Windows Server Essentials Connector stops responding during install Win 7 Pro to 2012 R2

I am trying to reconnect a Win 7 Pro computer to a new Essentials 2012R2 and when it asks me to set it up for just me or multiple users a message pops up saying
it has stopped responding. It sets up a profile of _clientsetup_$ and it shows up in dashboard as an offline device. This computer was hooked up to an Essentials 2012R2 previously. Tried uninstalling the connector software, removing the computer from the domain,
renaming the computer and re-installing the connector software from the http://(server)/connect. Even tried backing up the existing profiles and creating a new clean one and went through the above procedure with the same results. I set up 4 others
with no issues and it would be the bosses computer that fails. I am a newbie so any help would be greatly appreciated, thanks.

Hi,
Sorry for my interrupting.
Would you please let us know whether this problematic client computer was upgraded to Windows 7 Pro from a previous OS? Did you install any third-party application on this Windows 7 Pro client computer? Just a confirmation, thanks for your understanding.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Windows Server Essentials Connector issue

I cannot get the computer connector program to complete successfully. Had to add my 6 Pcs manually through the Properties screen on the PCs. As a result, Computers are not listed on the Anywhere Access screen and no-one can remote into their PC.
I have both, a self-signed certificate for the servername.domainname.local and a purchased certificate for the public domain on the server.
here is the computerconnector log and the clientdeployment log:
[05/27/2014 21:28:21 117c] --------------------------------------------------------------------------------------------------
[05/27/2014 21:28:21 117c] wmain: Start of Computerconnector
[05/27/2014 21:28:21 117c] GlobalData::Initialize (192.168.0.3, C:\Users\mmorton.MARCHITECTS\AppData\Local\Microsoft\Windows\INetCache\IE\8M2RXD56\ComputerConnector(192.168.0.3).exe)
[05/27/2014 21:28:21 117c] =================================
[05/27/2014 21:28:21 117c] Current Os information:
[05/27/2014 21:28:21 117c] Suite = [256]
[05/27/2014 21:28:21 117c] Type = [1]
[05/27/2014 21:28:21 117c] Architecture = [9]
[05/27/2014 21:28:21 117c] IsStarterEdition = [0]
[05/27/2014 21:28:21 117c] IsHomeSku = [0]
[05/27/2014 21:28:21 117c] Major = [6]
[05/27/2014 21:28:21 117c] Minor = [3]
[05/27/2014 21:28:21 117c] Build = [9600]
[05/27/2014 21:28:21 117c] SPMajor = [0]
[05/27/2014 21:28:21 117c] SPMinor = [0]
[05/27/2014 21:28:21 117c] =================================
[05/27/2014 21:28:21 117c] ExpandEnvironmentStrings return (C:\Windows\Temp\ClientDeploymentTempFiles\)
[05/27/2014 21:28:21 117c] SetPackageDlcUrl: .NET url is set to
http://go.microsoft.com/?linkid=9816306
[05/27/2014 21:28:21 117c] SetPackageDlcUrl: Connector url is set to
http://go.microsoft.com/fwlink/p/?LinkId=275102
[05/27/2014 21:28:21 117c] wmain: Calling Computerconnector::ShowWizard()
[05/27/2014 21:28:21 117c] CComputerconnector::ShowWizard: Initializing common controls
[05/27/2014 21:28:21 117c] CComputerconnector::ShowWizard: Done initializing common controls
[05/27/2014 21:28:21 117c] Displaying the wizard
[05/27/2014 21:28:21 117c] CComputerconnector::WelcomeDlgProc: IDD_PROPPAGE_WELCOME Page Initialization
[05/27/2014 21:28:21 117c] Current user default UI lang setting is 1033
[05/27/2014 21:28:21 1340] CComputerconnector::Run: Installation is ready to run
[05/27/2014 21:28:25 117c] CComputerconnector::TaskDlgProc: IDD_PROPPAGE_TASKS Page Initialization
[05/27/2014 21:28:25 cf0] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Detecting the current system requirements... Index= 0
[05/27/2014 21:28:25 cf0] CMsi::IsMsiInstalled: MsiQueryProductState for ProductCode {21E49794-7C13-4E84-8659-55BD378267D5} returned -1
[05/27/2014 21:28:25 cf0] CMsi::IsMsiInstalled: MsiQueryProductState for ProductCode {46DCED50-3A1D-4EF4-94F0-45F2681E3D70} returned -1
[05/27/2014 21:28:25 cf0] CMsi::IsMsiInstalled: MsiQueryProductState for ProductCode {C1E4D639-4A33-4314-809E-89BD0EF48522} returned -1
[05/27/2014 21:28:25 cf0] Connector installation state is 1
[05/27/2014 21:28:25 cf0] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Downloading .NET Framework 4.5... Index= 1
[05/27/2014 21:28:25 cf0] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Installing .NET Framework 4.5... Index= 2
[05/27/2014 21:28:25 cf0] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Downloading the Connector... Index= 3
[05/27/2014 21:28:25 cf0] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Installing Windows Server Essentials Connector... Index= 4
[05/27/2014 21:28:25 cf0] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Starting the Windows Server Essentials Connector setup... Index= 5
[05/27/2014 21:28:25 cf0] RunShellExecute: ShellExecute [C:\Windows\system32\Essentials\ClientDeploy.exe] with parameters [ -Server:192.168.0.3 -LaunchedFrom:installer]
[05/27/2014 21:28:25 117c] CComputerconnector::TaskDlgProc: DIALOG_UPDATE: Running
[05/27/2014 21:28:25 117c] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Detecting the current system requirements...
[05/27/2014 21:28:25 117c] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Downloading .NET Framework 4.5...
[05/27/2014 21:28:25 117c] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Installing .NET Framework 4.5...
[05/27/2014 21:28:25 117c] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Downloading the Connector...
[05/27/2014 21:28:25 117c] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Installing Windows Server Essentials Connector...
[05/27/2014 21:28:25 117c] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Starting the Windows Server Essentials Connector setup...
[05/27/2014 21:28:25 cf0] CComputerconnector::Run: Waiting upto 60secs for Sync Event to be signaled
[05/27/2014 21:28:26 cf0] CComputerconnector::Run: WaitForSingleObject RetVal = 0
[05/27/2014 21:28:26 117c] CComputerconnector::TaskDlgProc: DIALOG_UPDATE: Success
[05/27/2014 21:28:26 117c] wmain: End of Computerconnector: hr=0x0
[3808] 140527.212825.8067: ClientSetup: Start of ClientDeploy
[3808] 140527.212825.8267: General: Initializing...C:\Windows\system32\Essentials\ClientDeploy.exe
[3808] 140527.212825.8317: ClientSetup: Create client deployment registry subkey if necessary
[3808] 140527.212825.8367: ClientSetup: The initial launching way: -LaunchedFrom:installer
[3808] 140527.212825.8367: ClientSetup: The initial state is set
[3808] 140527.212825.8367: ClientSetup: The initial serverName: 192.168.0.3
[3808] 140527.212825.8367: ClientSetup: Loading Wizard Data
[3808] 140527.212825.8467: ClientSetup: Saving Wizard Data
[3808] 140527.212825.8467: ClientSetup: Current DeploymentStatus=Start
[3808] 140527.212826.0317: ClientSetup: Showing the Client Deployment Wizard
[3808] 140527.212826.1167: ClientSetup: Machine name:M16, length:3
[3808] 140527.212826.1267: ClientSetup: The input server name is 192.168.0.3
[5052] 140527.212826.1417: ClientSetup: Entering ConnectorWizardForm.RunTasks
[5052] 140527.212826.1417: ClientSetup: Running Task with Id=ClientDeploy.PreConfiguration
[3808] 140527.212826.1417: ClientSetup: InitWizard, The currrent stage is ConnectingToServer
[3808] 140527.212826.1417: ClientSetup: Set the Deployment Sync Event
[5052] 140527.212826.1467: ClientSetup: The configuration cab will be downloaded from 192.168.0.3
[5052] 140527.212826.1517: ClientSetup: Download file Setup.cab from server
[5052] 140527.212826.1567: ClientSetup: Making web request:
https://192.168.0.3//connect/default.aspx?Get=Setup.cab&LanguageId=1033&64bit=1
[5052] 140527.212826.1767: ClientSetup: Failed to download Setup.cab from server: System.Net.WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException:
The remote certificate is invalid according to the validation procedure.
   at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest, Exception exception)
   at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult)
   at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result)
   at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)
   at System.Net.ConnectStream.WriteHeaders(Boolean async)
   --- End of inner exception stack trace ---
   at System.Net.HttpWebRequest.GetResponse()
   at Microsoft.WindowsServerSolutions.ClientSetup.CSCommon.DownloadFileFromConnectSite(String outputDirectory, Uri serverUrl, String fileName, Int32 languageId, Boolean is64bit)
[5052] 140527.212826.1767: ClientSetup: Cannot get configuration file with https, will try http...
[5052] 140527.212826.1767: ClientSetup: Download file Setup.cab from server
[5052] 140527.212826.1767: ClientSetup: Making web request:
http://192.168.0.3//connect/default.aspx?Get=Setup.cab&LanguageId=1033&64bit=1
[5052] 140527.212826.2418: ClientSetup: Downloaded file C:\Windows\Temp\ClientDeploymentTempFiles\Setup.cab
[5052] 140527.212826.2418: ClientSetup: The configuration cab is downloaded to C:\Windows\Temp\ClientDeploymentTempFiles\Setup.cab
[5052] 140527.212826.3118: ClientSetup: Adding Server Info data in the Product Registry
[5052] 140527.212826.3218: DnsEnvironmentDetector: GetHostAddresses() returned 192.168.0.3, normal environment
[5052] 140527.212826.3218: ClientSetup: Exiting PreConfigTask.Run()
[5052] 140527.212826.3218: ClientSetup: Task with Id=ClientDeploy.PreConfiguration has TaskStatus=Success
[5052] 140527.212826.3218: ClientSetup: Task with Id=ClientDeploy.PreConfiguration has RebootStatus=NoReboot
[5052] 140527.212826.3218: ClientSetup: Exting ConnectorWizardForm.RunTasks
[5192] 140527.212859.6040: ClientSetup: Running InstallRootCert Task at WizardPage DomainUserCred
[5192] 140527.212859.6040: ClientSetup: Entering ConnectorWizardForm.RunTasks
[5192] 140527.212859.6040: ClientSetup: Running Task with Id=ClientDeploy.InstallRootCertTask
[5192] 140527.212859.6141: ClientSetup: Entering InstallRootCertTask.Run
[5192] 140527.212859.6191: ClientSetup: Install root cert to local trusted store
[5192] 140527.212859.6290: ClientSetup: Exiting InstallRootCertTask.Run
[5192] 140527.212859.6290: ClientSetup: Task with Id=ClientDeploy.InstallRootCertTask has TaskStatus=Success
[5192] 140527.212859.6290: ClientSetup: Task with Id=ClientDeploy.InstallRootCertTask has RebootStatus=NoReboot
[5192] 140527.212859.6290: ClientSetup: Exting ConnectorWizardForm.RunTasks
[5192] 140527.212859.6290: ClientSetup: Running SetupVPNAndDA Task at WizardPage DomainUserCred
[5192] 140527.212859.6290: ClientSetup: Entering ConnectorWizardForm.RunTasks
[5192] 140527.212859.6290: ClientSetup: Running Task with Id=ClientDeploy.SetupVpnAndDATask
[5192] 140527.212859.6340: ClientSetup: Entering SetupVpnAndDATask.Run
[5192] 140527.212859.6491: ClientSetup: Deploy VPN profile
[5192] 140527.212859.6891: ClientSetup: Exting SetupVpnAndDATask.Run
[5192] 140527.212859.6891: ClientSetup: Task with Id=ClientDeploy.SetupVpnAndDATask has TaskStatus=Success
[5192] 140527.212859.6991: ClientSetup: Task with Id=ClientDeploy.SetupVpnAndDATask has RebootStatus=NoReboot
[5192] 140527.212859.6991: ClientSetup: Exting ConnectorWizardForm.RunTasks
[5192] 140527.212859.6991: ClientSetup: Running ValidateUser Tasks at WizardPage DomainUserCred
[5192] 140527.212859.6991: ClientSetup: Entering ConnectorWizardForm.RunTasks
[5192] 140527.212859.6991: ClientSetup: Running Task with Id=ClientDeploy.ValidateUser
[5192] 140527.212859.7041: ClientSetup: Entering ValidateUserTask.Run
[5192] 140527.212859.7041: ClientSetup: Validating User
[5192] 140527.212859.7041: ClientSetup: Call MachineIdentityManager.GetMachineStatus
[5192] 140527.212859.7491: ClientSetup: MachineIdentityManager.GetMachineStatus had errors: ErrorCatalog:NetworkError ErrorCode:-1
BaseException: Microsoft.WindowsServerSolutions.Devices.Identity.MachineIdentityException: MachineIdentityManager.GetMachineStatus ---> System.ServiceModel.Security.SecurityNegotiationException: Could not establish trust relationship for the SSL/TLS secure
channel with authority 'marchsbs:65500'. ---> System.Net.WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote
certificate is invalid according to the validation procedure.
   at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest, Exception exception)
   at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult)
   at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result)
   at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)
   at System.Net.ConnectStream.WriteHeaders(Boolean async)
   --- End of inner exception stack trace ---
   at System.Net.HttpWebRequest.GetResponse()
   at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.HttpChannelUtilities.ProcessGetResponseWebException(WebException webException, HttpWebRequest request, HttpAbortReason abortReason)
   at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
   at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.WindowsServerSolutions.Devices.Identity.CertWebService.ICertService.GetMachineStatus(GetMachineStatusRequest request)
   at Microsoft.WindowsServerSolutions.Devices.Identity.CertWebService.CertServiceClient.GetMachineStatus(String userName, String password, String machineName, MachineStatus& status, Boolean& isAdmin, Int32& maxClientNum, Int32& currentClientNum)
   at Microsoft.WindowsServerSolutions.Devices.Identity.MachineIdentityManager.GetMachineStatus(String serverName, String userName, String password, String machineName, Boolean& isAdmin)
   --- End of inner exception stack trace ---
   at Microsoft.WindowsServerSolutions.Devices.Identity.MachineIdentityManager.GetMachineStatus(String serverName, String userName, String password, String machineName, Boolean& isAdmin)
   at Microsoft.WindowsServerSolutions.ClientSetup.ClientDeploy.ValidateUserTask.Run(WizData data)
[5192] 140527.212859.7491: ClientSetup: ProcessHelper.StartProcessWithRedirectOutput() Executing "C:\Windows\system32\ipconfig.exe" /all
[5840] 140527.212859.7641: ClientSetup: Standard Ouptput:
[5840] 140527.212859.7641: ClientSetup: Standard Ouptput: Windows IP Configuration
[5840] 140527.212859.7641: ClientSetup: Standard Ouptput:
[5840] 140527.212859.7641: ClientSetup: Standard Ouptput:    Host Name . . . . . . . . . . . . : M16
[5840] 140527.212859.7641: ClientSetup: Standard Ouptput:    Primary Dns Suffix . . . . . . . : MARCHITECTS.local
[5840] 140527.212859.7691: ClientSetup: Standard Ouptput:    Node Type . . . . . . . . . . . . : Hybrid
[5840] 140527.212859.7691: ClientSetup: Standard Ouptput:    IP Routing Enabled. . . . . . . . : No
[5840] 140527.212859.7691: ClientSetup: Standard Ouptput:    WINS Proxy Enabled. . . . . . . . : No
[5840] 140527.212859.7691: ClientSetup: Standard Ouptput:    DNS Suffix Search List. . . . . . : MARCHITECTS.local
[5840] 140527.212859.7691: ClientSetup: Standard Ouptput:
[5840] 140527.212859.7691: ClientSetup: Standard Ouptput: Ethernet adapter Ethernet:
[5840] 140527.212859.7691: ClientSetup: Standard Ouptput:
[5840] 140527.212859.7691: ClientSetup: Standard Ouptput:    Connection-specific DNS Suffix . : MARCHITECTS.local
[5840] 140527.212859.7691: ClientSetup: Standard Ouptput:    Description . . . . . . . . . . . : Intel(R) Ethernet Connection I217-LM
[5840] 140527.212859.7691: ClientSetup: Standard Ouptput:    Physical Address. . . . . . . . . : 34-17-EB-9A-DF-A4
[5840] 140527.212859.7691: ClientSetup: Standard Ouptput:    DHCP Enabled. . . . . . . . . . . : Yes
[5840] 140527.212859.7691: ClientSetup: Standard Ouptput:    Autoconfiguration Enabled . . . . : Yes
[5840] 140527.212859.7691: ClientSetup: Standard Ouptput:    IPv4 Address. . . . . . . . . . . : 192.168.0.52(Preferred)
[5840] 140527.212859.7691: ClientSetup: Standard Ouptput:    Subnet Mask . . . . . . . . . . . : 255.255.255.0
[5840] 140527.212859.7691: ClientSetup: Standard Ouptput:    Lease Obtained. . . . . . . . . . : Tuesday, May 27, 2014 3:40:29 PM
[5840] 140527.212859.7691: ClientSetup: Standard Ouptput:    Lease Expires . . . . . . . . . . : Wednesday, June 4, 2014 3:40:52 PM
[5840] 140527.212859.7691: ClientSetup: Standard Ouptput:    Default Gateway . . . . . . . . . : 192.168.0.1
[5840] 140527.212859.7691: ClientSetup: Standard Ouptput:    DHCP Server . . . . . . . . . . . : 192.168.0.3
[5840] 140527.212859.7691: ClientSetup: Standard Ouptput:    DNS Servers . . . . . . . . . . . : 192.168.0.3
[5840] 140527.212859.7691: ClientSetup: Standard Ouptput:    NetBIOS over Tcpip. . . . . . . . : Enabled
[5840] 140527.212859.7691: ClientSetup: Standard Ouptput:
[5840] 140527.212859.7691: ClientSetup: Standard Ouptput: Tunnel adapter isatap.MARCHITECTS.local:
[5840] 140527.212859.7691: ClientSetup: Standard Ouptput:
[5840] 140527.212859.7691: ClientSetup: Standard Ouptput:    Media State . . . . . . . . . . . : Media disconnected
[5840] 140527.212859.7691: ClientSetup: Standard Ouptput:    Connection-specific DNS Suffix . : MARCHITECTS.local
[5840] 140527.212859.7691: ClientSetup: Standard Ouptput:    Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
[5840] 140527.212859.7691: ClientSetup: Standard Ouptput:    Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
[5840] 140527.212859.7691: ClientSetup: Standard Ouptput:    DHCP Enabled. . . . . . . . . . . : No
[5840] 140527.212859.7691: ClientSetup: Standard Ouptput:    Autoconfiguration Enabled . . . . : Yes
[5840] 140527.212859.7691: ClientSetup: Standard Ouptput:
[5340] 140527.212859.7691: ClientSetup: Standard Error:
[5192] 140527.212859.7691: ClientSetup: The exit code of the process (C:\Windows\system32\ipconfig.exe) is: 0
[5192] 140527.212859.7691: ClientSetup: ProcessHelper.StartProcessWithRedirectOutput() Executing "C:\Windows\system32\route.exe" print
[3080] 140527.212859.7841: ClientSetup: Standard Ouptput: ===========================================================================
[3080] 140527.212859.7841: ClientSetup: Standard Ouptput: Interface List
[3080] 140527.212859.7841: ClientSetup: Standard Ouptput:   3...34 17 eb 9a df a4 ......Intel(R) Ethernet Connection I217-LM
[3080] 140527.212859.7841: ClientSetup: Standard Ouptput:   1...........................Software Loopback Interface 1
[3080] 140527.212859.7841: ClientSetup: Standard Ouptput:   6...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2
[3080] 140527.212859.7841: ClientSetup: Standard Ouptput: ===========================================================================
[3080] 140527.212859.7841: ClientSetup: Standard Ouptput:
[3080] 140527.212859.7841: ClientSetup: Standard Ouptput: IPv4 Route Table
[3080] 140527.212859.7841: ClientSetup: Standard Ouptput: ===========================================================================
[3080] 140527.212859.7841: ClientSetup: Standard Ouptput: Active Routes:
[3080] 140527.212859.7841: ClientSetup: Standard Ouptput: Network Destination        Netmask          Gateway       Interface Metric
[6116] 140527.212859.7841: ClientSetup: Standard Error:
[3080] 140527.212859.7841: ClientSetup: Standard Ouptput:           0.0.0.0          0.0.0.0      192.168.0.1     192.168.0.52
10
[3080] 140527.212859.7841: ClientSetup: Standard Ouptput:         127.0.0.0        255.0.0.0         On-link
127.0.0.1    306
[3080] 140527.212859.7841: ClientSetup: Standard Ouptput:         127.0.0.1 255.255.255.255         On-link         127.0.0.1
306
[3080] 140527.212859.7841: ClientSetup: Standard Ouptput:   127.255.255.255 255.255.255.255         On-link         127.0.0.1    306
[3080] 140527.212859.7841: ClientSetup: Standard Ouptput:       192.168.0.0    255.255.255.0         On-link      192.168.0.52    266
[3080] 140527.212859.7841: ClientSetup: Standard Ouptput:      192.168.0.52 255.255.255.255         On-link      192.168.0.52    266
[3080] 140527.212859.7841: ClientSetup: Standard Ouptput:     192.168.0.255 255.255.255.255         On-link      192.168.0.52    266
[3080] 140527.212859.7841: ClientSetup: Standard Ouptput:         224.0.0.0        240.0.0.0         On-link
127.0.0.1    306
[5192] 140527.212859.7841: ClientSetup: The exit code of the process (C:\Windows\system32\route.exe) is: 0
[3080] 140527.212859.7841: ClientSetup: Standard Ouptput:         224.0.0.0        240.0.0.0         On-link      192.168.0.52
266
[3080] 140527.212859.7841: ClientSetup: Standard Ouptput:   255.255.255.255 255.255.255.255         On-link         127.0.0.1    306
[3080] 140527.212859.7841: ClientSetup: Standard Ouptput:   255.255.255.255 255.255.255.255         On-link      192.168.0.52    266
[3080] 140527.212859.7841: ClientSetup: Standard Ouptput: ===========================================================================
[3080] 140527.212859.7841: ClientSetup: Standard Ouptput: Persistent Routes:
[3080] 140527.212859.7841: ClientSetup: Standard Ouptput:   None
[3080] 140527.212859.7841: ClientSetup: Standard Ouptput:
[3080] 140527.212859.7841: ClientSetup: Standard Ouptput: IPv6 Route Table
[3080] 140527.212859.7841: ClientSetup: Standard Ouptput: ===========================================================================
[3080] 140527.212859.7841: ClientSetup: Standard Ouptput: Active Routes:
[3080] 140527.212859.7841: ClientSetup: Standard Ouptput: If Metric Network Destination      Gateway
[3080] 140527.212859.7841: ClientSetup: Standard Ouptput:   1    306 ::1/128                  On-link
[3080] 140527.212859.7841: ClientSetup: Standard Ouptput:   1    306 ff00::/8                 On-link
[3080] 140527.212859.7841: ClientSetup: Standard Ouptput: ===========================================================================
[3080] 140527.212859.7841: ClientSetup: Standard Ouptput: Persistent Routes:
[3080] 140527.212859.7841: ClientSetup: Standard Ouptput:   None
[3080] 140527.212859.7841: ClientSetup: Standard Ouptput:
[5192] 140527.212859.7841: ClientSetup: ProcessHelper.StartProcessWithRedirectOutput() Executing "C:\Windows\system32\nslookup.exe" MARCHSBS
[5340] 140527.212859.7991: ClientSetup: Standard Ouptput: Server: marchsbs.marchitects.local
[5340] 140527.212859.7991: ClientSetup: Standard Ouptput: Address: 192.168.0.3
[5340] 140527.212859.7991: ClientSetup: Standard Ouptput:
[5340] 140527.212859.7991: ClientSetup: Standard Ouptput: Name:    MARCHSBS.MARCHITECTS.local
[5340] 140527.212859.7991: ClientSetup: Standard Ouptput: Address: 192.168.0.3
[5340] 140527.212859.7991: ClientSetup: Standard Ouptput:
[6116] 140527.212859.7991: ClientSetup: Standard Error:
[5340] 140527.212859.7991: ClientSetup: Standard Ouptput:
[5192] 140527.212859.7991: ClientSetup: The exit code of the process (C:\Windows\system32\nslookup.exe) is: 0
[5192] 140527.212859.7991: ClientSetup: Set CD Fail reason 10 for SQM in ClientDeployment.exe
[5192] 140527.212859.8041: ClientSetup: RecordClientDeploymentFailReason: Save registry failed in ClientDeployment.exe : System.UnauthorizedAccessException: Cannot write to the registry key.
   at Microsoft.Win32.RegistryKey.EnsureWriteable()
   at Microsoft.Win32.RegistryKey.CreateSubKeyInternal(String subkey, RegistryKeyPermissionCheck permissionCheck, Object registrySecurityObj, RegistryOptions registryOptions)
   at Microsoft.Win32.RegistryKey.CreateSubKey(String subkey, RegistryKeyPermissionCheck permissionCheck)
   at Microsoft.WindowsServerSolutions.ClientSetup.ClientDeploy.Helper.RecordClientDeploymentFailReason(UInt32 failReason)
[5192] 140527.212859.8041: ClientSetup: Exiting ValidateUserTask.Run
[5192] 140527.212859.8041: ClientSetup: Task with Id=ClientDeploy.ValidateUser has TaskStatus=Failed
[5192] 140527.212859.8041: ClientSetup: Task with Id=ClientDeploy.ValidateUser has RebootStatus=NoReboot
[5192] 140527.212859.8041: ClientSetup: Exting ConnectorWizardForm.RunTasks
[3808] 140527.212910.2736: ClientSetup: Back from the Client Deployment Wizard
[3808] 140527.212910.2786: ServerDiscovery:HostsFileUpdater: Removing hosts file entry: MARCHSBS
[3808] 140527.212910.2836: ClientSetup: Saving Wizard Data
[3808] 140527.212910.2836: ClientSetup: End of ClientDeploy: ErrorCode=1603

Hooray!
testing the certificates and not finding any errors, I stumbled across the Basic Settings button that highlighted an authorization problem. I manually set the authorization to the admin account and by problems disappeared. I am now able to successfully
join client PCs to the domain thru the //Server/connect method.

Windows Server 2008 SP2 stops responding as multiple services timeout

There is another thread open under the "General" section. I was asked to post it here. I have left the other thread open because I believe this is not just applicable to the Remote Desktop Services Role. (http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/94b0d7f7-6a26-4795-8c1f-ffee1ac309aa/)
Hey everyone,
I have now seen this issue happen on multiple Windows Server 2008 Terminal server setups. The services that time out are not exactly the same across all the servers, but a number of them are the same on all of them.
Here are the lists of services that timed out on one of these servers, along with the time it happened.
80237AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the AudioEndpointBuilder service.
80307AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the BITS service.
80237AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the CertPropSvc service.
80407AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the CryptSvc service.
80437AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the Netman service.
80507AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the NlaSvc service.
80537AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the RasMan service.
80607AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the Schedule service.
80637AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the seclogon service.
80707AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the ShellHWDetection service.
80737AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the UmRdpService service.
80807AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the UxSms service.
80837AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the WinVNC4 service.
80851AM - The Terminal Server security layer detected an error in the protocol stream and has disconnected the client.
80907AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the WPDBusEnum service.
80938AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the wuauserv service.
81008AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the ShellHWDetection service.
In the end, the server has to be restarted for us to access it and for users to connect to it.
Doing some research, I cam across this KB article (http://support.microsoft.com/kb/972596/), but not sure if it applies to this situation. I have seen
other people post about this issue, but haven't come across anything that states the cause and resolution.
Has anyone else faced this or is facing it at the moment?
Any tips or suggestions would be great!
Thanks a lot!
Warm regards,
Sri

There is another thread open under the "General" section. I was asked to post it here. I have left the other thread open because I believe this is not just applicable to the Remote Desktop Services Role. (http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/94b0d7f7-6a26-4795-8c1f-ffee1ac309aa/)
Hey everyone,
I have now seen this issue happen on multiple Windows Server 2008 Terminal server setups. The services that time out are not exactly the same across all the servers, but a number of them are the same on all of them.
Here are the lists of services that timed out on one of these servers, along with the time it happened.
80237AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the AudioEndpointBuilder service.
80307AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the BITS service.
80237AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the CertPropSvc service.
80407AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the CryptSvc service.
80437AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the Netman service.
80507AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the NlaSvc service.
80537AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the RasMan service.
80607AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the Schedule service.
80637AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the seclogon service.
80707AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the ShellHWDetection service.
80737AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the UmRdpService service.
80807AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the UxSms service.
80837AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the WinVNC4 service.
80851AM - The Terminal Server security layer detected an error in the protocol stream and has disconnected the client.
80907AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the WPDBusEnum service.
80938AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the wuauserv service.
81008AM - A timeout (30000 milliseconds) was reached while waiting for a transaction response from the ShellHWDetection service.
In the end, the server has to be restarted for us to access it and for users to connect to it.
Doing some research, I cam across this KB article (http://support.microsoft.com/kb/972596/), but not sure if it applies to this situation. I have seen
other people post about this issue, but haven't come across anything that states the cause and resolution.
Has anyone else faced this or is facing it at the moment?
Any tips or suggestions would be great!
Thanks a lot!
Warm regards,
Sri
I have exactly same problem with my two Terminal Servers (Windows 2008 SP2) and I dont find any resolution.Andre Fogaça

Receive a "Server is Not Available" error when trying to connect win 7 pro PC to Windows Server Essentials 2012 R2 Domain via Connector

I am trying to connect Windows 7 Pro 64 bit SP1 Computers to a Windows Server 2012 Essentials R2 domain and I receive the following error: "The server is not available. Try connecting to this computer again, or for more information, see Troubleshoot
connecting computers to the server." I have tried all of the steps in the Microsoft technet article "http://technet.microsoft.com/library/jj635102.aspx" and still am receiving this error. A little background on this specific case...
All of these computers were already attached to a different Windows Server Essentials 2012 R2 domain. They have all been taken off the existing domain and added to a workgroup. I have uninstalled the Server Essentials 2012 Connector and deleted
all log files. Has anyone else had this issue? Any help would be greatly appreciated! This is an urgent issue... Thanks in advance all!

Would you be willing to run this script on your server?
http://gallery.technet.microsoft.com/Windows-Server-Essentials-556159c3
Also on a client to test connectivity?
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+

[Forum FAQ] How to install and configure Windows Server Essentials Experience role on Windows Server 2012 R2 Standard via PowerShell locally and remotely

As we all know,
the Windows Server Essentials Experience role is available in Windows Server 2012 R2 Standard and Windows Server 2012 R2 Datacenter. We can add the Windows Server
Essentials Experience role in Server Manager or via Windows PowerShell.
In this article, we introduce the steps to install and configure Windows
Server Essentials Experience role on Windows Server 2012 R2 Standard via PowerShell locally and remotely. For better analyze, we divide this article into two parts.
Before installing the Windows Server Essentials Experience Role, please use
Get-WindowsFeature
PowerShell cmdlet to ensure the Windows Server Essentials Experience (ServerEssentialsRole) is available. (Figure 1)
Figure 1.
Part 1: Install Windows Server Essentials Experience role locally
Add Windows Server Essentials Experience role
Run Windows PowerShell as administrator, then type
Add-WindowsFeature ServerEssentialsRole cmdlet to install Windows Server Essentials Experience role. (Figure 2)
Figure 2.
Note: It is necessary to configure Windows Server Essentials Experience (Post-deployment Configuration). Otherwise, you will encounter following issue when opening Dashboard.
(Figure 3)
Figure 3.
2. Configure Windows Server Essentials Experience role
(1) In an existing domain environment
Firstly, please join the Windows Server 2012 R2 Standard computer to the existing domain through the path:
Control Panel\System\Change Settings\”Change…”\Member of. (Figure 4)
Figure 4.
After that, please install Windows Server Essentials Experience role as original description. After installation completed, please use the following command to configure Windows
Server Essentials:
Start-WssConfigurationService –Credential <Your Credential>
Note: The type of
Your Credential should be as: Domain-Name\Domain-User-Account.
You must be a member of the Enterprise Admin group and Domain Admin group in Active Directory when using the command above to configure Windows Server Essentials. (Figure 5)
Figure 5.
Next, you can type the password for the domain account. (Figure 6)
Figure 6.
After setting the credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 7)
Figure 7.
By the way, you can use
Get-WssConfigurationStatus
PowerShell cmdlet to
get the status of the configuration of Windows Server Essentials. Specify the
ShowProgress parameter to view a progress indicator. (Figure 8)
Figure 8.
(2) In a non-domain environment
Open PowerShell (Run as Administrator) on the Windows Server 2012 R2 Standard and type following PowerShell cmdlets: (Figure 9)
Start-WssConfigurationService -CompanyName "xxx" -DNSName "xxx" -NetBiosName "xxx" -ComputerName "xxx” –NewAdminCredential $cred
Figure 9.
After you type the commands above and click Enter, you can create a new administrator credential. (Figure 10)
After creating the new administrator credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 11)
After a reboot, all the configurations will be completed and you can open the Windows Server Essentials Dashboard without any errors. (Figure 12)
Figure 12.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Part 2: Install and configure Windows Server Essentials Experience role remotely
In an existing domain environment
In an existing domain environment, please use following command to provide credential and then add Server Essentials Role: (Figure 13)
Add-WindowsFeature -Name ServerEssentialsRole
-ComputerName xxx -Credential DomainName\DomainAccount
Figure 13.
After you enter the credential, it will start install Windows Server Essentials role on your computer. (Figure 14)
Figure 14.
After the installation completes, it will return the result as below:
Figure 15.
Next, please use the
Enter-PSSession
cmdlet and provide the correct credential to start an interactive session with a remote computer. You can use the commands below:
Enter-PSSession –ComputerName
xxx –Credential DomainName\DomainAccount (Figure 16)
Figure 16.
Then, please configure Server Essentials Role via
Add-WssConfigurationService cmdlet and it also needs to provide correct credential. (Figure 17)
Figure 17.
After your credential is accepted, it will update and prepare your server. (Figure 18)
Figure 18.
After that, please type “Y” to continue to configure Windows Server Essentials. (Figure 19)
Figure 19.
2. In a non-domain environment
In my test environment, I set up two computers running Windows Server 2012 R2 Standard and use Server1 as a target computer. The IP addresses for the two computers are as
below:
Sevrer1: 192.168.1.54
Server2: 192.168.1.53
Run
Enable-PSRemoting –Force on Server1. (Figure 20)
Figure 20.
Since there is no existing domain, it is necessary to add the target computer (Server1) to a TrustedHosts list (maintained by WinRM) on Server 2. We can use following command
to
add the TrustedHosts entry:
Set-Item WSMan:\localhost\Client\TrustedHosts IP-Address
(Figure 21)
Figure 21.
Next, we can use
Enter-PSSession
cmdlet and provide the correct credential to start an interactive session with the remote computer. (Figure 22)
Figure 22.
After that, you can install Windows Server Essentials Experience Role remotely via Add-WindowsFeature ServerEssentialsRole cmdlet. (Figure 23)
Figure 23.
From figure 24, we can see that the installation is completed.
Figure 24.
Then you can use
Start-WssConfigurationService cmdlet to configure Essentials Role and follow the steps in the first part (configure Windows Server Essentials Experience in a non-domain environment) as the steps would be the same.
The figure below shows the status of Windows Server Essentials.
Figure
25.
Finally, we have successfully configured Windows Server Essentials on Server1. (Figure 26)
Figure 26.
More information:
[Forum
FAQ] Introduce Windows Powershell Remoting
Windows Server Essentials Setup Cmdlets
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Installing Windows Server Essentials Experience in SBS 2011 Environment

Scenario: I currently have an SBS 2011 environment with two sites. The business has rapidly grown since I first installed the SBS at the main site. I have setup a new office with a separate AD site. At secondary office I have a DC and a file server (all
bound to the same domain as the SBS).
My question is, can I setup the file server with Windows Server Essentials experience without it messing up the SBS schema? I know the WSEE is supported on an existing single domain environment but not sure if it will mess up anything on the SBS AD environment
since we are using the builtin exchange.
regards,
LJAC

Hi,
My goal isn't to have an SBS server in one site and an Essentials server in the other. I have an SBS at the main site and a Windows Server 2012 R2 'Standard' in the other acting as a DC to the same domain as the SBS. My goal is to use the Anywhere Access feature
at the site with the 2012 R2 server by installing the Essentials experience role. Both sites will be on the same domain and only users at the 2012 site will be using the Anywhere Access feature.
Eventually I'll be migrating the SBS to 2012 R2 server and Exchange 2013 but thats way down the line.
Thank you for your response!
Ljac

Integrate On-Premises Exchange Server With Windows Server Essentials

I have Exchange Server 2013 installed on Win Server 2012 R2 joined to Windows Server Essentials domain. Attempting to integrate the Exchange Server into the Essentials domain from the Essentials Dashboard using the wizard fails with the error, "Cannot
locate an Exchange Server on the network. Make sure that your Exchange Server is setup and that it is connected to the network". I can communicate with the server in multiple ways from the Essentials Server and other computers on the domain. Mail
flow in and out of the Exchange Server works without issue. I can use the various management tools to administer the Exchange Server. The only task I cannot complete is integrating it into the Essentials environment which I need to do to move on
to creating user mailboxes for user accounts setup in AD.
All research to date has come up empty handed.
Help!

Hi RSUL,
Any update?
On current situation, would you please let me confirm something more? It may help me to understand this issue
clearly.
Would you please let me know how join the Windows Server 2012 R2 (which had been installed Exchange Server 2013) to Windows Server Essentials domain? Did use Connector software
(type http://servername/connect)?
On server essentials, please open Dashboard and navigate to DEVICES. Then check the Status of this server which had been installed Exchange Server 2013.
Currently, the Services Integration features, including on-premises Exchange integration, are only supported in a single domain controller environment. Meanwhile, the integration
wizard must be run on a domain controller.
In addition, please refer to the following article and check if can help you.
On
Premises Exchange Integration Windows Server 2012 Essentials
Integrate an On-Premises Exchange Server
with Windows Server Essentials
By the way, please check Event Viewer and some relevant logs if you can find some more clues.
Hope this helps.
Best regards,
Justin Gu

Windows Server Essentials error occurred while configuring on Windows Server 2012 R2 Standard

am attempting to install the Windows Server Essentials on a new domain controller in a new domain and forest. I go to add roles and features and select essentials. The config wizard says it is Updating and Preparing the Server and
That is all the information that you need to provide. Your server is being prepared for use and may restart more than once. This may take up to 30 minutes.
It goes to 3% and the encounters an error saying An error occurred while configuring Windows Server Essentials. Please try again. I don't seem to find anything in the log to indicate why it fails.

Hi boe_d,
Based on your description, did you mean that this error was occurred in process of installing the Windows Server
Essentials Experience Role on Windows Server 2012 R2 Standard? If I misunderstand, please don’t hesitate to let me know.
If it is, have you re-tried the role installation? Please check if still go to 3% and then get the same error
message.
In addition, please add
ServerAdmin$ account to the Logon as a service Group Policy, and then monitor the result. For more details, please refer to the following article.
You may be unable to run post-deployment configuration wizard after you install the Windows Server Essentials
Experience role
http://blogs.technet.com/b/sbs/archive/2013/12/04/you-may-be-unable-to-run-post-deployment-configuration-wizard-after-you-install-the-windows-server-essentials-experience-role.aspx
If this issue still exists, please navigate to: %windir%\Logs\CBS folder and check the CBS log file if you
can find any error that depend on the Essentials Experience Role setup time.
Hope this helps.
Best regards,
Justin Gu

Windows Server Essentials Storage Service and Windows Server Essentials Email Service eating memory

Hi
I have Windows Server 2012 R2 with Essentials Role installed. I have integrated server with Azure AD, Office 365 and Intune using the Essentials Dashboard integration tools.
I can see that Windows Server Essentials Storage Service and Windows Server Essentials Email Service are eating much of server memory. What are these services for and why they use a lot of memory? Specially I am wondering about the Email Service. What is
it for? Server dont handle email in any way so what is this service for? I tried to google it but found nothing.

Hi
I have 6GB of memory.
When I check from Resource Monitor, for Essentials Storage Service, Commit Set is 4G and Working Set is 1,8G.
Email Service Commit is about 1,8G and Working Set is just below 1G.
So these two services are reserving almost all the memory.
Memory is about 85-90% in use all the time, whether it be night or day.
Server have about 12 users and at the office there is about 2-6 person at the time. Link between server and office is 100M. There are no other services installed but the basic ones. We use server for AD (O365 integration) and file shares. Traffic in File
Shares are not big. They are more kind of an warehouse that in busy day-to-day use.
This server is about couple of months old and it has been like this since it was fired up.
I dont know what to look for from Event Logs and Process Monitor dont give me anything useful.

Windows Server Essentials Email Service Won't Start SharedServiceHost.exe Unhandled exception from operation

Gday Everyone,
Two weeks ago we installed a new Server 2012 R2 with the Essentials Experience role. It was fully patched at time of deployment. We enabled O365 integration and password sync was working fine last week. This morning I went to the Dash Board to add a new
user and after clicking the O365 tab all fields show "Not available".
The system event log shows
"The Windows Server Essentials Email Service service terminated unexpectedly. It has done this 3 time(s)."
The application event log shows the following.
System.InvalidOperationException: Nullable object must have a value.
   at Microsoft.WindowsServerSolutions.O365Integration.BecWebServiceAdapter.<GetSubscriptions>b__37(Subscription sub)
   at System.Linq.Enumerable.WhereSelectEnumerableIterator`2.MoveNext()
   at System.Collections.Generic.List`1..ctor(IEnumerable`1 collection)
   at System.Linq.Enumerable.ToList[TSource](IEnumerable`1 source)
   at Microsoft.WindowsServerSolutions.O365Integration.BecWebServiceAdapter.<>c__DisplayClass32.<GetCompanyInfo>b__30(AccountSkuDetails s)
   at System.Linq.Enumerable.WhereSelectArrayIterator`2.MoveNext()
   at System.Collections.Generic.List`1..ctor(IEnumerable`1 collection)
   at System.Linq.Enumerable.ToList[TSource](IEnumerable`1 source)
   at Microsoft.WindowsServerSolutions.O365Integration.BecWebServiceAdapter.GetCompanyInfo()
   at Microsoft.WindowsServerSolutions.O365Integration.O365ManagementCore.QueryO365Information()
   at Microsoft.WindowsServerSolutions.Common.ProviderFramework.ProviderBase`1.InvokeOperation[TResult](String operationName, Func`1 func)
   at Microsoft.WindowsServerSolutions.O365Integration.O365ManagementProvider.InvokeOperationWrapperAsyncWithLocalAdminPrivilege[TResult](String operationName, Func`1 func)
   at SyncInvokeQueryO365Information(Object , Object[] , Object[] )
   at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)
   at Microsoft.WindowsServerSolutions.Common.ProviderFramework.Internal.ExceptionScreener._ScreenForExceptions(GeneralInvoker invokeMe, Object instance, Object[] inputs, Object[]& outputs)
Stack:
   at System.Environment.FailFast(System.String, System.Exception)
   at Microsoft.WindowsServerSolutions.Common.ProviderFramework.Internal.ExceptionScreener._ScreenForExceptions(GeneralInvoker, System.Object, System.Object[], System.Object[] ByRef)
   at Microsoft.WindowsServerSolutions.Common.ProviderFramework.Internal.ExceptionScreener.Invoke(System.Object, System.Object[], System.Object[] ByRef)
   at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(System.ServiceModel.Dispatcher.MessageRpc ByRef)
   at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(System.ServiceModel.Dispatcher.MessageRpc ByRef)
   at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31(System.ServiceModel.Dispatcher.MessageRpc ByRef)
   at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean)
   at System.ServiceModel.Dispatcher.ChannelHandler.DispatchAndReleasePump(System.ServiceModel.Channels.RequestContext, Boolean, System.ServiceModel.OperationContext)
   at System.ServiceModel.Dispatcher.ChannelHandler.HandleRequest(System.ServiceModel.Channels.RequestContext, System.ServiceModel.OperationContext)
   at System.ServiceModel.Dispatcher.ChannelHandler.AsyncMessagePump(System.IAsyncResult)
   at System.Runtime.Fx+AsyncThunk.UnhandledExceptionFrame(System.IAsyncResult)
   at Microsoft.WindowsServerSolutions.Common.ProviderFramework.Internal.AsyncResult`1[[Microsoft.WindowsServerSolutions.Common.ProviderFramework.Internal.InputChannelRequeuer`1+TryReceiveResult[[System.__Canon, mscorlib, Version=4.0.0.0, Culture=neutral,
PublicKeyToken=b77a5c561934e089]], Sku, Version=6.3.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35]].Complete(Boolean, System.Func`1<TryReceiveResult<System.__Canon>>)
   at Microsoft.WindowsServerSolutions.Common.ProviderFramework.Internal.CoalescingAsyncResult`1[[Microsoft.WindowsServerSolutions.Common.ProviderFramework.Internal.InputChannelRequeuer`1+TryReceiveResult[[System.__Canon, mscorlib, Version=4.0.0.0,
Culture=neutral, PublicKeyToken=b77a5c561934e089]], Sku, Version=6.3.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35]]._MyCallback(System.IAsyncResult)
   at System.Runtime.AsyncResult.Complete(Boolean)
   at System.ServiceModel.Channels.TransportDuplexSessionChannel+TryReceiveAsyncResult.OnReceive(System.IAsyncResult)
   at System.Runtime.Fx+AsyncThunk.UnhandledExceptionFrame(System.IAsyncResult)
   at System.Runtime.AsyncResult.Complete(Boolean)
   at System.ServiceModel.Channels.SynchronizedMessageSource+ReceiveAsyncResult.OnReceiveComplete(System.Object)
   at System.ServiceModel.Channels.SessionConnectionReader.OnAsyncReadComplete(System.Object)
   at System.Runtime.Fx+AsyncThunk.UnhandledExceptionFrame(System.IAsyncResult)
   at System.Net.LazyAsyncResult.Complete(IntPtr)
   at System.Net.Security.NegotiateStream.ProcessFrameBody(Int32, Byte[], Int32, Int32, System.Net.AsyncProtocolRequest)
   at System.Net.Security.NegotiateStream.ReadCallback(System.Net.AsyncProtocolRequest)
   at System.Net.FixedSizeReader.CheckCompletionBeforeNextRead(Int32)
   at System.Net.FixedSizeReader.ReadCallback(System.IAsyncResult)
   at System.Runtime.AsyncResult.Complete(Boolean)
   at System.ServiceModel.Channels.ConnectionStream+IOAsyncResult.OnAsyncIOComplete(System.Object)
   at System.ServiceModel.Channels.SocketConnection.OnReceiveAsync(System.Object, System.Net.Sockets.SocketAsyncEventArgs)
   at System.Net.Sockets.SocketAsyncEventArgs.FinishOperationSuccess(System.Net.Sockets.SocketError, Int32, System.Net.Sockets.SocketFlags)
   at System.Net.Sockets.SocketAsyncEventArgs.CompletionPortCallback(UInt32, UInt32, System.Threading.NativeOverlapped*)
   at System.Threading._IOCompletionCallback.PerformIOCompletionCallback(UInt32, UInt32, System.Threading.NativeOverlapped*)
The only thing we did a few days ago was enable the Azure Backup integration. I am not sure if this broke the O365 integration as I didn't go back to the O365 tab in the dashboard after installing the Azure backup.
I have spent a considerable amount of time on google, however, majority of the posts talk about Update 1 which disables the password sync service. I have checked and all services are started with exception of Windows Server Essentials Email Service (WseEmailSvc).
The Azure Backup module is working fine and the registry location HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Server\Productivity seems to hold the correct configuration information throughout the various keys.
I am at a loss as to how to proceed with this issue? I have checked but there are no pending updates and I have attempted a server reboot numerous times.
Would appreciate external input if you have seen this issue before or know where we can look to further establish what is going on.
Cheers,
Chiper

I have a similar if not identical situation - I'm currently migrating from WS2012 Essentials to WS2012 R2 Standard w/Essentials role installed. The 'wseemailsvc' service continues to fail over and over, and I am unable to manage O365 accounts from within
the Essentials dashboard on the R2 server.
System Event Log:
Error 7031 - The Windows Server Essentials Email Service service terminated unexpectedly ... [repeats twice]
Error 7034 - The Windows Server Essentials Email Service service terminated unexpectedly. It has done this 3 time(s)
Application Event Log:
Source: .NET Runtime
Date: 2015-04-20 08:27:28
Event ID: 1026
Task Category: None
Level: Error
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name=".NET Runtime" />
<EventID Qualifiers="0">1026</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-04-20T14:27:28.000000000Z" />
<EventRecordID>21137</EventRecordID>
<Channel>Application</Channel>
<Computer>redacted</Computer>
<Security />
</System>
<EventData>
<Data>Application: SharedServiceHost.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.UnauthorizedAccessException
Stack:
at System.DirectoryServices.Interop.UnsafeNativeMethods+IAds.SetInfo()
at System.DirectoryServices.DirectoryEntry.CommitChanges()
at Microsoft.WindowsServerSolutions.MailService.ActiveDirectoryHelper+<>c__DisplayClass3.<SetLocalUserPrincipleName>b__1()
at Microsoft.WindowsServerSolutions.MailService.ActiveDirectoryHelper.InvokeOperationImpersonateWrapper(System.Action)
at Microsoft.WindowsServerSolutions.O365Integration.UpdateO365IntegrationDataTask.CleanUpMappingData(Microsoft.WindowsServerSolutions.O365Integration.O365User[])
at Microsoft.WindowsServerSolutions.O365Integration.UpdateO365IntegrationDataTask.Run()
at Microsoft.WindowsServerSolutions.O365Integration.BackgroundTask.TimerCallback(System.Object)
at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.TimerQueueTimer.CallCallback()
at System.Threading.TimerQueueTimer.Fire()
at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
at System.Threading.ThreadPoolWorkQueue.Dispatch()
</Data>
</EventData>
</Event>
This error is followed immediately by:
Source: Application Error
Date: 2015-04-20 08:27:28
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-04-20T14:27:28.000000000Z" />
<EventRecordID>21138</EventRecordID>
<Channel>Application</Channel>
<Computer>redacted</Computer>
<Security />
</System>
<EventData>
<Data>SharedServiceHost.exe</Data>
<Data>6.3.9600.16384</Data>
<Data>5215ca62</Data>
<Data>KERNELBASE.dll</Data>
<Data>6.3.9600.17415</Data>
<Data>54505737</Data>
<Data>e0434352</Data>
<Data>0000000000008b9c</Data>
<Data>20e4</Data>
<Data>01d07b761ad593b2</Data>
<Data>C:\Windows\System32\Essentials\SharedServiceHost.exe</Data>
<Data>C:\Windows\system32\KERNELBASE.dll</Data>
<Data>5f028783-e769-11e4-80c4-00155d10040b</Data>
<Data>
</Data>
<Data>
</Data>
</EventData>
</Event>
Any assistance with this would be greatly appreciated!
mcbundus

InDesign Stops Responding During Launch

I'm having a problem with InDesign CS2 (v 4.0.5) on a Mac running OSX 10.3.9. It's been working fine for months, but now when I start InDesign, it stops responding during the "Executing Startup Services" phase.
I've deleted all of the preference files for InDesign, as well as the .plist file. I even removed InDesign from the system and re-installed it, but I'm still having the same problem.
Note that all of the other CS2 applications work fine.
Does anyone have any suggestions for correcting this problem?
Thanks

CS2 runs just fine here in XP mode. I suspect the problem is the activation, which can no longer be accomplished becasue the activation servers were shut down. For licensed users of CS2 programs Adobe has posted downloads of versions that do not require activation at Adobe - CS2 Downloads

Use a different SSO Server than the one specified during install.

Hello,
I found on documentation that OAS Portal Configuration Guide would tell me how to use a different SSO Server than the one specified during install. I need to tell an existing Portal installation to use a new Identity Management infrastructure server I installed.
However, documentation does not mention anything related to that. It states that ptlconfig would do the trick, but ptlconfig instructions are not clear on how to accomplish this.
Could anyone that has done this before, help me out? Thanks in advance...

Hello jlubbers,
That is exactly what I am talking about, the ptlconfig does not model SSO components. So I assume it is incorrectly referenced on several points of documentation as a tool to work with SSO parameters or configuration.
I need to know how to tell my Portal to look at the new SSO server. If someone has done it before, please let me know.
Thanks again.

Windows Server Essentials 2012 error code: 2147942403 The system cannot find the path specified

Running Windows Server 2012 Essentials with an external usb 3 drive as a backup device. Using a Vantec hx enclosure with a WD Red drive. Last night the Dashboard saw the drive with about half the 4TB available for backup. A.M., I get "error code:
2147942403 The system cannot find the path specified".
Going to the server desktop, I see a message indicating that the usb device malfunctioned. unplugging it, and plugging it back in, I now have it available via the dashboard.
This has happened a couple times with two different drives in Vantec hx enclosures.
A couple possibilities come to mind:
the enclosures may both be bad...
there is some problem with the system software and external usb drive.
Thoughts?
Suggestions for external enclosures?
Thanks!

Hi,
According to your description, my understanding is that you cannot backup the Windows Server Essentials 2012 and got "error code: 2147942403 The system cannot find the path specified". You found the usb device malfunctioned.
Can you backup the server when you unplugged the usb device, and plugged it back in? If you can backup the server when you replug the usb device, you need to engage the vendor to resolve the hard drive issues.
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Best practices for upgrading Windows Server Essentials 2012 to R2?

Hi,
I need to upgrade my Windows Server Essentials 2012 on an HP microserver to Essentials R2 (specifically the R2 role on Standard rather than as a VM). After a reasonable amount of searching, I haven't found anything online that specifically addresses this in-place
upgrade scenario. Since this is already an Essentials server, it's the PDC in its own domain, etc. Has anyone that's done this upgrade have any experiences or warnings to share?
Thanks,
Sean

Hello there,
There is no upgrade path from Server 2012 Essentials to R2. R2 is not an upgrade, it is a new build. Essentials does not upgrade easily, you will want to perform a migration of the server. This will require additional hardware. You
can possibly backup the 2012 Essentials, build a temp server on workstation hardware just to do the migration from, restore the backup to the new server and then perform the migration to R2.

InDesign stops responding during the Packaging process.

Design stops responding during the Packaging process. It says it will only take a few seconds, stalls, and then stops responding. Please help!

This normally means that the phone has been jailbroken and discussion of jailbroken phones is not permitted in these formus as it is a violation of the Terms of Use. You'll have to find a solution using Google, if you can.
Copied from http://support.apple.com/kb/TS3694#error1015 :
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

Windows Server Essentials Connector stops responding during install Win 7 Pro to 2012 R2

Similar Messages

Maybe you are looking for