Windows service of WWI server doesn't start

Hello all,
I'm installing a WWI generation server (EHSWWI32_26-20000084 on a Windows Server 2008 R2(SP1)) for ECC 6.0.
Now I have a problem with starting windows service.
I installed WWI in the following path.
  E:\EHS\WWI
Word version is 2003.
The installation (CGSADM) is finished without problem, and the management server works fine.
But service EHS_WWISRV, which is a service of wwi generation server, fails to start with following messages.
<event log 1>
The initialization process for the EHS_WWISRV_ST1_ST1_01 service failed.  Switching Desktop for Word failed!
<event log 2>
WWI started at: 08/03/11 10:48:37 as PID: 1132
Initialisation........start
Working dir is: E:\EHS\WWI
Current PATH is: C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;E:\EHS\WWI
  Attaching service to desktop winsta0 / default
    session: 0
    window station: Service-0x0-e34639$, desktop: Default
Error opening window station winsta0
Windows-Error 5 in SetDesktop/OpenWindowStation: (null)
Error setting window station winsta0
Windows-Error 6 in SetDesktop/SetProcessWindowStation: (null)
Error Attaching service to desktop winsta0 / default
I have no idea what "Switching Desktop for Word failed!" means.
Does anybody know how to fix the error?
Thank you in advance for your support.
Regards,
Kazuma

I could fix the error.
SAP Note 580586 helped me.
WWIUSER wasn't a member of the administrators group, and that caused the error.
Thanks all.

Similar Messages

  • Server doesn't start after applying SP3

    Hi,
    after applying SP3 the server doesn't start.
    I just get the following error within the server log.
    Any hints ?
    Regards
    Gerald Eder
    JVMX version - May 20 2007 23:27:34 - 01_REL - optU - windows amd64 - bas2:78002 (mixed mode, sharing)
    (CompilerOracle exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources)
    (CompilerOracle exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain)
    (CompilerOracle exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub)
    (CompilerOracle exclude com/sapportals/portal/prt/util/StringUtils escapeToJS)
    (CompilerOracle exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices)
    (CompilerOracle exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile)
    (CompilerOracle exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup)
    (CompilerOracle exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue)
    (CompilerOracle exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode)
    (CompilerOracle exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode)
    (CompilerOracle exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects)
    (CompilerOracle exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement)
    (CompilerOracle exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence)
    (CompilerOracle exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations)
    (CompilerOracle exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto)
    (CompilerOracle exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects)
    The active factory is : com.sap.engine.boot.loader.StandardClassLoaderFactory
    Using an index file : D:\usr\sap\TC1\J20\j2ee\cluster\bin\index.list
    [GC [ParNew: 14592K->4114K(29120K), 0.0102761 secs] 14592K->4114K(116544K), 0.0103466 secs]
    Reading kernel properties from kernelProperties.bin file...
       Checked the data for 32 ms.
       Read the objects for 250 ms.
       Substituted the values for 47 ms.
    Finished reading kernel objects for 297 ms.
    StartupFramework returned mode [NORMAL]
    StartupFramework returned action [NONE]
    SAP J2EE Engine Version 7.10.3301.162847.20070927153007 is starting...
    Loading: LogManager ... 578 ms.
    Loading: PoolManager ... 0 ms.
    Loading: ApplicationThreadManager ... Error - ID:000004. System is halted. Exception is:
    java.lang.NoClassDefFoundError: com/sap/jvm/Capabilities
         at com.sap.engine.core.thread.impl3.ErrorQueueHandler.<clinit>(ErrorQueueHandler.java:34)
         at com.sap.engine.core.thread.impl3.ThreadManagerImpl.init(ThreadManagerImpl.java:204)
         at com.sap.engine.core.Framework.loadSingleManager(Framework.java:665)
         at com.sap.engine.core.Framework.loadManagers(Framework.java:367)
         at com.sap.engine.core.Framework.start(Framework.java:296)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.sap.engine.boot.FrameThread.startFramework(FrameThread.java:161)
         at com.sap.engine.boot.FrameThread.run(FrameThread.java:183)
         at com.sap.engine.boot.StartFrame.work(StartFrame.java:101)
         at com.sap.engine.boot.Start.main(Start.java:33)
    Caused by: java.lang.ClassNotFoundException: com.sap.jvm.Capabilities
    Loader Info -
    ClassLoader name: [system:Kernel]
    Living status: alive
    Direct parent loaders:
       [library:core_lib]
    Resources:
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\jenqulib.jar
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcantlr~runtime.jar
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcblcachemgmtapi_for_assembly.jar
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcblcachemgmtimpl.jar
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcblcache_pluginslib.jar
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcblframekrn.jar
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcbljkernel_cacheimpl.jar
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcbljkernel_classloadkrn.jar
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcbljkernel_clusterkrn.jar
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcbljkernel_configurationkrn.jar
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcbljkernel_databasekrn.jar
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcbljkernel_licensingkrn.jar
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcbljkernel_lockingkrn.jar
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcbljkernel_logkrn.jar
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcbljkernel_poolkrn.jar
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcbljkernel_servicekrn.jar
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcbljkernel_threadkrn.jar
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcblopensqlkernelimplOpenSQLKrn.jar
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcjeoffline_deployimpl.jar
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcjesessionmgmtimpl.jar
       D:\usr\sap\TC1\J20\j2ee\cluster\bin\kernel\sap.comtcseclikeylikey_assembly.jar
         at com.sap.engine.boot.loader.MultiParentClassLoader.loadClass(MultiParentClassLoader.java:259)
         at com.sap.engine.boot.loader.MultiParentClassLoader.loadClass(MultiParentClassLoader.java:228)
         at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:353)
         ... 13 more

    After upgrading the SAPVM the server starts

  • MDM Server doesn't start after upgrade to SP 5

    hi,
    i'm not used to sap services on windows hosts.
    After the Update from 7.1.04 to 7.1.05 the mdm server doesn't start. I found only a few logs (unter c:/usr/sap/SID/MDS00/work). Most of them from sapcpe (without errors or warnings). Only the sapstart.log contains a bit information:
    SAP-R/3-Startup Program
    Starting at 2010/08/16 21:29:18
    Startup Profile: "C:\usr\sap\MDM\SYS\profile\MDM_MDS00_mdmtest"
    Starting Programs
    (1684) Execute: C:\usr\sap\MDM\SYS\exe\uc\NTAMD64\sapcpe.EXE pf=C:\usr\sap\MDM\SYS\profile\MDM_MDS00_mdmtest list:C:\usr\sap\MDM\SYS\exe\uc\NTAMD64/mds.lst
    (976) Execute: C:\usr\sap\MDM\SYS\exe\uc\NTAMD64\sapcpe.EXE pf=C:\usr\sap\MDM\SYS\profile\MDM_MDS00_mdmtest list:C:\usr\sap\MDM\SYS\exe\uc\NTAMD64/shared.lst
    (3632) Execute: C:\usr\sap\MDM\SYS\exe\uc\NTAMD64\sapcpe.EXE pf=C:\usr\sap\MDM\SYS\profile\MDM_MDS00_mdmtest list:C:\usr\sap\MDM\SYS\exe\uc\NTAMD64/sapinstance.lst
    (2172) Execute: C:\usr\sap\MDM\MDS00\exe\mdmcpc.bat C:\usr\sap\MDM\SYS\profile\MDM_MDS00_mdmtest.INI C:\usr\sap\MDM\MDS00\config\mds.ini
    (3652) CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
    Process 3652 died unexpectedly, restarting process
    (3612) Restart CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
    Process 3612 died unexpectedly, restarting process
    (2364) Restart CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
    Process 2364 died unexpectedly, restarting process
    (3576) Restart CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
    Process 3576 died unexpectedly, restarting process
    (3588) Restart CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
    Process 3588 died unexpectedly, final process restart.
    Process will not be restated in the future because of frequent failure.
    (1396) Restart CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
    This isn't really much I can work with. In the sapmmc I found the Option Developer Trace. I try to 'switch it on', but there is no difference.
    With 7.1.04 the server was running well.
    I happy for any suggestions

    Hi,
    Please check out Note 1482822 - MDM Server not starting after MDM 7.1 SP05 was installed.
    hope it helps you.
    Best regards,
    sudhanshu

  • After i installed updates for my mac mini server, the web services for the server app wont start, it gives an error massage: "Error Reading Settings"

    After i installed updates for my mac mini server, the web services for the server app wont start, it gives an error massage: "Error Reading Settings"
    The system logs reads:
    Mar 29 22:06:25 server servermgrd[82]: servermgr_web:  Error Domain=XSServerFoundationErrorDomain Code=4 "Failed to read settings: Exception:
              undefined method `downcase' for nil:NilClass
              ." UserInfo=0x7fc547901080 {NSLocalizedDescription=Failed to read settings: Exception:
              undefined method `downcase' for nil:NilClass

    To check the local network for some of the common configuration problems, launch Terminal.app and issue the following diagnostic command:
    sudo changeip -checkhostname
    That'll report some local configuration information and then either no errors detected and no changes required, or it'll point to whatever configuration errors or issues it might detect.  That doesn't catch everything, but it catches the common errors.
    FWIW, 192.168.0.0/24 and 192.168.1.0/24 are poor choices for the local network, as VPNs are based on IP routing and IP routing gets tangled when the same subnet is used on both ends of the VPN. 192.168.0.0/24 and 192.168.1.0/24 are near ubiquitous in home networks and coffee shops.

  • Install window services for managed server

    hi all, i wanted to install window services for managed server. Can anyone advice me how to do it? My weblogic version is 10. Thanks in advance.

    Hi,
    Please refer to the following link....it might be helpful: http://weblogic-wonders.com/weblogic/2010/03/13/managed-server-as-windows-service/

  • J2EE server doesn't start (has been starting..) EP6SP9 on Windows XP Pro.

    I am trying to install EP6 SP9 sneak preview edition. Just I followed the instructions.
    Installation is successful. After that I installed PDK6(6090) using SDM. I also exported initial data objects to SLD.
    When I restart the from SAPMMC console, jcontrol.exe has been in "starting" state(indicating with yellow color). It doesn't start even afer couple of hours.
    Excerpt from <i>dev_jcontrol</i>
    JStartupStartJLaunch: program = C:usrsapJ2EJC00/j2ee/os_libs/jlaunch.exe
    -> arg[00] = C:usrsapJ2EJC00/j2ee/os_libs/jlaunch.exe
    -> arg[01] = pf=C:usrsapJ2ESYSprofileJ2E_JC00_epsystem
    -> arg[02] = -DSAPINFO=J2E_00_server
    -> arg[03] = -file=C:usrsapJ2EJC00j2eeclusterinstance.properties
    -> arg[04] = -nodeName=ID5454450
    -> arg[05] = -nodeId=1
    -> arg[06] = -syncSem=JSTARTUP_WAIT_ON_2772
    -> arg[07] = -jvmOutFile=C:usrsapJ2EJC00workjvm_server0.out
    -> arg[08] = -jvmOutMode=append
    -> arg[09] = -stdOutFile=C:usrsapJ2EJC00workstd_server0.out
    -> arg[10] = -stdOutMode=append
    -> arg[11] = -traceMode=append
    -> arg[12] = -locOutFile=C:usrsapJ2EJC00workdev_server0
    -> arg[13] = -mode=JCONTROL
    -> arg[14] = pf=C:usrsapJ2ESYSprofileJ2E_JC00_epsystem
    -> lib path = PATH=C:j2sdk1.4.2_08jrebinserver;C:j2sdk1.4.2_08jrebin;c:sapdbprogramsbin;c:sapdbprogramspgm;C:usrsapPython.;C:oracleora92bin;C:Program FilesOraclejre1.3.1bin;C:Program FilesOraclejre1.1.8bin;C:WINDOWSsystem32;C:WINDOWS;C:WINDOWSSystem32Wbem;C:Program FilesATI TechnologiesATI Control Panel;C:j2sdk1.4.2_08bin;C:softwaresnmap-3.81;C:usrsapJ2ESCS01exe;C:usrsapJ2EJC00exe;C:usrsapJ2ESYSexerun
    -> exe path = PATH=C:j2sdk1.4.2_08bin;C:usrsapJ2EJC00j2eeos_libs;c:sapdbprogramsbin;c:sapdbprogramspgm;C:usrsapPython.;C:oracleora92bin;C:Program FilesOraclejre1.3.1bin;C:Program FilesOraclejre1.1.8bin;C:WINDOWSsystem32;C:WINDOWS;C:WINDOWSSystem32Wbem;C:Program FilesATI TechnologiesATI Control Panel;C:j2sdk1.4.2_08bin;C:softwaresnmap-3.81;C:usrsapJ2ESCS01exe;C:usrsapJ2EJC00exe;C:usrsapJ2ESYSexerun
    [Thr 2776] JControlICheckProcessList: process server0 started (PID:4304)
    [Thr 3696] *** ERROR => MsIAttachEx: NiBufConnect to epsystem/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
    [Thr 3696] *** WARNING => Can't reconnect to message server (epsystem/3601) [rc = -100]-> reconnect [jcntrms.c    295]
    [Thr 3696] Thu Jul 07 09:46:50 2005
    [Thr 3696] *** ERROR => MsIAttachEx: NiBufConnect to epsystem/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
    [Thr 3696] *** WARNING => Can't reconnect to message server (epsystem/3601) [rc = -100]-> reconnect [jcntrms.c    295]
    [Thr 3696] Thu Jul 07 09:46:55 2005
    [Thr 3696] *** ERROR => MsIAttachEx: NiBufConnect to epsystem/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
    [Thr 3696] *** WARNING => Can't reconnect to message server (epsystem/3601) [rc = -100]-> reconnect [jcntrms.c    295]
    [Thr 3696] Thu Jul 07 09:47:00 2005
    [Thr 3696] *** ERROR => MsIAttachEx: NiBufConnect to epsystem/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
    [Thr 3696] *** WARNING => Can't reconnect to message server (epsystem/3601) [rc = -100]-> reconnect [jcntrms.c    295]
    [Thr 3696] Thu Jul 07 09:47:10 2005
    [Thr 3696] *** ERROR => MsIAttachEx: NiBufConnect to epsystem/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
    [Thr 3696] *** WARNING => Can't reconnect to message server (epsystem/3601) [rc = -100]-> reconnect [jcntrms.c    295]
    [Thr 3696] Thu Jul 07 09:47:15 2005
    [Thr 3696] *** ERROR => MsIAttachEx: NiBufConnect to epsystem/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
    [Thr 3696] *** WARNING => Can't reconnect to message server (epsystem/3601) [rc = -100]-> reconnect [jcntrms.c    295]
    [Thr 3696] Thu Jul 07 09:47:21 2005
    [Thr 3696] *** ERROR => MsIAttachEx: NiBufConnect to epsystem/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
    [Thr 3696] *** WARNING => Can't reconnect to message server (epsystem/3601) [rc = -100]-> reconnect [jcntrms.c    295]
    [Thr 3696] Thu Jul 07 09:47:26 2005
    [Thr 3696] *** ERROR => MsIAttachEx: NiBufConnect to epsystem/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
    [Thr 3696] *** WARNING => Can't reconnect to message server (epsystem/3601) [rc = -100]-> reconnect [jcntrms.c    295]
    [Thr 3696] Thu Jul 07 09:47:31 2005
    [Thr 3696] JControlMSConnect: reconnected to message server (epsystem/3601)
    [Thr 3696] Thu Jul 07 09:52:17 2005
    [Thr 3696] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 3696] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 3696] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 3696] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 3696] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 3696] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 3696] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 3696] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
    [Thr 3696] Thu Jul 07 09:57:24 2005
    [Thr 3696] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
    [Thr 3696] Thu Jul 07 10:02:25 2005
    [Thr 3696] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
    [Thr 3696] Thu Jul 07 10:07:45 2005
    [Thr 3696] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
    [Thr 3696] Thu Jul 07 10:12:46 2005
    [Thr 3696] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
    [Thr 3696] Thu Jul 07 10:18:06 2005
    [Thr 3696] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
    [Thr 3696] Thu Jul 07 10:23:07 2005
    [Thr 3696] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
    [Thr 3696] Thu Jul 07 10:28:27 2005
    [Thr 3696] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
    (Same lines repeated for every 5 minutes)
    MMC shows that all processes are running inclucing the message server
    C:usrsapJ2EJC00j2eeclusterinstance.properties
    ID5454400.ClassPath=./bin/boot/boot.jar:./bin/system/bytecode.jar:.
    ID5454400.Debuggable=no
    ID5454400.JLaunchParameters=
    ID5454400.JavaParameters=-Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Djco.jarm=1 -XX:NewSize=28m -XX:MaxNewSize=28m Xms170m -XX:+DisableExplicitGC -Drdbms.driverLocation=C:/sapdb/programs/runtime/jar/sapdbc.jar -Dsys.global.dir=C:/usr/sap/J2E/SYS/global/
    ID5454400.LogName=dispatcher
    ID5454400.MainClass=com.sap.engine.boot.Start
    ID5454400.MaxHeapSize=170
    ID5454400.Name=dispatcher
    ID5454400.Parameters=
    ID5454400.RootPath=C:/usr/sap/J2E/JC00/j2ee/cluster/dispatcher
    ID5454400.Type=dispatcher
    ID5454450.ClassPath=./bin/boot/boot.jar:./bin/boot/jaas.jar:./bin/system/bytecode.jar:.
    ID5454450.DebugMode=no
    ID5454450.DebugPort=50021
    ID5454450.Debuggable=no
    ID5454450.JLaunchParameters=
    ID5454450.JavaParameters=-Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -Dsun.io.useCanonCaches=false -Djava.awt.headless=true -XX:SoftRefLRUPolicyMSPerMB=1 -verbose:gc -XX:+PrintGCDetails -XX:+PrintGCTimeStamps -XX:+UseParNewGC -Xms512M -Xmx512M -XX:MaxNewSize=85M -XX:NewSize=85M -XX:+DisableExplicitGC -XX:MaxPermSize=192M -XX:PermSize=192M -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Drdbms.driverLocation=C:/sapdb/programs/runtime/jar/sapdbc.jar -Dsys.global.dir=C:/usr/sap/J2E/SYS/global/
    ID5454450.LogName=server0
    ID5454450.MainClass=com.sap.engine.boot.Start
    ID5454450.MaxHeapSize=512
    ID5454450.Name=server0
    ID5454450.Parameters=
    ID5454450.RootPath=C:/usr/sap/J2E/JC00/j2ee/cluster/server0
    ID5454450.Type=server
    bootstrap.ClassPath=./bootstrap/launcher.jar
    bootstrap.JavaParameters=-Djco.jarm=1 -Djco.jarm=1
    bootstrap.MainClass=com.sap.engine.offline.OfflineToolStart
    bootstrap.MaxHeapSize=128
    bootstrap.Name=bootstrap
    bootstrap.Parameters=com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0054544
    bootstrap.RootPath=C:/usr/sap/J2E/JC00/j2ee/cluster
    bootstrap.Type=bootstrap
    bootstrap_ID5454400.ClassPath=./bootstrap/launcher.jar
    bootstrap_ID5454400.JLaunchParameters=
    bootstrap_ID5454400.JavaParameters=-Djco.jarm=1 -Djco.jarm=1
    bootstrap_ID5454400.MainClass=com.sap.engine.offline.OfflineToolStart
    bootstrap_ID5454400.MaxHeapSize=170
    bootstrap_ID5454400.Name=dispatcher bootstrap
    bootstrap_ID5454400.Parameters=com.sap.engine.bootstrap.Bootstrap ./bootstrap ID005454400
    bootstrap_ID5454400.RootPath=C:/usr/sap/J2E/JC00/j2ee/cluster
    bootstrap_ID5454400.Type=bootstrap
    bootstrap_ID5454450.ClassPath=./bootstrap/launcher.jar
    bootstrap_ID5454450.JLaunchParameters=
    bootstrap_ID5454450.JavaParameters=-Djco.jarm=1 -Djco.jarm=1
    bootstrap_ID5454450.MainClass=com.sap.engine.offline.OfflineToolStart
    bootstrap_ID5454450.MaxHeapSize=512
    bootstrap_ID5454450.Name=server0 bootstrap
    bootstrap_ID5454450.Parameters=com.sap.engine.bootstrap.Bootstrap ./bootstrap ID005454450
    bootstrap_ID5454450.RootPath=C:/usr/sap/J2E/JC00/j2ee/cluster
    bootstrap_ID5454450.Type=bootstrap
    instance.enabled=yes
    instance.install.dir=C:usrsapJ2EJC00j2ee
    instance.ms.host=epsystem
    instance.ms.port=3601
    instance.osLibsPath=C:/usr/sap/J2E/JC00/j2ee/os_libs
    instance.runAction=NONE
    instance.runMode=NORMAL
    <i>syslog</i> has lot of error messages:
    SAP Basis System: Operating system call           recv failed (error no. 10054)
    When I counter this problem, I uninstalled and installed again. Still same problem persists.
    Any ideas?
    Thanks

    Real problem is log is full.
    To overwrite the log files run this:
    dbmcli [-n <hostname>] -d <databasename> -u <dbmuser>,<dbmuserpw> util_execute set log auto overwrite on
    Default MaxDB installation accepts (control, control) for (username, passwd)
    How to overwrite/remove log files?

  • When Starting OC4J, why the report server doesn't start automatically? !!

    Dear All,
    I have DS 10g on my system and I start the OC4J when I have to run either forms or reports.
    But when I attend to start the do the following command from the form:
    WEB.SHOWDOCUMENT(..../getjobid<jobid>?server=<servername>...), I have an error: FRM-41213: Unable to connect to the report server <servername>.
    I noticed that if I run the following URL:http://<server>:.../reports/rwservlet, it gives me a list of command, but the server still not running..But if I add any command to the above URL like for example "getserverinfo" or "showjobs" then the server is started. Now, and after the command, if we return back and we run the report from the form, the report will run successfully.
    The question WHY??
    Regards,
    Joe
    Message was edited by: Joe
    Joe Farah

    Hello,
    That's the way it works ...
    http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_strt.htm
    2.1.3.1 Starting the In-process Server (Windows and UNIX)
    If you are using Reports Server as an in-process server (the default configuration), sending a run report request starts the in-process server; however, if you are sending a request through a command line, the servlet must be invoked first using either the run report URL or the Web command URL. When you have successfully started the servlet, this also means you have successfully started the in-process server.
    If you use "Oracle Application Server", the "in-process" reports server will be started automatically by opmn ...
    Regards

  • Como puedo solucionar el siguiente mensaje al instalar windows: service apple mobile device failed to start. Verify that you have sufficient privileges to start system services.

    Despues de la ultima actualizacion de iTunes, sale el siguiente mensaje "the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem". Al dar clic en OK sale oro mensaje:"Itunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126). Cuando trato de reinstalar vuelve a mostrar un error:"Service apple mobile device failed to start. verify that you have sufficient priviliges to start system services".Alguien puede orientarme por favor?

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • HTTP Server Doesn't Start after install

    I just completed an install of the 10.1.3.1 Oracle App Server. It indicated that the install was successful. I can see in the log the BPEL Manager deploying in the default domain, but I do not see any reference to the HTTP server. Also, when I do a *./opmnctl startall* there is no HTTP_Server~1.log created.
    Is there a step I need to complete to enable the Apache server to start? I must be missing something - the Apache folder is there in the install folder.
    The *./opmnctl status* reports:
    Processes in Instance: AS02.ssg-st-bpel-build0-dev.vzbi.com
    ---------------------------------+--------------------+---------+---------
    ias-component                    | process-type       |     pid | status
    ---------------------------------+--------------------+---------+---------
    OC4JGroup:default_group          | OC4J:home          |   18970 | Alive
    ASG                              | ASG                |     N/A | DownI found the following in the installActions log:
    Install type for "Oracle HTTP Server 10.1.3.0.0 " is "Typical".
    # Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0  could be found. Missing component oracle.bc4j 10.1.2.0.0.
    # Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0  could be found. Missing component oracle.bc4j.oem 10.1.2.0.0.
    # Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0  could be found. Missing component oracle.soap.srv 2.2.0.0.2a.
    # Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0  could be found. Missing component oracle.apache.ejb 9.0.1.0.1.
    # Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0  could be found. Missing component oracle.apache.ojsp 10.1.2.0.0.
         Conflict while setting install type of "Oracle Process Management Notification 10.1.3.1.0 "  to "Typical (Typical)". Install type already set to "Complete (Complete)". Seting it to "Custom (Custom)".
    # Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0  could be found. Missing component oracle.dcm 10.1.2.0.0.
    # Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0  could be found. Missing component oracle.sysman.emd 10.0.2.0.0.
    # Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0  could be found. Missing component oracle.java.j2ee.iascfg 10.1.2.0.0.
    # Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0  could be found. Missing component oracle.logloader 10.1.2.0.0.
    # Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0  could be found. Missing component oracle.webdb.monitor 10.1.2.0.0.
    What am I missing?  Is there a package I need to install before installing the App Server?
    Edited by: BCurtis on Sep 24, 2010 3:22 PM
    Edited by: BCurtis on Sep 24, 2010 3:25 PM

    I now know I'm missing the <ias-component id="HTTP_Server"> in the opmn.xml file. The following is from an older install of a few years ago.
             <ias-component id="HTTP_Server">
                <process-type id="HTTP_Server" module-id="OHS">
                   <module-data>
                      <category id="start-parameters">
                         <data id="start-mode" value="ssl-enabled"/>
                      </category>
                   </module-data>
                   <process-set id="HTTP_Server" numprocs="1"/>
                </process-type>
             </ias-component>This explains why the startall doesn't start the HTTP Server, but why would the install not include the HTTP Server in the configuration?

  • J2ee server doesn't started in debug mode

    Hi.
    I set J2EE server debug mode using configtool and I try to start J2EE.
    At that time, dispatcher, SDM process started successfully but server process doesn't start.
    SAP MMC has "waiiting for start" status for server process.
    Any ideas ?
    Regards, Arnold.

    Right aside the Enable Debugging checkbox in the configtool, there's a 'Restricted Load Balancing' checkbox. As I remember, in some version of the J2EE engine, you need to invert its state in order to get debugging to run.
    Regards,
    Armin

  • Endeca Server doesn't start

    Hi,
    I'm using OEID 3.0 on an Oracle Linux virtual machine. Two days ago I've experienced an issue with Endeca Server: when I start the endeca server domain, launching the $ENDECA_DOMAIN/bin/startWebLogic.sh script the domain starts, but in the standard output I can see this error message:
    <17-lug-2013 11.03.18 CEST> <Warning> <com.endeca.opmodel.control.ClusterCoordinator> <OES-000056> <OES-000056: ClusterCoordinator process ended. Automatically restarting>
    1994415 [Thread-36-SendThread(localhost:2181)] INFO   [ClientCnxn] Opening socket connection to server localhost/127.0.0.1:2181
    1994416 [Thread-36-SendThread(localhost:2181)] WARN   [ClientCnxn] Session 0x0 for server null, unexpected error, closing socket connection and attempting reconnect
    java.net.ConnectException: Connection refused
      at sun.nio.ch.SocketChannelImpl.checkConnect(Native Method)
      at sun.nio.ch.SocketChannelImpl.finishConnect(SocketChannelImpl.java:599)
      at org.apache.zookeeper.ClientCnxn$SendThread.run(ClientCnxn.java:1143)
    1995685 [Thread-36-SendThread(localhost:2181)] INFO   [ClientCnxn] Opening socket connection to server localhost/127.0.0.1:2181
    1995685 [Thread-36-SendThread(localhost:2181)] WARN   [ClientCnxn] Session 0x0 for server null, unexpected error, closing socket connection and attempting reconnect
    java.net.ConnectException: Connection refused
      at sun.nio.ch.SocketChannelImpl.checkConnect(Native Method)
      at sun.nio.ch.SocketChannelImpl.finishConnect(SocketChannelImpl.java:599)
      at org.apache.zookeeper.ClientCnxn$SendThread.run(ClientCnxn.java:1143)
    <17-lug-2013 11.03.22 CEST> <Warning> <com.endeca.opmodel.control.ClusterCoordinator> <OES-000056> <OES-000056: ClusterCoordinator process ended. Automatically restarting>
    1997172 [Thread-36-SendThread(localhost:2181)] INFO   [ClientCnxn] Opening socket connection to server localhost/127.0.0.1:2181
    1997172 [Thread-36-SendThread(localhost:2181)] WARN   [ClientCnxn] Session 0x0 for server null, unexpected error, closing socket connection and attempting reconnect
    This message is repeated endlessy and the server isn't active.
    If I try to retrieve the list of data domains using the endeca-cmd command, the result is:
    [oracle@testbi endeca-cmd]$ endeca-cmd list-dd
    GRAVE: Error while invoking endpoint "http://localhost:7001/endeca-server/ws/manage" from client
    endeca-cmd encountered a problem.
    caused by:
    The Endeca Server returned an error: OES-000075: Caught exception when starting Endeca Server: null
    caused by:
    OES-000075: Caught exception when starting Endeca Server: null
      OES-000075: Caught exception when starting Endeca Server: null
    But if I try to digit in my web browser the url http://192.168.2.16:7001/endeca-server/ws/manage?wsdl I can see that the web services are active and I can display the xml.
    Can anyone help me please?
    Best regards,
    Samuele Scattolini

    Hi Samuele,
    Another issue might be related to the fact that you are running the deployment on a VM. Specifically, could it be that that the machines you were using aren't able to resolve the names to addresses?  We've seen this on VM machines - they seem to have two names configured, one of which is resolvable externally and one of which is only resolvable locally. If this indeed is the case in your deployment, try the following:
    1. Go to $MW_HOME/user_projects/domains/endeca_server_domain/config
    2. Check the contents of the EndecaServer.properties file, on all machines on which the Endeca Server is deployed. Specifically, see how the host on which the Cluster Coordinator should be running is configured.
    For example, in a three-node Endeca Server cluster, this line may read as in this example:
    endeca-cluster-coordinator-hosts=host1,host2,host3
    where host1, host2 and host3 are local host names of your machines.
    It is possible that if your machine is configured with a fully qualified domain name, such as host1.us.oracle.com, but the EndecaServer.properties file lists this machine as host1, then, due to the fact that it is a VM, the name is not resolvable.
    To see if this is the case, try changing this file to use another type of notation (say, switch from FQDN to a short name, or vice versa, depending on what is in your etc/hosts and ipconfig, and see if this works.
    Hope this helps,
    Here is a doc link about the EndecaServer.properties file: http://docs.oracle.com/cd/E37483_01/server.751/es_install/toc.htm#Changing%20settings%20in%20EndecaServer.properties
    It applies to a data domain cluster, but even in a single-node deployment, the Cluster Coordinator is still running, on this same node, and thus its host must be resolvable.
    Hope this helps,
    Julia

  • "Invalid printer specified" for 32bit Windows Service in 64bit Server

    Hi All,
    I'm having some issues with crystal reports.
    My development environment:
    Visual Studio 2008, 32bit Windows XP
    Running environment:
    Windows Server 2003 Service Pack 2 64 bit
    Crystal Reports Basic Runtime for Visual Studio 2008 (x86)
    I've created two applications: one is console application and one is windows service. Both application run same codes to print crystal reports to printers and run at 32 bit. I can have multiple instance of console application running without any issues. When I run the windows service version, the first time the service works fine. But after I restarted the windows server, the crystal report throw Sysstem.Runtime.InteropServices.COMException.
    The detail of the exception is:
    System.Runtime.InteropServices.COMException (0x80000201):
    Invalid printer specified.
       at CrystalDecisions.ReportAppServer.Controllers.PrintOutputControllerClass.ModifyPrinterName(String newVal)
       at CrystalDecisions.CrystalReports.Engine.PrintOptions.set_PrinterName(String value)
       at Company.PrintReport(ReportClass report, String printerName)
    Both console application and windows service run at 32 bits. The user runs the service is domain controller who has admin permission. And the same problem happened on an web application hosted on IIS of the same server.
    What I've done so far:
    1. Set the printer option in the report to no printer
    2. Try install the crystal report x64
    3. For the windows service build for x86.
    Please some one help me in this.
    Cheers

    That is a rather strange issue.
    Make sure you are killing the report object once you're doen with it. E.G;
    Dim report as New ReportDocument
    Protected Sub Page_load()
    End Sub
    Private Page_Unload()
    report.close()
    report.dispose()
    GC.Collect
    End Sub
    //C# (on form open):
    private void WebForm1_Init(object sender, System.EventArgs e)
        if (boReportDocument != null)
            boReportDocument.Close();
            boReportDocument.Dispose();
            GC.Collect();
    // C# on form close
    private void Page_Unload(object sender, EventArgs e)
            if (boReportDocument != null)
            { boReportDocument.Close();
                boReportDocument.Dispose();
                GC.Collect();
    If closing and disposing does not help, is htis happening on your dev computer or after you move that app to another server?

  • Reports server doesn't start after upgrade 11.1.1.2 - 11.1.1.6

    Hello,
    I've upgraded a Linux server from Weblogic 10.3.2 / Forms 11.1.1.2 to Weblogic 10.3.6 / Forms 11.1.1.6 and I have some problems with reports server.
    I can't use jobStatusRepository on my reports server.
    I've created a new one, and when I activate the Job Status Repository, server can't start.
    I've added this features from Enterprise Manager and I've build a new credential (I first have tried to redefine old ones).
    When I modify my rwserver.conf adding comments to jobStatusRepository section, my report server start (from opmnctl or from Enterprise Manager) but as soon I put on line the jobStatusRepository, it fails to start.
    My server is an Oracle Linux 5.
    I've done the same on another server (same releases) and it does the same ...
    Thanks for any help.
    Xavier Cabantous

    Hello,
    thanks for your reply.
    I've put level TRACE:32in traces but there is nothing interesting in log files :
    in console~rep11_nodhos~1.log =>
    12/06/09 21:02:10 Start process
    9 juin 2012 21:02:13 oracle.security.jps.internal.common.util.XmlSchemaValidationUtil$StrictErrorHandler warning
    ATTENTION: Echec de la validation du contenu XML. SchemaLocation: schemaLocation value = 'http://xmlns.oracle.com/oracleas/schema/11/jps-config-11_1.xsd' must have even number of URI's. Emplacement : line 2 column 272.
    but I've seen in other topics that we don't have to care to this Warning.
    in rwserver_diagnostic.log =>
    no errors messages, it ends with
    [2012-06-09T21:02:13.483+02:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 10] [ecid: 0000JVIc0PeFw000jzwkno1Fotqn000001,0] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] Multicast:registerReceiver Packet handler registered
    [2012-06-09T21:02:13.489+02:00] [reports] [NOTIFICATION:16] [] [oracle.reports.server] [tid: 10] [ecid: 0000JVIc0PeFw000jzwkno1Fotqn000001,0] ServerPacketHandler:start ServerPacketHandler started successfully
    I just have opened a SR on MetaLink

  • My server doesn't start without monitor (UEFI system)

    Hallo folks!
    I have a problem with my new Gigabyte J1800N-D2H motherboard: the computer doesn't start if there is no screens at the startup.
    I can't find any log about this fact...
    I can't connect with ssh, ping doesn't pong and there aren't R/ARP packages on the lan.
    Also I didn't find any option into UEFI system.
    What I could check?
    Thanks all
    Last edited by the9ull (2014-10-08 08:03:37)

    jasonwryan wrote:
    Can you more accurately describe the problem? You have sshd running, but when you boot if a monitor is not connected, you cannot ssh in?
    What does "computer doesn't start" mean? Doesn't boot at all? Boots but chokes at some point?
    I can't see where is the problem because the machine doesn't apprear online: no ssh, no ping; moreover, no logs were saved.
    On the other hand, if the monitor is connected no errors are shown

  • Oracle BAM server doesn't start up

    Hi, I have a BAM server in a cluster and start up sometimes and not others.
    When started shuts down unexpectedly.
    Logs files doesn't show errors.
    =============================================================================================
    startWebLogic.cmd console show a "million" times, stop when shutdown server
    "(Warning) (oracle.mds) (BEA-000000) (A call to flushChanges on the current MDSSession does not specify the correct transaction key)"
    ==============================================================================================
    startManagedWebLogic.cmd console show this:
    There are 1 nested errors:
    weblogic.management.ManagementException: [Management:141247]The configuration di
    rectory C:\Oracle\Middleware\wlserver_10.3\common\bin\config does not exist and
    the admin server is not available.
            at weblogic.management.provider.internal.RuntimeAccessImpl.parseNewStyle
    Config(RuntimeAccessImpl.java:200)
            at weblogic.management.provider.internal.RuntimeAccessImpl.<init>(Runtim
    eAccessImpl.java:115)
            at weblogic.management.provider.internal.RuntimeAccessService.start(Runt
    imeAccessService.java:41)
            at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesMan
    ager.java:461)
            at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServ
    icesManager.java:166)
            at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:881)
            at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:568)
            at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:469)
            at weblogic.Server.main(Server.java:71)
    >
    <16/04/2014 11h'07 ART> <Notice> <WebLogicServer> <BEA-000365> <Server state cha
    nged to FAILED>
    <16/04/2014 11h'07 ART> <Error> <WebLogicServer> <BEA-000383> <A critical servic
    e failed. The server will shut itself down>
    <16/04/2014 11h'07 ART> <Notice> <WebLogicServer> <BEA-000365> <Server state cha
    nged to FORCE_SHUTTING_DOWN>
    Thanks!

    See the below error :
    The configuration directory C:\Oracle\Middleware\wlserver_10.3\common\bin\config does not exist and  the admin server is not available.
    It clearly mentions that config.xml file was not found - which is needed for the Admin Server to start. Check in the above location if one exists or not.

Maybe you are looking for

  • What should I do about an icon, "Rebuilt Library" that appeared when I "grabbed" the top of my iPhoto window?

    The icon appeared when I "grabbed" the top of my iPhoto window to move it across the desktop. I don't want to delete important files, and wonder what I should do about the icon. I am using Time Machine.

  • Which File System should I use?

    Which is the best file system to use on a drive, baring in mind the following requirements: * Read AND write compatibility on both Mac & Windows systems. * Individual file sizes will often exceed 4GB (ruling out the FAT file systems). * The drive is

  • Mail port setting for .Mac?

    I use Mail for my .Mac account and usually have no problem sending e-mails. However, whenever I am on campus at school I am unable to send out any mail (and thus my messages are always moved to the Outbox but never sent out). Once I reconnect off cam

  • Jar file downloaded using FTP gets damaged

    Hi people, Am working on a solution that implements an auto update of an application developed using Java. I am using Apache commons package for downloading the updated JAR file from an FTP site. Once I have the new JAR file on my local machine, I do

  • Nikon Camera Raw & JPEG

    I have had LR since it's inception - however because of Adobe's resistance to using the JPG in the RAW files and applying the in camera se3ttings - I have not used it. I have since signed up for the Cloud Services and LR is once again on the desktop