Windows service start and stop automatically

i'm trying to start windows service, which i installed via running beasvc with parameters. everything used to work fine, but yesterday somthing broke up: i press the start button in the control panel, service tries to start, but then it stops and the following message appears: "Weblogic 9.0 Workspace Service service on Local Computer started and then stopped. Some services stop automatically if they have no work to do, for example, the Performance Logs and Alerts service." sometimes it stops right after starting without giving any messages.
any ideas what's wrong with it&

If I run from a cmd box it shows a successful start, however when I look at the services through the MMC it is not started. Basically, it starts successfully and then immediately shuts off stating the message in the original post. This is after and only after I apply sp7 for BEA 7. If I roll the server back to just v 7, I don't have a problem. I have downloaded V7 twice, and I get the same result. I have followed the install instructions to a T and still the same result. I have also tested removing the user created pages, and I get the same exact error telling me either it's a generic error or, SP7 has issues. The only reason we are rolling to SP7 is because of a security issue, but for the time being we have locked down the firewall. Any other suggestions? I have had my Maximo Administrator contact BEA, and MRO about this problem (Maximo is the only system we use web logic for) and they default to the answer that it is a java issue. That V7 is not supported above java 1.3.xxx which is bull because we were running version 1.4, due to a security issue with JVM 1.3 and all worked well. I have replicated the install with JVM 1.3xxx for BEA 7 sp 7, and that did not solve the problem either. Sorry for the long post I just wanted to try to get all the info out.
Thank you for you time and consideration
Tanner

Similar Messages

I am getting a service start and stop alert while doing the windows server updates.

HI
I am getting a service start and stop alert while doing the windows server updates. Services are wmiApSrv , WPDBusEnum. Can you please help me to under stand why i am getting the service start and stop alert.
Thanks & Regards
Abhilash K Joy

Hi,
The WMI Performance Adapter (wmiApSrv) service provides performance library information from Windows Management Instrumentation (WMI) providers to clients on the network. This service only runs when Performance Data Helper is activated.
This service is installed by default and its startup type is Manual. When started in the default configuration it will log on using the Local System account.
You can try troubleshooting the issue using Clean Boot to check if the issue is related to third-party software.
How to perform a clean boot in Windows
http://support.microsoft.com/kb/929135/en-us
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Apple mobile device service started and stopped

my iPod touch cant be synced or even recognized on my iTunes and it says i gotta *start the apple mobile device service*.
i finally found it and it tells me that *"apple mobile device service started and stopped..."*
how can i fix it?
help!!!!

Hello and Welcome to Apple Discussions.
Follow the instructions in this article:
http://docs.info.apple.com/article.html?artnum=307078
mrtotes

How to create services start and stop automation script for diff servers

Hi All,
i want to create a bat file for automation purpose to start and stop services
i have some services in 1st server aand some in 2nd server and some in 3rd servers.
has you all know i have to follow sequences to start and stop services can any help me in creating .bat by linking 3 servers fo starting and stoping services.
Thanks in advance
Regards
SM

Hi,
this is the list of start oder for services in 11.1.2.1 from the Installation and Configuration Guide
1. Databases for repositories.
2. Any corporate user directories that you plan to configure for use with Shared Services.
3. Foundation Services Managed Server application server, which includes Shared Services,
and EPM Workspace.
4. Reporting and Analysis Framework — Agent Service (if required for your environment)
5. Reporting and Analysis Framework Application Server (if required for your environment)
6. Web server
The remaining services and processes can be started in any order:
1. Performance Management Architect Services
2. Performance Management Architect application server
3. Performance Management Architect Data Synchronizer application server
4. Essbase Server
5. Administration Services application server
284 Starting and Stopping EPM System Products
6. Integration Services Server
7. Essbase Studio Server
8. Provider Services application server
9. Financial Reporting Services
10. Financial Reporting application server
11. Web Analysis application server
12. Calculation Manager application server
13. Planning application server and the Hyperion RMI Registry
14. Financial Management service
15. Financial Management Web application server
16. Strategic Finance service
17. Performance Scorecard application server
18. Performance Scorecard Alerter application server
19. Profitability and Cost Management application server
to start services on different servers you can use the sc command in your batch file
for eg
sc \\10.121.201.21 start HypS9FrameworkAgent

How to back window 8 from window 8.1 and stop automatic window updates

Hello Sir,
                          In my laptop automatically update window 8 to window 8.1. but last time massage show if you click ok then your window 8.1 sucessfully update.
                         Sir, I want to 3-4 before days my computer that stage. he will be come back.
                           And how to switch off Window update.
                         Please sir, sent me recovery or restore procedure those are not harm my computer.
               Thanking You
                Ranjeet

ranjeet_jaina wrote:
Hello Sir,
                          In my laptop automatically update window 8 to window 8.1. but last time massage show if you click ok then your window 8.1 sucessfully update.
                         Sir, I want to 3-4 before days my computer that stage. he will be come back.
                           And how to switch off Window update.
                         Please sir, sent me recovery or restore procedure those are not harm my computer.
               Thanking You
                Ranjeet
Turn off Windows update , follow this.
Also go through this thread, try the suggestion from HP Expert @Nuccii
To do System recovery, follow this - try System refresh instead of Factory reset so that data, files and settings would be preserved. Nevertheless always backup all your data to an extrenal hard drive before doing any sought of recovery.
System restore won't help if you've upgraded from Windows 8 to 8.1 & want to go back to 8.
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Start and stop a loop automatically subtracting at each iteration

Hi there,
I know that there are some topics about it, but I could not find any solution, especially because I use the version 7.1 and cannot open new version files.
My problem is as follows:
I need to charge a tank from 6 to 10 in the morning, every day during 3 days. The process must start and stop automatically, which means, no bottoms to start or stop. The start and stop conditions come from the hour.
I start with a big loop of 72 iterations, which corresponds to 72 hours.
The tank must start at level 6 every time it starts.
After the start, 1 unit must be subtracted in each iteration. Which means, that at 6 am the tank has level 10, at 7 am level 9 and so on. In the end, at 10 am the tank level is equal to 2.
In the next day, the process must start again and the tank must start at level 6.
Any suggestions? Thanks in advance.
Solved!
Go to Solution.

While this may work it can be improved significantly. This really isn't a state machine. This is basically the same as your flat sequence with the exception of using a While loop with a Case statement to implement each frame.
You should define what your actions are and create a typedefed ENUM naming them. State names of 1 through 24 are meaningless. Not to mention in your code many of the cases are duplicates of others. That would mean that all of those can be one state with logic to determine what action/state comes next. A properly defined state machine would not need the outside For loop. Without knowing your specific needs some examples of reason state names would be the following: Start, Stop, Exit, Error, Initialize, Get Tank Level, Fill Tank, Drain Tank, Idle, etc. Can you see how these are easier to understand than 1 through 24.
There are lots of examples of state machines here. Try a search and take a look at some of them.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

Start and Stop a Windows Service From Java

Is there any way to start and stop a Windows service from Java? The only post I found on it (http://forum.java.sun.com/thread.jspa?threadID=647509) had a link to one of the many aps that allow Java programs to be services, which is not what I am interested in doing.
I am attempting to get data from performance counters from the Windows Performance Monitor into a Java ap without using JNI. I can get the data from C++ or a .net language pretty easily and was going to create a service that would listen for socket requests and feed back the data. However, I'd like to start and stop that service when my java code starts and stops. Is this possible? Would it make more sense to just use a .exe and Runtime.exec()?

If it's only to start or stop a service then you could use the net command without any need for JNI.import java.io.*;
public class MsWinSvc {
    static final String CMD_START = "cmd /c net start \"";
    static final String CMD_STOP = "cmd /c net stop \"";
    public static int startService(String serviceName) throws Exception {
        return execCmd(CMD_START + serviceName + "\"");
    public static int stopService(String serviceName) throws Exception {
        return execCmd(CMD_STOP + serviceName + "\"");
    static int execCmd(String cmdLine) throws Exception {
        Process process = Runtime.getRuntime().exec(cmdLine);
        StreamPumper outPumper = new StreamPumper(process.getInputStream(), System.out);
        StreamPumper errPumper = new StreamPumper(process.getErrorStream(), System.err);
        outPumper.start();
        errPumper.start();
        process.waitFor();
        outPumper.join();
        errPumper.join();
        return process.exitValue();
    static class StreamPumper extends Thread {
        private InputStream is;
        private PrintStream os;
        public StreamPumper(InputStream is, PrintStream os) {
            this.is = is;
            this.os = os;
        public void run() {
            try {
                BufferedReader br = new BufferedReader(new InputStreamReader(is));
                String line;
                while ((line = br.readLine()) != null)
                    os.println(line);
            catch (Exception e) {
                e.printStackTrace();
}Regards

Start and stop windows service for multiple remote computers

Hello,
Can someone show me how to Start and Stop windows service for multiple remote computers using Command Prompt or PowerShell or even Java?
Thank you

You asked a pure Windows related question at a pure Java related forum. We have advised you to look for a Windows related forum to post the question. Nothing special. It's like asking a car mechanican to help you with your migraine, he would advise you to look for a general practitioner.
But why are you so surprised and negative about this answer after all? Don't we have to help you? Don't you appreciate help? So be it then, but please stay away then if you keep this attitude.

How to start and stop sapmmc server when windows is started and shutdown

Hi,
May i know how i can make sure the sapmmc server for ECC 6.0 to start when the windows 2003 server is started. I know i need to add this as a service in the windows service manager but i dont know how to do that.
Please advise me on how to add a service to start the sapmmc server when windows is started and how to stop the sapmmc server automatically when windows is shutdown.

Hi Raja
checkout this document m sure it will help you in configuration
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/0512c790-0201-0010-72b7-886677ad7955
also check
/message/6511605#6511605 [original link is broken]
All the best ,,
Cheers
dEE

How to start and stop the BI Services in Solaris 10

Hello All,
Can anyone guide me on how to start and stop the BI Services in Solaris 10. In windows there are options set in Start->Programs->Middleware_Home->Start/Stop BI Services.
Primarily after doing changes to the scheduler configuration, I need to restart the services to get it implemented? If yes how can I do it?
Any help will be appreciated
Thank you
Ash
Edited by: 902739 on Jan 11, 2012 12:17 PM

Please help me by showing action plan for stop sap , offline backup and then start sap.
i am little bit confuse How to start and stop SAP on cluster for offline backup
Below are the systems name with host name , please explain me in sequence
Systems name                                   Hostname
# Hope SAP ERP Prod DB Primary       gsgbbux860
# Hope SAP ERP Prod DB Standby      gsgbbux861
# Hope SAP ERP Prod Cluster              gsgbbux862
# Hope SAP ERP App 1                       gsgbbux864
# Hope SAP ERP App 2                       gsgbbux865
Thanks in advance
Zaheer

Is there a way to Start and Stop OC4J through Services

Currently we are starting and stopping OC4J manually through the Dos command prompt on our servers. We are interested in making it a Services where we can start and stop OC4J thourgh the services option on the control panel in windows. Any suggestions would be greatly appriciated.
Thanks!
Chad

This has been discussed several times in this forum. One of the thread is
How can I set the export path in Form Builder 6i?
yes, you can use Windows Resource Kit or some third party freeware to do so.
regards
Debu

Windows script to start and stop jobserver only, with BOXI31

hi,
my question is easy but i have found nothing : on BOXI31
how to start and stop jobserver (adaptive...) automaticaly with windows script ?
in tasklist command, jobserver have no services name...
thank's

In XI R2 you can stop & start job servers by their types, but in XI 3.1 I don't think you can do that, b'cos it doesnt list by server type just shows jobserver for crystal, webi & deski.
Thanks,
Hari

Starting and Stopping Repository Mgr Service

Hello All,
I am running Forte 3.0.D.0 on Windows NT 4.0. At night, I run batch files to backup and clean the repository.
With previous versions of Forte (before 2.H) my scripts simply did an rpstop, rpcopy, rpclean and finally a rpstart to start the repository again. This worked great.
Now, however, I am running the Repository Manager as an NT service, so I can no longer run rpstop or rpstart (rpstart does not start the Repository Manager service).
One solution I have found is to use Net Stop and Net Start to stop and start the Repository Manager service, so my script looks something like this:
rpcopy...
net stop "Forte Repository Manager 3.0.D.0"
rpclean...
net start "Forte Repository Manager 3.0.D.0"
This seems to work fine most of the time, but occasionally the service won't stop or start (like when a workspace is open). My questions are:
1) Are there any other command line processes that people know of to start and stop a service?
2) What is Forte's recommended process for starting and stopping the Repository Manager service in a script?
Thanks for your help
John Bruning
IBIS Consulting Inc.
www.ibis-consulting.com

Your object could actually bind to a port using serverSocket.accecpt() and when a connection comes in, it exists.

Re: Starting and Stopping Repository Mgr Service

John,
Try this
Shutdown 0
from the Escript.
Herman Magno
Credit Lyonnais, NY
Hello All,
I am running Forte 3.0.D.0 on Windows NT 4.0. At night, I run batchfiles to backup and clean the repository.
>>
With previous versions of Forte (before 2.H) my scripts simply did anrpstop, rpcopy, rpclean and finally a rpstart to start the repository again.
This worked great.
>>
Now, however, I am running the Repository Manager as an NT service, soI can no longer run rpstop or rpstart (rpstart does not start the Repository
Manager service).
>>
One solution I have found is to use Net Stop and Net Start to stop andstart the Repository Manager service, so my script looks something like
this:
>>
rpcopy...
net stop "Forte Repository Manager 3.0.D.0"
rpclean...
net start "Forte Repository Manager 3.0.D.0"
This seems to work fine most of the time, but occasionally the servicewon't stop or start (like when a workspace is open). My questions are:
>>
1) Are there any other command line processes that people knowof to start and stop a service?
>>
2) What is Forte's recommended process for starting andstopping the Repository Manager service in a script?
>>
>>
Thanks for your help
John Bruning
IBIS Consulting Inc.
www.ibis-consulting.com

Your object could actually bind to a port using serverSocket.accecpt() and when a connection comes in, it exists.

VMM 2012: How to Configure Automatic Start and Stop Actions for a Virtual Machine?

Does somebody know how to confgure Automatic Start and Stop Actions for a Virtual Machine in VMM 2012?
I miss that option.

Automatic Start or Automatic Restart actions are available for virtual machines running on a Hyper-V cluster from within Virtual Machine Manager.
From within Virtual Machine Manager, bring up the Virtual Machine's properties:
Click "Hardware Configuration"
Click "Availability"
Click "High", "Medium", or "Low" to enable automatic start/restart or
Click "Do not restart automatically" to disable automatic start/restart
Screenshot from VMM 2012 for a VM running in a Server 2012 R2 Hyper-V cluster:
VMs running on a cluster have to be marked "Highly Available" and logically, Microsoft assumes that you'll want these VMs to be running all the time when this setting is selected. If the cluster fails or needs to be restarted, you can set the priority
by which a VM restarts, or you can set the VM to not restart at all when cluster services are restored by using the settings above.

Windows service start and stop automatically

Similar Messages

Maybe you are looking for