Windows server with one NIC and two IP address answers to ping with wrong address.

Hi,
I have Windows 2012R2 server, as a web server. It has only one NIC, and I have given it two IP addresses. 10.0.0.11 at the main Window, and under the advanced tab, I have added 10.0.0.12 as additional ip to the nic. I have even but to
host file a row, that states 10.0.0.11 server.domain.local.
Now when I ping "server.domain.local" from the server itself, it gives me 10.0.0.12 as answer.
With nslookup I can get correct address (10.0.0.11). But when I type server.domain.local to the web browser it tries to connect 10.0.0.12, which is incorrect. It should connect to 10.0.0.11 address. Could you please help me?
Regards,
Jouko

Windows does not work well with two IP addresses on the same subnet. Results are inconsistent, as you have discovered. In general, you should never try to put two IP addresses from the same subnet onto a single Windows box. That means either
multiple addresses on a single NIC or on multiple NICs.
Maybe if you tell us what you are trying to accomplish by having two addresses, we could provide better assistance.
. : | : . : | : . tim

Similar Messages

Magic Mouse question. I have set this in Preferences by ticking Swipe between pages with one finger and also Swipe between full-screen apps with two fingers, however when I try to do the latter, the 2 finger swipe will take me only to the dashboard and

It's a Magic Mouse question. I have set this up in Preferences by ticking Swipe between pages with one finger and also Swipe between full-screen apps with two fingers, however when I try to do the latter, the 2 finger swipe will take me from the app that I am on to the dashboard only and not to my other open apps.
I also find that Smart zoom only works with some apps, for instance not with Word docs or email.
How can I correct this please?

Just figured out it also does not work with the Mail app.

Hash with one key and two values

Hello,
In java can i have a hash or similar data type than can have one value and two keys?
thanks,
jd

Eh, I'd avoid arrays, personally.
The reason why is that in my experience, once you start doing things like this, you end up adding an arbitrary number of additional elements for each key. Fixed-size arrays would be a pain.
If you don't want/need to create an object that encapsulates the two values, why not just use a java.util.Collection as the value in the hash? The Collection -- say, a LinkedList (you decide) -- would hold the two values you want associated with the key.

How to run two programs with one PC and two monitors

Good Morning,
I have a requirement to run a parallel loop and update the progress in two monitors with one computer.
For ex: its a two test stage, the process and progress of the 1st stage needs to displayed in monitor1 and similarly for 2nd stage to monitor 2 with program running with one computer.Would it be possible to do that.
Thanks in advance

Hi Parker,
yes, it's possible. You also have properties to set windows to specific monitors...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

I want a JClient Form with one mater and two details

Hi,
In my JClient Form, I want to have one master view and TWO detail views. The two detail views are linked to the master view simultaniously. Can Jdeveloper do that?
and How?
Stephen

Sure. Just define the VO's and the relations between them and afterwards develop some independant panels which describe the VO's. You can then place each panel on a single panel and organize them the way you want.
However, there isn't a way to simply generate the entire deal with a single wizard. You will have to run the wizard multiple times for each of the panels you wish to create and then manually put them together.
Hope This Helps

How to create a contract with one supplier and two dealers?

Hi Gurus,
I have a contract with a supplier (eg. Apple), but the products and services are supplied by two dealers.
The supplier is the manufacturer and with whom the negotiation of prices is made.
The dealers are those who make the delivery of the products and services and who the payment is done.
How can I create a contract with these characteristics in SRM 7.0?
I don't want to create two contracts with same products and services for two suppliers (Dealer_1 and Dealer_2).
How can this be handled through business partner type "Vendor"?
In "Partner" section in "Header" --> "Basic data", I can only add 1 vendor.
The system is:
Component software: SRM_SERVER
Release: 700
Level: 0008
Support package: SAPKIBKV08
Thanks in advance and best regards,
Alonso Valenzuela

Hi Wadim,
I have a similar requirement to create order lines in an existing contract with reference using BAPI_CUSTOMERCONTRACT_CHANGE. The order lines get created in the contract. However, the condition types from the order line which i'm referencing are not getting referenced and are not getting added in the Contract's line after referencing.
Did you come across any such issue ? If yes , could you suggest the solution ?
Regards,
Venkat.

Using TimeMachine with one Mac and two HDD

Hi
I was wondering if the following can be done with out loosing data and with out confusing TimeMachine:
Using one mac and with time machine going back and forth between 2 external HDD ?
in order to have 2 TimeMachine HDD (one at home and one on the move)
Did one of you did try this ?
If yes is it working fine ?
Thanks for sharing your feed back
Regards

Hi, and welcome to the forums.
Yes, that works fine.
The first backup to each drive will, of course, be a full one.
Thereafter, each backup will be an "incremental" one, of all the changes that have been made to your system since the last backup +*to that drive.+*
Of course, if you create a file at home, run a backup, then change the file and run another backup, your "home" backup will have both versions of that file. If you then do a backup to the other drive, it will only have the new version.
The more changes you make between drive swaps, the longer the first backup after the swap will be, since there are more changes to "catch up" with. In some cases, the volume of changes may cause Time Machine to do a "deep traversal," with a longer than usual "Calculating Changes" phase, to figure out what's changed and needs to be backed up.

How do I use icloud with one mac and two iphones

I have just got an iPhone 5.
My wife and I share a macbook pro
My wife has an iphone 4s and uses iCloud to sync photos etc.
I want to use iCloud too, so.....how do we use iCloud so:
- when we each take photos on our phones they sync to our mac
- our contacts sync (can we set preferences on our individual phones so we only get the contacts we want on our iPhones from a shared address book on the mac)
- we have individual calendars
Any advice much appreciated.
Thank you.

If you want to share the same photo stream so both your photos sync to your mac via iCloud you'll have to share the same primary iCloud account. Set this up in Settings>iCloud on both phones using the same Apple ID, and in System Preferences>iCloud on your Mac; then turn photo Stream to On. If you want to also using iCloud to sync with your shared Address Book on your Mac, but keep your contacts separate, you'll have to create two contact groups in Address Book on your Mac - one for each of you - and drag copies of the appropriate contacts into each group. Then turn iCloud syncing for Contacts to on on all your devices. To view just your own contacts you'll have to open the Contacts app on each of your phones, tap Groups, then check only your own contact group to view. When you add contacts on either phone, you'll have to add these contacts to the appropriate groups in Address Book on your Mac as you can't manage contact groups on your phone.
If you want to maintain your own calendars, the easiest thing to do is not to syncing your calendar with iCloud. If you did, your calendars would be merged in iCal on your Mac and the merged calendar would appear on both phones.
The important thing to know is that when you share an iCloud account any data you sync with the account will be merged and appear on all devices sharing the account. This will happen with your contacts too, but since you already have a shared Address Book on your Mac, it will stay up to date as you change/add/delete contacts on your phones. And by using contact groups you can filter your view to just your own contacts.

How can I set up itunes with one ipod and two laptops?

My boyfriend gave me an ipod a few months ago and he let me set up itunes on his laptop so everything is there. now that i have my own laptop i want everything thats on his laptop on mine. The itunes part i mean. but i don't know how can anyone help me?

Do as this article says:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
That will make your iPod the syncing computer.
You can only have one syncing computer/iTunes library for apps. and photos. You can however, manually sync music and vides from multiple computer/library if you sync manually. See that topic of:
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad

HT5621 When I got my new iPhone and was trying to switch everything over I accidentally set up a new icloud account with one email and had one on my old iphone with another account. Does anyone know how I can merge the two accounts?

When I got my new iPhone and was trying to switch everything over I accidentally set up a new icloud account with one email and had one on my old iphone with another account. Does anyone know how I can merge the two accounts?

You cannot merge Apple IDs but you can go to Settings > iCloud and 'Delete Account'. When prompted to turn off documents and data, choose the only option which is Delete from my iPhone, but on the other prompt for Contacts, Calendars, etc you can choose 'Keep on my iPhone' Then once the Account is Deleted form the iPhone, log back in with the correct Apple ID and choose Merge when prompted. This will merge your data from this iPhone with that iCloud account effectively putting your devices on the same account.

Make a router out of a simple notebook with one NIC (buy a second NIC)

Hello all,
Before starting, I think I must say hello to you because I'm new here : this is my first post . So, in fact, I'm working with Linux since 5 years. I'm running Gentoo on my workstation and my old server, Ubuntu on my notebook and for family, and finaly, I'm running Red Hat at work place for workstation and servers. I'm a Linux and JBoss administrator .
I've decided to run/try Arch because it seams to growth with rock-solid ideas and it's a binary distribution. I now prefer a binary distribution for my server, because it's taking too much time to let old computer or notebook compile the whole world (alone or not ...). I prefer now looking around and learn another Linux distribution. This is why I started to install my first Arch Linux : I will try to run a server on a simple notebook. In fact, it's a working machine, but without any graphics capabilities (memory has burned...), and so, perfect for a little server low consumption. I want it to replace my current server/router running Gentoo on an old Pentium 3.
For now, I've encountered these little problem :
- LID problem when screen is close : reboot never work (power off just after the BIOS, when the LID state is "screen closed"...) => disable LID connection (unplugged from motherboard)
- ssh problem => must now use "/etc/hosts.allow" to let remote machine to be connected
- try routing packet with one NIC => for now, doesn't work ...
- try to get X11 Forwarding => doesn't work too, but it will works quickly
My infrastructure is just a server/router splitting in two part for the LAN at home :
- one part is LAN with all workstations
- the other part is LAN_router which is another network with only the ADSL router to access internet
So, its looking like this : <machine1> => <switch> => <[eth1]server/router[eth0]> => <switch> => <router_ADSL> => INTERNET
All is fine ... with the old machine ... for the new one, it has only one network interface ... The question is : how to do routing with only one NIC ???
In theory, I "should" work ... but .. some component can have some little hard time to do the right things .. and for me, is not working right now.
The first try is to use one interface with one IP aliasing, like this :
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:1d:e4:a3:d5:1a brd ff:ff:ff:ff:ff:ff
inet 10.2.1.8/26 brd 10.2.1.63 scope global eth0
inet 10.2.1.66/26 brd 10.2.1.127 scope global eth0:0
inet6 fc80::21a:e2ff:fea3:d56a/64 scope link
valid_lft forever preferred_lft forever
Two sub network are used :
- 10.2.1.0/26
- 10.2.1.64/26
I must have 2 ip on one NIC, so aliasing can be used (when testing, the new server/router is able to ping a workstation and the ADSL router ; it can also use internet). I've heart there is some problem with "iptables" to set forwarding rules when using IP Aliasing ... but I prefer try myself . It doesn't work for now, probably because of this. But, is there a way to use a "workaround" ? For example, if "iptables" is not able to play with aliasing, and so, interface such as "eth0:0", may be there is a way to tell it, like this :
[root@serveurn ~]# iptables-save
# Generated by iptables-save v1.4.10 on Sun Dec 12 17:30:01 2010
*nat
:PREROUTING ACCEPT [0:0]
:INPUT ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
:POSTROUTING ACCEPT [0:0]
-A POSTROUTING ! -d 10.2.1.0/26 -o eth0 -j SNAT --to-source 10.2.1.66
COMMIT
# Completed on Sun Dec 12 17:30:01 2010
# Generated by iptables-save v1.4.10 on Sun Dec 12 17:30:01 2010
*filter
:INPUT DROP [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [9:932]
-A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A INPUT -p icmp -j ACCEPT
-A INPUT -s 10.2.1.0/26 -p tcp -m tcp --dport 22 -j ACCEPT
-A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT
COMMIT
# Completed on Sun Dec 12 17:30:01 2010
... use the interface "eth0" (for the whole throughput) and do SNAT for all excepted for the LAN network ? But it seams to not work ...
I got a second idea : if it wan't work with aliasing ... may be can I use virtual interface and bridge ... create a bridge with "eth0" and "tap0" so I can add more than one ip in the machine .. and may be, will be able to route packet from these two interface ???
But for now, I have to understand why X11 Forwarding don't work ...
EDIT: xorg problem solved : xorg-auth was requested ...
Last edited by loopx (2011-01-09 18:08:28)

fukawi2 wrote:" ...it is dirty and nasty and shouldn't be done unless you're stuck on a deserted island and your only hope of rescue is building a router out of 2 coconuts, a sea shell and a single NIC that was washed up on the beach in the last storm. "
PRICELESS !!
@loopx: Honestly: return the USB NIC you just got, buy a compatible device(maybe an asus rt-n16) and install dd-wrt. You'll be a lot happier....
Last edited by Daniel_F (2011-01-10 00:34:08)

Windows Server Essentials Storage Service and Windows Server Essentials Email Service eating memory

Hi
I have Windows Server 2012 R2 with Essentials Role installed. I have integrated server with Azure AD, Office 365 and Intune using the Essentials Dashboard integration tools.
I can see that Windows Server Essentials Storage Service and Windows Server Essentials Email Service are eating much of server memory. What are these services for and why they use a lot of memory? Specially I am wondering about the Email Service. What is
it for? Server dont handle email in any way so what is this service for? I tried to google it but found nothing.

Hi
I have 6GB of memory.
When I check from Resource Monitor, for Essentials Storage Service, Commit Set is 4G and Working Set is 1,8G.
Email Service Commit is about 1,8G and Working Set is just below 1G.
So these two services are reserving almost all the memory.
Memory is about 85-90% in use all the time, whether it be night or day.
Server have about 12 users and at the office there is about 2-6 person at the time. Link between server and office is 100M. There are no other services installed but the basic ones. We use server for AD (O365 integration) and file shares. Traffic in File
Shares are not big. They are more kind of an warehouse that in busy day-to-day use.
This server is about couple of months old and it has been like this since it was fired up.
I dont know what to look for from Event Logs and Process Monitor dont give me anything useful.

Can you activate an iphone with one sim, and than once it is activated use it with another sim?

can you activate an iphone with one sim, and than once it is activated use it with another sim?

It could be the activation server is unavailable right now, however have you or anyone else ever used that computer to jailbreak or hack another phone? That can have an affect on the hosts file. You can check this regarding information on the hosts file or security software problems.
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
Update to the latest version of iTunes. Mac OS X 10.5.8 (Leopard) users may need to download iTunes 10.6.3.
Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
Error 3014
This error occurs when iTunes is unable to reach gs.apple.com in a timely fashion. Follow the steps below in Unable to contact the iOS software update server gs.apple.com.

I tried to sinc my photos and i ended up deleting off my phone all the pictures. i only ended up with one folder, and i cant figure out how to put rest of folders from my computer back on my phone.....help

i tried to sinc my photos and i ended up deleting off my phone all the pictures. i only ended up with one folder, and i cant figure out how to put rest of folders from my computer back on my phone.....help
and on a second problem. I need to know for sure that my contacts are backed up on my computer

Create a parent folder on your computer to store the named folders of photos that you want transferred to your iPhone. Under the Photos tab for your iPhone sync preferences with iTunes, select the parent folder. All named folders of photos within will be transferred to your iPhone as separate folders or albums.
Regarding your 2nd question, this should be easy. Your contacts should be available on your computer with or without an iPhone or any cell phone, which can be lost or stolen.
Although contacts are included with your iPhone's backup which is updated by iTunes as the first step during the iTunes sync process, not a good idea to depend on this either since the iPhone backup includes a significant amount of other data. Contacts are designed to be synced with a supported address book app on your computer. With Windoze, this can be with Outlook 2003, 2007, or 2010 along with syncing calendar events and notes, or with the address book app used by Outlook Express with XP and by Windows Mail with Vista and Windows 7 called Windows Contacts for syncing contacts only.

In my family we have 3IPhones 4S, one IPhone5, one IPad3, one IPadMini and two IPad 4. Is it possible to use the same energieadapter for all of those ?

In my family we have 3IPhones 4S, one IPhone5, one IPad3, one IPadMini and two IPad 4. Is it possible to use the same energieadapter for all of those ?

Yes but the iPhone chargers will struggle to charge the iPads ,they need more power than the iPhone chargers produce and with an iPad will charge VERY slowly
The iPad chargers whether 10w or 12 will happily charge all your devices and Apple confirms the compatibility on the relevant web page.

Windows server with one NIC and two IP address answers to ping with wrong address.

Similar Messages

Maybe you are looking for