Windows server anywhere access not working from outside the lan

ok so heres what i have done so far i installed windows server 2012 essential on a computer followed the wizard to add a couple of users and gave them anywhere access followed the wizard and ran the anywhere access to completion setup the ports 80 and 443
on router manually to forward to my router ip 10.0.1.20
my server is still on dynamic ip
then i go to a windows 7 ultimate computer whent to the connect url downloaded the connect tool ran to completion and restarted the computer so far everything working inside my lan i can connect to the server see shared files and open the dash management
now i go outside connect to a wired or wireless network of a friend and try to connect to http://xxxxxxx.remotewebaccess.com
but am unsuccessfull then i check on my network adapter page and see that there is a new adapter that is called as my remotewebaccess.com so i click on it and try to connect but still fails........
please help what am i doing wrong?
i checked everywhere and cant find a solution.
Thank you

It is probably better to assign a static IP to your server, but OTH it may not change. But you really hate to go off on vacation and have the ip change and everything break.
Now you said you forwarded ports 80 and 443 to your router, I bet you meant your server?
Do www.whatismyip.com and from outside ping xxxx.remotewebaccess.com and make sure they are true same ip
From a PC or the server on your network go to grc.com and do shields up and make sure it reports 80 and 443 as open
Grey

Similar Messages

SMB not working from outside the local network

Hi guys..
I've set up a storage server so that users can log in remotely and access their files. I have two connections I want to use, AFP and SMB. The AFP connections work great. No matter where our mac users are, they can log in through the net and get to their shares.
With SMB, I'm currently having a nightmare! I can't log in from other internet connections. I've checked and double checked routers, ports, etc. I have even turned everything (in terms of firewalls) off for testing. Still nothing with SMB. BUT - If I connect to the same machine with smb://127.0.0.1/ I can log in fine. If I try to connect with smb://<server ip address> then it still doesn't work.
I either get one of these 2 messages:
Data could not be read or written.
Username and Password are incorrect (even though I havn't supplied a username or password yet!)
Any help will be golden! Thanks a lot!
-Mel

Thanks a lot for the feedback.. Turns out the connection i'm testing it on (Virgin Media) does block SMB (port 445). Before I look into VPN, is it possible to change the port that SMB is operating on?
Is it easy to log in with VPN through WindowsXP? Can I send a similar string like smb:user:password@server to gain access to a VPN share through windows? Even through cmd will be fine as I intend on writing a program that can do that. I just need to know if it's possible. As I said, forgive my stupidity, I've never setup VPN before.. I think it's the only thing I havn't really dabbled in yet..
Thanks!
-Mel

SMB not working from outside local network

Hello,
On my old MacBook I installed OS X Server to create a file sharing server. I set it up using my public IP address so that I could access my files from outside the local network. I don't have an Apple router, but I found the port number for SMB and AFP and did the port forwarding. My issue is that smb stopped working. It used to work out side the network because it tested it. My Mac can still connect though outside the local network using my public IP. I have no clue why SMB is not working as it was working recently. My only idea is that I got a new modem from my ISP. Could that make a difference? I don't get it because AFP still works fine. File sharing using SMB is checked in the server app and file sharing preferences so it is not that. I am using OS X 10.8.4 on a MacBook running OS X Server version 2.2.1. Any help would be appreciated.
Thanks,
Michael

Is it a modem only, or is it a modem/router that might be creating a double-NAT on your network?
Incidentally, since you're running Server, you might want to use the built-in VPN gateway to give yourself better security - tunneling AFP/SMB through a router/firewall is pretty insecure.
Matt

Problem Windows 8 logon script not working from windows server 2008 R2

hi there , this is third post regard this problem, here is my problem goes .....
Is a very simple logon script for mapping drive purpose .... PLS take note Domain users can access and run this script for domain users using windows XP / WINDOWS VISTA / WINDOSWS 7 and only users " WINDOWS 8.1 " Does NOT run
at all . the script I put on logon script in Windows server 2008R2 group policy ...
@jrv :- http://social.technet.microsoft.com/profile/jrv/?ws=usercard-mini , insist said is my group policy setup problem so I post here agn...
Manually run the script on WINDOWS 8.1 is 100 % perfect so it is definitely not my logon script issue , PLS any guidance pls share for me ok ?? thanks
Below is my script syntax ;-
@echo off
REM Login.bat Version 1.0
REM Exit if user has logged on to the Server
IF %COMPUTERNAME%.==SL2011. GOTO END
REM Delete pre-existing drive mappings
REM
REM Map M: to SL2011 on sl2011
NET USE M: /DELETE >nul
NET USE M: \\SL2011\sl2011 /YES >nul
REM
REM Map Y: to AccScan on rss2
NET USE Y: /DELETE >nul
NET USE Y: \\rss2\Public\AccScan /YES >nul
REM

Hi Tee Ee Foong,
According to your post, the gpresult showed the GPO was applied and the script could run successfullymanully in the client. Right? Please follow the following step to narrow down
the issue:
1. Change the script to the following command: add
> %SystemDrive%\Users\test.txt to the script.
2. Log on to a client with a regular user account, run gpupdate/force, and then re-log on to this client.
3. Check if the test.txtfile exists in this location %SystemDrive%\Users.
If the test.txtfile exists, the GPO with logon script is applied successfully when user logs on. But the result of running logon script achieves the goal we excepted or not which
is still not sure.
Regards,
Lany Zhang

Remote Server Admin not working from outside of network for 1 server

Our company recently changed ISPs and I had to change our two 10.4 server's IP addresses. We have a mail server (intel xserve) and a file/web server (quicksilver g4). Both servers have two network cards in them. The problem is two-fold:
1- I can successfully manage the Xserve machine locally on our network and from my home. However, I can only manage the Quicksilver g4 server locally. Any kind of external access is not even acknowledged.
2- I'm not sure if I missed any steps when changing IP addresses for these server-based computers. Also, I'm not sure if I correctly set our dns names to the correct IP address.
For some background, this is the exact IP update process I used for each server:
Quicksilver G4 (file/web server) - Installed network card #2 and configured it with the new Public IP in the "System Preferences/Network" panel. In Server Admin I set our website to use the new public IP address. (network card #2 has no firewall device in between it and the internet.)
Then, I configured the default network card #1 to a static, yet private IP address that's behind our DLink firewall device with the rest of our network.
Intel Xserve (e-mail server) - Network card #1 was the only one setup before our network change. It had a static, public IP address. When we changed ISPs, I configured network card #2 to the new static, public IP address supplied to us by the new ISP in the "System Preferences/Network" panel. This new IP address is where all email traffic currently gets pointed to. (All mail is successfully sent and delivered.) Until our former ISP gets shutdown, I still have network card #1 configured to the older static public IP address. After the old ISP is shut off, I plan on changing network card #1 to a static, private address.
Any assistance would be greatly appreciated.
Mac OS X (10.4.8)

What should I check in AD? I am by no means an expert with AD.
Yes, I am using the same client OS.
I am talking about RDP over the internet, like from home to the office. We have a static IP assigned to the router from ISP. A static internal IP assigned to the server on the LAN. And the router port forwards 3389 to the assigned IP.
It was working fine before we reinstalled Server 2012. These are the steps I took when reinstalling:
1. format drive and install OS
2. rename the server
3. install SQL server
4. Install TFS and SharePoint
5. Add Active Directory role and promote to Domain Controller
6. Add domain users
7. Enable remote access on the server and add users to remote access list

Anywhere Access not working

Hi,
I have an HP Proliant Microserver Gen8 running Windows Server 2012 R2 Essentials and a Draytrek Vigor 2710n router.
I managed to setup Anywhere Access using a Microsoft *.remotewebaccess.com domain. It worked for one day then I installed Hyper-V it stopped after uninstalling Hyper-V it still doesn't work, I had to manually forward the ports on the router and I disabled
UPnP it wasn't doing anything.
When I try to repair it I get these errors:
Anywhere Access to your server is blocked
There may be more than one router on your network
UPnP is not enabled on the router
Thanks in advanced.

Well to start from the beginning. Hyper-V will not break remote access. I have a test box here that is never doing anything so I enabled the Hyper-V role to play with it. All still works fine including hyper-V. 4 is the PID I get also.
I suppose check the bindings on the default site in IIS Admin. It is normally set to all unassigned. Have you installed any other web stuff, media servers, etc?
Grey

Set up Search Service App For SharePoint server 2013 on Windows server 2012 R2 not working

Hi all,
I installed SharePoint server 2013 on Windows server 2012 R2 using VirtualBox. I created a DC(domain controller) server with a domain set up on one VM and it has SQL server 2012 SP1 installed. Then SharePoint 2013 on another VM was set up to access
the DC server. Everything seems working except Search Service App which cannot be sucessfully set up. Creation process for Search service app says Successful and 4 search databases were created and look fine. But when I navigate to search service app
admin page, it gives error info:
System status: The search service is not able to connect to the machine that hosts the administration component. Verify that the administration component '386f2cd6-47ca-4b3a-aeb5-d9116772ef16' in search application 'Search Service Application 1' is in
a good state and try again.
Search Application Topology: Unable to retrieve topology component health states. This may be because the admin component is not up and running.
From event viewer, I see following errors:
(1) Error From source: SharePoint Server
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance
(b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The object you are trying to create already exists. Try again using a different name.
Technical Support Details:
System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.
   at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
   at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean
isAdministrationServiceJob)
(2) Error From source: SharePoint Server Search
Could not access the Search database. A generic error occurred while trying to access the database to obtain the schema version info.
Context: Application '386f2cd6-47ca-4b3a-aeb5-d9116772ef16'
(3) Warning from source: SharePoint Server Search
A database error occurred. Source: .Net SqlClient Data Provider Code: 8169 occurred 0 time(s) Description: Error ordinal: 1 Message:
Conversion failed when converting from a character string to uniqueidentifier., Class: 16, Number: 8169, State: 2    at
System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
(4) Error From source: SharePoint Server
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance
(b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have been upgraded.
Technical Support Details:
System.Runtime.InteropServices.COMException (0xC0041235): The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have
been upgraded.
Since separate DC server and SharePoint server do not work, I installed SharePoint 2013 on DC server ( so DC server has everything on it now ) but it gives exactly same result. Later I installed SharePoint 2013 SP1 and still have the same problem with Search
Service app. I spent two weeks tried all suggestions available from Web and Google but SharePoint Search Service simply does not work. Config and other databases work but why Search Service has this issue seemingly related to search DB.
Could anybody please help out? You deserve a top SharePoint consultant award if you could find a solution. I am so frustrated and so tired by this issue.    This seems also to be a SP set up issue.
Thanks a lot.

Using new Search Service App wizard to create SSA is always a success. I could delete existing SSA and recreate it and no problem. It says successful but when I open Search Admin page from CA, it gives me errors as mentioned.
Now I used the following PS script for creating SSA from Max Mercher, but it stays at the last setps in following script:
Add-PsSnapin Microsoft.SharePoint.PowerShell -ErrorAction SilentlyContinue
$IndexLocation = "C:\Search" #Location must be empty, will be deleted during the process!
$SearchAppPoolName = "SSAPool"
$SearchAppPoolAccountName = "mydomain\admin"
$SearchServiceName = "SSA"
$SearchServiceProxyName = "SSA Proxy"
$DatabaseServer = "W12R2DC1"
$DatabaseName = "SSA"
$spAppPool = Get-SPServiceApplicationPool -Identity $SearchAppPoolName -ErrorAction SilentlyContinue
if (!$spAppPool)
$spAppPool = New-SPServiceApplicationPool -Name $SearchAppPoolName -Account $SearchAppPoolAccountName -Verbose
$ServiceApplication = Get-SPEnterpriseSearchServiceApplication -Identity $SearchServiceName -ErrorAction SilentlyContinue
if (!$ServiceApplication)
# process stays at the following step forever, already one hour now.
$ServiceApplication = New-SPEnterpriseSearchServiceApplication -Name $SearchServiceName -ApplicationPool $spAppPool.Name -DatabaseServer $DatabaseServer -DatabaseName $DatabaseName
Account mydomain\admin is an farm managed account, domain admin account, in WG_ADMIN role, It is in all SQL server roles and is DBO. I see search DBs are already on SQL server. From Event viewer, I got following errors in sequence:
(1) Crawler:Content Plugin under source Crawler:Content Plugin
Content Plugin can not be initialized - list of CSS addresses is not set.
(2) Warning for SharePoint Server Search
A database error occurred. Source: .Net SqlClient Data Provider Code: 8169 occurred 0 time(s) Description: Error ordinal: 1 Message: Conversion failed when converting from a character string to uniqueidentifier., Class: 16, Number: 8169, State: 2
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
(3) Error for SharePoint Server Search
Could not access the Search database. A generic error occurred while trying to access the database to obtain the schema version info.
Context: Application 'cbc5a055-996b-44a7-9cbc-404322f9cfdf'
(4) Error for SharePoint Server
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have been upgraded.
(5) Error Shared Services for SharePoint Server Search
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The object you are trying to create already exists. Try again using a different name.
Technical Support Details:
System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.
   at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
   at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob
Above errors keep being generated. Last step for SSA creation stay there forever. Any clue what is really going on? Thanks.

SharePoint server 2013 Search Service App on Windows server 2012 R2 not working

Hi all,
I installed SharePoint server 2013 on Windows server 2012 R2 using VirtualBox. I created a DC(domain controller) server with a domain set up on one VM and it has SQL server 2012 SP1 installed. Then SharePoint 2013 on another VM
was set up to access the DC server. Everything seems working except Search Service App which cannot be sucessfully set up. Creation process for Search service app says Successful and 4 search databases were created and look fine. But when I navigate
to search service app admin page, it gives error info:
System status: The search service is not able to connect to the machine that hosts the administration component. Verify that the administration component '386f2cd6-47ca-4b3a-aeb5-d9116772ef16' in search application 'Search Service Application 1' is
in a good state and try again.
Search Application Topology: Unable to retrieve topology component health states. This may be because the admin component is not up and running.
From event viewer, I see following errors:
(1) Error From source: SharePoint Server
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The object you are trying to create already exists. Try again using a different name.
Technical Support Details:
System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.
   at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
   at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
(2) Error From source: SharePoint Server Search
Could not access the Search database. A generic error occurred while trying to access the database to obtain the schema version info.
Context: Application '386f2cd6-47ca-4b3a-aeb5-d9116772ef16'
(3) Warning from source: SharePoint Server Search
A database error occurred. Source: .Net SqlClient Data Provider Code: 8169 occurred 0 time(s) Description: Error ordinal: 1 Message: Conversion failed when converting from a character string to uniqueidentifier., Class: 16, Number: 8169, State: 2
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
(4) Error From source: SharePoint Server
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have been upgraded.
Technical Support Details:
System.Runtime.InteropServices.COMException (0xC0041235): The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have
been upgraded.
Since separate DC server and SharePoint server do not work, I installed SharePoint 2013 on DC server ( so DC server has everything on it now ) but it gives exactly same result. Later I installed SharePoint 2013 SP1 and still have the same problem
with Search Service app. I spent two weeks tried all suggestions available from Web and Google but SharePoint Search Service simply does not work. Config and other databases work but why Search Service has this issue seemingly related to search DB.
Could anybody please help out? You deserve a top SharePoint consultant award if you could find a solution. I am so frustrated and so tired by this issue.
Thanks a lot.

Hi,
According to your post, my understanding is that SharePoint server 2013 Search Service App did not work on Windows server 2012 R2.
Please make sure you configure Search Service Application correctly. You can refer to:Create and configure a Search service application in SharePoint Server 2013
I recommend to created new Search Service Application, and made a full crawl. Then assigned the new SSA as the default SSA for webapplications. Finnlay checked the issue doesnt occur now,
If all search related components now are online, to keep the enviroonment clean, you can delete the old SSA.
Thank you for your understanding.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

WiFi through Windows server on Mac not working

Hello,
My mom's school had recently gotten a new server, a Windows 2008R2, to help make their internet connection better. The only problem is, now our macbooks can't connect to the internet in the building, with an ethernet cable or through the wifi. It worked fine before the server was set up.
The mac can connect to the wireless, but there is no internet connection. Same with an ethernet cable- even using a cable that works with one of the windows computers at the school it can't connect.
My question is, do you have an idea what the problem could be? My guess is the server doesn't allow macs, so how can I fix this? We use our macbooks for doing office work, specifically a macbook air.
The parent who set up the server doesn't know what is wrong, and doesn't know macs, so that's why I am turning to the internet.
Any help will be appreciated.

There is no Boot Camp DVD. Boot Camp Assistant is located in your Lion utilities folder. Run Boot Camp Assistant and follow the instructions. Read the Boot Camp Installation Guide for Lion http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf.
Also, if you have additional Boot Camp related questions you should post them in the Boot Camp forum https://discussions.apple.com/community/windows_software/boot_camp.

Trying to access my 851w from outside my lan, but can access inside fine

Hi,
I purchased a 851w to use as my home router and to learn more about the cisco IOS. I have been spending some time studying for CCENT/CCNA and so far I have enjoyed learning as I go. However, I am having problems accessing this router from a remote location via ssh. I can access it just fine from my lan, but not outside it from another location. Currently, I am not using this router for internet access or anything else other than learning about the IOS, and it is connected to a basic dlink wireless router dir-615. I have port forwarding setup on the dlink that any traffic coming in on port 22 is directed to the 851w at 192.168.0.150. I also have the 851w connected with a crossover cable to a switch that is connected to the dlink router.
Like I said, I can connect just fine from my lan, but can't connect from outside. I have tried a few different things but nothing works. I also use Teraterm to connect, but have tried Putty too. I also use ddns to access it, but I have also tried the wan ip address of the dlink with no luck.
Could someone please take a look at my very basic running config and explain what I might need to do different?
Thanks in advance.
Sean

Hi and thanks a bunch for your quick response.
No, I can't ping anything other than my main router which I have setup as the gateway so why is that? For example,
ip default-gateway 192.168.0.1
Wouldn't it automatically send anything it doesn't know about to the 192.168.0.0/24 router?
I have one of the switch ports, Fast Ethernet 0, connected to another switch connected to the dlink router. I have tried different ports but it didn't change anything. I don't have anything connected to the wan port of the 851w. I was trying to simulate remote access of a switch on an internal network. My next step would be to make the 851w my default router and then try to access it from the outside, but I wanted to succeed this way first.
optimus#show ip int br
Interface IP-Address OK? Method Status Protocol
Dot11Radio0 unassigned YES unset administratively down down
FastEthernet0 unassigned YES unset up up
FastEthernet1 unassigned YES unset down down
FastEthernet2 unassigned YES unset down down
FastEthernet3 unassigned YES unset up down
FastEthernet4 unassigned YES unset administratively down down
Vlan1 192.168.0.150 YES manual up up
Yes, my internal pc is on the 192.168.0.0/24 subnet.
Best Regards,
Sean

When I send an email and BBc to myself/ the BBC does not show. It uses to do all the tyears before, but we change web hosting to another company. The reason fof BCC is that I work from outside the office and want to let know what I have replied to en

We recently changed our webhosting company and i work and answer emails from another location than main office. I worked with Mail
So it is important that on the main office they can read my reply to customers. That is why I always send a BCC to myself (main account)
After the change my cc and BCC are not send. What can be the reason?? Before it worked perfectly.
Can somebody help me out of have same experience
thanks in advance
Hans

This is a user-supported board. You are not addressing Apple here. Nor is it a good idea to post your private information to a public forum. You should edit your post immediately.
Unfortunately no one here can access your support history. You must respond to the emails directly.

Access to Outlook Anywhere does not work

Good evening,
I recently installed an Exchange Server 2013 CAS / MB.
Until now, the server presented a few errors (mainly in the
event log) that does not seem to significantly influence functionality.
This week I published the server on the Internet and verified various malfunctions
related to the access from outside.
In particular from outside:
1 - OWA does not work with Windows integrated authentication, it works with the Forms based authentication;
2 - Outlook Anywhere does not work from internet.
I've done a lot of research and testing without success.
With regard to the first issue (which is not a priority but can relate to second one)
add that in Firefox I get a first authentication request. If
I enter credentials it ask again for identical authentication (repeatly), if I cancel it shows a second one that instead allows me access (are slightly different).
I assume that the first is the integrated Windows application and the second is basic authentication.
Internet Explorer shows me only the first authentication request and if I cancel shows blank page.
The problem is
priority 2:
Outlook connects without problems on LAN network, the Internet
seems to download the correct information
(autodiscover), but then does not connect
to the server (connection to Microsoft Exchange is unavailable).
If you manually edit the settings,
auto-configuration server returns as
a [email protected]. If I change
manually the server (and proxy settings
http), the result does not change.
- Setting information -
The server is installed
in the LAN network and is exposed on the Internet through
a firewall (Pat on port 443, et al. not 80)
on a public address.
The public and private DNS have been configured with a
host record (A) and two
CNAME (webmail and autodiscover).
The internal Outlook clients connect
with autodiscover and HTTPS /
NTLM / SSL (Outlook connectivity
status).
IMAP, SMTP, POP, ActiveSync function.
Exchange remote connectivity analizer retrieves Autodiscover information but doesn't pass test for RPC/HTTP access (it discard accesson
port 443 and try port 80, SPF isn't configured).
The navigation to the url
https://proxyexternalURL/rpc/rpcproxy.dll has the same behaviour like problem 1.
Test-OutlookConnectivity returns unmanaged error ('WARNING: An unexpected error has occurred and a Watson dump is being generated: Failed to find the probe result for invoke now request id -- and probe workdefinition id --').
Errors in eventviewer: 5011 - WAS (one time), 139 - MSExchange OWA (some not ripetitive), 3028 - MSExchangeApplicationLogic (every 6 hours), 106 - MSExchange common (many during working hour), 65535 - application (some at nighttime 00.00 - 03.00 a.m.), 1006
- MSExchangeDiagnostic (every 30 min), 6002 - MSExchange Mid-Tier Storage (about every 5 minutes), 5 - MSExcahnge Workload Management (one time).
Ask for further information.
- Cmdlet and Autodiscover output -
Get-OutlookAnywhere | fl name,*auth*,*ssl*,*host*
Name                               : Rpc (Default Web site)
ExternalClientAuthenticationMethod : Basic
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods           : {Basic, Ntlm, Negotiate}
SSLOffloading                      : True
ExternalClientsRequireSsl          : True
InternalClientsRequireSsl          : True
ExternalHostname                   : webmail.name_domain.test
InternalHostname                   : webmail.name_domain.test
Get-OutlookProvider | ft -autosize
Name   Server CertPrincipalName                     TTL
EXCH           msstd:webmail.name_domain.test        1
EXPR            msstd:webmail.name_domain.test        1
WEB
    1
Get-AutodiscoverVirtualDirectory | fl name,*auth*,*url*
Name                          : Autodiscover (Default Web site)
InternalAuthenticationMethods : {Basic, WSSecu.testy, OAuth}
ExternalAuthenticationMethods : {Basic, WSSecu.testy, OAuth}
LiveIdNegotiateAuthentication : False
WSSecu.testyAuthentication      : True
LiveIdBasicAuthentication     : False
BasicAuthentication           : True
DigestAuthentication          : False
WindowsAuthentication         : False
OAuthAuthentication           : True
AdfsAuthentication            : False
InternalUrl                   :
ExternalUrl                   :
Get-MapiVirtualDirectory | fl name,*auth*,*url*
Name                          : mapi (Default Web site)
IISAuthenticationMethods      : {Basic, Ntlm, Negotiate}
InternalAuthenticationMethods : {Basic, Ntlm, Negotiate}
ExternalAuthenticationMethods : {Basic, Ntlm, Negotiate}
InternalUrl                   : https://webmail.name_domain.test/mapi
ExternalUrl                   : https://webmail.name_domain.test/mapi
Autodiscover.xml
<?xml version="1.0" encoding="utf-8"?>
<Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
<Response xmlns="http://schemas.microsoft.com/exchange/autodiscover/outlook/responseschema/2006a">
    <User>
      <DisplayName>user</DisplayName>
      <LegacyDN>/o=organization_name/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=e4c0c18c8f214afbb5152bb08823179d-user</LegacyDN>
      <AutoDiscoverSMTPAddress>user@name_domain.test</AutoDiscoverSMTPAddress>
      <DeploymentId>d60c71c9-3740-404c-a38c-aa24e6105432</DeploymentId>
    </User>
    <Account>
      <AccountType>email</AccountType>
      <Action>settings</Action>
      <MicrosoftOnline>False</MicrosoftOnline>
      <Protocol>
        <Type>EXCH</Type>
        <Server>72036b30-a4d4-4b42-9c39-445bd04c23a6@name_domain.test</Server>
        <ServerDN>/o=organization_name/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=72036b30-a4d4-4b42-9c39-445bd04c23a6@name_domain.test</ServerDN>
        <ServerVersion>73C082C8</ServerVersion>
        <MdbDN>/o=organization_name/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=72036b30-a4d4-4b42-9c39-445bd04c23a6@name_domain.test/cn=Microsoft Private MDB</MdbDN>
        <PublicFolderServer>webmail.name_domain.test</PublicFolderServer>
        <AD>DC2.name_domain.test</AD>
        <ASUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</ASUrl>
        <EwsUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</EwsUrl>
        <EmwsUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</EmwsUrl>
        <EcpUrl>https://webmail.name_domain.test/ecp/</EcpUrl>
        <EcpUrl-um>?rfr=olk&p=customize/voicemail.aspx&exsvurl=1&realm=name_domain.test</EcpUrl-um>
        <EcpUrl-aggr>?rfr=olk&p=personalsettings/EmailSubscriptions.slab&exsvurl=1&realm=name_domain.test</EcpUrl-aggr>
        <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>&realm=name_domain.test</EcpUrl-mt>
        <EcpUrl-ret>?rfr=olk&p=organize/retentionpolicytags.slab&exsvurl=1&realm=name_domain.test</EcpUrl-ret>
        <EcpUrl-sms>?rfr=olk&p=sms/textmessaging.slab&exsvurl=1&realm=name_domain.test</EcpUrl-sms>
        <EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&exsvurl=1&FldID=<FldID>&realm=name_domain.test</EcpUrl-publish>
        <EcpUrl-photo>PersonalSettings/E.testAccount.aspx?rfr=olk&chgPhoto=1&exsvurl=1&realm=name_domain.test</EcpUrl-photo>
        <EcpUrl-tm>?rfr=olk&ftr=TeamMailbox&exsvurl=1&realm=name_domain.test</EcpUrl-tm>
        <EcpUrl-tmCreating>?rfr=olk&ftr=TeamMailboxCreating&SPUrl=<SPUrl>&.testle=<.testle>&SPTMAppUrl=<SPTMAppUrl>&exsvurl=1&realm=name_domain.test</EcpUrl-tmCreating>
        <EcpUrl-tmE.testing>?rfr=olk&ftr=TeamMailboxE.testing&Id=<Id>&exsvurl=1&realm=name_domain.test</EcpUrl-tmE.testing>
        <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&exsvurl=1&realm=name_domain.test</EcpUrl-extinstall>
        <OOFUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</OOFUrl>
        <UMUrl>https://webmail.name_domain.test/EWS/UM2007Legacy.asmx</UMUrl>
        <OABUrl>https://webmail.name_domain.test/OAB/e66d9a4a-6ed2-4512-b72f-522381524dd9/</OABUrl>
        <ServerExclusiveConnect>off</ServerExclusiveConnect>
        <CertPrincipalName>msstd:webmail.name_domain.test</CertPrincipalName>
      </Protocol>
      <Protocol>
        <Type>EXPR</Type>
        <Server>webmail.name_domain.test</Server>
        <SSL>On</SSL>
        <AuthPackage>Basic</AuthPackage>
        <ASUrl>https://webmail.name_domain.test/ews/exchange.asmx</ASUrl>
        <EwsUrl>https://webmail.name_domain.test/ews/exchange.asmx</EwsUrl>
        <EmwsUrl>https://webmail.name_domain.test/ews/exchange.asmx</EmwsUrl>
        <EcpUrl>https://webmail.name_domain.test/ecp/</EcpUrl>
        <EcpUrl-um>?rfr=olk&p=customize/voicemail.aspx&exsvurl=1&realm=name_domain.test</EcpUrl-um>
        <EcpUrl-aggr>?rfr=olk&p=personalsettings/EmailSubscriptions.slab&exsvurl=1&realm=name_domain.test</EcpUrl-aggr>
        <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>&realm=name_domain.test</EcpUrl-mt>
        <EcpUrl-ret>?rfr=olk&p=organize/retentionpolicytags.slab&exsvurl=1&realm=name_domain.test</EcpUrl-ret>
        <EcpUrl-sms>?rfr=olk&p=sms/textmessaging.slab&exsvurl=1&realm=name_domain.test</EcpUrl-sms>
        <EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&exsvurl=1&FldID=<FldID>&realm=name_domain.test</EcpUrl-publish>
        <EcpUrl-photo>PersonalSettings/E.testAccount.aspx?rfr=olk&chgPhoto=1&exsvurl=1&realm=name_domain.test</EcpUrl-photo>
        <EcpUrl-tm>?rfr=olk&ftr=TeamMailbox&exsvurl=1&realm=name_domain.test</EcpUrl-tm>
        <EcpUrl-tmCreating>?rfr=olk&ftr=TeamMailboxCreating&SPUrl=<SPUrl>&.testle=<.testle>&SPTMAppUrl=<SPTMAppUrl>&exsvurl=1&realm=name_domain.test</EcpUrl-tmCreating>
        <EcpUrl-tmE.testing>?rfr=olk&ftr=TeamMailboxE.testing&Id=<Id>&exsvurl=1&realm=name_domain.test</EcpUrl-tmE.testing>
        <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&exsvurl=1&realm=name_domain.test</EcpUrl-extinstall>
        <OOFUrl>https://webmail.name_domain.test/ews/exchange.asmx</OOFUrl>
        <UMUrl>https://webmail.name_domain.test/ews/UM2007Legacy.asmx</UMUrl>
        <OABUrl>https://webmail.name_domain.test/OAB/e66d9a4a-6ed2-4512-b72f-522381524dd9/</OABUrl>
        <ServerExclusiveConnect>on</ServerExclusiveConnect>
        <CertPrincipalName>msstd:webmail.name_domain.test</CertPrincipalName>
        <EwsPartnerUrl>https://webmail.name_domain.test/ews/exchange.asmx</EwsPartnerUrl>
        <GroupingInformation>LAN</GroupingInformation>
      </Protocol>
      <Protocol>
        <Type>WEB</Type>
        <Internal>
          <OWAUrl AuthenticationMethod="Basic, Fba">https://webmail.name_domain.test/</OWAUrl>
          <Protocol>
            <Type>EXCH</Type>
            <ASUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</ASUrl>
          </Protocol>
        </Internal>
        <External>
          <OWAUrl AuthenticationMethod="Basic">https://webmail.name_domain.test/</OWAUrl>
          <Protocol>
            <Type>EXPR</Type>
            <ASUrl>https://webmail.name_domain.test/ews/exchange.asmx</ASUrl>
          </Protocol>
        </External>
      </Protocol>
      <Protocol>
        <Type>EXHTTP</Type>
        <Server>webmail.name_domain.test</Server>
        <SSL>On</SSL>
        <AuthPackage>Ntlm</AuthPackage>
        <ASUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</ASUrl>
        <EwsUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</EwsUrl>
        <EmwsUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</EmwsUrl>
        <EcpUrl>https://webmail.name_domain.test/ecp/</EcpUrl>
        <EcpUrl-um>?rfr=olk&p=customize/voicemail.aspx&exsvurl=1&realm=name_domain.test</EcpUrl-um>
        <EcpUrl-aggr>?rfr=olk&p=personalsettings/EmailSubscriptions.slab&exsvurl=1&realm=name_domain.test</EcpUrl-aggr>
        <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>&realm=name_domain.test</EcpUrl-mt>
        <EcpUrl-ret>?rfr=olk&p=organize/retentionpolicytags.slab&exsvurl=1&realm=name_domain.test</EcpUrl-ret>
        <EcpUrl-sms>?rfr=olk&p=sms/textmessaging.slab&exsvurl=1&realm=name_domain.test</EcpUrl-sms>
        <EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&exsvurl=1&FldID=<FldID>&realm=name_domain.test</EcpUrl-publish>
        <EcpUrl-photo>PersonalSettings/E.testAccount.aspx?rfr=olk&chgPhoto=1&exsvurl=1&realm=name_domain.test</EcpUrl-photo>
        <EcpUrl-tm>?rfr=olk&ftr=TeamMailbox&exsvurl=1&realm=name_domain.test</EcpUrl-tm>
        <EcpUrl-tmCreating>?rfr=olk&ftr=TeamMailboxCreating&SPUrl=<SPUrl>&.testle=<.testle>&SPTMAppUrl=<SPTMAppUrl>&exsvurl=1&realm=name_domain.test</EcpUrl-tmCreating>
        <EcpUrl-tmE.testing>?rfr=olk&ftr=TeamMailboxE.testing&Id=<Id>&exsvurl=1&realm=name_domain.test</EcpUrl-tmE.testing>
        <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&exsvurl=1&realm=name_domain.test</EcpUrl-extinstall>
        <OOFUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</OOFUrl>
        <UMUrl>https://webmail.name_domain.test/EWS/UM2007Legacy.asmx</UMUrl>
        <OABUrl>https://webmail.name_domain.test/OAB/e66d9a4a-6ed2-4512-b72f-522381524dd9/</OABUrl>
        <ServerExclusiveConnect>On</ServerExclusiveConnect>
        <CertPrincipalName>msstd:webmail.name_domain.test</CertPrincipalName>
      </Protocol>
      <Protocol>
        <Type>EXHTTP</Type>
        <Server>webmail.name_domain.test</Server>
        <SSL>On</SSL>
        <AuthPackage>Basic</AuthPackage>
        <ASUrl>https://webmail.name_domain.test/ews/exchange.asmx</ASUrl>
        <EwsUrl>https://webmail.name_domain.test/ews/exchange.asmx</EwsUrl>
        <EmwsUrl>https://webmail.name_domain.test/ews/exchange.asmx</EmwsUrl>
        <EcpUrl>https://webmail.name_domain.test/ecp/</EcpUrl>
        <EcpUrl-um>?rfr=olk&p=customize/voicemail.aspx&exsvurl=1&realm=name_domain.test</EcpUrl-um>
        <EcpUrl-aggr>?rfr=olk&p=personalsettings/EmailSubscriptions.slab&exsvurl=1&realm=name_domain.test</EcpUrl-aggr>
        <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>&realm=name_domain.test</EcpUrl-mt>
        <EcpUrl-ret>?rfr=olk&p=organize/retentionpolicytags.slab&exsvurl=1&realm=name_domain.test</EcpUrl-ret>
        <EcpUrl-sms>?rfr=olk&p=sms/textmessaging.slab&exsvurl=1&realm=name_domain.test</EcpUrl-sms>
        <EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&exsvurl=1&FldID=<FldID>&realm=name_domain.test</EcpUrl-publish>
        <EcpUrl-photo>PersonalSettings/E.testAccount.aspx?rfr=olk&chgPhoto=1&exsvurl=1&realm=name_domain.test</EcpUrl-photo>
        <EcpUrl-tm>?rfr=olk&ftr=TeamMailbox&exsvurl=1&realm=name_domain.test</EcpUrl-tm>
        <EcpUrl-tmCreating>?rfr=olk&ftr=TeamMailboxCreating&SPUrl=<SPUrl>&.testle=<.testle>&SPTMAppUrl=<SPTMAppUrl>&exsvurl=1&realm=name_domain.test</EcpUrl-tmCreating>
        <EcpUrl-tmE.testing>?rfr=olk&ftr=TeamMailboxE.testing&Id=<Id>&exsvurl=1&realm=name_domain.test</EcpUrl-tmE.testing>
        <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&exsvurl=1&realm=name_domain.test</EcpUrl-extinstall>
        <OOFUrl>https://webmail.name_domain.test/ews/exchange.asmx</OOFUrl>
        <UMUrl>https://webmail.name_domain.test/ews/UM2007Legacy.asmx</UMUrl>
        <OABUrl>https://webmail.name_domain.test/OAB/e66d9a4a-6ed2-4512-b72f-522381524dd9/</OABUrl>
        <ServerExclusiveConnect>On</ServerExclusiveConnect>
        <CertPrincipalName>msstd:webmail.name_domain.test</CertPrincipalName>
      </Protocol>
    </Account>
</Response>
</Autodiscover>
Get-OwaVirtualDirectory | fl name,*auth*,*url*
Name                          : owa (Default Web Site)
ClientAuthCleanupLevel        : High
InternalAuthenticationMethods : {Basic, Fba}
BasicAuthentication           : True
WindowsAuthentication         : False
DigestAuthentication          : False
FormsAuthentication           : True
LiveIdAuthentication          : False
AdfsAuthentication            : False
OAuthAuthentication           : False
ExternalAuthenticationMethods : {Basic}
Url                           : {}
SetPhotoURL                   :
Exchange2003Url               :
FailbackUrl                   :
InternalUrl                   : https://webmail.name_domain.test/
ExternalUrl                   : https://webmail.name_domain.test/

Follow the results of the test
Outlook Anywhere (RPC over HTTP).
Has been used an account for which
outlook anywhere works. The account
for which the outlook anywhere does not work is
an administrative account and therefore
can not be used in the test.
Autodiscovery returns the
same result for both mailbox.
I'm testing RPC/HTTP connectivity.
Testing RPC over HTTP has not been exceeded.
Test steps
Microsoft connectivity Analyzer is attempting to test the Autodiscover service for user_test@domain_name.test.
Test the Autodiscover service has not been exceeded.
Test steps
I'm trying to contact the Autodiscover service with each method available.
I was not able to contact the Autodiscover service with no method.
Test steps
I'm trying to test the possible URL for the Autodiscover service https://domain_name.test/AutoDiscover/AutoDiscover.xml
The test of this potential URL for the Autodiscover service has not been exceeded.
Test steps
I'm trying to resolve the host name domain_name. DNS test.
I was able to resolve the host name.
IP addresses are returned: xxx.yyy.zzz.www
I'm testing the TCP port 443 on the host domain_name. tests to check that is open and listening.
The door has been opened properly.
I'm testing the validity of your SSL certificate.
The SSL certificate has not exceeded one or more validation controls.
Test steps
Microsoft connectivity Analyzer is attempting to obtain the SSL certificate from the remote server domain_name. test on port 443.
Microsoft connectivity Analyzer got the remote SSL certificate.
Remote certificate subject: E = it_staff@domain_name.test, CN = * domain_name. test, OU = it staff, O = domain_name, L = city, S = state, C = test issuer: E = it_staff@domain_name.test, CN = * domain_name. test, OU = it staff, O = domain_name,
L = city, S = state, C = test.
I am validating the certificate name.
I could not validate the certificate name.
More info about this issue and how to resove it
The host name domain_name. testing does not match any name found on the certificate and server = it_staff@domain_name.test, CN = * domain_name. test, OU = it staff, O = domain_name, L = city, S = state, C = test.
I'm trying to test the possible URL for the Autodiscover service https://autodiscover.domain_name.test/AutoDiscover/AutoDiscover.xml
The test of this potential URL for the Autodiscover service has not been exceeded.
Test steps
I'm trying to resolve the host name autodiscover. domain_name. DNS test.
I was able to resolve the host name.
IP addresses are returned: xxx.yyy.zzz.kkk
I'm testing the TCP port 443 on the host autodiscover. domain_name. tests to check that is open and listening.
The door has been opened properly.
I'm testing the validity of your SSL certificate.
The SSL certificate has not exceeded one or more validation controls.
Test steps
Microsoft connectivity Analyzer is attempting to obtain the SSL certificate from the remote server autodiscover. domain_name. test on port 443.
Microsoft connectivity Analyzer got the remote SSL certificate.
Other details
Remote certificate subject: CN = webmail. domain_name. test, OU = it staff, O = domain_name, L = city, S = city, C = test issuer: CN = domain_name-DC1-CA, DC = domain_name, DC = test.
I am validating the certificate name.
I validated the certificate name.
Other details
I found the host name autodiscover. domain_name. test in the voice of the alternative name of the certificate object.
Elapsed time: 1 ms.
I am validating the reliability of certificates.
I was not able to validate the reliability of the certificate.
Test steps
Microsoft connectivity Analyzer is attempting to generate certificate chains to a certificate CN = webmail. domain_name. test, OU = it staff, O = domain_name, L = city, S = city, C = test.
I failed to build a certificate chain for the certificate.
Other details
Failed to generate the certificate chain.
May be missing the required intermediate certificates.
I'm trying to contact the Autodiscover service using the HTTP redirect method.
I was not able to contact the Autodiscover service using the HTTP redirect method.
Test steps
I'm trying to resolve the host name autodiscover. domain_name. DNS test.
I was able to resolve the host name.
IP addresses are returned: xxx.yyy.zzz.kkk
I'm testing the TCP port 80 on the host autodiscover. domain_name. tests to check that is open and listening.
The specified port is blocked, is not listening or doesn't produce the expected response.
More info about this issue and how to resove it
I encountered a network error while communicating with the remote host.
I'm trying to
find the
SRV DNS record _audiscover._tcp.domain_name.test.
I failed to find
the SRV record of the
Autodiscover service
in DNS.
Some clarifications:
1 - xxx.yyy.zzz.www and xxx.yyy.zzz.kkk
are two static public addresses
of which only the latter exposes Exchange services;
2 - The certificate
*. Domain_name.test is not related
to Exchange services;
3 -I imported the certificate
of the issuing CA on the standalone test PC to validate the certificate.
3- The port 80 is not open and are not published SRV records.
Best regards.

Wake sleeping computer from outside of LAN...?

Hello.
I use Timbuktu to remotely access my home computer from work and my work computer from home. I'd like to not have to leave my computer on at home all day, but once it's set to sleep, Timbuktu can't access it. Is it possible (via 3rd party app perhaps?) to wake a computer remotely from outside the LAN? I am able to do this from within the LAN, but this doesn't help when trying to do the same from a machine outside the LAN.
Any suggestions?
Thanks,
Kristin.

You need a router that has the ability to send a "magic" packet to a MAC address that you specify. Most new routers can't do this. The IOGEAR GWA504 wireless router can do this to a computer connected via a LAN cable but not by wireless. Very old SMC routers also had this capability. You login to the router from the WAN side and tell it to send a wake-up packet to a specific MAC address.

Can not access CRM from outside the office network - Access denied You do not have sufficient access rights or privileges to perform this action.

Hi,
I can not access CRM from outside the office network - Access denied You do not have sufficient access rights or privileges to perform this action. I can access CRM with same user id and password from our office inside the network. I can get
the page to give login details once I have login details I got below error. Please help me to solve this issue. It was working before.
Access denied You do not have sufficient access rights or privileges to perform this action.
Regards,
Noushad
[email protected]

On Premise system Configured with AD FS server for claims-based authentication you need to update your host file with server url to access it from outside office network.
Refer
this on how to update host file.
Regards, Saad

I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?

I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?

Well the error message is in Swedish but says: The installation program database is damaged. Please contact the Adobe support (which is a hard thing to do!!). I use Windows 7 Home Premium with service pack 1.
Från: Mylenium
Skickat: den 29 december 2014 16:48
Till: Tony Bohman
Ämne: I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?
I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?
created by Mylenium <https://forums.adobe.com/people/Mylenium> in Downloading, Installing, Setting Up - View the full discussion <https://forums.adobe.com/message/7050595#7050595>

Windows server anywhere access not working from outside the lan

Similar Messages

Maybe you are looking for