Windows Seven XP Mode Troubleshooting

Hello,
On R500 (Seven Pro 64 bits Ram 4 Go), I try to use the Windows XP mode.  But the XP virtual machine is unusable because it's very very slow.
For example when I launch ONLY the Task Manager, the CPU is between 20 and 100 % used !
With the Command line, the caracters entered manually are displayed  with a dealy !!!
Thanks for any idea.
Solved!
Go to Solution.

I do not use XP mode. (as of the many issues it has) I use VMware it runs fast if you give XP 1g of ram to use. Being that you have 4g you should be able to give it 2g's I would think. You will however need a XP disk to install it in VMware.
IT Specialist and Consultant
Lenovo Tablet Evangelist
Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
Deutsche Community   Comunidad en Español
Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

Similar Messages

  • Firefox 22.0 ONLY connects to Internet in Windows 7 'Safe Mode' (IE does connect)

    FireFox 22.0 only works in Windows 7 'Safe Mode'. Any other program on computer that needs the Internet connects fine; i.e. the Internet connection is good.
    Have not recently installed an update, nor 'Add-On'; this is PURELY a FireFox problem. The problem started "suddenly".. no new installs of programs etc.
    Actions:
    - Deleted Firefox; Re-Installed it → Same result, FF does not connect
    - Reset Computer to earlier time/date → Same result.
    - Created new FireFox Profile; signed in with new profile → Same result.
    - Renamed 'Firefox.exe' to 'Firefox1.exe' → Same Result
    - Run 'Norton Antivirus' scan → no problems found; Same result
    - Deleted "Norton AntiVirus' → Same result.
    - Run latest updated 'Malwarebytes Anti-Malware' scan → no problems found; Same result
    - Deleted 'Anti-Malware' → Same result.
    - Cleaned Registry of any 'Mozilla' and 'FireFox' reference → Same result
    → Checked in 'Safe Mode' 'Task Manager - Processes' ... few files there.
    → Checked in 'Normal Mode' 'Task Manager - Processes'.. a lot of files there...
    > In 'Normal Mode' deleted 'Processes' files to bare minimum, testing FireFox after each deletion → Same Result.
    Note:
    In Windows 7 'Safe Mode', there are two files which are NOT shown in 'Normal Mode' in
    'Task Manager - Processes';
    - ctfmon.exe &
    - dllhost.exe.
    Can't find info on them if they're needed by FireFox or not to connect to the Internet.
    > In 'Safe Mode': they are present, and FF connects.
    > In 'Normal Mode': they're not present, FF does NOT connect.
    Could still be coincidence.
    As for the "Troubleshooting Information" that's associated with the Question page for posting this question ("..This information gives details about the internal workings of your browser that will help in answering your question...."):
    "...A window will (NOT) open in the top corner..."...
    Because it ONLY works in FireFox webbrowser.. and guess what?...
    My Mozilla FireFox Web Browser can NOT connect to the Internet... (See Top of this Question Page).
    And guess what happens when I click on "...Try these manual steps..." to provide troubleshooting information?!?!?!?
    Another "..Fill in the details of your question.." page opens up...
    Anybody any thoughts? Pascal Finette? Jamie Zawinski? Dave Hyatt? Joe Hewitt? Blake Ross?
    Maybe anybody else from the Netscape Navigator days still around??!?! ;-)

    Had deleted '''HideMyIP-P''' from computer recently, and didn't have problems untill I re-started computer... Which, come to think of it now, wasn't until a few days after deleting ''''HMIP-P''''... (computer is 'on' 24/7).
    Then, on start-up, it wouldn't allow FireFox to connect to the Internet.
    After reading through the website you recommneded, which mentiond ''HideMyIP-P'', I re-Installed ''HMIP-P'', then turned the "hiding" 'off' and was allowed(!) with FireFox to connect again.

  • My Firefox version is 13.0.1, I use Windows Seven 64-bit, when I click on Firefox, but the program does not run! But Firefox is seen in the list of Windows proc

    My Firefox version is 13.0.1, I use Windows Seven 64-bit, when I click on Firefox, but the program does not run! But Firefox is seen in the list of Windows processes, while Firefox does not run.
    I manually deleted Firefox from the list once I have Windows processing.
    And when I clicked on Firefox, Firefox will open quickly and easily.
    Firefox process in Windows Processes names list called "firefox.exe * 32" is.
    Please try to solve my problem, my problem is how to solve?

    Hi, are you saying that you start Firefox and it stalls -- you can see it in the Task Manager but it never displays -- but if you kill that process and start Firefox again it starts up properly that second time?
    If you look at the statistics available in the Task Manager's processes tab such as bytes read or other bytes, can you see whether Firefox is doing anything at all? ''Note: You might need to add columns if your Processes tab isn't set up to display statistics. You can do that from the View menu.''
    You might already have seen these troubleshooting articles. If not, does anything here help:
    * [[Firefox won't start - find solutions]]
    * [[Firefox hangs or is not responding - How to fix]]

  • ReadyComm 4.0 for Windows Seven?

    Hi there,
    When trying to install ReadyComm software 4.0 under my Y530 and Windows Seven x64 French Professional, it fails when using or not compatibility mode.
    Is there a newer version or might wait the official launch of Seven to have final softwares?
    Best.
    French IT
    Y530 / Win 7 x64 Final
    Solved!
    Go to Solution.

    Dear 6thSense,
    Thanks for your answer,which is good for me.
    My computer was delivered with a Vista version and Readycomm installed...... that is the goal of my question.
    But as Windows 7 still do  good job for wifi and network management, isn't it quite similar to the Vista one?
    thx
    French IT
    Y530 / Win 7 x64 Final

  • Graver un cd acheté sur I'tunes avec mon Pc HP sous Windows seven?

    Comment graver avec un Pc HP sous windows seven de la musique achetée sur I'Tunes avec un I'Pad? Réponse en français svp.... Merci

    Hi
    >>shutdown the computer and get into the Diagnostic screen 
    >> pressing the F2 function key when starting
    >>go to the touch screen test - if all the boxes pass the test issue resolved
    >>beofre going to that pease update the HP Support assistance and udate it
    >>so that u ill get the option to do a touch screen test
    >>issue ill be resolved:smileyhappy
    Troubleshooting touch screen issues in Windows 8
    Please click "Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the bottom right to say "Thanks" for helping!
    I am an HP employee

  • Problem with Siebel Image Creator in Windows Seven OS

    Hi! i try to generate the siebel install image with the Image Creator for Windows OS. The version of Siebel that i download of edelivery is 8.1.1.5 for windows OS (32 bits).
    I have in my computer, windows seven OS (32 bits), but the Image Creator don't work well... I can't create the Siebel Install Image...
    Any ideas?
    Thanks,
    Regards

    Have you tried to run the Image Creator in XP mode and with Administrator rights?
    http://www.howtogeek.com/howto/windows-vista/using-windows-vista-compatibility-mode/
    Otherwise you can try to run it in console mode:
    http://siebel-essentials.blogspot.com/2011/01/siebel-image-creator-in-console-mode.html

  • HT202213 can I home share a windows 8  computer with a windows seven computer

    Can I home share a windows 8 computer with a windows seven computer

    Those were correct. The troubleshooter says the network location needs to be set to home but when the connection  is identified as private and cannot be changed. The windows seven computer is not identifying a homegroup name but the windows eight computer is. Both computers say to join now under home sharing but it is never showing up.

  • Is there a way to make itunes autostart with windows in mini mode

    Is there a way to make itunes autostart with windows in mini mode i.e the taskbar player mode where it is most less obstrusive . itune takes a lot of time to start under windows

    Just delete the same songs from your library in iTunes.  Select the first song, hold the shift key, select the last song (which will select everything in between) and press delete.

  • HT4437 I have windows seven on my computer and use Safari 5 as my browser.  I also have the latest version of apple tv...is there a way to have videos from my browsing go to apple tv?

    I have windows seven on my computer and use Safari 5 as my browser.  I also have the latest version of apple tv...is there a way to have videos from my browsing go to apple tv?

    Airparrot is your only option in my opinion. I have not tried it myself yet but here is a link to their website. They offer a trial so check it out.
    http://airparrot.com/

  • Since I upgraded Windows Vista to Windows 7 iTunes only works in Windows 7 "Safe Mode".

    Since I upgraded Windows Vista to Windows 7 iTunes only works in Windows 7 "Safe Mode". it will not run in the normal mode. (It ran properly in Vista)  I spent several hours with the Microsoft Technician going through the "1717 suggestions, but to no avail.  On my own, I tried iTunes in Windows 7 "Safe Mode" and was successful!  It ran like a charm.  Unfortunately, I can't run iTunes properly in "Safe Mode"  I have not tried moving one set of the files yet.  But if iTunes works in Safe Mode, do I need to relocate anything or do I need to find what is causing the conflict between Windows 7 and iTunes?

    Which Satellite A205?
    Which Windows 7 (64-bit)? What about the other laptop?
    Which printer model, version, and so forth?
    -Jerry

  • Installing Firefox with windows 7 64bit mode just does not work.

    I have windows 7 64bit mode. I cannot install firefox, it crashes all the time when I open it. I know the problem is because my windows 7 is in 64bit mode. Can you (firefox support) or someone on this forum provide the simple and easy steps of getting it to work. Also can you (firefox) hurry up and release a 64bit version. I'm using google chrome and crazy browser as they seem to have no problems at all. I really want to use firefox but it just won't set up for me because I'm running win7 64bit mode. If I was running win7 32bit mode I wouldn't be having any issues. Has anyone out there got a simple step by step solution for this? It it mind boggling that with todays technology no one has a simple fix for this issue. Help!!!!!
    == User Agent ==
    Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.70 Safari/533.4

    I have been running Win 7 64 bit on an HP Pavilion lap for several months. The whole browser thing has been a nightmare. My work involves heavy duty internet research. Firefox crashes every few minutes. There is no specific event I can find that kicks this off, but running the latest Flash Players and Adobe Reader makes it a lot worse. In fact, I had to set up the adobe reader to not run within the Firefox window. I had to back off to an old version of adobe Reader and Flash Player to accomplish this. I love Firefox. I was disappointed to have to uninstall it as it was impossible to run searches with it.
    So then it proved to be that IE either version 8 or 9 was even worse. I could not keep it up long enough to run a search.
    So I installed Chrome which has some nice features, but it also crashes, albeit more gracefully so I do not lose my place and it makes a quick recovery but there are many online applications where Chrome just does not work.
    My son also has Win7 64 bit and says he is also having the same problems.
    I want my Firefox back! Please fix it.

  • Can't install windows seven on lion...

    Hi!
    Configuration is:
    macbook pro 15" 2011
    mac os Lion 10.7.2
    bootcamp is 4.0.1
    My windows Seven licence is a MSDNAA licence with sp1 included ...
    I can't install it.
    I define 30Gb partition for windows using bootcamp. It formats the partition then reboots and problem occurs at this step.
    On display, following message occurs:
    "No bootable device -- insert boot disk and press any key"
    I tried differents ways...through dvd or usb key but each time problem occurs...
    Windows seven is an iso file downloaded from Ms website. Using bootcamp, I select the iso file and choose USB 2.0 flashdrive (4Gb) as target.
    any idea ?
    thanks in advance
    Nicolas

    ## Burn the iso to a dvd using Disk Utility, burn at the slowest speed
    hi, thanks for your answer  and for your inputs about partition size.
    btw at that time I can't install os.
    before to burn again a dvd, what kind of file, bootcamp will manage as source file? operating system as an iso file ?  operating system boot disk ?
    the first option of the bootcamp menu stipulates you have to provide an iso file (as source) and an usb key (as target). That's what I made. result was an usb key with OS distribution inside (files and directories and subdirectories.
    I test it on a windows laptop. it works as bootable usb key .....
    but not with bootcamp on my macbook Pro!!! After partitioning when bootcamp process reboots, the message is
    No bootable device -- insert boot disk and press any key
    but yes it, it's bootable usb key !!!  it seems to me  it only checks dvd device but not usb key device.
    if we do not use usb key but dvd, what kind of file bootcamp is waiting for ? iso file, bootable disk ??
    not clear for me ....
    Regards

  • Need help to find drivers for Sound Blaster X-Fi MB windows seven 64bit

    hello!,
    I have a Creative Sound Blaster X-Fi MB card which is given whith the Foxconn motherboard BloodRage,it worked fine under windows vista 64 bit,but now with windows seven 64 bit when I go of "creative console laucher"? or "creative Audio console" "karaoke"?no works.(media source and wave studio seems ok)
    I tried to find drivers for windows seven 64 bit but I can't find this sound card in the list of products.
    thank you for your help

    great!!!
    I'm going to test it immediatly....
    hope it's ok.....thanks for the very quick answer

  • Windows 7 XP mode

    I am going to buy a new workstation(preferably DELL). In that, I would like to use a software that only runs on Windows XP SP 2. I have Win XP OS but I'm not sure whether the drivers will match with the new hardware.
    I need your suggestions for this issue. 
    I am using virtual PC and XP mode in Windows 7 Ultimate. I downloaded these softwares from microsoft website.
    The XP mode, it runs on Win XP SP 3. But, I need SP 2. Is there any solution for that?  
    I would like to know how to do disk partition in the system that has Virtual PC.  
    Suggest me any solution for this issue ASAP.

    It's important to know that virtual machines are typical emulated. If you install a virtual XP, you don't need to try find drivers for example a display driver for a physical device.
    So, drivers will work if the drivers are working in the host machine.
    The XP mode, it runs on Win XP SP 3. But, I need SP 2. Is there any solution for that?
    Hopefully this helps you.
    https://social.technet.microsoft.com/Forums/windows/en-US/e77c837d-bf4b-4a3a-a33b-a85d1a52008f/can-windows-7-xp-mode-install-xp-sp2-instead-of-sp3

  • Can't create a Windows Seven USB drive using Bootcamp

    Hi! I ve been trying to create a Windows Seven bootable USB drive using the Bootcamp Assistant. I tried to create it using an ISO of my Windows DVD in order to install it on my new Mac Mini. My problem is that I get an error: Your bootable USB drive could not be created, an error occurred while copying the windows installation files. My USB drive is 8G, and I‘ve tried with a 100G external HDD too... So it‘s not a size problem. I also tried to format the drive different ways without any success... I found lots of threads relating to this problem but none of them had a solution. Any clues? Thanks in advance!

    You can create a bootable usb via bootcamp

Maybe you are looking for

  • The operation could not be completed because an error occurred when creating frame 2829 (error -1)

    I'm getting this error code in Final Cut Pro.  The operation could not be completed because an error occurred when creating frame 2829 (error -1). What does this mean and how can I fix it?  This code comes up when exporting. 

  • How to use Acrobat 9 standard to create a PDF form that an Acrobat reader can save

    Hi, I'm evaluating Acrobat 9 standard edition. I want to create a PDF with a form that allow Acrobat Reader users to fill in the form and save to their local machine. I looked at "Can I save a filled out PDF form using the free Adobe Reader? " Howeve

  • Requirement around split deals

    Hi All, We have a requirement wherein we need to split a Master Opportunity to sub Opportunities with minimal user intervention. For example a Master Opportunity is created for USD 1000 with a validity period of 2 years. A sub opportunity is created

  • Error configuring identity management

    Hi, i´ve installed a middle tier instance of AS 10g , and i want to register it into a oid instance, but when i try to do this trough EM it fails and show the following information in the logs, could anobody help us, I'm sure that the oid is up and r

  • Xcelsius 2008 and Flex SDK

    Hello all, I'm new to Xcelsius and Flex SDK and I don't get any information about that: For what do I exactly need Flex SDK? Only if I want to implement a new template for Xcelsius like a "better" property-panel? I also want to know, when I want to s