Windows Server AD Certificate Services SSL Problem with Firefox
Hello all,
I currently have problems with Active Directory Certificate Services issued SSL certificates and compatibility with Firefox (newest).
Environment: PKI has been deployed in two tier architecture, root CA and Enterprise Issuing CA. Both Servers are Windows 2008 R2, Issuing is Enterprise edition, Root Standard edition. Problem exist with the Firefox and issued certificates, when trying to
open protected page with this certificate I get:
Message: Error code: sec_error_bad_signature
Certificate looks like this:
Version: V3
Signature Algorithm: RSASSA-PSS
Signature Has Algorithm: SHA1
Root CA is trusted and installed on each machine keystore. Problem only affects Firefox, I suspect the problem is the FF keystore, because for Chrome and IE everything works.
Maybe you have the same expierence with FF compatibility issues.
Thanks in advance!
J
Hello,
for Security please ask in
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home#forum=winserversecurity&filter=alltypes&sort=lastpostdesc&content=Search and for Firefox please use the forum from them.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://msmvps.com/blogs/mweber/
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Similar Messages
-
Windows Server 2003 Certificate Services
When trying to launch Certificate Services (via Start-Programs-Administrative Tools-Certification Authority, mmc, add snap-in, etc.) I'm getting the following error:
Cannot manage Certificate Services. The specified service does not exist as an installed service. 0x424 (WIN32: 1060)
I am a member of the 'Administrators' group on the server. I also tried running mmc in system32 and SysWOW64.
Any help would be appreciated!
Thanks,
TimYou are not on a computer where AD Certificate Services is installed. You must right-click Certification Authority, and then redirect input to a computer that is actually running certificate services.
By default, the MMC binds to the local computer (hence the error message)
Brian -
Windows Server 2008 R2 Service Pack 1 installation failed with error code 0x800f0a12
Hello,
I'm facing problem to install windows server 2008 R2 SP1. I cannot install SP1. In this server have running Exchange 2010 server. to update Win2008 R2 SP1 facing the following error:
1. Service Pack installation failed with error code 0x800f0a12.
2. Installation Failure: Windows failed to install the following update with error 0x80070643: Windows Server 2008 R2 Service Pack 1 for x64-based Systems (KB976932).
Please suggestPlease run the system update readiness tool.
http://windows.microsoft.com/en-us/windows7/What-is-the-System-Update-Readiness-Tool?SignedIn=1
Then post the complete contents of;
%SYSTEMROOT%\Logs\CBS\CheckSUR.log
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
I am getting error while accessing url of lyncweb.domain.com, dialin.domain.com and meet.domain.com pointing to RP server.
502 - Web server received an invalid response while acting as a gateway or proxy server.
There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.When i try with https://lyncfrontend.domain.local:4443 and https://lyncfrontend.domain.com:4443 both opens but when i open the external domain name i get certificate .
ARR version installed is 3.0
To throw more light on the configuration:
Lync 2013 implemented, internal domain name is : domain.local and external domain name is : domain.com
All servers in VMs are with 4 core processor, 24gb ram, 1TB drive.
Frontend : Windows 2012r2 with Lync 2012 Standard Edition - 1 No (192.168.10.100)
Edge : Windows 2012 with Lync 2012 Std - 1 No
(192.168.11.101 DMZ) in workgroup
ISS ARR Reverse Proxy 3.0 : Windows 2012 with ARR and IIS configured. (192.168.11.102)
Certificate : Internal Domain root CA for internal and External (Digicert).
Internal Network : 192.168.10.x /24
External Network (DMZ) : 192.168.11.x /24
Public Firewall NAT to DMZ ip for firewall and RP server. So having two public IP facing external network.
Edge has : sip.domain.com, webconf.domain.com, av.domain.com
IIS ARR RP server has : lyncdiscover.domain.com, lyncweb.domain.com, meet.domain.com, dialin.domain.com
Have created SRV record in public : _sip.tls.domain.com >5061>sip.domain.com, _sipfederationtls._tcp.domain.com>5061>sip.domain.com, _xmpp-server._tcp.domain.com>5269>sip.domain.com
Installed frontend server using MS Lync server 2013 step by step for anyone by Matt Landis, Lync MVP.
Internal AD Integrated DNS pointing Front-end
Type of Record FQDN
IP Description
A sip.domain.com
192.168.10.100 Address internal Front End or Director for internal network clients
A admin.domain.com
192.168.10.100 URL Administration pool
A DialIn.domain.com
192.168.10.100 URL Access to Dial In
A meet.domain.com
192.168.10.100 URL of Web services meeting
A lyncdiscoverinternal.domain.com
192.168.10.100 Register for Lync AutoDiscover service to internal users
A lyncdiscover.domain.com
192.168.10.100 Register for Lync AutoDiscover service to external users
SRV Service: _sipinternaltls Protocol: _tcp Port: 5061
sip.domain.com Record pointer services to internal customer connections using TLS
External DNS pointing Edge & Proxy
Type of Record FQDN
IP Endpoint
A sip.domain.com
x.x.x.100 Edge
A webconf.domain.com
x.x.x.100 Edge
A av.domain.com
x.x.x.100 Edge
SRV _sip._tls.domain.com
sip.domain.com: 443 Edge
SRV _sipfederationtls._tcp.domain.com
sip.domain.com:5061 Edge
A Meet.domain.com
x.x.x.110 Reverse Proxy
A Dialin.domain.com
x.x.x.110 Reverse Proxy
A lyncdiscover.domain.com
x.x.x.110 Reverse Proxy
A lyncweb.domain.com
x.x.x.110 Reverse Proxy
In IIS ARR proxy server following server farms are added and configured as per link ttp://y0av.me/2013/07/22/lync2013_iisarr/
In proxy server had setup only following server farm : While running remote connectivity web service test : meet, dialin, lyncdiscover and lyncweb.
The client inside works fine internally and through vpn. Login with external client also working fine. But we are getting error in MRCA as follows.
a) While testing remote connectivity for lync getting error : The certificate couldn't be validated because SSL negotiation wasn't successful. This could have occurred as a result of a network error or because of a problem with the certificate installation.
Certificate was installed properly.
b) For remote web test under Lync throws error : A Web exception occurred because an HTTP 502 - BadGateway response was received from IIS7.
HTTP Response Headers:
Content-Length: 1477
Content-Type: text/html
Date: Wed, 14 May 2014 10:03:40 GMT
Server: Microsoft-IIS/8.0
Elapsed Time: 1300 ms.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread. -
Hi,
I am trying to install certificate services on a windows 2008 server (R2 ENT SP1) with a PCIe nCipher HSM module installed on it. The version of nCipher SW is = 11.30. It is a RootCA, and I am trying to use a key that is already stored in the HSM (I
have done this before with a PCI HSM (older HW version)). I select “Use existing private key” and “Select an existing private key on this computer” on the wizard, then i change the CSP to nCipher and click on "search" the key I am looking for
appears and I select that one. I repeat, I have done this before and it works with a PCI HSM module.
The installation is finished before being prompted to insert the operator cards, and it ends with two errors:
<Error>: Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
And:
<Error>: Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct state to perform the requested operation.
0x8007139f (WIN32: 5023)
The servermanager.log says:
1856: 2014-07-23 18:27:48.195 [CAManager] Sync: Validity period units: Years
1856: 2014-07-23 18:27:48.928 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x800703E5): CCertSrvSetup::Install: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:48.928 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress.
0x800703e5 (WIN32: 997)'
1856: 2014-07-23 18:27:48.928 [Provider] Adding error message.
1856: 2014-07-23 18:27:48.928 [Provider] [STAT] For 'Certification Authority':
And:
1856: 2014-07-23 18:27:49.053 [CAWebProxyManager] Sync: Initializing defaults
1856: 2014-07-23 18:27:49.162 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x8007139F): CCertSrvSetup::Install: The group or resource is not in the correct state to perform the requested operation. 0x8007139f (WIN32: 5023)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:49.162 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct
state to perform the requested operation. 0x8007139f (WIN32: 5023)'
1856: 2014-07-23 18:27:49.162 [Provider] Adding error message.
Has anyone experienced this before? Am I missing something here?
Any help will be very appreciated
Thanks in advance
Best regards
Alejandro Lozano VillanuevaHi, thanks for your support.
I have been playing around a bit with some ncipher commands and found this:
C:\Program Files (x86)\nCipher\nfast\bin>cspcheck.exe
cspcheck: fatal error: File key_mscapi_container-1c44b9424a23f6cddc91e8a065241a0
9aa719e4f (key #1): 0 modules contain the counter (NVRAM file ID 021c44b9424a23f
6cddc91)
cspcheck: information: 2 containers and 2 keys found.
cspcheck: fatal error occurred.
If I perform the same command on the original server (the server with the original kmdata folder and with the running RootCA services):
E:\nfast\bin>cspcheck.exe
cspcheck: information: 2 containers and 2 keys found.
cspcheck: everything seems to be in order.
Strange?
Moreover, when I do a csptest.exe command (also on both servers, i find this)
On the new server:
C:\Program Files (x86)\nCipher\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.48
User key containers:
Container 'csptest.exe' has no stored keys.
Container 'Administrator' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has no stored keys.
Container 'csptest.exe' has no stored keys.
While in the old server:
E:\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.40
User key containers:
Container 'csptest.exe' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has a 2048-bit signature key.
Container 'csptest.exe' has no stored keys.
As you can see, the container called ROOTCA, which is the one that I use during the installation, says it has no stored keys. While on the old server, it says it contains a key. Why is this happening? I dont know, I am copying the complete
key management folder from one server to another and initialize the security world with that folder as I always do, and i dont have any errors during this procedure.
Do you know what could be the cause of this? or how can I fix this? Thanks a lot, best regards.
Alejandro Lozano Villanueva -
Hi There,
Need your assistance on the issue that we are facing in prod environment.
We are able to open web console from remote machine and able to view monitoring pane as well as my workplace folders from console . Able to view and access alerts and other folder in the monitoring pane. We are able to view and access My Workplace folder
and able to view the reports in Favorite Reports folder. But when I click on run Report we are getting the below error "500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed."
In our environment we have 3 servers one is SQL server and two are SCOM servers. Please advise how to fix this issue. Do we have to do any thing from SQL End?
Errors: Event ID 21029: Performance data from the OpsMgr connector could not be collected since opening the shared data failed with error "5L".
Event ID 6002 : Performance data from the Health Service could not be collected since opening the shared data failed with error 5L (Access is denied.).
Regards,
Sanjeev KumarDuplicate thread：
http://social.technet.microsoft.com/Forums/en-US/7675113e-49f0-4b3a-932b-4aceb3cfa981/scom-500-internal-server-error-there-is-a-problem-with-the-resource-you-are-looking-for-and-it?forum=operationsmanagerreporting
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
The last time you opened OpenOffice, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again? i have a problem with open office, if I press reopen, nothing happened ans i see always this information on my mac? what can I do?
Please follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in 10.8 there is only one. If you're running a version older than 10.8, this comment isn't applicable.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
~/Library/Containers/com.apple.MailServiceAgent
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return. -
Windows Server Essentials Storage Service and Windows Server Essentials Email Service eating memory
Hi
I have Windows Server 2012 R2 with Essentials Role installed. I have integrated server with Azure AD, Office 365 and Intune using the Essentials Dashboard integration tools.
I can see that Windows Server Essentials Storage Service and Windows Server Essentials Email Service are eating much of server memory. What are these services for and why they use a lot of memory? Specially I am wondering about the Email Service. What is
it for? Server dont handle email in any way so what is this service for? I tried to google it but found nothing.Hi
I have 6GB of memory.
When I check from Resource Monitor, for Essentials Storage Service, Commit Set is 4G and Working Set is 1,8G.
Email Service Commit is about 1,8G and Working Set is just below 1G.
So these two services are reserving almost all the memory.
Memory is about 85-90% in use all the time, whether it be night or day.
Server have about 12 users and at the office there is about 2-6 person at the time. Link between server and office is 100M. There are no other services installed but the basic ones. We use server for AD (O365 integration) and file shares. Traffic in File
Shares are not big. They are more kind of an warehouse that in busy day-to-day use.
This server is about couple of months old and it has been like this since it was fired up.
I dont know what to look for from Event Logs and Process Monitor dont give me anything useful. -
Need solution for solving TIME_WAIT in TCP/IP ports in Windows Server 2008 Standard Service Pack 2
In one of our windows machine( OS : Windows Server 2008 Standard (Service Pack 2)-32bit), we are facing TIME_WAIT in all the TCP/IP ports and it is not getting closed.
On analyzing the issue, we found solution for this from the below link,
https://support.microsoft.com/en-us/kb/2553549
In this page, we are able to get the hotfix for Windows Server2008 R2 SP1 but i can't able to get for Windows Server 2008 Standard SP2(32bit). If we try to apply the hotfix vailable for SP1, it is showing "The update does not apply to your System".
Kindly provide us the solution for solving TIME_WAIT issue in the machine.
OS Details : Microsoft Windows Server 2008 Standard
Version : 6.0.6002 SP2 Build 6002
System Type : 32 bit(x86-based PC)
Awaiting for the response.
Thank you,
Pushpalatha.ADownload correct version from Microsoft Update Catalog. Run it with elevated rights.
M. -
Gday Everyone,
Two weeks ago we installed a new Server 2012 R2 with the Essentials Experience role. It was fully patched at time of deployment. We enabled O365 integration and password sync was working fine last week. This morning I went to the Dash Board to add a new
user and after clicking the O365 tab all fields show "Not available".
The system event log shows
"The Windows Server Essentials Email Service service terminated unexpectedly. It has done this 3 time(s)."
The application event log shows the following.
System.InvalidOperationException: Nullable object must have a value.
at Microsoft.WindowsServerSolutions.O365Integration.BecWebServiceAdapter.<GetSubscriptions>b__37(Subscription sub)
at System.Linq.Enumerable.WhereSelectEnumerableIterator`2.MoveNext()
at System.Collections.Generic.List`1..ctor(IEnumerable`1 collection)
at System.Linq.Enumerable.ToList[TSource](IEnumerable`1 source)
at Microsoft.WindowsServerSolutions.O365Integration.BecWebServiceAdapter.<>c__DisplayClass32.<GetCompanyInfo>b__30(AccountSkuDetails s)
at System.Linq.Enumerable.WhereSelectArrayIterator`2.MoveNext()
at System.Collections.Generic.List`1..ctor(IEnumerable`1 collection)
at System.Linq.Enumerable.ToList[TSource](IEnumerable`1 source)
at Microsoft.WindowsServerSolutions.O365Integration.BecWebServiceAdapter.GetCompanyInfo()
at Microsoft.WindowsServerSolutions.O365Integration.O365ManagementCore.QueryO365Information()
at Microsoft.WindowsServerSolutions.Common.ProviderFramework.ProviderBase`1.InvokeOperation[TResult](String operationName, Func`1 func)
at Microsoft.WindowsServerSolutions.O365Integration.O365ManagementProvider.InvokeOperationWrapperAsyncWithLocalAdminPrivilege[TResult](String operationName, Func`1 func)
at SyncInvokeQueryO365Information(Object , Object[] , Object[] )
at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)
at Microsoft.WindowsServerSolutions.Common.ProviderFramework.Internal.ExceptionScreener._ScreenForExceptions(GeneralInvoker invokeMe, Object instance, Object[] inputs, Object[]& outputs)
Stack:
at System.Environment.FailFast(System.String, System.Exception)
at Microsoft.WindowsServerSolutions.Common.ProviderFramework.Internal.ExceptionScreener._ScreenForExceptions(GeneralInvoker, System.Object, System.Object[], System.Object[] ByRef)
at Microsoft.WindowsServerSolutions.Common.ProviderFramework.Internal.ExceptionScreener.Invoke(System.Object, System.Object[], System.Object[] ByRef)
at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(System.ServiceModel.Dispatcher.MessageRpc ByRef)
at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(System.ServiceModel.Dispatcher.MessageRpc ByRef)
at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31(System.ServiceModel.Dispatcher.MessageRpc ByRef)
at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean)
at System.ServiceModel.Dispatcher.ChannelHandler.DispatchAndReleasePump(System.ServiceModel.Channels.RequestContext, Boolean, System.ServiceModel.OperationContext)
at System.ServiceModel.Dispatcher.ChannelHandler.HandleRequest(System.ServiceModel.Channels.RequestContext, System.ServiceModel.OperationContext)
at System.ServiceModel.Dispatcher.ChannelHandler.AsyncMessagePump(System.IAsyncResult)
at System.Runtime.Fx+AsyncThunk.UnhandledExceptionFrame(System.IAsyncResult)
at Microsoft.WindowsServerSolutions.Common.ProviderFramework.Internal.AsyncResult`1[[Microsoft.WindowsServerSolutions.Common.ProviderFramework.Internal.InputChannelRequeuer`1+TryReceiveResult[[System.__Canon, mscorlib, Version=4.0.0.0, Culture=neutral,
PublicKeyToken=b77a5c561934e089]], Sku, Version=6.3.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35]].Complete(Boolean, System.Func`1<TryReceiveResult<System.__Canon>>)
at Microsoft.WindowsServerSolutions.Common.ProviderFramework.Internal.CoalescingAsyncResult`1[[Microsoft.WindowsServerSolutions.Common.ProviderFramework.Internal.InputChannelRequeuer`1+TryReceiveResult[[System.__Canon, mscorlib, Version=4.0.0.0,
Culture=neutral, PublicKeyToken=b77a5c561934e089]], Sku, Version=6.3.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35]]._MyCallback(System.IAsyncResult)
at System.Runtime.AsyncResult.Complete(Boolean)
at System.ServiceModel.Channels.TransportDuplexSessionChannel+TryReceiveAsyncResult.OnReceive(System.IAsyncResult)
at System.Runtime.Fx+AsyncThunk.UnhandledExceptionFrame(System.IAsyncResult)
at System.Runtime.AsyncResult.Complete(Boolean)
at System.ServiceModel.Channels.SynchronizedMessageSource+ReceiveAsyncResult.OnReceiveComplete(System.Object)
at System.ServiceModel.Channels.SessionConnectionReader.OnAsyncReadComplete(System.Object)
at System.Runtime.Fx+AsyncThunk.UnhandledExceptionFrame(System.IAsyncResult)
at System.Net.LazyAsyncResult.Complete(IntPtr)
at System.Net.Security.NegotiateStream.ProcessFrameBody(Int32, Byte[], Int32, Int32, System.Net.AsyncProtocolRequest)
at System.Net.Security.NegotiateStream.ReadCallback(System.Net.AsyncProtocolRequest)
at System.Net.FixedSizeReader.CheckCompletionBeforeNextRead(Int32)
at System.Net.FixedSizeReader.ReadCallback(System.IAsyncResult)
at System.Runtime.AsyncResult.Complete(Boolean)
at System.ServiceModel.Channels.ConnectionStream+IOAsyncResult.OnAsyncIOComplete(System.Object)
at System.ServiceModel.Channels.SocketConnection.OnReceiveAsync(System.Object, System.Net.Sockets.SocketAsyncEventArgs)
at System.Net.Sockets.SocketAsyncEventArgs.FinishOperationSuccess(System.Net.Sockets.SocketError, Int32, System.Net.Sockets.SocketFlags)
at System.Net.Sockets.SocketAsyncEventArgs.CompletionPortCallback(UInt32, UInt32, System.Threading.NativeOverlapped*)
at System.Threading._IOCompletionCallback.PerformIOCompletionCallback(UInt32, UInt32, System.Threading.NativeOverlapped*)
The only thing we did a few days ago was enable the Azure Backup integration. I am not sure if this broke the O365 integration as I didn't go back to the O365 tab in the dashboard after installing the Azure backup.
I have spent a considerable amount of time on google, however, majority of the posts talk about Update 1 which disables the password sync service. I have checked and all services are started with exception of Windows Server Essentials Email Service (WseEmailSvc).
The Azure Backup module is working fine and the registry location HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Server\Productivity seems to hold the correct configuration information throughout the various keys.
I am at a loss as to how to proceed with this issue? I have checked but there are no pending updates and I have attempted a server reboot numerous times.
Would appreciate external input if you have seen this issue before or know where we can look to further establish what is going on.
Cheers,
ChiperI have a similar if not identical situation - I'm currently migrating from WS2012 Essentials to WS2012 R2 Standard w/Essentials role installed. The 'wseemailsvc' service continues to fail over and over, and I am unable to manage O365 accounts from within
the Essentials dashboard on the R2 server.
System Event Log:
Error 7031 - The Windows Server Essentials Email Service service terminated unexpectedly ... [repeats twice]
Error 7034 - The Windows Server Essentials Email Service service terminated unexpectedly. It has done this 3 time(s)
Application Event Log:
Source: .NET Runtime
Date: 2015-04-20 08:27:28
Event ID: 1026
Task Category: None
Level: Error
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name=".NET Runtime" />
<EventID Qualifiers="0">1026</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-04-20T14:27:28.000000000Z" />
<EventRecordID>21137</EventRecordID>
<Channel>Application</Channel>
<Computer>redacted</Computer>
<Security />
</System>
<EventData>
<Data>Application: SharedServiceHost.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.UnauthorizedAccessException
Stack:
at System.DirectoryServices.Interop.UnsafeNativeMethods+IAds.SetInfo()
at System.DirectoryServices.DirectoryEntry.CommitChanges()
at Microsoft.WindowsServerSolutions.MailService.ActiveDirectoryHelper+<>c__DisplayClass3.<SetLocalUserPrincipleName>b__1()
at Microsoft.WindowsServerSolutions.MailService.ActiveDirectoryHelper.InvokeOperationImpersonateWrapper(System.Action)
at Microsoft.WindowsServerSolutions.O365Integration.UpdateO365IntegrationDataTask.CleanUpMappingData(Microsoft.WindowsServerSolutions.O365Integration.O365User[])
at Microsoft.WindowsServerSolutions.O365Integration.UpdateO365IntegrationDataTask.Run()
at Microsoft.WindowsServerSolutions.O365Integration.BackgroundTask.TimerCallback(System.Object)
at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.TimerQueueTimer.CallCallback()
at System.Threading.TimerQueueTimer.Fire()
at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
at System.Threading.ThreadPoolWorkQueue.Dispatch()
</Data>
</EventData>
</Event>
This error is followed immediately by:
Source: Application Error
Date: 2015-04-20 08:27:28
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-04-20T14:27:28.000000000Z" />
<EventRecordID>21138</EventRecordID>
<Channel>Application</Channel>
<Computer>redacted</Computer>
<Security />
</System>
<EventData>
<Data>SharedServiceHost.exe</Data>
<Data>6.3.9600.16384</Data>
<Data>5215ca62</Data>
<Data>KERNELBASE.dll</Data>
<Data>6.3.9600.17415</Data>
<Data>54505737</Data>
<Data>e0434352</Data>
<Data>0000000000008b9c</Data>
<Data>20e4</Data>
<Data>01d07b761ad593b2</Data>
<Data>C:\Windows\System32\Essentials\SharedServiceHost.exe</Data>
<Data>C:\Windows\system32\KERNELBASE.dll</Data>
<Data>5f028783-e769-11e4-80c4-00155d10040b</Data>
<Data>
</Data>
<Data>
</Data>
</EventData>
</Event>
Any assistance with this would be greatly appreciated!
mcbundus -
Am running Firefox 3.6.10. Am having problems with Firefox crashing after upgrading to Kaspersky Internet Security 2011. Anyone else having same problem. Oh, BTW am still using Windows XP operating system.
The latest flash player release is 11,0,1,152.
Can you upgrade to this version and see whether the crash stil exists?
Go to get.adobe.com/flashplayer to download and install flash player.
In case you need direct link to installer/uninstaller, please go to http://forums.adobe.com/message/3952360#3952360 to find them.
saranlee wrote:
My computer crashes repeatedly and I get the message pages are not responding do you want to stop, and/or shockwave is not responding do you want to stop. I have Windows XP Service Pack 3, I am having the same issues whether I use Internet Explorer, Google Chrome, or Mozilla Firefox. My HP Pavilion Desktop has 504 MB of Ram and I am using high speed internet connection. Because it was crashing so much, I used the uninstall program for Flash player to uninstall Flash, I checked my registry and removed anything I saw that was Flash. I then uninstalled Google Chrome and Mozilla Firefox, then I reinstalled the most recent versions from their websites. I did the same for FlashPlayer and Shockwave Flash. I went to the Adobe website and had them check to see if it was working and it shows I have FlashPlayer 10.3.181.36. The page that shows which version of flash player goes with Windows XP states that I should have 10.3.181.34 (This is what I thought I had before I updated, I was having the same problems). When I went into my computer to see what version I have, it shows 11.5.9.620 Activex and both Flash Player and Flash Player Object is listed as 10.3.181.34. My firewall for Windows is set to medium. I also am running Norton Internet Security. It takes anywhere from 3-6minutes for some of my games to load, and I have to refresh at least 3-4 times in order to play. When I do start to play it freezes frequently and I use escape to free it up. This has been going on for a month. I have no idea what to do. I am not very computer savy and I have been learning as I go. -
CF 7.02 won't install ond Windows Server Enterprise 2003, Service Pack 1, IIS 6.0
CF 7.02 won't install on Windows Server Enterprise 2003,
Service Pack 1, IIS 6.0. When I run the Administrator the message
indicates that MX has been installed but when I open the page with
the web browser the message is Service Unavailable.I get the message when I open try to load ColdFusion
Administrator page or the index page on the cold fusion web site
that I am installing. -
Office Web Apps Server 2013 - Word Web App - Problem with Tab space
Hello We have Office Web Apps Server 2013 running with SharePoint 2013. Users Editing a Word document with Office Web Apps, can't use "Tabs", any Word document with Tabs; the tabs are replaced with a single space.
Has anyone noticed this? Is this a bug?
-thanks
thomas
-TomYes, currently the Word Web App does not support
Tab Keyboard shortcut for editing document content .
For more information, you can have a look at
the article:
http://office.microsoft.com/en-us/office-online-help/keyboard-shortcuts-in-word-online-HA010378332.aspx?CTT=5&origin=HA010380212
http://social.technet.microsoft.com/Forums/en-US/3f5978d3-67a1-4c8c-981f-32493d72610b/office-web-apps-server-2013-word-web-app-problem-with-tab-space?forum=sharepointgeneral -
hyper link of public image(hyperlink or image) can not be saved on windows server 2012 and sharepoint 2010 problem, is this a bug?
thanks for any reply.
RosoneIt is not a bug, you might be using IE in Windows server 2012 and and browser might be restricting your site actions to respond properly.
Check this in a different browser or access site in a differ OS.
Adnan Amin MCT, SharePoint Architect | If you find this post useful kindly please mark it as an answer. -
WIndows 8.1 printer error: windows cannot print due to a problem with the current printer set up
My HP OFFICEJET 8500 PRO was working just fine wirelessly until I installed the Windows 8.1 update from the Microsoft. Now I cannot print at all. I get an error that says, "windows cannot print due to a problem with the current printer set up". I have tried reinstalling and a ton of other solutions to no avail. Can someone PLEASE Help!
Hello there, @jesseangelique ,
Welcome to the Community!
I would love to help you with the printing issue you're having, since the Windows 8.1 that was done.
Please run the Print and Scan Doctor. Write me back with the results or post a screen shot of the results and I will have a look at them.
This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results.
Also, let me know which Officejet 8500 Model you have:
HP Officejet Pro 8500 All-in-One Printer - A909a
HP Officejet Pro 8500 All-in-One Printer - A909b
HP Officejet Pro 8500 Premier All-in-One Printer - A909n
HP Officejet Pro 8500 Wireless All-in-One Printer - A909g
Hope to hear from you!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!
Maybe you are looking for
-
WebHelp format does not display in Firefox
I'm using RoboHelp 7 to produce a develoment platform documentation. When producing a WebHelp output I can display the contents locally via Firefox 2.0. The process is then to copy the whole set of files to a web server via Filezilla. No pb for acces
-
Cannot load any sites, no error message, just spinning wheel "Connecting..." forever
Firefox worked fine until my computer crashed and restarted. Now when I open Firefox it will not load any page, the current tab shows "Connecting..." and has a spinning load wheel and it gets stuck like this forever, blank white page and no error or
-
In the keynote last week at the iPhone event, they stated that all buyers of "new iOS devices" would be getting the option to download iLife for free? Why wasn't this the case when i just bought my iPad2 yesterday and put iOS7 on it? Is there a sta
-
Compatibility of PDF library on non-english OS?
We have a function in our acrobat plug-in to copy some data to the clipboard using native clipboard methods like 'SetClipboardData'. Now, this copying works all find on a english OS, whereas fails on a swedish OS. The plug-in is referreing to datalog
-
Sound import to 25 fps sequence is always out of sync and need rendering!!!
Anyone know why an aif sound file from Pro Tools imported to 25 fps sequence is always out of sync and needs rendering? It is like FCP is converting it to another freq. when it is 48k already! I do this all the time with NTSC and 23.98 projects, what