Windows Server 2012r2 Failover Cluster Event Trace Log files

Hi
The only documentation I can find regarding event trace log files (Diagnostic.etl.*) for Failover Clustering relate to Server 2008/2008r2, which state that the etl files should be in C:\Windows\System32\winevt\Logs.
I have been exploring a clustering lab for Server 2012r2 and cannot find these files in that folder.
Strangely the PS cmdlet Get-ClusterLog still works!
Where are the etl files?
TIA

Hi,
Please check if the log is available in C:\ProgramData\Microsoft\Windows\WER\ReportQueue\.
If not, you can use Get-ClusterLog with the Destination parameter to get the log file.
Destination
Specifies the location to copy the cluster log(s) to. To copy to the current folder use "-Destination ." for this parameter.
http://technet.microsoft.com/en-us/library/ee461045.aspx
Thanks.
Jeremy Wu
TechNet Community Support

Similar Messages

Windows Server 2012R2 Failover Cluster error with mounted volumes

Hi all,
I've a problem with mounted volume on a WSFC build on top of Windows Server 2012R2, the situation is:
M: is the volume hosting mounting points
disk-1, disk-2, disk-3 are volume mounted on M:\SomeFolder
Theese volumes are used by a SQL Server Failover Cluster Instance, but my problem is related to WSFC. I've set dependencies so disk-1, disk-2, disk-3 depend upon H:
If I try a failover of the role "SQL Server" I observe that when the disk come online in the other node they fail with this error:
Cluster resource 'disk-1' of type 'Physical Disk' in clustered role 'SQL Server (ISQL2014A)' failed. The error code was '0xaa' ('The requested resource is in use.').
Based on the failure policies for the resource and role, the cluster service may try to bring the resource online on this node or move the group to another node of the cluster and then restart it. Check the resource and group state using Failover Cluster
Manager or the Get-ClusterResource Windows PowerShell cmdlet.
If I manually take offline H: and than bring it online and then manually take online all disk (1 to 3) they come online with no error.
I'm going crazy!

I've found the root of the problem: the servers are virtual machine on a VMware ESX 5.5 infrastructure, VMware claims that on 5.5 multipath is supported for raw device mapping disks but disabling multipath (I've set to fixed path) the Windows Server Failover
Cluster stops to get problems.
Now we have opened a support call with VMware.

Windows Server 2012 Failover Cluster (Hyper-V) Event Id 1196

Hi All,
I just installed Failover Cluster for Hyper-V on windows server 2012 with 2 nodes. I got following error event id 1196.
reCreated / deleted Cluster Host A record on DNS and nothing happened.
Any suggestion?
There is similar topic but it couldnt help
http://social.technet.microsoft.com/Forums/en-US/winserverClustering/thread/2ad0afaf-8d86-4f16-b748-49bf9ac447a3/
Regards

Hi,
You may refer to this article to troubleshoot this issue;
Event ID 1196 — Network Name Resource Availability
http://technet.microsoft.com/en-us/library/dd354022(v=WS.10).aspx
Check the following:
Check that on the DNS server, the record for the Network Name resource still exists. If the record was accidentally deleted, or was scavenged by the DNS server, create it again, or arrange to have a network administrator create it.
Ensure that a valid, accessible DNS server has been specified for the indicated network adapter or adapters in the cluster.
Check the system event log for Netlogon or DNS events that occurred near the time of the failover cluster event. Troubleshooting these events might solve the problem that prevented the clustered Network Name resource from registering the DNS name.
For more information please refer to following MS articles:
DNS Registration with the Network Name Resource
http://blogs.msdn.com/b/clustering/archive/2009/07/17/9836756.aspx
Lawrence
TechNet Community Support

Windows server 2012 failover cluster error: Cluster resource 'Virtual Machine Configuration ... of type 'Virtual machine configuration in clustered role ... failed.

I have two windows 2012 host server that are clustered using windows failover cluster feature. Each server is hosting four VMs. When migrating from Host2 to Host1, the migration failed with the following error:
Cluster resource 'Virtual Machine Configuration SCPCSQLSRV01' of type 'Virtual Machine Configuration' in clustered role 'SCPCSQLSRV01' failed. The error code was '0x569' ('Logon failure: the user has not been granted the requested logon type at this computer.').
When this happens, the VM that I was migrating can no longer be started even on the original host. The only remedy is to restart the host server.
Any suggestion on resolving this problem?
Thanks
Ikad

Thanks. The article referred to above gives the solution to my issue. There is a group policy that is applied to the OU where the host servers were placed. Doing gpupdate /force temporarily removes the problem. Unfortunately the NT Virtual Machine\Virtual
Machines account is a special account that cannot be added like other accounts and granted the log on as a service right. The thread
http://social.technet.microsoft.com/Forums/en-US/winserverhyperv/thread/d56f2eae-726e-409a-8813-670a406593e8 contains how it can be added which is by creating a group and running the command
Net localgroup VMTest “NT Virtual Machine\Virtual Machines” /add
to add it to a local group VMTest. VMTest is then assigned the right to log on as a service.
Ikad

Windows Server 2008 failover cluster in VirtualBox

Hi,
I'm a Windows NT student and I need help with understanding how to do clustering using multiple Windows 2008 R2 Enterprise servers in VirtualBox 4.3.8. I have a Windows 7 host computer. I was wondering if someone could provide clearly detailed step-by-step
directions (ex. Click this, then click that) on what I need to do prior to clustering, as well as starting the clustering process. Please ask if you need additional information.
Thank You.

I'm sorry. I'm such a noob. Should I have 3 virtual machines, where one is the domain controller and the other 2 are nodes? Or is it ok to just have 2 virtual machines?
It's optional. You just need your both cluster nodes (VMs) belong to the same domain. It can be own domain serviced by your private VM or it can be "external" one. See:
Using Guest Clustering for High Availability
http://technet.microsoft.com/en-us/library/dn440540.aspx
Active Directory domain requirements
Failover clusters require that nodes of the same cluster are members of the same Active Directory domain. However, there is no requirement that a guest cluster belongs to the same Active Directory
domain as the physical hosts on which the virtual machines are running.
Also you'll need some shared storage. See (same URL as above):
Storage options
The following tables lists the storage types that you can use to provide shared storage for a guest cluster.
Storage Type
Description
Shared virtual hard disk
New in Windows Server 2012 R2, you can configure multiple virtual machines to connect to and use a single virtual hard disk (.vhdx) file. Each virtual machine can access the virtual hard disk
just like servers would connect to the same LUN in a storage area network (SAN). For more information, see Deploy a Guest Cluster Using a Shared Virtual
Hard Disk.
Virtual Fibre Channel
Introduced in Windows Server 2012, virtual Fibre Channel enables you to connect virtual machines to LUNs on a Fibre Channel SAN. For more information, see Hyper-V
Virtual Fibre Channel Overview.
iSCSI
The iSCSI initiator inside a virtual machine enables you to connect over the network to an iSCSI target. For more information, see iSCSI
Target Block Storage Overview and the blog post Introduction of iSCSI Target
in Windows Server 2012.
Shared VHDX is out as you don't have proper software (Windows 7 is not supported as a host and Windows 2008 R2 does not support shared VHDX as a guest), virtual Fibre Channel is out as you again don't have Windows Server 2012 R2 (and don't have any FC gear).
So iSCSI is your only choice. Either spawn dedicated Windows (or other OS if you like UNIX) VM with iSCSI stack or use third-party Windows software running on your host. Windows Server 2008 R2 does not have iSCSI target embedded so you can get it here:
MSFT iSCSI Target 3.3 Download
http://www.microsoft.com/en-us/download/details.aspx?id=19867
Good luck and happy clustering :)
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

Failover Cluster events through email

Team,
I'm trying to get Windows Server 2008 Failover clustering events through email. I don't see "Attach a task" option in Clustering events.
Could anybody suggest how to accomplish it. Please note down we have a 4 node cluster and would like to run the script on remote computer.
Thanks

Hi Reddy, this forum is not for writing scripts. Please request in this
link
You can try help like shown below
help Send-MailMessage -Detailed
help Get-EventLog -Detailed
help Get-WinEvent -Detailed
If you need further help post here
Regards Chen V [MCTS SharePoint 2010]
Hi Chen, It seems to be you misunderstood my question. I was looking for Attach a task" option in Clustering events. Do you see this option in clustering events? You can see the same in event viewer but not in clustering events

Does the cluster have a log file?

          I understand each server in a cluster has a log file, but does the cluster itself have a log file?


          I dont think there is one for cluster...
          "Jake Kroto" <[email protected]> wrote:
          >
          >I understand each server in a cluster has a log file, but does the cluster itself have a log file?

Lync 2013 Publish Topology Failed in window server 2012R2

Scenario
Lync Enterprise Edition!
Windows Server 2012R2 - LyncServer 2013
WIndows Server 2008R2 - Sql 2008 R2 Failover Cluster (Multiple Database and Instances Created) 5 Others Application Database also Created which has been used.
DNS Entries
HOst Name :
LYNCFE.consoto.com
Pool.consoto.com (Host Name Created Same IP as Lync Frontend Server)
dialin.consoto.com
meet.consoto.com
admin.consoto.com
DBLYNC.consoto.com
Virtual Instant Name of Sql Database and Instance name : DBLYNC\Lynccore
Permission Rights:
I am using the Administrator account for Lync 2013 Installation.
Domain Administrator Account Member to CSAdministrator group and RTC Universal Server admin group.
SQL sysadmin Account member Sqladmin and Domain administrator User.
ShareFolder-Lyncshare on Storage.consoto.com
Permission:
Everyone Read-write
RTCComponentUniversalServices Read-write
RTCHSUniversalServices Read-write
RTCUniversalServerAdmins Read-write
RTCUniversalConfigReplicator Read-write
Virtual Computer Name DBLYNC$ Full control
Issue : I have create one topology and try to publish but getting error.Log Detail Below
Feature: CentralMgmtStore
SQL Instance: domain-name.com\lynccore
Collocated: False
Found "RTCUniversalServerAdmins": True
Found "RTCUniversalConfigReplicator": True
Found "RTCUniversalReadOnlyAdmins": True
TaskFailed: Task execution failed.
Error:The network name cannot be found.
▼ Details
└ Type: IOException
└ ▼ Stack Trace
└ at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.Directory.InternalCreateDirectory(String fullPath, String path, Object dirSecurityObj, Boolean checkHost)
at System.IO.Directory.InternalCreateDirectoryHelper(String path, Boolean checkHost)
at Microsoft.Rtc.Common.Data.DatabaseManager.CreateDatabase(String dbFileBase, String dbPath, String logPath, Int32 dbSizeMB,
Int32 logSizeMB, Int32 dbGrowthMB, Int32 logGrowthMB, Int32 maxDbSizeMB, Int32 maxLogSizeMB)
at Microsoft.Rtc.Common.Data.DatabaseManager.CleanInstallDatabase(String dbFileBase, String initialScripfilePath, String
dbPath, String logPath, Int32 dbSizeMB, Int32 logSizeMB, Int32 dbGrowthMB, Int32 logGrowthMB, Int32 maxDbSizeMB, Int32
maxLogSizeMB)
at Microsoft.Rtc.Common.Data.DbSetupBase.CleanInstallDatabase()
at Microsoft.Rtc.Common.Data.DbSetupBase.CreateOrUpdateDatabase()
at Microsoft.Rtc.Common.Data.XdsDatabase.CreateOrUpdateDatabase()
at Microsoft.Rtc.Management.Deployment.Tasks.DatabaseCreator.CreateDatabaseForFeature(String featureName, Boolean clean,
Boolean update, String sqlServer, String instanceName, Boolean collocated, Boolean backup, Boolean noreindex,
DatabasePathAssignment[] pathAssignments, Boolean broadCast, String& logfile)
at Microsoft.Rtc.Management.Deployment.installdatabaseCmdlet.CreateDatabaseForFeature(Planitem i)
at Microsoft.Rtc.Management.Internal.Utilities.LogWriter.InvokeAndLog[T](Action`1 action,T arg)
TaskFailed: An error occurred while creating or updating the database for feature CentralMgmtStore. For details, see the log
file ‘C:\Users\Administrator\AppData\Local\Temp\2\Create-CentralMgmtStore-domain-name.com_lynccore-[2014_07_09]
[11_40_46].log’
TaskFailedResolution: Consult exception information and previous errors for more information on how to resolve this error.
Error: An error occurred: "System.IO.FileNotFoundException" "The network name cannot be found"


SQL Scenario
Windows Server 2008R2 - Sql 2008 R2 Failover Cluster (Multiple Database and Instances Created) 5 Others Application Database
also Created on the Failover Cluster.
Failover SQL Cluster
Active
Passive
Computer Name: Cluster1.Consoto.com
Computer Name : Cluster2.Consoto.com
ping cluster1.consoto.com reply IP 192.168.0.30 from Lync FE
ping cluster2.consoto.com reply IP 192.168.0.31 from Lync FE
SQL Database DBLYNC IP is 192.168.0.40 and also reply from Lync Server

Windows Server 2012R2 disks go offline after reboot

Hi all,
I've a strange issue in my brand new Windows Server 2012R2, let's describe the environment:
Hypervisor = VMware ESX 5.5
Guest OS = Windows 2012 R2 Standard Edition
I've configured the guest OS with several disk for a SQL Server installation, each disk are presented as "pure" virtual disk to Windows that means no RDM (pass through disk).
After a reboot I've discovered that SQL Server has failed to come online, on a brief analisys, all the disks except system drive (C:) and a volume dedicated to swap file (D:) have not come online. They are present in disk management, but they are offline.
I've manually brung online those disk, than reboot and all returned to normality. Subsequent reboot have generated no issues.
In the system log I have no error message except that one of SQL that fails to came online due to the lack of disks...

This happened to me too. Except with server 2008 R2 and exchange 2010. My servers replicate offsite using zerto and I was testing failover and noticed the drive D was offline. Brought it online then rebooted and everything was fine.
So I just build a server 2012 R2 Datacenter edition VM on my production servers, gave it a second disk, initialized it, formatted it and assigned it the drive letter D. Rebooted after installing 3 windows updates and it was offline. There is nothing on this
server at all. It's a fresh install.
I'm running ESXi 5.5 build 2302651 with hardware version 8 and VMware tools version 9.4.11 build 2400950.
From my experience when you see this kind of stuff happen in multiple situations it will happen again. My worry is what if one of my hosts decides to die and HA kicks in and the disk is offline when it boots.
Anyone have anything to add to this?
Edit: My DR site where I tested my failover is DAS and my production site is iscsi. So I don't think the storage type matters.
Edit 2: The SCSI controller type is Paravirtual for all my VM's.

Windows Server 2012R2 RDS sound and smartcard redirection issues

We are using RDS collection with two Windows Server 2012R2 session hosts. Both hosts are virtual servers (clean installation) and are used as session hosts (terminals) with 10 to 25 users each. RDS Connection Broker is also virtual machine with
Windows Server 2012 R2. Our users are using Windows 7 Embedded thin clients with MSTSC RDP 8.0.
Our terminals are running correctly after fresh boot, but in 12 to 48 hours after boot we encounter problem with sound and smardcards redirection in RDP. Remote sound stops working and users cannot login with their smardcards.
Relogging users doesnt help, deleting profiles doesnt help, restarting sound service doesnt help, only viable way to solve issue is server restart. There is not any event in event log about this issue.

Hi,
Thank you for posting in Windows Server Forum.
Sound Redirection:
Please check the following GP setting as well.
Computer Configuration\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Device and Resource Redirection
Limit audio playback quality: Enabled
Audio Quality: High
On the Client PC, in the .rdp file that you use to connect to the server, make sure you have the following line:
audioqualitymode:i:2
In addition check that the Windows Audio and Windows Audio Endpoint Builder services must be running for audio to work.
Smartcard redirection:
Kindly try to update the patch for Smartcard redirection and check the result.
Smart card redirection in remote sessions fails in a Windows 7 SP1-based RDP 8.1 client
http://support.microsoft.com/kb/2913751
Hope it helps!
Thanks,
Dharmesh

Visual Studio 2013 on Window Server 2012R2

Help install of visual studio 2013 in Window Server 2012R2 - please help - I do believe there are regedit additions that has
to be made.

Hi alberc,
Please share at least your error info here so that we can troubleshoot it.
Or you can upload your logs. Please use http://aka.ms/vscollect
to gather the installation logs. After using it, you will find vslogs.cab from %temp% folder. Please upload the file to
https://skydrive.live.com/
and share the link here.
And a common troubleshooting steps have been listed here:
https://support.microsoft.com/en-us/kb/2899270?wa=wsignin1.0
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

2 Hyper-V Servers with Failover Cluster and a single File Server and .VHDs stored on a SMB 3 Share

I have 2 X M600 Dell Blades (100 GB local storage and 2 NICs) and a Single R720 File Server (2.5 TB local SAS storage and 6 NICs). I´m planning a Lab/developer enrironment using 2 Hyper-V Servers with Failover Cluster and a single File Server putting
all .VHDs stored on a SMB 3 Share on the File Server.
The ideia is to have a HA solution, live migration, etc, storing the .VHDs onm a SMB 3 share
\\fileserver\shareforVHDs
It is possible? How Cluster will understand the
\\fileserver\shareforVHDs as a cluster disk and offer HA on it?
Or i´ll have to "re-think" and forget about VHDs on SMb 3 Share and deploy using iSCSI?
Storage Spaces makes difference in this case?
All based on wind2012 R2 STD English version

I have 2 X M600 Dell Blades (100 GB local storage and 2 NICs) and a Single R720 File Server (2.5 TB local SAS storage and 6 NICs). I´m planning a Lab/developer enrironment using 2 Hyper-V Servers with Failover Cluster and a single File Server putting
all .VHDs stored on a SMB 3 Share on the File Server.
The ideia is to have a HA solution, live migration, etc, storing the .VHDs onm a SMB 3 share
\\fileserver\shareforVHDs
It is possible? How Cluster will understand the
\\fileserver\shareforVHDs as a cluster disk and offer HA on it?
Or i´ll have to "re-think" and forget about VHDs on SMb 3 Share and deploy using iSCSI?
Storage Spaces makes difference in this case?
All based on wind2012 R2 STD English version
You can do what you want to do just fine. Hyper-V / Windows Server 2012 R2 can use SMB 3.0 share instead of a block storage (iSCSI/FC/etc). See:
Deploy Hyper-V over SMB
http://technet.microsoft.com/en-us/library/jj134187.aspx
There would be no shared disk and no CSV just SMB 3.0 folder both hypervisor hosts would have access to. Much simplier to use. See:
Hyper-V recommends SMB or CSV ?
http://social.technet.microsoft.com/Forums/en-US/d6e06d59-bef3-42ba-82f1-5043713b5552/hyperv-recommends-smb-or-csv-
You'll have however a limited solution as your single physical server being a file server would be a single point of failure.
You can use Storage Spaces just fine but you cannot use Clustered Storage Spaces as in this case you'll have to take away your SAS spindles from your R720 box and mount them into SAS JBOD (make sure it's certified). So you get rid of an active components
(CPU, RAM) and keep more robust all-passive SAS JBOD as your physical shared storage. Better then a single Windows-running server but for a true fault tolerance you'll have to have 3 SAS JBODs. Not exactly cheap :) See:
Deploy Clustered Storage Spaces
http://technet.microsoft.com/en-us/library/jj822937.aspx
Storage Spaces,
JBODs, and Failover Clustering – A Recipe for Cost-Effective, Highly Available Storage
http://blogs.technet.com/b/storageserver/archive/2013/10/19/storage-spaces-jbods-and-failover-clustering-a-recipe-for-cost-effective-highly-available-storage.aspx
Using
Storage Spaces for Storage Subsystem Performance
http://msdn.microsoft.com/en-us/library/windows/hardware/dn567634.aspx#enclosure
Storage
Spaces FAQ
https://social.technet.microsoft.com/wiki/contents/articles/11382.storage-spaces-frequently-asked-questions-faq.aspx
Alternative way would be using Virtual SAN similar to VMware VSAN in this case you can get rid of a physical shared storage @ all and use cheap high capacity SATA spindles (and SATA SSDs!) instead of an expensive SAS.
Hope this helped :)
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

Windows Server 2012R2 kerberos authetication failure with IBM iSeries

Hi all,
I've an IBM iSeries in my environment configured to use kerberos authentication, this type of SSO works fine from 2 years. Every client Windows 7 or Windows 8 works fine.
Now I'm planning to deploy Windows 8.1 and Windows Server 2012R2.
I've made a lot of attempts:
Windows 2012 -> works
Windows 8 -> works
Windows 2012R2 -> does not works
Windows 8.1 -> does not works
All the server and workstation involved in thees attempts belong to the same OU and the same user are utilized.
It seems clear to me that Windows 8.1 / 2012R2 has a different behaviour with kerberos authentication but I don't found anything on the technet.
Please note that all DC are Windows server 2008R2 by two years.

Hi, any news for your problem ?
This setup should work ok.. Any firewall running on the 2012R2 or 8.1 ? did you checked the security log on the DC to see why the ticket was refused ? etc..
Regards, Philippe
Don't forget to mark as answer or vote as helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
Answer an interesting question ? Create a
wiki article about it!

Windows Server 2012R2 - svchost.exe 60-100% load!

We are using RDS collection with two Windows Server 2012R2 session hosts. Both hosts are virtual servers (clean installation) and are used as session hosts (terminals) with 10 to 25 users each. RDS Connection Broker is also virtual machine with Windows
Server 2012 R2. Our users are using Windows 7 Embedded thin clients with MSTSC RDP 8.0.
There is problem with high cpu load on these servers. Sometimes Svchost.exe starts to cause 60-100% load. Our virtual machines have 10 virtual processor cores. Load is caused by LSM (Local Session Manager) Service from DCOM Launcher group. Svchost
creates many thread as you can see on picture attached. Sometimes this load disappears after 12-24 hours, sometimes it needs restarting whole server.
We still cannot find cause of this problem, although we managed to reproduce this issue one time by logging two admin accounts to server console and force disconnecting one of these accounts by third admin account connecting to server console by RDP
mstsc.exe with -admin parameter.
Our users are very unsatisfied :-(
This is screenshot of Process Explorer - svchost.exe - Threads:

Hi,
Thank you for posting in Windows Server Forum.
Do you have any recent updates, might happens due to automatic updates which also can cause high cpu through svchost.exe. Please check as suggested by “Larry” by turning off Windows update service. In addition go through beneath articles for more information.
1. Automatic Update causes SVCHOST.exe high CPU
2. Getting Started with SVCHOST.EXE Troubleshooting
Hope it helps!
Thanks,
Dharmesh

Windows Server 2012R2 DHCP Load Sharing Mode

Hello,
I am planning to migrate a standalone DHCP Server on Windows 2003 to Windows Server 2012R2. With this migration, I like to use the 2012R2 Load Sharing Mode feature for DHCP. This implementation cover TWO sites.
My initial plan was to have two Windows 2012R2 DHCP Servers (virtual) at each site thus servers at each offers site redundancy as well. So two at Site 1 and two at Site 2 on load sharing mode. If ServerA at Site 1 goes down for some reason Server B
at Site1 will service the DHCP clients in load sharing mode without going to Site 2. I came across a MS document that says:
Number of Servers: DHCP failover is not supported for more than two DHCP Servers. The failover relationship is always comprised of two DHCP servers.
Does this mean I can have only TWO DHCP Servers in a load sharing mode. One at Site 1 and the second one at Site 2??
Thanks in advance
TIA TP

Hi,
The DHCP failover relationship is comprised of DHCP server and its partner. In a relationship there are just 2 DHCP servers.
But this doesn’t mean you can just use 2 DHCP servers in your sites. The DHCP failover setting is based on DHCP scope, for one DHCP scope there could be just one DHCP failover relationship including 2 DHCP servers. If you have more than 1 DHCP scope,
for example, set DHCP failover relationship between DHCP server 1 and DHCP server 2 for scope A. then set DHCP failover relationship between DHCP server 1 and DHCP server 3 for scope B.
The document Step-by-Step: Configure DHCP for Failover(http://technet.microsoft.com/en-us/library/hh831385.aspx) is a introduction about this function and for your reference.
Depends on the DHCP scope’s configuration and the requirements of your network. You may enhance or customize the architecture of implementation.
Best Regards,
Eve Wang

Windows Server 2012r2 Failover Cluster Event Trace Log files

Similar Messages

Maybe you are looking for