Windows Services not working, nmbd stopping

Hi all,
I encounter a strange problem.
I'm currently trying to install a Mac OS X Server System on a Xserve and XRaid. This to remove a Win2K Server with AD on and Exchange working on it.
I set my server in OD master, import accounts from the AD, replaced Exchange with Kerio etc ...
But when i try to use Windows services, smbd always working fine (file sharing is ok), nmbd stopping. So i can't use it as a PDC server because the domain i create disappears with the crash of the nmbd process. In fact nmbd seems to stop after nmblookup requests.
I've to say that the Win2K server is not stopped.
I installed lots of OS X Server as Windows PDC and it has always been working fine.
I also tried to activate Windows Service as "linked to Active Directory" and as "Standalone Server" and it resulted the same issue.
Does anyone had an idea ? I thought that it could be a problem with the Win2K requests and crashing my nmbd with nmblookup.

I'll try these things tomorrow to see what happens :
- Change the "os level" setting to something high in /etc/smb.conf . (because of the Win2K Server).I'll set this to 255.
1. Make sure that DNS is running on your server. Make sure that the server has a dns entry for itself.
2. Ideally "Workgroup Master Browser" and "Domain Master Browser" should both be enabled. An aside, this did not interfere with my seperate AD domain on the same network.
3. Enable WINS on your server.
4. Configure WINS on Windows clients to point to server.

Similar Messages

OBIEE 11.1.1.5 AdminServer as Windows Service not working

Hi, I've read several discussions on this topic, but have yet to find a suitable answer.
I've installed OBIEE (Simple Install) and can successfully use Start BI Services from Start > Oracle Business Intelligence > Start BI Services
I've been trying to set this up as a Windows Service (ala [url http://blogs.oracle.com/pa/entry/obiee_11_1_1_how3]this Oracle blog and [url http://blog.guident.com/2012/02/auto-starting-obiee-11g-services-as.html]Guidents blog posting, but have been unsuccessful.
I'm not exactly sure what information is helpful for this, so I'm adding links to my log files. I do want to draw your attention to the AdminServer log files. When run as a Windows Service, the last activity logged is: +<Creating WorkManager "ESSRAWM" for module "null" and application "ESSAPP">+.
Log Files: Running as a Windows Service
<li>[url https://docs.google.com/document/pub?id=1frpTKaeWZ8zhj1-ET3E5mrPByMfv_5xIVIzDhjVUr54]AdminServer.txt
<li>[url https://docs.google.com/document/pub?id=1yaiNaka-EEMmr5SBy2_4Eg1sW3oWnpcgjANa_cQjt-U]AdminServer-stdout.txt
<li>[url https://docs.google.com/document/pub?id=1bUKg5IttugIVelYqc4tuqt413ECaFxSHyLThewKjffg]AdminServer-diagnostic.txt
<li>[url https://docs.google.com/document/pub?id=1bxCXX_Py6HqMjR9nO69fOVi2Ug6YQWrN3duHqn44Lb0]WinService.out
Log Files: Running using Start BI Services
<li>[url https://docs.google.com/document/pub?id=1UcCkzeWWu_npB2mlUZZ8D_ISASwt_HT0H8K6STrIFtc]AdminServer.txt
<li>[url https://docs.google.com/document/pub?id=1VKEFh27P74odJRL53cqXn3pdiYOkoyfeQ8UgumnGlX4]CommandOutput.txt
<li>[url https://docs.google.com/document/pub?id=1Vjzpk8V9LP0BlLKKd3jv-MnfhrtK-deYR6OWtD0zzoI]bifoundation_domain.txt
<li>[url https://docs.google.com/document/pub?id=1I9Xr1R2M1mIYj4KSR4HYgNqFQcojRIHrd-_NKnniXKU]AdminServer-diagnostics.txt
Basic System Info_
OS: Windows Server 2008 R2 Standard SP1
System: 8 GB RAM, 64-bit
OBIEE: 11.1.1.5
WLS: 10.3.5.0
Thank you for any insight you can offer!
Brian

Thank you for the quick reply!
When I try to start the Windows Service manually, the status box "Windows is attempting to start the following service on Local Computer..." appears and remains for 2 minutes (based on my "-delay:120000" setting I presume?). It then closes and the windows service shows a status of "Started." (that's shown in the [url https://docs.google.com/document/pub?id=1yaiNaka-EEMmr5SBy2_4Eg1sW3oWnpcgjANa_cQjt-U]AdminServer-stdout.txt log: at 11:43:30 we see +[RunJavaApp] Invoking main class+, then at 11:45:30 (2 minutes later) we see +[ServiceStart] Reporting SCM of SERVICE_RUNNING.+
I let it sit in a "Started" state for 30 minutes and there is no additional logging activity. Incidentally, when I check the Windows Task Manager, it shows the beasvc.exe process consuming a constant 50% of the CPU with Memory fixed at 328,356 K.
Correct on all assumptions. Simple Install, Weblogic Version 10.3.5.0, Sun JDK 64 bit (version 6) - I'm using exactly what was included with the OBIEE install.

Adobe Bridge CS5 in windows 7 not working?

Adobe Bridge CS5 in windows 7 not working. I was using bridge perfectly for last 2 years. It stops working since 3 days. I tried to install updates. Showing some error to install.
Tried to install creative cloud..again some error. Error code : 82
Could you please advice how I can fix my adobe bridge.

https://www.youtube.com/watch?v=xDYpTOoV81Q&feature=youtu.be
please check this video I uploaded..this is what happens when I click adobe bridge.. just blinks and go off. bridge not working on task manager

Lion Server DNS service not working for locally created zones. Caching working fine.

OS Lion Server DNS service not working for local zones. Was fine under Snow leopard server but Lion server upgrade has severely broken my DNS and web sites. Zones look fine under Server Admin but keep getting "query failed (SERVFAIL) for xxxx at /SourceCache/bind9/bind9-42/bind9/bin/named/query.c:3921" in the logs. BTW - Server Admin cant seem to see the log file either.
Surely someone actually tested that DNS still worked on Lion?

I upgraded from Snow Leopard Server to Lion Server on day 01. I hit the same issue where, after the upgrade, my Lion Server stopped serving names for my private local domain.
I finally took a few minutes to figure out what was wrong. After turning on debug logging and looking through the logs, I found my particular issue, now resolved.
The issue I had was, when the domain initially was setup when I installed Snow Leopard Server, for some reason it created a zone just for the server (in my case, something like zone "s-01.mydomain.priv"), and a separate zone for all the other machines (zone "mydomain.priv", containing all the private IPs for my local domain). I never messed with it because it worked, but generally I would have put all of them in the same zone.
My zone "mydomain.priv" had a nameserver and mail exchanger entry for my server, s-01.mydomain.priv. I could see this in the Server Admin app on the DNS bubble, Zones tab, mydomain.priv selected, and the General Info panel. This was fine in Snow Leopard. This was failing the zone load in the updated bind for Lion Server, though. The issue was that the "mydomain.priv" zone was referencing the s-01.mydomain.priv server, which was not defined in the "mydomain.priv" zone but rather in the "s-01.mydomain.priv" zone.
My fix:
1. In Server Admin, add the server to the zone "mydomain.priv". I put an A record (Add Machine) in the "mydomain.priv" zone for my server named s-01.mydomain.priv.
2. shut down DNS on the OS X Lion Server (hit the Stop DNS button on Server Admin).
3. edit /etc/named.conf by hand, removing the specialized zones that contianed just the server. In this case, it would be the section titled 'zone "s-01.mydomain.priv"' and the section titled 'zone "3.10.1.10.in-addr.arpa"'. Your in-addr.arpa zone name will change based on whatever your server IP address was. My internal one happened to have s-01.mydomain.priv mapped to 10.1.10.3.
4. Once the specialized zones for just the server were removed, I started the DNS up again. Instead of serving four zones as it had in OS X Snow Leopard Server, it now servers two zones. And, now, it is resolving my local machines for the mydomain.priv zone.
YMMV. I did note that it wasn't totally necessary to do step 3, but I never really understood the need for the specialized domain, and keeping it around would have a copy of data that would just confuse things.
Hope that helps. That's been the only hiccup I've noticed updating to OS X Lion Server thus far.

Same issue Network Discovery not working and Windows Update not working

I've read the threads.
This is a Vista Ultimate upgrade. My OOOOH My I have clocked 8 hours
Everything was working before. I tried all of the recommended services turning on restarting.
Also, ran into the problem of my memory being eaten. Suspected cause hibernate mode, which I had to disable. Scott Hasselman blog recommended the fix which is a cheap work around that limits machines functionality!!
I'm and IT Engineer specializing in MS product lines since Windows 1.0. MFC foundation classes etc.. What is the real problem ?
I don't have the NetBIOS over tcp/ip in my services?
I figure that the cost of my time and other individuals pays for the OS four times over. Give me a Microsoft developer subscription or something to make me happy. This is my development machine and I'm loosing time and money.
FYI, Just upgraded my second machine to Windows 8.1 OMG !!2 Hours to upgrade after the download. I loose my configuration settings. I required to have a Windows Live whatever account!!! This is not the way to compete and keep customers.
Windows XP has been by far the best deployment experience. I need a Knowledge base that gives solutions , not a troubleshooting scenario that does or does not work!!
Please , don't tell me to go and by a OEM Surface I cannot recommend this to my clients.
Thank You

Hi,
If it worked previously, a quick solution is to run System Restore and get back to the previous status when the issue didn’t occur.
What is System Restore?
http://windows.microsoft.com/en-us/windows7/What-is-System-Restore
When you turn on network discovery, do you get any error prompt?
Please check if you have any error message about network discovery in event viewer.
Open Event Viewer
http://windows.microsoft.com/en-US/windows7/Open-Event-Viewer
What information appears in event logs (Event Viewer)?
http://windows.microsoft.com/en-US/windows7/What-information-appears-in-event-logs-Event-Viewer
Please use Windows Live SkyDrive (http://www.skydrive.live.com/) to upload the Error logs to a public folder and share the URLs with us.
Also, please temporarily turn off your firewall and all the security programs for a test.
As far as I know, Network discovery requires that the DNS Client, DNS Client, Network Connections, Network Location Awareness, Remote Procedure Call (RPC), Function Discovery
Resource Publication, TCP/IP Netbios helper, SSDP Discovery, and UPnP Device Host services are started and set to automatic.
You should check again if you have started all these services.
Regarding the update issue, I suggest you try the following suggestions.
1. Temporarily disable firewall and antivirus program to test the issue.
2. Open the Windows Update troubleshooter
http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter
3. Reset Windows Update components
http://support.microsoft.com/kb/971058
You may follow the steps from the link below to fix the issue.
Windows Update Not Working.
http://support.microsoft.com/kb/555989
You may also see the common Windows Updates troubleshooting guide.
Fix Microsoft Windows Update Issues
http://support.microsoft.com/kb/906602
Hope it helps.
Regards,
Blair Deng
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

TA44551 My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work.

My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work. I tried to restore it again and charged it in three different locations with different cables. etc but nothing. Suggestions?

- After charging for 1/2 hour or so, does iTunes see the iPod? If yes, restore the iPod from backup.
- If no, se if placing the iPod in recovery mode will make it visible so you can restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore

Why the buttons created by Acrobat XI in window do not work in android mobile or ipod touch?

Why the buttons created by Acrobat XI in window do not work in android mobile or ipod touch?

Hi,
Could you please send us a test file which has those form buttons? Please email that file to us at DL-adobereader-android <[email protected]>
Thanks,
- Reader Mobile team

Popups: Navigation from view to window does not work

Hi,
I open a second window as popup. This window has 2 views embedded, displaying view1 first. On some actions I would like to navigate to view2.
Defining an outbound plug on view1 and an inbound plug on view2, connecting them and firing the outbound withith the onaction works absolutely fine.
However, for some reasons I would like to avoid a direct navigation, but would like to navigate from view1 to the popupo window and from there to view2 (or maybe another view, ofcourse also embedded in the same popup window). Unfortunately I fail on this scenario - I can fire the view-to-window plug, but the destination on the window side (handle in method) is never reached.
Since the same concept works fine on non-popup windows I wonder whether a navigation from view to embedded window does not work for popups?
Any idea?

Hi Yashpal,
no, just one window.
The first link is view1 -> window, the second window -> view2.
I.e., I fire in the view the outbound plug, which is connected with its window.
In the window I fire an outbound plug, which is connected to view2.
In theory this should work - for non-popup windows I do not have any problem at all, however, for popup windows the navigation from view1 to the window is not processed.
In the meantime I played a little bit further: Instead of firing a navigation from view1, I now fire an event defined in the component contoller, on which an event method is registered within the window. Doing so, I reach the window, which I didn't reach via the navigation link. Once in the window, firing to view2 works just fine ...
Hope the issue is a bit clearer now. Also I found a solution, I am surprised that the simpler way via navigation does not work.

"no serializer is registered..." error with a web service not working

I'm using JDeveloper 10.1.3
EJB 3.0
I'm having issues with the web service not working after I create a client for it. The web service works fine up until I generate the proxy on the other side.
ERROR An error occurred for port: {http://buslogic/}MyWebService1SoapHttpPort: no serializer is registered for (class buslogic.runtime.....
I saved the file before I added the proxy and the wsdl looks the same between the working one and the non working one. I can not pin point the when the change to the web service is occuring. It seemed to work once all the way up until I had a ADF page trying to retrieve data, another time it failed when the proxy was created.
I can get the version that I saved to work immediately after the version that does not fails.
Any help would be greatly appreciated,
Dan

I'm using JDeveloper 10.1.3
EJB 3.0
I'm having issues with the web service not working after I create a client for it. The web service works fine up until I generate the proxy on the other side.
ERROR An error occurred for port: {http://buslogic/}MyWebService1SoapHttpPort: no serializer is registered for (class buslogic.runtime.....
I saved the file before I added the proxy and the wsdl looks the same between the working one and the non working one. I can not pin point the when the change to the web service is occuring. It seemed to work once all the way up until I had a ADF page trying to retrieve data, another time it failed when the proxy was created.
I can get the version that I saved to work immediately after the version that does not fails.
Any help would be greatly appreciated,
Dan

ITunes drag to import new songs in library or to create playlists from folders on windows does not work!

iTunes drag to import new songs in library or to create playlists from folders on windows does not work!
WHY? I have to solve, how can I do? Thank you

up

[svn] 4226: Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working.

Revision: 4226 Author: [email protected] Date: 2008-12-03 15:25:17 -0800 (Wed, 03 Dec 2008) Log Message: ----------- Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working. QA: Yes Doc: No Checkintests Pass: Yes Details: * Make sure the <reliable/> option is treated as a nested element rather than an attribute of its parent <network> element. Ticket Links: ------------ http://bugs.adobe.com/jira/browse/LCDS-517 Modified Paths: -------------- blazeds/trunk/modules/core/src/flex/messaging/Destination.java

Revision: 4226 Author: [email protected] Date: 2008-12-03 15:25:17 -0800 (Wed, 03 Dec 2008) Log Message: ----------- Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working. QA: Yes Doc: No Checkintests Pass: Yes Details: * Make sure the <reliable/> option is treated as a nested element rather than an attribute of its parent <network> element. Ticket Links: ------------ http://bugs.adobe.com/jira/browse/LCDS-517 Modified Paths: -------------- blazeds/trunk/modules/core/src/flex/messaging/Destination.java

[svn] 4195: Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working.

Revision: 4195
Author: [email protected]
Date: 2008-11-26 13:08:23 -0800 (Wed, 26 Nov 2008)
Log Message:
Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working.
QA: Yes
Doc: No
Checkintests Pass: Yes
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-517
Modified Paths:
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/config/ServerConfig.as

Revision: 4195
Author: [email protected]
Date: 2008-11-26 13:08:23 -0800 (Wed, 26 Nov 2008)
Log Message:
Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working.
QA: Yes
Doc: No
Checkintests Pass: Yes
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-517
Modified Paths:
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/config/ServerConfig.as

[svn] 4193: Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working.

Revision: 4193
Author: [email protected]
Date: 2008-11-26 11:40:05 -0800 (Wed, 26 Nov 2008)
Log Message:
Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working.
QA: Yes
Doc: No
Checkintests Pass: Yes
Details:
* Foundational update to include destination config in what we collect for runtime config exchange with new clients for destinations with network/reliable=true (LCDS only).
* Also typo in comment in AbstractConnectionAwareSession fixed.
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-517
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/AbstractConnectionAwareSession.java
blazeds/trunk/modules/core/src/flex/messaging/Destination.java
blazeds/trunk/modules/core/src/flex/messaging/services/AbstractService.java

Revision: 4193
Author: [email protected]
Date: 2008-11-26 11:40:05 -0800 (Wed, 26 Nov 2008)
Log Message:
Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working.
QA: Yes
Doc: No
Checkintests Pass: Yes
Details:
* Foundational update to include destination config in what we collect for runtime config exchange with new clients for destinations with network/reliable=true (LCDS only).
* Also typo in comment in AbstractConnectionAwareSession fixed.
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-517
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/AbstractConnectionAwareSession.java
blazeds/trunk/modules/core/src/flex/messaging/Destination.java
blazeds/trunk/modules/core/src/flex/messaging/services/AbstractService.java

Windows updates not working because it extract patches on Mac partition first., Windows updates not working because it extract patches on Mac partition first.

I have installed BootCamp 5.1 and Windows updates not working because it extract files on Mac partition before installation. Is there any workaround for same ?

To replicate this issue - Try to download .net framework 4.5 from microsoft website and than run that setup on windows partition.
Before installation. it will first extract all the binaries to a other drivers, since in my case other primary drive is E which is a Mac partition so it always give me an error while extractiing and therefore setup is not able to execute propely.
Let me try to get the screen shot of error and send it here.

I experience issue with my Verizon iPhone5s cellular service not working on 3G.

I'm experiencing issue with my Verizon iPhone5s cellular service not working on 3G but LTE works great. I tried resetting network setting, new SIM card, reset iPhone to new too. I'm have the latest carrier code of 16.0. Iphone firmware 7.1.2.
I started experiencing this when verizon started advertising XLTE.
It is very frustrating when internet does not work when I'm in 3G area. Phone calls does work though. Signal is good too.
Thank you in advance.

I would agree w you but this only happens on Iphone5S.
Iphone5 works fine. I tested this with other Iphone 5 and 5s.
To test this, go to setting/celluar/turn off "Enable LTE"

Windows Services not working, nmbd stopping

Similar Messages

Maybe you are looking for