Windows server update services installation failed the update could not be found

Hi everybody...
I have tried to install WSUS Role on windows 2008 r2 ent server. its says windows server update services installation failed.
actually the wsus role for SCCM 2007, asper the prerequesite i have finished all other steps, only wsus role is pending.. please help..

Thanks FinMaky,
The keys are:
(1) to delete WindowsUpdate registry keys, and then
(2) enable/restart Windows Update services.
(3) also to make sure there's no WSUS policy defining update server is in place
This resolves my issue.
BIG THANKS!
Tuesday, April 05, 2011 1:53 PM
Reply
|
Quote
|
Report
as abuse
FinMaky
---Pat

Similar Messages

I'm trying to import a cd to my mac air from my pc. I've downloadedAbout the Migration and DVD/CD Sharing Update. The mac recognized the pc and the cd but fails to play or import it. i get the message the cd could not be found. Suggestions?

I'm trying to import a cd to my mac air from my pc. downloadedAbout the Migration and DVD/CD Sharing Update. The mac recognized the pc and the cd , but fails to play or import it. i get the message the cd could not be found. Suggestions?

You can't share/play a music CD using Remote Disk. It's a limitation that Apple built in.
"MacBook Air and Mac mini do not support playing DVD movies or audio CD media with Remote Disc."
Remote Disk is limited to data transfers.
You will have to use the MBA external superdrive, or another compatible external DVD device hooked directly to the Macbook Air.
Otherwise, you will need to rip the CD's contents using your PC and transfer the music as data files.

HT201210 i keep getting this message when trying to update my old 3g-"the iphone could not be restored-an unknown error occurred (-1)-any ideas? anyone?

i keep getting this message when trying to update my old 3g-"the iphone could not be restored-an unknown error occurred (-1)-any ideas? anyone?

i have done that
same result
the phone has a sim in it that is not active. does this cause the fault in question?

Installed new update iTunes Saturday - My file directory could not be found, so reset the directory path, 'it' asked me if I would like 'it' to re organise filing, I selected yes - Many tunes have been duplicated, some have disappeared. Any help?

Hi,
Installed a new update iTunes Saturday - My file directory could not be found, so I reset the directory path, and 'it' asked me if I would like 'it' to re organise my filing, foolishly (as a beginner, without checking) I selected yes - Many tunes have been duplicated, some have disappeared? Trawled through lots of misleading help files, mailed friends, tried many back routes into Apple web sites and they all wasted my time. Can anyone help?
I have discovered since then, that this resorce has been down over the weekend, which probably explains why I have had so many contradictory responses, so apologies if you all know what the prolem is.
My question is, my TIME MACHINE (which has not been used yet) was tried but looked nothing like that of the U Tube demo, so I am assuming that it needs setting up, however, it has been saving, I just do not know how to recover the data. Can anyone help?
Regads,
Cyfrommayo

(If you have a Time Machine backup, go to your User folder/Music/iTunes and select iTunes. Enter Time Machine and go to a backup of iTunes before the above happened. Then select 'Restore' on the bottom right.)
Eric,
Many thanks for your help.
Apologies for not being as skilled as you. I am unable to see what you are saying, can I ask, should I be in TIME MACHINE when I go to User folder/Music?iTunes or iTunes or Finder?
Cyfrommayo

Failed to read data from report file Reason: The table could not be found.

BO Enterprise XI R2, cannot publish crystal reports using the publishing wizard.
Failed to read data from report file Reason: The table could not be found.
Any ideas to get around this would really help out.
Regards

Connection used Views, ODBC System DSN is setup properly.
Approach for import from business view manager and import wizard. both methods failed to import the Business View and underlying reports.
I figure I may have imported the Business View wrong? From Business View Manager I exported from my dev server then imported to prod server.
Apparently I learned exporting my business view also includes the Data Connections that the Business Views are dependent upon.
So which ever folder you specify it copies it there. Originally the all Data Connections Resides on the root folder. To return it to the original location. I deleted what I had exported. Exported this time to the root folder, then only deleted the business views, foundation, elements. Then exported again to the folder where I intended then only deleted the Data Connection.
Makes any sense? So I then had to re point the business views and all the dependent objects to the data connection that resides in the root folder.
I tested the connection, it works fine. I properly updated my crystal reports to the business view in production. Did a sample extract it works as expected.
However when i try to publish, either from Crystal or Publish wizard i get the same error?
As a work around i am thinking, after updating the business view in the crystal reports, shall i re map the fields?? or reexport the business views again?
Any help will be surely appreciated.

MSSGE attempting to copy to disk "Ipod" failed the disk could not be read..

What is going on with this alert message " Attempting to copy to the disk " Ipod" failed the disk could not be read from or written to." I down loaded a song from Itunes and all of the sudden I get this message and Itunes went crazy, it wouldn't eject my Ipod, I took it to apple and they restored my Ipod saying it was fine, then I get home and I can't put alot of songs in my library back on it, itunes keeps repeating that message. I had no problem putting them on before. I have uninstalled both Itunes and Ipod updater numerous times to no avail HELP!

See if any of the troubleshooting steps in this article help: "Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod

" Attempting to copy to disk "---- ipod" failed.The disk could not be.... ?

hello every one and happy holidays.
" Attempting to copy to disk "---- ipod" failed.The disk could not be read from or written to. "
I have this problem and I can find a solution
I had try every possible tip
including.
- reset many times
- restore
- diskwarrior
- disk utility
- erase disk
- erase disk Zero out data
- erase disk 7-Pass Erase
- iPod Updater 2005-03-23
- iPod Updater 2005-09-06
- iPod Updater 2005-09-23
- MacOSXUpdateCombo10.4.3
- iTunes6.0.1 reinstall
the ipod works just fine and operates properly
it just does NOT whant to sync with itunes
I know I'm not the only one with this issue
there are many post in regard of this problem
I believe that this is a software issue and not a hardware
please comment and give any tip for me and the other people with this problem
thank you
sam
dual 800 G4 Mac OS X (10.4.3)

I had the same problem. And to think I actually HESITATED at installing the update. Oh wait... this happened AFTER the update. Funny how often that happens, eh? But I digress...
Anyway, I had two errors- initially the iPod stated my music library was somewhere else, and did I want to sync to that library. When I said yes, it reverted then to the "attempting to copy to disk"error. Further, iTunes showed that my iPod on the iTunes was EMPTY. However, my actual iPod hadn't lost any data. Confused yet? So am I.
*Last ditch effort- I went back in, and updated all my permissions, did a permission repair and then a permission verify.
* Also did a disk verify on the iPod to make sure it wasn't sick.
*I also drug a new song into my library.
*Changed from the USB plugin to the firewire. (Although I did this earlier in the day, and hadn't seen a noticeble change)
* Opened the bottle of Sauvignon Blanc. (should have done that a few hours ago)
When my first pop up asked about did I want to sync to the mystery persons library, I said yes. (At the worst, I have all my music and could reimport all 30G of it, if necessary.) And immediately, the sync began, and began appropriately. However, it IS re-syncing every single song I had on the iPod to begin with.
I suspect something nasty happened in the iTunes update, ever since the intel thing happened, the updates have been a bit sketchy. I really like Apple products, but I've gone through 3 iPods due to software meltdowns, and it's a bit frustrating.
Good luck!
iMac G4 Mac OS X (10.3.9) iPod scroll wheel,
iMac G4 Mac OS X (10.3.9) 3rd generation I think...

Error message on boot up: The file could not start C:\Windows\SysWOW64\vidperf.dll. The path could not be found?

C:\Windows\SysWOW64\vidperf.dll The path could not be found? What does this mean? How do I re-install this packet and eliminate this error message?
Dell Laptop inspiron 1525 with Windows 7 Premium with open rights.

P
Just to eliminate the possibility please run Malwarebytes
Please download the free version of Malwarebytes.
Update it immediately.
Do a full system scan
Let us know the results at the end.
http://www.malwarebytes.org/products
Wanikiya and Dyami--Team Zigzag

The share operation "master file" has failed. the operation could not be completed because an error occurred creating Frame 93164 (error-1). how can i find the frame?

The share operation "master file" has failed. the operation could not be completed because an error occurred creating Frame 93164 (error-1). how can i find the frame?

https://discussions.apple.com/thread/6219522

HT1449 copying files failed. the disk could not be read from or written to.

Im moving my iTunes to an external hard drive. Its moved about half already and Im now getting this error. I have no idea what file its getting stuck on so I cant remove that file. When I restart it it will say preparing to copy then I get the error right away. I dont want to delete the extrenal and start over if I dont have to.

Ive already changed the location for my itunes media to my extrenal hard drive so when i click to consolidate files Im getting the error
copying files failed. the disk could not be read from or written to

When I try to save a doc to my server I sometimes get this: The document could not be saved. There was a Macintosh system error (-5000). What does it mean?

When I try to save a doc to my server I sometimes get this: The document could not be saved. There was a Macintosh system error (-5000). What does it mean?

What kind of file are you saving, and what sort of clientserver setup do you have?
If you're using MS Office, it doesn't play nice with OS X Server, particularly with network homes.

"attempting to copy to [external drive] failed. the disk could not be read"

this is a problem on my 2x3GHz quad-core intel xeon macPro running os 10.5.7, and itunes 8.2. i have a 1TB external hard drive (firewire 800) that holds all my music for itunes. i have never had any problem with this setup before, until recently.
once, a while back i got an error on my itunes (that popped up without me doing anything.. seemingly random) saying something about not being able to save the itunes library. that went away after a restart, and hasn't returned.
BUT a new problem now happens any time i try to add more music to my itunes library. i have always added music to itunes by setting up my preferences "add file to library" and have the itunes library pointing to my external hard drive. then by dragging the files on-top of a playlist, it sorts and adds the files to my external hard drive. i have been using this process for years without any glitches.
now when i try to drag files into itunes, i get: "attempting to copy to [external drive] failed. the disk could not be read from or written to"
i double checked the read/write privileges on my external drive and nothing has changed since i got it. (it's still read/write access for my user.. and i've even tried putting a "read/write" for "all" as well. no dice)

thanks, that actually doesn't help the issue i'm having.
but now the problem has expanded to finder and everything else. so i'm pretty sure the external hard drive is starting to go out. i'm currently attempting to back up all 700GB of info from the drive.

Could not save preferences because the file could not be found (Windows) then Error 1 on PS,AE,PR,ID

I was trying out Photoshop, everything was running fine then one day when I close it I get an error:
"Could not save preferences because the file could not be found..."
Now when I boot it I get the Configuration Error 1.
After Effects still boots, but it reset all my preferences there. For example the workplace layout was reset, all my saved Output presets were removed and my memory-cache and performance settings were reset again.
Premiere and InDesign get the error too and won't boot.
This is the second time it has happened, I'll try wiping every Adobe program and reinstalling all over again, but it had run fine before for a while and it randomly happened.
Any idea how to fix this?

Nope I havent touched the Documents folder.
Forgot to mention that I'm on Windows 7

Please help i can't share my project I did try in all of them and it doesnt work it apears like that........ The share operation Master File has failed The operation could not be completed because an error occurred when creating frame 608 (error -1). and

I did try in all of them and it doesnt work it apears like that........
The share operation Master File has failed
The operation could not be completed because an error occurred when creating frame 608 (error -1).
and i dont know what to do plese hlp me....
Re: when i try to share my project to quicktime aroun 50% appears error -1 and i can't share it what to do please help

Double post…

Err 404 The URL could not be found on the server

I attempted to purchase a song and got this error message, error 404 the URL could not be found on the server. Now every time I download any song, it attempts to find the song and gives me the same error message. I don't care if I lose the song. I would just like to make it stop trying to download it.
Any ideas?

I've the same problem, and I've reported for the problem, but I received an non-reply, such as "do you have a good internet connection?", etc...
When I start iTunes, it ask me for my iTunes Store password, then it try to download the missing file I have buyed, but always with the same error message: There was a problem downloading "Fool to Cry / Sucking In the Seventies / The Rolling Stones". The URL "http://a438.phobos.apple.com/r10/Music/y1969/m12/d31/s06.dwrnogas.a.mp4" could not be found on the server.

Windows server update services installation failed the update could not be found

Similar Messages

Maybe you are looking for