Windows service doesn't start at boot

When our Xserve starts up, the Windows service does not start.
I've got SMBSERVER=-YES- in /etc/hostconfig.
Once the xserve is running, clicking on the Start Service button for Windows in Server Admin starts the service with no problems. Once it's running, it's fine. The server has no other problems that I'm aware of.
Any suggestions would be greatly appreciated.
Xserve Mac OS X (10.4.6)

I have exactly the same problem. Did you ever find a solution?

Similar Messages

Satellite U840-110 - Windows 7 doesn't start - looped boot

Hi,
I have been using a Satellite U840 - 110 laptop since Dec 2012 on a Windows 7 Home Premium operating system. Recently, the laptop was left on standby for a couple of days. When I tried to start the computer, it initially froze. So I forced reboot by pressing the on/off button. After repeating this for a couple of times, it first showed a blue screen. After which when the computer was restarted, it showed a black screen with the following message
'Windows Error Recovery
Windows failed to start. A recent hardware or software change might be the cause.
Launch Startup Repair or
Start windows normally'
I have tried both these options a few times and everytime at the end of the process, it would come back to these same screen. I have also tried to press F8 and used Advanced Boot Options and tried 'last know good configuration'.
None of it seems to work and I have not been able to load Windows. I have not got any backup of my data and may end up losing a lot of vital information.
Is there anyway I can sort out the problem and get the computer to work again?
Is there any way to retrieve the data from the hard disk.
Thanks in advance for the help!

Is there any way to retrieve the data from the hard disk.
You can remove the HDD from the notebook and could connect it to another computer using USB-to-SATA caddy.
After that you could insert the HDD into the notebook again and could try to perform the Toshiba HDD recovery.
(F8 – repair my computer – Toshiba HDD recovery)

DBConsole Service doesn't start after Install OAS F&R-Services Win 10g

Windows DBConsole Service doesn't start after Install OAS F&R-Services
Hello,
we have installed:
WINDOWS Server 2003 with SP 2
Oracle 10.2.0.1
OAS F&R Services 10.1.2.0.2
after Install DBR2 EM / DBConsole did work
after Install OAS F&R-Service
the windows-service for DBConsole
doesn't start, return with an Error Code 2
see below
the file named emdbconsole.nohup from output log
is not to find
the ias_console does work fine
OAS F_R-Services do work too
whats may be wrong ?
regards
Norbert
OracleDBConsoleorclsrvc.log :
EMDROOT=D:\oracle\product\10.2.0\db_1
ORACLE_HOME=D:\oracle\product\10.2.0\db_1
EMDSTATE=D:\oracle\product\10.2.0\db_1\kfin_orcl
CONSOLE_CFG=dbconsole
TRACE_LEVEL=16
TIMEOUT=15
12/14/09 13:13:08 Start pending...
12/14/09 13:13:08 Verifying dbconsole is not started already. Command line "D:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
12/14/09 13:13:09 dbconsole launch commandline is "D:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
12/14/09 13:13:09 Tracking process launch...
12/14/09 13:13:39 dbconsole exited with retCode 2.
12/14/09 13:13:39 Check D:\oracle\product\10.2.0\db_1\kfin_orcl\sysman\log\emdbconsole.nohup for details
Edited by: astramare on Dec 15, 2009 8:43 AM

Hi,
1. Stop the DBConsole. (set ORACLE_SID first & ORACLE_HOME)
cd %ORACLE_HOME%\bin
emctl stop dbconsole
2. Update the <ORACLE_HOME>/<hostname_sid>/sysman/config/emd.properties file.
Change line from:
tracelevel.main=WARN
To
tracelevel.main=DEBUG
Decomment this line, so that the line becomes :
EMAGENT_PERL_TRACE_LEVEL=DEBUG
3. Update the <ORACLE__HOME>/<hostname_sid>/sysman/config/emomslogging.properties
Change line from:
log4j.rootCategory=WARN, emlogAppender, emtrcAppender
To
log4j.rootCategory=DEBUG, emlogAppender, emtrcAppender
4. Remove/backup all log files from ORACLE_HOME/<hostname_sid>/sysman/log
5. Start the dbconsole and upload the output of each command
- start the dbconsole: "emctl start dbconsole"
- issue "emctl clearstate"
- status the dbconsole: "emctl status dbconsole"
- check the status of the agent until it comes up: "emctl status agent"
- force an upload: emctl upload
6. Check If you are able to view the dbconsole Page & login
check below logs may be you can see the close error messages to solve the issue.
<ORACLE_HOME>/<hostname_sid>/sysman/log directory
<ORACLE_HOME>/<hostname_sid>/sysman/config/emoms.properties
Otherwise re-create the DBconsole using the metalink doc 278100.1 : How To Drop, Create And Recreate DB Control In A 10g Database. (Please check the steps from Recreate/ReConfig DB Control, if you want to re-create)
Thanks.

Windows service question (automatic start?)

Is there a setting in OSX server that tells the box to start a specific service automatically if the machine is rebooted, specifically Windows service? When we reboot, Windows service does not start automatically.
Thanks!

/System/Library/StartupItems/Samba/Samba is a startup script that starts SAMBA, which provides the Windows file sharing. The script checks the entry in /etc/hostconfig for SMBSERVER to say yes, and if it does starts the daemons (smbd and nmbd).
Roger

SUP 2.0 Why the sybase Messageing Service doesn't start?

Hellow experts,
SUP 2.0 Why the sybase Messageing Service doesn't start?
When I start the service, it starts and ends indicating "if they are not in use by other services or programs; it will end automatically"
What should I do for this?
Thanks
Prabakar

sometimes you only have to restart your pc. STOP SUP SERVICE ( AS ADMINISTRATOR ) and START SERVICE ( AS ADMINISTRATOR AGAIN ) ...
That happens to me very often!

FIM Synchronization Service doesn't start

Hi,
Recently we have migreated FIM database from the local SQL server to an SQL 2012 Cluster. I used the following guide to configure DB related settings. Things worked fine.
http://social.technet.microsoft.com/wiki/contents/articles/5465.fimilm-how-to-move-the-backend-sql-server-synchronization-service-database.aspx
However after I uninstalled local SQL and rebooted the server FIM service doesn't start. The error message is:
The Forefront Identity Manager Sychronization Service depends the following service: MSSQLSERVER. This service might not be installed. (Event ID 7003).
How to fix this problem?
Thank you for your help.

I assume that you have uninstalled MS SQL Server, right? If so, please try the following:
Remove MSSQLServer from the DependOnService Value Name, a REG_MULTI_SZ data type
at HKLM\System\CurrentControlSet\Services\<ServiceKey>
Run as admin - it would remove dependency from FIMSynchronizationService.
Keep trying If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

[SOLVED] systemd/cron as user: timer doesn't start after boot

Hello,
I've tried to follow the wiki's systemd/cron functionality article to have a systemd service to run hourly.
Everything seems to be working ok, except that the hourly timer doesn't start automatically : I have to issue a
systemctl --user timer-hourly.timer start
command every time I start the machine to get the timer running.
Can you help me understand what I'm missing to get the (user) timer to start automatically after boot?
Thanks!
My setup consists of the following files:
/home/myuser/.config/systemd/user:
drwxr-xr-x 2 myuser users 4096 Jun 25 17:30 basic.target.wants/
-rw-r--r-- 1 myuser users 217 Jun 25 10:08 db_backup.service
-rw-r--r-- 1 myuser users 232 Jun 25 10:08 test.service
-rw-r--r-- 1 myuser users 61 Jun 19 12:14 timer-hourly.target
drwxr-xr-x 2 myuser users 4096 Jun 25 10:10 timer-hourly.target.wants/
-rw-r--r-- 1 myuser users 134 Jun 19 12:14 timer-hourly.timer
/home/myuser/.config/systemd/user/basic.target.wants/:
lrwxrwxrwx 1 myuser users 50 Jun 25 10:08 timer-hourly.timer -> /home/myuser/.config/systemd/user/timer-hourly.timer
/home/myuser/.config/systemd/user/timer-hourly.target.wants/:
lrwxrwxrwx 1 myuser users 49 Jun 13 15:51 db_backup.service -> /home/myuser/.config/systemd/user/db_backup.service
lrwxrwxrwx 1 myuser users 44 Jun 25 10:10 test.service -> /home/myuser/.config/systemd/user/test.service
timer-hourly.timer:
[Unit]
Description=Hourly Timer
[Timer]
OnBootSec=5min
OnCalendar=hourly
Unit=timer-hourly.target
[Install]
WantedBy=basic.target
timer-hourly.target:
[Unit]
Description=Hourly Timer Target
StopWhenUnneeded=yes
test.service:
[Unit]
Description=Run a test (echo) job every hour
Wants=timer-hourly.timer
[Service]
Nice=19
IOSchedulingClass=2
IOSchedulingPriority=7
ExecStart=/usr/bin/python /home/myuser/test_service.py
[Install]
WantedBy=timer-hourly.target
db_backup.service:
[Unit]
Description=Backups databases
Wants=timer-hourly.timer
[Service]
Nice=19
IOSchedulingClass=2
IOSchedulingPriority=7
ExecStart=/home/myuser/source/db_backups/db_backup.sh
[Install]
WantedBy=timer-hourly.target
test_service.py is a simple python script that appends the current time to a file, to check if the service is being run by the timer. (it is after I start the timer after boot, and runs correctly every hour)
db_backup.sh is a script that dumps a database into a text file in a mercurial repository, commits the change and pushes it to backup locations.
Last edited by fede (2014-06-25 21:06:09)

Have you tried this:
systemctl --user enable timer-hourly.timer

Created windows service fails to start

Hi all. We have a piece of software that must always be running on a Windows Server 2008 box.
Currently due to poor development, this software is only run by a local user (not as SYSTEM nor initiated via a Windows Service) so when our user gets logged off, the software goes down with it.
I have to find a way to get a particular command to run (as administrator) when the machine turns on (even if a user a user does not log in). I have been playing with the SC command to create a service but I cannot get the service to start. I keep receiving
the error:
FAILED 1053: The service did not respond to the start or control request in a timely fashion.
Another option I was trying as a temporary fix was to use the PsTools to launch the software. When the processes are running they are running as SYSTEM, but they still shut down when the user is logged off. Is there an easier way to get services to work?
Or another way entirely to get software to launch on System boot? Please note that I am very restricted in this environment so doing this without the use of 3rd party tools is preferable. Thank you!!

If you're the dev, then these might help:
http://msdn.microsoft.com/en-us/library/zt39148a%28v=vs.110%29.aspx and
http://www.codeproject.com/Articles/106742/Creating-a-simple-Windows-Service
This might help you also:
http://www.timdavis.com.au/general/creating-a-user-defined-service-in-windows-7/

MacBook Pro, randomly Windows 7 doesn't start and screen goes blank

Hi, I installed Windows 7 (Ultimate 64-bit) using the BootCamp on my MacBook Pro (MBP) i7, mid 2010. Installation was successful without any issues. This is my first Mac and, for now, I primarily use Windows on my MBP. The problem: After selecting Windows OS, randomly, Windows doesn't start and the screen goes blank. When this happens, most of the time I have to press the power button twice and press the Option key again to restart in Windows. Sometimes I have to hold down power button for several seconds to turn off MBP, then power it back on to start over. Windows 7 seems to restart on second try every time.
I can tell when the screen will go blank and Windows will not start, when the blinking cursor does not appear on upper left corner of the screen. Also, I enabled Windows OS Boot Log and nothing displays when this happens.
I took in my MBP, twice, to local Apple store Genius Bar and I was told that it was a Windows problem and I must purchase AppleCare Protection Plan to get help resolving the blank screen. It was explained to me that AppleCare had Windows experts who can help with resolving the issue. Therefore I purchased the AppleCare Protection Plan and spoke to AppleCare directly and still no resolution.
Any help you can provide would be greatly appreciated. Thanks in advance.

There is a forum specifically for Boot Camp, this is a general MBP forum and most of us don't use Boot Camp or Windows. The link to that forum is:
http://discussions.apple.com/category.jspa?categoryID=237
Apple does support Boot Camp however if your problem is with Windows Apple does not support a Microsoft product. You would need to contact Microsoft for help.
Roger

Windows Services doesn't running automatically

Hi you all,
Every I shutdown or restart my Mac the windows service is doesn't runn & I should starting it manually.
How to configure this services in order running automatically?

I have the same problem. My PPC Xserve is running 10.4.7 and is configured as OD master and PDC. The Windows Service start manually in the Service Admin and changes /etc/hostconfig to set "SMBSERVER=-YES-", but doesn't restart automatically on reboot.
I found one workaround. There are two launchd items in /System/Library/LaunchDaemons: smbd.plist and nmbd.plist. You can enable them by:
cd /System/Library/LaunchDaemons
sudo launchctl load -w smbd.plist
sudo launchctl load -w nmbd.plist
and on restart, Windows file sharing will start automatically. The downside is that it will still be grayed out in the Service Admin.
PPC Xserve Mac OS X (10.4.7)

Windows Service does not start automatically

Hi
I have a .NET 4.5 C# windows service, StartType set to automatic. It is running fine in server.
Few days ago, my server has windows update, including security update for .NET framework 4.5.1. Server auto restarted.
However, my service is not started.
By referring to eventlog, it shown as below sequence
1. Explorer initiated restart - Shutdown type - restart
2. Sql Server Service is stopped successully
3. My Service is stopped successully
-- Server restarted
4. Sql Server Service is in running state
5. My Service is stopped successully
Question is, why my service is stopped instead of running/started? I checked event log and my app log, no error at all.
Any ideas?
Thank you

I was thinking to set "SQL Server", but I am not sure what is the service name for the SQL service name.
Anyway to specify like "SQL Server *" ?
thank you
The default instance service name is MSSQLSERVER, and MSSQL$[name] for a named instance. If you're not sure what the instance is, you could check the services.msc or the registry value in this registry hive:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\InstalledInstances
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

After Upgrade, Windows Service will not start automaticly

I just upgraded from 10.2 to 10.4. When I did the Windows File Service, will not start automaticly. I can start it manually, after a reboot. Any idea on how to fix this?

I am having the same problem on a clean install of Server 10.4.10, AFP & Web starts automatically on restart, but not Windows Service. This is the first time I have run into this, it starts fine on all other servers I administer. Then entry in /etc/hostconfig for SMBSERVER is set to "-YES-", there is no errors or messages of any kind in the console or system log, it just won't start.
This complicated with the problem I am having on the same server where I cannot connect via ARD after reboot without someone there physically plugging a monitor into the video port first (another open post I have - http://discussions.apple.com/message.jspa?messageID=5850246#5850246 ). So, doing maintenance at off-hours is almost unworkable.

Oracleoms10gASControl windows service is not starting 10.2.0.5

Hi
I am having an issue with my Grid Control installation.
the Oracleoms10gASControl service will not start
when checking the windows event log I can see the following error:
An error occurred while trying to initialize the service.
this error was not very descriptive so I decided to have a root through the log files to see if I could find any errors there.
*=====Oracleoms10gASControlsrvc.log=====*
-------------- [Oracleoms10gASControl] ------------
EMDROOT=E:\OracleHomes\oms10g
ORACLE_HOME=E:\OracleHomes\oms10g
EMDSTATE=E:\OracleHomes\oms10g
CONSOLE_CFG=iasconsole
TRACE_LEVEL=16
TIMEOUT=15
08/05/09 17:56:34 Start pending...
08/05/09 17:56:34 Verifying iasconsole is not started already. Command line "E:\OracleHomes\oms10g\bin\emctl.bat" istatus iasconsole
08/05/09 17:56:55 iasconsole launch commandline is "E:\OracleHomes\oms10g\bin\emctl.bat" istart iasconsole
08/05/09 17:56:55 Tracking process launch...
08/05/09 17:57:31 iasconsole exited with retCode -1073741819.
08/05/09 17:57:31 Check E:\OracleHomes\oms10g\sysman\log\emiasconsole.nohup for details THIS LOG FILE DOES NOT EXIST?
-------------- [Oracleoms10gASControl] ------------
EMDROOT=E:\OracleHomes\oms10g
ORACLE_HOME=E:\OracleHomes\oms10g
EMDSTATE=E:\OracleHomes\oms10g
CONSOLE_CFG=iasconsole
TRACE_LEVEL=16
TIMEOUT=15
08/06/09 11:05:08 Start pending...
08/06/09 11:05:08 Verifying iasconsole is not started already. Command line "E:\OracleHomes\oms10g\bin\emctl.bat" istatus iasconsole
08/06/09 11:05:11 iasconsole may already be running. termStatus=3
*=====em.nohup=====*
--- Standalone agent
----- Wed Aug 5 17:48:40 2009::Agent Launched with PID 4572 at time Wed Aug 5 17:48:40 2009 -----
(pid=4572): starting emagent version 10.1.0.5.0
09/08/05 17:48:49 log4j:ERROR No appenders could be found for category (oracle.sysman.eml.app.ContextInitializer).
09/08/05 17:48:49 log4j:ERROR Please initialize the log4j system properly.
09/08/05 17:48:52 Setting AdminCtroller for ias/ias/administration
09/08/05 17:48:52 Settng IM/URLGenerator for Administration
2985 [Orion Launcher] DEBUG emSDK.util.help - processing config file locale : enUS
2985 [Orion Launcher] DEBUG emSDK.util.help - processing config file locale : _de
3000 [Orion Launcher] DEBUG emSDK.util.help - processing config file locale : _es
3000 [Orion Launcher] DEBUG emSDK.util.help - processing config file locale : _fr
3000 [Orion Launcher] DEBUG emSDK.util.help - processing config file locale : _ja
3000 [Orion Launcher] DEBUG emSDK.util.help - processing config file locale : _ko
3000 [Orion Launcher] DEBUG emSDK.util.help - processing config file locale : ptBR
3016 [Orion Launcher] DEBUG emSDK.util.help - processing config file locale : zhCN
3016 [Orion Launcher] DEBUG emSDK.util.help - processing config file locale : zhTW
3016 [Orion Launcher] DEBUG emSDK.util.help - processing config file locale : _it
3032 [Orion Launcher] INFO oracle.sysman.eml.app.ContextInitializer - Done Successfully
3141 [Thread-3] DEBUG emSDK.comm - <EMDResponse>
<GetTIRes>
<Target TYPE="oracle_ias" NAME="EnterpriseManager0.myserver.mydomain.ie" VERSION="1.0" TYPE_DISPLAY_NAME="Application Server">
     <Property NAME="OracleHome" VALUE="E:\OracleHomes\oms10g"/>
     <Property NAME="host" VALUE="myserver.mydomain.ie"/>
     <Property NAME="StandaloneConsoleURL" VALUE="http://myserver.mydomain.ie:18100/emd/console"/>
     <Property NAME="StatusURL" VALUE="http://myserver.mydomain.ie:7778"/>
     <Property NAME="Version" VALUE="10.1.2.3.0" IS_DYNAMIC="TRUE"/>
     <Property NAME="InstallType" VALUE="core" IS_DYNAMIC="TRUE"/>
     <Property NAME="VersionCategory" VALUE="904plus" IS_DYNAMIC="TRUE"/>
</Target>
</GetTIRes>
</EMDResponse>
09/08/05 17:48:55 Oracle Application Server Containers for J2EE 10g (10.1.2.3.0) initialized
09/08/05 17:48:59 Tutalii: E:\OracleHomes\oms10g\dcm\lib\dcm.jar archive
--- Standalone agent
----- Wed Aug 5 17:56:59 2009::Agent Launched with PID 5624 at time Wed Aug 5 17:56:59 2009 -----
09/08/05 17:57:18 log4j:ERROR No appenders could be found for category (oracle.sysman.eml.app.ContextInitializer).
09/08/05 17:57:18 log4j:ERROR Please initialize the log4j system properly.
(pid=5624): starting emagent version 10.1.0.5.0
09/08/05 17:57:23 Setting AdminCtroller for ias/ias/administration
09/08/05 17:57:23 Settng IM/URLGenerator for Administration
6326 [Orion Launcher] DEBUG emSDK.util.help - processing config file locale : enUS
6326 [Orion Launcher] DEBUG emSDK.util.help - processing config file locale : _de
6326 [Orion Launcher] DEBUG emSDK.util.help - processing config file locale : _es
6326 [Orion Launcher] DEBUG emSDK.util.help - processing config file locale : _fr
6345 [Orion Launcher] DEBUG emSDK.util.help - processing config file locale : _ja
6345 [Orion Launcher] DEBUG emSDK.util.help - processing config file locale : _ko
6345 [Orion Launcher] DEBUG emSDK.util.help - processing config file locale : ptBR
6345 [Orion Launcher] DEBUG emSDK.util.help - processing config file locale : zhCN
6345 [Orion Launcher] DEBUG emSDK.util.help - processing config file locale : zhTW
6345 [Orion Launcher] DEBUG emSDK.util.help - processing config file locale : _it
6365 [Orion Launcher] INFO oracle.sysman.eml.app.ContextInitializer - Done Successfully
09/08/05 17:57:29 Oracle Application Server Containers for J2EE 10g (10.1.2.3.0) initialized
09/08/05 17:58:26 Tutalii: E:\OracleHomes\oms10g\dcm\lib\dcm.jar archive
===============
Strangely even though windows says the service is down. Grid control IS actually working. I can log in as see the AS server control and see that it's all up.
I am at a loss on what to do.
I may have to raise a call but I decided to ask here first
Cheers
Graham

We have found a solution to this Issue.
the notes on meta link are only half correct and it is a combination of 2 fixes that solves this problem
Solution:
Frist:
Create an environment variable called
EM_OC4J_OPTS=-XX:+ForceTimeHighResolution
On metalink it says to set the environment varibale like this:
EM_OC4J_OPTS=-"XX:+ForceTimeHighResolution"
note the " " . this is wrong, there should be no quotation marks.
Second:
modify the file:
<ORACLE_HOME>\bin\LaunchEMiasconsole.pm
and change:
my $OSNAME = $^O;
my $command = "$JAVA_HOME/bin/java -Xmx256m ";
if (($OSNAME eq "MSWin32") or ($OSNAME eq "Windows_NT")) {
$command = $command .
"-XX:+ForceTimeHighResolution ";
to:
my $OSNAME = $^O;
my $command = "$JAVA_HOME/bin/java -XX:+ForceTimeHighResolution -Xmx256m ";
if (($OSNAME eq "MSWin32") or ($OSNAME eq "Windows_NT")) {
$command = $command .
"-XX:+ForceTimeHighResolution ";
Save the changes and restart you system
this solved the issue for us
Regards
Graham

Windows Services won't start [10.4.7]

Did the usual update method to my 10.4.2 server.. (repaired permissions, ran the combo updater, repaired again) and everything seems to be working except Windows File Sharing which will not start.
Checking the logs I see
--log.smbd--
[2006/07/20 10:01:49, 0] /SourceCache/samba/samba-92.20/samba/source/smbd/server.c:main(789)
smbd version 3.0.10 started.
Copyright Andrew Tridgell and the Samba Team 1992-2004
[2006/07/20 10:01:49, 0] /SourceCache/samba/samba-92.20/samba/source/lib/utilsock.c:open_socketin(724)
bind failed on port 445 socket_addr = 0.0.0.0.
Error = Address already in use
and in --log.nmbd-- about a million entries as soon as I start the service
[2006/07/19 09:24:32, 0] /SourceCache/samba/samba-92.9/samba/source/nmbd/nmbd.c:terminate(56)
Got SIGTERM: going down...
[2006/07/19 09:25:50, 0] /SourceCache/samba/samba-92.9/samba/source/nmbd/nmbd.c:main(668)
Netbios nameserver version 3.0.10 started.
Copyright Andrew Tridgell and the Samba Team 1994-2004
[2006/07/20 09:22:10, 0] /SourceCache/samba/samba-92.9/samba/source/nmbd/nmbd.c:terminate(56)
Got SIGTERM: going down...
[2006/07/20 09:23:33, 0] /SourceCache/samba/samba-92.9/samba/source/nmbd/nmbd.c:main(668)
Netbios nameserver version 3.0.10 started.
Copyright Andrew Tridgell and the Samba Team 1994-2004
Any ideas what could be going on here?
Thanks,
James Nierodzik

don't know if you already have this solved, but try using a default smbd.conf file in your /etc/ folder. if the windows services start then it is something in your configuration that must have been changed between the 10.4.7 and 10.4.2 updates.
you can slowly start adding pieces of your configuration back in or just rebuild it if your configuration is not too complicated.
if using a different config file doesnt work then seeing the issue with binding to the port makes me think that there is already another version of samba running on the server.

Windows Services won't start

Has anyone had the problem of tempting to startup Windows services only to not have it start at all? Am looking for any input.
Thank you

Thank you for the info.
I enabled the disk through Workgroup manager and it still won't start.
That is correct,Samba.
Below is the error:
smbd version 3.0.10 started.
Copyright Andrew Tridgell and the Samba Team 1992-2004
[2006/02/20 22:59:53, 0] /SourceCache/samba/samba-92.15/samba/source/lib/utilsock.c:open_socketin(724)
bind failed on port 445 socket_addr = 0.0.0.0.
Error = Address already in use

Windows service doesn't start at boot

Similar Messages

Maybe you are looking for