Windows service not lauching after restarting Xserve.

Windows service was fine to start, not sure if it was after a update or what. When doing updates and restarting the server, Windows Services will not start back up, I have to manually start it back up. No other service has issues. This is not a huge deal until I was away and none of the Windows clients could get on to the server for 2 days. HELP!
The hostconfig says
SMBSERVER=-YES-
and the log says this
[2009/03/14 13:16:55, 0] /SourceCache/samba/samba-100.12/samba/source/lib/utilsock.c:get_peeraddr(1009)
getpeername failed. Error was Socket is not connected
[2009/03/14 13:16:56, 0] /SourceCache/samba/samba-100.12/samba/source/lib/utilsock.c:get_peeraddr(1009)
getpeername failed. Error was Socket is not connected
[2009/03/14 13:16:56, 0] /SourceCache/samba/samba-100.12/samba/source/lib/utilsock.c:write_socketdata(446)
writesocketdata: write failure. Error = Broken pipe
[2009/03/14 13:16:56, 0] /SourceCache/samba/samba-100.12/samba/source/lib/utilsock.c:writesocket(471)
write_socket: Error writing 4 bytes to socket 6: ERRNO = Broken pipe
[2009/03/14 13:16:56, 0] /SourceCache/samba/samba-100.12/samba/source/lib/utilsock.c:sendsmb(656)
Error writing 4 bytes to client. -1. (Broken pipe)
[2009/03/14 13:16:56, 1] pdbods.c:odssamgetgrgid(2870)
odssam_getgrgid: gid [99]
[2009/03/14 13:18:14, 1] pdbods.c:odssamgetgrgid(2870)
odssam_getgrgid: gid [99]
Any help would be great!!!

KaiS wrote:
Dear all,
11.1.0.7 on windows server 2003
We have installed 11.1.0.7 on windows 2003 .DB user is authenciated at the os level.we changed the domain user password and db is not coming up now ?
what could be the reason ?
KaiDid you try to look at the error being reported during startup cmmand or in alert log?
Regards

Similar Messages

  • Finder window settings not "sticking" after restart (boot drive only)

    I have an annoying problem with the finder window only on the boot drive not holding whatever settings (list view) I give it after a restart. Odd part of it is that it reverts to some old settings I had at one time in icon view. When I switch back to list view I get a view with the library folder opened. I figure there is some corrupt setting somewhere, I deleted the desktop db for that folder with no luck. I have no problem on any other drives.
    Thanks for any help,
    Larry
    G5 Dual 2.7ghz Mac OS X (10.4.3) 3gb Ram

    Hi Larry,
    navigate to ~(yourhome)/library/preferences and trash these two files:
    com.apple.finder.plist
    com.apple.sidebarlists.plist
    Then log out and back in again.
    (You will have to reset a few finder prefs the way you like them.)
    Let us know.
    -mj
    [email protected]

  • PCI wireless card does not work after restart - FM2-A55M-E33

    Installed TP-LINK WN751ND wireless PCI card onto FM2-A55M-E33 motherboard. The card works fine after cold start, but does not work after restart. Windows recognises the card, but it gets code 10, cannot start.
    BIOS is updated (v.11.1), as well as drivers and Windows 7 64.
    I suspect that this might be the issue: Incorrect ASPM Transitions on the GPP Interface as found in ChipsetMotherboard_TechDocs/48671.pdf on AMD's official support site.
    Does anyone know more about this issue?

    Great! I've done that and now my card shows up. Thing is, when I try to get an IP address, it won't work. Here is the command output:
    ieee80211 phy0: wl_ops_config: change monitor mode: false (implement)
    ieee80211 phy0: wl_ops_config: change power-save mode: false (implement)
    ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false (implement)
    And then it times out and no IP is assigned. The thing is, wpa_supplicant stays alive after this time out, and I am unable to kill it (killall -9 wpa_supplicant won't kill it). At this point if I try to reboot the machine, it will stop at 'Rebooting' and won't go anywhere. If I turn off the wireless card in its switch Linux crashes. If I try to get an ip again (by running dhcpcd) the command will hang and not return to the shell anymore.
    I am unable to find any useful information in the logs.
    Got any more suggestions?
    Thanks! (And sorry to disturb so much)

  • Windows could not start after SP-3 update

    Windows could not start after SP-3 update
    After I updated Apple Software Update to 2.1 and then updated to BC 2.1 successfully I D/L & Installed SP-3. Even got the Wizard & seemed to go OK. Got prompt “Installation Complete, Need to restart.” I did. I got a black screen with text:
    Windows could not start because the following file is missing or corrupt:\Windows\inf\biosinfo.inf
    You can attempt to repair the file by starting Windows setup using the original setup CD-ROM. Select ‘r’ at the 1st screen to repair.
    I used the power button to shut down Windows & then booted into Mac OS X normally.
    I think I need to restart my Mac into Windows (using the Option key ) WHILE THE WINDOWS XP installation CD is in the optical Drive. Then maybe I’ll get a choice to select ‘r’ to repair at the 1st screen?
    Has anyone done this with a similar error & successfully repaired their Windows installation? I don’t know if this is a Boot Camp problem or not. XP SP 2 had been working just fine.
    Thanks for any help.

    Solved! It apparently was NOT a Boot Camp Issue. The fix was to obtain the file “biosinfo.inf” and from the Mac side, go into my WIndows XP HDD & add that file to: Windows/INF folder. (Yes, it was missing). Why my XP SP2 installation worked fine w/o this file is beyond my knowledge. Perhaps this file is needed only when doing a type of major update yet not needed for simply starting & running Windows? There are web pages stating that upgrading to SP 3 can cause this problem if using 3rd party software such as Norton Anti-Virus (I don’t have that but DO have Zone Alarm). There are also various complicated, long fixes out there. For me, replacing that file did the trick & everything seems fine now. (As far as where one “obtains” that file--long story)
    Message was edited by: growler62000

  • Changed Password Not working after restart[What to do]

    Recently I've changed my password, but it's not working after restart.
    I've noticed that, input option is not taking one of the password characters which is '!'.
    I've the recovery disks, system accepts my fingerprint too.
    Any help will be highly appreciated.
    Thanks.

    Hello,
    Let me explain you what happened.
    One evening I was trying to open my ThinkPad. Usually it asks for
    fingerprint or password(I'm not sure which password, power-on/hard
    drive). But this time I failed using my finger. and I tried with
    password, but could not recall.
    Then I restart and again tried with finger, this time it worked. Now
    after login in Windows XP I removed all old fingerprints and create
    few new. When I create new, it was asking for password, or new
    password to replace. As I could not recall the pass, I've given new
    password to replace.
    Now to check I gave a restart. Fingerprint accepted for Power-on but
    also asking for password again(Now I can see it's for Hard Drive). I
    tried with new password. But it's not working. And even not taking one
    character ('!') of the password.
    Now can you tell me, if I did change password for Hard Drive in the
    last description. Or is that possible to change it from Windows XP
    environment. Else it's possible that the Hard Drive password remain as
    it was which has been set from ThinkVantage before OS boot. Let me
    know if you've any query which I've missed.
    Thanks.

  • Panorama settings are not retained after restart.

    In 4.0, the Panorama settings are not retained after restart. The tabs that make up the Panorama settings are retained after restarting Firefox. Any suggestions?

    App tabs and Tab Groups (Panorama) are stored as part of the session data in the file sessionstore.js in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder]
    * http://kb.mozillazine.org/Session_Restore
    Make sure that you do not use [[Clear Recent History]] to clear the "Browsing History" if Firefox is closed.

  • Time Capsule not mounting after Restart

    I have only used Time Capsule for 2 days. However, it does not mount after Restart. I have to manually go in to the Time Machine Preferences and choose it again as the backup disk. Is anyone else having this issue, or is that the way it is supposed to work? Please help.

    I can see where you're coming from. I have just invested in an iMac with iLife08 , iWork08 and .Mac
    I saw getting this Time Capsule as the logical last step in this splurge.
    I still have an old Dell desktop WIN 95 vintage which is still chugging along, VERY slowly, its specs having been increased way beyond what its makers ever planned.
    I think (hope) this Time Capsule saga is a bit of a blip, superimposed on software (Time Machine) which has not been fully ironed out yet.
    As you say, "Works straight out of the box" and "one click and thats it" are statements one took for granted with Apple,but with a big push coming from the suits, perhaps things are shipped too early.
    From what I had heard of Apple, I would have expected better.
    It was amazing to read the frustrations of Mac veterans in their efforts to get the Time Capsule up and going - and they appeared to know what they were on about.
    I have to admit that I wasn't quite sure at first what exactly I was installing, but settled for a wireless external drive on my existing network, which doesn't have any other Apple products.
    Even that setup has gremlins.
    I am hoping that soon one of the mags will devote a feature on clearing the decks and starting from scratch with DETAILED instructions. I found that the installation bumpf which came with this brick stopped at the point where things got tricky.
    Keep the faith!

  • Content block not saved after restart firefox in windows 7

    We know there is an option to block content like images by right click on it and select "block images from xxx.xxx.com", first time it worked and checked it from the menu, tools-options-content-exception (load images automatically) and the item is there. But After restart firefox its gone. dont know why? Pls help. (all other setting is ok and saved).
    Using Windows 7 Ult, Firefox 3.
    == This happened ==
    Every time Firefox opened

    Yes, I used clear recent history, with Site Preferences. Dose this anything to do with it?

  • Windows Services not working, nmbd stopping

    Hi all,
    I encounter a strange problem.
    I'm currently trying to install a Mac OS X Server System on a Xserve and XRaid. This to remove a Win2K Server with AD on and Exchange working on it.
    I set my server in OD master, import accounts from the AD, replaced Exchange with Kerio etc ...
    But when i try to use Windows services, smbd always working fine (file sharing is ok), nmbd stopping. So i can't use it as a PDC server because the domain i create disappears with the crash of the nmbd process. In fact nmbd seems to stop after nmblookup requests.
    I've to say that the Win2K server is not stopped.
    I installed lots of OS X Server as Windows PDC and it has always been working fine.
    I also tried to activate Windows Service as "linked to Active Directory" and as "Standalone Server" and it resulted the same issue.
    Does anyone had an idea ? I thought that it could be a problem with the Win2K requests and crashing my nmbd with nmblookup.

    I'll try these things tomorrow to see what happens :
    - Change the "os level" setting to something high in /etc/smb.conf . (because of the Win2K Server).I'll set this to 255.
    1. Make sure that DNS is running on your server. Make sure that the server has a dns entry for itself.
    2. Ideally "Workgroup Master Browser" and "Domain Master Browser" should both be enabled. An aside, this did not interfere with my seperate AD domain on the same network.
    3. Enable WINS on your server.
    4. Configure WINS on Windows clients to point to server.

  • Oracle and Instance Service Not Starting After Win2K Service Pack 4 Install

    Please help
    We are running Oracle 8.1.6 on Windows 2000 Server and everything ran fine. Our Network Admin installed Windows service pack 4 and now after a reboot we have to manually go in and start Oracle because it does not start automaticially.
    I've looked everywhere and cannot find any documented resolution to this problem.
    Regards,
    Andy

    If you completely patched your server then it might be related to the problems some of us are experiencing with a certain MS patch. Check this thread for more details:
    ORACLE NOT AVAILABLE..ORA 01034

  • Runtime Service not Available after Copy

    Hi
    OWB 10g,
    Oracle DB 8.1.7.4.12
    I'm trying to copy the whole database, including all OWB and Runtime Repository and reload to another server.
    After that, OWB client works fine but when I try to connect Deployment Manager, the error massage shows: Runtime Service not Availabe. ( the Runtime connection properties are changed to match the new server). I then tried to manually start the runtime service, the error massage shows: Not available. And I then run Service_Doctor, it shows "Platform Service Not Available".
    For what I searched from metalink and here, the solution is always saying 'Reinstall the Runtime Service'.
    Is there any idea that I can make it work without reinstall because I don't want to start from scratch to redeploy and reload all of my data?
    I'm waiting on line.
    Thank you,
    Daming

    Hi Igor,
    I manually change table wb_rt_servuce_nodes with the proper hostname, service name, OWB home name. Also check the value in OWBRT_SYS.OWBRTPS, no problem. But Runtime service still not started. So I give up and then try to do it from scratch.
    I tried to reinstall all the repositories (OWB and runtime ) on the new server and still got the same problem.
    What I've done is drop all the repositories via Runtime Assistant and then done 'drop user rtr cascade' from sqlplus for all the target schemas and rtr/rtu. Then create new reopositories again. After that I restart the database , runtime service not started. Then I tried manually start it, failed.
    Anyidea? Should I reinstall the software?
    Thanks,
    Daming

  • Certain applications will not open after restart or waking up from sleep

    My Macbook Pro running 10.9.2 won't open certain applications after restarting and sometimes after waking up from sleep. Google Chrome, Logic Pro X, Adobe Photoshop and Premiere seem to be the only progams affected. Firefox and Safari both work fine as well as many other applications. It seems to only affect programs that connect to the internet.
    After a period of time the issue will resolve itself; sometimes after a few minutes and other times after several days. Then, these applications suddenly begin working again. I have also been having issues with my computer's ability to wake up. My best guess is that my computer isn't "fully waking up" upon restarts or when coming out of sleep mode. Both of these issues began around the same time and could be related. I've had both problems for several months through multiple software updates.
    As far as troubleshooting goes I have done the following:
    Safe Boot - (all programs work but are not effective due to lack of drivers being utilized in safe mode)
    RAM/PRAM reset.
    Disk Utility/Repair Permissions/Verify Disk
    Any help or advice would be VERY appareciated.

    Robin,
    It sounds like your MacBook is logging out when the computer goes to sleep if you are getting the login window, which will of course close all your programs.
    In System Preferences >Security, uncheck "Log out after.....minutes of activity".
    See if this stops it from doing that.

  • Average Active Sessions graph not updated after restart

    Hi,
    I just wanted to ask - I have restarted a database (11.1.0.7) with GC 11.1.0.1 but after the restart of the db the graphs on a performance tab are not updated. It means that the doesn't refresh and doesn't show actual data...
    I checked jobs on the target database and GC repository but nothing is broken. Info on Home tab of the target DB is actual but not the graphs..
    I also tried to clearstate and restart the agent but no change..
    Any idea?
    Thanks

    This is a bug and can be solved by applying
    Patch 10307099: PERFORMANCE CHARTS DO NOT UPDATE AFTER DATABASE IS RESTARTED
    This patch is included in the july 2011 PSU: Grid Control Patch Set Update 11.1.0.1.4 for the Oracle Management Service, see MOS doc ID 1334286.1
    Eric

  • Could Calendar services not available after reboot be LDAP problem?

    I followed this installation guide:
    https://wikis.oracle.com/display/CommSuite7U2/Communications+Suite+on+a+Single+Host+%28Linux%29#CommunicationsSuiteonaSingleHost%28Linux%29-InstallingCommunicationsSuite7Update2Software
    I have successfully installed and set up the Oracle UCS Sun7 update 2 server. Calendar works ( if I don't reboot the server ).
    However, when I reboot the server, Calendar service is unavailable.
    Important information for when I installed Oracle UCS sun 7 update 2 by following the installation guide:
    I have noticed when browsing through the folders, that there was already a 'dsee6' folder for the Oracle Linux I started from. Following the example installation for the Oracle Linux 5 with GlassFish install, I was instructed to download a new Directory Server. Following the instructions on page 7 of the install guide listed above, I made another folder 'dsee7'. I am wondering if I should never have downloaded this new Directory Server as instructed on page 6 "Get the Software". The install guide actually does not mention where to get the Directory Server from, so I just went to the edelivery site and figured it out myself. Anyways, under the "Installing and Configuring Directory Server" section, #3, I was instructed to "mv dsee7 /opt/sun/directory". In this folder, /opt/sun/directory/bin, there will be "./dsadmin" utility that can be ran. This is used to do many things with the Directory Server including starting it. Here is how I started it:
    cd /opt/sun/directory/bin
    ./dsadm create /var/opt/sun/directory/dsins1
    ./dsconf create-suffix "0=isp"
    Also, I downloaded the Directory Server from edelivery - Oracle Directory Server Enterprise Edition 11gR1 Patch Set 1 for Linux x86-64
    Then, I ended up running to get it set up:
    ./dsccsetup ads-create
    ./dsccsetup war-file-create
    $ ./dsccsetup cacao-reg
    ./dsccsetup status
    Then, it looked like the dcss agent is registered in cacao.
    So, if we forward ahead to page 9 of the install guide, "Preparing the Directory", I ran this and prepared the directory. After I finished installation, I could restart the Directory Server with no problems, as long as I did not reboot the machine. I would restart the Directory Server like so:
    cd /opt/sun/directory/bin
    ./dsadmin stop-domain domain1
    ./dsadmin start-domain domain1
    However, if I rebooted the machine, I could still start and stop the Directory Server as noted. But, the Calendar Services were not available.
    The only reason I wonder about this LDAP Server possibly being the cause of this is because I had at one point configured the services to start on boot. I followed these instructions:
    https://wikis.oracle.com/display/CommSuite7U2/Start+and+Stop+Scripts+for+Communications+Suite+%28Linux%29
    I am using a VMSphere client to host this set up. So, since that point of configuring the services to start up, I have rolled the snap shot back so that the services are no longer set up to start on boot. But, when they were, and I rebooted the machine, I could see ldap 389 errors all over the place. So, that lead me to roll my snap shot back in effort to try and fix the ldap errors. I no longer get LDAP errors since I rolled my snap shot back. But, like I said, I no longer have any of the services, including the LDAP, to start on boot as noted in the above link that instructs us how to do this.
    After reboot, I run these commands to get the server up and running:
    Start GlassFish server:
    cd /opt/sun/SUNWappserver/bin
    ./startserv
    Start web ( Messaging Server I think ):
    cd /opt/sun/comms/messaging64/bin
    ./start-msg
    Start LDAP ( Directory Server )
    cd /opt/sun/directory/bin
    ./dsadm start /var/opt/sun/directory/dsins1
    Start Mysql
    cd/etc/init.d
    ./mysqld start
    All of those commands complete without problem. I can log into the convergence web, I can hit the delegated administrator, I can log into the GlassFish admin console, and I can see my calendar folder when I hit it in the web ( http://myServer.com/davserver/dav/home/userName/calendar/ ).
    So, in summary, I am wondering if anyone knows if this supposed second Directory Server is causing my problems since I started with Oracle Linux 5 and Oracle Linux 5 appeared to have the folder dsee6 already installed with it. Could this be why my calendar services are not starting after reboot but are working before reboot?
    ( Also, all of my posts keep getting deleted. Can someone please email me if someone from Oracle is deleting my posts and tell me why they are getting deleted? )
    Edited by: ntfytim16 on Mar 5, 2012 7:41 AM
    Some of my steps were out of order. Cleaned them up so it is easier to understand.

    Here is my error0.log which is in the /var/opt/sun/comms/davserver/logs folder:
    =========================
    Last packet sent to the server was 0 ms ago.
    SEVERE [2012-03-01T05:10:26.033-0500] <...DavServer.loadBackend> failed to instantiate or create backend com.sun.comms.davserver.backends.BackendException: Cannot get Initial Database Information: java.sql.SQLException: Error in allocating a connection. Cause: Connection could not be allocated because: Communications link failure
    Last packet sent to the server was 0 ms ago.(OPERATION_NOT_SUPPORTED)
    INFO [2012-03-01T05:10:26.033-0500] <...DavServer.loadBackend> Loading backend ischedulebackend with backendid ischedulebackend
    INFO [2012-03-01T05:10:26.034-0500] <...DavServer.loadBackend>      JDBC JNDI Name = jdbc/ischedulebackend
    SEVERE [2012-03-01T05:10:26.177-0500] <...JdbcBackend.queryDatabaseType> Cannot get Initial Database Information: java.sql.SQLException: Error in allocating a connection. Cause: Connection could not be allocated because: Communications link failure
    Last packet sent to the server was 0 ms ago.
    SEVERE [2012-03-01T05:10:26.177-0500] <...DavServer.loadBackend> failed to instantiate or create backend com.sun.comms.davserver.backends.BackendException: Cannot get Initial Database Information: java.sql.SQLException: Error in allocating a connection. Cause: Connection could not be allocated because: Communications link failure
    Last packet sent to the server was 0 ms ago.(OPERATION_NOT_SUPPORTED)
    INFO [2012-03-01T05:10:26.209-0500] <...DavServer.loadBackends> iSchedule enabled
    WARNING [2012-03-01T05:10:26.209-0500] <...DavServer.loadBackends> iSchedule URI is configured but can't find ischedule backend.
    SEVERE [2012-03-01T05:10:29.567-0500] <...LDAPSingleHostPool.buildConnection> buildConnection: got LDAPException while connecting to Pool number:0. Host=myServer.com :netscape.ldap.LDAPException: failed to connect to server ldap://myServer.com:389 (91)
    SEVERE [2012-03-01T05:10:29.568-0500] <...LDAPSingleHostPool.buildConnection> buildConnection: got LDAPException while connecting to Pool number:0. Host=myServer.com :netscape.ldap.LDAPException: failed to connect to server ldap://myServer.com:389 (91)
    WARNING [2012-03-01T05:10:29.568-0500] <...LDAPFailoverPool.getConnection> Fatal Error: All LDAP servers are down.
    ======================
    Does that look like an LDAP issue to you?
    "Fatal Error: All LDAP servers are down."
    Edited by: ntfytim16 on Mar 5, 2012 10:13 AM
    Changed one server address

  • Window size always changes after restart in 10.9.2. How can I fix it- as in older OS-Versions?

    Hi,
    I'm using OSX for a long time. Now I bought a new MBA 10' with Mavericks 10.9.2. I'm really tired about ever changing window sizes after restarting my MBA, espacialy the sidebar is skipping to a wider size, then the window, I used before turning the mac of. No window opens, in exact that size I used before. Of course, I used to fix it, but never menaged to do so.
    Have you any idea to solve my problem?

    Do you uncheck the "Reopen windows when logging back in?" box? If so, does the issue occur when you leave the box checked?
    That might be the culprit.
    I hope I solved your question.
    Austin

Maybe you are looking for

  • HP LaserJet Pro PW1102W Networking Issue

    Hi, We had some issue with our network provider recently and now back online however the wireless function on the printer does not work. I have tried following numerous steps outlined online with no luck, details below. Actions Taken: 1) Uninstall /

  • My Computer won't load from Globe and Folder

    Another issue has yet arose. When I started my computer this morning I got a Blue Globe and a gray background and then the globe will change to a Mac folder and then to a question mark. I tried taking the hard drive out and checking it and repairing

  • Windows 7 Professional -- Which Version?

    I noticed there are many versions of Windows 7 Pro on Newegg.  I know I need to get 64 bit, but do I buy the full version or the "OEM for system builders". Is the version at this link what I want? http://www.newegg.com/Product/Product.aspx?Item=N82E1

  • Canon HF10 avchd file will not transfer in Log and Transfer window

    Hello- I just installed Final Cut Express 4 on my MacBook (intel core due with 4gigs ram... running snow leopard/ 10.6.1) and I cannot get any video to load in from my Canon Vixia HF10. When using the Log & Transfer window my camera is recognized and

  • No action

    Hi I have a menu page like this International reports(this has link so no issue) national reports(this has drope down containing various states like abc,def,ghi,jkl,mno,pqr,stq) Now i click on national report of state "abc".it shows the report of tha