Windows Server Functional Level
If we change the functional level of one domain controller. replication will happen in all the domain under single forest or
we have to do manually in all domain under single forest. same question for forest too if we change in one forest it will happen with all forest and under its domain.
Hi prm22mis,
Domain functionality enables features that will affect the entire domain and that domain only.
You can raise the domain functional level on the primary domain controller (PDC) emulator operations master only. The AD DS administrative tools that you use to raise the domain functional
level automatically target the PDC emulator when you arise the domain functional level.
Forest functionality enables features across all the domains within your forest.
You can raise the forest functional level on the schema operations master only. Active Directory Domains and Trusts automatically targets the schema operations master when you raise
the forest functional level.
For more details, please refer to the technet articles below,
http://technet.microsoft.com/en-us/library/understanding-active-directory-functional-levels(v=ws.10).aspx
What Are Active Directory Functional Levels?
http://technet.microsoft.com/en-us/library/cc787290(WS.10).aspx
Best Regards,
Tina
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Similar Messages
-
Windows 2003 functional level and Windows 2012 additional DC installation
I was trying to add a windows 2012 Domain controller('D') to my windows 2003 functional level domain. My domain FSMO roles are running in
two DC's which is on windows 2003 functional level. (schema master, domain naming master and the PDC
running on
server 'A' and RIP pool manager and the infrastructure master running on server B. DC's A and B is running in site London and the windows 2012 DC I am planning to install is in
US. I have a
vpn tunnel between london and the US office.
In US office one of the branch
office i have a DC 'C' which is already replicating to DC 'A' in
london. The DC 'D' i am planning to install is for my disaster recovery office in the US. (DR for the US office)
While adding the 2012 server as an additional domain controller, I am getting the below error message,
"Error determining whether the target environment requires adprep: Validation error: Unable to check the domain upgrade status for
server (server name). Exception: The specified server cannot perform the requested operation \n
Details:Test.Verify Domain upgrade status.ADPrep.Win32Exception,-2147
467259
Find below the print screen. Please somebody help.Hi,
This error my be caused by no active Schema Master in your domain. Please check the active schema owner.
Hope this helps:
http://serverfault.com/questions/436532/fix-error-determining-whether-the-target-environment-requires-adprep-in-windows
Regards.
Vivian Wang -
Restore AD-object on Windows 2008R2 DC with a Windows 2003 functional Level
Hi,
Anyone has experience with this?
We need to know how to restore a single AD-object (eg. a user-object) on a Windows 2003 Functional Level, hosted on Windows 2008 R2
What is the best practice?
Thnx.
PeterPeter,
Use LDP tool to restore deleted objects in AD.
I suggest you to refer below links to know more.
How to Restore Deleted Active Directory Object using LDP.exe in Windows Server 2008 R2 Domain.
Another Technet link for your reference:
http://technet.microsoft.com/en-us/library/ee617262.aspx
Regards, Ravikumar P -
Cisco NAC 4.8 and Windows Server 2008 Enterprise 64bit SSO
Hi,
I try to setup SSO on Cisco NAC 4.8 and Windows Server 2008 Enterprise 64bit, but I can't start Active Directory SSO Service that show error follow below. I saw this error " KDC has no support for encryption type (14)" . Could anyone help me to troubleshoot this problem?
FQDN: active.test.com
Domain Name : test.com
User : ccasso
2011-02-05 12:00:30.225 +0700 WARN com.perfigo.wlan.jmx.adsso.GSSServer
- Server was not running ...
2011-02-05 12:00:30.225 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- Server starting server ...
2011-02-05 12:00:30.225 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- Server is now running ...
2011-02-05 12:00:30.225 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - SPN : [ccasso/[email protected]]
2011-02-05 12:00:30.225 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - building kdc list for domain active.test.com
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - done building kdc list for domain active.test.com
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - KDC(s) :[10.0.240.100]
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - writeKrbFile: writing to file ../conf/krb.txt
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - writeKrbFile: wrote to file ../conf/krb.txt
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - creating login context ...
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - created login context ...javax.security.auth.login.LoginCon
text@5ad7b2
2011-02-05 12:00:40.239 +0700 ERROR com.perfigo.wlan.jmx.adsso.GSSServer
- Unable to start server ... KDC has no support for encryption type (14)
2011-02-05 12:00:50.244 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- Notifying GSSServer status Stopped
2011-02-05 12:00:50.244 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- server is exiting .Hi,
This error means that your DC does not support the encryption method the ACS wants to use.
Usually this happens when you run 2008 Server with 2003 functionality...
You will need to run ktpass.exe according to the DC you are running:
http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/48/cas/s_adsso.html#wp1277452.
For Windows 2008 Server at 2003 Server functional level:
ktpass -princ newadsso/[adserver.][email protected] -mapuser newadsso -pass
PasswordText -out c:\newadsso.keytab -ptype KRB5_NT_PRINCIPAL
HTH,
Tiago
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it. -
What to backup on Ciscoworks lms 2.6 windows server
Howdy,
I need to do a file level backup of a Ciscoworks lms 2.6 windows server and want to know what i need to backup on the windows server file level?
Basically what partitions, folders, files etc?
Thanks..Application-wise, just backup NMSROOT (e.g. C:\PROGRA~1\CSCOpx). To get the dynamic stuff, you will also need a full Windows Registry backup as well.
Typically, when customers ask about FULL LMS server backups we recommend they first do an LMS data backup using the Common Services > Server > Admin > Backup interface. Then, take the backup directory and back that up to your archive server. Then do a full server backup (i.e. file system backup).
On a restore, first restore your full server backup. Then, use the LMS NMSROOT/bin/restorebackup.pl script to restore the LMS data backup you took. This will ensure database integrity. -
Dear Support Team,
i am having the error ''The specified forest functional level is invalid. "Lync Server" requires forests running in Windows 2003 mode or higher'' from lync 2013 during the schema master prepare on windows server 2008r2 and my forest functional
level are 2008r2.. so can you help me please...?Dear Support Team,
in my network there are one forest and two domain controller (primary and secondary).. my domain functional
level is windows server 2008r2.. but i am still receiving error.. when i hit the run button for schema prepare its says:
ServerSchemaPrepareTask execution failed on an unrecoverable error.
and when i open log it sasys:
Error: The specified forest functional level is invalid. "Lync Server" requires forests running in Windows 2003 mode or higher.
kindly help me -
Windows server domain group membership with functional level 2003 - windows API
Hello,
I am a programmer trying to get members of a global domain group using windows server 2008 enterprise edition,
in the past there wasn't a functional level 2003 on windows server, but when 2003 functional level appeared a new features were added like adding
a global group as a member to another global group in the domain,
in the past the API written could get the members if the member was a user, but it can't get a member if it was a global group.
I am using this API "NetGroupGetUsers" to get a members of a global domain group, and it gets the users but it doesn't get the
members if they were global groups...
I tried another API "NetLocalGroupGetMembers" it is getting a global group as a member but it is working only if the owner group was a local group on the server
or on another machine that is added to the server, but this API doesn't work if the owner group was a domain global group.
My question is how to get members of a global group including the members that are global groups too???
Thanks,
- Shomaf> I am using this API "NetGroupGetUsers" to get a members of a global
This interface is based on Win 2000, and since Win 2000 did not support
global group nesting, this interface does not, too...
> domain group, and it gets the users but it doesn't get the
> members if they were global groups...
You should use
http://msdn.microsoft.com/library/aa706032.aspx - and
don't forget to track down the nestings :)
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :)) -
What is the effect if I Raise my domain functional level to Windows Server 2012 R2 ?
Hi,
my current servers:
Domain Controllers= Windows Server 2012 R2 (current domain functional level is windows 2008 R2)
Mail servers= Exchange 2010 SP3 on Windows 2008 R2
Lync= Lync 2010 on Windows server 2008 R2
What is the effect if I Raise my domain functional level to Windows Server 2012 R2 ?
I am very worried about Exchange & Lync if we do this action
please adviceDo not raise the forest functional level higher if you have or will have any domain controllers running
an earlier version of Windows Server , which is (windows Nt4.0, Window 2000 or windows 2003)
but as a matter of fact I dont see any of those in your network so you can easily upgrade the funtional level without any issues
Listed below link has the table which shows the effects of upgrading the domain functional levels to Windows 2012
http://technet.microsoft.com/en-us/library/understanding-active-directory-functional-levels
http://www.arabitpro.com -
Forest and domain functional level Windows Server 2012 R2 - what's new?
Hi, I still can't find documentation about the new domain and forest functional levels in WS 2012 R2.
a) "What's New in Active Directory in Windows Server 2012 R2"
http://technet.microsoft.com/en-us/library/dn268294.aspx
No word about it.
b) "Understanding Domain and Forest Functional Levels"
http://technet.microsoft.com/en-us/library/cc771294.aspx
Still WS 2012.
ThorstenFor what's New in Active Directory in windows server 2012 R2,
Read the following Blog
http://policelli.com/blog/archive/2013/06/27/whats-new-in-active-directory-in-windows-server-2012-r2-preview/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer". -
Hi
Anyone knows whether Windows 2008 R2 domain controllers with Windows 2003 forest functional level will still be Supported after Windows 2003 support ends in July 2015 ?
ThanksWhen Windows Server 2003 support ends, you should not have a Windows Server 2003 Domain Controller running if you would like to be supported by Microsoft. This means that there will be no reason to have a DFL or FFL that is lower than Windows Server 2008.
So, if you are keeping Windows Server 2003 FFL to keep DCs running Windows Server 2003 then this is not supported.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
Logon failure after upgrade Windows 2003 domain functional level and schema
Before upgrade:
Windows 2003 Std server: Domain functional level 2000, Schema verion 30
Crystal Report XI R2: Authentication: Windows AD
Logon OK.
After Upgrade:
Windows 2003 Std + Windows 2008: Domain functional level 2003, Schema verion 44
Crystal Report XI R2: Authentication: Windows AD
Logon Error: An error has occurred: java.lan.NullPointerException
Is it a Tomcat problem? OR Java runtime problem? OR XI R2 problem?
Anyone can help to fix it!? Thanks!!OK, I try again in the testing lab and simplify the combination. We only consider Windows 2003 ONLY.
Before AD upgrade:
AD/Domain Controller: Windows 2003 Std server: Domain functional level 2000, Schema verion 30
Crystal Report XI R2: run on Windows 2003 memeber server
Operating OS: Windows XP/Vista/7: Authentication: Windows AD
Logon OK.
Upgrade cmbination 1
Step 1:
Upgrade Domain controller: Windows 2003 to Windows 2003 R2 (Domain functional level 2000, Schema verion 31 )
Crystal Report XI R2: run on Windows 2003 memeber server
Operating OS: Windows XP/Vista/7: Authentication: Windows AD
Logon OK.
Step 2:
Upgrade Domain Functional Level: Windows 2003 R2 (Domain functional level 2003, Schema verion 31)
Crystal Report XI R2: run on Windows 2003 memeber server
Operating OS: Windows XP/Vista/7: Authentication: Windows AD
Logon Fail
Logon Error: An error has occurred: java.lan.NullPointerException
Upgrade combination 2
Direct upgrade Domain Functional Level: Windows 2003 (Domain functional level 2003, Schema verion 30)
Crystal Report XI R2: run on Windows 2003 memeber server
Operating OS: Windows XP/Vista/7: Authentication: Windows AD
Logon Fail
Logon Error: An error has occurred: java.lan.NullPointerException
In this testing, we can conclude that the Domain Functional Level upgrade from 2000 to 2003. The MI logon will fail.
Q1. Crystal Report XI R2 cannot run on Windows 2003 server (Domain Functional Level: 2003)?
Q2. If Crystal Report XI R2 can run on Domain Functional Leve: 2003, how to fix our problem?
Do you have any idea to help us? Thanks!
Edited by: Initiator on Jul 20, 2010 6:22 AM -
Exchange Server 2003 SP2 - Forest and Domain Functional Level Limitations
Hi All
Bit of a legacy question and theres not much clarity out there..
I need to confirm the highest DFL and FFL Supported by Microsoft for Exchange 2003 SP2?
We currently have a mix of 2003 R2 and 2008 R2 domain controllers with the FFL and DFL currently set at 2003 R2.
The plan is to move to Exchange 2010 in the very near future, so the question is do we need to wait until we upgrade to Exchange 2010 Before upgrading the DFL and FFL to 2008 R2?
From what Ive read we will need to complete the Exchange upgrade first before moving forward with the functional level upgrades..
Thanks in advance
BullHi Bull,
As Ed mentioned, Exchange server 2003 and Exchange 2010 support Windows Server 2003 domain functional level and Windows Server 2003 forest functional level, also supported in higher environment.
More details about it, please refer to “Supported Active Directory environment” section:
http://technet.microsoft.com/en-us/library/ff728623(v=exchg.150).aspx
Note that we cannot add new DCs which are the less version of Windows Server
cannot be added to the domain or forest. More details about
the Impact of Upgrading the Domain or Forest Functional Level, for your reference:
http://blogs.technet.com/b/askds/archive/2011/06/14/what-is-the-impact-of-upgrading-the-domain-or-forest-functional-level.aspx
Best Regards,
Allen Wang -
Windows Server 2012 R2 - New Forest - Lowest forest fuctional level 2008
Hi,
I just setup a new win2k12 r2 forest. I notice the lowest forest functional level that I can select is only Windows Server 2008. How come 2003 is not on there when it is supported in the document below?
The following table shows the features that are available at each forest functional level.
http://technet.microsoft.com/en-us/library/understanding-active-directory-functional-levels%28v=ws.10%29.aspx
ThanksWindows Server 2003 is in extended support and even the extended support will end next year - So setting up Windows Server 2003 DCs in a brand new forest of this date doesn't make sense (or at least it's not what Microsoft want you to do)
Enfo Zipper
Christoffer Andersson – Principal Advisor
http://blogs.chrisse.se - Directory Services Blog -
Hello,
I have two DC,:
first Windows Server 2008, second Windows Server 2012 R2,
AD works in forest functional level 2008
Workstations working in Windows 8.1 OS cant register to DNS with warning:
The system failed to register host (A or AAAA) resource records (RRs) for network adapter
with settings:
Adapter Name : ...................................................
Host Name : ...................................
Primary Domain Suffix : ....................................
DNS server list :
Sent update to server : <?>
IP Address(es) :
The reason the system could not register these RRs was because the DNS server contacted refused the update request. The reasons for this might be (a) you are not allowed to update the specified DNS domain name, or (b) because the DNS server authoritative for
this name does not support the DNS dynamic update protocol.
To register the DNS host (A or AAAA) resource records using the specific DNS domain name and IP addresses for this adapter, contact your DNS server or network systems administrator.Hi,
Functional levels determine the available Active Directory Domain Services (AD DS) domain or forest capabilities. They also determine which Windows Server operating systems you can run on domain controllers in the domain or forest. However, functional levels
do not affect which operating systems you can run on workstations and member servers that are joined to the domain or forest. Set the domain and forest functional levels to the highest value that the environment can support, in order to use as many AD DS features
as possible.
You may reference SenneVL’s suggestion, and use ipconfig /registerdns
on the workstation to confirm that if the DNS record can be registered.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Cannot Raise Functional Level in 2003 server
Replacing 2003 server to 2008 R2 and inorder to migrate ADDS tried to raise the domain functional level to "Windows 2003" but the raise button has been disable for to click on it.
After executing this command i found: :
\netdom query fsmo
Schema Owner DC1.domain2.net
Domain Role Owner DC1.domain2.net
PDC Role DC1.domain2.net
RID Pool Manager DC1.domain2.net
Infrastructure Owner Dc1.domain2.net
:\\repadmin \options
Current DC options: (none)
Maybe you are looking for
-
[solved] firefox and flash
From today I doesn't see flash video in firefox. Any idea? Last edited by ugaciaka (2011-05-03 17:57:16)
-
Por favor alguien me allude no puedo instalar buscar mi iphone por q tengo la vercion 4.3 y no quiero actualizar mi ios
-
Elements will not open after viruses were removed
First time I tried to open with a photo attachemnt to an eamil I had a message flash accross the screen saying I could not use the program and it needed to be reinstalled. My question is do i "uninstall" it before I "reinstall" it and if I do do I lo
-
[Solved] Bumblebee broken after installing systemd
Hi Arch Users! I recently wanted to give systemd a try and made the switch using the Arch's Wiki as a guide. Everything was fine except when I tried running VLC through Bumblebee. First error from optirun was that it could not connect to Bumblebee de
-
CE 7.1 Trial - Differences between the versions
Hi there, I would like to check out the new BPM Feature within the NetWeaver CE, but I'm a little confused about all the different versions available. There is a CE 7.1 Trial SP 3, CE 7.1 Trial SP 5 and a CE 7.1 Trial EHP 1... Whats the current Ve