Windows Server - Oracle 9i and Linux Client ?
Hi all,
Is it possible to have Oracle Database working on Windows 2000 Server and its client i.e. forms/application running on Linux environment. If so, then will my Developer6i work for installation of client in Linux. And if it works, then how can I install it on Linux.
Or theres any other version of Developer for Linux.
My configuration is as under.
Server.
OS - Windows 2000 Server
DB - Oracle 9i
Client.
OS - Linux
Developer 6i -how can I install n make it work for me ?
Thanx
Zaaf.
Zaaf,
This forum deals with Connectivity solutions to non-Oracle systems. Your question would be best posted on the general iAS forum.
Similar Messages
-
Windows Server 2008 R2 and Windows 7 DNS Problem
Hi,
I have a DNS Server hosted in Windows Server 2008 R2 and our clients are using Windows 7. All are working fine then suddenly there are times that our client cannot access our internal site and cannot connect with our IM which is also hosted in the server.
Tried to ping the server's IP but got this result:
Ping request could not find host .com. Please check the name and
try again.
NSLookup works fine. Tried to use the ip address instead of the domain name and it works. Resetting network connection seems to resolve the issue but we cannot do it all the time especially when we have hundreds of computers in our office. Anyone have ideas
regarding this?Hi,
“Resetting network connection seems to resolve the issue but we cannot do it all the time especially when we have hundreds of computers in our office. Anyone have ideas regarding
this?”
It seems is the client IP address conflict, it may cause by your DHCP Conflict Detection Attempts value setup is not appropriate. You can try to set Conflict Detection Attempts
to a value other than 0.
More information:
Detect and Avoid IP Address Conflicts
http://technet.microsoft.com/en-us/magazine/ff606371.aspx
Hope this helps
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
I am using a window 7 professional service pack 1 and I purchase REMOTE DESKTOP SERVICES CLIENT ACCESS LICENSES FOR MICROSOFT WINDOWS SERVER 2012 STANDARD AND DATACENTER. but the seller did not send me any installation CD or instruction
on how to use it.
Please how can I use it on my window 7 professional service pack 1.
Thank you.Though Bill is absolutely correct for most CALs, Remote Desktop Services does have its own special licensing server. I haven't installed one on 2012, yet, but here is a step-by-step guide for 2008.
http://technet.microsoft.com/en-us/library/dd983943(v=ws.10).aspx
Here is a lab guide for 2012 -
http://technet.microsoft.com/en-us/library/jj134160.aspx
But, the explanation of your environment begs the question - what are you trying to do? You say you have a desktop OS and you are talking about Windows Server products. In that light, your question does not make a lot of sense.
. : | : . : | : . tim -
Installing oracle 10g and 11g client on the same Linux RHEL 5.4 host
Is it possible to install Oracle 10g and 11g client on the same Linux RHEL 5.4 host and have the application switch between 10g and 11g? and how would the 10g and 11g be installed?
Thanks for your reply.
Typeically if 10g is installed in /home/roacle/product/10.2.0, are you saying that for 11g, it would be /home/oracle/product/11.0.0 ?
How about switching the application? Does changing the ORACLE_HOME and PATH environment variable setting enough ? Let's say from
ORACLE_HOME=/home/oracle/product/10.2.0/client_1 to /home/oracle/product/11.0.0/client_1 -
Print services and linux clients
Hi,
I'm installing a Windows Server 2012R2 as a printer server. It must give support to all kind of clients (windows, os x and linux).
Then, I must use event id 307 and 805 to count printed pages.
My question is related with event 307 and linux clients. I'm asking linux users to configure their CUPS to connect using samba printer, for example, \\server\printer001 but when I check event id, I get no file name (Remote Downlevel Document), and most important,
I get 0 printed pages in param8. I did some testing using IPP, but I were not able to configure a printer in linux (couldn't manage to make linux clients to validate with their domain user account when using IPP). I tried configuring printer on server to render
jobs in server with no luck. Tried PS drivers just in case it was easier to CUPS to send info to server, but no luck either.
So, basically, is there any way to configure server (or linux client) so I get page count in event 307 in printservice? If I must configure IPP printing, how may clients configure their printers to validate using domain accounts?
Thanks!Hi,
Sorry for delaying in reply.
Linux clients see page count. I've paused printing and checked some documents. Property page from a linux client document shows as this:
Documents sent from windows clients show same but they've document name and page count.
SPL archive copied from spooler printer on Windows server shows that info is present too:
%!PS-Adobe-3.0
%%Creator: cairo 1.9.5 (http://cairographics.org)
%%CreationDate: Thu Jun 19 14:15:48 2014
%%DocumentData: Clean7Bit
%%LanguageLevel: 2
%%DocumentMedia: Letter 612 792 0 () ()
%%Orientation: Portrait
%%For: (testuser)
%%Title: (Phaser 5500 Descarga del archivo)
%RBINumCopies: 1
%%Pages: (atend)
%%BoundingBox: (atend)
%%EndComments
%%BeginProlog
%%BeginFeature: *JobPatchFile 1
% Default Definitions
userdict /xerox$pagedevice <<
/MediaClass null
/MediaPosition null
/PageSize [612 792]
/TraySwitch true
/ManualFeed false
/ImagingBBox null
/ProcessColorModel /DeviceGray
/DeviceRenderingInfo currentpagedevice 1 index get 1 dict copy
/PostRenderingEnhance false
/Install {
xerox$old_install xerox$flip {
currentpagedevice /PageSize get aload pop translate 180 rotate
} if
>> put
<--- snip snip REMOVED FOR SIMPLICITY snip snip ------>
showpage
%%Trailer
%%Pages: 1
%%BoundingBox: 0 0 612 792
%%EOF
Linux client used official PPD file downloaded from xerox webpage for linux
cups. Windows server uses Xerox Global Print Driver PS 5347.600.0.0 type 3 with
Render print jobs on client computers as suggested by Alan before.
Any other idea? -
Dual boot Windows Server 2008 R2 and RHEL 7 Server?
Do someone know how can I setup dual boot of Windows Server 2008 R2 and RHEL 7 Server?
I've tried to install Windows first, then shrink, then install RHEL there.
But GRUB2 loader doesn't offer to start Windows, only Linux in the menu. (probably Windows partition need to be added to grub2 somehow)Hi Oleg Vazhnev,
Please refer to following article and check if can help you.
How
to add Vista/Windows 7 partition to Grub 2 (Ubuntu 9.10, Karmic Koala)
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
Meanwhile, please also refer to following video and check if can provide you more details of installation.
Install RHEL 7 in Legacy Mode (Dual Boot Windows Server
2008 R2)
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu -
Do we need CALS for windows server 2008 R2 and 2012 R2 if 2008 R2 is just a stepping stone?
We currently have a server on Windows Server 2008 RC SP2 64-bit with approximately 20 clients.
We want to upgrade to Windows server 2012 R2 but first need to upgrade to Windows 2008 R2 to allow us to do a straight upgrade.
Is it possible to upgrade to Windows Server 2008 R2 with the 5 CAL's included and then upgradeto 2012 R2 and install 20 new CAL's and keep all users accounts and domain PC's the same?Ok sorry for using the wrong terminology... I was under the impression for each client (Computer) connecting to the server we will need a CAL (Client Activation License) in order for the computer to be a domain PC on the server. Do I need 20 CALS's
for Windows Server 2008 R2 and then another for Windows Server 2012 R2 if we are only upgrading to 2008 R2 to be able to upgrade to 2012 R2 without having to do a clean install.
For WindowsServer (Standard edition or Enterprise edition or DataCenter edition), a Client Access License (CAL) is required for each device (if you're using the per-Device CAL licensing method), or, is required for each user (if you're using the per-User
CAL licensing method).
(whether you use per-Device, or per-User, is up to you, it comes down to cost).
CALs are version-specific (to a point) - i.e. if you purchased WS2008 CALs for your 20 devices, for use with your WS2008 server, and you are now upgrading that server to WS2012, you need to upgrade your CALs.
If you are adding a second server which is WS2012, and you are keeping your WS2008 server, you need to upgrade your CALs (because you only purchased WS2008 CALs which don't grant you the rights to connect to the newer server).
If you were to install your second server as WS2008, you wouldn't need to purchase additional CALs, because as long as the version is the same, a single CAL grant you access to unlimited server (of the same version).
CALs can be tricky to correctly license.
Here's some introductory reading:
http://www.microsoft.com/licensing/about-licensing/client-access-license.aspx#tab=1
And, none of this relates to the technical aspects of product installation/configuration at all (e.g. clean install vs. upgrade).
Windows Server CALs are not license keys/tokens/files which you install/load/download - Windows Server CALs are quite literally paper-based (just like a drivers license or car registration). You are required to have them, to be correctly licensed, but, you
don't physically do anything with them to own/drive a car.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
Windows Server 2008 x64 and Crystal Reports Server Embedded
We're attempting to certify our software with Windows Server 2008 x64 and want to know the best way to configure both the server and client of Crystal Reports Server Embedded. Currently, our software is certified against Windows Server 2003 x86, and we install Crystal Reports Server Embedded XI Release 2 (no SP) on the application server, and we deploy the Crystal Reports .NET merge modules for XI Release 2 (no SP) on any client machines.
I believe I am correct in stating that no version of Crystal Reports Server Embedded officially supports Windows Server 2008 x64 (based on some other forum postings) until SP1 comes out (which I don't think has happened at this point). If that is true, we can live with installing the RAS on a separate Windows Server 2003 x64, if that's even possible. With that said, can we even get our Windows Server 2008 x64 running with the latest Crystal Reports 2008 .NET merge modules? We've tried many different configurations between CR XI R2 SPs and CR 2008 for both client and server and have very little luck (either it won't install correctly because of x64 or missing .cabs, etc.) on both the client and server side of things.
Can someone suggest the optimal configuration when Windows Server 2008 x64 is in the mix, noting that we can use a secondary Windows Server 2003 (x64 preferred but can fallback to x86)? Or do we have to wait for Crystal Reports Server Embedded 2008 SP1 to be released, and if so, does anyone know of the date?
Thanks,
Ross BeehlerCRSE 2008 is a 32 bit app, it works on 64 bit OS's but all parts must also be running in 32 bit mode.
-
Server Virtualization with Windows Server Hyper-v and System Center Expiration
Prometric says: STATUS: Passed, EXPIRATION: 22-03-2015.
Does this means that I have to take the exam again before 22-03-2015?Hi, Daniel.
Let me understand this exactly.
You log into http://register.prometric.com/ and then on the left side, you click
Candidate History to see your list of exam attempts.
Under the Status Expiration column, all the way to the right, it should read
Passed and the date/time you passed it. Are you sure it reads
2015 and not
2014? Is there also
another date on that same row/column for this exam's expiration below the date you passed it?
On the Prometric site, this column is supposed to display the date you passed it and optionally the date it expires for many non-Microsoft exams.
Typically for Microsoft exams, this final column will state the day you passed the exam and
not an expiration date.
As well, by passing this exam, I know that you also earned a Specialist: Server Virtualization with Windows Server Hyper-V and System Center certification title. This certification does
not expire.
Exam 74-409:
http://www.microsoft.com/learning/en-us/exam.aspx?ID=74-409
Have you looked at your MCP transcript to see if a expiration date is mentioned there? No matter what it states on the Prometric site, your transcript will describe any exam/certification expiration dates much
more accurately.
Also, I understand that the 74-nnn series exams are Microsoft partner exams. Perhaps they
do require recertification to keep up to date with the latest certifications.
If your transcript does really contain an expiration, you can contact Prometric about this and see if they can help you understand it. Here is the Prometric contact information for Microsoft exams:
https://www.prometric.com/en-us/clients/pages/contact-numbers.aspx?client=microsoft
As well, if they can't help you, you can call/email Microsoft Learning Support with information found here:
http://www.microsoft.com/learning/en-us/help.aspx.
Finally, if you want to be sure how this exam works against your employer's Microsoft partnership, you can log in and view the Partner support page here:
https://partners.microsoft.com/partnerprogram/help/en-us/whgdata/whlstt14.htm#14
I hope someone can help you get this cleared up.
Good luck!
Best wishes, Davin Mickelson -
The Windows Server 2012 R2 and Windows Server 2012 BranchCache Deployment Guide is now available for download in Word format in the TechNet Gallery at
http://bit.ly/1pYZT3F
Thanks -
James McIllecehello again,
meanwhile I was lucky to find this article about Idenity Mapping in TechNet in the Storage Team Blog:
http://blogs.technet.com/b/filecab/archive/2012/10/09/nfs-identity-mapping-in-windows-server-2012.aspx
Likely to be overseen at the end of one paragraph it says:
"Client for NFS does not support NFS V4.1 in Windows 8 or Windows Server 2012"
Question : Is this an official statement and is it still valid with most recent
Windows Server 2012 R2 that NFS client does NOT support NFSv4.x ??
thanks - Rainer -
Does Windows Server 2012 support Remote Desktop Client 6.1?
Hi,
Does Windows Server 2012 support Remote Desktop Client 6.1? IU can't find a link anywhere on the Microsoft site to confirm this!
Thanks,
Jimthis should help you
http://social.technet.microsoft.com/Forums/windowsserver/en-US/b664ddaf-6c11-49e2-8a69-0df3b8ef13a1/server-2012r2-rds-farm-with-xp-and-windows-vista-clients?forum=winserverTS -
I am having difficulty: we are running a windows server 2003 - mail and outlook support 2007 and upwards, how do I get the brand new apple machines to work with the 2003 version of server
I may be way out, but do you know about this product, would it help integrate the Macs for you.
https://www.thursby.com/sites/default/files/images/ADmitMacv8_SPD.pdf -
I have windows server 2012 R2 and install active directory
My question is I install active directory in windows server 2012 R2 and create Group Policy. ( These set-up is only for test)
Have not registered domain only install active directory to test.
So the problem is when I created Group policy for my user and put software restriction policy but its affected to my administrator accounts too, No when I open VMware (install Virtual Machine windows XP) and start os then its shows you can not user this
software as you restricted from installing software (Something like that don't know exact Error). I could not start installed Virtual Machine.
Please give me a solution for this.
This is the setup for a test use only so their not big environment connect with my pc.
Thanks in advance.
Regards,
KrunalHi,
The following article is talking about creating and managing Group Policy on a Windows Server 2012:
http://www.thomas-krenn.com/en/wiki/Creating_and_managing_a_Group_Policy_on_a_Windows_2012_Server
As Darren Blanchard mentioned, if you want to apply the GPO, you could link it to an OU that contain the computer or user.
Group Policy Overview
http://technet.microsoft.com/en-us/library/hh831791.aspx
Please feel free to let us know if you need further assistance.
Regards.
Vivian Wang -
Can I connect to a windows server to download and view files and return to server???
I use the FTP on the Go Pro app to do just this. I don't know what kind of servers I connect to though but I've not had any problems connecting.
I connect and select a file. I update the file, then tap save. The file is uploaded back to the server and the original version is ved just in case I might need it. -
hi
I Have
Windows server 2008 R2 and Install Active Directory
Install and configuration for windows server 2008 PDC (Primary Domain Controller) and BDC (Additionall Domain Controller)
Error
A security Package specific Error Occurrred. would you like to add it anyway
and
Access Denied Console Other Domain AD
and Nslookup
C:\Users\admin>nslookup pdc
Server: bdc.*.*
Address: 10.0.X.X
Name: pdc.*.*
Addresses: 10.0.1.11
10.0.X.XHello,
your description is a bit confusing. You get the error message when you try to add the other DC to the DNS management console on one machine?
Both DCs belong to the same domain according to your description?
Please post an unedited ipconfig /all from both DC/DNS servers here.
BTW: PDC/BDC concept is gone since the start from AD with Windows 2000 Server. All DCs are the same, difference are only the FSMO roles, still that can be held from any DC in the domain according to some rules.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://msmvps.com/blogs/mweber/
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Maybe you are looking for
-
Java stack on working on node 1 of windows cluster
Hi All, I am trying to install SAP ECC 6 in the Windows cluster , already installed CI , ABAP+java in node 1and running sucessfully, after making creating group in oracle fail safe server and performing steps of cluster installation . Now when i am t
-
Trying to send my iPhone 5 in for repair, keep getting this error: "We're sorry, but we are unable to complete your request at this time. Please try again in a few minutes or start over now. (system.99)" Tried using different browsers, and waiting fe
-
Error message while downloading a tv show now it wont play full episodes. Suggestions?
Some of the episodes are even unwatchable/clickable and all but two have the exclamation point ! in front of it. What should I do?
-
Different currency amount showing in payment wizard to invoice
Forum, I have a scenario where an AP Invoice has been posted with a currency of GBP. When running through the payment wizard however it shows the amount to pay this invoice in euros. I have checked the payment method and this is correctly configured
-
Exception CX _ OS _ OBJECT _ NOT _ FOUND in Actions
Hi Iam executing an action which will confirm the product from Contracts Screen(CRM_ORDER). The confirmation is also being done. But after the confirmation is done,the above exception is being triggered and dump is being achieved. Is there any