Windows setup hangs after BIOS update

Hey all,
after Bosskiller walked me through setting up my boot sequence I've decided to reinstall windows on my machine.
I get into the Windows Setup blue screen just fine - but somewhere in the middle of the loading sequence it arbitrarily hangs on me.
I've tried multiple times and it seems to get farther each time, but now it will not get any farther than "video card".
Any advice will be greatly appreciated!
mainboard: MSI p965 Neo
OS: Windows media center
Cheers,
Jeremy

read Moan Guide 1st and provide full system specification including PSU details(they can be found over PSU sticker)

Similar Messages

K8N Neo4 hangs after bios update

Here is my situation:
Onboard ethernet seemed to die last night so I plugged in a usb wifi adpater - worked fine. Ran Live Update and updated the bios in windows (Not sure the version) and it seemed to install ok but hung at the "Restarting Windows" screen.
After a manual restart, it seems to start going through the motions but then gets to something like "NTLoader not available" and gives the option to restart.
I can get into the bios setup and all of my drives master/slaves appear to be there and I know it can see the floppy drive as I stuck one in and got the "Non system disk" message.
Would creating an ms-dos install disk and a disk with the latest K8N Neo4 bios be my next setp?
Thx!
WH

if you're still having problems, try unhooking the sata's/ide's for all the drives except c: or whatever has the os. let it boot once, then rehook em up.
i just updated to the 1.50 bios on a neo4-f and it was trying to boot windows off the secondary ide drive even tho it's 2nd in order.

After bios update, my window media player got hang and headphone clarity is not proper

HP Pavilion g6 after bios update, my window media player got hang and headphone clarity is not proper

Hello mathewstays,
Which model of g6 do you have? Which operating system? I'll be able to better assist when I know this information.
Thanks,
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

I can't activate windows 8.1 pre-installed on my Toshiba E45-B4200 after BIOS Update

I bought Toshiba laptop Model E45-B4200, at first time I could activate windows 8.1 like a charm.
Few months later Windows 8.1 has crashed, so I did clean install of pre-installed windows, no problem so far. Toshiba Application installer app has downloaded BIOS update, so I ran it.
I tried to activate windows after BIOS update, but it didn`t work. No error message, but Change PC settings window just got minimized every time that I tried to click on Activate Windows option. I thought that I did some mistake, so I repeated windows reinstallation, and same problem occurred again.
Now I can`t update Windows, Office 2013, and so on.
I`ve tried SLUI 4 command to force activation by phone, but it didn`t work as well.
I read on MS blogs that windows 8.1 stores product key on MSDM table, windows should be activated normally. Now I got no options now, can you help me?

It shouldn't need to be activated it. Everything should be automatic. Because it's asking you, that's already indicative of a problem. You might want to call customer support.
- Peter

Problem in booting after bios update

Originally, it was windows home basic was installed in my laptop. But recently I had installed Windows professional. After installation I have downloaded all drivers which are compatible for my laptop model. After BIOS update installation my pc is not booting up at all. Only power button, WiFi and capslock is lighting. Capslock is continuosly blicking. Even FAN speed gets lowered. I have tried hard reset as well as windows+B comand during startup still condition is same. Please reply me....

see help 8....
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

After BIOS update DVD driver do not read DVDs anymore - Sat A80

Hi,
I have a Satellite A80-131 and after bios update (last version 2.5) by windows procedure update, my DVD drive do not read DVD medias anymore. It is possible to read CD medias, but not DVD one.
Can I reinstall the old bios? Can I reinstall the firmware?
Thanks
Ronai Lisboa

Hi Ronai
Like Jimi has said in the posting above. It's very unusual that after BIOS updating the DVD drive hasn't read the DVDs.
Furthermore it's not advisable to use any 3rd party applications to DOWNGRADE the BIOS. Usually only the ASP can downgrade the BIOS. Such procedures are very serious and the wrong procedure can damage the motherboard.
However, it's nice that you have solved the problem and that the drive works properly.
Thanks for the feedback.

Satellite Pro L300: BSOD after BIOS update

Hi
after update the Bios of Satellite Pro L300, the windows not start!
Its show the blue dead screen!
What can i do?

Hi
Are you able to access the BIOS settings?
Im not quite sure why this BSOD appears but possibly the SATA mode settings have been changed after BIOS update
Usually the SATA mode should be set to AHCI if the SATA drivers are installed.
But if the SATA drivers are not included the SATA mode should be set to compatible.
Please check this!
Furthermore you could set the BIOS to the default settings and could try to boot the machine again.

Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update

Hi.
Yesterday I did a BIOS update on my Satellite A100-590 PSAA9E-03Z00QGR with the appropriate flash:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=153&selProduct=624&langua ge=17&selOS=10&selType=all&yearupload=&monthupload =&dayupload=&useDate=null&mode=userMachines&search =&action=search&macId=&country=all&selectedLanguag e=17&type=all&page=1&ID=58477&OSID=-1&driverLanguage=42
bios-20070709111839.zip
After the flashing procedure the machine rebooted automatically, but unfortunately it now keeps hanging at the Thoshiba welcome screen. Also pressing F2 or F12 won't change anything. It seems like the BIOS is corrupt.
I saw, that in the BIOS package are delivered two flash files (s10gm590.rom and s10pm590.rom). But just executing the SanAntonion10 BIOS590MP.exe a .vbs script is started that decides automatically chooses and loads a flash file. Maybe it chose the wrong one?
What shall I do now? Is there a way to restore the BIOS, or do I have to send my notebook in?
Thanks in advance
MAT

> Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update
What to say Marc. It looks like you have used a wrong BIOS version or you have updated the BIOS in wrong way.
You could try to access the BIOS and try to set the settings to default.
Dont forget to save the settings if you will exit the BIOS.
But if this procedure does not help, you will have to contact the ASP in your country.
Possibly the guys will try to flash the BIOS again with other special version.
Good luck
Greetings

HP p6230a runs slow after bios update - Getting error BIODHD-8 on Diagnostic Tools

After bios update my desktop runs so painfully slow it is unworkable. Disk drive seems to be constantly hammered by processes that don't appear on task manager. Running 64 bit windows 7 (sp1). Running the diagnostic tools prior to boot up comes up with error code BIOHD-8 - A SMART test failed on the drive - please contact HP Support. Ideally would like to get previous version of bios as machine was running well before update.

I will ask my HP Employee Expert colleagues about this internally. It will take a while for them to respond.
the BIODHD-8 error code means your harddrive is failing and must be replaced.
Back up everything that you possibly can before it fails and no longer boots up into Windows .
is your notebook still within the standard warranty period of one year? A notebook hard disk is a warranty replaceable item.(no cost to you while within warranty)
HP notebook warranty status check website
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

After bios update side nomberpad is not workinh keys from 0-9

after bios update side nomberpad is not workinh keys from 0-9

Hello jay04,
Welcome to the HP Forums!
I understand the number keys do not work on your keyboard. I will do my best to assist you. First, I require the following information:
1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your product number
2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
3. Does this occur on certain programs, or all programs?
4. Have you installed any new software or drivers on this computer, before the issue appeared?
Additionally, if the issue just began occurring, I would perform a system restore. I want you to bring the computer back to the earliest restore point possible, in an attempt to dodge whatever caused the issue. Here is a document on how to perform a System Restore: System Restore
Thanks!
Mario
I worked on behalf of HP.

H97M-G43 RAID0 Config Lost After Bios Update

All bios is buged lost RAID0 config after bios update(no know for other RAID modes)
Firmware Versions with problem:
2.3
2.4
2.5
2.6
for 2.0/2.1/2.2 Bios versions no know if have this problem.
the problem is serious because in each update you lose RAID Config. I hope to fix it quickly

Of course you lose volumes if you change to AHCI, reboot and back to RAID at least when you have Windows 8/8.1. So now I am slightly confused where the problem is..
And since we gain experience through time, yes you lose RAID when updating BIOS as it automatically gets back to AHCI (default modes). So if you ever want to update BIOS, best is to disconnect HDDs, update BIOS and reconnect them before entering BIOS.

I understand that your iPhone 5 is not recognized by iTunes 11.2 on Windows 8 pc after you updated your device iOS to iOS 7.1.1.

iPhone 5 is not recognized by iTunes 11.2 on Windows 8 pc after you updated your device iOS to iOS 7.1.1.

Hi calltimecasting,
Welcome to the Apple Support Communities! If your iPhone is not recognized by iTunes on Windows 8, I suggest the steps in the following article to get this resolved.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
I hope this helps,
-Joe

After BIOS update Satellite L350-172 doesn't start anymore

Satellite L350-172 Bios-Update from bios-20090203164614 to bios-201002250
I just updatet the BIOS of my notebook from 1.60 to 2,20. Now the Notebook doesn't start any longer.
"It was stopped for reason not to damage the Computer" - blue schreen.
How can I downgrade the bios again? Or - what have I to change in the bios-settings?

Hi schuwe,
Im a little bit confused about your posting. How do you tell your BIOS not to restart?
Anyway, after BIOS update you should load the default settings in BIOS.
Did you choose the right BIOS especially for your model?

Hi . plz help me. after bios update. i could work till I shutdown

After bios update I could work till I shutdown my laptop g510 . Now when I press power button. White light near camera shows but again it goes off. Plzzzzz help me
I also pressed one recovery. Then pressed f2 and f9 f12 nothing working.

take it to point of purchase with proof of purchase if you can't find a Nokia care point near you
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

My iphone stopped synching with my windows 8 machine after an update. How do I fix?

My iphone stopped synching with my windows 8 machine after an update. How do I fix?

Restart your device by holding the home and power button until the Apple logo appears. You will not lose any data.

Windows setup hangs after BIOS update

Similar Messages

Maybe you are looking for