Windows Sharing and resource fork problems

Hello, I am into my second month of Mac ownership and today I tried to enable Windows Sharing to allow a PC here to map to the Mac and share files.
I enabled the Windows Sharing feature in the System Preferences. Then I tried to map to the mac using the PC (Win XP). The PC sat there for a while (maybe about 30 secs or so) trying to connect, then displayed an error message saying a semaphore timed out (I don't remember it exactly).
Anyway, I went back into System Preferences and all the options for Sharing were greyed out. I couldn't turn off or turn on anything!!
So I looked in the console log and found the following errors:
2006-08-30 18:12:40.119 System Preferences[15066] [NOTE: this exception originated in the server.]
couldn't fork
/sbin/service: fork: Resource temporarily unavailable
2006-08-30 18:12:43.336 System Preferences[15066] [NOTE: this exception originated in the server.]
couldn't fork
/sbin/service: fork: Resource temporarily unavailable
2006-08-30 18:12:52.009 System Preferences[20541] hardwareCheckThread got an exception name:NSInternalInconsistencyException reason:couldn't fork
Aug 30 18:13:37 localhost launchd: org.samba.smbd: fork() failed, will try again in one second: Resource temporarily unavailable
2006-08-30 18:16:53.360 System Preferences[21610] hardwareCheckThread got an exception name:NSInternalInconsistencyException reason:couldn't fork
2006-08-30 18:19:13.214 System Preferences[21611] hardwareCheckThread got an exception name:NSInternalInconsistencyException reason:couldn't fork
2006-08-30 18:31:48.547 System Preferences[21636] hardwareCheckThread got an exception name:NSInternalInconsistencyException reason:couldn't fork
2006-08-30 18:54:23.310 System Preferences[21650] hardwareCheckThread got an exception name:NSInternalInconsistencyException reason:couldn't fork
In the System log there are a whole bunch of these messages:
Aug 30 18:11:23 localhost kernel[0]: proc: table is full
I went into the Terminal and tried to get to a command prompt but it just sat there with a blank screen.
So I shut a bunch of apps I had open down only keeping Firefox open and I searched online for issues regarding this error - found information telling me I could kill the smbd processes and up the max proc limit.
After waiting a while (didn't want to reboot - I'm stubborn :-)), reopened Terminal and could see the command prompt. But anything I tried to do regarding killing the smbd processes or even doing a directory listing or a process listing gave the error: fork: resource temporarily unavailable
So I just waited it out - eventually I was able to kill the smbd processes. After I did that, I went back into System Preferences and was able to work with the Sharing preferences again (I disabled Windows Sharing).
And after all that, here is my question(s):
- is this problem going to keep happening when I turn on Windows Sharing and a PC tries to map to the Mac?
- do I need to up the process limit if I'm going to turn on Windows Sharing?
- is there a bug/issue I don't know about regarding this and a fix?
- and last but not least, am I doing something wrong?
Thank you for your help.

There were some Macbook/SMB specific problems that suppossedly got fixed with the 10.4.6 update, but I'd try the 10.4.7 Combo Update, as Deltas have more problems.

Similar Messages

OSX and Windows Server 2000 resource forks

Our shop is 95% OSX with a Windows Server 2000 server. There is one application that is sensitive to image file resource forks copied to the server. When the app does a particular operation if there are resource forks in the folder the operation fails.
Is there a way to either strip the forks on the copy operation? Or is there a way to block them in Windows Server?
BTW, the application is a dedicated print server RIP linked to a Durst photographic printer running on Windows XP.
G5 Mac OS X (10.4.6) Windows Server 2000
G5 Mac OS X (10.4.6) Windows Server 2000
G5 Mac OS X (10.4.6) Windows Server 2000

I feel your pain. I have been dealing with the same thing and found the following options:
Try turning on "Services for Macintosh" or SFM on the windows server. I am NOT a windows guy I have had mixed results when my LAN folks have done this for me. In some instances the ._rsrc files don't appear, and this won't fix long name issues if you are having them.
Another way to go w/o touching the windows server...third party.
Path Finder 4: http://www.cocoatech.com/pf4
Blue Harvest: http://zeroonetwenty.com/blueharvest/#faq
KopyMac 2.6.1b: http://www.tcsn.net/mont/index2.html
I have not tried the third party solution yet. I am still convinced there must be some way to have the mac just stop creating the files, but so far I have nothing. The only article apple has that is remotley related addresses .DS_Store files and NOT the ._rsrc files. I tries the edit to com.apple.desktopservices.plist and I still had a server full of ._bsfile.
Hope this helps, and if anyone out there has the 100% mac solution PLEASE share.
PowerBook G4 Mac OS X (10.4.6)

Windows Vista and WiFi networking problem with MackBook Air

Hi, everyone!
Thanks in advance for the following help.
For some specific programms I need Windows Vista to be set up on my MacBook Air.
The problem with Broadcom WiFi adapter.
While moving large files over home network it hangs and looses the wifi network. It works OK while surfing the internet or doing other low traffic job. But when it comes to 2 MB/sec transfer it doesn't work. I tried two different routers, no positive result. PC works propely on any file sizes. After booting the Leopard the problem goes away. So it is onle Windows Vista problem.
May be drivers? I tried 4.170.25.19 Windows Vista drivers from Broadcom - it didn't help. But I am not goog in driver settings in Control Panel, so may be the solution is there.
Any ideas how to solve it?
Thanks for help in advance.
Andrey.

Hello Nescom. Welcome to the Apple Discussions!
I'm afraid I really don't have an answer for you but I can offer my experiences with large files transfer with Vista. My current home network is a combination of Windows PC, Windows Servers, and Macs. Large file transfers between most of them have relatively the same performance, except when transferring large files from the Vista PC to any other OS. It is demonstrably slower. Interestingly, transfers between Vista machines does not appear to be a problem. I understand that this is a known problem by Microsoft and was supposed to be fixed with Vista SP1.
So the problem might not be your network, but Vista itself. I'm curious if you have this problem when transferring large files to another Vista device?

Windows 7 and iTunes 9 - problem connecting to Airtunes to stream music

I have a new laptop with Windows 7 and iTunes 9. iTunes recognizes my Airport Express (AE green light lit, and shows up in lower right of iTunes when choosing which speakers to play), but I cannot connect - just hangs on "Connecting to User's Wireless Music Airport Express" (name of the Airport Express network added to my existing Wireless network). No error message. Thus, unable to listen to my music through my hi-fi stereo. It's killing me!
Tried a few things: disabling firewall, unplugging, resetting AND reconfiguring the AE, no luck.
Anyone else having this problem? Any suggestions? Thanks

Figured it out - just needed to add iTunes to 'trusted applications' in Kaspersky Antivirus/Firewall..
Simply launch Kaspersky > Settings > Threats and exclusions > Exclusions Settings > Trusted applications > Add > "C:\Program Files\iTunes\iTunes.exe > select all exclusions > OK.
Also added Airfoil and now able to stream Pandora through my stereo!

Y500 dual boot windows 8 and fedora 19 problem

I bought a y500 two days ago and i wanted to dual boot windows 8 and fedora 19, so here's what i did
1. downloaded fedora 19 (x64) iso from the fedora website.
2.made a live USB using live usb creator.
4.opened disk management utility and shrunk the c drive (windows 8 was installed here) by 100 gb and kept the 100gb unallocated.
3. started the laptop with novo button, changed the bios config to boot from usb.
4.installed fedora from usb, selecting the 100gb unallocated memory for installation
5.restarted the laptop.
now the problem is fedora works perfectly but when i try to boot windows 8, the following error is shown.
windows failed to start
file:\BOOT\BCD
status: 0xc0000225
info:the boot configuration data for your PC is missing or contains errors.
i am guessing the fedora installation overwrote the boot files of windows and
i have not taken a backup. please help

hi,
I have a Y500 and I wanted to dualboot fedora 19 with windows 8, this proved to be unsuccessful. I had made a repair disk before the process (but not a set of recovery disks unfortunately >.< ). now I inserted the repair disk and selected the automatic repair option, it showed a message that auto recovery has failed. now when I pressed the NOVO button and selected the system recovery option, it does not go into the OKR menu but continues with the normal booting process. Can somebody guide me or give links where I can find step by step instructions to making OKR work and reset my laptop to factory settings? PLEASE help As Soon As Possible
NOTE: I did resize the windows 8 os partition but the recovery and the lenovo partition are still untouched

Dual Boot windows 32bit and 64bit overclocking problems

Im pretty new to overclocking and this is my first try I manage to get my AMD Venice 3200 to hit 2500 with 250fsb X 10, HTT 4, vcore 1.44. I used memory divider 166/200 so the memory is running at 208MHz not alot of overclocking on the memory since it is some cheap brand.
My problem is that I have dual boot and with windows xp everything is fine CPU-z reports the right speed for the cpu and memory when I overclock, and there is an increse in preformance with overclocking, But when I boot windows XP 64bit CPU-z reports the FSB as 200 so it is not showing any change, it does report the change in the memory divider 166/200 and the cpu voltage increased that I applied to overclock. The thing is that when I open systerm properties it shows the CPU speed as 2500MHz but when I test the preformance there isnt any increase. I used Superpi to test preformance and in windows XP 32bit it finishes the 1M test in 36seconds while in Windows XP 64bit it takes 42seconds.
My system specs are
AMD Venice 3200
MSI K8N Platium bios 1.8
1024MB Wintec Memory 3200
Geforce 6800 GTO 400/1100
OCZ ModStream OCZ52012U 520W Power Supply

Im runing the final release of Windows xp 64 and cpu-z 1.30, I also have Everest Ultimate Edition and it only shows 3% overclock 205 FSB. Im thinking of formating the HD with windows 64 and installing it again with the systerm already overclock.

Windows 8 and NACAgentToastApp.exe problem

Saludos foro
Tengo una aplicación NAC fuera de banda version 4.9.3 funcionando correctamente con clientes Windows 8 y clientes windows 7. La version de agente NAC es 4.9.3.5, el problema que tengo es con todos los clientes Window 8 y el ejecutable NACAgentToastApp.exe
Tengo los siguiente errores en el visor de eventos.
Greetings forum
I have an application NAC OOB version 4.9.3 working properly with Windows 8 client and Windows 7 clients. The NAC Agent version is 4.9.3.5, the problem I have is with all customers Window 8 and the executable NACAgentToastApp.exe
I have the following errors in the event viewer.
Nombre de la aplicación con errores: NACAgentToastApp.exe, versión: 0.0.0.0, marca de tiempo: 0x506a06aa
Nombre del módulo con errores: NACAgentToastApp.exe, versión: 0.0.0.0, marca de tiempo: 0x506a06aa
Código de excepción: 0xc0000409
Desplazamiento de errores: 0x001b0b59
Identificador del proceso con errores: 0xc98
Hora de inicio de la aplicación con errores: 0x01ceaf0058b6d2f1
Ruta de acceso de la aplicación con errores: C:\Program Files (x86)\Cisco\Cisco NAC Agent\NACAgentToastApp.exe
Ruta de acceso del módulo con errores: C:\Program Files (x86)\Cisco\Cisco NAC Agent\NACAgentToastApp.exe
Identificador del informe: 9667b97e-1af3-11e3-be98-80c16ef6536e
Nombre completo del paquete con errores:
Identificador de aplicación relativa del paquete con errores:
Greetings forum
I have an application NAC OOB version 4.9.3 working properly with Windows 8 client and Windows 7 clients. The NAC Agent version is 4.9.3.5, the problem I have is with all customers Window 8 and the executable NACAgentToastApp.exe
I have the following errors in the event viewer.
Nombre de la aplicación con errores: NACAgentToastApp.exe, versión: 0.0.0.0, marca de tiempo: 0x506a06aa
Nombre del módulo con errores: NACAgentToastApp.exe, versión: 0.0.0.0, marca de tiempo: 0x506a06aa
Código de excepción: 0xc0000409
Desplazamiento de errores: 0x001b0b59
Identificador del proceso con errores: 0xc98
Hora de inicio de la aplicación con errores: 0x01ceaf0058b6d2f1
Ruta de acceso de la aplicación con errores: C:\Program Files (x86)\Cisco\Cisco NAC Agent\NACAgentToastApp.exe
Ruta de acceso del módulo con errores: C:\Program Files (x86)\Cisco\Cisco NAC Agent\NACAgentToastApp.exe
Identificador del informe: 9667b97e-1af3-11e3-be98-80c16ef6536e
Nombre completo del paquete con errores:
Identificador de aplicación relativa del paquete con errores:
¿Que puedo hacer para mitigar este error?
What I can do to mitigate this error?

•1.     Verify that UAC (User Account Control) is enabled.
•2.     Verify that Internet Explorer is running in Administrator mode.
•3.     Verify if some active X fucnction fails and try to reset all the IE and active X permissions to default.
•4.     Verify if any other Anti Virus (AV) software prevents IE from launching its executable from its temporary directory.

SAP EP - Windows 7 and IE 8 problem

Hi all,
Sorry to disturb all of you.
I'm confronting a ridiculous problem.
Some of my clients are using Windows 7 and IE8. The EP is working fine.
However, there is somewhat of PCs don't work with Windows 7 and IE8 the browse will hang and became idlely.
Then I had tried to open EP in Firefox but It worked like a charm.
May I know is there any solution to resolve my problem.
Thank you very much.

Hi,
I just got the same question. Below I capture the reply from OSS for your reference.
I have checked the SP level for your system which is SP12, I would like you to check attached PAM for NW7.0,
if you would like to use Windows7 and IE 8.0, the SP level could be not lower than SP21,
more detail please refer to attached the PAM file page 16 and page 17.
The PAM could be found in above reply. :P
PS: the compatibility mode of IE8 could not fix all the problem which happen when using the Portal.
cheers,
Gary

Windows, RAC and network card problems... ?

Dear friends,
I've a problem! :)
Here are some info:
Node Hardware:
     Processor: Intel(R) Xeon(R) CPU E7430 @2.13GHz (2 processors)
     Installed memory(RAM): 52.0 GB
     System type: 64-bit OS
     Windows edition: Windows server 2008 R2 Enterprise
Network cards (Shown by WIN):
     PublicLAN: HP NC373i Multifunction Gigabit Server Adapter
     PrivateLAN: HP NC373T PCle Multifunction Gig Server Adapter
     Offline: HP NC373T PCIe Multifunction Gig Server Adapter
Software:
     Windows 2008 R2 Enterprise (Very last updates from MS)
     Oracle RAC 11.2.0.2.0 (Clusterware, DB) – 2 nodes
Environment:
     AD network. Everything is MS based.
Problem description:
During RAC installation, company had only one network card (server network card, per node). Installation was successfully finished. RAC was/is in production. Has some problems, but noting for alarm.
This days, we get other network cards. (purpose: network redundancy).
RAC shutdown was clean.
Network card inserted to nodes by OS Admin.
Nodes was started up... and...
OS Admin disabled network card immediately after logon screen was available... but to late...
Windows changed network card order!!! PublicLAN was not at the first place when Cluster started (Network and sharing center -> change adapter settings -> Advanced (from menu) -> Advanced Settings -> Adapters and Bindings)!!! (I found in logs that MAC address changed at this point!)
Cluster started hardware reconfiguration... and... we could not stop CW till starting up finished... ! After stopping CW again, we set PublicLan at first place, and every win setting was as at the moment of installation.
Cluster was started again, DB, OEM too...
Everything is working. Client can connect to DB, applications work well... but...
Damage is done... now we have totally new IP situation inside... changes are saved to the DNS, too!!!
Before inserting network card IP settings (nslookup from any client) :
rac1 192.168.217.60
rac1-vip 192.168.217.62
rac2 192.168.217.61
rac2-vip 192.168.217.63
rac-scan 192.168.217.64
192.168.217.65
192.168.217.66
After this incident (nslookup from any client):
rac1 192.168.217.60
192.168.217.62
192.168.217.64
192.168.217.66
rac2 192.168.217.61
192.168.217.63
192.168.217.65
192.168.217.66
VIP and SCAN IP address are the same as before...
nslookup show as that rac1,rac2,rac-scan change IP addresses in round-robin scenario!!!
We stopped RAC couple of time and OS Admin cleared DNS records (both zone)... but every start of cluster make changes again in DNS.
Other "side-effects":
Some cluster commands, invoked from CMD, fire errors (lsnodes, cluvfy comp nodecon -n rac1,rac2).
Configuration files seem to be correct (listeners, scan, scan_listeners, etc). srvctl and crsctl command are working without errors. oifcfg too.
Logs are full of errors (like: ASM could not be reached... no listener)
Listener(s) stop working sometime...
Relocation of resource are not possible.
Well, I mentioned the most important things... other alerts and errors in logs are present, but everything is connected with this issue, I think...
As I said: RAC working. Clusterware, DB, OEM, connections, applications, backup... everything look good... but we have a problem!!!
Any ideas, any suggestion, any link, any advice, anything are welcome!
Thanks!
PS.
Metalink haven't any document about this... I've found a lot of examples for changing IP's, interfaces, interconnection... but noting about fixing problem!

I'm having the same issue. My desktop pc keeps dropping the connection to my network (airport extreme router) while the rest of my devices (macbook pro, xbox, mac mini) still stay connected. The pc never had this issue prior to installing Windows 7 so im guessing there must be something with the Windows 7 OS.

Windows 7 and WRT54GS2 connectivity problem

I have a WRT54G2s router - I currently have a XP laptop and Brother printer working wirelessly with this router. I received a new computer that is running windows 7. I can see the router at full strength and am able to connect to it but once I connect the signal is reduced to one bar and never increases. When I see the network before connection it shows at full strength. Any insight as to why this is happening? I have tried disconnecting all other devices from the router to see if there is interferance - also sitting right next to the router the same thing happens. I can hardwire with ethernet calbe and it works fine but once I try wireless - again the W7 computer sees it at full strength but once I make a connection it is so weak I can barely get an internet connection. Please help - this is incredibly frustrating - I have updated to the latest version of firmware and when I try and use the network troubleshooter in windows it tells me it cannot detect the problem and sends me to a website that is of no help.

Did you tried to connect to any other network and checked if you are facing the issue?
Well make sure that you are using Security Mode as WPA2.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbors network...
- Set the Wireless channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
NOTE : Passphrase should be more that 8 characters...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
Now see if you can locate your Wireless Network and attempt to connect...
This should fix the issue for you.

Windows 7 and Airport Extreme problems

I've switch the airport extreme a few months ago, from a linksys router. Ever since switch my pc laptop drops/loses the wireless connection. The PC is running Windows 7. I have taken the laptop to another place that has a wireless network and never lose a connection. It will connect fine, just every so often it will drop the connection.
However my MacBook Pro and PS3, both connected over the wireless network never lose connection. And I do a lot of online gamine and it works great. Can anyone point me in the right direction on fixing the problem?
Thanks

I'm having the same issue. My desktop pc keeps dropping the connection to my network (airport extreme router) while the rest of my devices (macbook pro, xbox, mac mini) still stay connected. The pc never had this issue prior to installing Windows 7 so im guessing there must be something with the Windows 7 OS.

Windows 7 and surround sound problem

Hi,
I have recently installed Windows 7 Ultimate x64 edition on my desktop PC.
I have Creative Audigy 4 Pro with the external panel and Creative Gigaqworks S750 speakers.
The problem is that the speakers play only in stereo mode (only front 3 speakers) although I have set the speakers to play in 7. mode from audio console and speaker settings.
Whether I lsiten to music or play games it's the same.
Please note that I have downloaded and installed the latest drivers from creative website (Creative Sound Blaster Audigy series driver 2.8.00).
Any ideas anyone how to fix this?
Cheers

(? Hi mate,
I was lucky enough to find the solution to the problem quite fast thanks to a reply in another forum.
All you need to do is download SB Audigy Series Support Pack 3.6 (/09/2009)
The link to get more info about these modded drivers is here:
<a rel="nofollow" target="_blank" href="http://forums.creative.com/t5/Sound-Blaster/SB-Audigy-Series-Support-Pack-3-6--09-2009/m-p/540934"]http://forums.creative.com/t5/Sound-Blaster/SB-Audigy-Series-Support-Pack-3-6--09-2009/m-p/540934[/url]
The link to actually download the drivers is here:
<a rel="nofollow" target="_blank" href="http://www.supashare.net/nn2jkorp6yz"]http://www.supashare.net/nn2jkorp6yz[/url]
<a rel="nofollow" target="_blank" href="http://rapidshare.com/files/304598/Audigy_SupportPack_3_6.exe"]http://rapidshare.com/files/304598/Audigy_SupportPack_3_6.exe[/url]
Hope this helps
Cheers!

Service Bus 1.1 for Windows Server and AMQP connetion problems

I am having an issue making AMQP connection to Service Bus on my local Network. Service Bus 1.1 has been implemented on a development box Windows Server 2012 using SQL Express. The Windows Firewall is wide open for testing. The SB certificates
have been copied down to the client machine.
The connection to the topic using other than the AMQP protocol works just fine but as soon as the transport is changed to AMQP, the following is received
Error 10054 "An existing connection was forcibly closed by the remote host."
I have tried to change the connection string ports to reflect the AMQP settings to no avail.
The same code works in Azure using AMQP, but the STSEndpoint is not present for that code.
The STSEndpoint comes from the connection sting generated by the WS SB Management Portal.
I am sure that I missed a step or that if a certificate is added somewhere this should work.
The AMQP is an important item as if it is not made to work, a different messaging platform will have to be implemented at quite a large cost ie Red H4T. Using Azure outright is not an option either.
Any assistance would be appreciated.

I think I found the problem, and it is in the connection string. you have probably just added the ;TransportMode=Amqp to the connection string in order to change the connection type to AMQP. However, you also need to change the runtime port to 5671.
<add key="Microsoft.ServiceBus.ConnectionString" value="Endpoint=sb://servicebus...net/TestNamespace;StsEndpoint=https://servicebus...net:9355/TestNamespace;RuntimePort=5671;ManagementPort=9355;SharedAccessKeyName=RootManageSharedAccessKey;SharedAccessKey=XXXXX/E=;TransportType=Amqp" />
See also:
http://stackoverflow.com/questions/27986958/using-aqmp-with-on-prem-windows-service-bus

Windows 7 and Arch (GRUB problem)

Hello I'm a new user in Arch and almost new in linux (well i need to work at university with linux so i'm not such a newb). I was using Windows 7 for a while and i installed Arch linux for programming. Everything installed very well and i really like Arch linux. But there is one problem, when GRUB boots i can choose between Arch and Windows and while i boot Arch everything is Ok, but the problem is when i boot Windows and it disables my GRUB (GRUB is installed in boot partition 200mb) well not disables, but just takes of Boot option (flag?) from boot partition and GRUB doesn't loads. so all the time after Windows usage i must run cfdisk and make boot partition bootable and remove root from windows.
Maybe anyone knos how to solve this problem or they have encountered such problem and fixed it.
If u need any code from GRUB say i will post it later, now i need to finish program in Windows.
P.S. i have surfed/serached forum for few days about such problem and found nothing... (maybe i'm blind?)

Firstly, normal people (atleast those i have communicated) don't critisize for grammar mistakes because everyone makes such mistakes. Second i prefer my mother langue more than other and i don't even bothered to learn english like i learned lithuanian langue.
Secondly, yeah if you would read news about computing and etc. you should know that there isn't full windows 7 there is windows 7 BETA, well i personally just forgot that work(mistake maybe? or i prefer not to say beta words with programm because i work mostly with beta programms).
And yeah Windows 7 was first installed (doh, if you would think more that fact would be clear because i wrote "I WAS using Windos 7 for a while..."

Windows xp and java.exe problem

Hello all..
I tried to execute have a batch file consisting a jar file and classes in windows xp platform. I used j2sdk1.4.0_03. All my classes are stored in : C:\MyDocument\Softwares\classes directory
and the jar files are in: C:\MyDocument\Softwares.
I wrote the following commands in the batch file:
java -classpath C:\MyDocument\Softwares\classes;
C:\MyDocument\Softwares\jexcelapi.jar mainClass
When I lauched that batch file, a message came out:
java.exe has encountered a problem and needs to close. We are sorry for the inconvenience.
Could you tell me where the problem is and why? Do I need windows xp patch to eliminate the problem? And where can I find that patch?
Thanx for any suggestions...
Richard

Thanks for your comments. I have tried to reinstall the J2SDK, but then another error message appeared:
Error occured during the initialization of VM
java/lang/NoClassDefFoundError:java/lang/Object
I've checked my Path and it's set as following:
C:\j2sdk1.4.0_03\bin;
and my classpath setting:
C:\MyDocument\Softwares;C:\MyDocument\Softwares\classes;C:\j2sdk1.4.0_03\lib;
When I tried to execute the java command in any directory (inclusively in C:\MyDocument\Softwares) I always got that message. The only directory where I was able to run the command is in C:\j2sdk1.4.0_03\bin;
Before I did the reinstallation, I never had such a problem.
Have any hits? Thanks in advance..

Windows Sharing and resource fork problems

Similar Messages

Maybe you are looking for