details, for some reason
    it seems to be most commonly related to the OfficeJet Pro 8600/8610/8620/8630 series printers.
    I ended up doing a print server migration from the domain controller to stand alone host and all printers now work from a single server rather than a mix.  Domain controller OSes varied from 2008, 2012, 2012 R2 (tested with multiple) and only after
    all of those failed then tried a stand alone server os machine as a last resort which worked fine.  Printing directly from Win 7 / 8 /8.1 clients to the IP always worked.

Maybe you are looking for

  • Performance issue with a PI System

    Hello I am currently doing my Master Thesis, which is about a Software Experiment comparing performance between two "architectures" in SAP. However, I am getting some unexplained pauses in the PI system, which I don't understand. I am not sure, wheth

  • Convert URL from integration engine to adapter engine with https

    I'm still relatively new at PI, trying to learn as I go, so I apologize if I do not phrase this correctly.  Our trading partners currently post xml files via http to a url directed to our Integration Engine, for example:  http://<host>:<port>/sap/xi/

  • Error installing/patching 9.2.0.4 Opatch(10.1.0.2)

    Hi I have download the latest OPatch(10.1.0.2) to apply the patch p3119415_9204_LINUX.zip on Oracle 9i, but when running opatch(opatch apply) I am getting this error: Can't call method "build_option_details" on an undefined value at /ORA/app/oracle/p

  • Can i get Angry Birds for a Java phone

    Angry birds is the game now, played it on google chrome browser and enjoyed it. I have seen it on my Andriod, Symbian and Iphones but i got a Java phone (SE K610i). Any link will be greatly appreciated. 

  • Removing blue border from rollover image in cs6

    Have 14 sliced images. But only the images created for rollover have the blue border when I reveiw in the browser. Not sure how to remove them in Dreamweaver CS6 Message was edited by: MrBotis